I N D E X

HARVESTERS
Wheeled
CAT 550, 570 & 580
Enviro Thinning
Fabtek FT 663
Hemek H 16
John Deere 1070D
John Deere 1270D
HARVESTERS

Logset
Ponsse Beaver
Ponsse Ergo
Prosilva
Rottne
Sampo Rosenlew 1046X
Silvatec
Tigercat H09
Timberjack 770
Timberjack 1070
Timberjack 1270D
Valmet 901.2
Valmet 911.1
Valmet 921.1

Tracked
Fabtek FT 133
Fabtek FT 153
Kubota
Neuson
Neuson 11002 HV
Tigercat H845B
Timberjack 608B/608B-HD
Timberjack 608L/HTH620
Valmet 500T
 I N D E X
Crane
Cranab CRH 12
Foresteri H570
Foresteri H1195
HARVESTERS

Hypro 755
Hypro 500 LS
Patu III H460
Waratah CH95
Waratah CH135
Waratah CH175
Enviro Thinning Harvester

ENGINE
4-cylinder water-cooled turbo engine IVECO 7450; split-box with clutch; pumps for working hydraulics and
transmission built together in a compact unit. Output @ 2100rpm:88kW(120hp) Torque @ 1400rpm:
460Nm (339 ft-lb), Fuel tank capacity: 150 liters.

POWER TRANSMISSION
4-speed hydrostatic/mechanical transmission
incorporates 2-speed geared drop box; 2-speed
hydrostatic motor; manual differential locks.
Hydrostatic system is fully separated from the working
hydraulics with separate oil reservoir; cooler and filter.
50-liter capacity.

BRAKES
Brakes on all wheels through hydrostatic transmission.
Service brakes hydraulically applied automatically on
all wheels when machine is stopped. Emergency
brakes spring applied.

WHEEL EQUIPMENT
Standard: 500/65x26.5, W=2000mm

HYDRAULIC SYSTEM
Two separate systems: one for the working hydraulics and one for the transmission.

WORKING HYDRAULICS:
Unloaded constant pressure system. JIC hydraulic fittings. Dis-engageable hydraulic pumps. Pump
Capacity: 200 liters/min @2000rpm. Working pressure: 210 bars (3045psi).
FILTERING ELEMENTS
High-pressure: 25 micron
Return: 25 micron
Case Drain: 7 micron
Reservoir Capacity: 150 liters.
Low-level indicator light for oil level.

STEERING
Articulated steering joint with double steering cylinders. Max. Steering
Angle: +/- 45°.

FRAMES
Automatic mid-joint oscillation lock. Oscillation of +/-20°.

CAB
Meets ROPS/FOPS/OPS requirements. Cab tilt of +/-15°. High efficiency
Red Dot A/C and heating system. Lexan / Margard windows, Spring-
cushioned, electrically-heated operator's seat.

LOADER Mowi 465

Reach with Logmax 3000 6.0 - 6.3m Reach with Logmax 828 6.6m Lift torque 55.0 KNm
Lift capacity at full reach 575 kg
Swing angle 220°
Tilt-base angle -15°/+25°
Swing torque 12 kNm

HARVESTING HEADS
Logmax 828 or 3000 w/Logmate 400 Control System. Saw capacity Weight Rotator
Logmax 828 410mm 390kg GV-3
Logmax 3000 500mm 525kg GV-4

WEIGHT
Version I: 7580kg with Logmax 828, GV-3 Rotator and 500/65 x 26.5 wheels
Version II: 8040kg with Logmax 3000, GV-4 Rotator and 600/55 x 26.5 wheels

EQUIPMENT
Automatic Fire Suppression System; AM/FM Cassette Radio; one-unit 10-lb ABC Fire Extinguisher.

OPTIONAL EQUIPMENT
ELECTRICAL SYSTEM
24 Volt system; 1 x 175 Amp alternator;
EHC-35 Loader Control System with
Cat Skull Levers; 19 x 70 watts working
lights; 2 x 950 Amps batteries
Wheels: 600/55 x 26.5 or 700/50 x 26.5
Wheel chains
Sun curtains
Parts kit
 H 16 Harvester

- Versatile for both thinning and final felling -

The HEMEK H 16 is a powerful harvester for both thinning and final

fell applications.
The design has been improved with stronger steel construction in
both the front and rear chassis and a new front bogie.
The H 16 is powered by a Scania DSI 9 turbodiesel engine with
intercooler, rated at 246 hp.
Independent tests have shown that the self-leveling Pendo cab
increases productivity. The cab rotates for unparalleled visibility.
Vertical dampening further enhances operator comfort.
The hydraulic system has three dedicated pumps for the drive, crane
and harvester head functions.
The standard Mowi crane is patented with an inner lift beam to
provide excellent lifting force, even at full crane extension.
 H 16 Harvester
TECHNICAL DATA

The information refers to standard

machine versions. The illustrations
may show a machine with other
equipment. We reserve the right to
change technical specifations without
prior notice.

ENGINE
Scania DSI 9, 6 cyl. Turbodiesel,
181 kW (246 hp), with 900 Nm torque
at 1480 rpm.

POWER TRANSMISSION
H 16
Hydrostatic-mechanical drive with
control equipment HTC and 2-gear
Power shift gear box.
Gears: High and low CABIN
Drive speed: 0-25 km/h ELECTRIC SYSTEM Pendo-cab, horizontally self-aligning
Traction power: max 200 kN Voltage: 24 V Vertically damped and hydraulically
Battery capacity: 2 x 140 Ah rotational; Hydraulic tilt for service
AXLES Altenator: 2 x 65 A Polycarbonate windows with sun
Front: Single axle with Work lights: 30 lux in protection
differential lock work area Combined heater/airconditioner
Stereo radio/cassette, Blaupunkt
Rear: Bogie with differential FUEL TANK Be-Ge 9000 reinforced seat,
lock Volume: 500l electrially heated, friction arm support
FRAMECO.
Front optional: Bogie with differential FIRE SUPRESSION
lock Fixed mounted sprinkler system of STANDARD EQUIPMENT
approved type Electric throttle. Thermostat controlled
BRAKES Hand-held fire extinguisher, 2-piece cooling fan. Electric pump for changing
Front: Oil immersed, hydraulic oil in engine. Electric pump with a filter
disc HYDRAULIC SYSTEM for refilling of hydraulic oil to tank.
. Gear pump for cooler fan and Aircompressor. Hydraulic ladder. Tow
Bogie: Oil immersed, hydraulic brake system. ring front and tow bar rear. Rear light
disc Load sensing system ramp. Service ladder. Pivot key. Test
Emergency Pump capacity head: Linde 160 cc instument, pressure gauge. Filter set.
brake: Spring applied, hydraulic Pump capacity crane: Linde 105cc Crane tilt.
release Alignment valve: Voac K-170
Working pressure: 190-250 bar OPTIONAL EQUIPMENT
Braking power, travel brake: 190 kN Hydraulic tank volume: 100 l Diesel heater, Vacuum pump for the
Braking power, emergency brake: hydraulic system. DASA production
160kN CRANE software. Spare wheel. Field reparation
Type: Mowi 1600L kit. Liquid filling of wheels. Band and
Reach: 10 m slip protection.Color marking, 2 colors.
WHEELS Lift @ max reach: 1100 kg
Front axle: 600x34” Swing torque, gross: 34 kNm ALTERNATIVE EQUIPMENT
alt. 23,1x26” Rotator: Indexator AV 12S Alt. wheel equipment, alt. driver seat,
alt. 700x34” Crane steering H 16: SAKAE- Woodking 650
minislevers with
Bogie rear 600x26,5” PVC-control unit.
alt. 22x25”
alt. 700x26,5” HARVESTER HEAD
MEASUREMENT SYSTEM
Bogie front: 600x26,5” DASA 380C, value/distribution
alt. 22x25” adjustment.
alt. 700x26,5” Price matrices: 8 /type of wood
Length classes: 11 /price matrix
STEERING Diameter classes: 18 /price matrix
Articulation: ± 42° Box 139, 840 93 Hede, Sweden
Qualities: 6 /type of wood
Power steering and electrically Price types: 4 /price matrix Tel:+46-(0)684-656 00
operated terrain steering Color marking: 3/price matrix Fax:+46-(0)684-656 01
Printer memory card www.tigercat.se
Tel: +1-(519) 442-1000 (Canada)
www.tigercat.com
TECHNICAL DATA
Weights Hydraulic System
Total weight. . . . . . . . . . . . . . . . 6H: . . . . . 15500 kg Type . . . . . . . . . . . . . . . . . . . . . . . . . load sensing
. . . . . . . . . . . . . . . . . . . . . . 8H: . . . . . 17500 kg Hydraulic pump. . . . . . . . . . one variable displacement pump
Flow/1000 rpm . . . . . . . . . . . . . . 6H: . . . . 0-170 l/min
Dimensions 6H . . . . . . . . . . . . . . . . . . . . . . 8H: . . . . 0-190 l/min
Width . . . . . . . . . . . . . . . . . . . . . . . 2500-2880 mm Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Mpa
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 7100 mm Hydraulic oil is filled through the filter with electric pump
Height . . . . . . . . . . . . . . . . . . . . . . . . . . 3700 mm
Ground clearance . . . . . . . . . . . . . . . . . . . . . 630 mm Electrical System
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V
Dimensions 8H Battery capacity . . . . . . . . . . . . . . . . . . . . 2 x 170 Ah
Width . . . . . . . . . . . . . . . . . . . . . . . 2780-2940 mm Alternator . . . . . . . . . . . . . . . . . . . . . . . . 2 x 100 A
Length . . . . . . . . . . . . . . . . . . . . . . . . . . 7260 mm
Height . . . . . . . . . . . . . . . . . . . . . . . . . . 3700 mm Cab
®
Ground clearance . . . . . . . . . . . . . . . . . . . . . 630 mm • Vision A/R/C safety cab
• Lexan safety windows
Engine 6H • Seat BeGe 9000 SE pneumatically cushioned
Type . . . . . . . . . . . . . . . . . . . . Perkins 1106C-E60TA • Heating and air conditioning system
Power at 2200 rpm . . . . . . . . . . . . . . . . . . . . 129 kW • Automatic stabilized ±17° Active Roll Control
Torque at 1400 rpm . . . . . . . . . . . . . . . . . . . . 695 Nm
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 l Harvester Crane
Type . . . . . . . . . . . . . . . . . . . . . Loglift L200V/L220V
Engine 8H Reach . . . . . . . . . . . . . . . . . . . . . . . . . . 8,3/10 m
Type . . . . . . . . . . . . . . . . . . . . . . Perkins 1306-E87T Lifting torque. . . . . . . . . . . . . . . . . . . . . 168/188 kNm
Power at 2200 rpm . . . . . . . . . . . . . . . . . . . . 168 kW Crane control . . . . . . . . . . . . . . . . . IQAN 2-lever control
Torque at 1600 rpm . . . . . . . . . . . . . . . . . . . . 908 Nm
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 l Harvester Heads
Harvester heads . . . . . . . . . . . . . Logset 5M, 6M, 7L or 8L
Wheels Measuring system. . . . . . . . Motomit 4+, Motomit IT or Dasa 4
Front . . . . . . . . . . . . . . . . . . . . . . . . 600/700 x 26,5
Rear . . . . . . . . . . . . . . . . . . . . . . . . . 600/700 x 34 Standard Equipment
• Hydraulic frame lock
Transmission • Electric fuel filling pump
• Electronically controlled hydrostatic-mechanical transmission • Electric hydraulic oil filling pump
• Gear box, two gears, off-road and on-road driving • Vacuum pump
• Tractive effort. . . . . . . . . . . . . . 6H:. . . . . . . 135 kN • Air compressor
. . . . . . . . . . . . . . . . . . . . . . 8H:. . . . . . . 166 kN • Auto Roll Control, A/R/C
Speed Ranges
• Radio+CD
Off-road. . . . . . . . . . . . . . . . . . . . . . . . . 0…9 km/h Optional and Extra Equipment
On-road. . . . . . . . . . . . . . . . . . . . . . . . 0… 25 km/h • Sunshields for the cab
Steering
• Engine and cab heater
Off-road steering: steering lever
• Fire supression system
On-road steering: load sensing steering wheel
• Automatic lubrication
• Wheel chains and tracks
Brake System • Crane damper and swing damper for the harvester head
Fully hydraulic, adjustment free, 2-circuit brakes, which also • GPS, data transfer
operate as fully automatic emergency brake.

We reserve the right to make changes without prior notice.

Tel. +358 (0)6-210 3200, Fax +358 (0)6-210 3216

Hännisentie 2, 66530 Koivulahti, Finland
Internet: www.logset.com
The Prosilva base machine is designed for environmentally friendly logging. It is small,
agile, yet dependably stable. This machine can be easily maneuvered in thinnings without
the need for wide driving trails.
Due to its low weight, the machine does not cause any significant soil compaction.
Furthermore, the two-axle design with its unique hydraulic drive system provides for an
unbroken soil surface, even during sharper turns
The high degree of stability has been achieved by lowering the center of gravity. To do
so, heavy parts were placed low to the frame. The frame, robust in itself, holds the fuel
and hydraulic oil tanks. All these features combine to lower the center of gravity and
ultimately the overall height of the unit (which facilitates public road transport).
By the same token, the lower total height means that the cab is closer to ground level.
This innovation reduces the shaking and jolting experienced by operators in difficult
terrain.
Visibility from the cab is excellent in all directions (which includes tree butts/stumps
often hidden by low branches). The windowed roof, in turn, is for tree top viewing.
The cab is of course FOPS and ROPS approved. It has air conditioning, ergonomical seat
and controls, plus many other features for improved operation comfort.
The engine produces an ample 155 hp. This combined with the simple but still state of
the art hydraulic system makes it possible for the machine to operate successfully enen in
clear cutting.
A lot of emphasis has been put toward easy servicing and repair of the whole unit. To
begin with, the design has been kept to its simplest form. Next, all superfluous gadgets
have been either eliminated or combined to function in conjunction with some other
element. All parts have been planned for easy accessibility, even those found under the
cab. Another bonus is that main parts and accessories are available through local
suppliers all around the world.
 Prosilva Specifications

Specifications P705 P810 P915

Main Dimensions
Length cm 530 530 630
Width cm 240 265 285
Height cm 310 310 310
Clearance cm 60 60 60
Weight min. kg 8500 9000 13000
Wheels Nokia 18.4 - 34 600/65 - 34 600/65 - 34
Capacities
Fuel Tank, Left Frame ltr 170 170 400
Oil Tank, Right Frame ltr 200 200 400
Hydraulics
Piston Pump Rexroth Parker Parker
Max Flow ltr 310 360 360
Max Oper. Pressure bar 275 350 350
High Capacity Cooler Yes Yes Yes
Idle Cooling Flow ltr/min 15 15 15
Return Flow Filter 10 Micron Yes Yes Yes
Continuous 3 Micr. Flow ltr/min 15 15 15
Load Sensing Valves Rexroth Parker Parker
Joystick Control Habdles Hakmet Hakmet Hakmet
Fittings and Hoses JIC JIC JIC
Digital System Controller IQAN IQAN IQAN
Full Hydraulic Drive System
Final Drive Planetary Planetary Planetary
Wheel Motor Type Gear Piston Piston
Speed Range 1 km/h 0-5 0-6 0-6
Speed Range 2 km/h N/A 0-12 0-12
Automatic Brakes Each Wheel Each Wheel Each Wheel
Motor
Perkins 1006-6T 155 hp Yes Yes Yes
Automatic Motor Heater No Yes Yes
Electrical 24V
Batteries 2*120 Ah Yes Yes Yes
Alternator 100 A Yes Yes Yes
Lights 16 pcs Yes Yes Yes
Cab
ROPS & FOPS Yes Yes Yes
Air Conditioned Yes Yes Yes
Radio System Yes Yes Yes
Levelling Seat No No Yes
Steering & Axles
Articulated Steering Yes Yes Yes
Radius cm 465 465 520
Front Axle Autolock Yes Yes Yes
Logmer Loader
Size Class 770 990 1209
Reach m 8 8.8 9
Tilting Table +/- 15 deg +/- 15 deg +/- 15 deg
Harvester Keto 51 Keto 100 Keto 150
Optional c/w 1 cm less Reach K51V K100LD4 K150HD4
 min.2870
113"
0×26

min.840
33"
50

,5
39"
max.1000 4-21598
8"
min. 200 MJÖ 000525
inch
88" 64" 49" 49" 105" 72"
mm
2232 1625 max.1240 max.1240 2670 1840

321"
8156

ENGINE ELECTRIC SYSTEM HEAD

4 cylinder, water cooled turbo engine Control system HTC/PVC. The machine is EGS 400:
JOHN DEERE 4045 TF 250 and tandem- equipped with 24 volts starter. Steplessly Pendulum mounted with rotator GV4.
mounted hydralic pumps for working adjustable engine working speed through One fixed and two movable pair of knives
hydraulic and transmission built together potentiometer. where the lower pair is proportionally
to a compact unit. All steering and control System voltage: 12V controlled. Solid feeding wheels with
through electronic controlsystem. Alternator: 2 x 90 A integrated anti skidd device.
Cylinder volume: 4,5 liters (274 in³) Battery: 2 x 89 Ah Automatic chain tention and proportional
Torque at 1400 rpm: 445 Nm (328 lb-ft) Working light: 20 x 55 W chain lubrication (oil depending on the
Output at 2400 rpm: 93 kW (125 hp) tree diameter)
Fueltank: 260 litres (70 US. gal) STEERING Saw diameter: max 450 mm (18 in)
Hydraulically controlled articulated Delimbing diameter: 40-400 mm (2-16 in)
POWER TRANSMISSION steering joint with double steering Max wheel opening: 400 mm (16 in)
Fully hydrostatic with two-steps wheel cylinders. Feeding force: 12,7 kN (2860 lbf)
motor in each wheel and high/low gear Max steering angle: +/- 40° Weight: 420 kg (925 lb)
gives 4 gears. Electronic control system Max steering torque: 23,5 kNm (17300 lbf ft)
for transmission and levelling. Differential PAN 828:
lock steplessly adjustable through hand FRAMES Pendulum mounted with rotator GV3.
potentiometer. The hydraulic system of Fully welded conical center frames with Springy upper knife and two movable
the transmission is fully separated with built-in tanks. Automatic level control delimbing knives and one clambing arm.
tank and filter. through hydraulically controlled casted Specially made feed rollers with aluminium
Tractive force: 66 kN (14800 lbf) wheel arms. The machine has automatic segment. Saw unit with hydraulic motor
Speed [L]: 0-7,5 km/h (0-4.7 mph) stabilizing lock. and chain saw.
Speed [H]: 0-25 km/h (0-15.5 mph) Tilting angle lengthwise: +/- 19° Saw diameter: 430 mm (17 in)
Tilting angle sideways: +/- 31° Delimbing diameter: 20-280 mm (1-11 in)
BRAKES Ground clearance, min-max: Feeding force: 14,4 kN (3240 lbf)
Brakes on all wheels through the 200-1000 mm (8-39 in) Weight: 360 kg (795 lb)
hydrostatic transmission. Parking brake
and emergency brake through spring CAB MEASURING AND CONTROL
assisted wet disc brakes in the wheel Rubber mounted welded safety cab with SYSTEM
motors. damping materials in floor, walls and DSP 4000 (EGS 400)
ceiling. Windows of polycarbonate. Micro computer based measuring and
WHEEL EQUIPMENT Roofmounted heating system combined control system in PC environment with
The machine has in its most narrow with AC together with a floor mounted value and length optimization.
design special tyres for best stability. heater. Air suspended, electrically heated Communication via disc, memory card,
Front/rear: drivers seat. Sound level below 72 dBA. modem or portable PC.The system follows
500/50x26,5 T159 SB (standard) Swedish forest standard (see sep. spec.)
Alt. 600/55 x 26,5; 700/50 x 26,5; LOADER System 90 (PAN 828)
17,5 x 25; 16,9 x 38 Parallel-acting knuckle boom loader with Computerized measuring and control
tiltable loader base and revolving rotator. system with volume calculation.
HYDRAULIC SYSTEM RK 50: Continuous length and diameter
The machine has two separate systems. Tilting angle loader base - 15°/+ 20° measuring.
One for the transmission and one for the Lifting torque: 53 kNm (39100 lbf ft) WEIGHT
working hydraulics. Torque: 12 kNm (8850 lbf ft) Service weight (excl. head): 6050 kg (13340 lb)
Working hydraulics: Out reach: 7 m (23 ft)
Tandem-mounted hydraulic pump. Slewing arch: 230° EQUIPMENTS
Pumping capacity at engine speed 1500 rpm: Hydraulic extension arm: 1,4 m. Standard:
150 l/min (40 US gal/min) Fire extinguisher. Service equipment with
Working pressure: 20 Mpa (2850 psi) technical documentation and necessary
Filtering degree: 10 my abs (10 micron) tools. Tool and storage box. Kleenoil filter.
Tank volume: 90 l (24 US gal) RDS radio.
Extra:
Engine/cab preheater. Tank heating coil.
Sun visors. Anti skid device. Radio with
CD. Sprinkler system. Vaccum pump.
Biodegradeable oil.

We reserve for us the right to make changes in specifications and equipment.

The illustrations do not always show the machine as standard.
www.rottne.com Part No 001-0906GB
Printed in Sweden 00/08

ROTTNE INDUSTRI AB
SE-360 40 ROTTNE
Sweden/Schweden/Suède
Tel +46 470 758700, Fax +46 470 758701
 New, even more effective and more ergonomic

Sampo Rosenlew 1046X Harvester

Technical specifications

Efficiency

Efficient thinning requires a harvester that is easy to steer and capable of moving swiftly
in terrain. Sampo Rosenlew 1046X harvester moves easily even in most demanding
conditions and it can reach every tree that is to be removed. The machine is driven using
only one pedal. The frame-lock and brakes are automatically switched on when working.

Environmental factors

Trees must be harvested efficiently also in

thinnings but damage must be avoided.
Sampo Rosenlew 1046X moves swiftly
without any damage to the ground. Due to
the new harvesting method haulage roads can
be opened far from each others. This means
that damage and loss of growth of the
remaining trees can be minimized.

Hydraulic transmission

The sophisticated hydraulic transmission of the harvester makes it very easy and simple to drive.
The differential gear as well as the transmission can be switched on separately for the front and
rear. The transmission allows longdistance driving on the road, too.
 Economy

When small stems are harvested in thinnings, productivity is

relatively low. The limited production requires that capital and
operating costs are reasonable. Thanks to the efficient
production methods adopted by Sampo Rosenlew we can offer
the harvester to forest contractors at a very reasonable price.
The Sampo Rosenlew 1046X harvester has proved to be
reliable and economical to use. It helps to maintain the
productivity of the forest while it yields a profit to the
contractor.
 Technical Specifications
SR 1046X
Weight Without extra weights 5200 kg
Total weight 7000 kg
Dimensions Length without crane 4.58 m
Width 2.1 m - 2.3 m
Height without crane 2.99 m
Ground clearance 0.60 m
Engine Valmet 420 DSRE
- Power 73.5 kW / 2200 rpm
- Fuel tank 135 l
Transmission Drive pump 123 l/min / 420 bar
Front drive motor on gearbox 45 cc
Rear wheels with hub motors
* Rexroth MCR 1340 cc
** Valmet Black Bear 3150 cc
Three speed ranges forward and backwards Gear 1 0-4 km/h * / 0-3 km/h **
Gear 2 0-5.5 km/h * / 0-4 km/h **
Electrically controlled flow dividing valve Gear 3 0-15 km/h * / 0-11 km/h **
In front axle hydraulically controlled
mechanical differential gear lock
Traction capacity

100 kN
Tyres Front 500 / 60 - 26.5 or
600 / 55 - 26.5
Rear 14.9 - 24 or
500 / 60 - 26.5
Working Pump in working hydraulics 200 l/min / 210 bar
hydraulics Load sensing, programmable
electronic joystick controls
Oil tank 115 l
Electric system Voltage 12 V / 24 V
Battery 180 Ah
Generators 2 x 95 A
Working lights 17
Crane Foresteri H560/H570
Reach 6.1 m / 7.1 m
Lifting moment, gross 52 kNm
Slewing moment 16 kNm
Weight of crane 1140/1180 kg
Harvester head Keto 51
Weight approx. 425 kg
Maximal felling diameter approx. 40 cm
Brakes Hydraulically / mechanically controlled
drum brakes
Cabin Approved safety cabin (FOPS, ROPS, OPS)
Windows made of 12 mm Polycarbonate sheet
Harvesting EPEC 4W50
computer CAN-route with 4 wires
 ®

Tigercat H09
Harvester

A stable high horsepower harvester for demanding thinning applications.

Features and Benefits:

• A very stable, high horsepower thinning harvester;
handles the Logmax 3000 on a 9 m (25½ ft.) crane
with ease

• 134 kW (180 hp) turbo charged and intercooled

6-cylinder Iveco diesel engine

• Double bogie axles with bogie lifts provide a

smooth ride and extremely low ground pressure

• Narrow machine width allows for excellent

maneuverability in tight thinning applications

• The large, comfortable operator’s station is quiet

and climate controlled

• Efficient load sensing hydraulic system with

dedicated pumps for the drive , harvesting
Large, comfortable operator’s station with head and crane functions
excellent visibility
 H09 Harvester
®

Tigercat
SPECIFICATIONS:

Specifications refer to the standard

machine arrangement. Pictures and
illustraitons may show additional
options.
We reserve the right to revise
specifations at any time without
notice.

WIDTH
With 400 wheel: 1.9 m
With 500 wheel: 2.1 m

ENGINE
Iveco NEF 6 Commonrail 6-cyl.
Turbo charged diesel with intercooler
Power: 134 kW DIN (180 hp)
Torque: 700 Nm @1300-1700 rpm

POWER TRANSMISSION HYDRAULIC SYSTEM FIRE SUPRESSION

Hydrostatic transmission with HTC (2) dedicated pumps for the crane and Fixed mounted sprinkler of approved
control equipment and high/low harvester head functions type.
gearbox; 8-wheel drive Load sensing system Hand-held fire extinguisher, 2-piece
Pump: Linde HPV 135 cc
Motors: Rexroth MCR5 680 cc Pump, harvester head: Linde HPR STANDARD EQUIPMENT
2-speed 130/105 cc Electronic engine control;Thermostat
Diff. lock: Electric-hydraulic, front Pump, crane: Linde HPR 105 cc controlled cooling fan; Electric pump
and rear Valve: Voac L 90 LS with filter for replacing hydraulic oil;
Tractive effort: 8,000 kN Hydraulic oil tank: 85 L (22 US Gal) Hydraulic ladder; Air compressor;
Articulated joint stabilizer; Rear light
AXLES OPERATOR’S STATION ramp; Towing ring, front and rear
Front and rear: Chain bogie with Polycarbonate windows.
bogie lift Combined heater/air conditioner OPTIONAL EQUIPMENT
BeGe 9000 SE drivers seat with Mowi EGS 900 L crane, 9,0 m
BRAKES friction arm support and security belt Logmax 3000 harvester head
Type: Multi-disc brakes in Rubber isolated mounted with DASA4 measurement system
drive motors hydraulic tilt for under cab service EME-levers
access
WHEEL EQUIPMENT Blaupunkt stereo radio/tape deck OPTIONAL EQUIPMENT
Front and rear: 400/55 x 22,5 Diesel heater; Hydraulic reservoir
Alt: 500/45 x 22,5 CRANE UNIT heater; Vacuum pump for hydraulic
550/45 x 22,5 Type: Mowi EGS 900 system; Driver seat option; Sit-right;
Lift capacity, gross: 92 kNm GPS-reciver; Nokian GSM-card 6090;
STEERING Swing torque, gross: 22 kNm DASA production software; Spare
Type: Proportional joysticks Rotation angel: 220° wheel; Field repare kit; Liquid filling of
Articulation: ± 46° Reach: 7,5 m (295 in.) wheels; Band and slip protection;
Turning radius,outer : 5 200 mm (17 ft.) Tilt angle: ± 15° Stump spray equipment; Color
Oscillation joint: ± 50° Rotator: See harvester head marking, (2) colors; 2-piece MegaLight
Miscellaneous: Electric-hydraulic Controls: SAKAE minilevers with at the crane side tilt
lockable oscillation PVC-control unit

FUEL TANK HARVESTER HEAD

Volume: 180 l (48 US Gal) Logmax 928

ELECTRICAL SYSTEM MEASUREMENT SYSTEM

Voltage: 24 V DASA 380C, value/distribution
Battery capacity: 2 x 105 Ah adjustment.
Generator: 180 A Price matrices: 8 /type of wood
Working light: 30 lux in the working Length classes: 11 /price matrix
area Diameter classes: 18 /price matrix
Lights: 16 x 70 W Qualities: 6 /type of wood
1 x MegaLight 35 W Price types: 4 /price matrix Box 139, 840 93 Hede, Sweden
Printer. memory card Tel:+46 (0) 684-656 00
Fax:+46(0) 684-656 01
H09-eng-2002

www.tigercat.se
Tel: +1 (519) 442-1000 (Canada)
www.tigercat.com
 Timberjack

Harvester

Technical Data
Dimensions Steering
Length 5880 mm Articulated frame steering
Width 2300 mm (600 tires) Steering angle ±40°
2400 mm (650 tires) Electrical proportional off-road steering
Height 3620 mm
Ground clearance 570 mm Brakes
Service and working brakes are hydraulically
Weight actuated, oil immersed multiple disc brakes.
Depending on equipment, min 10800 kg Spring actuated parking and emergency
brakes
Engine
Type Cummins 4BTA3.9 4-cylinder Axles
turbocharged, aftercooled diesel engine Front and rear: Single rigid axle with electro-
Cylinder volume 3.9 liters hydraulic differential lock
Power output 82 kW / 2200 rpm
Torque 445 Nm /1500 rpm Hydraulic system
Fuel tank 250 l Load-sensing
Flow 216 l/min1800 rpm
Transmission Working pressure 24 MPa
Hydrostatic-mechanical Hydraulic tank 170 l
Two-speed gearbox
Speed 0-25 km/h
Tractive force 100 kN
 Cab • Easy calibration of length and diameter
Spacious, well-lit and comfortable cab with measuring system
an ergonomic seat and low-effort mini-grip • Full tree prediction, price and/or
controls. Efficient heating and air distribution and/or limitations –based
conditioning. Excellent visibility on all sides optimization, unlimited number of sites
and up to the tree tops. Noise level meets • A4 color printer for printing production
ISO standards. Radio/cassette/CD-player. reports, work and repair statistics,
Connection for cellular phone. Light green production instructions, calibration history,
polycarbonate windows. Safety tested stem data, log table, machine parameters
according to ISO standards and BC-standards. • User friendly interface help and trouble
Electrical system shooting
Voltage 24 V • CD-ROM, floppy disc and USB port for
Batteries 2 x 140 Ah Measuring system
Timbermatic 300, PC/Windows® based data transfer
Alternator 140 A • E-mail software installed
Working lights: 30 lux in the working area measuring and control system integrates
harvester head measuring and control system • SilviA program
of the boom • Software for optional electronic caliper
with TMC base machine control system
• Modular based CAN-bus reduces the • Easy to install and update softwares
Tires amount cabling needed, ensuring • TJ 3000 and separate TMC-system
Front: 650x26.5 or 600x30.5 available as option
Rear: 650x26.5 or 600x30.5 accuracy and reliability
• Easy to use, information is displayed on
large color display with clear and user Optional equipment
Boom friendly icons and two-level menus, • Preheater for cabin, engine and hydraulic
Parallel motion knuckle boom TJ 140 H keyboard with integrated mouse oil tank
Reach 7.9 m with the 742 head, 9.2 m with • Highly automated harvester head control • Sun blinds
® Timberjack, TMC and the donkey symbol are registered trademarks of Timberjack Inc. Printed in Finland by Offset Ulonen Oy, EN/5/01

the 732C head software, including e.g. automatic • Vacuum pump for hydraulics
Gross lifting torque 95 kNm controls for sawing, harvester head tilt- • Chains
Gross slewing torque 24 kNm up, pressure adjustments of the delimbing • Spare wheel
Tilt angle ±15° knives and feed rollers, stem feed, color • Electronic calipers
Slewing angle 220° marking and stump treatment • Stump treatment device
• Compact and efficient design of the push
buttons, joysticks and keyboard for Note! Standard and optional equipment may
excellent ergonomics vary. For details contact your local dealer.

Timberjack harvester head

Model 742 732C
Max opening upper knives, mm 465 375
Max opening feed rollers, mm 460 350
Delimbing diameter tip to tip, mm 350 250
Max cutting diameter, mm 470 400
Weight, incl. rotator and link, kg 800 540
Feed force at 24 MPa gross, kN 15.4/18.41) 11.9/15.02)
Feed speed, m/s 0-4.5 0-4.5
Chain speed, m/s 40 40
Pump capacity, l/min (recom.) 160 160
Operating pressure max, MPa 25 25
Saw bar, cm 59 54
Max reach with the TJ 140 H 76/89 boom, m 7.9 9.2

1) with 332/398 cm3 motor The manufacturer reserves the right to make changes or add
improvements without incurring any obligation to make such
2) with 250/315 cm3 motor changes on machines manufactured previously.

Doing more
www.timberjack.com
 Timberjack

Harvester

Technical Data
Dimensions Steering
Length 6600 mm Articulated frame steering
Width 2620 mm (600 tires) Steering angle ± 40°
2780 mm (700 tires) Electrical proportional off-road steering
Height 3620 mm
Ground clearance 575 mm Brakes
Service and working brakes are
Weight hydraulically actuated, oil immersed
Depending on equipment, min 13800 kg multiple disc brakes. Spring actuated
parking and emergency brakes
Engine
Type Cummins 6BTA5.9 6-cylinder Axles
turbocharged, aftercooled diesel engine Front: Bogie axle with electro-hydraulic
Cylinder volume 5.9 liters differential lock
Power output 123 kW / 2000 rpm Rear: Single rigid axle with electro-
Torque 694 Nm /1500 rpm hydraulic differential lock
Fuel tank 300 l
Hydraulic system
Transmission Load-sensing system
Hydrostatic-mechanical Pump displacement 130 cm3/r
Two-speed gearbox Flow 230 l/min1800 rpm
Speed 0-25 km/h Working pressure 24 MPa
Tractive force 130 kN Hydraulic oil system capacity 170 l
 air conditioning. Excellent visibility on distribution and/or limitations –based
all sides and up to the tree tops. Noise optimization, unlimited number of
level meets ISO standards. sites
Radio/cassette/CD-player. Light green • A4 color printer for printing
polycarbonate windows. production reports, work and repair
Safety tested according to ISO standards statistics, production instructions,
and BC-standards. calibration history, stem data, log
table, machine parameters
• User friendly interface help and
Measuring system trouble shooting
Electrical system Timbermatic 300, PC/Windows® based • CD-ROM, floppy disc and USB port
Voltage 24 V measuring and control system integrates for data transfer
Batteries 2 x 140 Ah harvester head measuring and control • E-mail software installed
Alternator 140 A system with TMC base machine control • SilviA program
Working lights: 30 lux in the working system • Software for optional electronic
area of the boom • Modular based CAN-bus reduces the caliper
amount cabling needed, ensuring • Easy to install and update softwares
Tires accuracy and reliability • TJ 3000 and separate TMC-system
Front: 600x22.5 or 700x22.5 • Easy to use, information is displayed on available as option
Rear: 650x26.5 or 600x30.5 large color display with clear and user
friendly icons and two-level menus, Optional equipment
Boom keyboard with integrated mouse • Preheater for cabin, engine and
Parallel motion knuckle boom • Highly automated harvester head control hydraulic oil tank
TJ 180 H 83/97 software, including e.g. automatic • Sun blinds
• Vacuum pump for hydraulics
Timberjack, TMC and the donkey symbol are registered trademarks of Timberjack Inc. Printed in Finland by Offset Ulonen Oy, EN/5/01

Reach with head 8.6 or 10 m controls for sawing, harvester head tilt-
Gross lifting torque 135 kNm • Chains, tracks
up, pressure adjustments of the delimbing
Gross slewing torque 38 kNm • Spare wheel
knives and feed rollers, stem feed, color
Tilt angle ±15° marking and stump treatment Note! Standard and optional equipment
Slewing angle 220 ° • Compact and efficient design of the push may vary. For details contact your local
buttons, joysticks and keyboard for dealer.
Cab excellent ergonomics
Spacious, well-lit and comfortable cab • Easy calibration of length and diameter The 742 and 745 heads available with
with an ergonomic seat and low-effort measuring system both 600 and 700 front tire options,
mini-grip controls. Efficient heating and • Full tree prediction, price and/or the 752 head only available with 700
series front tires.
Timberjack harvester head
Model 742 745 752
Max opening upper knives, mm 465 560 490
Max opening feed rollers, mm 460 560 500
Delimbing diameter tip to tip, mm 350 400 410
Max cutting diameter, mm 470 550 550
Weight, incl. rotator and link, kg 800 850 930
Feed force at 24 MPa gross, kN 15.4/18.41) 16.0/20.02) 18.2/20.0/21.83)
Feed speed, m/s 0-5 0-5 0-5
Chain speed, m/s 40 41 40
Operating pressure max, MPa 24 24 24
Saw bar, cm 64 64 75
Max reach with the TJ 180 H 97 boom, m 10 10 10
Max reach with the TJ 180 H 83 boom, m 8.6 8.6 8.6
1) with 332/398 cm3 motor 2) with 400/500 cm3 motor The manufacturer reserves the right to make changes or add
improvements without incurring any obligation to make such
3) with 468/514/560 cm3 motor changes on machines manufactured previously.

Doing more
www.timberjack.com
 Timberjack

1270D Harvester

Technical Data
Dimensions Steering
Length 7400 mm Articulated frame steering
Width (600 tires) 2740 mm Steering angle ±42°
(700 tires) 2860 mm Electrical proportional off-road steering
Height 3700 mm
(3870 mm with leveling cabin) Brakes
Transportation height 3700 mm Service and working brakes are
(3740 mm with leveling cabin, tilted)
Ground clearance 625 mm hydraulically actuated, oil immersed
Note! Measurements are nominal and may multiple disc brakes. Spring actuated
vary due to tire manufacturing tolerances. parking and emergency brakes

Weight Axles
Depending on equipment, min 17500 kg Front: Bogie axle with electro-hydraulic
differential lock
Engine Rear: Single rigid axle with electro-
John Deere JD6081 HTJ 03 diesel engine hydraulic differential lock
Cylinder volume 8.1 liters
Power output 160 kW / 1400…2000 rpm Hydraulic system
Torque 1100 Nm / 1400 rpm Load-sensing system
Fuel tank 480 liters Pump displacement 190 cm3/r
Viscous fan drive Flow 304 l/1600 rpm
Working pressure 24/28 MPa
Transmission Control system Timbermatic 300
Hydrostatic-mechanical Hydraulic oil system capacity ~300 l
Two-speed gearbox
Speed 0-24 km/h
Tractive force 160 Nm
 Radio/cassette player. Light green • Full tree prediction, price and/or
polycarbonate windows. Safety tested according distribution and/or limitations –based
to ISO standards. optimization, unlimited number of sites
• A4 color printer for printing maps,
production reports, work and repair
Timberjack cab-leveling option statistics, production instructions,
The tilting cab is mounted on a leveling platform calibration history, stem data, log table,
on the front frame that provides for three machine parameters
degrees of freedom. Tilting sideways 15°, • User friendly interface, help and trouble
forward and backward 11°. Turning +/- 50°. shooting
Tilting functions are independent, and can be • CD-ROM, floppy disc and USB port
Electrical system controlled individually or in combination. for data transfer
Voltage 24 V The leveling and turning can be actuated • E-mail software installed
Batteries 2 x 140 Ah automatically or manually. • SilviA program
Alternator 140 A
• Software for optional electronic caliper
Working lights: 14 Twin power and 4 single • Easy to install and update softwares
lamps on the boom Measuring system
30 lux in the working area of the boom Timbermatic 300, PC/Windows® based
measuring and control system integrates Optional equipment
harvester head measuring and control system • Leveling and turning cabin
Tires with TMC base machine control system • CD-changer
Front: 600x26,5 or 700x26,5 • Xenon working lights
• Modular based CAN-bus reduces the
Rear: 600x34 or 700x34 • Thinning lights
amount cabling needed, ensuring
accuracy and reliability • Sun blinds
Boom • Easy to use, information is displayed on • Preheater for cabin, engine and
Parallel motion knuckle boom TJ 210 H 90, large color display with clear and user hydraulic oil tank
• Refill pump for fuel
© Timberjack, TMC and the donkey symbol are registered trademarks of Timberjack Inc. Printed in Finland by Offset Ulonen Oy. EN/4/02.

97 or 115 friendly icons and two-level menus,

Reach with head 9.3 m, 10 m or 11.8 m • Refill pump for hydraulic oil
keyboard with integrated mouse
Gross lifting torque 178 kNm • Vacuum pump for hydraulics
• Highly automated harvester head control
Gross slewing torque 43.6 kNm • Hydraulic oil off-line fine filter
software, including e.g. automatic • Chains, tracks
Tilt angle -13° + 25° controls for sawing, harvester head tilt-
Slewing angle 220° • Spare wheel
up, pressure adjustments of the delimbing • Electronic calipers
knives and feed rollers, stem feed, color • Colour marking system
Cab marking and stump treatment • Stump treatment device
Spacious, well-lit and comfortable cab with • Compact and efficient design of the push • Automatic boom leveling
an ergonomic seat and low-effort mini-grip buttons, joysticks and keyboard for • Flashcut saw control system
controls. Efficient heating and air conditioning. excellent ergonomics
Excellent visibility on all sides and up to the • Easy calibration of length and diameter Note! Standard and optional equipment may
tree tops. Noise level meets ISO standards. measuring system vary. For details contact your local dealer.

Timberjack harvester head

Model H752HD 762C H762 745 H754 758
Max opening upper knives, mm 520 550 770 560 560 680
Max opening feed rollers, mm 500 606 620 560 560 700
Delimbing diameter tip to tip, mm 400 430 480 400 400 480
Max cutting diameter, mm 570 650 650 550 550 / 620 650
Weight, incl. rotator and link, kg 960-1020 1270-1350 1215-1275 820-850 880-930 1080-1150
Feed force at 24 MPa gross, kN*) 18.2-24.4 23.4-28.0 25.1-33.8 16.0-25.2 16.0-25.2 22.0-27.0
Feed rollers, pcs 2 2 2 4 4 4
Feed speed, m/s 0-4.9 0-4.5 0-5 0-5 0-5 0-4.7
Chain speed, m/s 40 40 40 40 40 40
Operating pressure max, MPa 24 / 28 24 / 28 24 / 28 24 24 / 28 24 / 28
Saw bar, cm 75 75/80 82.5 64 64 / 75 75
Max reach with the TJ 210 H boom, m 10 9.3 10 11.8 11.8 10
The manufacturer reserves the right to make changes or add
improvements without incurring any obligation to make such
*) Depends on feed motor size changes on machines manufactured previously.

Doing more
www.timberjack.com
Kubota Multifonctions harverster 6' 6 " wide,
with telescopic boom

Specifications
WIDTH : 78" (1990 mm)
GROUND CLEARANCE: 13" (315 mm)
TOTAL WEIGHT 15,000 lbs (5,680 k)
or more depending of the
option:
ENGINE : Kubota diesel, 4 cylinders
liquid cooling
47.9 HP à 2,500 RPM
HYDRAULIC SYSTEM 16,9 gal. (63.88 L) variable X
2 8.9 gal.(33.64 L) gear X 1
HARVESTING HEAD PATU-400 SH (stroke)
PATU-355 RH (roller)
PATU-405 RH (roller) Standard
Logmax-928 (roller)
ROTOR GV6F Equipments
Work lights (4).
MESURING SYSTEM Metal protection under carrier.
Tool box.
EXTENSIBLE BOOM Depending of the harvesting Anti-skid foot steps.
head 21' 4 " (6.5m) 5' 3''(1.60) Air Turbo II pre-filter.
Exterior muffler.
Special for easy reading of the hydraulic
OPTIONAL MODIFICATIONS FOR HARVESTER WITH pressure.
ROLLER OR STROKEHEAD Two (2) alternators total up 90 AMPS.
Electric circuit cutter.
Cab protection (with removable portion for air Coolant filter.
conditioning unit. Motor temperature gage with loud alarm and
Rock guard. automatic engine stop system.
Studs. Hydraulic temperature gage and low oil level
Modification of the track for snow. indicator.
Raise and wider (20" from the ground and 83" exterior). Radio AM-FM.
Air conditioning. Cab ventilation.
Glases. Cab lights.
Lexan. (front and door). Warranty: Carrier ;1 yr or 1000 hrs.
Printer for computer. Head;6 months or 1000 hrs.
Electronic tree counting unit. Books: operator, maintenance, parts.
Extra fuel tank for greater autonomy. Training for mecanic maintenance.
Lock caps for fuel tank and hydraulic tank.
Extinguishers.
Work lights extra (3).
Sun shad for front window.
Training courses. (operation).
Starting kit. (parts and tools).

The specifications and design are subject to changes without advise.

Neuson Baumaschinen GmbH. / Products / Harvesters

Neuson harvester - you cant ask for better.

There are many reasons for your Neuson harvester
1.
NEUSON POWER
The generously dimensioned 4 cylinder
turbo-Diesel-engine provides for a high
torque at moderate rpm and at the same
time low noise level. The D e u t z e n g i n e
is watercooled and provides at 2300 rpm
75 kW (102 HP). This performance is
achieved with a piston displacement of
3192 ccm.

2.
THE HIGH-POWER HYDRAULICS
The neuson sensitive-hydraulic system and
the reliable self-balancing power
3. regulation allow an e n e r g y - s a v i n g as
well as e c o n o m i z e d a p p l i c a t i o n of
HARVESTER HEADS the machine. This guarantees high power
The special designed hydraulics as well as and reliability and in the same time, h i g h
the amply dimensioned turbo-Diesel- productivity.
output allow the installation of different
harvesting heads. The h e a d s GM 928
ESB and Logmax 3000 are specialized
thinning harvesters. The GM 928 ESB has
a cutting diameter of 16.1" (410 mm). The
Logmax 3000 harvester head has a cutting
diameter of 19.28" (490 mm) and therefore
is mainly suitable for second thinnings or
final harvest applications.

The required hydraulic output is produced

by a d o u b l e v a r i a b l e
d i s p l a c e m e n t p u m p and a d o u b l e
4. g e a r p u m p, producing a flow volume of
160 l/min, 53 l/min, respectively 19 l/min.
EVERYTHING EASILY
The combination of the turbo-Diesel-
ACCESSIBLE
engine with the hydraulic system provide
Ease of maintenance is what we practice:
sensitive, precise and smooth control of
Excellent accessibility and handling while
the harvester and machine movements.
servicing reduces maintenance work to a
Low operating force and ergonomic design
minimum.
of the joysticks allow f a t i q u e - p r o o f
operation even over a longer
period.

5.
STABILTY AND MANEUVRABILTY
(TILT 11002 HV)
The neuson developed - u p p e r c a r r i a g e
t i l t s y s t e m gives you extreme stability
on steep ground:
uppercarriage with 25° tilt in one direction,
lateral each 15°: this guarantees stability
6. and flexibility in every situation. The
gradability has been increased to over
SAFE AND ERGONOMICAL 30%.
The harvester cabin specially designed for
logging, meets the requirements for
R O P S , F O P S a n d O P S . Ergonomics
is a major issue:
low noise level, sufficient comfort for the
driver with fully equipped spring-
suspension seat. powerful halogen
operating head-lamps assure best
allround-view. These features are
essential for optimum working conditions.
If required an air conditioning unit can also
be installed (optional).
 7.
YOUR HARVESTER
you cant ask for better
The design of our harvester machines is
based upon c r a w l e r e x c a v a t o r s we
have been mass-producing for years
(thousands per year accomplished). You
can easily retool your harvester into an
excavator: that means two-machines-in-
one! A cost-benefit you can spread over
the entire year.

8.
BEST SIGHT EVEN AT NIGHT
The operating h e a d l a m p s mounted at
the roof and at the undercarriage provide
an optimum allround-view even for 24-
9.
SOLID UNDERCARRIAGE
hour-around-the-clock operation. (rubber- or steel tracks)
The generously dimensioned
undercarriage steel tracks allow easy
operation on s t e e p s l o p e s. Ground
disturbances in spring or environmental
impact is also reduced by using rubber
tracks in humid areas.

10.
LONG REACH
As an option a s i n g l e t e l e s c o p i c
e x t e s i o n is available especially
designed for steep slope operation. No
11.
matter how steep the slope, the telescope REFUELLING-DIESEL-PUMP
allows operating of the harvester head The standard built-in Diesel pump eases
without getting ground contact. the filling of the fuel into the generously
dimensioned 170 L fuel tank.

A ll s pe ci fi ca ti on s, m a te ri al s a nd e qu ip m en t
are s ub je ct to c ha ng e w i th out a dv an ce d no tic e.

Harvesters

For technic al contact please notify our webmaster@neuson.com

Copyright © 2000 NEUSON AG.
Neuson Baumaschinen GmbH. / Products / Harvesters / Technical data

Technical Data - Harvester.

Harvester
Type 8 0 0 2 R D V -H V 9002 HV 110 02 H V
Weight with cabin 830 0 kg 110 00 k g 125 00 k g
Engine Y A N M A R 4 T N E 9 8 -N S R , DEU TZ BF 4M 1 012 E C DEU TZ BF 4M 1 012 E C , 4 -
4 -cyl . Di es el e ngi ne 4-cyl . tu rb o -Die se l en gi ne cyl . tu rb o -Die se l en gi ne
Total displacement 3318 ccm/2200 rpm 3192 ccm/2300 rpm 3192 ccm/2300 rpm
Power output 43, 8 kW (5 7, 9 HP ) 75 kW ( 102 H P ) 75 kW ( 102 H P )
Fuel tank capacity 90 li te r 170 l it er 170 l it er
Pump var ia bl e do ub le var ia bl e do ub le var ia bl e do ub le
dis pl ac em en t + ge ar dis pl ac em en t + do ub le dis pl ac em en t + do ub le
pum p gear pump gear pump
Discharge capacity 8 0 , 5 + 8 0, 5 + 4 8, 9 l / m in 8 8 + 8 8 + 5 4 + 1 9 l /m in 88+88+54+19 l/min
Working and driving 300 b ar 300 b ar 300 b ar
hydraulic pressure
Swinging system 250 b ar 250 b ar 250 b ar
pressure
Harvester hydraulic 250 b ar 250 b ar 250 b ar
pressure
Hydraulic oil tank 122 l it er 122 l it er 122 l it er
capacity
Harvester G M P A N 9 28 E S B /3 95 LO G M A X 3 00 0/ 52 5 kg LO G M A X 3 00 0/ 52 5 kg
model/Weight kg
Max. cutting diameter 410 m m 490 m m 490 m m
Max. delimbing 280 m m 380 m m 300 m m
diameter
Max. opening between 340 m m 390 m m 390 m m
rollers
Tilting system 25 °/ eac h 15 °
forward/s

All s pe ci fi ca ti on s, ma te ri al s a nd e qu ip m en t ar e su bj ect t o ch an ge wi th ou t ad va nc ed no ti ce .

Technical data

For technic al contact please notify our webmaster@neuson.com

Copyright © 2000 NEUSON AG.
 Tigercat H845B
Harvester

Features and Advantages

The H845B harvester combines durable
Tigercat construction with state of the art
cut-to-length technology.

• 230 HP Cummins 6CTA8.3 turbocharged aftercooled engine. • Lighting package for night operation.
Retractable roof enclosure for excellent access to heat • D6 size track and bottom rollers.
exchangers and front half of the engine.
- Choice of widths and single, double or triple grouser shoes
• Convenient valve access.
- Mud/snow relief holes
• Oversized heat exchangers with swing out oil cooler for
easy access. • High capacity boom system with guarded plumbing and optional
live heel.
• Quiet, comfortable operator's station:
• Heavy duty dual cushioned hydraulic cylinders.
- Fully insulated, pressurized and climate controlled for quiet,
comfortable operation • Load sensing, flow-on-demand hydraulic system for drive, swing
and boom functions.
- Super duty, fully adjustable lumbar support suspension seat
• Full simultaneous control of all hydraulic systems.
- Forestry cab, no external guarding required
• Dedicated pumps for harvester and harvester rotate functions.
• Heavy duty swing bearing and planetary gearbox, 360˚
continuous rotation. • Factory installed Tigercat 650 Woodking for optimal performance.

Forest duty undercarriage designed and built by Tigercat. Large hinged doors and power roof panel provides excellent Oversized swing-out oil cooler for improved access and
31” (790 mm) ground clearance for rough terrain conditions. service access. easy cleaning.
Tigercat
®

H845B Harvester
SPECIFICATIONS:
DIMENSIONS (With single grouser shoes) ROTATING UPPER
WIDTH Over 24” (610 mm) tracks . . . . . . . . . . . . . . . . . . . . . . . . . .120” (3,050 mm) SWING DRIVE . . . .360° continuous rotation
TAIL SWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (See chart below) Swing bearing, 47” (1,190 mm) ball circle diameter
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .approx. 52,000 lbs (23,600 kg) Double reduction swing drive planetary gearbox
(With boom, less attachment) ENCLOSURE . . . . . .Power operated retractable enclosure
(For other dimensions, see below) Perforated plate access doors with
vandal protection
POWER HARVESTER BOOM SYSTEM
ENGINE . . . . . . . . . . . . . . . .Cummins 6CTA8.3, 230 hp @ 2200 RPM MAXIMUM CUT RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30' (9,150 mm)
COOLING . . . . . . . . . . . . . .Steel finned radiator and steel swing out oil cooler MINIMUM CUT RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11' (3,350 mm)
Suction engine fan; Removable debris screen ROTATOR PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Standard Indexator
FUEL TANK CAPACITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 gal. US (795 L) LIVE HEEL BOOM
Bare pin lift capacity at full reach . . . . . . . . . . . . . . . . . . . . .5000 lbs (2,270 kg)
HYDRAULIC SYSTEM ONE-PIECE STICK
TRACK/SWING/BOOM PUMP ................. Load sensing, var. displ. piston Bare pin lift capacity at full reach . . . . . . . . . . . . . . . . . . . .5,800 lbs (2, 630 kg)
HARVESTER PUMP ........................................Dedicated var. displ. piston
ROTATE PUMP ................................................Dedicated fixed displ. vane OPERATOR’S STATION
FILTRATION.........................................................................Full flow return CAB . . . . . . . . . . . . . . . . . . . .Fully enclosed, insulated and isolation mounted
BOOM CYLINDER...........................................................5” bore (130 mm) Removable skylight & rear window
STICK CYLINDER ........................................................4.3” bore (110 mm) A/C, heater and defroster; side mounted controls
HORSE POWER CONTROL.......................Electronic speed sensing type High visibility instrumentation
Machine monitoring system with warning alarms
TRACKS Polycarbonate windows, front, right, rear, door
UNDERCARRIAGE . . . . .Track side frames include integral track AM/FM digital stereo cassette
guides and ramp angles at each end SEAT . . . . . . . . . . . . . . . . . .Extreme duty suspension, fully adjustable
Removable roller access cover Armrest mounted joysticks
DRIVE ............................Var. motors with integral brake valves Retractable lap belt/shoulder restraint harness
Infinitely variable speed with low lockout CONTROLS . . . . . . . . . .Hyd. proportional for boom, travel, swing, rotate
TRACTIVE EFFORT......48,000 lbs (21,600 kg) Electric switch for swing brake and
GEARBOX ....................Triple reduction planetary type with brake travel speed range
FRONT IDLER ..............Hydraulic track adjuster OTHER STANDARD EQUIPMENT
Spring shock absorber PRECLEANER and 2-stage engine air cleaner
TRACK SLIDES, ............UPPER Replaceable, welded; Optional rollers FUEL SUCTION STRAINER
TRACK ROLLERS, ........LOWER (8) D6 size tractor type rollers COUNTER WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,800 lb (1,270 kg)
TRACK SHOE................24” (610 mm) width, single grouser ELECTRICAL
Optional ..................Widths up to 36” (915 mm) BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(2) 12 volt
ALTERNATOR (Standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Amp
BRAKES
TRACK & SWING . . . . . . .Friction disc type HARVESTING HEAD
Spring applied, hydraulic release Tigercat 650 Woodking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Factory Installed
Track . . . . . . . . . . . .Automatically applied OPTIONAL EQUIPMENT
Swing . . . . . . . . . . .Manually applied from cab Dry chemical fire suppression system;
Cold weather kit; Large Undercarriage;
Leveling Undercarriage
Flexxaire TM fan system
12 - 24 volt converter for accessories
WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE

TAIL SWING:
Track Width
24" shoes 35" (890 mm)
36" shoes 29" (735 mm)

140" (3,530 mm)

132" (3,350 mm)

GROUND CLEARANCE
31" (790 mm) TO TIP OF
SINGLE GROUSER SHOE

29" (735 mm) TO TIP OF

TRIPLE GROUSER SHOE

173" (4,400 mm)

360" (9,150 mm)

Tigercat
®

40 Consolidated Dr.
P.O. Box 544
Paris, Ontario, Canada
N3L 3T6
Tel: (519) 442-1000
(6024) 3 1000/10m•adv
E-mail: comments@tigercat.com Internet: www.tigercat.com Fax: (519) 442-1855
 Timberjack

608B/608B-HD Standard and Heavy Duty Undercarriage

Harvester Specifications

The Timberjack 608B and 608B-HD levels. A high back fully adjustable seat
Harvesters represent the refinement and with armrest mounted mini-lever
evolution of the field-proven 608 joysticks makes the 608B Harvester a
Harvester design. comfortable place to work. A sliding
These harvesters offer increased rear window with an insect screen, large
ground clearance, tractive effort and storage areas and coat hook are just a
service access, as well as superior few of the features designed to enhance
operator comfort for increased operator comfort.
productivity. All routine maintenance can be done
Unlike excavator conversions, the from ground level and the service access
608B Harvester is purpose- built with a doors have been made 21% larger.
new optimized boom set. With a reach Debris cleanouts have been added to the
of 32' 6" (9.9 m) and minimal tail turntable and boom mount, while
swing, the 608B Harvester is ideal for changes have been made to minimize
selective cuts and commercial thinning the entry of debris.
operations. The highwalker under- Timberjack 608B and 608B-HD
carriage provides up to 30" (76 cm) of Harvesters: the evolution continues.
ground clearance for great mobility.
With superior operator comfort in
mind, Timberjack has updated the cab
interior and reduced interior sound
608B/608B-HD
Timberjack Harvesters
All Specifications refer to both the Timberjack 608B and Timberjack 608B-HD Harvesters unless otherwise stated.

Telescopic Boom Performance

Optimized boom set geometry for harvester applications. The lift capacity at 32' 6" (9,9 m) including the weight of the
harvesting head is 1,368 lbs. (620 kg) allowing for effective harvesting using the entire operational cutting swath.
Maximum Cut Radius Minimum Cut Radius Cutting Swath

608B/608B-HD with standard

Timberjack 762C Harvesting Head, 32' 6" 8' 8" 23'10"
weighing 2,930 lbs. (1 330kg) (9.9 m) (2.6 m) (7.3 m)
Hoist Cylinder: 6.0" (152 mm) bore, 3.5" (89 mm) rod, 44.5" (1 130 mm) stroke
Tilt and Stick Cylinder: (cushion type) 5.0" (127 mm) bore, 3.0" (76 mm) rod, 40.5" (1 029 mm) stroke
Telescopic Boom Extension Cylinder: (cushion type) 3.25" (83 mm) bore, 2.0" (50.8 mm) rod, 96.5" (2 451 mm) stroke

Power Upper Machine Revolving Structure

Engine Cummins 6BTA5.9 turbo, 6 cylinder Unitized weldment using high strength steels.
Horsepower 167 hp (1 25 kW) @ 2000 rpm
Displacement 359 cu. in. (5.9 L) Enclosure:
Fuel tank capacity 150 gal. U.S. (570 L) Plate exterior over tubing frame. Perforated steel plate on the
access door maximizes air flow for cooling. Engine
Hydraulic System compartment is isolated from the rest of the machine for better
Hydraulic system designed for the Timberjack 762C cooling and noise reduction. Enclosure is designed to
Harvesting Head. Capacity 52 gal. U.S. (197 L). The reservoir minimize the ingress of unwanted materials. Sloped roof
is completely sealed and pressurized and comes complete with minimizes debris accumulation.
a hand pump filler. The return oil is 100% filtered through Swing Drive:
two 5 micron filters with a 22 psi (152 kPa) bypass. 360º continuous rotation using piston swing motor and double
reduction planetary gearbox. Swing brake is incor-porated in
the gearbox and is spring applied and electrically operated
from cab with hydraulic pilot pressure. Swing speed up to
6.1 rpm.
 608B/608B-HD Timberjack Harvesters

B.

32'6" 8'8"
(9.9m) (2.6m)
Max. Cut Min.Cut

A.

Boom Swing Arc

23'10" 360° Continuous
(97.3 m)
Swath

Vehicle Dimensions
608B 608B-HD
*Weight 42,559 lbs. (19 305 kg) 47,986 lbs. (21 766 kg)
Height to top of cab 128" (325 cm) 130" (330 cm)
A.Width over 24" tracks 115" (292 cm) 124" (315 cm)
B.Length, less booms 160" (406 cm) 174" (442 cm)
Tail swing over tracks (side) 15" (38 cm) 10" (25 cm)
(*Approximate operating weight includes Timberjack 762C Harvesting Head at 2,930 lbs. (1 330 kg), all standard equipment,
1/2 full fuel tank at 525 lbs. (238 kg), all fluids and a 165 lb. (75 kg) operator.)

Track System
Tractive Effort:
Undercarriage Weldment: Lower Track Rollers:
608B - 43,193 lbf (192 kN)
Fully enclosed unitized weldment using (8) D5 size tractor rollers per track side
608B-HD - 45,855 lbf (204 kN)
high strength, wear resistant steels. frame. (8) D6 size tractor rollers per
Track side frames are designed with track side frame on the 608B-HD.
integral track guarding and have ramp Traction Brakes:
angles at both ends. Service access Friction discs are incorporated in the
covers are provided for roller removal. track drive gearbox.
Travel Speeds: Ground Clearance
Front Idler:
Sealed, heavy duty, bronze alloy High (infinitely variable to) 3 mph
bearings in oil bath. Spring shock (4.8 kph) Low 1.5 mph (2.4 kph)
absorber and hydraulic track Track Shoes, Ground Pressure And *Ground Clearance
tension adjuster.
Track Drives: Track Shoes 608B 608B-HD
Ground Pressure Ground Clearance Ground Pressure Ground Clearance
Triple reduction planetary type track Standard: 24" (61 cm) 6.4 psi 28" 6.7 psi 27"
drive gearboxes with bi-directional Double Grouser (44 kPa) (72 cm) (47 kPa) (70 cm)
variable displacement piston motors. Optional: 24" (61 cm) 6.4 psi 30" 6.7 psi 29"
Drive motors include counterbalance Single Grouser (44 kPa) (76 cm) (46 kPa) (74 cm)
valves to protect motors in over- Optional: 28" (71 cm) N/A N/A 5.9 psi 29"
Single Grouser (41 kPa) (74 cm)
running conditions.
Optional: 30" (76 cm) 5.3 psi 28" 5.5 psi 27"
Upper Track Slides: Double Grouser (37 kPa) (72 cm) (38 kPa) (70 cm)
Wear resistant, replaceable slides Optional: 36" (91 cm) 4.5 psi 28" 4.7 psi 27"
are standard. Triple Grouser (31 kPa) (71 cm) (32 kPa) (69 cm)
*Mearsured from tip of grouser bar on track to underside of carbody.
 608B/608B-HD Timberjack Harvesters

Operator’s Cab Electrical System Standard Equipment

Spacious and strong, with integral Alternator 24 volt, 70 amp • 10 lb. Fire extinguisher, Operator
protective structure. Green tinted Batteries (2) 950 CCA, and Parts manuals.
Lexan Margard windows reduce need 185 minutes RC, • 24" (61 cm) and 30" (76 cm) track
for cage type guarding. Integral “sky- each shoes are provided with mud/snow
light” provides excellent upward 5 twin power quartz halogen relief holes.
visibility. Large opening rear window working lights. • Automatic saw chain tensioning on
doubles as a second exit route. 2 lights in engine enclosure. 762C Harvesting Head.
Reverse slope windshield reduces
glare and debris accumulation.
Harvesting Head Optional Equipment
Deluxe fully adjustable cloth sus- Timberjack 762C • Fire suppression system.
pension seat with retractable seat belt Maximum felling • Hydraulic tank heater.
and armrest mounted mini-joysticks. diameter 25.6 inches (65 cm) • Top rollers in lieu of bolt-on track
Low effort mini-joysticks control all Maximum delimbing slides, two per side (mandatory with
swing, boom and harvester head diameter 16.9 inches (43 cm) 36" shoes).
functions. Complete with storage Feeding mechanism: • 24 volt to 12 volt converter.
areas behind the seat and on the door, Standard 2 rubber wheels • 2,000 lb. (907 kg) counterweight.
dome light, coat hook and ash tray. with chains
Timberjack-installed cab complies Optional 2 spiked steel rollers
Timberjack Warranty
with: SAE J1040 ROPS, SAE J231 All 608B/608B-HD Harvesters,
Delimbing knives
FOPS and J1084 OPS. including the Timberjack 762C
2 fixed, 4 moving
Harvesting Head, come with a one
®Timberjack and the donkey symbol are trade marks of Timberjack. Printed in Finland by Offset Ulonen Ky 12/98

Climate Control knives

year or 2,000 hour warranty* and are
Feed speed 14.8 feet/sec.
Unitized high output heater and air completely engineered and assembled
(maximum) (4.5 meters/sec.)
conditioner with air filter on the inlet. by Timberjack.
Sliding rear window with an insect
*Weight 2,930 lbs. (1 330 kg)
screen for enhanced air exchange. * Consult warranty documentation for details.
Full insulation to stabilize cab temp- * Approximate weight including
erature and further reduce interior rotator and hydraulic hoses. The manufacturer reserves the right to make
cab noise level. Measuring and Control changes or add improvements at any time
without incurring any obligation to make such
Instrumentation System changes on machines manufactured previously.

Gauges: The Timberjack 3000 measuring and

Engine coolant temperature, Engine control system controls all functions
oil pressure, Hydraulic oil temp- of the 762C Harvesting Head and
erature, Voltage, Fuel level, provides measurement of log lengths
Hourmeter, Tachometer. and diameters plus volume
Warning lights for: calculations for 4 species. An
Low hydraulic oil level, High return extensive range of log lengths can be
filter pressure, Low pump inlet pres- pre-set by the operator. A high
sure, and Low engine coolant level. degree of flexibility is built-in with
Horn system sounds warning for: automated sawing and processing
Loss of engine oil pressure, High functions. Full production records are
engine coolant temperature, High available on either the large visual
hydraulic oil temperature. display or the on-board printer.

Timberjack Group • A Member of Rauma Corporation

Timberjack AB, P.O. Box 502, S-195 25 Märsta, Sweden.
Tel. +46 8 591 252 00, Fax +46 8 591 112 61.
www.timberjack.com
 Timberjack

608L/HTH620 Harvester

Technical Data
Engine Service Enclosure
Cummins 6CTA8.3 turbo, 6 cylinder Hydraulically opened and doubles as
Horsepower 171kW (230hp)@2000rpm a sturdy work area. Battery powered
Displacement 8.3L (505 cu.in.) enclosure pump with back-up hand
Fuel Tank Capacity 570L (150 U.S. gal.) pump. Plate steel over formed steel
frame. Designed to minimize the
Hydraulic System entrance of unwanted materials and
Designed for the HTH620 harvesting debris accumulation.
head. Speed Sense hydraulic pump
control for maximum machine Swing Drive
performance. Reservoir capacity 197L 360° continuous rotation using piston
(52 U.S.gal.) completely sealed, swing motor and double reduction
pressurized, complete with a hand planetary gearbox, no swing stops.
pump filler. Return oil 100% filtered Swing brake is incorporated in
through two 5 micron filters with a gearbox and is spring applied and
152 kPA (22psi) bypass. hydraulically released by switch in the
cab.
Upper Machinery Revolving Swing speed up to 6.1 rpm.
Structure
Unitized weldment using high
strength steels and strengthening
members. Minimal tail swing design.
 608L/HTH620 Harvester

Boom Performance
A Minimum cut radius 2 770 mm (9'1") Hoist cylinder: 152 mm (6.0") bore, 89 mm (3.5") rod,
B Maximum cut radius 8 050 mm (26'5") 1 130 mm (44.5") stroke
Cutting swath 5 280 mm (17'4")
Stick Cylinder: (cushion type) 127 mm (5.0") bore, 76 mm
The 608L has an optimized boom set designed for the (3.0") rod, 1 130 mm (44.5") stroke
HTH620 harvester head. It features a long reach and
a large working envelope for maximum harvesting and
processing efficiency.
 608L/HTH620 Harvester

ShiftTilt Levelling System

Unique leveling system actually shifts the upper structure 910 mm (36'') ahead over the track frames while tilting to 27º
(51% slope) forward. Includes heavy walled leveling cylinders with high capacity lock valves.

Cab Leveling Capability Cab Leveling Cylinders

Forward: 27º (51% Slope) Bore: 178 mm (7")
Rear: 10º (18% Slope) Stroke: 794 mm (31.25")
To each side: 20º (36% Slope) Rod diameter: 102 mm (4")
Wall Thickness: 13 mm (0.5")
Leveling Controls
Fore-to-Aft leveling: variable speed control
Side-to-side leveling: variable speed control

Track System
Fully enclosed, unitized undercarriage weldment using high Front Idler - sealed, heavy duty, bronze alloy bearings in oil
strength, wear resistant steels. Track side frames have bath. Spring shock absorber and hydraulic track tension
integral track guarding for strength. Ramp approach angles adjuster.
at both ends for superior travel over rough terrain and
reduced ground impact.
Service access covers are provided for roller removal.
 608L/HTH620 Harvester

Vehicle Dimensions
A Width over 610 mm (24") tracks 3 050 mm (10') Weight 26 580 kg (58,590 lbs.)
B Length, less booms 4 420 mm (14'6") Based on standard machine configuration, 1/2 full fuel
C Tail swing over side 310 mm (12") tank at 238 kg (525 lbs.), fluids, 75 kg (165 lb.) operator
Shipping Height (cab tilted 6.1° to rear) 3 640 mm (11'11") with 2 206 kg (4,860 lbs.) HTH620 harvesting head.
Height to top of cab in horizontal position 3 810 mm (12'6")

Track System (cont’d)

Track Drives - triple reduction planetary type track drive Traction brakes - in track drive gearbox as standard.
gearboxes with bi-directional variable displacement piston
motors. Drive motors include counterbalance valves to Travel speeds - high (infinitely variable to) 4,0 km/h
protect motors in overrunning conditions. (2.5 mph) Low 1,8 km/h (1.1 mph)

Upper Track slides - wear resistant, replaceable slides Tractive effort - 238 kN (53,550 lbf.)
standard.
Lower Track rollers - (8) D6 size tractor rollers per track
side frame, for longer life.

Track Shoes, †Ground Pressure and *Ground Clearance

Ground Pressure Ground Clearance
56 kPa 740 mm
Standard: 610 mm (24'') Single Grouser
8.2 psi 29''
49 kPa 740 mm
Optional: 710 mm (28'') Single Grouser 7.1 psi 29''
* Measured from tip of single grouser track to underside of carbody.
† Measurements with installed HTH620 Head.
 608L/HTH620 Harvester

Operator's Cab HTH620 Harvester Head

Spacious and strong, with integral protective structure. The versatile Timberjack HTH620 is highly productive in
Green tinted Lexan Margard windows reduce need for thinning or regenerative harvesting in both hardwood and
cage type guarding. Integral “skylight” provides excellent large diameter softwood. Ideal application where 80% of
upwards visibility. Large opening rear window doubles as the timber is 40 cm (16") or less.
a second exit route. Automatically activated travel alarm
and manually activated warning horn. Reverse slope Max. cutting diameter 685 mm (27")
windshield reduces glare and debris accumulation. Max delimbing diameter (knives tip to tip) 580 mm (22.8")
Deluxe fully adjustable cloth suspension seat with seat
belt and armrest mounted joysticks. Low effort joysticks Feeding Mechanism
control all swing, boom and harvester head functions. • Four fully syncronized feed motors with three feed rollers
Complete with storage areas behind the seat and on the • Proportional clamp/delimbing pressure
door, dome light, coat hook and ash tray. • Steel feed rollers with thumbnails
• 10 mm (0.404") Top Saw
Cab, as installed by Timberjack, complies with: SAE J1040
• 10 mm (0.404") Supercut Bottom Saw
ROPS, SAE J231 FOPS and J1084 OPS.
Delimbing knives 1 fixed, 2 moving
Instrumentation (2 lower knives optional)
Feed speed - maximum 4,4 m/s (14.5 ft/s)
Gauges: Engine coolant temperature, Engine oil pressure, Rotator 320° rotation
Hydraulic oil temperature, Voltage, Fuel level, Hourmeter, Head Weight 2 206 kg (4,860 lbs.)
Tachometer. link and rotator included
Warning lights for: Hydraulic oil reservoir level, High
return filter pressure, Low pump inlet suction, and Low Saw equipped with automatic chain tensioner system.
engine coolant level.
Horn system sounds warning for: Loss of engine oil Measuring and Control System
pressure, High engine coolant temperature, High
Timbermatic 10:
hydraulic oil temperature.
Easy to operate system that has up to 18 pre-selections for
Climate Control tree species and assortments.
Adjustment of feed roller pressure, start of feeding and
Unitized cab with inlet air filter, high output heater and saw bar control are all done automatically. The clear menu
air conditioner. Sliding rear window with an insect and easy-to-use joystick controls make the system
screen for enhanced air exchange. Full insulation to user-friendly.
stabilize cab temperature and further reduce interior cab The Timbermatic 10 measures the length and diameter of
noise level. the tree and calculates the total volume produced. It is a
modular system and data is transferred in a digital format.
Electrical System This means fewer wires down the boom thereby
Alternator 24 V, 70 A significantly reducing the risk of errors and enhancing the
Batteries (2) 950 CCA, 185 minutes RC each reliability of the system.
5 quartz Halogen working lights.
2 lights in engine enclosure.
 Standard Equipment
• 10 lb. Fire extinguisher, operator and
parts manuals
• 610 mm (24") single grouser track
shoes are provided with mud/snow relief
holes
• Drive sprockets with mud/snow reliefs

Optional Equipment
• Fire suppression system
• Hydraulic tank heater
• Top rollers in lieu of bolt-on track
slides, two per side
• 24 V to 12 V converter
• Printer kit for the Timbermatic 10
• Rubber feed rollers for HTH620
Harvester Head
• 710 mm (28”) single grouser track shoes

Timberjack Warranty
The Timberjack 608L base carrier and the Timbermatic 10
measuring and control system are completely engineered
by Timberjack. The entire machine is assembled by
Timberjack and is covered under the Timberjack warranty
program.
Consult warranty documentation and local Timberjack
dealer for details.

®Timberjack, Timbermatic, ShiftTilt, and the donkey symbol are trade marks of Timberjack. BP-10M-11/00
The manufacturer reserves the right to make changes or add improvements at any time without
incurring any obligation to make such changes on machines manufactured previously.
Some items shown are optional equipment.

www.timberjack.com
 WARATAH CH95
Harvester Crane
S P E
C I F I C A T I O N S

Outreach diagram Capacity diagram (allowed loads)

3
kg 2250 1690 990
2

1 CH95 - 7.6 m 3 5 7,6

0
CH95 - 7.6
-1
Actual lifting capacity depends on which link, rotator and
-2 harvester head is used.
CH95 - 8.9
-3

-4

-5

-6

-7

-1 0 1 2 3 4 5 6 7 8 9 10

kg 2250 1690 1100 780

CH95 - 8.9 m 3 5 7 8,9

 Waratah
CH95 Harvester Crane
Technical data:

CH95 - 7.6 CH95 - 8.9

Lifting moment, gross kNm 95 95
Max. load kg 900 760
Outreach *) mm 7900 9230
Stroke of boom extension mm 800 2170

Slewing torque, gross kNm 24,4 24,4

Slewing angle ˚ 220 220

Weight without oil, kg 1600 1650

incl. hoses for harvester head

Pump recommendation
Max. working pressure MPa 21,5 21,5

C I F I C A T I O N S
Oil flow l/min 120 120
Power input kW 43 43

*) Outreach is with the Waratah harvester head.

Actual length of the crane is 300 mm shorter.

Main dimensions:

8930
7600

3287
225

800 2170

3433
CH95 - 7.6
S P E
1266

CH95 - 8.9
410
350 Ø26
516
350
410

1027
196
45

slewing angle 220°

We reserve the right to amend these specifications at any time without notice. have not been approved by Waratah as a result of the non-approved inclusion on any
The only warranty provided by Waratah Forestry Attachments is its written Limited Waratah product of any equipment not of Waratah’s design or manufacture. Not all
Warranty, which accompanies and applies to each product sold by Waratah Forestry products are available in all markets. The manufacturer reserves the right to make
Attachments. Waratah disclaims responsibility or liability for any economic loss or changes or add improvements at any time without incurring any obligation to make
personal injury that may occur as a result of any changes to a Waratah product that such changes on machines manufactured previously.

www.waratah.net
 WARATAH CH135
Harvester Crane
S P E
C I F I C A T I O N S

Outreach diagram Capacity diagram (allowed loads)

kg 2600 1910 1230

CH135 - 8.3 m 4 6 8,3

Actual lifting capacity depends on which link, rotator and

harvester head is used.
CH135 - 8.3

CH135 - 9.7

kg 2600 1910 1210 950

CH135 - 9.7 m 4 6 8 9,7

 Waratah
CH135 Harvester Crane
Technical data:

CH135 - 8.3 CH135 - 9.7

Lifting moment, gross kNm 135 135
Max. load kg 1230 950
Outreach *) mm 8600 10 000
Stroke of boom extension mm 800 2170

Slewing torque, gross kNm 38,4 38,4

Slewing angle ˚ 220 220

Weight without oil, kg 2090 2150

incl. hoses for harvester head

Pump recommendation
Max. working pressure MPa 24 24

C I F I C A T I O N S
Oil flow l/min 120 120
Power input kW 50 50

*) Outreach is with the Waratah harvester head.

Actual length of the crane is 300 mm shorter.

Main dimensions:

9700
8300

3994 5370

410

4100
S P E
CH135 - 8.3
CH135 - 9.7

438
200
1502

63 63
ø50
500

ø120
240

97 97 67,5 67,5
200 375
510
1210 Slewing angle 220°

We reserve the right to amend these specifications at any time without notice. have not been approved by Waratah as a result of the non-approved inclusion on any
The only warranty provided by Waratah Forestry Attachments is its written Limited Waratah product of any equipment not of Waratah’s design or manufacture. Not all
Warranty, which accompanies and applies to each product sold by Waratah Forestry products are available in all markets. The manufacturer reserves the right to make
Attachments. Waratah disclaims responsibility or liability for any economic loss or changes or add improvements at any time without incurring any obligation to make
personal injury that may occur as a result of any changes to a Waratah product that such changes on machines manufactured previously.

www.waratah.net
 WARATAH CH175
Harvester Crane
S P E
C I F I C A T I O N S

Outreach diagram Capacity diagram (allowed loads)

kg 4000
4000 2425
2425 1620
1620

CH175 - 8.3 m 4 6 8,3

Actual lifting capacity depends on which link, rotator and

harvester head is used.

CH175 - 8.3

CH175 - 9.0

CH175 - 9.7 kg 3975

3975 2380
2380 1640
1640 1420
1420
CH175 - 9.0 m 4 6 8 9

kg 3975
3975 2380
2380 1640
1640 1320
1320
CH175 - 9.7
m 4 6 8 9,7
 Waratah
CH175 Harvester Crane
Technical data:

CH175 - 8.3 CH175 - 9.0 CH175 - 9.7

Lifting moment, gross kNm 178 178 178
Max. load kg 1620 1420 1320
Outreach *) mm 8680 9300 10 000
Stroke of boom extension mm 800 1440 2170

Slewing torque, gross kNm 43,6 43,6 43,6

Slewing angle ˚ 195/236 195/236 195/236

Weight without oil, kg 2500 2570 2580

incl. hoses for harvester head

Pump recommendation
Max. working pressure MPa 24 24 24

C I F I C A T I O N S
Oil flow l/min 120 120 120
Power input kW 50 50 50

*) Outreach is with the Waratah harvester head.

Actual length of the crane is 300 mm shorter.

Main dimensions:

9700
9000
8380

400

3230 S P E
CH175 - 8.3

4100 800 CH175 - 9.0

CH175 - 9.7
1440
2270

1320 (slewing angle 236˚)

1603

1120 (slewing angle 195˚)

270 58 200
100
M16 250 R6
28

5
260

97
256
438

M16
627
500
90

240
ø 120H9

+1

320 ø 135
63 0

0 R1
530 -1,5 97 05
250

We reserve the right to amend these specifications at any time without notice. have not been approved by Waratah as a result of the non-approved inclusion on any
The only warranty provided by Waratah Forestry Attachments is its written Limited Waratah product of any equipment not of Waratah’s design or manufacture. Not all
Warranty, which accompanies and applies to each product sold by Waratah Forestry products are available in all markets. The manufacturer reserves the right to make
Attachments. Waratah disclaims responsibility or liability for any economic loss or changes or add improvements at any time without incurring any obligation to make
personal injury that may occur as a result of any changes to a Waratah product that such changes on machines manufactured previously.

www.waratah.net
 Return to Index

Go to x
Feller Bunchers

Harvester Heads

Delimbers

Skidders

Forwarders

Processors

Grapples

Winches

Log Loaders

Yarders

Masticators
 Return to Index

Go to Î
Delimbers
Feller Bunchers
Forwarders
Grapples
SMALLWOOD II

Harvesting Heads
Log Loaders
Masticators
Processing
Skidders
Winches
Yarders
 Return to Index

Go to Î
Delimbers
Feller Bunchers
Forwarders
Grapples
SMALLWOOD II

Harvesting Heads
Log Loaders
Masticators
Processing
Skidders
Winches
Yarders