Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 451 views

    SSAS DSAS Mk2 DiagnosticChecklist

    Uploaded by

    krupa kumar
    The document provides a 12-step diagnostic checklist for the DSAS Mk2 vessel monitoring system. The checklist includes steps to remove fuses, check voltage readings, monitor status LED lights and colors, inspect fuses and circuit boards for damage or issues, and ensure the satellite view is unobstructed. Technicians are to complete the checklist when diagnosing any potential issues with the DSAS Mk2 and return it to technical support.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SSAS DSAS Mk2 DiagnosticChecklist

    Uploaded by

    krupa kumar
    451 views3 pages
    The document provides a 12-step diagnostic checklist for the DSAS Mk2 vessel monitoring system. The checklist includes steps to remove fuses, check voltage readings, monitor status LED lights and colors, inspect fuses and circuit boards for damage or issues, and ensure the satellite view is unobstructed. Technicians are to complete the checklist when diagnosing any potential issues with the DSAS Mk2 and return it to technical support.

    Original Description:

    SSAS DSAS Mk2 DiagnosticChecklist

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a 12-step diagnostic checklist for the DSAS Mk2 vessel monitoring system. The checklist includes steps to remove fuses, check voltage readings, monitor status LED lights and colors, inspect fuses and circuit boards for damage or issues, and ensure the satellite view is unobstructed. Technicians are to complete the checklist when diagnosing any potential issues with the DSAS Mk2 and return it to technical support.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    451 views3 pages

    SSAS DSAS Mk2 DiagnosticChecklist

    Uploaded by

    krupa kumar
    The document provides a 12-step diagnostic checklist for the DSAS Mk2 vessel monitoring system. The checklist includes steps to remove fuses, check voltage readings, monitor status LED lights and colors, inspect fuses and circuit boards for damage or issues, and ensure the satellite view is unobstructed. Technicians are to complete the checklist when diagnosing any potential issues with the DSAS Mk2 and return it to technical support.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    DSAS Mk2 DIAGNOSTIC CHECKLIST

    DSAS Mk2 DIAGNOSTIC CHECKLIST

    Vessel name DSAS Mk2 serial number SKY

    Please refer to the attached plan of the unit (Figure 1 at the end of this document) for guidance when
    performing these diagnostic tests.

    1. Remove the metal casing and the top cover from the unit. Remove FUSE2, then remove FUSE1 (see
    Figure 1).

    2. What is the dc voltage across the POWER PACK terminals (remove the 4 pin power pack plug, then
    using a multi-meter test for dc voltage between pins 3 & 4 of the plug? V dc – Replace power
    pack plug when finished.

    3. Replace FUSE1. LED1 STATUS should begin to flash. Yes No


    Then replace FUSE2.

    Note: If LED1 does not start to flash, press and hold the anti-tamper switch (located next to the power
    pack plug) for 10 seconds and then release to initiate the diagnosis process.

    4. Wait two minutes to allow the system to complete a self-diagnosis, indicated on the STATUS LED as
    per below sequence. After two minutes, confirm the LED colour and tick the appropriate box below.

    STATUS LED DESCRIPTION LED


    Tick One

    External power is disconnected or nor consistently within


    RED FLASHING
    the range of 16-30 V dc for a period of 30 seconds
    RED CONSTANT Power Pack is faulty or not connected
    ORANGE FLASHING Alert loop is open, check alert switches/wiring
    ORANGE CONSTANT No RS-232 communication from IDP-690
    GREEN FLASHING GPS position not valid
    GREEN CONSTANT DSAS Mk2 diagnostics passed – SYSTEM OK

    5. Is LED2 Err flashing? Yes No

    6. What is the dc voltage at the ’24 V IN +’ and ’24 V IN –’ terminals (refer to figure 1 for terminal
    locations) ? V dc

    7. Is there an ac component in the supply voltage? (Set meter to V ac.) Yes No


    Reading:

    8. Check all fuses. Are they OK?

    FUSE1 Yes No

    FUSE2 Yes No

    FUSE3 Yes No

    Issue: July 2013 Page 1 of 3


    DSAS Mk2 DIAGNOSTIC CHECKLIST

    9. Do a visual check of the circuit board. Do any components appear to be damaged? If so, which ones?

    10. Check that the black plastic connector is securely attached to the underside of the IDP-690 transceiver
    and that the locking ring is tight (it will be necessary to unscrew the two Flat head screws on the base
    plate to check this).

    11. Check that the installation has a clear view of the satellite with no obstructions. Are there any other
    communications and/or electronic installations mounted within 2 metres of the DSAS Mk2? If so, how
    close are they?

    12. Return this completed checklist to Pole Star Technical Support or your Pole Star distributor.

    Issue: July 2013 Page 2 of 3


    DSAS Mk2 DIAGNOSTIC CHECKLIST

    Q Q
    47 Y 47 Y
    0 0

    Figure 1: Plan view of DSAS Mk2 unit

    Issue: July 2013 Page 3 of 3

    You might also like