VOLVO WHEEL LOADERS

l150g, l180g, l220g

23.6–32.8t 300 – 371 hp

1
A passion for performance.
At Volvo Construction Equipment, we’re not just
coming along for the ride. Developing products
and services that raise productivity – we are
confident we can lower costs and increase profits
for industry experts. Part of the Volvo Group, we
are passionate about innovative solutions to help
you work smarter – not harder.

Helping you to do more

Doing more with less is a trademark of Volvo Construction Equipment.
High productivity has long been married to low energy consumption,
ease of use and durability. When it comes to lowering life-cycle costs,
Volvo is in a class of its own.

Designed to fit your needs

There is a lot riding on creating solutions that are suited to the particular
needs of different industry applications. Innovation often involves high
technology – but it doesn’t always have to. Some of our best ideas
have been simple, based on a clear and deep understanding of our
customers’ working lives.

You learn a lot in 175 years

Over the years, Volvo has advanced solutions that have revolutionized
the use of construction equipment. No other name speaks Safety louder
than Volvo. Protecting operators, those around them and minimizing our
environmental impact are traditional values that continue to shape our
product design philosophy.

We’re on your side

We back the Volvo brand with the best people. Volvo is truly a global
enterprise, one that is on standby to support customers quickly and
efficiently – wherever they are.

We have a passion for performance.

Volvo Trucks Renault Trucks Mack Trucks

2
UD Trucks Volvo Buses Volvo Construction Equipment Volvo Penta Volvo Aero Volvo Financial Services
Loaded, to lift up your profits.

Enter the cab to see and feel what makes the Volvo Care Cab a Volvo Care Cab
The Volvo Care Cab provides the
legend in comfort. Visibility is excellent to the rear and to the bucket
industry standard for operator
edge. Operator controls are in ergonomically positions. Breathe and comfort and safety. It’s spacious, with plenty of
foot, leg and personal space. The Volvo Care
work at ease in clean, quiet comfort. It’s loaded with features to keep Cab applies to ROPS/FOPS standards.
your extended focus on profit-enhancing productivity.

4
 Air Filter Excellent visibility
Breathe easier with the best cab air climate See it all and do it all in your Volvo wheel
in the industry. The well placed cab air intake loader. Wide windows and narrow cab columns
is placed high up to stay away from dusty air put you in command with clear, all-around
from the tires. The easy-to-replace pre-filter visibility. Very good view to the attachment/
separates out course particles. Then 90% of corners. Improves comfort and jobsite safety,
the cab air is circulated through the main filter, for greater productivity.
resulting in very clean air.

Electro hydraulic servo controls Climate control comfort

The servo controls are mounted on the Volvo’s high sufficient climate control allows
operator seat, for consistent positioning in the operator to have nice cab temperature no
relation to seat movements and jostles. The matter the weather conditions. Select between
high quality servo controls includes for the the standard Automatic Heat Control (AHC) or
operator easy individual settings by push optional Air Conditioning (AC). A comfortable
button features like return to dig, boom & tilt operator is a more productive operator.
detent and end dampening from inside the
cab. Relaxed operation and comfort.
Noise reduction
Noise and vibration dampening
make for a low interior cab
sound level.

5
Carry the load every day.
Volvo gives you all the power you need. But the true Volvo edge comes from the combination of power
with efficiency, durability throughout and, above all, profitability. That’s how Volvo wheel loaders help you
do more every day.

Automatic Power Shift Durable TP linkage

Automatic Power Shift (APS) operates in the ideal gear by sensing Volvo’s patented Torque Parallel linkage delivers high breakout torque
engine/ travel speed, kick down, engine braking and more. Select throughout the entire range, including the highest lift position. Ideal for
FAPS (fully automatic) to eliminate need for manual 1st gear kick down log handling. Also provides very good parallel movement. The standard
shifting. Results in more efficient work cycles with less wear and lower double sealed pins and bushings are designed to withstand the toughest
fuel consumption. working environments for demanding customers.

Engine performance
The new 13 liter 6 cylinder high performance, low fuel consumption
turbocharged diesel engine equipped with the cooled exhaust
recirculation particle filter makes the Volvo engine very reliable thanks to
high torque at low engine speeds.

6
 Load-sensing hydraulics
Uses variable-flow, axial piston pumps for superior
control of the load and attachments. High breakout
force. Faster lift and tilt functions for shorter cycle times. High
capacity pumps deliver reliability, high performance/productivity
and low fuel consumption.

7
Designed for performance.
They only judge you on what you get done. That’s why Volvo L150G, L180G and L220G loaders are built
to help you do more. It’s where heavy-duty design meets nimble efficiency, better response and faster
cycles. Meet and exceed demand in demanding conditions – day after day, year after year.

Drive line lock-up Heavy duty axles

To prevent power loss in the torque converter, the pump rotor and turbine Volvo axles are the heavy-duty, axle wet brake type. The axle housings
rotor on the torque converter lock together through a direct drive clutch. absorb all the machine/load weight distribution, allowing the axle
Improves drive response, rimpull performance and fuel efficiency. Better shafts to only transmit torque to the planetary hub reductions. Reduced
incline climbing performance and faster cycles in load & carry operations. working stresses for longer service life.

Reverse By Brake/OptiShift
The unique Volvo-patented Reverse By Brake (RBB) applies the standard
service brake instead of the torque converter. Less loading stress on the
torque converter and transmission. More fuel efficiency and deceleration
comfort. Ideal for short cycle or truck loading.
OptiShift includes the torque converter with Lock-Up and Reverse
By Brake. Improves loading cycles, incline climbing performance, fuel
efficiency and comfort, including during deceleration.

8
 Volvo purpose-built drivetrain
Volvo delivers a perfectly optimized, purpose-built
drivetrain – built by Volvo to work together. Includes
Volvo engine, transmission and axles, well matched to the hydraulic
and steering system. This harmony delivers lower fuel consumption
and better engine response, even at lower RPM.

9
Spend more time working.

Variable Geometry Turbocharger Contronics

Volvo´s new VGT features the engine coolant Volvo Contronics is a computerized
continuously cooling the turbocharger bearing machine electronics and monitoring system.
housing. Heat reduction is a proactive way to Continuously monitors the machine, operation
ensure good oil quality, long turbo life and and performance in real time. Provides
minimum downtime. The VGT is designed to diagnostic functions and information needed
continually vary the airflow into the engine for optimal operation. Fast, easy electronic
contributing to excellent engine response level checks. More uptime each day.
across the entire engine speed range.

Axle cradles Battery disconnect switch

Maintenance-free, casted axle cradles. Rear- The battery disconnect switch is safely and
axle bridge connects the axle to the frame. conveniently located directly under the battery
Includes two, grease-lubricated-for- life roller box located at the left hand side cab ladder.
bearings. Front bridge includes two oil bath, Quick and easy power disconnect. Saves time,
pre-filled-for-life bushings. Minimizes forces money and safety concerns when service is
on the axle. Helps to maintain a low center of needed or to prevent battery discharge during
gravity. long shutdown periods.

10
The faster you can get working each day, the more you’ll do and the Engine hood design
Newly-designed engine hood
more you’ll earn. That’s why Volvo wheel loaders are built with quick
can be electronically opened
and easy service access, advanced monitoring and more safety. With backwards. Easy opening and closing
with a wide open position angle. Excellent
more maintenance-free parts and components you get more worry- access for fast and easy service/cleaning.
free reliability. Provides improved ventilation of the engine
compartment.

11
Smart load sense.

Care Cab
ROPS/FOPS tested roomy cab
with ideally placed controls and
Contronics excellent operator visibility.
Computerized, real-time machine
diagnostics and monitoring system.

Engine hood access

New electronically-opening design
for ideal access and ventilation.

Load-sensing hydraulics
Variable-flow, axial piston
pumps for superior control
and high breakout force.

Eco-friendly
Low fuel consumption
and Tier 4 Interim/
Stage IIIB-compliant emissions.

Volvo Power
13 liter 6 cylinder water cooled turbo engine
for low fuel consumption. Dependable power
with high torque at low RPM, cooled exhaust
recirculation and active regeneration.

12
Servo controls
Mounted on the operator seat
for comfortable operation and
control.
CareTrack*
CareTrack is the Volvo telematics system.
It is equipped as standard on this
machine and is designed to provide information to
help improve productivity and efficiency.

Eco pedal
Mechanical counter pressure encourages
fuel-saving ease with the accelerator pedal.

TP linkage
Excellent link geometry for high
breakout torque along with very
good parallel movement.

Heavy-duty axles
OptiShift Absorb the weight for optimal torque,
Includes the torque converter with reduced stresses and longer life.
Lock-Up and Reverse By Brake. For
lower fuel consumption in most applications

* In markets where CareTrack is available

13
 Hard at work, not on the planet.

A lean, green machine

The environmentally-friendly Volvo engine delivers a
low noise level, for more comfort inside and outside
the machine. Electronic fuel injection achieves optimized power,
yet low fuel consumption.

14
Looking out for the environment is everyone’s concern. It is a core value of Volvo and built into every one
of our machines. This commitment helps you work hard, but not at the expense of our planet. Lower
emissions, noise and fuel usage. That’s Volvo.

Accelerator eco pedal Diesel Particulate Filter with regeneration

The accelerator pedal applies an appropriate amount of mechanical The active-type Diesel Particulate Filter (DPF) includes a regeneration
counter pressure (push back) to encourage the operator to engage the burner. The system temporarily holds the exhaust and then incinerates it,
pedal with ease. This economical pedal feature helps avoid unnecessarily further reducing hydrocarbon/ carbon emissions. Process results in no
excessive fuel use. Provides lower fuel consumption. loss of operation or performance..

V-ACT
Volvo V-ACT engine
The Volvo V-ACT engine is environmentally responsible with low
emission levels that meet Tier 4 Interim/Stage IIIB requirements.
More peace of mind when working in sensitive environments.
Provides the ability to derive high torque performance while working
more efficiently at low engine speeds.

15
Connect and go.
All genuine Volvo attachments are purpose-built with the same quality
as the rest of the machine. They’re designed as an integrated part of
the wheel loader for which they were intended, their functions and
properties perfectly matched to parameters such as link-arm geometry
and breakout, rim pull and lifting force. That’s why the machine and
attachment work in perfect harmony, forming a dependable cohesive
unit to get the job done – safely and efficiently.

Rehandling buckets increase fuel efficiency:

Optimized shape for rehandling gives faster,
Spill guard for less spillage more efficient bucket fill and up to 10 %
better fuel efficiency

Side cutters in line with bucket

sides and optimised shape of
wear plate for longer service
life

Available with optional Bolt-on

Fewer pockets where edge (BOE), made of HB500
material get stuck steel

Wear plates and bucket shell made of

HB400 steel. Bucket edge made of
HB500 steel

Volvo Tooth system

The Volvo patented vertical locking
device makes mounting and
removing fast and easy. For Volvo
buckets there are a also wide
selection of cutting edges and
segments in high strength steel 500
HB to protect the bucket from wear.
16
17
TOP PERFORMANCE DESERVES SUPPORT.
The day you receive your new Volvo Wheel Loader is just the start of your working relationship with Volvo.
From service and maintenance to our CareTrack telematics system – Volvo has a comprehensive and
sophisticated aftermarket portfolio to continuously add value to your business.

Volvo designed and built your machines, so no-one knows how to keep Our technicians work with industry leading diagnostic tools and
them working in top condition more than us. When it comes to your techniques, using only Genuine Volvo Parts to deliver the highest levels
machine, our Volvo trained technicians are the experts. of quality and service. Talk to your Volvo dealer about how genuine Volvo
services can best provide the service and maintenance plan that is the
right fit for you and your business.

State-of-the-art machines require state-of-the-art support and your

Volvo dealer can provide a catalogue of services designed to get the
most out of your machine, helping you maximise uptime, productivity and
residual value. Your Volvo dealer can provide a number of sophisticated
support offers, including:
Service plans ranging from routine wear inspections, through to
comprehensive maintenance and repair agreements.
Analysis and diagnostics to help you understand how your machine
is running, highlight potential maintenance issues and identify where
performance can be improved.
Eco Operator training courses can help your operators work towards a
safer, more productive and fuel efficient performance.

18
 CareTrack*
Each Volvo Wheel Loader comes standard equipped
with CareTrack, the Volvo telematics system. CareTrack
provides information for better planning and smarter working;
including fuel consumption reports, location reports and service
reminders. Save fuel. Reduce costs. Maximise profitability. You can
with CareTrack.
* In markets where CareTrack is available

19
Volvo L150G, l180G, L220g IN DETAIL.

Engine
13 liter, 6-cylinder straight turbocharged diesel engine with 4
valves per cylinder, overhead camshaft and electronically controlled
unit injectors. The engine has wet replaceable cylinder liners and
replaceable valve guides and valve seats. The throttle applications
is transmitted electrically from the throttle pedal or the optional
hand throttle. Air cleaning: Three-stage Cyclone precleaner -
primary filter - secondary filter. Cooling system: Hydrostatic,
electronically controlled fan and intercooler of the air-to-air type.
L150G L150G
Engine D13H-E (Tier 4i)
D13H-F (Stage IIIB) 300 1400
220
Max power at r/s (r/min) 21.7 (1 300) 200
1800
250
SAE J1995 gross kW / hp 220 / 300 180 1600 1200
160
ISO 9249, SAE J1349 net kW / hp 220 / 300 200
140
1400
1000
Max torque at r/s (r/min) 17.5 (1 050) 120 1200
150
800
SAE J1995 gross Nm 1 871 100
1000
80
ISO 9249, SAE J1349 Nm 1 869 100
60 800 600
Economic working range r/min 800–1 600 800 1000 1200 1400 1600 1800 2000

Displacement l 12.8

L180G L180G
Engine D13H-E (Tier 4i)
D13H-F (Stage IIIB)
350 260
21.7-23.3 2000
Max power at r/s (r/min) 240 1400
(1 300–1 400) 300 220
1800
1200
SAE J1995 gross kW / hp 246 / 334 200 1600
250 180
ISO 9249, SAE J1349 net kW / hp 245 / 333 160
1400 1000
1200
Max torque at r/s (r/min) 16.7 (1 000) 200
140 800
1000
SAE J1995 gross Nm 2 030 150
120
100 800 600
ISO 9249, SAE J1349 net Nm 2 024 800 1000 1200 1400 1600 1800 2000
Economic working range r/min 800–1 600
Displacement l 12.8

L220G L220G
Engine D13H-E (Tier 4i)
D13H-F (Stage IIIB) 2200
280 1600
21.7-23.3 350 260
Max power at r/s (r/min) 2000
(1 300-1 400) 240
300 1400
SAE J1995 gross kW / hp 274 / 373 220
1800
200
ISO 9249, SAE J1349 net kW / hp 273 / 371 250 180 1600 1200
160
Max torque at r/s (r/min) 18.3 (1 100) 200
140 1400 1000
SAE J1995 gross Nm 2 231 120

ISO 9249, SAE J1349 net Nm 2 220 800 1000 1200 1400 1600 1800 2000

Economic working range r/min 800–1 600

Displacement l 12.81

20
Drivetrain Electrical system
Torque converter: Single-stage. Central warning system: Contronic electrical system with central
Transmission: Volvo countershaft transmission with single lever warning light and buzzer for following functions: - Serious engine
control. Fast and smooth shifting of gears with Pulse Width fault - Low steering system pressure - Over speed warning
Modulation (PWM) valve. Torque converter with lockup. engine - Interruption in communication (computer fault) Central
Transmission: Volvo Automatic Power Shift (APS) with fully warning light and buzzer with the gear engaged for the following
automatic shifting 1-4 and mode selector with 4 different gear functions. - Low engine oil pressure - High engine oil temperature
shifting programs, including AUTO. - High charge air temperature - Low coolant level - High coolant
Axles: Volvo fully floating axle shafts with planetary hub reductions temperature - High crank case pressure - Low transmission
and nodular iron axle housing. Fixed front axle and oscillating rear oil pressure - High transmission oil temperature - Low brake
axle. 100% differential lock on the front axle. Optional: Limslip rear pressure - Engaged parking brake - Fault on brake charging - Low
hydraulic oil level - High hydraulic oil temperature - Overspeeding
L150G in engaged gear - High brake cooling oil temperature front and
Transmission Volvo HTL 221 rear axles.
Maximum speed, 1st gear km/h 6.5
L150G, L180G, L220G
forward/reverse 2nd gear km/h 12.5
Voltage V 24
3rd gear km/h 26.0
Batteries V 2 x 12
4th gear* km/h 38.0
Battery capacity Ah 2 x 170
Measured with tires 26.5 R25 L3
Cold cranking capacity, approx A 1 000
Front axle/rear axle Volvo/AWB 40B/40B
Batteries connected to postiv terminal
Rear axle oscillation ± ° 15
Alternator rating W/A 2 280/80
Ground clearance at 15° osc. mm 610
Starter motor output kW 7.0

L180G
Brake system
Transmission Volvo HTL 221
Service brake: Volvo dual-circuit system with nitrogen charged
Maximum speed, 1st gear km/h 6.5
accumulators. Outboard mounted hydraulically operated, fully
forward/reverse 2nd gear km/h 12.5 sealed oil circulation-cooled wet disc brakes. The operator can
3rd gear km/h 26.0 select automatic disengagement of the transmission when braking
4th gear* km/h 38.0 using Contronic.
Measured with tires 26.5 R25 L3 Parking brake: Fully sealed, wet multi-disc brake built into the
Front axle/rear axle Volvo/AWB 40B/40B transmission. Applied by spring force and electro-hydraulically
Rear axle oscillation ± ° 15 release dwith a switch on the instrument panel.
Ground clearance at 15° osc. mm 610 Secondary brake: Dual brake circuits with rechargeable
accumulators. One circuit or the parking brake fulfills all safety
requirements..
L220G
Standard: The brake system complies with the requirements of
Transmission Volvo HTL 306 ISO 3450.
Maximum speed, 1st gear km/h 7.0
forward/reverse 2nd gear km/h 12.5 L150G
3rd gear km/h 25
Number of brake discs per wheel front/rear 1/1
4th gear* km/h 38.0
Accumulators l 2x1.0 3x0.5
Measured with tires 29.5 R25 L4
Front axle/rear axle Volvo/AWB 50/41 L180G
Rear axle oscillation ± ° 15 Number of brake discs per wheel front/rear 1/1
Ground clearance at 15° osc. mm 600 Accumulators l 2x1.0 1x0.5
*) limited by ECU L220G
Number of brake discs per wheel front/rear 2/1
Accumulators l 2x1.0 1x0.5

21
Volvo L150G, l180G, L220g IN DETAIL.

Cab Lift arm system

Instrumentation: All important information is centrally located Torque Parallel linkage (TP-linkage) with high breakout torque and
in the operator’s field of vision. Display for Contronic monitoring parallel action throughout the entire lifting range.
system. L150G
Heater and defroster: Heater coil with filtered fresh air and fan Lift cylinders 2
with auto and 11 speeds. Defroster vents for all window areas.
Cylinder bore mm 160
Operator’s seat: Operator’s seat with adjustable suspension and
Piston rod diameter mm 90
retractable seatbelt. The seat is mounted on a bracket on the rear
cab wall and floor. The forces from the retractable seatbelt are Stroke mm 784
absorbed by the seat rails. Tilt cylinder 1
Standard: The cab is tested and approved according to ROPS Cylinder bore mm 220
(ISO 3471), FOPS (ISO 3449). The cab meets with requirements Piston rod diameter mm 110
according to ISO 6055 (Operator overhead protection - Industrial Stroke mm 452
trucks) and SAE J386 (”Operator Restraint System”).
L150G L180G
Emergency exit: Use emergency hammer to break window Lift cylinders 2
Sound level in cab according to ISO 6396/SAE J2105 Cylinder bore mm 180
LpA dB(A) 69 Piston rod diameter mm 90
External sound level according to ISO 6395/SAE J2104 Stroke mm 788
LwA dB(A) 108 Tilt cylinder 1
Ventilation m3/min 9 Cylinder bore mm 240
Heating capacity kW 16 Piston rod diameter mm 120
Air conditioning (optional) kW 7.5 Stroke mm 480

L180G L220G
Emergency exit: Use emergency hammer to break window Lift cylinders 2
Sound level in cab according to ISO 6396/SAE J2105 Cylinder bore mm 190
LpA dB(A) 70 Piston rod diameter mm 90
External sound level according to ISO 6395/SAE J2104 Stroke mm 768
LwA dB(A) 108 Tilt cylinder 1
Ventilation m3/min 9 Cylinder bore mm 250
Heating capacity kW 16 Piston rod diameter mm 120
Air conditioning (optional) kW 7.5 Stroke mm 455

L220G
Emergency exit: Use emergency hammer to break window
Sound level in cab according to ISO 6396/SAE J2105
LpA dB(A) 70
External sound level according to ISO 6395/SAE J2104
LwA dB(A) 109
Ventilation m3/min 9
Heating capacity kW 16
Air conditioning (optional) kW 7.5

22
Hydraulic system Steering system
System supply: Two load-sensing axial piston pumps with variable Steering system: Load-sensing hydrostatic articulated steering.
displacement. The steering function always has priority. System supply: The steering system has priority feed from a load-
Valves: Double-acting 2-spool valve. The main valve is controlled sensing axial piston pump with variable displacement.
by pilot pressure and electric servo (L150G) i.e. by a 2-spool pilot Steering cylinders: Two double-acting cylinders.
valve (L180G/L220G). L150G L180G L220G
Lift function: The valve has three positions: raise, hold and lower Steering cylinders 2 2 2
position. Inductive/magnetic automatic boom kickout can be Cylinder bore mm 100 100 100
switched on and off and is adjustable to any position between
Rod diameter mm 60 60 60
maximum reach and full lifting height.
Tilt function: The valve has three functions including rollback, hold Stroke mm 390 525 525
and dump. Inductive/magnetic automatic tilt can be adjusted to the Working pressure MPa 21 21 21
desired bucket angle. Maximum flow l/min 188 188 191
Cylinders: Double-acting cylinders for all functions. Maximum articulation ±° 37 37 37
Filter: Full flow filtration through 10 micron (absolute) filter
cartridge.
Service
L150G L180G L220G
Service accessibility: Large, easy-to-open hood covering
Working pressure
MPa 29.0 29.0 29.0 whole engine department, electrically operated. Fluid filters
maximum, pump 1
and component breather air filters promote long service
Flow l/min 180 217 253 intervals. Possibility to monitor, log and analyze data to facilitate
at MPa 10 10 10 troubleshooting.
engine speed r/s(r/min) 32(1 900) 32(1 900) 32(1 900) L150G L180G L220G
Working pressure Fuel Tank l 335 335 335
MPa 31.0 31.0 31.0
maximum, pump 2 Engine coolant l 46 46 46
Flow l/min 202 202 202 Hydraulic oil tank l 156 156 226
at MPa 10 10 10 Transmission oil l 48 48 48
engine speed r/s(r/min) 32(1 900) 32(1 900) 32(1 900) Engine oil l 50 50 50
Working pressure Axle oil front/rear l 45/55 45/55 77/71
MPa 25.0 25.0 25.0
maximum, pump 3
Flow l/min 77 77 77
at MPa 10 10 10
engine speed r/s(r/min) 32(1 900) 32(1 900) 32(1 900)
Pilot system,
MPa 3.5 3.5 3.5
working pressure
Cycle times
Lift s 5.9 6.4 6.8
Tilt* s 2.0 1.8 1.6
Lower, empty s 3.7 3.3 3.2
Total cycle time s 11.6 11.5 10.6

23
SPECIFICATIONS.
Tires L150G, L180G: 26.5 R25 L3. Tires L220G: 29.5 R25 L4

Standard boom Long boom

L150G L180G L220G L150G L180G L220G
B mm 7 070 7 190 7 480 7 570 7 620 7 800
C mm 3 550 3 550 3 700 3 550 3 550 3 700
D mm 470 480 540 460 480 540
F mm 3 570 3 580 3 740 3 560 3 580 3 740
G mm 2 134 2 134 2 131 2 134 2 133 2 133
J mm 3 910 4 050 4 240 4 480 4 540 4 600
K mm 4 320 4 470 4 670 4 890 4 960 5 030
O ° 58 57 56 59 55 56
Pmax ° 50 49 48 49 49 48
R ° 45 45 43 48 49 44
R1* ° 48 48 47 53 53 49
S ° 66 71 65 61 63 63
T mm 106 140 111 161 223 117
U mm 510 550 590 630 650 670 a4 Where applicable, specifications
X mm 2 280 2 280 2 400 2 280 2 280 2 400 and dimensions are according
V
Y mm 2 960 2 960 3 170 2 960 2 960 3 170 a1 to ISO 7131, SAE J732, ISO
Z mm 3 490 3 810 4 060 3 950 4 170 4 390 7546, SAE J742, ISO 14397,
SAE J818.
a2 mm 6 780 6 780 7 110 6 780 6 780 7 110
a3 mm 3 830 3 830 3 940 3 830 3 830 3 940
a4 ±° 37 37 37 37 37 37
* Carry position SAE

a3
L150G Sales code: WLA80713
Operating weight (incl. logging cw 1 140 kg): 25 660 kg a2
Operating load: 7 700 kg

L180G Sales code: WLA80027

Operating weight (incl. logging cw 1 140 kg): 28 470 kg
Operating load: 8 710 kg

L220G Sales code: WLA80852

Operating weight (incl. logging cw 870 kg): 32 810 kg
Operating load: 10 080 kg X
Y

Tires L150G, L180G: 775/65 R29 L3

Tires L220G: 875/65 R29 L4

L150G L180G L220G

A m2 3.1 3.5 4.0
B mm 3 660 3 870 3 920
C mm 2 110 2 150 2 270
D mm 2 960 3 150 3 160
E mm 1 650 1 720 1 780
F mm 1 630 1 700 1 640
G mm 2 930 3 040 3 230
H mm 4 990 5 170 5 350
I mm 7 270 7 610 7 730
J mm 3 080 3 370 3 620
K mm 3 340 3 710 3 940
L mm 2 290 2 410 2 630
M mm 9 680 9 980 10 380

24
L150G

REHANDLING GENERAL PURPOSE ROCK* LIGHT

MATERIAL
Tires 26.5 R25 L3

LONG
BOOM

4 m3 4.4 m3 4.8 m3 5.2 m3 4 m3 4.4 m3 4.5 m3 3.5 m3 6.8 m3

STE P STE P STE P STE P STE P STE P STE P SPN P LM P
BOE BOE BOE BOE T SEG T SEG T SEG T SEG

Volume, heaped ISO/SAE m3 4.0 4.4 4.8 5.2 4.0 4.4 4.5 3.5 6.8 -
Volume at 110% fill factor m3 4.4 4.8 5.3 5.7 4.4 4.8 5.0 3.9 7.5 -
Static tipping load, straight kg 19 850 19 590 19 310 19 160 17 610 17 230 17 620 18 300 16 550 -3 490
at 35° turn kg 17 700 17 440 17 170 17 020 15 710 15 330 15 710 16 320 14 710 -3 210
at full turn kg 17 460 17 200 16 920 16 780 15 500 15 110 15 490 16 090 14 500 -3 180
Breakout force kN 201.1 191.5 183.2 182.6 202.0 192.7 190.5 187.9 146.6 9
A mm 8 590 8 670 8 740 8 750 8 800 8 880 8 890 8 850 9 140 510
E mm 1 230 1 300 1 360 1 370 1 410 1 480 1 500 1 450 1 710 10
H**) mm 3 030 2 970 2 920 2 920 2 880 2 830 2 820 2 870 2 620 570
L mm 5 730 5 780 5 880 5 870 5 870 5 980 5 890 5 980 6 090 560
M**) mm 1 220 1 270 1 320 1 320 1 350 1 400 1 410 1 420 1 560 -20
N**) mm 1 800 1 830 1 860 1 860 1 870 1 890 1 900 1 930 1 940 450
V mm 3 200 3 200 3 200 3 400 3 230 3 230 3 000 3 230 3 200 -
a1 clearance circle mm 14 640 14 670 14 700 14 890 14 750 14 790 14 580 14 800 14 900 -
Operating weight kg 24 490 24 700 24 890 25 020 23 680 24 020 23 780 24 930 23 990 410
*) With L5 tires Note: This only applies to genuine Volvo attachments.
**) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)

Bucket Selection Chart L150G

The chosen bucket is determined by the density of the material and the expected
bucket fill factor. The actual bucket volume is often larger than the rated capacity, 4,4 m3 4,6 4,4
Rehandling*

due to the features of the TP linkage, including an open bucket design, good
4,8 m 3
5,0 4,8
rollback angles in all positions and good bucket filling performance. The example
represents a standard boom configuration. 5,2 m3 5,5 5,2
Example: Sand and gravel. Fill factor ~ 105%. Density 1.6 t/m3.
Result: The 4.0 m3 bucket carries 4.2 m3. For optimum stability always consult
purpose
General

4,0 m3 4,4 4,0

the bucket selection chart. 4,8 4,4

4,4 m3
ISO/SAE
material Rock purpose Rehandling* material Rock

Material bucket Actual 3,5 m3 3,5 3,3

density, volume, volume,

Light

Material Bucket fill, % t/m3 m3 m3 6,8 m3 6,8

~ 1.6 4.0 ~ 4.4

~ 110
Earth/Clay ~ 1.5 4.4 ~ 4.8 4,0 m3 4,2 4,0

4,4 m3 4,6 4,4

~ 1.6 4.0 ~ 4.2
Sand/Gravel ~ 105
~ 1.5 4.4 ~ 4.6
General

3,7 m3 4,1 3,7

~ 1.8 4.4 ~ 4.4

Aggregate ~ 100 3,5 m3 3,5 3,3
~ 1.7 4.8 ~ 4.8
~ 1.5 5.2 ~ 5.2
Light

6,8 m3 6,8
~ 1.7 3.5 ~ 3.5
Rock ≤100

The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
* Including counterweight

Supplemental Operating Data

Standard boom Long boom

Tires 26.5 R25 L3 26.5 R25 L4 26.5 R25 L5 775/65 R29 L3 26.5 R25 L4 26.5 R25 L5 775/65 R29 L3

Width over tires mm +5 +30 +180 +5 +30 +180

Ground clearance mm +18 +30 +10 +18 +30 +10

Tipping load, full turn kg +250 +760 +590 +220 +640 +500

Operating weight kg +400 +1 060 +760 +400 +1 050 +750

25
SPECIFICATIONS.
L180G

REHANDLING GENERAL PURPOSE ROCK* LIGHT

MATERIAL
Tires 26.5 R25 L3

LONG
BOOM

4.8 m3 5.2 m3 5.5 m3 5.8 m3 4.4 m3 4.6 m3 4.8 m3 4.2 m3 7.8 m3

STE P STE P STE P STE P STE P STE P STE P SPN P LM P
BOE BOE BOE BOE T SEG T SEG T SEG T SEG

Volume, heaped ISO/SAE m3 4.8 5.2 5.5 5.8 4.4 4.6 4.8 4.2 7.8 -
Volume at 110% fill factor m3 5.3 5.7 6.1 6.4 4.8 5.1 5.3 4.6 8.6 -
Static tipping load, straight kg 22 930 22 780 22 610 22 480 21 080 21 100 20 900 21 650 19 710 -3 760
at 35° turn kg 20 310 20 160 20 000 19 870 18 700 18 710 18 520 19 190 17 390 -3 430
at full turn kg 20 010 19 870 19 700 19 580 18 420 18 440 18 250 18 910 17 130 -3 390
Breakout force kN 224.8 224.2 216.2 209.9 236.3 236.3 226.7 212.6 173.4 4
A mm 8 890 8 890 8 960 9 010 9 010 9 010 9 080 9 140 9 360 470
E mm 1 420 1 430 1 490 1 540 1 540 1 540 1 600 1 650 1 860 20
H**) mm 3 060 3 060 3 010 2 980 2 970 2 970 2 930 2 910 2 700 500
L mm 6 020 6 010 6 040 6 110 6 120 6 170 6 170 6 320 6 300 490
M**) mm 1 330 1 340 1 380 1 410 1 410 1 410 1 460 1 520 1 610 20
N**) mm 1 960 1 970 1 990 2 010 2 000 2 000 2 030 2 080 2 060 420
V mm 3 200 3 400 3 400 3 400 3 230 3 230 3 230 3 230 3 400 -
a1 clearance circle mm 14 800 14 990 15 010 15 040 14 880 14 880 14 910 14 960 15 220 -
Operating weight kg 27 340 27 460 27 560 27 630 26 460 26 500 26 560 27 720 26 740 310
*) With L5 tires Note: This only applies to genuine Volvo attachments.
**) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)

Bucket Selection Chart L180G

The chosen bucket is determined by the density of the material and the expected
bucket fill factor. The actual bucket volume is often larger than the rated capacity, 5,2 m3 5,5 5,2
Rehandling*

due to the features of the TP linkage, including an open bucket design, good 5,5 m3 5,8 5,5
rollback angles in all positions and good bucket filling performance. The example
represents a standard boom configuration. 5,8 m3 6,1 5,8

Example: Sand and gravel. Fill factor ~ 105%. Density 1.6 t/m3.
4,4 m3 4,8 4,4
Result: The 4.6 m3 bucket carries 4.8 m3. For optimum stability always consult
purpose
General

the bucket selection chart. 4,6 m3 5,1 4,6

ISO/SAE 4,8 m3 5,3 4,8

Material bucket Actual
material Rock purpose Rehandling* material Rock

4,2 m3 4,2 4,0

density, volume, volume,
Material Bucket fill, % t/m3 m3 m3
Light

7,8 m3 7,8
~ 1.7 4.4 ~ 4.8
~ 110
Earth/Clay ~ 1.6 4.6 ~ 5.1 4,8 m3 5,0 4,8
~ 1.5 4.8 ~ 5.3
5,2 m3 5,5 5,2
~ 1.7 4.4 ~ 4.6
Sand/Gravel ~ 105
~ 1.6 4.6 ~ 4.8
General

~ 1.5 4.8 ~ 5.1 4,4 m3 4,8 4,4

~ 1.8 5.2 ~ 5.2

Aggregate ~ 100
~ 1.7 5.5 ~ 5.5 4,2 m3 4,2 4,0

~ 1.6 5.8 ~ 5.8

Light

7,8 m3 7,8
~ 1.7 4.3 ~ 4.3
Rock ≤100

The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
* Including counterweight

Supplemental Operating Data

Standard boom Long boom

Tires 26.5 R25 L3 26.5 R25 L4 26.5 R25 L5 775/65 R29 L3 26.5 R25 L4 26.5 R25 L5 775/65 R29 L3

Width over tires mm +5 +30 +130 +5 +30 +130

Ground clearance mm +18 +40 +10 +18 +40 +10

Tipping load, full turn kg +280 +770 +600 +250 +760 +530

Operating weight kg +400 +1 050 +920 +400 +1 050 +1 120

26
L220G

REHANDLING GENERAL PURPOSE ROCK* LIGHT

MATERIAL
Tires 29.5 R25 L4

LONG
BOOM

5.6 m3 5.9 m3 6.3 m3 4.9 m3 5.2 m3 5.6 m3 4.5 m3 5.0 m3 8.2 m3

STE P STE P STE P STE P STE P STE P SPN P SPN P LM P
Additional machine specification BOE BOE BOE T SEG T SEG T SEG T SEG T SEG

Volume, heaped ISO/SAE m3 5.6 5.9 6.3 4.9 5.2 5.6 4.5 5.0 8.2 -
Volume at 110% fill factor m3 6.2 6.5 6.9 5.4 5.7 6.2 5.0 5.5 9.0 -
Static tipping load, straight kg 24 850 24 720 24 540 23 660 23 520 23 250 24 000 23 170 22 520 -2 870
at 35° turn kg 22 080 21 950 21 780 21 040 20 900 20 650 21 340 20 580 19 950 -2 640
at full turn kg 21 760 21 640 21 470 20 740 20 600 20 350 21 040 20 280 19 660 -2 610
Breakout force kN 228.2 222.5 214.4 255.2 248.1 231.9 212.0 196.6 190.3 4
A mm 9 240 9 290 9 360 9 290 9 340 9 440 9 580 9 730 9 560 310
E mm 1 440 1 480 1 550 1 480 1 520 1 620 1 730 1 860 1 730 -20
H**) mm 3 190 3 160 3 110 3 160 3 120 3 060 3 030 2 930 2 940 360
L mm 6 290 6 310 6 400 6 390 6 450 6 460 6 420 6 500 6 480 370
M**) mm 1 380 1 410 1 460 1 410 1 440 1 520 1 690 1 800 1 580 -30
N**) mm 2 090 2 110 2 140 2 100 2 120 2 180 2 250 2 300 2 170 270
V mm 3 400 3 400 3 400 3 430 3 430 3 430 3 430 3 430 3 700 -
a1 clearance circle mm 15 560 15 580 15 620 15 610 15 630 15 690 15 770 15 850 16 010 -
Operating weight kg 32 280 32 360 32 470 31 550 31 640 31 680 32 990 33 160 32 040 390
*) With L5 tires Note: This only applies to genuine Volvo attachments.
**) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)

Bucket Selection Chart L220G

The chosen bucket is determined by the density of the material and the expected
5,6 m3
bucket fill factor. The actual bucket volume is often larger than the rated capacity, 5,9 5,6
Rehandling*

due to the features of the TP linkage, including an open bucket design, good 5,9 m3 6,2 5,9
rollback angles in all positions and good bucket filling performance. The example
6,3 m3
represents a standard boom configuration. 6,6 6,3

Example: Sand and gravel. Fill factor ~ 105%. Density 1.6 t/m3. 4,9 m3 5,4 4,9
Result: The 5.2 m3 bucket carries 5.5 m3. For optimum stability always consult
purpose
General

5,2 m3 5,7 5,2

the bucket selection chart.
ISO/SAE 5,6 m3 6,2 5,6

Material bucket Actual 4,5 m3

4,5 4,3
density, volume, volume,
Rock

Material Bucket fill, % t/m3 m3 m3 5,0 m3 5,0 5,3

~ 1.6 4.9 ~ 5.4

material Rock purpose Rehandling* material

~ 110
Light

Earth/Clay ~ 1.5 5.2 ~ 5.7 8,2 m3 8,2

~ 1.4 5.4 ~ 5.9

5,6 m3 5,9 5,6
~ 1.7 4.9 ~ 5.1
Sand/Gravel ~ 105
~ 1.6 5.2 ~ 5.5 5,9 m3 6,2 5,9
~ 1.5 5.4 ~ 5.7
General

~ 1.8 5.6 ~ 5.6

Aggregate ~ 100 4,9 m3 5,4 4,9
~ 1.7 5.9 ~ 5.9
~ 1.6 6.3 ~ 6.3
4,5 m3 4,5 4,3
~ 1.7 4.5 ~ 4.5
Rock ≤100
Light

8,2 m3 8,2

The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.

* Including counterweight
Supplemental Operating Data
Standard boom Long boom
Tires 29.5 R25 L4 29.5 R25 L3 29.5 R25 L5 875/65 R29 L4 29.5 R25 L3 29.5 R25 L5 875/65 R29 L4

Width over tires mm -20 +35 +95 -20 +35 +95

Ground clearance mm ±0 +40 -10 ±0 +40 -20

Tipping load, full turn kg -100 +1 010 +180 -90 +930 +180

Operating weight kg -80 +1 490 +650 -80 +1 500 +650

27
equipment.
STANDARD EQUIPMENT
L150G L180G L220G Low engine oil pressure
Service and maintenance High crankcase pressure
Engine oil remote drain and fill • • • High charge-air temperature
Transmission oil remote drain and fill • • • Engine shutdown to idle in case of malfunction indication: • • •
Lubrication manifolds, ground accessible • • • High transmission oil temperature
Pressure check connections: transmission and hydraulic, • • • Slip in transmission clutches
quick-connects Keypad, background lit • • •
Tool box, lockable • • • Start interlock when gear is engaged • • •
CareTrack • • • Drivetrain
Telematics, 3-Year Subscription • • • Automatic Power Shift • • •
Engine Fully automatic gearshifting, 1-4 • • •
Exhaust after-treatment system • • • PWM-controlled gearshifting • • •
Three stage air cleaner, pre-cleaner, primary and • • • Forward and reverse switch by hydraulic lever console • • •
secondary filter Indicator glass for transmission oil level • • •
Indicator glass for coolant level • • • Differentials: • • •
Preheating of induction air • • • Front, 100% hydraulic diff lock. Rear, conventional.
Fuel pre-filter with water trap • • • OptiShift • • •
Fuel filter • • • Brake system
Crankcase breather oil trap • • • Dual brake circuits • • •
Exhaust heat insulation • • • Dual brake pedals • • •
Exterior radiator air intake protection • • • Secondary brake system • • •
Electrical system Parking brake, electrical-hydraulic • • •
24 V, pre-wired for optional accessories • • • Brake wear indicators • • •
Alternator 24V/ 80A • • • Cab
Battery disconnect switch with removable key • • • ROPS (ISO 3471), FOPS (ISO 3449) • • •
Fuel gauge • • • Single key kit door/start • • •
Hour meter • • • Acoustic inner lining • • •
Electric horn • • • Ashtray • • •
Instrument cluster: • • • Cigarette lighter, 24 V power outlet • • •
Fuel level Lockable door • • •
Transmission temperature Cab heating with fresh air inlet and defroster • • •
Coolant temperature Fresh air inlet with two filters • • •
Instrument lighting Automatic heat control • • •
Lighting: • • • Floor mat • • •
Twin halogen front headlights with high and low beams Dual interior lights • • •
Parking lights Dual interior rear-view mirrors • • •
Double brake and tail lights Dual exterior rear-view mirrors • • •
Turn signals with flashing hazard light function Sliding window, right side • • •
Halogen work lights (2 front and 2 rear) Tinted safety glass • • •
Contronic monitoring system Retractable seatbelt (SAE J386) • • •
Monitoring and logging of machine data • • • Adjustable steering wheel • • •
Contronic display • • • Storage compartment • • •
Fuel consumption • • • Document pocket • • •
Ambient temperature • • • Sun visor • • •
Clock • • • Beverage holder • • •
Test function for warning and indicator lights • • • Windshield washer front and rear • • •
Brake test • • • Windshield wipers front and rear • • •
Test function, sound level at max fan speed • • • Interval function for front and rear wipers • • •
Warning and indicator lights: • • • Hydraulic system
Battery charging
Main valve, double acting 2-spool with hydraulic pilots • • •
Parking brake
Variable displacement axial piston pumps (3) for: • • •
Warning and display message: • • •
1 Working hydraulic system
Regeneration
2 Working hydraulic system,
Engine coolant temperature
Steering- and Brake system
Charge-air temperature
3 Cooling fan and Brake system
Engine oil temperature
Electro-hydraulic servo controls • • •
Engine oil pressure
Transmission oil temperature Electric level lock • • •
Transmission oil pressure Boom kick-out, automatic • • •
Hydraulic oil temperature Bucket positioner, automatic • • •
Brake pressure Double-acting hydraulic cylinders • • •
Parking brake applied Indicator glass for hydraulic oil level • • •
Brake charging Hydraulic oil cooler • • •
Overspeed at direction change External equipment
Axle oil temperature Fenders, front and rear • • •
Steering pressure Viscous cab mounts • • •
Crankcase pressure Rubber engine and transmission mounts • • •
Attachment lock open Easy-to-open engine hood • • •
Level warnings: • • • Frame, joint lock • • •
Fuel level Vandalism lock prepared for • • •
Engine oil level Batteries
Engine coolant level Engine compartment
Transmission oil level Radiator grille
Hydraulic oil level Lifting eyes • • •
Washer fluid level Tie-down eyes • • •
Engine torque reduction in case of malfunction indication: • • •
Tow hitch • • •
High engine coolant temperature
Counterweight, pre-drilled for optional guards • • •
High engine oil temperature

28
OPTIONAL EQUIPMENT
L150G L180G L220G Drivetrain
Service and maintenance Diff lock front 100%, Limited Slip rear • • •
Automatic lubrication system • • • Speed limiter, 20 km/h • • •
Automatic lubrication system for long boom • • • Speed limiter, 30 km/h • • •
Grease nipple guards • • • Speed limiter, 40 km/h •
Oil sampling valve • • • Wheel/axle seal guards • • •
Refill pump for grease to lube system • • • Brake system
Tool kit • • • Oil cooler and filter front & rear axle • • •
Wheel nut wrench kit • • • Stainless steel, brake lines • •
Engine Hydraulic system
Air pre-cleaner, cyclone type • • • Attachment bracket, welded • • •
Air pre-cleaner, cyclone type, two-stage • • • Boom suspension system • • •
Air pre-cleaner, oil-bath type • • • Separate attachment locking, standard boom • • •
Air pre-cleaner, turbo type • • • Separate attachment locking, long boom • • •
Radiator corrosion protection • • • Arctic kit, attachment locking hoses and 3rd hydr. • • •
Engine auto shutdown • • • function
Engine block heater 230V /110V • • • Arctic kit, pilot hoses and brake accum. incl. hydr. oil • • •
ESW, Disabled engine protection • • • Boom cylinder hose and tube guards • • •
Air intake protection (for grill in waste) • • • Boom cylinder hose and tube guards for long boom • • •
Fuel fill strainer • • • Hydraulic fluid, biodegradable, Volvo • • •
Fuel heater • • • Hydraulic fluid, fire-resistant • • •
Hand throttle control • • • Hydraulic fluid, for hot climate • • •
Max. fan speed, hot climate • • • Electro-hydraulic function, 3rd • • •
Radiator, corrosion-protected • • • Electro-hydraulic function, 3rd for long boom • • •
Reversible cooling fan • • • Electro-hydraulic function, 3rd-4th • • •
Reversible cooling fan and axle oil cooler • • • Electro-hydraulic function, 3rd-4th for long boom • • •
Fuel filter, extra • • • Electro-hydraulic servo controls for long boom • • •
Electrical system External equipment
Alternator, 80 A with air filter • • • Cab ladder, rubber-suspended • • •
Anti-theft device • • • Deleted front mudguards • • •
Headlights, assym. left • • • Mudguard widener, front/rear for 80-series tires • • •
License plate holder, lighting • • • Mudguard widener, front/rear for 65-series tires • • •
Rear view camera incl. monitor, colour • • • Fire suppression system • • •
Rear-view mirrors, adjustable, el.heated • • • Mudguards, full cover, rear for 80-series tires • • •
Rear view mirrors, Long arm • • • Mudguards, full cover, rear for 65-series tires • • •
Rear view mirrors, adjustable, el.heated, Long arm • • • Long boom • • •
Reduced function working lights, • • • Protective equipment
reverse gear activated Belly guard front • • •
Reverse alarm • • • Belly guard rear • • •
Reverse warning light, strobe lighting • • • Belly guard rear, oil pan • • •
Shortened headlight support brackets • • • Cover plate, heavy-duty, front frame • • •
Side marker lamps • • Cab roof heavy duty • • •
Rotating beacon • • • Guards for front headlights • • •
Working lights, attachments • • • Guards for radiator grill • • •
Working lights front, high intensity discharge (HID) • • • Guards for tail lights • • •
Working lights front, on cab, dual • • • Windows, side and rear guards • • •
Working lights front, extra • • • Windshield guard • • •
Working lights rear, on cab • • • Corrosion protection, painting of machine • • •
Working lights rear, on cab, dual • • • Corrosion protection, painting of attachment bracket • •
Cab Bucket Teeth protection • •
Anchorage for Operator’s manual • • • Other equipment
Automatic Climate Control, ACC • • • CE-marking • • •
ACC control panel, with Fahrenheit scale • • • Comfort Drive Control (CDC) • • •
Asbestos dust protection filter • • • Counterweight, logging • • •
Cab air pre-cleaner, cyclone type • • • Counter weight, block handling •
Carbon filter • • • Counterweight, re-handling • • •
Cab roof, heavy-duty • • • Counterweight, signal painted, chevrons • • •
Cover plate, under cab • • • Log pusher • • •
Lunch box holder • • • Secondary steering with automatic test function • • •
Armrest, operator’s seat, ISRI, left only • • • Sound decal, EU • • •
Operator’s seat, KAB, air susp, heavy-duty, for CDC • • • Noise reduction kit, exterior • • •
and/or elservo Sign, slow moving vehicle • •
Operator’s seat, ISRI, air susp, heat, high back • • • CareTrack, GSM • • •
Radio installation kit incl. 11 amp 12 volt outlet, left side • • • CareTrack, GSM/Satellite • • •
Radio installation kit incl. 11 amp 12 volt outlet, right side • • • Tires
Radio installation kit incl. 20 amp 12 volt outlet • • • 26.5 R25 • •
Radio with CD-player • • • 29.5 R25 •
Seatbelt, 3”, (width 75 mm) • • • 775/65 R29 • •
Steering wheel knob • • • 875/65 R29 •
Sun blinds, rear windows • • •
Sun blinds, side windows • • •
Timer cab heating • • •
Window, sliding, door • • •
Universal door/ignition key • • •
Front view mirror • • •

29
equipment.
OPTIONAL EQUIPMENT SELECTION OF VOLVO OPTIONAL EQUIPMENT
L150G L180G L220G
Attachments
Buckets:
Rock straight or spade nose • • •
General purpose • • •
Re-handling • • •
Side-dump • Comfort Drive Control (CDC)
Light material • • •
Wear parts:
Bolt-on and weld-on bucket teeth • • •
Segments • • •
Cutting edge in three sections, bolt-on • • •
Fork equipment • • •
Material handling arm • • •
Log grapples • • •

Electro-hydraulic 3rd-4th function

Rear-view camera

Boom Suspension System

Fire Suppression System

Automatic Lubrication System

30
31
volvo construction equipment

Volvo Construction Equipment is different. Our machines are designed, built and supported
in a different way. That difference comes from an engineering heritage of over 175 years.
A heritage of thinking first about the people who actually use the machines. About how to
help them be safer, more comfortable, more productive. About the environment we all share.
The result of that thinking is a growing range of machines and a global support network
dedicated to helping you do more. People around the world are proud to use Volvo.

Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change
specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.

Ref. No 20023724-C English-21

2012.04 WLO
Volvo, Global Marketing