Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Latihan Simulasi Truss

    Uploaded by

    Fiandjafar
    1) The document summarizes a static simulation of a truss structure performed in Solidworks. 2) It includes descriptions of the model, assumptions, material properties, loads, fixtures, mesh information and results of the simulation. 3) The simulation analyzed the stresses and reactions in the truss when a 100kN force was applied and three joints were fixed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Latihan Simulasi Truss

    Uploaded by

    Fiandjafar
    45 views12 pages
    1) The document summarizes a static simulation of a truss structure performed in Solidworks. 2) It includes descriptions of the model, assumptions, material properties, loads, fixtures, mesh information and results of the simulation. 3) The simulation analyzed the stresses and reactions in the truss when a 100kN force was applied and three joints were fixed.

    Original Description:

    report hasil simulasi

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document summarizes a static simulation of a truss structure performed in Solidworks. 2) It includes descriptions of the model, assumptions, material properties, loads, fixtures, mesh information and results of the simulation. 3) The simulation analyzed the stresses and reactions in the truss when a 100kN force was applied and three joints were fixed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    45 views12 pages

    Latihan Simulasi Truss

    Uploaded by

    Fiandjafar
    1) The document summarizes a static simulation of a truss structure performed in Solidworks. 2) It includes descriptions of the model, assumptions, material properties, loads, fixtures, mesh information and results of the simulation. 3) The simulation analyzed the stresses and reactions in the truss when a 100kN force was applied and three joints were fixed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 12

    Simulation of truss1

    Date: Wednesday, November 29, 2017


    Designer: Solidworks
    Study name:Static 1
    Analysis type:Static

    Table of Contents
    Description ............................................ 1
    Assumptions .......................................... 2
    Model Information ................................... 2
    Study Properties ..................................... 4
    Units ................................................... 4
    Material Properties .................................. 5
    Loads and Fixtures................................... 5
    Connector Definitions ............................... 6
    Description
    Contact Information ................................. 6
    latihan simulasi truss mata kuliah teori dan aplikas elemen
    hingga Mesh information .................................... 7
    Sensor Details ........................................ 8
    Resultant Forces ..................................... 8
    Beams .................................................. 9
    Study Results ....................................... 10
    Conclusion .......................................... 12

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 1


    Assumptions

    Model Information

    Model name: truss1


    Current Configuration: Default<As Machined>
    <L_MdInf_SldBd_Nm/> <L_MdIn_SldBd_Tr/> <L_MdInf_SldBd_VolProp/> <L_MdIn_SldBd_DtMd/>
    <L_MdInf_ShlBd_Nm/> <L_MdIn_ShlBd_Fr/> <L_MdInf_ShlBd_VolProp/> <L_MdIn_ShlBd_DtMd/>
    <L_MdInf_CpBd_Nm/> <L_MdInf_CompBd_Props/>
    Beam Bodies:
    Document Path/Date
    <L_MdInf_BmBd_Nm/> Formulation Properties
    Modified

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 2


    Beam-1(Structural
    Member5) Section Standard-
    iso/materifemtkapal/0.20.1
    Section Area: 20000in^2
    Length:3000mm C:\Users\Dell\Videos\truss
    Beam – Uniform C/S Volume:0.06m^3 1.SLDPRT
    Mass Density:7700kg/m^3 Nov 29 20:11:30 2017
    Mass:462kg
    Weight:4527.6N

    Beam-2(Structural
    Member4) Section Standard-
    iso/materifemtkapal/0.3x0.1
    Section Area: 30000in^2
    Length:4242.64mm C:\Users\Dell\Videos\truss
    Beam – Uniform C/S Volume:0.127279m^3 1.SLDPRT
    Mass Density:7700kg/m^3 Nov 29 20:11:30 2017
    Mass:980.05kg
    Weight:9604.49N

    Beam-3(Structural
    Member3) Section Standard-
    iso/materifemtkapal/0.15x0.1
    Section Area: 15000in^2
    Length:3464.08mm C:\Users\Dell\Videos\truss
    Beam – Uniform C/S Volume:0.0519611m^3 1.SLDPRT
    Mass Density:7700kg/m^3 Nov 29 20:11:30 2017
    Mass:400.101kg
    Weight:3920.99N

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 3


    Study Properties
    Study name Static 1
    Analysis type Static
    Mesh type Beam Mesh
    Solver type Direct sparse solver
    Inplane Effect: Off
    Soft Spring: Off
    Inertial Relief: Off
    Incompatible bonding options Automatic
    Large displacement Off
    Compute free body forces On
    Result folder SOLIDWORKS document (C:\Users\Dell\Videos)

    Units
    Unit system: SI (MKS)
    Length/Displacement mm
    Temperature Kelvin
    Angular velocity Rad/sec
    Pressure/Stress N/m^2

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 4


    Material Properties
    Model Reference Properties Components
    Name: Alloy Steel SolidBody 1(Structural
    Model type: Linear Elastic Isotropic Member5)(truss1),
    Default failure Max von Mises Stress SolidBody 2(Structural
    criterion: Member4)(truss1),
    Yield strength: 6.20422e+008 N/m^2 SolidBody 3(Structural
    Tensile strength: 7.23826e+008 N/m^2 Member3)(truss1)
    Elastic modulus: 2.1e+011 N/m^2
    Poisson's ratio: 0.28
    Mass density: 7700 kg/m^3
    Shear modulus: 7.9e+010 N/m^2
    Thermal expansion 1.3e-005 /Kelvin
    coefficient:
    Curve Data:N/A

    Loads and Fixtures


    Fixture name Fixture Image Fixture Details
    Entities: 3 Joint(s)
    Type: Fixed Geometry

    Fixed-1

    Load name Load Image Load Details


    Entities: 1 plane(s), 1 Joint(s)
    Reference: Front Plane
    Type: Apply force
    Values: 100000, -200000, --- N
    Moments: ---, ---, --- N.m
    Force-1

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 5


    Connector Definitions
    No Data

    Contact Information
    No Data

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 6


    Mesh information
    Mesh type Beam Mesh

    Mesh information - Details


    Total Nodes 176
    Total Elements 172
    Time to complete mesh(hh;mm;ss): 00:00:00
    Computer name: DELL-PC

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 7


    Sensor Details
    No Data

    Resultant Forces
    Reaction forces
    Selection set Units Sum X Sum Y Sum Z Resultant
    Entire Model N -100000 200000 2.71051e-020 223607

    Reaction Moments
    Selection set Units Sum X Sum Y Sum Z Resultant
    Entire Model N.m -4.38065e-013 -2.58595e-012 2264.69 2264.69

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 8


    Beams
    Beam Forces
    Beam
    Joints Axial(N) Shear1(N) Shear2(N) Moment1(N.m) Moment2(N.m) Torque(N.m)
    Name
    -1.45114e-
    Beam- 1 14668.4 642.359 -1.18388e-012 -1265.35 6.90422e-013
    013
    1(Structural
    1.45114e-
    Member5) 2 -14668.4 -642.359 7.48539e-013 -661.733 -6.90422e-013
    013
    5.94044e-
    Beam- 1 -222796 14.5052 -6.14528e-014 -689.711 2.63055e-013
    013
    2(Structural
    6.38497e-
    Member4) 2 222796 -14.2983 -2.78024e-012 750.813 -4.80248e-013
    011
    -4.30643e-
    Beam- 1 -83457.2 114.959 2.44698e-013 -89.0799 6.14701e-013
    012
    3(Structural
    -4.48932e-
    Member3) 2 83457.2 -115.193 1.10222e-012 -309.628 -6.09911e-013
    013

    Beam Stresses
    Bending Bending Torsional Worst
    Beam Name Joints Axial(N/m^2)
    Dir1(N/m^2) Dir2(N/m^2) (N/m^2) Case(N/m^2)
    1.68656e-
    Beam- 1 733422 -3.55165e-009 1.89802e+006 2.63144e+006
    009
    1(Structural
    -1.68656e-
    Member5) 2 733422 -2.24562e-009 -992599 1.72602e+006
    009
    5.26028e-
    Beam- 1 7.42653e+006 1.22906e-010 -459808 7.88634e+006
    010
    2(Structural
    -9.60345e-
    Member4) 2 7.42653e+006 -5.56048e-009 -500542 7.92707e+006
    010
    1.88558e-
    Beam- 1 -5.56382e+006 9.78792e-010 237546 5.80136e+006
    009
    3(Structural
    -1.87089e-
    Member3) 2 -5.56382e+006 -4.40889e-009 -825676 6.38949e+006
    009

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 9


    Study Results

    Name Type Min Max


    Stress1 TXY: Shear in Y Dir. on YZ 764583 N/m^2 7.92707e+006 N/m^2
    Plane Element: 17 Element: 116

    truss1-Static 1-Stress-Stress1

    Name Type Min Max


    Displacement1 URES: Resultant Displacement 0 mm 0.201981 mm
    Node: 49 Node: 1

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 10


    truss1-Static 1-Displacement-Displacement1

    Name Type Min Max


    Factor of Safety1 Automatic 78.2662 754.126
    Node: 1 Node: 17

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 11


    truss1-Static 1-Factor of Safety-Factor of Safety1

    Conclusion

    Analyzed with SOLIDWORKS Simulation <Label_Simulationof/><Model_Name/> 12

    You might also like