B&C Catalogue 2017

®
With over 70 years of industry experience,

B&C Speakers has designed and built thousands
of unique transducers. Each year, our sales and
engineering teams work together to develop a
comprehensive catalogue. While this catalogue
reflects the large majority of our technologies, it is
primarily designed to feature more recent additions
to the product range. Please refer to our web site
(http://www.bcspeakers.com) to get the latest product
updates throughout the year. You will also find more
detailed specifications and physical dimensions for all
standard models. Our web site is by far our most up-to-
date and complete product information resource.
Nevertheless, they comment

POWER HANDLING specify a “Continuous Program
little on the working limits
B&C’s specified Nominal Power Power Handling”, double of the
of loudspeakers in the large
Handling is measured according Nominal Power Handling, as a
signal domain. These limits are
to the AES2-1984 standard. The recommended amplifier power in
customarily indicated by Xmax,
transducer under test is driven order to fully exploit the thermal
the maximum linear excursion.
for a two-hour period with a pink and mechanical capabilities
In a typical measurement,
noise signal having a crest factor of the transducer without any
this value corresponds to
of 2 (or 6 dB), and filtered to the clipping in the amplifier stage.
a maximum of 10% total
working range of the transducer On the contrary, if the amplifier
harmonic distortion (THD) with
itself. For instance, a 50-500 Hz is pushed to its limits and shows
a sinusoidal signal (though
range is typical for woofer testing. frequent saturation, its power
most manufacturers, including
Cone loudspeakers are tested in specification should be less
B&C, now typically provide
free air. Compression drivers are than the rated Nominal Power data for Linear Mathematical
coupled to their recommended Handling of the loudspeaker. Xmax, not measured Xmax).
horn. Power is calculated using Recent research shows that this
the RMS value of applied EXCURSION LIMITS method can yield ambiguous
voltage – averaged over the Evolution is a process that results, and even different
test period – and the minimum affects not only products, but also numerical values for the same
value of electrical impedance their technical specifications. loudspeaker. The main limit of
within the working range of the Constant advances in research this measurement is that it looks
loudspeaker. After the test, the provide more precise methods at the output signal instead
transducer must be in working to measure the performance of the physical features of the
order, without permanent impact of loudspeakers and describe driver itself. On the contrary, the
on its technical performance. their features. Thiele-Small most up-to-date instruments for
Due to the transient character of parameters have become distortion analysis can measure
most musical programs, whose the universal language for the variations in loudspeaker
crest factor is commonly 12 describing loudspeaker behaviour parameters when they are fed
dB or more, it is customary to in the small signal domain. with high-level signals. In this way,
an excursion limit can be fixed impedance fall within established increased mechanical stress,
beyond which the parameter’s tolerance windows. Each cone and increased distortion. These
variation becomes excessive. The loudspeaker is additionally are due to the loudspeaker
“Xvar” value reported in our data tested using a low frequency, working in a region where
(generally after the traditional high-voltage acoustical sweep nonlinearities are larger, and
“Xmax” value) is measured this to check for vibrations or noises thermal dissipation and power
way. Beyond this excursion limit, (rub and buzz). Each product handling are lower. Generally
the loudspeaker force factor is guaranteed and supported speaking, a large amount of DC
(Bl), or the total suspension with a 3-year limited warranty. offset leads to poor performance
compliance (Cms), or both, and shortened loudspeaker life.
drops to less than 50% of their DC OFFSET
small signal value, producing A known issue of the dynamic All B&C loudspeakers are
high distortion levels and strong loudspeaker is the instability of designed with DC offset reduction
variations from small signal the average working position for in mind, especially our large
behaviour. This new technique frequencies above the resonance excursion subwoofers. Our
yields different results from the frequency. In this range, because motors are designed to have a
standard Xmax measurement. of the phase relationship between large plateau around the rest
B&C Speakers believes that this force and position, the variations position, both through magnet
added information gives a more in force factor (Bl) vs position assembly optimization and voice
accurate and reliable description drive the moving assembly coil design. Reducing the slope
of loudspeaker capabilities in away from the Bl maximum. of the Bl curve, especially in
actual operating conditions. Intuitively, the loudspeaker the central region, will reduce
tends to “slide” down the instability and therefore the
QUALITY CONTROL slopes of the Bl(x) curve. This amount of DC offset. A special
Every product from B&C Speakers is referred to as DC offset. winding technique has been
is 100% quality tested before adopted in the most critical
it is packaged and shipped. We Since the rest position is the cases. Our suspensions are also
perform a set of measurements optimal average working point, designed to counteract DC offset
on every component to ensure DC offset leads to several before it degrades performance.
that its frequency response, undesirable consequences:
harmonic distortion, and electrical reduced excursion capabilities,
DC component XDC Force factor Bl (x)

(01:05:40)
stable
2
25
1
-0 20
unstable
-1
Bl [N/A]
15
x [mm]
-2
-3 10
-4
5
-5
-6 0
3*101 4*101 5*101 6*101 7*101 8*10’ 9*10’ 102 -15 -10 -5 0 5 10 15
<<coiloin Xd[mm] coiloout>>
Frequency fl [Hz]
B&C Speakers reserves the right to change the specifications of our products without notice.
FE
LF
DRIV
ERS
B&C Speakers is a Our engineers have

major supplier to the optimized each design
pro audio market in with Finite Element
midrange, woofer and Analysis (FEA) software
subwoofer cone drivers. to ensure each speaker
We have made a strong operates to its fullest
commitment to provide a potential time and time
well-balanced line of LF again.
drivers that range in size
from 2” to 21”.
From nightclubs, to
stadiums, to concert
In recent years we have halls around the world,
made refinements to our our speakers are chosen
cone geometry, magnet based on their reliability,
assemblies and speaker consistency and most of
production lines to create all for their outstanding
a dynamic and powerful sound quality and
lineup of products. The performance.
models that are included
in this catalog all have:
• increased sensitivity
• increased power
handling capacity
• increased excursion
capabilities
• lower distortion levels
bcspeakers.com 4
FE
® LF
DRIV
ERS
5FG44
FE WOOFER
200 W 44 mm (1.7 in)

continuous program aluminium voice coil
power capacity
92 dB 63 - 6000 Hz
sensitivity response
SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM
Hz Hz
SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

Nominal Diameter 127 mm (5 in) Fs 63 Hz Overall Diameter 135 mm (5.31 in)
Nominal Impedance 8Ω Re 5.8 Ω Bolt Circle Diameter 142 mm (5.6 in)
Minimum Impedance 6.5 Ω Qes 0.3 Baffle Cutout Diameter 122 mm (4.8 in)
Qms 10
Power Handling Depth 77 mm (3 in)
Qts 0.27
Nominal (AES)1 100 W Flange and Gasket Thickness 9 mm (0.35 in)
Vas 6.3 dm3 (0.22 ft3)
Continuous Program2 200 W Sd 95 cm2 (14.7 in2) Air volume occupied by driver 0.5 dm3 (0.02 ft3)
Sensitivity (1W/1m)3 92 dB η0 0.55% Net Weight 1.6 kg (3.52 lb)
Frequency Range 63 - 6000 Hz X max ± 3 mm Shipping Weight 1.85 kg (4.1 lb)
Voice Coil Diameter 44 mm (1.7 in) X var ± 5 mm Shipping Box 210x210x125 mm
Winding Material Copper Mms 12.4 g (8.27x8.27x4.92 in)
Former Material Kapton Bl 10 T·m
Winding Depth 9 mm (0.35 in) Le 0.8 mH Service kit RCK005FG44-8
Magnetic Gap Depth 6 mm (0.25 in) EBP 210 Hz
Flux Density 1.1 T
Magnet Material Ferrite Ring
Waterproof Cone Treatment Front Side
1
Two hour test made with continuous 2
Power on Continuous Program is Average SPL from 200 to 4000 Hz.
pink noise signal (6 dB crest factor) defined as 3 dB greater than the 4
Thiele-Small parameters are
within the specified range Fs-10Fs. Nominal rating. measured after a high level 20 Hz
Power calculated on rated minimum 3
Applied RMS Voltage is set to 2.83 V sine wave preconditioning test.
impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
bcspeakers.com 5
FE
® LF
DRIV
ERS
6MD38
FE MIDRANGE
240 W 38 mm (1.5 in)

power capacity
96 dB 150 - 6000 Hz
Hz Hz

Nominal Diameter 170 mm (6.5 in) Fs 130 Hz Overall Diameter 187 mm (7.4 in)
Qms 3.7
Power Handling Depth 82 mm (3.2 in)
Qts 0.44
Vas 3 dm3 (0.1 ft3)
Voice Coil Diameter 38 mm (1.5 in) X var ± 4.5 mm Shipping Box 210x210x125 mm
Winding Material Aluminium Mms 12 g (8.27x8.27x4.92 in)
Former Material Glass Fibre Bl 10.5 T·m
Winding Depth 9 mm (0.35 in) Le 0.25 mH Service kit RCK006MD38-8

Flux Density 1.4 T
1
Power on Continuous Program Average SPL from 500 to 6000 Hz.
pink noise signal (6 dB crest factor) is defined as 3 dB greater 4
within the specified range Fs-10Fs. than the Nominal rating. measured after a high level 20 Hz
Applied RMS Voltage is set to 2.83 sine wave preconditioning test.
Also available in 16 Ω, data upon request impedance. Loudspeaker in free air. V for 8 ohms Nominal Impedance.
bcspeakers.com 6
FE
® LF
DRIV
ERS
6PS38
FE WOOFER
300 W 38 mm (1.5 in)

power capacity
94 dB 70 - 5000 Hz
Hz Hz

Minimum Impedance 6.6 Ω Qes 0.31 Baffle Cutout Diameter 145.0 mm (5.71 in)
Qms 11.7
Qts 0.3
Vas 8 dm3 (0.28 ft3)
Sensitivity (1W/1m)3 94 dB η0 1% Net Weight 2.2 kg (4.85 lb)
Winding Depth 12 mm (0.49 in) Le 0.6 mH Service kit RCK06PS388
Flux Density 1.4 T
1
Power on Continuous Program is Thiele-Small parameters are
4
pink noise signal (6 dB crest factor) defined as 3 dB greater than the measured after a high level 20 Hz
within the specified range Fs-10Fs. Nominal rating. sine wave preconditioning test.
Applied RMS Voltage is set to 2.83 V
Also available in 4 and 16 Ω, data upon request
bcspeakers.com 7
FE
® LF
DRIV
ERS
6PS44
FE WOOFER
400 W 44 mm (1.7 in)

continuous program copper voice coil
power capacity
93 dB 70 - 5000 Hz
Hz Hz

Qms 12.5
Qts 0.33
Vas 7 dm3 (0.25 ft3)
Frequency Range 70 - 5000 Hz X max ± 4.5 mm Shipping Weight 2.75 kg (6.06 lb)
Winding Material Copper Mms 18 g (8.27x8.27x4.92 in)
Former Material Glass Fibre Bl 11 T·m
Winding Depth 12 mm (0.49 in) Le 0.7 mH Service kit RCK06PS44-8

Flux Density 1.4 T
1
Power on Continuous Program is 4
Thiele-Small parameters are measured
pink noise signal (6 dB crest factor) defined as 3 dB greater than the after a high level 20 Hz sine wave
within the specified range Fs-10Fs. Nominal rating. preconditioning test.
Also available in 16 Ω, data upon request
bcspeakers.com 8
FE
® LF
DRIV
ERS
8FW51
FE WOOFER
400 W 51 mm (2 in) Shorting copper cap

continuous program copper voice coil for extended
power capacity HF response
Ventilated voice
coil gap for reduced
97 dB 70 - 5000 Hz power compression
Hz Hz

Power Handling Qms 9.3 Depth 100 mm (3.94 in)
Nominal (AES)1 200 W Qts 0.21 Flange and Gasket Thickness 11 mm (0.4 in)
Continuous Program2 400 W Vas 12 dm3 (0.42 ft3) Air volume occupied by driver 1.5 dm3 (0.05 ft3)
Sensitivity (1W/1m)3 97 dB Sd 220 cm2 (34.1 in2) Net Weight 5.3 kg (11.6 lb)
Frequency Range 70 - 5000 Hz η0 2.1 % Shipping Weight 5.6 kg (12.3 lb)

Voice Coil Diameter 51 mm (2 in) X max ± 6 mm Shipping Box 255x255x150 mm
Winding Material Copper X var ± 5 mm (10.04x10.04x5.90 in)
Former Material Kapton Mms 27 g
Winding Depth 16.5 mm (0.65 in) Bl 17.7 T·m Service kit RCK008FW51-8
Magnetic Gap Depth 10 mm (0.4 in) Le 0.56 mH
Flux Density 1.35 T EPB 352 Hz
Waterproof Cone Treatment Both Sides
1
Also available in 4 Ω and 16 Ω, data upon request impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
bcspeakers.com 9
FE
® LF
DRIV
ERS
8FG64
FE WOOFER
600 W 64 mm (2.5 in) Aluminium

continuous program copper voice coil demodulating ring
power capacity for very low distortion
92 dB 50 - 3000 Hz
Hz Hz

Qms 10.1
Power Handling Depth 100 mm (3.94)
Qts 0.31
Vas 15 dm3 (0.53 ft3)
Winding Depth 19 mm (0.75 in) Le 1.7 mH Service kit RCK008FG64-8

Flux Density 0.9 T
Waterproof Cone Treatment Front Side 1

Also available in 16 Ω, data upon request impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
bcspeakers.com 10
FE
® LF
DRIV
ERS
10MD26
FE MID-BASS
700 W 76 mm (3 in)
continuous program aluminium
power capacity voice coil
100 dB 80 - 4000 Hz
Hz Hz

Voice Coil Diameter 76 mm (3 in) X max ± 1.5 mm Shipping Box 295x314x175 mm
Winding Material Aluminium X var ± 4.5 mm (11.61x12.36x6.89 in)
Former Material Glass Fibre Mms 31 g
Winding Depth 11 mm (0.43 in) Bl 19.6 T·m Service kit RCK010MD26-8
Flux Density 1.45 T EPB 345 Hz
Waterproof Cone Treatment None
1
within the specified range Fs-10Fs. Nominal rating. after a high level 20 Hz sine wave
Applied RMS Voltage is set to 2.83 V preconditioning test.

bcspeakers.com 11
FE
® LF
DRIV
ERS
10FW64
FE WOOFER
500 W 64 mm (2.5 in)

power capacity
98 dB 65 - 3000 Hz
Hz Hz

Nominal Impedance 8Ω Re 5Ω Bolt Circle Diameter 245 mm (9.6 in)
Sensitivity (1W/1m)3 98 dB Sd 320 cm2 (50 in2) Net Weight 5.9 kg (13 lb)
Voice Coil Diameter 64 mm (2.5 in) X max ± 5 mm Shipping Box 295x314x175 mm
Winding Depth 14 mm (0.55 in) Bl 16.4 T·m Service kit RCK010FW64-8
Flux Density 1.25 T EBP 252 Hz
pink noise signal (6 dB crest factor) defined as 3 dB greater than the Thiele-Small parameters are
4
bcspeakers.com 12
FE
® LF
DRIV
ERS
12MH32
FE MID-BASS
800 W 76 mm (3 in) Aluminium

101 dB 50 - 3000 Hz
Hz Hz

Winding Depth 14 mm (0.55 in) Bl 22.3 T·m Service kit RCK012MH32-8
1
bcspeakers.com 13
FE
® LF
DRIV
ERS
12FW64
FE WOOFER
500 W 64 mm (2.5 in)

power capacity
98 dB 55 - 3000 Hz
Hz Hz

Qms 3.5
Qts 0.29
Vas 64 dm3 (2.26 ft3)
Continuous Program2 500 W Sd 522 cm2 (80.9 in2) Air volume occupied by driver 3 dm3 (0.10 ft3)
Sensitivity (1W/1m)3 98 dB η0 3.6 % Net Weight 5.6 kg (12.3 lb)
Winding Depth 14 mm (0.55 in) Le 1 mH Service kit RCK12FW64-8
Flux Density 1.3 T
bcspeakers.com 14
FE
® LF
DRIV
ERS
12FW76
FE WOOFER

100 dB 55 - 3000 Hz
Hz Hz

Qms 3.8
Qts 0.18
Nominal (AES)¹ 500 W Flange and Gasket Thickness 12 mm (0.47 in)
Vas 45 dm3 (1.6 ft3)
Continuous program² 1000 W Sd 522 cm2 (80.9 in2) Air volume occupied by driver 3 dm3 (0.10 ft3)
Voice Coil Diameter 76 mm (3 in) X var ± 10 mm Shipping Box 360x360x200 mm
Winding Depth 19 mm (0.75 in) Le 1.4 mH
Magnetic Gap Depth 11 mm (0.43 in) EBP 300 Hz Service kit RCK012FW76-8
Flux Density 1.35 T
1

Also available in 4 and 16 Ω, data upon request impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
bcspeakers.com 15
FE
® LF
DRIV
ERS
12PLB100
FE WOOFER

continuous program aluminium voice coil demodulating ring
Ventilated voice
97 dB 50 - 2500 Hz coil gap for reduced
sensitivity response power compression
Hz Hz

Minimum Impedance 6Ω Qes 0.38 Baffle Cutout Diameter 282 mm (11.1 in)
Qms 9.2
Qts 0.37
(50-500 Hz) Flange and Gasket Thickness 12 mm (0.47 in)
Vas 47 dm3 (1.6 ft3)
Nominal (AES)¹ 600 W Sd 531 cm2 (82 in2) Air volume occupied by driver 3.5 dm3 (0.12 ft3)
Continuous program² 1200 W η0 1.7 % Net Weight 9.3 kg (20.5 lb)
Sensitivity (1W/1m)3 97 dB X max ± 9 mm Shipping Weight 10.2 kg (22.49 lb)
Frequency Range 50 - 2500 Hz X var ± 7 mm Shipping Box 360x360x200 mm
Voice Coil Diameter 100 mm (4 in) Mms 77 g (14.17x14.17x7.87 in)
Winding Material Aluminium Bl 18.4 T·m
Former Material Glass Fibre Le 1.6 mH Service kit RCK12PLB100-8
Winding Depth 23 mm (0.91 in) EBP 131 Hz
Magnetic Gap Depth 10 mm (0.39 in)
Flux Density 1.0 T
1
bcspeakers.com 16
FE
® LF
DRIV
ERS
12PS100
FE SUBWOOFER
1400 W 100 mm (4 in) Double silicone

continuous program copper voice coil spider with optimized
power capacity compliance
93 dB 45 - 1000 Hz
Hz Hz

Qms 3.9
Qts 0.27
Vas 47 dm3 (1.6 ft3)
Winding Depth 21 mm (0.83 in) Le 2 mH Service kit RCK12PS100-8
Flux Density 1.05 T
1
bcspeakers.com 17
FE
® LF
DRIV
ERS
12TBX100
FE SUBWOOFER
Aluminium
demodulating ring
for very low distortion
2000 W 100 mm (4 in)
continuous program copper voice coil Double silicone
power capacity spider with optimized
compliance
95 dB 45 - 1000 Hz Ventilated voice

sensitivity response coil gap for reduced
power compression
Hz Hz

Nominal Diameter 320 mm (12.0 in) Fs 42 Hz Overall Diameter 319 mm (12.5in)
Continuous Program2 2000 W Vas 37.5 dm3 (1.3 ft3) Air volume occupied by driver 4.2 dm3 (0.15 ft3)
Sensitivity (1W/1m)3 95 dB Sd 531 cm2 (82.3 in2) Net Weight 11.8 kg (26 lb)
Winding Depth 25 mm (1 in) Bl 25.5 T·m
Magnetic Gap Depth 12 mm (1/2 in) Le 1.6 mH Service kit RCK12TBX100-8
1
Also available in 4 Ω, data upon request Power calculated on rated minimum 3
bcspeakers.com 18
FE
® LF
DRIV
ERS
15FW76
FE WOOFER

Double silicone
100 dB 40 - 2000 Hz spider and ventilated
sensitivity response voice coil gap
Hz Hz

Nominal (AES)¹ 500 W Qts 0.21 Flange and Gasket Thickness 14 mm (0.55 in)
Continuous program² 1000 W Vas 138 dm3 (4.9 ft3) Air volume occupied by driver 5.5 dm3 (0.19 ft3)
Winding Depth 19 mm (0.75 in) Bl 26.2 T·m Service kit RCK15FW76-8
1
bcspeakers.com 19
FE
® LF
DRIV
ERS
15PLB76
FE WOOFER
800 W 76 mm (3 in)
power capacity
100 dB 40 - 2000 Hz
Hz Hz

Nominal Diameter 380 mm (15 in) Fs 42 Hz Overall Diameter 393 mm (15.5in)
Frequency Range 40 - 2000 Hz η0 4.5 % Shipping Weight 9.8 kg (21.61 in)
Winding Depth 16 mm (0.62 in) Bl 22.1 T·m Service kit RCK15PBL76-8
1
bcspeakers.com 20
FE
® LF
DRIV
ERS
15PS100
FE SUBWOOFER

95.0 dB 35 - 1500 Hz
Hz Hz

Sensitivity (1W/1m)3 95.0 dB Sd 855.0 cm2 (132.5 in2) Net Weight 9.8 kg (21.5 lb)
Winding Material Copper X var ± 6.5 mm (16.73x16.73x8.86 in)
Winding Depth 21 mm (0.83 in) Bl 21.2 T·m Service kit RCK15PS100-8
Magnet Material Ferrite
Waterproof Cone Treatment Both Sides 1
bcspeakers.com 21
FE
® LF
DRIV
ERS
15PZB100
FE SUBWOOFER

97 dB 40 - 2000 Hz
Hz Hz

Continuous Program2 1400 W Vas 110 dm3 (3,8 ft3) Air volume occupied by driver 5.2 dm3 (0.18 ft3)
Winding Depth 21 mm (0.83 in) Bl 25.8 T·m Service kit RCK15PZB100-8
Magnetic Gap Depth 9 mm (0.35 in) Le 2 mH
bcspeakers.com 22
FE
® LF
DRIV
ERS
15RBX100
FE SUBWOOFER

demodulating ring
Double silicone spider

95 dB 40 - 3000 Hz with optimized
sensitivity response compliance
Hz Hz

Frequency Range 40 - 3000 Hz η0 2.0 % Shipping Weight 13 kg (28.66 lb)
Voice Coil Diameter 100 mm (4 in) X max ± 9 mm Shipping Box 425x4 25x224 mm
Winding Depth 25 mm (1 in) Bl 24.0 T·m Service kit RCK15RBX100-8
bcspeakers.com 23
FE
® LF
DRIV
ERS
15TBX100
FE SUBWOOFER
Double silicone
spider with optimized
2000 W 100 mm (4 in) compliance
power capacity Ventilated voice
power compression
96 dB 35 - 1500 Hz Aluminium
sensitivity response demodulating ring for
very low distortion
Hz Hz

Nominal Diameter 380 mm (15 in) Fs 35Hz Overall Diameter 393 mm (15.5 in)
Winding Depth 25 mm (1 in) Bl 25.5 T·m Service kit RCK15TBX100-8
Magnetic Gap Depth 12 mm (1/2in) Le 1.6 mH
bcspeakers.com 24
FE
® LF
DRIV
ERS
15TBW100
FE SUBWOOFER
Double silicone
compliance
Ventilated voice
power compression
continuous program split winding demodulating ring for
power capacity copper voice coil very low distortion
96 dB 40 - 1500 Hz 57 mm
sensitivity response peak-to-peak excursion
before damage
Hz Hz

Continuous Program2 3000 W Vas 96 dm3 (3.39 ft3) Air volume occupied by driver 6 dm3 (0.21 ft3)
Winding Depth 31 mm (1.22 in) Bl 26.4 T·m Service kit RCK15TBW100-8
bcspeakers.com 25
FE
® LF
DRIV
ERS
18PS100
FE SUBWOOFER

95.5 dB 30 - 1000 Hz
Hz Hz

Nominal Diameter 460 mm (18 in) Fs 30 Hz Overall Diameter 460 mm (18 in)
Qms 4.6
Qts 0.39
Nominal (AES)1 700 W Flange and Gasket Thickness 16 mm (5/8 in)
Vas 245 dm3 (8.6 ft3)
Sensitivity (1W/1m)3 95.5 dB η0 1.6 % Net Weight 10.5 kg (23.1 lb)
Winding Depth 21 mm (0.83 in) Le 2.1 mH Service kit RCK18PS100-8
Flux Density 1.05 T
bcspeakers.com 26
FE
® LF
DRIV
ERS
18PZB100
FE SUBWOOFER

continuous program split winding spider with optimized
power capacity copper voice coil compliance
97 dB 40 - 2000 Hz
Hz Hz

Winding Depth 21 mm (0.83 in) Bl 26 T·m
Magnetic Gap Depth 8 mm (0.31 in) Le 2.1 mH Service kit RCK18PZB100-8
Waterproof Cone Treatment Both Sides 1 Two hour test made with continuous 2
Power on Continuous Program is Average SPL from 200 to 2000Hz.
Thiele-Small parameters are mea-
within the specified range Fs-10Fs. Nominal rating. sured after a high level 20 Hz sine
Applied RMS Voltage is set to 2.83 V wave preconditioning test.
bcspeakers.com 27
FE
® LF
DRIV
ERS
18RBX100
FE SUBWOOFER

Double silicone
97 dB 35 - 1000 Hz spider with
optimized
compliance
Hz Hz

Qms 7.3
Qts 0.34
Vas 220 dm3 (7.77 ft3)
Magnetic Gap Depth 11 mm (0.43 in) EBP 111 Hz Service kit RCK18RBX100-8
Flux Density 1.1 T
bcspeakers.com 28
FE
® LF
DRIV
ERS
18TBX100
FE SUBWOOFER
Double silicone
2400 W 100 mm (4 in) compliance
Ventilated voice
power capacity
power compression
sensitivity response demodulating ring
Hz Hz

Qms 7.2
Qts 0.35
Nominal (AES)1 1200 W Flange and Gasket Thickness 16 mm (5/8 in)
Vas 212 dm3 (7.5 ft3)
Sensitivity (1W/1m)3 97 dB η0 2.2 % Net Weight 13 kg (28.6 lb)
Winding Depth 25 mm (1 in) Le 1.6 mH Service kit RCK18TBX100-8

Flux Density 1.1 T
bcspeakers.com 29
FE
® LF
DRIV
ERS
18TBW100
FE SUBWOOFER
Double silicone
compliance
Ventilated voice
power compression
continuous program split winding demodulating ring for
power capacity copper voice coil very low distortion
96 dB 35 - 1000 Hz 57 mm
before damage
Hz Hz

Power Handling Qms 8 Depth 241 mm (9.5 in)
Frequency Range 35 - 1000 Hz η0 1.76 % Shipping Weight 16.8 kg (37 lb)
Winding Depth 31 mm (1.22 in) Bl 26.4 T·m Service kit RCK18TBW100-8
Two hour test made with continuous impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
pink noise signal (6 dB crest factor) 2
Power on Continuous Program is Average SPL from 200 to 1000Hz.
within the specified range Fs-10Fs. defined as 3 dB greater than the 4
Power calculated on rated minimum Nominal rating. after a high level 20 Hz sine wave
Also available in 4 Ω, data upon request impedance. Loudspeaker in free air. 3
bcspeakers.com 30
ND
LF
DRIV
ERS
B&C is a leader in designed for high output The NBX and NW series
the development of MidBass applications, feature a very high-
neodymium woofers especially in compact energy neodymium
for the professional enclosures. The more magnet assembly.
audio market. Our recent MBX parameters A specially designed
HPL series, launched offer an ideal solution double silicone spider
in 1998, was one of for two way systems, but offers excellent
the first neodymium are also an excellent excursion control.
loudspeakers available. choice for multi-driver
We have since expanded applications, such as
our use of neodymium to Line Array enclosures.
cover our entire range. The MBX series
In addition to having combines high sensitivity, The SW series is the
optimized frequency linearity and excellent next generation of
response curves, our power handling. Low neodymium magnet
newer woofers feature moving mass enables subwoofers. We focused
baskets that have been a precise and fast our energy on long, large
designed to maximize transient attack. Other diameter voice coils (4”
power handling, features include a to 6”) for greater power
excursion, and heat dedicated demodulation handling and low power
dissipation. ring, ventilated voice compression. In addition,
coil gap, and new we have developed new
hydrophobic cone suspension systems to
surface, offering extreme offer superb linearity
protection without with low DC offset,
The NDL series works increased moving mass. and industry-leading
with an inside slug durability. The most
high-energy neodymium recent DS Series feature
magnet. It has been high Bl motors with four
developed with a new layer aluminium voice
ventilated magnet coils, for high sensitivity
assembly to assist subwoofer applications.
the cooling of the
voice coil. NDL series
woofers strike a balance
between light weight and
performance.
The MDN and MBX

series are specifically
bcspeakers.com 31
®
ND
LF
DRIV
ERS
35NDF26
ND FULL RANGE
60 W 26 mm (1 in) Neodymium magnet

continuous program aluminium voice coil allows a very light yet
power capacity powerful motor
assembly
88 dB 100 - 20000 Hz OEM Quantities Only

Hz Hz

Qms 8.8
Qts 0.55
Vas 1.9 dm3 (0.07 ft3)
Frequency Range 100 - 20000 Hz X max ± 3.2 mm Shipping Weight (48 units) 8.75 kg (19.29 lb)
Voice Coil Diameter 26 mm (1.02 in) X var ± 2.9 mm Shipping Box (48 units) 425 X 335 X 250 mm
Winding Material Aluminium Mms 4g (16.73 X 13.19 X 9.84 in)
Former Material Kapton Bl 5.1 T·m
Flux Density 1.3 T
Magnet Material Neodymium Inside Slug
Waterproof Cone Treatment None 1
Applied RMS Voltage is set to 2.83V sine wave preconditioning test.

bcspeakers.com 32
®
ND
LF
DRIV
ERS
4NDF34
ND FULL RANGE
200 W 34 mm (1.3 in) Neodymium magnet

continuous program copper voice coil allows a very light yet
assembly
88 dB 110 - 8000 Hz OEM Quantities Only

Hz Hz

Frequency Range 110 - 8000 Hz η0 0.7 % Shipping Weight (24 units) 13.1 (28.88 lb)
Voice Coil Diameter 34 mm (1.3 in) X max ± 3.8 mm Shipping Box (24 units) 425 X 335 X 250 mm
Winding Material Copper X var ± 5.7 mm (16.73 X 13.19 X 9.84 in)
Former Material Glass Fibre Mms 6g
Winding Depth 11 mm (0.43 in) Bl 9.0 T·m
bcspeakers.com 33
®
ND
LF
DRIV
ERS
5MDN38
ND MIDRANGE
200 W 38 mm (1.5 in) Shorting copper cap

96 dB 240 - 10000 Hz
Hz Hz

Qms 2.6
Qts 0.45
Vas 0.6 dm3 (0.02 ft3)
Winding Material Aluminium Mms 9g (8.27x8.27x4.92 in)
Winding Depth 10 mm (0.4 in) Le 0.4 mH Service kit RCK005MDN38-8
Flux Density 1.25 T
Magnet Material Neodymium Ring

bcspeakers.com 34
®
ND
LF
DRIV
ERS
5NSM38
ND MIDRANGE
Ideal for Direct

Radiation and
Horn Loaded
240 W 38 mm (1.5 in) Midrange application
power capacity Aluminium
demodulating ring for
very low distortion
99 dB 300 - 3500 Hz
sensitivity response Hydrophobic Cone
treatment
Hz Hz

Minimum Impedance 6.3 Ω Qes 0.99 Baffle Cutout Diameter 122 mm (4 in)
Frequency Range 300 - 3500 Hz η0 1.15 % Shipping Weight 1.82kg (4.01 lb)
Voice Coil Diameter 38 mm (1.5 in) X max ± 2.2 mm Shipping Box 255x255x150 mm
Former Material Glass Fibre Mms 9g
Winding Depth 7 mm (0.28 in) Bl 10.1 T·m Service kit RCK005NSM38-8
Waterproof Cone Treatment Impregnated Cone 1

bcspeakers.com 35
®
ND
LF
DRIV
ERS
5NDL38
ND WOOFER
180 W 38 mm (1.5 in) Shorting copper cap

91 dB 80 - 7000 Hz
Hz Hz

Winding Depth 10 mm (0.37 in) Bl 9.2 T·m Service kit RCK005NDL38-8
Power on Continuous Program is SPL from 100 to 7000 Hz.
Applied RMS Voltage is set to 2.83V for preconditioning test.
Also available in 16 Ω, data upon request impedance. Loudspeaker in free air. 8 ohms Nominal Impedance. Average
bcspeakers.com 36
®
ND
LF
DRIV
ERS
6MDN44
ND MIDRANGE
Ventilated voice
power compression
continuous program aluminium voice coil allows a very
power capacity light yet powerful
motor assembly
96.5 dB 150 - 6000 Hz Aluminium
sensitivity response demodulating ring for
very low distortion
Hz Hz

Sensitivity (1W/1m)3 96.5 dB Sd 132 cm2 (20.5 in2) Net Weight 1.0 kg (2.2 lb)
Winding Depth 10 mm (0.37 in) Bl 11 T·m Service kit RCK06MDN44-8

bcspeakers.com 37
®
ND
LF
DRIV
ERS
6MBX44
ND WOOFER

motor assembly
Aluminium
98 dB 115 - 5000 Hz demodulating ring
sensitivity response for very low distortion
Hz Hz

Qms 3.9
Qts 0.31
Vas 4.1 dm3 (0.14 ft3)
Winding Depth 10 mm (0.37 in) Le 0.2 mH Service kit RCK06MBX44 -8
Flux Density 1.55 T
bcspeakers.com 38
®
ND
LF
DRIV
ERS
6NDL38
ND WOOFER
Neodymium magnet
300 W 38 mm (1.5 in) allows a very
light yet powerful
power capacity
motor assembly
Aluminium
92 dB 70 - 6000 Hz demodulating
sensitivity response ring allows a very
low distortion
Hz Hz

Qms 11.5
Qts 0.42
Vas 7 dm3 (0.25 ft3)
Former Material Kapton Bl 9.5 T·m
Winding Depth 12 mm (0.5 in) Le 0.6 mH Service kit RCK06NDL38-8
Flux Density 1.15 T
bcspeakers.com 39
®
ND
LF
DRIV
ERS
8MDN51
ND WOOFER
400 W 51 mm (2 in) Neodymium ring

continuous program copper voice coil magnet assembly
power capacity Ventilated voice
power compression
97 dB 70 - 4000 Hz
Hz Hz

Frequency Range 70 - 4000 Hz η0 2.4% Shipping Weight 3.0 kg (6.61 lb)
Winding Material Aluminium X var ± 6 mm (9.84x9.84x4.92 in)
Former Material Kapton Mms 23 g
Winding Depth 16 mm (0.62 in) Bl 15.3 T·m Service kit RCK008MDN51-8
bcspeakers.com 40
®
ND
LF
DRIV
ERS
8MBX51
ND WOOFER
Neodymium ring
magnet assembly
400 W 51 mm (2 in)
continuous program copper voice coil Aluminium
power capacity demodulating ring
96.5 dB 60 - 4000 Hz Ventilated voice

power compression
Hz Hz

Frequency Range 60 - 4000 Hz η0 1.7 % Shipping Weight 2.25 kg (4.96 in)
Winding Depth 15 mm (0.59 in) Bl 11.4 T·m Service kit RCK008MBX51-8

bcspeakers.com 41
®
ND
LF
DRIV
ERS
8NSM64
ND MIDRANGE
500 W 64 mm (2.52 in) Ideal for Direct

continuous program aluminium voice coil Radiation and
power capacity Horn Loaded
Midrange application

Hz Hz

Winding Material Aluminum X var ± 1.7 mm (11.61x12.36x6.89 in)
Winding Depth 13 mm (0.51 in) Bl 22 T·m Service kit RCK008NSM64-8

bcspeakers.com 42
®
ND
LF
DRIV
ERS
8NDL51
ND WOOFER
Neodymium magnet
allows a very
light yet powerful
400 W 51 mm (2 in) motor assembly
power capacity Shorting copper cap for
extended HF response

power compression
Hz Hz

Frequency Range 65 - 3000 Hz η0 1% Shipping Weight 2.25 kg (4.96 lb)
Two hour test made with continuous Power on Continuous Program is Average SPL from 300 to 3000 Hz.
Also available in 4 and 16 Ω, data upon request impedance. Loudspeaker in free air.2 for 8 ohms Nominal Impedance.

bcspeakers.com 43
®
ND
LF
DRIV
ERS
8NW51
ND WOOFER
Neodymium ring
magnet allows a very
400 W 51 mm (2 in) high force factor
continuous program copper voice coil and linear excursion
power capacity
Shorting copper cap for
power compression
Hz Hz

Power Handling Qms 2.7 Depth 100 mm (4 in)
Sensitivity (1W/1m)3 96.5 dB Sd 220 cm2 (34.1 in2) Net Weight 3 kg (6.6 lb)
Winding Depth 19 mm (0.75 in) Bl 18.9 T·m Service kit RCK008NW51-8
bcspeakers.com 44
®
ND
LF
DRIV
ERS
8NDL64
ND WOOFER
700 W 64 mm (2.5 in) Neodymium inside slug

continuous program copper voice coil magnet assembly
power compression
Hz Hz


bcspeakers.com 45
®
ND
LF
DRIV
ERS
8BG51
ND WOOFER
Neodymium magnet
allows a very
light yet powerful
500 W 51 mm (2 in) motor assembly

power compression
Hz Hz

Winding Depth 17 mm (0.65 in) Bl 11.8 T·m Service kit RCK008BG51-8
bcspeakers.com 46
®
ND
LF
DRIV
ERS
10MBX64
ND MIDBASS
Neodymium inside slug

magnet assembly
700 W 64 mm (2.5 in)
continuous program aluminium voice coil Aluminium
99 dB 65 - 6000 Hz Ventilated voice coil

sensitivity response gap for reduced power
compression
Hz Hz

Winding Depth 13 mm (0.51 in) Bl 17.1 T·m Service kit RCK10MBX64-8

bcspeakers.com 47
®
ND
LF
DRIV
ERS
10NSM76
ND MIDRANGE
800 W 76 mm (3 in) Ideal for Direct

continuous program aluminium voice coil Radiation and
power capacity Horn Loaded
Midrange application
100 dB 235 - 3500 Hz

Hz Hz

Winding Depth 11 mm (0.45 in) Bl 21.5 T·m Service kit RCk10NSM76-8
bcspeakers.com 48
®
ND
LF
DRIV
ERS
10HPL64
ND WOOFER

allows a very
motor assembly
98.5 dB 60 - 4000 Hz
Hz Hz

Sensitivity (1W/1m)3 98.5 dB Sd 320 cm2 (50 in2) Net Weight 2 kg (4.4 lb)
Winding Depth 12 mm (0.47 in) Bl 15 T·m Service kit RCK010HPL64-8

bcspeakers.com 49
®
ND
LF
DRIV
ERS
10NDL64
ND WOOFER

motor assembly

power compression
Hz Hz

bcspeakers.com 50
®
ND
LF
DRIV
ERS
10NW64
ND WOOFER
Neodymium magnet
allows a very
light yet powerful
600 W 64 mm (2.5 in) motor assembly

power compression
Hz Hz


bcspeakers.com 51
®
ND
LF
DRIV
ERS
12CL76
ND WOOFER
700 W 76 mm (3 in) Ventilated voice coil

continuous program copper voice coil gap for reduced power
power capacity compression
98.5 dB 45 - 3000 Hz
Hz Hz

Winding Depth 17 mm (0.67 in) Bl 22.4 T·m Service kit RCK12CL76-8
bcspeakers.com 52
®
ND
LF
DRIV
ERS
12NDL76
ND WOOFER

motor assembly

power compression
Hz Hz

Qms 4.2
Qts 0.2
Vas 73 dm3 (2.5 ft3)
Voice Coil Diameter 76 mm (3 in) X var ± 6.5 mm Shipping Box 360x360x200 mm
Flux Density 1.25 T
bcspeakers.com 53
®
ND
LF
DRIV
ERS
12NW76
ND WOOFER
Neodymium ring
high force factor and
linear excursion
1000 W 76 mm (3 in)

power compression
Hz Hz

Magnetic Gap Depth 11 mm (0.43 in) Le 1.25 mH Service kit RCK12NW76-8

bcspeakers.com 54
®
ND
LF
DRIV
ERS
12NDL88
ND WOOFER
1400 W 88 mm (3.5 in)

power capacity
98 dB 50 - 3000 Hz
Hz Hz

Qms 5
Qts 0.27
Vas 52 dm3 (1.84 ft3)
Sensitivity (1W/1m)3 98 dB η0 2.3 % Net Weight 4.8 (10.58 lb)
Magnetic Gap Depth 10 mm (0.4 in) EBP 175 Hz Service kit RCK12NDL88-8
Flux Density 1.15 T
bcspeakers.com 55
®
ND
LF
DRIV
ERS
12BG100
ND SUBWOOFER
Aluminium
demodulating ring
FEA optimized
Neodymium magnet
2000 W 100 mm (4 in) assembly
Double silicone
power capacity
compliance
power compression
Hz Hz

Minumum Impedance 5.8 Ω Qes 0.35 Baffle Cutout Diameter 282 mm (11.1 in)
Qms 6.8
Qts 0.33
Vas 41 dm3 (1.45 ft3)
Sensitivity (1W/1m)3 93 dB η0 0.7 % Net Weight 8.2 kg (18 lb)
Frequency Range 40 - 1000 Hz X max ± 10.5 mm Shipping Weight 9.1 kg (20.06)
Winding Depth 27 mm (1.06 in) Le 1.6 mH Service kit RCK12BG100-8
Flux Density 1.15 T

bcspeakers.com 56
®
ND
LF
DRIV
ERS
12NBX100
ND SUBWOOFER
Aluminium
demodulating ring
FEA optimized
Neodymium magnet
continuous program aluminium voice coil Double silicone
power capacity
compliance
power compression
Hz Hz

Sensitivity (1W/1m)3 96 dB Sd 531 cm2 (82 in2) Net Weight 8 kg (17.6 lb)
Winding Depth 25 mm (1 in) Bl 25.6 T·m
Magnetic Gap Depth 11 mm (0.43 in) Le 1.9 mH Service kit RCK12NBX100-8
Waterproof Cone Treatment Both Sides Also available 12 NBX 100 - 4 impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
1
pink noise signal (6 dB crest factor) defined as 3 dB greater then the 4
bcspeakers.com 57
®
ND
LF
DRIV
ERS
14NDL76
ND WOOFER
1000 W 76 mm (3 in) Very light yet

continuous program copper voice coil powerful motor
power capacity assembly
Aluminium
Hz Hz

Qms 8.2
Power Handling Depth 161 mm ( 6.34 in)
Qts 0.3
Vas 123 dm3 (4.34 ft3)
Voice Coil Diameter 76 mm (3 in) X var ± 9.5 mm Shipping Box 425x425x224 mm
Flux Density 1.15 T
bcspeakers.com 58
®
ND
LF
DRIV
ERS
14NDL88
ND WOOFER
1400 W 88 mm (3.5 in) Very light yet

continuous program powerful motor
aluminium voice coil
power capacity assembly
Aluminium
Hz Hz

bcspeakers.com 59
®
ND
LF
DRIV
ERS
15NDL76
ND WOOFER

continuous program copper voice coil allows a very
motor assembly

power compression
Hz Hz

Magnetic Gap Depth 10.5 mm (0.4 in) Le 1.5 mH

bcspeakers.com 60
®
ND
LF
DRIV
ERS
15NW76
ND WOOFER
Aluminium
demodulating ring
Neodymium ring
high force factor and
1200 W 76 mm (3 in) linear excursion
power capacity Double silicone
compliance
power compression
Hz Hz

bcspeakers.com 61
®
ND
LF
DRIV
ERS
15NDL88
ND WOOFER
Double silicone
compliance
1400 W 88 mm (3.5 in)
Neodymium magnet
99 dB 45 - 3000 Hz allows a very
sensitivity response light yet powerful
motor assembly
Hz Hz


bcspeakers.com 62
®
ND
LF
DRIV
ERS
15NA100
ND WOOFER
FEA optimized
Neodymium magnet
power capacity Double silicone
compliance
power compression
Hz Hz

Qts 0.28
Vas 88 dm3 (3.1 ft3)
Continuous Program2 1600 W Air volume occupied by driver 6 dm3 (0.21 ft3)
Sd 855 cm2 (132.5 in2)
Sensitivity (1W/1m)3 98 dB η0 Net Weight 9.3 kg (20.5 lbs)
2.9 %
Magnetic Gap Depth 11 mm (0.43 in) EBP 162 Hz Service kit RCK15NA100-8
Flux Density 1.2 T
Continuous Program Power is Average SPL from 200 to 2000 Hz.
bcspeakers.com 63
®
ND
LF
DRIV
ERS
15BG100
ND SUBWOOFER
Aluminium
demodulating ring
FEA optimized
Neodymium magnet
power capacity
compliance
power compression
Hz Hz

Minumum Impedance 6Ω Qes 0.49 Baffle Cutout Diameter 354 mm (13.9 in)
Winding Depth 27 mm (1.06 in) Bl 23 T·m Service kit RCK15BG100-8
1
Power on Continuous Program is 500Hz.
Also available in 4 Ω, data upon request impedance. Loudspeaker in free air. for 8 ohms. Average SPL from 100 to

bcspeakers.com 64
®
ND
LF
DRIV
ERS
15NBX100
ND SUBWOOFER
FEA optimized
Neodymium magnet
assembly
Aluminium
demodulating ring
2000 W 100 mm (4 in)
compliance

power compression
Hz Hz

Sensitivity (1W/1m)3 97 dB Sd 855 cm2 (132.5 in2) Net Weight 9 kg (19.8 lb)
Winding Depth 25 mm (1.0 in) Bl 25 T·m
Magnetic Gap Depth 11 mm (0.43 in) Le 2 mH Service kit RCK15NBX100-8
bcspeakers.com 65
®
ND
LF
DRIV
ERS
15SW100
ND SUBWOOFER
Double silicone
compliance
Ventilated voice
power compression
continuous program split winding demodulating ring
power capacity copper voice coil for very low distortion
95 dB 40 - 1500 Hz 57 mm
before damage
Hz Hz

Magnetic Gap Depth 16 mm (0.63 in) Le 2.2 mH Service kit RCK15SW100-8

bcspeakers.com 66
®
ND
LF
DRIV
ERS
15SW115
ND SUBWOOFER
Double silicone
compliance
Ventilated voice
power compression
continuous program split winding copper demodulating ring
power capacity voice coil for very low distortion
96 dB 35 - 1500 Hz 60 mm
before damage
Hz Hz

Sensitivity (1W/1m)3 96 dB Sd 855 cm2 (132.5 in2) Net Weight 12 kg (26.4 lb)
Winding Depth 34 mm (1.33 in) Bl 30 T·m Service kit RCK15SW115-8
bcspeakers.com 67
®
ND
LF
DRIV
ERS
18NBX100
ND SUBWOOFER
Double silicone
compliance
Ventilated voice
power compression
96.5 dB 35 - 1000 Hz 57 mm
before damage
Hz Hz

Continuous Program2 2400 W Vas 198 dm3 (7 ft3) Air volume occupied by driver 8.5 dm3 (0.03 ft3)
Winding Depth 25 mm (1 in) Bl 24.8 T·m Service kit RCK18NBX100-8
bcspeakers.com 68
®
ND
LF
DRIV
ERS
18NW100
ND SUBWOOFER
FEA optimized
Neodymium magnet
assembly allows the
highest force factor and
2400 W 100 mm (4 in) excursion capability
compliance
power compression
Hz Hz

Winding Depth 25 mm (1 in) Bl 28 T·m Service kit RCK18NW100-8
Flux Density 1.2 T
bcspeakers.com 69
®
ND
LF
DRIV
ERS
18SW100
ND SUBWOOFER
Aluminium
demodulating ring
Double silicone
compliance
3000 W 100 mm (4 in) Ventilated voice
continuous program split winding copper coil gap for reduced
power capacity voice coil power compression
97 dB 35 - 1000 Hz 57 mm
before damage
Hz Hz

Qms 5.9
Qts 0.38
Vas 180 dm3 (6.3 ft3)
Sensitivity (1W/1m)3 97 dB η0 1.9 % Net Weight 10 kg (22 lb)
Magnetic Gap Depth 14 mm (0.55 in) EBP 87 Hz Service kit RCK18SW100-8
Flux Density 1.15 T
bcspeakers.com 70
®
ND
LF
DRIV
ERS
18SW115
ND SUBWOOFER
Double silicone
compliance
Ventilated voice
coil gap fpr reduced
power compression
97 dB 35 - 1500 Hz 60 mm
before damage
Hz Hz

Nominal (AES)1 1700 W Qts 0.3 Flange and gasket thickness 16 mm (0.62 in)
Sensitivity (1W/1m)3 97 dB Sd 1210 cm2 (187.6 in2) Net Weight 13.7 Kg (30.2 lb)
Frequency Range 35-1500 Hz η0 1.9 % Shipping Weight 13.9 kg (30.6 lb)
Winding Depth 34 mm (1.33 in) Bl 30.3 T·m Service kit RCK18SW115-8
Continuous Program Power is Average SPL from 150 to 1500 Hz.
bcspeakers.com 71
®
ND
LF
DRIV
ERS
18DS115
ND SUBWOOFER
Neodymium magnet
allows a very high force
factor and linear excursion
Double silicone spider
with optimized compliance
Preliminary data Ventilated voice coil gap
for reduced power
compression
3400 W 116 mm (4.5 in)
continuous program split four layer winding Aluminium demodulating
power capacity aluminium voice coil ring for very low distortion
98 dB 30 - 500 Hz 60 mm
before damage

300
Hz Hz

Minumum Impedance 7Ω Qes 0.21 Baffle Cutout Diameter 422 mm (16.6 in)
Qms 4.3
Qts 0.2
Vas 168 dm3 (5.93 ft3)
Sensitivity (1W/1m)3 98 dB η0 2.2 % Net Weight 12 kg (26.46 lb)
Magnetic Gap Depth 14 mm (0.55 in) EBP 142 Hz Service kit RCK18DS115-8
Flux Density 0.8 T
bcspeakers.com 72
®
ND
LF
DRIV
ERS
ND SUBWOOFER
18IPAL
Neodymium magnet
factor and linear
excursion
Ventilated voice coil
gap for reduced power
compression
3400 W 116 mm (4.5 in)
continuous program split winding Available to oem
power capacity aluminium voice coil manufacturers only
97 dB 32 - 1000 Hz 80 mm
before damage
Hz Hz

Frequency Range 32 - 1000 Hz η0 3.3 % Shipping Weight 18.9 kg (41,67 lb)
Winding Depth 44 mm (1.7 in) Bl 24.5 T·m Service kit RCK18IPALM
bcspeakers.com 73
®
ND
LF
DRIV
ERS
21DS115
ND SUBWOOFER
Neodymium magnet
factor and linear excursion
Double silicone spider with
optimized compliance
Ventilated voice coil gap for
3400 W 116 mm (4.5 in) reduced power compression
continuous program four layer winding Aluminium demodulating
power capacity aluminium voice coil ring for very low distortion
99 dB 30 - 1000 Hz 60 mm
before damage

300
Hz Hz

Continuous Program2 3400 W Vas 269.0 dm3 (9.5 ft3) Air volume occupied by driver 15 dm3 (0.53 ft3)
Winding Depth 36 mm (1.42 in) Bl 40.8 T·m Service kit RCK21DS115-8
bcspeakers.com 74
®
ND
LF
DRIV
ERS
21SW152
ND SUBWOOFER
Double silicone
compliance
Ventilated voice
power compression
continuous program split winding copper demodulating ring
power capacity voice coil for very low distortion
96 dB 30 - 1000 Hz 60 mm
before damage
Hz Hz

Continuous Program2 4000 W Vas 200.0 dm3 (7.0 ft3) Air volume occupied by driver 16 dm3 (0.56 ft3)
Winding Depth 30 mm (1.18 in) Bl 32.5 T·m Service kit RCK21SW152-4
Also available in 8 16 Ω, data upon request impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
bcspeakers.com 75
FE
COAX
IALS
Coaxial loudspeakers All coaxial loudspeaker

combine the features cones are treated with
of our best cone a protective waterproof
loudspeakers and coating and a fine mesh
compression drivers HF driver protection
into a one-piece, point- screen, allowing
source solution. Their operation in a wide
format enables electro- range of environments.
acoustical designers The waveguides loaded
to build very compact, on the compression
versatile systems. drivers are designed
in accordance with the
latest theories, resulting
in uniform angular
coverage and high
The majority of our acoustical load, with
more recent FCX and very low distortion.
FHX series coaxial
designs feature a single
magnet structure for
both the woofer and high
frequency driver. This Many of our coaxial
solution offers a more loudspeakers
compact, lightweight, are available in
and cost effective alternative impedance
solution than dual driver configurations.
coaxial alternatives, with Please ask your B&C
little or no impact on representative for more
overall performance. information.
bcspeakers.com 76
®
FE
COAX
IALS
5FCX44
FE-ND COAXIAL
200 W 70°
continuous program nominal coverage
power capacity
91 dB 60 - 18000 Hz
Hz Hz
SPECIFICATIONS Voice Coil Diameter 25 mm (1.5 in) THIELE & SMALL PARAMETERS
Nom. Diameter 127 mm (5 in) Winding Material Aluminium Fs 61 Hz
Nom. Impedance 8Ω Diaphragm Material Polyester Re 5.6 Ω
Minimum Impedance 6.5 Ω (LF), 6.5 Ω (HF) Recommended Crossover5 2.5 kHz Qes 0.25
Frequency Range 60 - 18000 Hz Flux Density 1.65 T Qms 7.8
Dispersion Angle1 70° Inductance 0.1 mH Qts 0.25
Magnet Material Ferrite (LF)/Neo Ring (HF) Vas 7 dm3 (0.25 ft3)
Waterproof cone treatment Front side MOUNTING AND SHIPPING INFORMATION Sd 95 cm2 (14.7 in2)
η0 0.6 %
LF UNIT Overall Diameter 136 mm (5.35 in)
Sensitivity (1W/1m)2 91 dB X max ± 3 mm
Bolt Circle Diameter 142 mm (5.6 in)
Power Handling Nom. (AES)3 100 W X var ± 5 mm
Baffle Cutout Diameter 122 mm (4.8 in)
Continuous Program4 200 W Mms 12 g
Depth 110 mm (4.33 in)
Voice Coil Diameter 44 mm (1.7 in) Bl 10.5 T·m
Flange and Gasket Thickness 8 mm (0.31 in)
Winding Material Copper Le 0.8 mH
Net Weight 1.85 kg (4.1 lb)
Shipping Weight 2.2 kg (4.85 lb)
Former Material Kapton
Shipping Box 255x255x150 mm Service kit LF RCK005FCX44-8
Winding Depth 9.0 mm (0.35 in)
(10.04x10.04x5.90 in) Service kit HF MMDDE5-8
Magnetic Gap Depth 6.0 mm (0.24 in)
1
1 Included by –6 dB down points. HF - Two hour test made with 4
Power on Continuous Program is
HF UNIT 2
Applied RMS Voltage is set to 2.83V. continuous pink noise signal (6 dB defined as 3 dB greater than the
Sensitivity (1W/1m)2 107.5 dB 3
LF - Two hour test made with crest factor) within the range from the Nominal rating.
Power Handling Nom. (AES)3 10 W continuous pink noise signal (6 dB recommended crossover frequency to 5
12 dB/oct. or higher slope high-pass
crest factor) within the range Fs-10Fs. 20 kHz. LF and HF Power calculated on filter.
Continuous Program4 20 W Loudspeaker in free air. rated minimum impedance.
bcspeakers.com 77
®
FE
COAX
IALS
6FHX51
FE-ND COAXIAL
300 W 70°
power capacity
93 dB 85 - 18000 Hz
Hz Hz
SPECIFICATIONS Voice Coil Diameter 25 mm (1 in) THIELE & SMALL PARAMETERS

Nom. Diameter 170 mm (6.5 in) Winding Material Aluminium Fs 85 Hz
Minimum Impedance 6.5 Ω (LF), 7 Ω (HF) Recommended Crossover5 2.5 kHz Qes 0.4
Magnet Material Ferrite (LF)/Neo Ring (HF) Vas 5 dm3 (0.18 ft3)
Waterproof cone treatment Front side Sd 132 cm2 (20.5 in2)
MOUNTING AND SHIPPING INFORMATION
η0 0.83 %
Sensitivity (1W/1m)2 93 dB Bolt Circle Diameter 172 mm (6.7 in) X max ± 5 mm
Power Handling Nom. (AES)3 150 W Baffle Cutout Diameter 146 mm (5.75 in) X var ± 5.7 mm
Continuous Program4 300 W Depth 122 mm (4.8 in) Mms 16 g
Voice Coil Diameter 51 mm (2 in) Flange and Gasket Thickness 12 mm (0.47 in) Bl 11.3 T·m
Winding Material Copper Net Weight 2.7 kg (5.9 lb) Le 1 mH
Flux Density 1.05 T Shipping Weight 3.05 kg (6.72 lb) EBP 212 Hz
Former Material Kapton Shipping Box 255x255x150 mm Service kit LF RCK06FHX51-8
Winding Depth 13.0 mm (0,51 in) (10.04x10.04x5.90 in) Service kit HF MMDDE5-8
1
HF UNIT 2
Sensitivity (1W/1m)2 108.5 dB 3
Power Handling3 10 W continuous pink noise signal (6 dB recommended crossover frequency to 5
crest factor) within the range Fs-10Fs. 20 kHz. LF and HF Power calculated filter.
Continuous Program4 20 W Loudspeaker in free air. on rated minimum impedance.
bcspeakers.com 78
®
FE
COAX
IALS
8CX21
FE COAXIAL
400 W 100°
power capacity
94 dB 75 - 20000 Hz
Hz Hz
Magnet Material Ferrite Ring Vas 15 dm3 (0.55 ft3)
Waterproof cone treatment None MOUNTING AND SHIPPING INFORMATION Sd 220 cm2 (34.1 in2)
Overall Diameter 225 mm (8.8 in) η0 1.5 %
LF UNIT
Sensitivity (1W/1m)2 94 dB Bolt Circle Diameter 210 mm (8.3 in) X max ± 5 mm
Voice Coil Diameter 51 mm (2.0 in) Flange and Gasket Thickness 11 mm (0.4 in) Bl 11.5 T·m
Winding Material Copper Net Weight 4.0 kg (8.8 lb) Le 1.2 mH
Former Material Kapton Shipping Box 295x314x175 mm
Winding Depth 16.0 mm (0.63 in) ( 11.61x12.36x6.89 in) Service kit LF RCK008CX21-8
Magnetic Gap Depth 8.0 mm (0.31 in) Service kit HF MMD012-8
Also available in 16 Ω, data upon request
1
HF UNIT continuous pink noise signal (6 dB
2
Applied RMS Voltage is set to 2.83V. defined as 3 dB greater than the
Sensitivity (1W/1m)2 101 dB 3
crest factor) within the range Fs-10Fs. 20 kHz. LF and HF Power calculated on
filter.
bcspeakers.com 79
®
FE
COAX
IALS
8FCX51
FE COAXIAL
500 W 100° Single ferrite

continuous program nominal coverage magnet assembly
power capacity
96 dB 69 - 18000 Hz
Hz Hz
Nom. Impedance 8Ω Diaphragm Material Polyimide Re 4.9 Ω
Minimum Impedance 6 Ω (LF), 7 Ω (HF) Recommended Crossover5 1.8 kHz Qes 0.36
η0 1.4 %
Sensitivity (1W/1m)2 96 dB Bolt Circle Diameter 210 mm (8.3 in) X max ± 6.5 mm
Power Handling Nom. (AES)3 250 W Baffle Cutout Diameter 187 mm (7.4 in) X var ± 6 mm
Winding Material Aluminium Net Weight 5.1 kg (11.2 lb) Le 0.9 mH
Former Material Glass Fibre Shipping Box 295x314x175 mm Service kit LF RCK008FCX44-8
Winding Depth 17.5 mm (0.69 in) ( 11.61x12.36x6.89 in) Service kit HF MMD400-8
Magnetic Gap Depth 8.0 mm (0.31 in) 1
HF UNIT 2
continuous pink noise signal (6 dB recommended crossover frequency to 5
Power Handling3 50 W crest factor) within the range Fs-10Fs. 20 kHz. LF and HF Power calculated on
filter.
bcspeakers.com 80
®
FE
COAX
IALS
10FCX64
FE COAXIAL

power capacity
95 dB 65 - 18000 Hz
Hz Hz
Nom. Impedance 8Ω Diaphragm Material Titanium Re 5.5 Ω
LF UNIT
Power Handling Nom. (AES)3 250 W Baffle Cutout Diameter 230 mm (8.8 in) X var ± 6 mm
Continuous Program4 500 W Depth 140 mm (5.51 in) Mms 36.5 g
Voice Coil Diameter 64 mm (2.5 in) Flange and Gasket Thickness 12.5 mm (0.5in) Bl 13.4 T·m
Winding Material Copper Net Weight 5.65 kg (12.8 lb) Le 1.2 mH
Flux Density 0.96 T Shipping Weight 6.45 kg (14.2 lb)
Former Material Kapton Shipping Box 360x360x200 mm Service kit LF RCK10FCX64-8
Winding Depth 13.0 mm (0.51 in) (14.17x14.17x7.87 in) Service kit HF MMD620TN-8M
HF UNIT 2
Power Handling Nom. (AES)3 80 W crest factor) within the range Fs-10Fs. 20 kHz. LF and HF Power calculated on
filter.
bcspeakers.com 81
®
FE
COAX
IALS
12FHX76
FE COAXIAL
700 W 60°x 40° Modified exponential

continuous program nominal coverage horn flare for improved
power capacity acoustic loading
and controlled coverage
98 dB 45 - 18000 Hz Single ferrite

sensitivity response magnet assembly
Hz Hz

Minimum Impedance 6 Ω (LF), 7.8 Ω (HF) Recommended Crossover5 1.2 kHz Qes 0.36
Dispersion Angle1 60° x 40° Inductance 0.14 mH Qts 0.33
Magnet Material Ferrite Ring MOUNTING AND SHIPPING INFORMATION Vas 88 dm3 (3.1 ft3)
Waterproof cone treatment Front side Overall Diameter 315 mm (12.4 in) Sd 522 cm2 (80.9 in2)
η0 2.7 %
LF UNIT Bolt Circle Diameter 298 mm (11.7 in)
Sensitivity (1W/1m)2 98 dB Baffle Cutout Diameter 284 mm (11.14 in) X max ± 6.5 mm
Power Handling Nom. (AES)3 350 W Depth 169 mm (6.65 in) X var ± 4 mm
Continuous Program4 700 W Flange and Gasket Thickness 13 mm (0.51 in) Mms 47 g
Voice Coil Diameter 76 mm (3 in) Net Weight 8.5 kg (18.7 lb) Bl 14.4 T·m
Winding Material Copper Shipping Weight 10.3 kg (22.7 lb) Le 1.6 mH
Flux Density 1.0 T Shipping Box 425x425x224 mm EBP 133 Hz
Former Material Glass Fibre (16.73x16.73x8.82 in)
Service kit LF RCK12FHX76-8
Winding Depth 16.5 mm (0.65 in) Also available in 4 Ω, data upon request
Also available 12FCX76 (without horn/ 80° disp.)
Service kit HF MMD3BTN-8M
1
HF UNIT 2
continuous pink noise signal (6 dB recommended crossover frequency to
Power Handling Nom. (AES)3 80 W 20 kHz. LF and HF Power calculated on
5
crest factor) within the range Fs-10Fs. filter.
bcspeakers.com 82
®
FE
COAX
IALS
15FCX76
FE COAXIAL

power capacity
98 dB 40 - 18000 Hz
Hz Hz

LF UNIT
Winding Material Copper Net Weight 9 kg (19.8 lb) Le 1.2 mH
Former Material Glass Fibre Shipping Box 500x495x275 mm
(19.68x19.48x10.83 in) Service kit LF RCK15FCX76-8
Winding Depth 16.5 mm (0.65 in)
Also available 15FHX76 (with 60°x 40° horn) Service kit HF MMD3BTN-8M
1
HF UNIT 2
Continuous Program4 160 W filter.
Loudspeaker in free air. rated minimum impedance.
bcspeakers.com 83
ND
COAX
IALS
Coaxial loudspeakers All coaxial loudspeaker

combine the features cones are treated with
of our best cone a protective waterproof
loudspeakers and coating and a fine mesh
compression drivers HF driver protection
into a one-piece, point- screen, allowing
source solution. Their operation in a wide
format enables electro- range of environments.
acoustical designers The waveguides loaded
to build very compact, on the compression
versatile systems. drivers are designed
in accordance with the
latest theories, resulting
in uniform angular
coverage and high
The majority of our acoustical load, with
more recent FCX and very low distortion.
FHX series coaxial
designs feature a single
magnet structure for
both the woofer and high Many of our coaxial
frequency driver. This loudspeakers
solution offers a more are available in
compact, lightweight, alternative impedance
and cost effective configurations.
solution than dual driver Please ask your B&C
coaxial alternatives, with representative for more
little or no impact on information.
overall performance.
bcspeakers.com 84
®
ND
COAX
IALS
4CXN36
ND COAXIAL
Preliminary data 21.5 mm (0.85”)

HF unit exit diameter
200 W 70° Neodymium magnet
continuous program nominal coverage allows a very light yet
assembly
Hz Hz
Nom. Impedance 8Ω Diaphragm Material HT Polymer Re 5.5 Ω
Magnet Material Neodymium Inside Slug Vas 1.9 dm3 (0.07 ft3)
Waterproof Cone Treatment None MOUNTING AND SHIPPING INFORMATION Sd 56.0 cm2 (8.68 in2)
η0 0.25 %
Continuous Program4 200 W Mms 6g
Former Material Glass Fibre Shipping Box 210x210x125 mm Service kit LF RCK04CXN76-8
Winding Depth 11.0 mm (0.43 in) (8.27x8.27x4.92 in) Service kit HF MMDDE110-8
HF UNIT 2
filter.
bcspeakers.com 85
®
ND
COAX
IALS
6HCX51
ND COAXIAL
300 W 70° Single Neodymium

power capacity
92 dB 90 - 18000 Hz
Hz Hz
Magnet Material Neodymium Ring MOUNTING AND SHIPPING INFORMATION Vas 5 dm3 (0.18 ft3)
Overall Diameter 187 mm (7.4 in) η0
LF UNIT 0.8 %
Power Handling Nom. (AES)3 150 W X var ± 5.5 mm
Voice Coil Diameter 51 mm (2 in) Bl 10.9 T·m
Shipping Box 255x255x150 mm
Former Material Kapton (10.04x10.04x5.90 in) Service kit LF RCK06HCX51-8
Winding Depth 13.0 mm (0.51 in) Also available in 16 Ω, data upon request Service kit HF MMD012-8
1 Included by –6 dB down points. test made with continuous pink noise 4
HF UNIT 2
Applied RMS Voltage is set to 2.83V. signal (6 dB crest factor) within the defined as 3 dB greater than the
Sensitivity (1W/1m)2 105 dB
3
LF - Two hour test made with range from the recommended Nominal rating.
continuous pink noise signal (6 dB crossover frequency to 20 kHz. 5
Power Handling Nom. (AES)3 25 W
crest factor) within the range Fs-10Fs. LF and HF Power calculated on rated filter.
Continuous Program4 50 W Loudspeaker in free air. HF - Two hours minimum impedance.
bcspeakers.com 86
®
ND
COAX
IALS
8CXN51
ND COAXIAL

magnet assembly
power capacity
97 dB 70 - 18000 Hz
Hz Hz
Nom. Impedance 8Ω Diaphragm Material Polyimide Re 4.9 Ω
LF UNIT 1.8 %
Winding Material Aluminuim Le 0.9 mH
Former Material Glass Fibre (11.61x12.36x6.89 in) Service kit LF RCK008HCX51-8
Winding Depth 17.0 mm (0.67 in) Also available in 4 and 16 Ω, data upon request Service kit HF MMD400-8
HF UNIT 2
filter.
bcspeakers.com 87
®
ND
COAX
IALS
12CXN76
ND COAXIAL

power capacity
99 dB 45 - 18000 Hz
Hz Hz

Nom. Impedance 8Ω Diaphragm Material Polyester/Titanium Re 5.0 Ω
Overall Diameter 315 mm (12.4 in)
η0 4.1 %
Net Weight 5 kg (11 lb)
Former Material Glass Fibre (16.73x16.73x8.82 in) Service kit LF RCK12CXN76-8
Winding Depth 16.2 mm (0.64 in) Also available in 4 Ω, data upon request
Service kit HF MMD902-8
Magnetic Gap Depth 8.0 mm (0.31 in) Also available 15HCX76 (with 60°x 40° horn)
1
HF UNIT 2
Power Handling Nom. (AES)3 80 W continuous pink noise signal (6 dB crossover frequency to 20 kHz. 5
bcspeakers.com 88
®
ND
COAX
IALS
12CXN88
ND COAXIAL
Preliminary data
Single Neodymium
magnet assembly
1000 W 60°
continuous program nominal coverage Aluminium
99 dB 55 - 18000 Hz Double silicone spider

sensitivity response with optimized
compliance
Hz Hz
LF UNIT 3.2 %
Sensitivity (1W/1m)2 99 dB X max ± 8.5 mm
Power Handling Nom. (AES)3 500 W X var ± 9.0 mm
Winding Material Aluminuim Le 1.05 mH
Winding Depth 21.5 mm (0.85 in) Also available in 4 and 16 Ω, data upon request Service kit HF MMD3DTN-8M
HF UNIT 2
filter.
bcspeakers.com 89
®
ND
COAX
IALS
14CXN76
ND COAXIAL

magnet assembly
power capacity
100 dB 45 - 18000 Hz
Hz Hz

Nom. Diameter 355 mm (14 in) Fs 45 Hz
Winding Material Aluminium
Nom. Impedance 8Ω Re 5.2 Ω
Diaphragm Material Polyester/Titanium
Minimum Impedance 6.5 Ω (LF), 8.2 Ω (HF) Qes 0.29
Recommended Crossover7 1.2 kHz
Frequency Range 45 - 18000 Hz Qms 8.5
Flux Density 1.8 T
Dispersion Angle1 80° Qts 0.28
Inductance 0.11 mH
Magnet Material Neodymium Ring Vas 131 dm3 (4.63 ft3)
Waterproof cone treatment Front Side MOUNTING AND SHIPPING INFORMATION Sd 707 cm2 (109.59 in2)
LF UNIT
Bolt Circle Diameter 343 mm (13.5 in) X max ± 6 mm
Baffle Cutout Diameter 323 mm (12.7 in) X var ± 8 mm
Depth 188 mm (7.4 in) Mms 67 g
Continuous Program 800 W
Flange and Gasket Thickness 15 mm (0.59 in) Bl 18.4 T·m
Voice Coil Diameter 76 mm (3 in)
Net Weight 5.6 kg (12.35 lb) Le 1.0 mH
Winding Material Copper
Shipping Weight 7.2 kg (15.87 lb) Le 155 Hz
Flux Density 1.15 T
Former Material Glass Fibre Service kit LF RCK14CXN76-8
(19.68x19.48x10.83 in)
Winding Depth 17.0 mm (0.67 in) Service kit HF MMD902-8M
Also available 14HCX76 (with 60°x 40° horn)
Included by –6 dB down points. range from the recommended crossover frequency to 20 kHz.
HF UNIT
2
Applied RMS Voltage is set to 2.83V crossover frequency to 20 kHz. Power calculated on rated minimum
3
LF - Two hour test made with LF and HF Power calculated on rated impedance. Loudspeaker in free air.
Sensitivity (1W/1m)4 105 dB continuous pink noise signal (6 dB minimum impedance. 6
Power Handling Nom. (AES)5 80 W crest factor) within the range Fs-10Fs. 4
Applied RMS Voltage is set to 2.83V defined as 3 dB greater than the
Loudspeaker in free air. HF - Two hours 5
2 hour test made with continuous pink Nominal rating.
Continuous Program6 160 W test made with continuous pink noise noise signal (6 dB crest factor) within 7
signal (6 dB crest factor) within the the range from the recommended filter.
bcspeakers.com 90
®
ND
COAX
IALS
15HCX76
ND COAXIAL
Modified exponential
800 W 60°x 40° horn flare for improved
acoustic loading and
power capacity
controlled coverage
99 dB 40 - 18000 Hz Single Neodymium

sensitivity response magnet assembly
Hz Hz

Nom. Diameter 380 mm (15 in) Fs 38 Hz
Winding Material Aluminium
Nom. Impedance 8Ω Re 5.1 Ω
Diaphragm Material Titanium
Minimum Impedance 6.0 Ω (lf), 8.0 Ω (hf) Qes 0.3
Frequency Range 40 - 18000 Hz Qms 5.8
Flux Density 1.9 T
Dispersion Angle1 60°x40° Qts 0.28
Inductance 0.14 mH
Magnet Material Neodymium Ring Vas 246 dm3 (8.6 ft3)
Overall Diameter 393 mm (15.5 in) η0 3.7%
LF UNIT Bolt Circle Diameter 374 mm (14.7 in) X max ± 4.5 mm
Baffle Cutout Diameter 354 mm (13.94 in) X var ± 6 mm
Depth 200 mm (7.87 in) Mms 82 g
Continuous Program4 800 W
Flange and Gasket Thickness 16 mm (0.62 in) Bl 17.8 T·m
Voice Coil Diameter 76 mm (3 in)
Net Weight 5.6 kg (12.35 lb) Le 0.9 mH
Winding Material Copper
Shipping Weight 7.2 kg (15.87 lb) EBP 126 Hz
Flux Density 1.15 T
Former Material Glass Fibre (19.68x19.48x10.83 in) Service kit LF RCK15HCX76-8
Winding Depth 16.5 mm (0.65 in) Also available 15CXN76 (without horn / 80° disp) Service kit HF MMD3BTN-8
HF UNIT
2
3
continuous pink noise signal (6 dB crossover frequency to 20 kHz. 5
bcspeakers.com 91
®
ND
COAX
IALS
15CXN88
ND COAXIAL
Preliminary data
Single Neodymium
magnet assembly
1000 W 80°
continuous program nominal coverage Aluminium
99 dB 45 - 18000 Hz Double silicone spider

sensitivity response with optimized
compliance
Hz Hz
Fs 46 Hz
Nom. Diameter 380 mm (15 in) Winding Material Aluminium
Re 4.5 Ω
Nom. Impedance 8Ω Diaphragm Material Titanium
Qes 0.29
Minimum Impedance 5.8 Ω (LF), 8.5 Ω (HF) Recommended Crossover5 1.2 kHz
Qms 8.3
Frequency Range 45 - 18000 Hz Flux Density 1.75 T
Qts 0.28
Dispersion Angle1 80° Inductance 0.14 mH
Vas 137 dm3 (4.84 ft3)
Magnet Material Neodymium Ring MOUNTING AND SHIPPING INFORMATION Sd 855 cm2 (132.53 in2)
Waterproof cone treatment Front side Overall Diameter 392 mm (15.43 in) η0 4.3 %
X max ± 8 mm
Sensitivity (1W/1m)2 99 dB Baffle Cutout Diameter 354 mm (13.94 in)
X var ± 9.5 mm
Power Handling Nom. (AES)3 500 W Depth 111 mm (4.4 in)
Mms 91 g
Continuous Program4 1000 W Flange and Gasket Thickness 218 mm (8.58 in)
Bl 20.2 T·m
Voice Coil Diameter 88 mm (3.5 in) Net Weight 5.6 kg (12.35 lb)
Le 1.0 mH
Winding Material Aluminuim Shipping Weight 7.2 kg (15.87 lb)
EBP 158 Hz
Flux Density 1.2 T Shipping Box 500x495x275 mm
Winding Depth 22.0 mm (0.87 in) Also available in 4 and 16 Ω, data upon request Service kit HF MMD3DTN-8M
1
HF UNIT 2
Continuous Program4 160 W filter.
Loudspeaker in free air. rated minimum impedance.
bcspeakers.com 92
FE
HF
DRIV
ERS
B&C Speakers has levels, and creates

been a market leader a smooth top end
in compression driver response. HT Polyester
technology for decades. provides superior power
Our reliability and handling and higher
performance is second output levels in the
to none. We continue upper octave ranges.
to work with a wide
variety of materials to
further improve the
performance of our HF Standard features in
devices. Through our our compression drivers
modeling programs we include copper shorting
are able to analyze every rings, FEA optimized
aspect of the driver, and phase plugs and edge-
study the impact of key wound, copper-clad,
components on each aluminium voice coil
design. (CCAW) wire.
We use four different

diaphragm materials:
Mylar, pure Titanium,
Polyimide, and High
Temperature (HT)
Polyester. Each material
has its own unique
benefits and qualities.
Mylar allows for an
exceptionally smooth
transient response.
Pure Titanium provides
superb power handling
and excellent reliability
in the field. Polyimide
achieves very high power
handling and sensitivity
bcspeakers.com 93
®
FE
HF
DRIV
ERS
FE HF DRIVER
DE10
40 W 25 mm (1 in) 1"
continuous program aluminium voice coil horn throat
power capacity diameter
107 dB 1500 - Polyester

sensitivity diaphragm
18000 Hz
response
Hz Hz
SPECIFICATIONS 1 MOUNTING AND SHIPPING INFORMATION

Throat Diameter 25 mm (1 in) Frequency Range 1.5 - 18 kHz Two M5 holes 180° on 76 mm (3 in) diameter
Nominal Impedance 8Ω Recommended crossover5 2.5 kHz Overall Diameter 90 mm (3.5 in)
Minimum Impedance 6.3 Ω Voice Coil Diameter 25 mm (1 in) Depth 53 mm (2.1 in)
Power Handling Winding Material CCAW (Aluminium) Net Weight (1 unit) 0.8 kg (1.8 lb)
Nominal (AES)2 20 W Inductance 0.1 mH Shipping Weight (8 units) 7.05 kg (15.54 lb)
Continuous Program3 40 W Diaphragm Material Polyester Shipping Box (8 units) 235x235x165 mm
Sensitivity (1W/1m)4 107 dB Flux Density 1.55 T (9.25x9.25x6.5 in)
Magnet Material Ferrite Ring Replacement Diaphragm MMD010-8
Also available in 16 Ω, data upon request 1

Driver mounted on B&C ME 10 horn. 3
2
2 hour test made with continuous pink defined as 3 dB greater than the 5
noise signal (6 dB crest factor) within Nominal rating. filter.
the specified range. Power calculated 4
on rated minimum impedance. for 8 ohms Nominal Impedance.
bcspeakers.com 94
®
FE
HF
DRIV
ERS
FE HF DRIVER
DE12
50 W 36 mm (1.4 in) 1"


18000 Hz
response
Hz Hz

Minimum Impedance 7.8 Ω Voice Coil Diameter 36 mm (1.4 in) Depth 49 mm (2 in)
Power Handling Winding Material CCAW (Aluminium) Net Weight (1 unit) 1 kg (2.2 lb)
Nominal (AES)2 25 W Inductance 0.14 mH Shipping Weight (8 units) 8.9 kg (20 lb)
Magnet Material Ferrite Ring Replacement Diaphragm MMD012-8

Driver mounted on B&C ME 45 horn. impedance. for 8 ohms and 4V for 16 ohms
Also available DE12TC (Titanium diaphragm) 2
2 hour test made with continuous 3
Power on Continuous Program is Nominal Impedance. Average SPL
pink noise signal (6 dB crest factor) defined as 3 dB greater than the from 2000 to 18000 Hz.
within the specified range. Power Nominal rating. 5
calculated on rated minimum 4
Applied RMS Voltage is set to 2.83 V filter.
bcspeakers.com 95
®
FE
HF
DRIV
ERS
DE14TN
FE HF DRIVER
60 W 36 mm (1.4 in) 1"

105 dB 1500 - Titanium

18000 Hz
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover5 2.2 kHz Three M6 holes 120° on 57 mm (2.2 in) diameter
Minimum Impedance 7.4 Ω Voice Coil Diameter 36 mm (1.4 in) Overall Diameter 90 mm (3.5 in)
Power Handling Winding Material CCAW (Aluminium) Depth 49 mm (2 in)
Nominal (AES)2 30 W Inductance 0.14 mH Net Weight (1 unit) 1.1 kg (2.4 lb)
Continuous Program3 60 W Diaphragm Material Titanium Shipping Weight (8 units) 9.4 kg (20.7 lb)
Sensitivity (1W/1m)4 105 dB Flux Density 1.45 T Shipping Box (8 units) 235x235x165 mm
Magnet Material Ferrite Ring (9.25x9.25x6.5 in)
Replacement Diaphragm MMD014TN-8

Power on Continuous Program is Nominal Impedance. Average SPL from
Also available DE 14 (Polyester diaphragm) 2
2 hour test made with continuous pink defined as 3 dB greater than the 2000 to 18000 Hz.
noise signal (6 dB crest factor) within Nominal rating. 5
on rated minimum impedance. for 8 ohms and 4V for 16 ohms
bcspeakers.com 96
®
FE
HF
DRIV
ERS
FE HF DRIVER
DE160
80 W 44 mm (1.7 in) 1"


18000 Hz
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover5 2 kHz Overall Diameter 102 mm (4 in)
Minimum Impedance 7.4 Ω Voice Coil Diameter 44 mm (1.7 in) Depth 61 mm (2.4 in)
Replacement Diaphragm MMDDE160-8

2
Also available DE200 (Titanium Diaphragm)
bcspeakers.com 97
®
FE
HF
DRIV
ERS
FE HF DRIVER
DE180
120 W 44 mm (1.7 in) 1"

106.5 dB 1000 - Polyimide

17000 Hz
response
Hz Hz

Throat Diameter 25 mm (1 in) Frequency Range 1 - 17 kHz Two M6 holes 180° on 76 mm (3 in) diameter
Nominal Impedance 8Ω Recommended crossover 5 2 kHz Overall Diameter 102 mm (4.0 in)
Continuous Program3 120 W Diaphragm Material Polyimide Shipping Box (8 units) 235x235x165 mm
Sensitivity (1W/1m)4 106.5 dB Flux Density 1.35 T (9.25x9.25x6.5 in)

Power on Continuous Program is Impedance. Average SPL from 1500 to
Also available DE 200 (Titanium Diaphragm) 2
Hours test made with continuous pink defined as 3 dB greater than the 18000 Hz.
noise signal (6 dB crest factor) within Nominal rating. 5
12 dB/oct. or higher slope high-pass filter.
Applied RMS Voltage is set to 2.83 V for Also available in the Polyester version:
on rated minimum impedance. 8 ohms and 4V for 16 ohms Nominal DE160
bcspeakers.com 98
®
FE
HF
DRIV
ERS
FE HF DRIVER
DE250
120 W 44 mm (1.7 in) 1"

108.5 dB 1000 - Polyimide

18000 Hz
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover 5 1.6 kHz Three M6 holes 120° on 57 mm (2.2 in) diameter
Minimum Impedance 7.8 Ω Voice Coil Diameter 44 mm (1.7 in) Overall Diameter 120 mm (4.7 in)
Power Handling Winding Material CCAW (Aluminium) Depth 62 mm (2.4 in)
Continuous Program3 120 W Diaphragm Material Polyimide Shipping Weight (4 units) 8.75 Kg (19.3 lb)
Sensitivity (1W/1m)4 108.5 dB Flux Density 1.85 T Shipping Box (4 units) 265x135x170 mm
Magnet Material Ferrite Ring (10.43x5.31x6.69 in)


Driver mounted on B&C ME 45 horn. impedance. V for 8 ohms Nominal Impedance.
Also available DE250TN (Titanium Diaphragm) 2
Power on Continuous Program is Average SPL from 1600 to 16000
pink noise signal (6 dB crest factor) defined as 3 dB greater than the Hz.
12 dB/oct. or higher slope high-
Applied RMS Voltage is set to 2.83 pass filter.
bcspeakers.com 99
®
FE
HF
DRIV
ERS
DE618TN
FE HF DRIVER
Titanium
diaphragm
Ferrite magnet
160 W 65 mm (2.5 in) assembly with
continuous program aluminium voice coil shorting copper
power capacity cap
108 dB 1000 - 1.4”

sensitivity horn throat
18000 Hz diameter
response
Hz Hz

Throat Diameter 36 mm (1.4 in) Frequency Range 1 - 18 kHz Two M6 holes 90° on 102 mm (4 in) diameter
Continuous Program3 160 W Diaphragm Material Titanium Shipping Box (2 units) 210x210x190 mm

2
bcspeakers.com 100
®
FE
HF
DRIV
ERS
DE60TN
FE HF DRIVER
220 W 75 mm (3 in) 1.4"

107 dB 1000 - Shorting coppercap for

sensitivity extended HF response
18000 Hz
response
Hz Hz

Throat Diameter 36 mm (1.4 in) Frequency Range 1 - 18 kHz Four M6 holes 90° on 102 mm (4 in) diameter
Power Handling Winding Material CCAW (Aluminium) Net Weight (1 unit) 4.1 kg (9 lb)
Replacement Diaphragm MMD3BTN-8M

Driver mounted on B&C ME 90 horn. crossover frequency to 20 kHz. Nominal rating.
2
2 hour test made with continuous Power calculated on rated minimum 4
pink noise signal (6 dB crest factor) impedance. for 8 ohms Nominal Impedance.
within the range from the 3
recommended defined as 3 dB greater than the filter.
bcspeakers.com 101
®
FE
HF
DRIV
ERS
DE82TN
FE HF DRIVER
220 W 75 mm (3 in) 1.4"

106.5 dB 500 - Titanium diaphragm

sensitivity
18000 Hz Shorting copper cap for
response
Hz Hz

Throat Diameter 36 mm (1.4 in) Frequency Range 0.5 - 18 kHz Four M6 holes 90° on 102 mm (4 in) diameter
Nominal Impedance 8Ω Recommended crossover 5 1.0 kHz Overall Diameter 170 mm (6.7 in)
Replacement Diaphragm MMD3ATN-8

Driver mounted on B&C ME 90 horn. calculated on rated minimum 4
2
2 hour test made with continuous pink impedance. for 8 ohms Nominal Impedance.
Also available DE85 (Polyester/Titanium Diaphragm) noise signal (6 dB crest factor) within 3
the range from the recommended defined as 3 dB greater than the filter.
crossover frequency to 20 kHz. Power Nominal rating.
bcspeakers.com 102
®
FE
HF
DRIV
ERS
DE90TN
FE HF DRIVER
220 W 75 mm (3 in) 1.4"


sensitivity
18000 Hz Shorting copper cap for
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover 5 1 kHz Overall Diameter 170 mm (6.7 in)
Magnet Material Ferrite Ring Replacement Diaphragm MMD3DTN-8M

Driver mounted on B&C ME 90 horn. impedance. for 8 ohms Nominal Impedance.
Also available DE95TN (with 50 mm/2.0 in exit) 2
Power on Continuous Program is Average SPL from 1000 to 18000
pink noise signal (6 dB crest factor) defined as 3 dB greater than the Hz.
bcspeakers.com 103
®
FE
HF
DRIV
ERS
DE85TN
FE HF DRIVER
220 W 75 mm (3 in) 2"

107 dB 500 - 18000 Titanium diaphragm

sensitivity Shorting copper cap for
Hz extended HF response
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover5 1 kHz Overall Diameter 170 mm (6.7 in)
Magnet Material Ferrite

2
Also available DE85 (Polyester/Titanium Diaphragm) pink noise signal (6 dB crest factor) defined as 3 dB greater than the from 1000 to 18000 Hz.
bcspeakers.com 104
®
FE
HF
DRIV
ERS
DE750TN
FE HF DRIVER
220 W 75 mm (3 in) 2"


sensitivity Shorting copper cap for
18000 Hz extended HF response
response
Hz Hz

Throat Diameter 50 mm (2 in) Frequency Range 0.5 - 18 kHz Four M6 holes 90° on 102 mm (4 in) diameter
Power Handling Winding Material CCAW (Aluminium) Net Weight 6.3 kg (13.9 lb)
Nominal (AES)2 110 W Inductance 0.14 mH Shipping Weight 6.5 kg (14.3 lb)
Continuous Program3 220 W Diaphragm Material Titanium Shipping Box 190x190x120 mm

Driver mounted on B&C ME75 horn. impedance. for 8 ohms Nominal Impedance.
2
within the specified range. Power Nominal rating. filter.
bcspeakers.com 105
ND
HF
DRIV
ERS
B&C Speakers has been components on each feature a robust

a leader in compression design. titanium diaphragm
driver technology that incorporates next
for decades, and is We use four different generation surround
now a market leader diaphragm materials: geometry, together with
in the development Mylar, pure Titanium, a brand new, optimized
of neodymium Polyimide and High phase plug. Significant
compression drivers Temperature (HT) research has yielded
for the professional Polyester. Each material a new coil former that
audio market. We are has its own unique solidifies the diaphragm
constantly advancing the benefits and qualities. with negligible increase
science of high frequency Mylar allows for an in mass. The result is
driver development and exceptionally smooth improved high frequency
adding new products transient response. Pure linearity and reduced
to our range. The Titanium provides superb distortion. They represent
use of Neodymium power handling and an excellent solution for
magnets in our high excellent reliability in the two-way point source
frequency drivers has field. Polyimide achieves enclosures, as well as for
not only allowed us to very high power handling mounting a waveguide
dramatically reduce the and sensitivity levels, horn in multi-driver line
size and weight, but also and creates a smooth array systems.
to improve performance top end response. HT
and overall value. Polyester provides
superior power handling
and higher output levels
in the upper octave
Our reliability and ranges.
performance is second
to none. We continue The updated range
to work with a variety of bent voice-coil
of materials to further former high frequency
improve performance. drivers are particularly
Through our modeling noteworthy. The
programs we are able DE680TN, DE880TN,
to analyze every aspect DE980TN, DE990TN
of the driver, and study and DE1090TN high
the impact of key frequency drivers
bcspeakers.com 106
®
ND
HF
DRIV
ERS
ND TWEETER
DE35
50 W 3500 - 18000 Hz
continuous program response
power capacity
108 dB Neodymium magnet

sensitivity assembly
Hz Hz

Nominal Impedance 8Ω Frequency Range 3.5 - 18 kHz Three M4 holes 120° on 91 mm (3.6 in) diameter
Minimum Impedance 7Ω Recommended crossover 4 5 kHz Overall Diameter 100 mm (4 in)
Power Handling Voice Coil Diameter 32 mm (1.25 in) Depth 46 mm (1.8 in)
Nominal (AES)1 25 W Winding Material CCAW (Aluminium) Net Weight (1 unit) 0.7 kg (1.5 lb)
Continuous Program2 50 W Inductance 0.1 mH Shipping Weight (8 units) 6.1 kg (13.4 lb)
Sensitivity (1W/1m)3 108 dB Diaphragm Material Polyester Shipping Box (8 units) 235x235x165 mm
Flux Density 1.3 T (9.25x9.25x6.5 in)
Replacement Diaphragm MMD035-8
1
Two hour test made with continuous impedance. Loudspeaker in free air. 3
pink noise signal (6 dB crest factor) 2
Power on Continuous Program is for 8 ohms Nominal Impedance.
within the range Fs-10Fs. Power defined as 3 dB greater than the 4
calculated on rated minimum Nominal rating. filter.
bcspeakers.com 107
®
ND
HF
DRIV
ERS
ND HF DRIVER
DE7
20 W 25 mm (1 in) 3/4"

18000 Hz
response
Hz Hz

Throat Diameter 19 mm (0.75 in) Frequency Range 2 - 18 kHz Two M4 holes 180° on 53 mm (2.1 in) diameter
Nominal Impedance 8Ω Recommended Crossover5 2.5 kHz Overall Diameter 62 mm (2.4 in)
Continuous Program3 20 W Diaphragm material Polyester Shipping Box (8 units) 130x110x90 mm

Driver mounted on B&C ME7 horn. impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
Also available DE5 with 51 mm (0.5 in) exit 2
within the range Fs-10Fs. Power Nominal rating. filter.
Applied RMS Voltage is set to 2.83V
bcspeakers.com 108
®
ND
HF
DRIV
ERS
ND HF DRIVER
DE110
Ultra Compact
50 W 36 mm (1.4 in) 60 mm diameter
power capacity HT Polymer diaphragm
106 dB 2000 - 18000 Hz 1"

sensitivity response horn throat
diameter
Hz Hz

Throat diameter 25 mm (1.0 in) Frequency Range 2 - 18 kHz Two M5 holes 180° on 52 mm (2.05 in) diameter
Minimum Impedance 8Ω Voice Coil Diameter 36 mm (1.4 in) Depth 35 mm (1.38 in)
Nominal (AES)2 25 W Inductance 0.14 mH Shipping Weight (8 units) 4 kg (8.82 lb)
Continuous Program3 50 W Diaphragm Material HT Polymer Shipping Box (8 units) 235x235x165 mm

Driver mounted on B&C ME 45 horn. impedance. Loudspeaker in free air. for 8 ohms Nominal Impedance.
2
pink noise signal (6 dB crest factor) defined as 3 dB greater than the filter.
within the range Fs-10Fs. Power Nominal rating.
bcspeakers.com 109
®
ND
HF
DE400TN
DRIV
ERS
ND HF DRIVER
Titanium
diaphragm
Compact Neodymium
magnet assembly
100 W 44 mm (1.7 in) with shorting copper
continuous program aluminium voice coil cap for extended
106 dB 1200 - 1"

18000 Hz diameter
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover 5 1.5 kHz Overall Diameter 85 mm (3.3in)

Also available DE400 (Polyimide Diaphragm) 2
within the range Fs-10Fs. Power Nominal rating. filter.
bcspeakers.com 110
®
ND
HF
DRIV
ERS
ND HF DRIVER
DE502
Titanium
diaphragm
Shorting copper
cap for extended
HF response
100 W 44 mm (1.7 in)
continuous program aluminium voice coil Optimized Neodymium
power capacity magnet assembly
107 dB 1000 - 1"

18000 Hz diameter
response
Hz Hz

Nominal Impedance 8Ω Recommended crossover 5 1.5 kHz Three M6 holes 120° on 57 mm (2.2 in) diameter
Minimum Impedance 7.6 Ω Voice Coil Diameter 44 mm (1.7 in) Overall Diameter 102 mm (4 in)
Power Handling Winding Material CCAW (Aluminium) Depth 51 mm (2 in)
Continuous Program3 100 W Diaphragm Material Titanium Shipping Weight (8 units) 11.85 kg (26.12 lb)
Sensitivity (1W/1m)4 107 dB Flux Density 1.9 T Shipping Box (8 units) 235x235x165 mm
Magnet Material Neodymium Ring (9.25x9.25x6.5 in)

Replacement Diaphragm MMD502-8

Driver mounted on B&C ME 45 horn. impedance. Loudspeaker in free air. for 8 ohms and 4V for 16 ohms
2
within the range Fs-10Fs. Power Nominal rating. 5
bcspeakers.com 111
®
ND
HF
DE550TN
DRIV
ERS
ND HF DRIVER
140 W 51 mm (2 in) HT Polymer

continuous program aluminium voice coil diaphragm
power capacity
108 dB 1000 - 1"

17000 Hz diameter
response
Hz Hz



Also available DE550 (HT Polymer Diaphragm) 2
bcspeakers.com 112
®
ND
HF
DE680TN
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
160 W 65 mm (2.5 in)
continuous program CCAW voice coil Titanium
power capacity diaphragm
108 dB 1000 - 1.4"

18000 Hz diameter
response
Hz Hz


2
bcspeakers.com 113
®
ND
HF
DE880TN
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
220 W 75 mm (3 in)
continuous program aluminium voice coil Titanium
108 dB 500 - 18000 Hz 1.4"

diameter
Hz Hz

Minimum Impedance 8.1 Ω Voice Coil Diameter 75 mm (3 in) Depth 54.4 mm (2.1 in)
Replacement Diaphragm MMD3DTN-8M

2
Power on Continuous Program is Nominal Impedance. Average SPL from
pink noise signal (6 dB crest factor) defined as 3 dB greater than the 1000 to 18000 Hz.
bcspeakers.com 114
®
ND
HF
DE980TN
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
220 W 75 mm (3 in)
108.5 dB 500 - 18000 Hz 1.4"

diameter
Hz Hz

Minimum Impedance 8.1 Ω Voice Coil Diameter 75 mm (3.0 in) Depth 54.5 mm (2.1 in)

Also available DE985TN (2" exit) 2
bcspeakers.com 115
®
ND
HF
DE990TN
DRIV
ERS
ND HF DRIVER

continuous program aluminium voice coil assembly with
power capacity shorting copper cap
107.5 dB 500 - 18000 Hz 1.4"

diameter
Hz Hz

Magnet Material Neo Inside Ring
Replacement Diaphragm MMD35ETN-8M

Driver mounted on B&C ME90 horn impedance. Loudspeaker in free air. for 8 ohms and 4V for 16 ohms
2
bcspeakers.com 116
®
ND
HF
DE885TN
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
220 W 75 mm (3 in)
108.5 dB 800 - 18000 Hz 2"

diameter
Hz Hz

Minimum Impedance 8Ω Voice Coil Diameter 75 mm (3 in) Depth 89 mm (3.5 in)

2
bcspeakers.com 117
®
ND
HF
DE910TN
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
220 W 75 mm (3 in)
108.5 dB 500 - 18000 1.3"

Hz diameter
response
Hz Hz

Throat Diameter 33 mm (1.3 in) Frequency Range 0.5 - 20 kHz Two M4 holes 90° on 102 mm (4 in) diameter
Nominal Impedance 8Ω Recommended Crossover5 1.2 kHz Overall Diameter 131 mm (5.2 in)
Nominal (AES)2 110 W Inductance 0.14 mH Shipping Weight (4 units) 10.2 Kg (22.49 lb)
Continuous Program3 220 W Diaphragm material Titanium Shipping Box (4 units) 295x160x180 mm

Driver mounted on B&C ME90 horn. 3
2
Two hour test made with continuous defined as 3 dB greater than the filter.
pink noise signal (6 dB crest factor) Nominal rating.
within the range Fs-10Fs. Power 4
Applied RMS Voltage is set to 2.83V
calculated on rated minimum for 8 ohms Nominal Impedance.
impedance. Loudspeaker in free air.
bcspeakers.com 118
®
DE1080TN
ND
HF
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
280 W 100 mm (4 in)
109 dB 500 - 20000 Hz 1.5"

diameter
Hz Hz

Nominal (AES)2 140 W Inductance 0.18 mH Shipping Weight 3.7 kg (8.1 lb)
Continuous Program3 280 W Diaphragm Material Titanium Shipping Box 190x190x100 mm

Driver mounted on B&C ME90 horn. impedance. Loudspeaker in free air. for 8 ohms and 4V for 16 ohms
Also available DE1085TN (2" exit) 2
bcspeakers.com 119
®
DE1090TN
ND
HF
DRIV
ERS
ND HF DRIVER
Neodymium magnet
assembly with
shorting copper cap
240 W 100 mm (4 in)
108 dB 500 - 20000 Hz 1.4"

diameter
Hz Hz

Magnet Material Neo Inside Ring
Replacement Diaphragm MMD4CTN-8M

2
bcspeakers.com 120
LINE
ARR
A Y
S O U
RCES
Over the last decades, acoustic lenses create

there has been a a well-behaved phase-
dramatic shift towards coherent wavefront up to
line arrays in the 15 kHz, and offer a very
professional arena. This high Active Radiating
has emphasized the Factor. Our engineering
importance of a superior team has performed all
high frequency horn and of the critical tests to
driver combinations. ensure that each aspect
B&C’s high frequency of line array performance
drivers have long been has been carefully
considered the industry considered. The WGX and
standard, but line WG series are available
array systems require as a complete assembly,
controlled coverage combined with a wide
patterns. We have variety of our 1” and
researched many aspects 1.4” exit high frequency
of line array waveguides, drivers.
and are proud to
offer our customers a
complete series of high
frequency solutions for
line array systems.
The WGX and WG series

are based on our state
of the art neodymium
compression drivers
coupled to a proprietary
waveguide. These
specially designed
bcspeakers.com 121
®
LINE ARRAY SOURCE
LINE
ARR
A Y
S O U
WG400
RCES
Line Array optimized

Waveguide with
DE400 driver
Polyimide diaphragm
100 W 44 mm (1.7 in)
continuous program aluminium voice coil Compact Neodymium
power capacity magnet assembly
108.5 dB 1200 - 140°

sensitivity max horizontal
18000 Hz coverage
response
SPECIFICATIONS SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM
Horizontal Coverage 140° max

Active Radiating Factor 92.5 %
Waveguide Material Cast Aluminium
Nominal Impedance 8Ω
Minimum Impedance 7.7 Ω
Power Handling
Nominal (AES)2 50 W
Hz Hz
Sensitivity (1W/1m)4 108.5 dB
Frequency Range5 1.2 - 18 kHz
Voice Coil Diameter 44 mm (1.7 in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency
180° 180°
Winding Material Aluminium 150° 150°
Inductance 0.18 mH 120° 120°
Diaphragm Material Polyimide 90° 90°
60° 60°
Flux Density 1.8 T 30° 30°
Magnet Material Neodymium Ring 0° 0°
30° 30°
60° 60°
MOUNTING AND SHIPPING 90° 90°
INFORMATION 120° 120°
150° 150°
Waveguide Baffle 180° 180°
102x25 mm (4x1 in)

2 5 10 16 2 5 10 16
Cutout
Driver diameter 86 mm (3.3 in)
Dimensions 111x87x155 mm
(4.4x3.5x6.1 in) 1
12 dB/oct. or higher slope high-pass mended crossover frequency to 20 4
Net Weight 1.3 kg (2.9 lb) filter. Driver mounted on B&C ME 90 kHz. Power calculated on rated mini- for 8 ohms and 4V for 16 ohms
horn. mum impedance. Nominal Impedance. Average SPL
Shipping Weight 1.35 kg (3.0 lb) 2
Power on Continuous Program is from 1000 to 18000 Hz.
Shipping Box 120x95x180 mm pink noise signal (6 dB crest factor) defined as 3 dB greater than the 5
Waveguide mounted on 90° x 10°
(4.7x3.7x7.1 in) within the range from the recom- Nominal rating. bell horn.
bcspeakers.com 122
®
WGX880TN
LINE ARRAY SOURCE
LINE
ARR
A Y
S O U
RCES

Waveguide with
DE880TN driver
Titanium diaphragm
continuous program aluminium voice coil assembly with
power capacity shorting copper cap
108 dB 500 - 17000 Hz 120°

sensitivity response max horizontal
coverage
Horizontal Coverage 120 ° max

Minimum Impedance 8.1 Ω
Power Handling
Nominal (AES)2 110 W
Hz Hz
Frequency Range5 0.5 - 17 kHz
Voice Coil Diameter 75 mm (3 in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency
180° 180°
Winding Material CCAW 150° 150°
Diaphragm Material Titanium 120° 120°
60° 60°
Magnet Material Neodymium Ring 30° 30°
0° 0°
60° 60°
150° 150°
Cutout 153x25 mm (6x1 in) 180° 180°
124 mm (4.9 in)

2 5 10 16 2 5 10 16
Driver diameter
(6.4x5.1x9.3 in)
Shipping Weight 3.2 kg (7.05 lb) 1
12 dB/oct. Or higher slope high-pass mended crossover frequency to 20 Nominal rating.
Shipping Box 245x140x175 mm filter. kHz. Power calculated on rated mini- 4
2
Two hour test made with continuous mum impedance. for 8 ohms Nominal Impedance.
(9.6x5.5x6.9 in) pink noise signal (6 dB crest factor) 3
within the range from the recom- defined as 3 dB greater then the bell horn.
bcspeakers.com 123
®
WGX1090TN
LINE ARRAY SOURCE
LINE
ARR
A Y
S O U
RCES

Waveguide with
DE1090TN driver
Titanium diaphragm
continuous program aluminium voice coil assembly with shorting
power capacity copper cap
108 dB 500 - 18000 Hz 120°

sensitivity response max horizontal
coverage
Horizontal Coverage 120° max

Minimum Impedance 8Ω
Power Handling
Nominal (AES)2 120 W
Hz Hz
Frequency Range5 500 - 18 kHz
Voice Coil Diameter 100 mm (4.0 in) HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency
180° 180°
Winding Material CCAW 150° 150°
Inductance 0.18 mH 120° 120°
Diaphragm Material Titanium 90° 90°
60° 60°
Magnet Material Neo Inside Ring 0° 0°
30° 30°
60° 60°
150° 150°
153x25 mm (6x1 in)

2 5 10 16 2 5 10 16
Cutout
Driver diameter 127 mm (5.0 in)
(6.4x5.1x9.2 in) 1
12 dB/oct. or higher slope high-pass mended crossover frequency to 20 4
Net Weight 2.9 kg (6.39 lb) filter. Driver mounted on B&C ME 90 kHz. Power calculated on rated mini- for 8 ohms and 4V for 16 ohms
horn. mum impedance. Nominal Impedance. Average SPL
Shipping Weight 3 kg (6.61 lb) 2
Power on Continuous Program is from 1000 to 18000 Hz.
Shipping Box 245x140x175 mm pink noise signal (6 dB crest factor) defined as 3 dB greater than the 5
(9.6x5.5x6.9 in) within the range from the recom- Nominal rating. bell horn.
bcspeakers.com 124
HOR
NS
The range of B&C

electro-acoustic
systems is completed
by a series of high
frequency horns. The
range includes constant
directivity models that
are known for their
great consistency in
angular coverage, and
exponential models that
optimize acoustical load
and acoustic energy
transfer. Standardized
diameters give designers
the freedom to choose
the best driver/horn
combination for each
project.
bcspeakers.com 125
®
ME10 1"
throat entry
90°x 60°
nominal coverage
HORN
Hyperbolic Excellent loading
cosine flare down to 1.5 kHz
SPECIFICATIONS 1 6 horizontal angle 6

0°
vertical angle
330° 0 30° 330° 0 30°
Throat Diameter 25 mm (1 in) -6 -6
Nominal Coverage
-12 -12
Horizontal 90°
300°
-18
-24
60° 300°
-18
-24
60°
HOR
-30 -30
NS
Vertical 60° -36 -36
Cutoff Frequency 1.5 kHz 90° 90°
Material ABS
Dimensions 130.5x130.5x90 mm 1 kHz
2 kHz
(5.1x5.1x3.5 in) 240° 120°
4 kHz
240° 120°
8 kHz

12 kHz
210° 150°
INFORMATION 16 kHz
180°
HORIZONTAL ANGLE VERTICAL ANGLE

Four 6mm(0.25 in) holes 90° frequency
180°
frequency
180°
on 76 mm (3 in) diameter 150°
120°
150°
120°
Baffle Cutout Dimensions 101x104 mm 90° 90°
60° 60°
(4x4.1 in) 30° 30°
Net Weight (1 unit) 0.15 kg (0.33 lb)

0° 0°
30° 30°
Shipping Weight (20 units) 6 Kg (13.2 lb) 60° 60°
90° 90°
Shipping Box (20 units) 540x350x390 mm 120° 120°
150° 150°
(21.2x13.8x15.3 in) 180° 180°
2 5 10 16 2 5 10 16
1
Horn mounted on B&C DE500 compression driver.
ME20
1" 90°x 60°

throat entry nominal coverage
HORN
Excellent Exponential
loading down flare
to 1.5 kHz
SPECIFICATIONS 1 6 horizontal angle 6

0°
vertical angle
330° 0 30° 330° 0 30°
Nominal Coverage
-12 -12
-18 -18
300° 60° 300° 60°
Horizontal 90° -24 -24
-30 -30
Cutoff Frequency 1.5 kHz 90° 90°
Material Cast Aluminium

Dimensions 145x145x90 mm 1 kHz
2 kHz
(5.7x5.7x3.6 in) 240° 120°
4 kHz
240° 120°
8 kHz

12 kHz
210° 150°
INFORMATION 16 kHz
180°
HORIZONTAL ANGLE VERTICAL ANGLE

Two 6mm(0.25 in) holes 180° frequency
180°
frequency
180°
on 76 mm (3 in) diameter 150°
120°
150°
120°
60° 60°
(4.6x4.4 in) 30° 30°
Net Weight (1 unit) 0.45 kg (1 lb)

0° 0°
30° 30°
Shipping Weight (20 units) 12.0 Kg (26.4 lb) 60° 60°
90° 90°
150° 150°
(21.2x13.8x15.3 in) 180° 180°
2 5 10 16 2 5 10 16
1
bcspeakers.com 126
®
ME45 1"
throat entry
90°x 40°
nominal coverage
HORN
Exponential Excellent loading
flare down to 1 kHz
SPECIFICATIONS1 6 0°
horizontal angle
6 0°
vertical angle
330 0 30° 330° 0 30°
Nominal Coverage
-12 -12
Horizontal 90°
300°
-18
-24
60° 300°
-18
-24
60°
HOR
-30 -30 NS
Cutoff Frequency 1 kHz 90° 90°

Dimensions 310x143.5x124 mm 1 kHz
2 kHz
(12.5x5.6x4.9 in) 240° 120°
4 kHz
240° 120°
8 kHz

12 kHz
210° 150°
INFORMATION 180°
16 kHz
180°
Two 6.5 mm (0.25 in) holes 180° HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency
180° 180°
on 76 mm (3 in) diameter 150° 150°
120° 120°
(10.2x4.3 in)
60° 60°
30° 30°
Net Weight (1 unit) 0.8 kg (1.8 lb) 0°
30°
0°
30°
Shipping Weight (20 units) 4.9 Kg (10.8 lb) 60° 60°
90° 90°
(21.2x13.8x7.3 in)
150° 150°
180° 180°
2 5 10 16 2 5 10 16
1
ME90
1.4" 80°x 60°

HORN
Constant Excellent loading

directivity down to 900 Hz
SPECIFICATIONS1 6
0°
6
0°
horizontal angle vertical angle

330 0 30° 330° 0 30°
Throat Diameter 36 mm (1.4 in) -6 -6
Nominal Coverage -12
-18
-12
-18
300° 60° 300° 60°
60°
-30
Vertical
-30
-36 -36
Cutoff Frequency 900 Hz 90° 90°

270x270.5x138 mm 1 kHz
(10.6x10.6x5.4 in)
2 kHz
240° 120° 240° 120°
4 kHz
8 kHz

12 kHz
210° 150°
INFORMATION 180°
16 kHz
180°
Four 6.5 mm (0.25 in) holes 90° HORIZONTAL ANGLE frequency VERTICAL ANGLE frequency
180° 180°
on 102 mm (4 in) diameter 150° 150°
120° 120°
(8.8x8.8 in) 60°
30°
60°
30°
Net Weight 01.4 kg (3.1 lb) 0° 0°
30° 30°
Shipping Weight 1.9 Kg (4.2 lb) 60° 60°
90° 90°
Shipping Box 290x290x170 mm 120° 120°
(11.4x11.4x6.7 in) 150°
180°
150°
180°
2 5 10 16 2 5 10 16
1
bcspeakers.com 127
®
HOR
NS
ME60
HORN
2" 60°x 40°

Constant Excellent loading

directivity down to 800 Hz
SPECIFICATIONS 1
0° 0°
6
6
horizontal angle vertical angle
330° 0 30° 330° 0 30°
Nominal Coverage -12 -12

300° 60° 300° 60°
-24 -24
Cutoff Frequency 800 Hz -36 -36
Material Cast Aluminium 90° 90°
(10.6x9.3x7.9 in)
1 kHz

2 kHz 240° 120°
INFORMATION 6
0° 4 kHz
6
0°
8 kHz
330° 0 30° 330° 0 30°
Four 6.5 mm (0.25 in) holes 90° 210° -6

150° 12 kHz 210° -6 150°
on 102 mm (4 in) diameter 180° -12 16 kHz -12 180°
Baffle Cutout Dimensions 232x207 mm HORIZONTAL ANGLE

300°
-18
frequency
60°
VERTICAL ANGLE
300°
-18
60°
frequency
-24 -24
(9.1x8.1 in) -30

180°
-30
180°
150° 150°
Net Weight 1.6 kg (3.5 lb) -36
120°
-36
120°
Shipping Weight 2.2 Kg (4.8 lb) 90°

90°
90°
90°
Shipping Box 290x260x260 mm 60° 60°
30° 30°
(11.4x10.2x10.2 in) 0° 0°
30° 30°
60° 60°
240° 120° 240° 120°
1
Horn mounted on B&C DE750 compression driver. 90° 90°
120° 120°
150° 150°
210° 150° 210° 150°
180° 180°
2 5 10 16 2 5 10 16
180° 180°
bcspeakers.com 128

B&C Catalogue 2017

Uploaded by

Copyright:

Available Formats

B&C Catalogue 2017

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

B&C Catalogue 2017

Uploaded by

Copyright:

Available Formats

®

With over 70 years of industry experience,

Nevertheless, they comment

DC component XDC Force factor Bl (x)

B&C Speakers is a Our engineers have

200 W 44 mm (1.7 in)

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

240 W 38 mm (1.5 in)

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

300 W 38 mm (1.5 in)

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

400 W 44 mm (1.7 in)

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

400 W 51 mm (2 in) Shorting copper cap

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

600 W 64 mm (2.5 in) Aluminium

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

500 W 64 mm (2.5 in)

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

800 W 76 mm (3 in) Aluminium

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

500 W 64 mm (2.5 in)

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

1000 W 76 mm (3 in) Aluminium

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

1200 W 100 mm (4 in) Aluminium

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

1400 W 100 mm (4 in) Double silicone

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

95 dB 45 - 1000 Hz Ventilated voice

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

1000 W 76 mm (3 in) Aluminium

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

1400 W 100 mm (4 in) Double silicone

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

1400 W 100 mm (4 in) Double silicone

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM

SPECIFICATIONS THIELE & SMALL PARAMETERS 4 MOUNTING AND SHIPPING INFORMATION

2000 W 100 mm (4 in) Aluminium

Double silicone spider

SENSITIVITY dB SPL / watt (8 ohm load) IMPEDANCE OHM