https://www.phoenixcontact.

com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

Safe coupling relay for SIL 3 high and low demand applications, connects digital output signals to the I/O, 2
enabling current paths, 1 signal contact, module for safe state off applications, integrated test pulse filter, plug-in
screw connection, width: 17.5 mm

Your advantages
 Narrow 17.5 mm housing
 Up to SIL 3 according to IEC 61508
 Forcibly guided contacts according to EN 50205
 Easy proof test according to IEC 61508 thanks to integrated signal contact
 Long service life thanks to filtering of controller test pulses
 Two enabling current paths
 Couples digital output signals from failsafe controllers to I/O devices (valves, etc.) for electrical isolation and power adaptation

Key Commercial Data

Packing unit 1 pc

GTIN

GTIN 4046356520911
Weight per Piece (excluding packing) 180.000 g
Custom tariff number 85364900
Country of origin Germany

Technical data
Note
Utilization restriction 1

03/27/2019   Page 1 / 7
https://www.phoenixcontact.com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Technical data
Dimensions
Width 17.5 mm
Height 99 mm
Depth 114.5 mm

Ambient conditions
Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
Maximum altitude ≤ 2000 m (Above sea level)

Input data
Rated control circuit supply voltage US 24 V DC -15 % / +10 %
Rated control supply current IS typ. 55 mA
Power consumption at US typ. 1.32 W
Inrush current max. 100 mA
Typ. starting time with Us 50 ms
Typical release time 50 ms
Recovery time 1s
Operating voltage display 1 x yellow LED
Protective circuit Surge protection Suppressor diode, 33 V (A1 - A2)
Maximum switching frequency 0.5 Hz
Filter time max. 5 ms (at A1 in the event of voltage dips at Us)
max. 2 ms (Test pulse width; high test pulse at A1/A2)
≥ 100 ms (Test pulse width; high test pulse at A1/A2)
Test pulse rate = 80 x Test pulse width
max. 5 ms (Test pulse width; low test pulse at A1/A2)
≥ 50 ms (Test pulse rate; low test pulse at A1/A2)
Test pulse rate = 15 x Test pulse width

Output data
Contact type 2 enabling current paths
1 confirmation current path
Contact material AgCuNi, + 0.2 µm Au
Maximum switching voltage 250 V AC/DC (N/O contact / N/C contact, observe the load curve)
Minimum switching voltage 15 V AC/DC (N/O contact / N/C contact)
Limiting continuous current 5 A (N/O contact, pay attention to the derating)
100 mA (N/C contact)
Maximum inrush current 5 A (N/O contact)
03/27/2019   Page 2 / 7
https://www.phoenixcontact.com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Technical data
Output data
100 mA (N/C contact)
Inrush current, minimum 5 mA (N/O contact / N/C contact)
Sq. Total current 2
50 A (observe derating)
Interrupting rating (ohmic load) max. 120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
192 W (48 V DC, τ = 0 ms, N/C contact: 4.8 W)
162 W (60 V DC, τ = 0 ms, N/C contact: 6 W)
66 W (110 V DC, τ = 0 ms, N/C contact: 11 W)
60 W (220 V DC, τ = 0 ms, N/C contact: 22 W)
1250 VA (250 V AC, τ = 0 ms, N/C contact: 25 VA)
Maximum interrupting rating (inductive load) 72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
43 W (48 V DC, τ = 40 ms, N/C contact: 4.8 W)
41 W (60 V DC, τ = 40 ms, N/C contact: 6 W)
35 W (110 V DC, τ = 40 ms, N/C contact: 11 W)
48 W (220 V DC, τ = 40 ms, N/C contact: 22 W)
Switching capacity min. 75 mW
Mechanical service life 6
10x 10 cycles
Output fuse 10 A gL/gG (N/O contact)
4 A gL/gG (for low-demand applications)
150 mA Fast-blow (N/C contact)

General
Electromechanical relay with forcibly guided contacts in accordance with
Relay type
EN 50205
Nominal operating mode 100% operating factor
Net weight 186.5 g
Mounting position any
Mounting type DIN rail mounting
Degree of protection IP20
IP54
Min. degree of protection of inst. location IP54
Housing material PBT
Housing color yellow

Connection data
Connection method Screw connection
pluggable Yes
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²

03/27/2019   Page 3 / 7
https://www.phoenixcontact.com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Technical data
Connection data
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 7 mm
Screw thread M3

Safety-related characteristic data

Stop category 0
Designation IEC 61508 - High demand
3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit
Safety Integrity Level (SIL)
at A1/A2 must be ≥ 90% )
Designation IEC 61508 - Low demand
3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit
Safety Integrity Level (SIL)
at A1/A2 must be ≥ 90% )
Designation EN ISO 13849
Performance level (PL) e (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Category 4 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Designation EN 62061
3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit
Safety Integrity Level Claim Limit (SIL CL)
at A1/A2 must be ≥ 90% )
Designation EN 50156
Safety Integrity Level (SIL) 3

Standards and Regulations

Designation Air clearances and creepage distances between the power circuits
Standards/regulations DIN EN 50178/VDE 0160
Rated insulation voltage 250 V
Safe isolation, reinforced insulation 6 kV between the control circuits (A1/
Rated surge voltage/insulation
A2), (31/32), (13/14, 23/24)
Degree of pollution 2
Overvoltage category III
Shock 15g
Vibration (operation) 10 Hz ... 150 Hz, 2g
Conformance CE-compliant

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”

03/27/2019   Page 4 / 7
https://www.phoenixcontact.com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Drawings

Application drawing Circuit diagram

A1 13 23 31

0
SF
1
BATF
2
DC5V
FRCE
RUN
3
4
K1
5
RUN-P
6
STOP 7
RUN 31 32
STOP A1 A2
MRES
0
K2
1
2
3
4
5
Power
PSR-FSP/2X1

6
7

23 24
13 14 A2 14 24 32

Example of electrical isolation of a safety PLC output from the field.

Circuit diagram
24V DC

SIS / FS-PLC

24V 0V DO DO DI
0V GND

L
K1

K2

A1 13 23 31 K1

PSR-...-24DC/FSP/2X1/1X2 K2

A2 14 24 32
M

K1 24V DC

K2

Circuit diagram
24V DC

SIS / FS-PLC

24V 0V DO DO DI K1
0V GND

K2

L L
K1 K3 M
K2 K4

A1 13 23 31 A1 13 23 31

K3
PSR-...-24DC/FSP/2X1/1X2 PSR-...-24DC/FSP/2X1/1X2

A2 14 24 32 A2 14 24 32 K4

K1 24V DC K3
M

K2 K4

N N

03/27/2019   Page 5 / 7
https://www.phoenixcontact.com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Classifications
eCl@ss

eCl@ss 4.0 27371102

eCl@ss 4.1 27371102
eCl@ss 5.0 27371901
eCl@ss 5.1 27371900
eCl@ss 6.0 27371800
eCl@ss 7.0 27371819
eCl@ss 8.0 27371819
eCl@ss 9.0 27371819

ETIM

ETIM 2.0 EC001449

ETIM 3.0 EC001449
ETIM 4.0 EC001449
ETIM 5.0 EC001449
ETIM 6.0 EC001449

UNSPSC

UNSPSC 6.01 30211901

UNSPSC 7.0901 39121501
UNSPSC 11 39121501
UNSPSC 12.01 39121501
UNSPSC 13.2 39121501

Approvals
Approvals

Approvals

UL Listed / cUL Listed / Functional Safety / EAC / UL Listed / cUL Listed / EAC / Functional Safety / GL / EAC

Ex Approvals

Approval details

UL Listed 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324

03/27/2019   Page 6 / 7
https://www.phoenixcontact.com/us/products/2986960

Safety relays - PSR-SCP- 24DC/FSP/2X1/1X2 - 2986960

Approvals

cUL Listed 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324

Functional Safety 
    968/EZ 365.05/16

EAC 
    EAC-Zulassung

UL Listed 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324

cUL Listed 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324


 RU C-
EAC   
DE.A*30.B.01082

Functional Safety 
    968/EZ 365.05/16

GL 
  http://exchange.dnv.com/tari/  13979-15HH

EAC 
    EAC-Zulassung

Phoenix Contact 2019 © - all rights reserved

http://www.phoenixcontact.com

03/27/2019   Page 7 / 7