https://www.phoenixcontact.

com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

Primary-switched QUINT POWER supply for DIN rail mounting with SFB (selective fuse breaking) technology,
input: 1-phase, output: 24 V DC/10 A

Product Description
QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system
protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states
before errors occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5 V
DC ... 56 V DC are covered.

Why buy this product

Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal
current for 12 ms
For superior system availability

Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently

Preventive function monitoring

Key Commercial Data

Packing unit 1 STK
Weight per Piece (excluding packing) 1462.6 g
Custom tariff number 85044030
Country of origin Thailand

Technical data
Dimensions
Width 60 mm
Height 130 mm
Depth 125 mm
08/17/2016Page1/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Technical data
Dimensions
Width with alternative assembly 122 mm
Height with alternative assembly 130 mm
Depth with alternative assembly 63 mm

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 C ... 70 C (> 60 C Derating: 2,5 %/K)
Ambient temperature (storage/transport) -40 C ... 85 C
Max. permissible relative humidity (operation) 95 % (at 25 C, non-condensing)
Noise immunity EN 61000-6-2:2005
Maximum altitude 5000 m

Input data
Nominal input voltage range 100 V AC ... 240 V AC
110 V DC ... 250 V DC
Input voltage range 85 V AC ... 264 V AC
90 V DC ... 350 V DC (UL 508: 300 V DC)
Dielectric strength maximum 300 V AC
AC frequency range 45 Hz ... 65 Hz
Frequency range DC 0 Hz
Discharge current to PE < 3.5 mA
Current consumption 2.2 A (120 V AC)
1.3 A (230 V AC)
2.5 A (110 V DC)
1.2 A (220 VDC)
Inrush surge current < 15 A (typical)
Power failure bypass > 36 ms (120 V AC)
> 36 ms (230 V AC)
Input fuse 10 A (slow-blow, internal)
Choice of suitable circuit breakers 10 A ... 20 A (AC: Characteristics B, C, D, K)
Type of protection Transient surge protection
Protective circuit/component Varistor, gas-filled surge arrester

Output data
Nominal output voltage 24 V DC 1%
Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 VDC, constant capacity restricted)
Nominal output current (IN) 10 A (-25C ... 60C, UOUT = 24 V DC)
POWER BOOST (IBoost) 15 A (-25C...40C permanent, UOUT = 24VDC )
Selective Fuse Breaking (ISFB) 60 A (12 ms)
08/17/2016Page2/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Technical data
Output data
Derating 60 C ... 70 C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series Yes
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage 10 %)
Residual ripple < 50 mVPP (with nominal values)
Output power 240 W
Typical response time < 0.15 s
Maximum power dissipation in no-load condition 9.1 W
Power loss nominal load max. 22 W

General
Net weight 1.1 kg
Efficiency > 92.5 % (for 230 V AC and nominal values)
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Protection class I
MTBF (IEC 61709, SN 29500) > 940000 h (25 C)
> 530000 h (40C)
> 230000 h (60C)
Mounting position horizontal DIN rail NS 35, EN 60715
Alignable: 5 mm horizontally, 15 mm next to active components, 50 mm
Assembly instructions
vertically

Connection data, input

Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm
Conductor cross section solid max. 2.5 mm
Conductor cross section flexible min. 0.2 mm
Conductor cross section flexible max. 2.5 mm
Conductor cross section AWG min. 16
Conductor cross section AWG max. 12
Stripping length 7 mm
Screw thread M3

Connection data, output

Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm

08/17/2016Page3/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Technical data
Connection data, output
Conductor cross section solid max. 2.5 mm
Conductor cross section flexible min. 0.2 mm
Conductor cross section flexible max. 2.5 mm
Conductor cross section AWG min. 16
Conductor cross section AWG max. 12
Stripping length 7 mm
Screw thread M3

Connection data for signaling

Conductor cross section solid min. 0.2 mm
Conductor cross section solid max. 2.5 mm
Conductor cross section flexible min. 0.2 mm
Conductor cross section flexible max. 2.5 mm
Conductor cross section AWG min. 16
Conductor cross section AWG max. 12
Screw thread M3

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Noise emission EN 55011 (EN 55022)
Noise immunity EN 61000-6-2:2005
Connection in acc. with standard CSA
Standards/regulations EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN61000-4-6
Standard - Electrical safety IEC 60950-1/VDE 0805 (SELV)
Standard Electronic equipment for use in electrical power installations
EN 50178/VDE 0160 (PELV)
and their assembly into electrical power installations
Standard Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolation DIN VDE 0100-410
Standard Limitation of mains harmonic currents EN 61000-3-2
Standard - Equipment safety BG (design tested)
Standard - Approval for medical use IEC 60601-1, 2 x MOOP
Shipbuilding approval Germanischer Lloyd (EMC 1), ABS, LR, RINA, NK, DNV, BV
UL approvals UL Listed UL 508
UL/C-UL Recognized UL 60950-1
08/17/2016Page4/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Technical data
Standards and Regulations
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous
Location)
DeviceNet approval DeviceNet Power Supply Conformance Tested
Vibration (operation) < 15 Hz, amplitude 2.5 mm (according to IEC 60068-2-6)
15 Hz ... 150 Hz, 2.3g, 90 min.
Low Voltage Directive Conformance with LV directive 2006/95/EC
Approval - requirement of the semiconductor industry with regard to mains
SEMI F47-0706 Compliance Certificate
voltage dips
Information technology equipment - safety (CBscheme) CB Scheme
Rail applications EN 50121-4
Overvoltage category (EN 62477-1) III

Drawings

Block diagram

L (+)

active

N (-) PFC

DC OK
I < IN
13
14

08/17/2016Page5/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Application drawing

08/17/2016Page6/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Application drawing

08/17/2016Page7/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Application drawing

A1 Y1 13 23 31

B1 on B2 error K1
F1 F2 F3 F4
S1 CB E1 Logic
K2
2A 2A 6A 6A
SFB SFB
CB TM1 r r
e e
X31 on s
e
on s
e
off t off t

A2 Y2 14 24 32
33 33 33 33

X21 DC24V/60A 34 34 34 34

1+ 1+ 1+ 1+
1+
2+ 2+ 2+ 2+

3+ 3+ 3+ 3+
2+
4+ 4+ 4+ 4+

1- 1- 1- 1-
1-
2- 2- 2- 2-

3- 3- 3- 3-
2-
4- 4- 4- 4-

Classifications
eCl@ss

eCl@ss 4.0 27040702

eCl@ss 4.1 27040702
eCl@ss 5.0 27049002
eCl@ss 5.1 27049002
eCl@ss 6.0 27049002
eCl@ss 7.0 27049002
eCl@ss 8.0 27049002
eCl@ss 9.0 27040701

ETIM

ETIM 2.0 EC001039

ETIM 3.0 EC001039
ETIM 4.0 EC000599
08/17/2016Page8/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Classifications
ETIM
ETIM 5.0 EC002540

UNSPSC

UNSPSC 6.01 30211502

UNSPSC 7.0901 39121004
UNSPSC 11 39121004
UNSPSC 12.01 39121004
UNSPSC 13.2 39121004

Approvals
Approvals

Approvals

CSA / UL Recognized / UL Listed / cUL Recognized / LR / BV / ABS / NK / RINA / BSH / IECEE CB Scheme / SEMI F47 / Bauartgeprft / EAC /
DeviceNet / EAC / DNV GL / cULus Recognized

Ex Approvals

UL Listed / cUL Listed / cULus Listed

Approvals submitted

Approval details

CSA

UL Recognized

UL Listed

08/17/2016Page9/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Approvals

cUL Recognized

LR

BV

ABS

NK

RINA

BSH

IECEE CB Scheme

SEMI F47

Bauartgeprft

EAC

DeviceNet

EAC

DNV GL

cULus Recognized

08/17/2016Page10/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Accessories
Accessories
Assembly adapter

Assembly adapters-UWA 182/52-2938235

Assembly adapters-QUINT-PS-ADAPTERS7/2-2938206

Assembly adapter for QUINT POWER 10A on S7-300 rail

Fan

Fan-QUINT-PS/FAN/4-2320076

The fan for QUINT-PS/1AC and .../3AC can be mounted without the need for tools or other accessories. By using the fan,
optimum cooling is ensured at high ambient temperatures or if the mounting position is rotated.

Mounting rail adapter

Electronic housing-UTA 107-2853983

Universal DIN rail adapter

Redundancy module

08/17/2016Page11/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Accessories

Diode-QUINT-DIODE/12-24DC/2X20/1X40-2320157

DIN rail diode module 12-24 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.

Redundancy module, with protective coating-QUINT-ORING/24DC/2X10/1X20-2320173

Active QUINT redundancy module for DIN rail mounting with ACB (auto current balancing) technology and monitoring
functions, input: 24 V DC, output: 24 V DC/2 x 10 A or 1 x 20 A, including mounted UTA 107/30 universal DIN rail adapter

Redundancy module-TRIO-DIODE/12-24DC/2X10/1X20-2866514

Redundancy module with function monitoring, 12-24 V DC, 2x 10 A, 1x 20 A

Thermomagnetic device circuit breakers

Thermomagnetic device circuit breaker-CB TM1 1A SFB P-2800836

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.

Thermomagnetic device circuit breaker-CB TM1 2A SFB P-2800837

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.

08/17/2016Page12/13
https://www.phoenixcontact.com/us/products/2866763

Power supply unit-QUINT-PS/1AC/24DC/10-2866763

Accessories

Thermomagnetic device circuit breaker-CB TM1 3A SFB P-2800838

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.

Thermomagnetic device circuit breaker-CB TM1 4A SFB P-2800839

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.

Thermomagnetic device circuit breaker-CB TM1 5A SFB P-2800840

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.

Phoenix Contact 2016 - all rights reserved

http://www.phoenixcontact.com

08/17/2016Page13/13