Águila Amigurumi
Águila Amigurumi
Águila Amigurumi
The abbreviations I use in this pattern are the ones I use when I write or transcript crochet dolls patterns, here’s the
translation
BODY (CHOCOLATE BROWN) Wings pattern: Make two. Start with chocolate string in drawing
A (each round is marked in a different color). Fold the work in
Magic ring 6sc (6); half (marked with the dotted line) and continue working with
(2X Inc., 1sc) X 2 (10); drawing B.
HEAD (WHITE)
Magic ring 6sc (6);
(2X Inc., 1sc) X 2 (10);
2X Inc., 8sc (12);
1sc, 2X Inc., 9sc (14);
8sc, 2 X Dec., 2sc (12);
1X 12sc = 12sc (12);
(5sc, Inc.) X 2 (14);
1X 14sc = 14sc (14);
(6sc, Inc.) X 2 (16);
1X 16sc = 16sc (16); Ch1, T., 6sc, 2hdc, 4dc, 2 X dc, 2 X dc;
F.O. Ch3, T., 2X dc, 1dc, 1hdc, 8sc;
T., 3sc, 1hdc, 5dc;
WINGS make two (CHOCOLATE BROWN AND WHITE) Add white:
Begin with chocolate; this piece is not made in rounds: Ch4, T., 2Xtr, 1htr, 1dc, 1hdc, 3sc, 2slst;
Magic ring 6sc (6sc); Add chocolate and work in the same direction as you
Ch3, T., dc in the same stitch, dc, 2Xdc, dc, 2xdc (7);the were working. Do not cut the white string, we will use
last stitch will be left unworked you can follow these it to finish the white feathers:
instructions from the drawings A and B…
3slst, 2sc, 1hdc, 1dc, 1tr., 2 X tr. (until the edge), F.O. Sew the beak in place and embroider to each side of
the chocolate string and leave a big tail. the face the beak’s extensions.
Go back to the place where you add the chocolate and
left the uncut white string, insert your hook in the last Using the white string from the embroidered feathers,
white stitch of the last round, pull the white string place the needle at the top of the head, aligned with
through and turn. We will make one more round in one end of the beak, and embroider the eyebrow
the direction of the end of the white feathers: making stitches in all the front of the head until you
5slst, 2sc, 2dc, 1tr; reach the alignment with the other end of the beak.
F.O.
TAIL (WHITE)
This piece is not made in a spiral:
Ch8, 5tr starting from the 4th chain from hook;
Ch3, T., [3x tr (popcorn stitch), Ch1] X 5;
Ch3, T., [3x tr (popcorn stitsh), Ch1] X 5;
T., [3X tr (popcorn stitch), Ch1] X 3, 1tr;
F.O.
BEAK (ORANGE)
This piece is not made in a spiral:
Ch5, 4sc starting from the 2nd chain from hook;
Ch1, T., 2X Dec.;
Ch1, T., 2sc;
T., 1sc;
F.O. flatten and sow the ends together shaping the
beak as you go along.
ASSEMBLAGE For the eyes I used two yellow beads that were
attached to the head by a black string with a knot. Use
Stuff the body and head lightly and assemble the two the remaining black string to embroider the contour
pieces making sure you center the head and body of the eyes (see picture above).
properly. Use the white string that is left to embroider
the neck feathers (see picture). For the feet I used wire to make the claws and ankles
struture, and covered it with orange string rolled
around the wire and glued with white glue and water
(white glue, normaly used for wood, becames
transparent when dry). Don’t forget to leave a piece
of bare wire in each feet, and a long orange string tail.
After the glue is dry and with the help os plyers bend
the end of each claw to make the nails and paint them
with black watercolor. Sew the legs in place by
inserting the bare wire in the body and using the
Do not cut the white string. We are using it to make orange string to fix them.
the eyebrow.
Sew the tail in place positioning it to reach the floor.
Then assemble the wings putting them in a position
where it gives the illusion of a larger chest and resting
the white feathers end on top of the tail like it’s
shown in the pictures below.
http://www.facebook.com/oatelier56
Ana Casals