Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    V2 8TC

    Uploaded by

    Miguel Rojas
    This document provides test specifications and setting values for an injection pump, including: - Beginning of delivery test pressure of 26.0 bar with a tolerance of 1.0 bar - Delivery quantity per 1000 strokes of 208.0 cm3 with a tolerance of 1.0 cm3 at a rated speed of 1150 rpm - Guide sleeve position at various rated speeds between 300-1370 rpm with tolerances of 0.1-0.5 mm

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    V2 8TC

    Uploaded by

    Miguel Rojas
    80 views2 pages
    This document provides test specifications and setting values for an injection pump, including: - Beginning of delivery test pressure of 26.0 bar with a tolerance of 1.0 bar - Delivery quantity per 1000 strokes of 208.0 cm3 with a tolerance of 1.0 cm3 at a rated speed of 1150 rpm - Guide sleeve position at various rated speeds between 300-1370 rpm with tolerances of 0.1-0.5 mm

    Original Description:

    DATO

    Original Title

    V2-8TC

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides test specifications and setting values for an injection pump, including: - Beginning of delivery test pressure of 26.0 bar with a tolerance of 1.0 bar - Delivery quantity per 1000 strokes of 208.0 cm3 with a tolerance of 1.0 cm3 at a rated speed of 1150 rpm - Guide sleeve position at various rated speeds between 300-1370 rpm with tolerances of 0.1-0.5 mm

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    80 views2 pages

    V2 8TC

    Uploaded by

    Miguel Rojas
    This document provides test specifications and setting values for an injection pump, including: - Beginning of delivery test pressure of 26.0 bar with a tolerance of 1.0 bar - Delivery quantity per 1000 strokes of 208.0 cm3 with a tolerance of 1.0 cm3 at a rated speed of 1150 rpm - Guide sleeve position at various rated speeds between 300-1370 rpm with tolerances of 0.1-0.5 mm

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    BOSCH INJ.

    PUMP TEST SPECIFICATIONS (A) INJECTION PUMP SETTING VALUES


    Set equal delivery quant.
    Edition : 1995. 02. 17. per values__________
    Test oil : ISO 4113
    BEGINNING OF DELIVERY
    Combination No. : 0 402 648 974
    Test pressure bar : 26.0
    Injection pump Tolerance bar : ← 1.0
    Pump combination : PE8P120A320LS7875
    EP type number : 0 412 628 881 Prestroke mm : 5.20
    Tolerance mm : ← 0.05
    Governor
    Governor design : RQ250/1150PA1122 test only : ← 0.10
    Governor No. : 0 421 801 704
    Rack travel in mm : 16.00
    Customer-spec information Tolerance mm : ← 1.50
    Customer : DAEWOO
    Motor : V2-8TC Firing order : 8- 7- 2- 6- 3- 5- 4- 1

    TEST BENCH REQUIREMENTS Phasing : 0-45-90-135-180-225-270-315


    Tolerance : ← 0.30
    Inlet Line : 3.1 Chack tolerance 。NW : ← 0.50

    Test oil inlet Start of delivery mark


    temp. ℃ : 40
    Tolerance ℃ : ← 2.0 Barrel no. : 1

    Overflow valve : 1 417 413 025


    BASIC SETTING
    Inlet press. bar : 1.5
    Tolerance bar : ← 0.1 Rated speed rpm : 1150

    Test nozzle holder Rack travel in mm : 13.60


    assambly : 1 688 901 105 Tolerance mm : ← 0.05

    Opening pressure bar : 208.5 Del. quantity


    Tolerance bar : ← 1.5 ㎤/1000 stroke : 208.0

    Test lines : 1 680 750 089 Tolerance


    Outside diameter : 8.0 ㎤/1000 stroke : ← 1.0
    Inside diameter : 3.0
    Length mm : 600 Check tolerance
    ㎤/1000 stroke : ← 4.0
    REMARKS
    spread tolerance
    ㎤/1000 stroke : 7.0

    Check tolerance
    ㎤/1000 stroke : 10.0

    Rated speed rpm : 300 GUIDE SLEEVE POSITION


    Rack travel in mm : 5.80 Rated speed rpm : 600
    Tolerance mm : ← 0.20
    Rack travel in mm : 20.00
    Del. quantity Tolerance mm : ← 0.80
    ㎤/1000 stroke : 18.0 FULL LOAD DELIVERY AT FULL LOAD STOP

    Tolerance Rated speed rpm : 1150


    ㎤/1000 stroke : ← 3.0
    Aneroid pressure hpa : --
    Check tolerance
    ㎤/1000 stroke : ← 6.0 Del. quantity
    ㎤/1000 stroke : 208.0
    Spread tolerance
    ㎤/1000 stroke : 5.0 Tolerance
    ㎤/1000 stroke : ← 1.0
    Check tolerance
    ㎤/1000 stroke : 8.0 Check tolerance
    ㎤/1000 stroke : ← 4.0

    (B)SETTING OF INJECTION PUMP WITH Spread tolerance


    GOVERNOR ㎤/1000 stroke : 7.0

    GUIDE SLEEVE TRAVEL Check tolerance


    ㎤/1000 stroke : 10.0
    Rated speed rpm : 300 ㎤/1000 stroke : 10.0
    Guide sleeve travel mm : 2.39 RATED SPEED
    Tolerance mm : ← 0.10
    Control lever position degree : 34.0
    Rated speed rpm : 1207 Tolerance degree : ← 4.0
    Guide sleeve travel mm : 6.36
    Tolerance mm : ← 0.10 Control lever position degree : 95.0
    Tolerance degree : ← 4.0
    Rated speed rpm : 650
    Guide sleeve travel mm : 6.00 Rack travel mm : 12.60
    Tolerance mm : ← 0.10 Rated speed rpm : 1202
    Tolerance 1/min : ← 8
    Rated speed rpm : 382
    Guide sleeve travel mm : 5.26 Rack travel mm : 4.00
    Tolerance mm : ← 0.10 Rated speed rpm : 1280
    Tolerance 1/min : ← 15
    Rated speed rpm : 450
    Guide sleeve travel mm : 6.00 Rack travel mm : 0.50
    Tolerance mm : ← 0.10 Rated speed rpm : 1350
    Tolerance mm : ← 0.50
    Rated speed rpm : 1370 LOW IDLE
    Guide sleeve travel mm : 11.50
    Tolerance mm : ← 0.50 Control lever position degree : 75.0

    You might also like