Spring 2018

FRACTURE MECHANICS
CVEN-6831/7161
T-Th 2:00-3:15 ECCE-1B47

Victor E. Saouma
saouma@colorado.edu
ECOT450; 2-1622
Dept. of Civil, Environmental and Architectural Engineering
University of Colorado, Boulder, CO
Jan. 16, 2018

Target This course addresses the need of students interested in: a) Fundamental understanding of fracture
mechanics starting from continuum mechanics; b)Understanding failure and size effects; c)role of fracture
mechanics in understanding design and analysis of flawed or potentially flawed components; d) forensic
engineering.
Open to M.S. and PhD students.
Course description: In most structures (Civil, Mechanical, Aerospace), failure is directly or indirectly
related to fracture. This course will blend theoretical (50%) computational (20%), and material (30%)
aspects into a course geared for students interested in exploring the analysis of fracture based failures.
Very heavy emphasis will be placed on independent work/project/presentations.
Meeting prerequisites: Mechanics of Materials, Finite element. The course will start with a brief review
of continuum mechanics and elasticity. Mathematica will be extensively used throughout the course.

Schedule: T-Th: 3:30-4:45

Textbooks: Recommended, (but not required):
Anderson, T.L., Fracture Mechanics; Fundamentals and Applications, CRC Press, third Edition. Lecture
notes will be provided.

Assignments: There will be approximately 5 homework assignments, a term paper, a term project and
one exam. The term paper and project may be related to a student research interest or industrial
application. Examples of past projects.
Instructor: Has been involved in theoretical, numerical and experimental fracture mechanics for over 30
years. His research has been applied to dams, nuclear reactors, solid-rocket propellants, and metal fa-
tigue. He is past President of the international Association of Fracture Mechanics of Concrete FraMCoS.
This course has been offered in Boulder, Milan, Barcelona, Lausanne and Paris.
Enrollment: Only students registered for the course could attend the lectures (sorry no auditing )
Outcome After completion of this course, you would have strengthen your basic understanding in Me-
chanics (and Mathematica), acquired the knowledge to conduct forensic studies in the investigation of
failures/accidents and to understand the true strength of many materials.

1
 Tentative Course Outline (not necessarily in this order)

Following is the tentative course outline. Coverage may vary depending on student interests.

I Introduction
1. Historical Overview
2. Stress based failure theories
3. Design Philosophies
II Review of Mechanics (∼ 1-2 weeks) Review of the fundamental relations in Mechanics using tensor (indicial)
notation: Strain, Strain, Equilibrium, Compatibility, Hooke’s Law, Airy Stress Function, Complex Functions
using Mathematica.
III Linear Elastic Fracture Mechanics: (∼ 2 weeks)
1. Elastic Crack Tip Stress Field: Stress around an Elliptical Hole (Inglis, 1913), Complex Stress Functions
(Westergaard, 1939), Bi-Material (Williams, 1959).
2. Stress Intensity Factors (Irwin, 1957): Elliptical Cracks, Design Philosophy (Example)
3. Energy Principles (Griffith, 1921): Ideal Fracture Strength (?), Griffith’s Theory (Griffith, 1924), Energy
Release Rate, Gc and R Curves, Compliance Calibration Method (Mostovoy, 1967).
4. Fracture of Anisotropic Bodies: Basic Equations of Anisotropic Elasticity (Lekhnitskii), Stress Analysis
(Sih, Paris, and Irwin, 1965).
5. Mixed Mode Crack Propagation: Maximum Circumferential Tensile Stress (Erdogan, 1963), Maximum
Strain Energy Release Rate (Hussain et al. 1974), Minimum Strain Energy Density (Sih, 1974), Anisotropic
Materials (Saouma, Ayari, Leavell, 1986).
IV Elasto-Plastic Fracture Mechanics: (∼ 1 Week)
1. The Crack Tip Plastic Zone: First and second Order Approximation (Irwin), Dugdale and Barenblat’s
models, Multiaxial Stress Based (Von-Mises, Tresca); Plane Stress versus Plane Strain.
2. Crack Tip Opening Displacements (Wells)
3. Energy Methods: J Integral Derivation (Rice); Variations on Original J Formulation, J-R Concept, EPRI
method.
V Fracture Toughness Testing: (∼ 1 week)
1. Fracture toughness (ASTM E399)
2. Fracture Energy (RILEM, ISRM)
VI Subcritical Crack Growth: (∼ 1 week)
1. Fatigue Models: Paris Law (Paris, 1963), Forman Law (Forman, 1967), Walker’s Law, Table Look-Up.
2. Other: Mixed Mode Fatigue Crack Growth, Fatigue Life Prediction, Variable Amplitude Loading,
3. Load Interaction, Retardation Model: Wheeler, Generalized Willenborg
4. Corrosion
VII Numerical Methods: (∼ 2 weeks)
1. Isoparametric singular element: Original Formulation (Barsoum), Subsequent Extensions, Assesment of
Singular Isoparametric Elements (Fawkes et al.).
2. Extraction of SIF: Nodal Displacement Based: Without Singular Elements (Displacement Extrapolation)
With Singular Elements (Displacement Correlation Method), Energy Based Methods: Energy Release
Rate, Virtual Crack Extension (Park), Virtual Crack Extension (Sha), J1 and J2 Integrals (Hellen and
Blackburn), Mutual Potentials (Stern & Becker), Surface Integral (Babuska)
3. Elasto-Plastic Analysis, J Integral
4. Fracture of cementitious materials: Fictitious Crack Model, (Hillerborg 1976), Size Effect Law (Bazant,
1984), ICM (Červenka and Saouma, 1994), Crack Band Model (Bažant, LEFM and NLFM (Fictitious
Crack Model), (Reich 1992)

2
 5. Lattice Model.
VIII Applications And Case Studies: (∼ 4 weeks)
1. Concrete: Applications to nuclear power containment vessels: Creep fracture, Transport (gas and liquid)
in porous media, permeability, hydro-mechanical behavior.
2. Rock: Blasting; Hydro-fracturing.
3. Metals (connections under seismic excitation).
4. Solid rocket propellants (polymers).

Past Term Projects

Can be viewed here.

• Analysis Of Butt Welded Joints • Fracture Mechanics Based Simulation Of Anchors

• Cohesive Crack Models • Fracture And Fractals
• Cohesive Cracks For Interfaces • Fracture In Solid Rocket Propellants
• Concrete Under High Temperatures • Fracture Mechanics Of Bond In reinforced concrete
• Concrete Fracture • Fracture Mechanics Partition Unity Method
• Crack Between 2 Dissimilar Materials • Fracture Steel Connection Under Earthquake Load
• Crack Detection Location With White Noise Vibra- • Fracture Testing Of Concrete
tion • Indentation Of Rock; Numerical Simulation
• Crack Propagation In Draw Cylinder • Numerical Fracture Simulation Of Porous Sintered
• Crack Propagation In Aluminium Panels Steels
• Dynamic Fracture Mechanics • Size Effects On Shear Strength
• Fatigue Crack Propagation With Retardation • Slope Stability
• Fatigue Crack Propagation • Fracture and flow (liquid and/or gas).

Selected Bibliography
1. Anderson, T.L., Fracture Mechanics; Fundamentals and Applications, CRC Press, 1995.
2. Atkins, A.G., and Mai, Y.W., Elastic & Plastic Fracture, John Wiley, 1985.
3. Broek D., The Practical Use of Fracture Mechanics, Kluwer Academic Publishers, 1989.
4. Broek D., Elementary Engineering Fracture Mechanics, 4th Revised Edition, Martinus Nijhoff Publishers, 1986.
5. Cherepanov G.P., Mechanics of Brittle Fracture, McGraw Hill, 1979.
6. Hertzberg, Deformation and Fracture Mechnaics of Engineering Materials, Fifth Ed., J. Willey.
7. Hudson, C.M. and Rich, T.P. (Eds.) Case Histories Involving Fatigue and Fracture Mechanics, ASTM STP918,
American Society for Testing and Materials, Philadelphia, 1986.
8. Kanninen, M.F., and Popelar, C.H., Advanced Fracture Mechanics, Oxford Engineering Science, Series 15, 1985.
9. Knott, J.F., Fundamentals of Fracture Mechanics, Halsted Press/John Wiley & sons 1973.
10. Liebowitz (Ed.), Fracture -An Advanced Treatise, Academic Press, 1968.
11. Owen, D.R., and Fawkes, A.J., Engineering Fracture Mechanics Numerical Methods and Applications, Pineridge
Press, 1983.
12. Suresh, S., Fatigue of Materials, Cambridge University Press, 1991.
13. Tada and Irwin, Stress Analysis of Cracks, Del Research Corp.
14. Journals: Engineering Fracture Mechanics, International Journal of Fracture, Fatigue.

3
COMPUTER PROGRAMS AVAILABLE

Extensive usage of the Bechtel Lab will be made through the following computer programs:

1. Mathematica, Matlab
2. Merlin (Saouma’s group)
3. Abaqus