TECHNICAL INFORMATION

BRITISH STANDARD KERB AND EDGING www.aggregate.com/britishstandardkerb

BRITISH STANDARD KERB AND EDGING

KERBS AND EDGING

A RANGE OF KERBS,
CHANNELS AND EDGING AS
SPECIFIED IN THE CURRENT
VERSION OF BS EN 1340.
Designed to provide edge restraint in
pedestrian and vehicular applications.

Complies with British Standards.

Range of accessories to suit a variety

of applications.

APPLICATIONS
British Standard kerb is a cost effective
kerb for all applications.

MANUFACTURING STANDARD
British Standard kerb is manufactured using
a wet pressed process and is manufactured
PERFORMANCE WITH CO­­­­LOUR SWATCH
in accordance with and complies with all
SLIP RESISTANCE
relevant sections of BS EN 1340: Concrete
Unpolished slip resistance values, when tested
Kerb Units – requirements and test
in accordance with BS EN 1340, are available
methods.
on request. All Charcon kerb units are
classified as having a low potential for slip. 1
Charcon Hard Landscaping fully operates
an accredited Quality Assurance scheme, 1. Grey
Polished slip resistance values can be
certified to BS EN 9001:2008 which is
provided on request.
independently and regularly assessed by
BSI (British Standards Institution). All
COMPLEMENTARY PRODUCTS
Charcon manufacturing sites are also
Designed for use with Charcon flag and
certified to BS EN 14001 Environmental
block paving ranges.
Management Systems.

A full range of accessories are available. Please refer to page 108 in the Charcon portolio for further details.
† Represents non-primary material within the complete mix design.

Q25.
For NBS clauses, refer to Aggregate
OHS 61759 FM 96927 EMS 96928 Industries technical services.
 TECHNICAL INFORMATION
BRITISH STANDARD KERB AND EDGING www.aggregate.com/britishstandardkerb

BRITISH STANDARD KERB AND EDGING

KERBS AND EDGING PRODUCT INFORMATION

BRITISH STANDARD KERB PRODUCT DATA

Type HB1 HB2 HB2 HB3 BN1 BN2 BN2 BN3 BN3 SP2 SP2 SP3
Length (mm) 914 914 609 914 914 914 609 914 609 914 609 914
Height (mm) 305 255 255 150 305 255 255 150 150 255 255 150
Width (mm) 150 125 125 125 150 125 125 125 125 125 125 125
Weight (kg) 100 70 46 40 100 70 46 40 30 60 40 30
Units/m (approx) 1.09 1.09 1.64 1.09 1.09 1.09 1.64 1.09 1.64 1.09 1.64 1.09
No. per pack 14 18 18 18 14 18 18 18 24 18 18 24
M/pack (approx) 12.84 16.51 10.98 16.91 12.84 16.51 10.98 16.91 14.63 16.51 10.98 21.9
Pack weight (T) 1.4 1.26 0.72 0.72 1.4 1.26 0.72 0.72 0.72 1.26 0.72 0.72
Colours Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey
HB - Half batter / BN - Bullnose / SP - Splay.

BRITISH STANDARD EDGING PRODUCT DATA

Type Flat top Flat top Flat top Bullnose Bullnose Bullnose Round top Round top Round top
Length (mm) 914 914 914 914 914 914 914 914 914
Height (mm) 150 200 255 150 200 255 150 205 225
Width (mm) 50 50 50 50 50 50 50 50 75
Weight (kg) 15 20 30 15 20 30 15 20 40
Units/m (approx) 1.09 1.09 1.09 1.09 1.09 1.09 1.09 1.09 1.09
No. per pack 40 20/40 20 40 20/40 20 60 20 12
M/pack (approx) 36.56 18.28/35.56 18.28 36.56 18.28/35.56 18.28 55.05 18.28 11.01
Pack weight (T) 0.62 0.45/0.90 0.55 0.62 0.45/0.90 0.55 0.90 0.45 0.45
Colours Grey Grey Grey Grey Grey Grey Grey Grey Grey

HB1 (98kg) HB2 (64kg) HB3 (38kg) CS1 (71kg) SP2 (63kg) BN3 (40kg)
CS2 (41kg)

Nominal weights of units shown in brackets.

 TECHNICAL INFORMATION
BRITISH STANDARD KERB AND EDGING www.aggregate.com/britishstandardkerb

BRITISH STANDARD KERB AND EDGING

KERBS AND EDGING PRODUCT INFORMATION

DROPPERS AND CROSSING KERB RADIUS KERBS AND CHANNELS

BS EN 1340
125x255mm HB – 125x150mm BN (LH) DL1 The table shown is an approximate
guide only.
125x255mm HB – 125x150mm BN (RH) DR1
All radii over 15m (40 ft) can be achieved
125x255mm SP – 125x150mm BN (LH) DL2 by using standard 914mm (3 ft) or 609mm
(2 ft) kerbs.
125x255mm SP – 125x150mm BN (RH) DR2
Before ordering, check availability of size
125x150mm BN as Crossing kerb and profile.

125x255mm BN – 125x150 BN (LH) non BS Also when ordering, please state the
dimensions first, then the profile, then the
125x255mm BN – 125x150 BN (RH) non BS radii followed by internal or external, eg
125x150 BN 4m ext.
RADIUS DROPPERS BS EN 1340
Approx No. Units per 1/4 circle
125x255mm HB – 125x150mm BN (LH)
Size of radius (m) Units per 1/4 circle
0.5 1
125x255mm HB – 125x150mm BN (RH) 1 2
2 4
Available in 4, 6, 8 and 10m. 3 6
4 8
5 10
6 12
8 16
10 20
15 30

DL2 DR2
Splay to BN shown Splay to BN shown

Internal kerb external channel External kerb internal channel

 TECHNICAL INFORMATION
BRITISH STANDARD KERB AND EDGING www.aggregate.com/britishstandardkerb

BRITISH STANDARD KERB AND EDGING

KERBS AND EDGING PRODUCT INFORMATION

QUADRANTS BS EN 1340 TRANSITION KERBS BS EN 1340

305x255mm QHB 125x255mm HB RH – 125x255mm SP LH TR1

455x255mm QHB 125x255mm HB LH – 125x255mm SP RH TL1

305x255mm QBN 125x255mm HB RH - 125x255mm BN LH TR2

HB305 (42kg), HB455 (90kg) 125x255mm HB LH - 125x255mm BN RH TL2

HB305 (42kg), HB455 (90kg) 60kg (125x255mm HB LH – 125x255mm SP RH shown)

ANGLES BS EN 1340 OFFLET (WEIR KERBS) HALF BATTERED ONLY

Designed to allow surface water to be discharged through
125x255mm HB ext angle HBXA the opening in the face of the kerb to a 100mm pipe.

125x255mm HB int angle HBIA Offlet or Weir Kerb - half battered only.

125x255mm BN ext angle BNXA

125x255mm BN int angle BNIA

HBIA (33kg) HBXA (33kg) (56kg) (56kg)

 TECHNICAL INFORMATION
BRITISH STANDARD KERB AND EDGING www.aggregate.com/britishstandardkerb

BRITISH STANDARD KERB AND EDGING

KERBS AND EDGING PRODUCT INFORMATION

NON-STANDARD KERBS NON-STANDARD DROPPERS AND

AND CHANNELS CROSSING KERB

Subject to availability and minimum 125x255mm HB – 125x175 SP*(LH) DL.

order quantity.
125x255mm HB – 125x175 SP*(RH) DR.
CHANNELS
125x175mm SP* as Crossing kerb.
150x150mm CS WR4 shown

DOUBLE PATTERN

125x255mm HB – 125x215 WRCC (LH)

Order Code WR1.

125x215mm HB – 125x175 WRCC (LH)

Order Code WR2.

125x215mm HB – 125x175 WRCC (RH) WR3 shown

Order Code WR3.

125x255mm HB – 125x215 WRCC (RH)

Order Code WR4.

*NB 25 mm splay.

Crossing Kerb

DISH CHANNELS, FLUTED CHANNEL & MOTORWAY CHANEL

50
255
25

13 50
25

11
4
4

4
4

4
91
91

91
91

91
150

150
125

100

75

305 150 255 455

255

305 x 150 CD Dish Channel 225 x 125 CD Dish Channel 150 x 100 CD Dish Channel 255 x 75 x FLCH Motorway Channel
6 x 12 Dish Channel. 5 x 10 Dish Channel 6 x 4 Dish Channel Fluted Channel. Manufactured to order only.
CD1. CD2.
 TECHNICAL INFORMATION
BRITISH STANDARD KERB AND EDGING www.aggregate.com/britishstandardkerb

BRITISH STANDARD KERB AND EDGING

KERBS AND EDGING PRODUCT INFORMATION

SUSTAINABILITY AND KEY AGGREGATE AND MAINTENANCE AND CLEANING

LOCAL SOURCING RECYCLED CONTENT Aggregate Industries can supply on request
ENERGY USE: Aggregate Industries is at British Standard kerb is manufactured advice on specific stain removal and general
the forefront of sustainability and has using high quality, hard wearing locally maintenance, suitable cleaning products
committed to reduce carbon emissions by sourced aggregates. and referrals to specialist cleaning companies.
20% by 2016 based on a 2012 base line.
RECYCLABLE: 100% of the product can GENERIC GREEN GUIDE RATING* COSHH DATA
be recycled thus reducing the amount of Not applicable. Full COSHH data on the Charcon range of
material that is sent to landfill. products is available on request. Please call
MANUFACTURING LOCATION: POLICIES the technical helpline on 01335 372222.
Produced in the UK, with locally sourced Aggregate Industries’ policies on the
materials under strict environmental and environment and community, health and TECHNICAL SUPPORT
social legislation, for local supply. safety and sustainable solutions for different DETAILED GUIDANCE AND ASSISTANCE
RESPONSIBLE SOURCING: Aggregate product applications can be viewed on our WITH THE PREPARATION OF SPECIFICATION
Industries is the first company in the world website www.aggregate.com OF THE CHARCON RANGE OF HARD
to achieve accreditation to the BES 6001 LANDSCAPING PRODUCTS, INCLUDING
Framework Standard for the Responsible DESIGN AND INSTALLATION MODEL CLAUSES, IS AVAILABLE THROUGH
Sourcing of Construction Products. For successful installation refer to BS 7533 THE SALES OFFICE. A FREE TECHNICAL
Part 6. For specific design, installation and DESIGN SERVICE IS ALSO AVAILABLE.
Aggregate Industries has achieved a maintenance guidance, please contact our
‘Very Good’ rating for major product technical department on 01335 372222. FOR FURTHER INFORMATION, PLEASE
groups. The BES 6001 standard assesses: REFER TO OUR TECHNICAL SERVICES
ON 01335 372222.
Quality management.
*Ratings based upon generic green guide values (2009)
Environmental management. supplied by BRE Global Ltd, www.thegreenguide.co.uk

Health and safety management.

Greenhouse gas emissions.

Minimising raw material usage.

Labour practice.

Biodiversity.

Community engagement.

The information contained within this publication was accurate at time of production. However, Aggregate Industries reserves the right to introduce modifications or changes to detail at
any time without notice. No charge is levied for this publication or advice therein, and accordingly the company, its employees and authorised agents can accept no liability whatsoever,
either indirectly or directly arising from the use of its products.

Charcon
Aggregate Industries, Hulland Ward,
Ashbourne, Derbyshire DE6 3ET
Tel: +44 (0)1335 372 222
Fax: +44 (0)1335 370 074
Email: landscaping@aggregate.com
www.aggregate.com

©Aggregate Industries UK Limited. October 2016