My Top Skills:-: Short Bio
My Top Skills:-: Short Bio
My Top Skills:-: Short Bio
My Top Skills:-
Basic and detailed engineering, project discipline lead, proposal, technical bid evaluation, Construction and technical
trainings.
Short Bio:
I am a qualified Process Control Instrumentation Automation Engineer with 11 years experience in the field of Instrumentation
& Process Control. Expertise in basic &detailed Design engineering, Bid Evaluation, construction & commissioning
with experience in various DCS & PLC hardware & Software, field level instrumentation maintenance and level 0 (Level-0)
Automation.
Ability to complete a project within Budget & Schedule while incorporating all the Client Requirements.
Team building and leading to achieve a common goal.
Instrument listing
Control / Monitoring / Measuring system
Control room layout
Sizing of valves and orifices
Loop schematics
Data sheets for Shutdown Panel, RTU & SCADA, Shutdown Valves, Self Regulated Valves, Safety Relief Valves, Control
Valves, Orifice and Conditioning Orifice Plates , Coriolis & Pressure and DP Transmitters, Temperature Transmitters,
Pressure & Temperature Gauges, Level Gauges, Level Switches, Detectors, Manual Call Point, , Rota meters, Electronic
Controller, Deluge Valves etc.
I/O List for SCADA, DCS etc.
Instrument Hook-up Details
Operating Manual
Cable Block Diagram, Tubing Block Diagram, MCT Layouts, Tubing Layouts, Cable Routing & Cable Tray Layout, Cable
Schedule, Tubing Schedule, and ESD.( emergency shutdown devices)
Panel layout
Logic diagram.
Fire and gas detection system
System Architectural Diagram
MTOs., PLC-Ladder logic, Functional Block Diagram, Logic Preparation, Factory Inspection of DCS AND PLC and Field
Level Instrumentations equipments.
Softwares Used: - Instrumentation engineering uses Instrucal, Orifice Software-BS-1042 and Flow Cal
Hands of Experience in Control System
1) Have worked with Siemens SIMATIC S7-1500 PLC with Profi-Bus-PA in Sinter Plant-II in Bhilai Steel Plant.
2) Siemens SCAUT controller (4-20ma DC) (Siemens control and Automation Unit) In Protection of Compressors in
Compressed Air Station (CAS-IV)
3) SIMATIC S7-200 mini PLC (4-20ma DC) in Nitrogen Metering Station in Bhilai Steel Plant.
4) Siemens SCADA in Power supply facilities and Control under Oxygen Plant II.
5) CENTUM-VP (Foundation-Field Bus based) of Yokogawa for DCS in Main Technological and Instrumentation
Package under Oxygen Plant II in Bhilai Steel Plant.
6) AC-800M of ABB PLC in Re-circulation of Water system and Cooling Towers.
7) Rockwell Control Logics (RX) Control Net based PLC for Up-Gradation of Nitrogen Network.
8) Delta-V DCS of Emerson for Pressure Reducing and Monitoring Station from BOO-Plant for Oxygen, Nitrogen and
Argon.
9) Siemens SMART-Numerical relays compatible with IEC-61850 for substation Automation and Monitoring.
10) All SMART and Traditional Field level Instrumentations including Transmitters (Pressure, differential Pressure,
Temperature, Current and Absolute), Analyzers, and Electromagnetic Flow meters etc of Siemens, Yokogawa, ABB, and
Emerson, P&F,E&H.etc.
EDUCATIONAL QUALIFICATION
C) In MECON Ltd (FROM 31.01.2008 TO 01.10.2017) Project Engineer. - Instrumentation and Process control
Automation (On Contract Basis)
Last CTC:- 7 L.
Project Name Area Work Details Period Plant Name Project Area
1. PCBL Durgapur Instrumentation Level -0 and Level 1 26.03.2018 PCBL Durgapur Modernization and Up
and process Automation for Plant Air, to Dec gradation phase 2.
Control Process Bag Filter, 2018.
Automation. Reactor Instrumentation
and Control , Up
gradation from 4-20MA
DC to Foundation Field
bus, Process Bag Filters ,
pulsing valves,
Replacement of Cables
,Cooling Towers, Ware
House Packing and
Loading Load cell and
Connectivity to controller
PLC- modifications etc.
B. Drinking water
facilities in Steel Melting
Shop- III.
4. Automation Instrumentation Detail Engineering Sep 2008 to June BSP 7.0Mt INTEGRATED
Instrumentation system Automation and 2013 STEEL PLANT Bhilai steel
under Sintering Plant-2 Signaling. Plant, CG.
5. Electrics and Automation Electrical and Detail Engineering June 2009 Oct RSP 7.0Mt INTEGRATED
Instrumentation system Instrumentation and Feasibility 2012 STEEL PLANT Rourkela steel
under Pellet Plant Automation and reports. Plant, CG.
Signaling.
6. Pressure Reducing and Electrical and Detail Engineering Nov 2013 to June BSP 7.0Mt INTEGRATED
Monitoring Station from Instrumentation 2017 STEEL PLANT Bhilai steel
BOO-Plant Automation and Plant, CG.
Signaling.
7. Gas-Holder 60,000m3- Power Distribution & Detail Engineering March 2012-Apr BSP 7.0Mt INTEGRATED
Dry Type. Instrumentation 2016 STEEL PLANT Bhilai steel
Plant, CG.
7A. Centralized Energy Electrical and Detail Engineering July 2014 to Jan BSP 7.0Mt INTEGRATED
Management Centre and Instrumentation 2017 STEEL PLANT Bhilai steel
Plant Energy Automation and Plant, CG.
Performance:- Balance Signaling.
Of Plant.
8. Up-Gradation Of Electrical and Detail Engineering From 22.09.10 to BSP 7.0Mt INTEGRATED
Nitrogen Network Instrumentation 22.03.12 STEEL PLANT Bhilai steel
Automation Signaling. Plant, CG.
9. Ore Handling Plant and Electrical and Detail Engineering July 2014 to Oct BSP 7.0Mt INTEGRATED
Coke Oven Battery Instrumentation 2016 STEEL PLANT Bhilai steel
Automation and Plant, CG.
Signaling.
10. Blast furnace 8- 4060 M3 Instrumentation and Detail Engineering 06.07.2009 to BSP 7.0Mt INTEGRATED
volume process control and 15.08.2017 STEEL PLANT Bhilai steel
Plant, CG.
10 All Instrumentation and Total Instrumentation Project monitoring Continue from BHILAI STEEL PLANT
Process Control and control automation and construction 30.08.2011 to
Automation and system jobs, erection 01.10.2017 7.0MT EXPANSION
Telecommunication commission ,testing,
System, DCS, PLC, site supervision,
SCADA, DAS, RTU, engineering meeting,
DCU, SCAUT. project progress
SUBSATATION reviewing meeting
AUTOMATION ,coordinating with
SYSTEM WITH IEC- client ,consultant,
61850 smart Relays, FAT, designers, contractor
SAT etc. etc.
ADDRESS:
SANCHAYAN MITRA