PRODUCT SPECIFICATION camera solutions

Sarix® IME Indoor and Environmental Mini Domes

UP TO 3 MPX, WDR AND LOW-LIGHT PERFORMANCE, H.264, IK10, IP66

Product Features
• SureVision 3.0 Technology, Including:
– 130dB Wide Dynamic Range (WDR)
– Advanced Low-Light Performance, 0.05 lux
– Anti-Bloom Technology
– 3D Noise Filtering
– Enhanced Tone Mapping
• Up to 3 Megapixel (MPx) Resolution
• Up to 60 Frames per Second (fps)
• Autofocus Varifocal 3 ~ 9 mm or 9 ~ 22 mm Lens
• Power over Ethernet (PoE), IEEE 802.3af, 24 VAC, 12 VDC • Up to 128 GB Edge Storage with SD Card
• Pelco H.264 Smart Compression Technology • Compatible with Pelco and Third-Party Video Systems
• Built-in Analytics Suite • ONVIF Profile S, Profile G, and Profile Q Conformant
• Adaptive IR Illumination up to 30 Meters (Option) • Full 3-Year Warranty and Support

Sarix Enhanced Range with SureVision 3.0 Video

Sarix ® Enhanced (E) range cameras feature SureVision The IME Series supports two independently-configurable video
technology, delivering high definition (HD) resolution, consistent streams in addition to a service video stream. The streams can be
color science, fast processing power, and simultaneous advanced compressed in MJPEG and H.264 formats across several resolution
low-light performance with wide dynamic range (WDR) and configurations. The IME Series offers real-time video (60 fps) with
anti-bloom technologies. New advancements include 3D noise full HD resolution (up to 3 MPx) using H.264 compression for
filtering, smooth response to illumination changes, and improved optimized bandwidth and storage efficiency.
tone mapping to retain color accuracy and overall image contrast.
The streams can be configured to a variety of frame rates, bit rates,
Designed to install quickly, the cameras include autofocus, motorized and group of pictures (GOP) structures for additional flexibility in
zoom, built-in analytics, and other advanced features needed for bandwidth administration. In addition, streams can be encoded as
demanding security applications. constrained variable bit rate (CVBR) or constant bit rate (CBR).

Camera Open and Integrated

The IME Series contains an integrated varifocal MPx autofocus lens Sarix Enhanced range cameras seamlessly connect to Pelco video
(3 ~ 9 mm or 9 ~ 22 mm). Form factors include indoor and outdoor management systems such as VideoXpert™, Endura® version 2.0 (or
domes. All models feature a sturdy design that is both vandal- and later), and Digital Sentry® version 7.3 (or later). Sarix Enhanced
tamper-resistant. The environmental model features worry-free use range cameras integrate with major third-party video management
in a wide range of environmental operating conditions. systems through the Pelco API, and other third-party software and
systems through the ONVIF Profile S, G, and Q standards.
Sarix Enhanced range cameras include four unique, advanced
autofocus options: temperature change (every 5°C / 9°F), day/night Built-In Analytics
transition, a daily autofocus routine, and manual autofocus. These Analytics enhance the flexibility and performance of Sarix
benefits ensure clear, focused images regardless of the scene or Enhanced range cameras. Eight behaviors are preloaded and
environment. All autofocus options are available through the web UI. included as standard features. These behaviors can be configured
and enabled using a standard Web browser, and they are compatible
Integrated and Adaptive IR Illumination is optionally available with VideoXpert, Endura, or a third-party system that supports alarms
on all outdoor models. using Pelco’s API.

International Standards
Organization Registered Firm;
ISO 9001 Quality System

C4026 / REVISED 12-15-17

TECHNICAL SPECIFICATIONS

CONVENIENT POWER Analytics behaviors can be scheduled to work during a certain time
Sarix Enhanced range cameras are designed with Power over or condition. For example, during the day, a camera can be configured
Ethernet (PoE), 24 VAC and 12 VDC to reduce costs and simplify with Object Counting to count the number of people that enter a lobby
planning, wiring, and installation. PoE functionality works with PoE- door. At night, the operator can change the profile to Camera
enabled network switches or power injectors, eliminating the need Sabotage to trigger an alarm if a camera is moved or obstructed.
for separate power supplies and cabling, and increasing camera fail Available behaviors include:
safety through an uninterruptable power supply (UPS). • Abandoned Object: Detects objects placed within a defined zone and
triggers an alarm if the object remains in the zone unattended. An airport
ANALYTICS terminal is a typical installation for this behavior. This behavior can also
Sarix Enhanced range cameras includes eight user-configurable detect objects left behind at an ATM, signaling possible card skimming.
behaviors. The camera is capable of running up to two behaviors at • Intrusion Detection: Detects and tracks objects that enter a scene and
then triggers an alarm when the objects enter a user-defined zone. This
the same time. behavior is primarily used in outdoor environments with light traffic to
For each behavior, you can create several custom profiles that reduce the number of false alarms caused by environmental changes.
contain different camera settings. With these profiles, you can set up • Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
different scenarios for the behavior, which will automatically detect lens cap. Any unauthorized repositioning of the camera also triggers an
and trigger alarms when specific activity is detected. alarm.
• Wrong Direction: Generates an alarm in a high traffic area when a
Analytics are configured and enabled using a standard Web browser, person or object moves in a specified direction. Typical installations for
and behavior alarms are compatible with VideoXpert or a third-party this behavior include an airport gate or tunnel where cameras can detect
system that supports Pelco’s API system. objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.
• Loitering Detection: Identifies when people or vehicles remain in a
defined zone too long. This behavior is effective in real-time notification
of suspicious behavior around ATMs, stairwells, and school grounds.
• Object Counting: Counts the number of objects that cross a defined
line. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.
• Object Removal: Triggers an alarm if an object is removed from a
user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as a painting from a wall or
a statue from a pedestal.
• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.
TECHNICAL SPECIFICATIONS

COMPONENT FEATURES
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

13.38 (5.27) NPT 3/4”-14

5.46
(2.15)

11.74
(4.62) Indoor/Vandal-Resistant, Surface Mount
• Attaches to 4S Electrical Box Adapter
• Meets IP66
Ø 13.38 (5.27) • Meets IK10 (20J)
• Aluminum Base and Plastic Trim Ring
• RAL 9003
NPT 3/4”-14

11.70 (4.60)

13.38 (5.27) NPT 3/4”-14

5.46
(2.15)
Environmental/Vandal-Resistant, Surface Mount
• Attaches to 4S Electrical Box with Adapter
11.74
(4.62) • Meets IP66
• Meets Type 4X (with IMEEBAP adapter plate
accessory and IMEPM-E pendant mount accessory)
Ø 13.38 (5.27) • Meets IK10 (20J)
• Aluminum Construction
• RAL 7047
NPT 3/4”-14
• Heater
• Optional IR Illuminator

11.70 (4.60)

CAMERA LENS
Imaging Device 1/2.8-inch Lens Type Built-in; varifocal
Imager Type CMOS Focal Length f/1.3, 3 ~ 9 mm, f/1.6, 9 ~ 22 mm
Imager Readout Progressive scan Focus Autofocus, motorized
Highest Resolution Zoom Remote
3 MPx 2048 x 1536 Auto Iris Type DC drive P-iris lens
2 MPx 1920 x 1080 Field of View in Degrees
1.3 MPx 1280 x 960
Signal-to-Noise Ratio >60 dB
Electronic Shutter Range 1/20000 sec (or faster) to 2 sec Focal 3 MPx 1.3 & 2 MPx
Wide Dynamic Range 130 dB Lens
Length Horiz Vert Horiz Vert
White Balance Range 2,000° to 10,000°K
Wide 100° 74° 93° 52°
Sensitivity 3 ~ 9 mm f/1.3; 2,850°K; SNR >20 dB 3 ~ 9 mm
Color (33 ms) 0.050 lux Tele 39° 29° 37° 21°
Color (500 ms) 0.005 lux Wide 33° 24° 30° 14°
Mono (33 ms) 0.010 lux 9 ~ 22 mm
Mono (500 ms) 0.001 lux Tele 14° 10° 13° 7°
Mono (IR on) 0.000 lux
Sensitivity 9 ~ 22mm f/1.6; 2,850°K; SNR >20 dB
Color (33 ms) 0.08 lux
Color (500 ms) 0.008 lux
Mono (33 ms) 0.04 lux
Mono (500 ms) 0.0025 lux
Mono (IR on) 0.000 lux
Day/Night Capabilities Yes
Mechanical IR Cut Filter Yes, (ON/OFF/AUTO selectable), with
different set points on lux
Adaptive IR Illumination 850nm wavelength, maximum distance of
30 meters (100 feet) IR illumination at 0 lux
SD Card Support Up to 128 GB
SDHC/SDXC Cards Supported Yes
TECHNICAL SPECIFICATIONS

AUDIO VIDEO
Streaming Bidirectional: full or half duplex Video Streams Independently configurable primary and
Input/Output Line level/external microphone input; secondary streams plus service stream
Single-ended, stereo, 1 Vp-p max. signal level Available Resolutions Two configurable streams as follows:
Compression G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s

Aspect
MECHANICAL Camera Model MPx Width Height
Ratio
Dome Attenuation
Clear f/0.0 light loss 3 MPx 3.0 2048 1536
Pan/Tilt Adjustment Manual 2.95 1984 1488
Pan 355°
1.8 1600 1200
Tilt 75°
Rotation 340° 2 MPx and 1.2 1280 960
1 MPx
4:3
PHYSICAL 0.5 0.5 800 600
MPx
Weight Shipping 0.3 704 480
Indoor, Surface Mount 1020 gm (2.25 lb) 0.3
Environmental, Surface Mount 1020 gm (2.25 lb) 640 480
(480p)
Product Box Dimensions (approximate) 6.75 x 6.75 x 6.75 in.
0.07 320 240
ENVIRONMENTAL 3 MPx and 2 MPx 2.0
1920 1080
(1080p)
Operating Temperature
Indoor/Vandal-Resistant –10° to 55°C (14° to 131°F)† 1 MPx 0.9
1280 720
Environmental –40° to 55°C (–40° to 131°F)† (720p)
Start-up Temperature 0.6 1024 576
Indoor –10°C (14°F) 16:9
Environmental With heater, –40°C (–40°F) 0.5 960 544
Storage Temperature 0.5 0.3 800 448
Indoor and Environmental –40° to 60°C (–40° to 140°F) MPx
0.2 640 360
Operating Humidity
0.06 320 192
Indoor/Vandal-Resistant 10 to 90%, RH noncondensing
Environmental 5 to 95%, RH noncondensing Maximum Frame Rate Up to 60 frames per second, 30 fps with WDR
Storage Humidity 20 to 80%, RH noncondensing Video Encoding H.264 High, Main, or Base profiles; and
MJPEG
Impact Resistance IK10 (20J) all surfaces per IEC 62262
Bit Rate Control Constrained variable bit rate (CVBR) and
constant bit rate (CBR)
ELECTRICAL
Corridor Mode Electronic image flip and mirror: 180°, 90°
Network Port RJ-45 connector for 100Base-TX and 270° (H.264 only)
Auto MDI/MDI-X
Service Stream JPEG stream; 640 x 480 or 640 x 360,
Cable Type Cat5 or better for 100Base-TX up to 15 fps
Input Power PoE (IEEE 802.3af, Class 3), 24 VAC ±10%,
12 VDC ±10%
PELCO’S H.264 SMART COMPRESSION TECHNOLOGY
Power Consumption Up to 12 W nominal
Current Consumption 330 mA @ POE; 0.5 A @ 24 VAC; Pelco’s H.264 Smart Compression Technology lowers bandwidth and storage
1A @ 12 VDC requirements by up to 70%. Our technology allows the user to make
Local Storage SD, SDHC, SDXC intelligent decisions regarding storage savings and image quality.
Alarm Detects open or closed alarm state
Input 5 VDC maximum, 0.5 mA maximum Pelco’s Smart Compression Technology dynamically analyzes motion
Relay Output ±350V VDC maximum, ±130 mA maximum
occurring within live video in real-time, to intelligently compress the
information you don’t need, while retaining details with clear quality in the
NETWORK areas that are important in the scene. By enabling Dynamic GOP, an added
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), feature of Smart Compression, the number of I-frames are automatically
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,
reduced in scenes with low motion. Based on the complexity of scenes and
SNMP v2c/v3, QoS, HTTP, HTTPS,SSH, SSL,
SMTP, FTP, ARP, ICMP, and 802.1x (EAP) , motion occurring, such as a store room that has limited entry and exit, up to
NTCIP 1205 70% bandwidth savings can be achieved.
Users
Unicast Up to 20 simultaneous users depending on
the resolution settings
Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
TECHNICAL SPECIFICATIONS

MINIMUM SYSTEM REQUIREMENTS CERTIFICATIONS/RATINGS

Processor ® ™
Intel Core i3 processor, 2.4 GHz • CE (Class A)
• FCC (Class A)
Operating System Microsoft® Windows® 7 (32- and 64-bit), or
• ICES-003 (Class A)
DirectX®11, Windows XP Service Pack 3 with
• UL/cUL Listed
DirectX 9.0c; or Mac® OS X 10.4 (or later)
• UL/IEC 60950-22
Memory 4 GB RAM • KC
Network Interface 100 megabits (or greater) • RCM
Monitor Minimum of 1024 x 768 resolution, • Meets IP66 and IK10 rating, and Type 4X (environmental models)
16- or 32-bit pixel color resolution • ONVIF Profile S, Profile G, and Profile Q Conformant
Web Browser Internet Explorer® 8.0 (or later), Google
Chrome™ (51 or later) or Mozilla® Firefox® 3.5 RECOMMENDED MOUNTS
(or later); Internet Explorer 8.0 (or later) is
WMVE-SR Wall mount, 1.5 in., NPT, outdoor,
recommended for configuring analytics
RAL 7047
Media Player Pelco Media Player for Windows 7, XP, or
Vista; or QuickTime 7.6.4 for Mac OS X 10.4 WMVE-SW Wall mount, 1.5 in., NPT, indoor,
(or later) RAL 9003
IMEICM-E Environmental in-ceiling mount, RAL 7047
ANALYTICS IMEICM-I Indoor in-ceiling mount, RAL 9003
Required Systems for Analytics IMEPMB-I Wall mount bracket, light duty, indoor,
Pelco Interface WS5200 Advanced System Management RAL 9003
Software on an Endura 2.0 (or later) system IMEPM-I Indoor pendant mount, RAL 9003
Open API The Pelco API can transmit behavior alarm IMEPM-E Environmental pendant mount, RAL 7047
data to third-party applications, available at IMEEBAP-I Indoor electrical box adapter
pdn.pelco.com
IMEEBAP-E Environmental electrical box and Type 4X
adapter
INTEGRATION
Pelco System Integration VideoXpert; OPTIONAL ACCESSORIES
Endura 2.0 (or later); PA101 Pole adapter for use with WMVE-SR pendant
Digital Sentry 7.3 (or later) mount
Open API Pelco API or ONVIF Profile S, Profile G, and IMELD2-0I Smoke lower dome (indoor)
Profile Q
IMELD2-0E Smoke lower dome (environmental)
Mobile Application Integrated with Pelco Mobile Application IMELD2-1E Clear lower dome (environmental)

SOFTWARE FEATURES
IMEPM-I AND IMEPM-E PENDANT MOUNT
• Multilingual menus in user interface: Arabic, English, French, Italian,
German, Korean, Spanish, Portuguese, Russian, Simplified Chinese, 3.81 (1.50) NPT
Turkish 7.75
• 16 window blanks, configurable in size (3.05)
• Password protection 6.25
(2.46)
• Snapshot with JPEG capture at the same resolution as the highest stream
15.14
configured (5.96)
• Text overlays for camera name, time, date, or custom text Ø 14.62 (5.75)
• Image overlays 7.38
(2.90)

IMEICM-I AND IMEICM-E IN-CEILING MOUNT 10.10 (3.98)

Ø 10.30
(4.05) Indoor color: RAL 9003; Outdoor color: RAL 7047
IN-CEILING
HOLE SIZE
Ø 16.00 IMEEBAP-I & IMEEBAP-E 4S ELECTRICAL BOX ADAPTER
(6.30)
13.48
(5.30) 0.30 Ø 0.42
(0.12) Ø 0.48 (0.16)
Ø 18.90
(0.19)
Ø 13.38 Ø 0.33
(7.44) (0.13)
(5.27)

13.48 Ø 2.74
(5.30) (1.08)

7.59 6.79
(2.99) (2.67) 4.11 5.80
(1.62) (2.28)
0.95
(0.37)

Indoor color: RAL 9003; Outdoor color: RAL 7047

0.55
(0.22)
Indoor color: RAL 9003; Outdoor color: RAL 7047
TECHNICAL SPECIFICATIONS

MODELS*

Back Box Resolution Model Number Lens Description

1.3 MPx IME129-1ES 3 ~ 9 mm Sarix Enhanced Environmental Dome
1.3 MPx IME129-1IS 3 ~ 9 mm Sarix Enhanced Indoor Dome
1.3 MPx IME129-1RS 3 ~ 9 mm Sarix Enhanced Environmental IR Dome
1.3 MPx IME122-1ES 9 ~ 22 mm Sarix Enhanced Environmental Dome
2 MPx IME229-1ES 3 ~ 9 mm Sarix Enhanced Environmental Dome
2 MPx IME229-1IS 3 ~ 9 mm Sarix Enhanced Indoor Dome
2 MPx IME229-1RS 3 ~ 9 mm Sarix Enhanced Environmental IR Dome
2 MPx IME222-1ES 9 ~ 22 mm Sarix Enhanced Environmental Dome
Surface
2 MPx IME222-1IS 9 ~ 22 mm Sarix Enhanced Indoor Dome
2 MPx IME222-1RS 9 ~ 22 mm Sarix Enhanced Environmental IR Dome
3 MPx IME329-1ES 3 ~ 9 mm Sarix Enhanced Environmental Dome
3 MPx IME329-1IS 3 ~ 9 mm Sarix Enhanced Indoor Dome
3 MPx IME329-1RS 3 ~ 9 mm Sarix Enhanced Environmental IR Dome
3 MPx IME322-1ES 9 ~ 22 mm Sarix Enhanced Environmental Dome
3 MPx IME322-1IS 9 ~ 22 mm Sarix Enhanced Indoor Dome
3 MPx IME322-1RS 9 ~ 22 mm Sarix Enhanced Environmental IR Dome
*System options contain a back box/mount, camera, and clear dome.

IMEPMB-I INDOOR WALL MOUNT WMVE-SR (OUTDOOR) & WMVE-SW (INDOOR) WALL MOUNT

16.59 (6.53) 7.42 (2.92)

8.35 2.90
(3.29) (1.14)

9.40 (3.70)
2x Ø 0.42 (0.16)

0.64
(0.25)
4.05
(1.59) Indoor color: RAL 9003; Outdoor color: RAL 7047

4.05
(1.59)

15.69 (6.18)

Color: RAL 9003

Pelco by Schneider Electric Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
625 W. Alluvial, Fresno, California 93711 United States
ONVIF logo are trademarks of ONVIF Inc. All other product names and
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 services are the property of their respective companies.
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 Product specifications and availability are subject to change without notice.
www.pelco.com www.pelco.com/community ©Copyright 2017, Pelco, Inc. All rights reserved.