Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 546 views

    Environmental Management Systems (B) Fault Tree Analysis (C) Failure Mode Effect Analysis (D) Total Productive Maintenance

    Uploaded by

    balajimeie
    This document contains questions from an exam on maintenance engineering. It covers topics such as: 1. Types of maintenance including corrective, preventive, and scheduled maintenance. 2. Maintenance planning, objectives, principles, and job planning. 3. Reliability metrics like MTBF, MTTF, and failure rate. 4. Productivity and its relationship to maintenance. 5. Factors that determine maintenance costs and how to reduce costs. The exam is divided into three parts: Part A contains 10 multiple choice questions worth 1 mark each, Part B contains 10 short answer questions worth 2 marks each, and Part C contains 5 long answer questions worth 14 marks each

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Environmental Management Systems (B) Fault Tree Analysis (C) Failure Mode Effect Analysis (D) Total Productive Maintenance

    Uploaded by

    balajimeie
    546 views4 pages
    This document contains questions from an exam on maintenance engineering. It covers topics such as: 1. Types of maintenance including corrective, preventive, and scheduled maintenance. 2. Maintenance planning, objectives, principles, and job planning. 3. Reliability metrics like MTBF, MTTF, and failure rate. 4. Productivity and its relationship to maintenance. 5. Factors that determine maintenance costs and how to reduce costs. The exam is divided into three parts: Part A contains 10 multiple choice questions worth 1 mark each, Part B contains 10 short answer questions worth 2 marks each, and Part C contains 5 long answer questions worth 14 marks each

    Original Description:

    for engineers

    Original Title

    useful material

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains questions from an exam on maintenance engineering. It covers topics such as: 1. Types of maintenance including corrective, preventive, and scheduled maintenance. 2. Maintenance planning, objectives, principles, and job planning. 3. Reliability metrics like MTBF, MTTF, and failure rate. 4. Productivity and its relationship to maintenance. 5. Factors that determine maintenance costs and how to reduce costs. The exam is divided into three parts: Part A contains 10 multiple choice questions worth 1 mark each, Part B contains 10 short answer questions worth 2 marks each, and Part C contains 5 long answer questions worth 14 marks each

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    546 views4 pages

    Environmental Management Systems (B) Fault Tree Analysis (C) Failure Mode Effect Analysis (D) Total Productive Maintenance

    Uploaded by

    balajimeie
    This document contains questions from an exam on maintenance engineering. It covers topics such as: 1. Types of maintenance including corrective, preventive, and scheduled maintenance. 2. Maintenance planning, objectives, principles, and job planning. 3. Reliability metrics like MTBF, MTTF, and failure rate. 4. Productivity and its relationship to maintenance. 5. Factors that determine maintenance costs and how to reduce costs. The exam is divided into three parts: Part A contains 10 multiple choice questions worth 1 mark each, Part B contains 10 short answer questions worth 2 marks each, and Part C contains 5 long answer questions worth 14 marks each

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    .

    ME6012 – MAINTENANCE ENGINEERING


    Answer ALL questions

    PART A - (10 X 1 = 10 marks)


    1. Which quality management program is related to the maintenance of plants 1 CO-1 K-2
    and equipments
    (a) Environmental (b) Fault tree (c) Failure mode (d) Total
    management analysis effect productive
    systems analysis maintenance
    2. Gross error means 1 CO-1 K-1
    (a) Magnitude (b) Caused by (c) Human (d) Magnitude and
    &direction electrostatic fault direction are
    vary fields definite
    3. Production cost refers to prime cost plus 1 CO-1 K-1
    (a) factory (b) Administration (c) Sales (d) Sales
    overheads overheads over overheads &
    head profit
    4. Which of the following is unavoidable delay 1 CO-1 K-1
    (a) Waiting (b) Non- (c) Non- (d) Tool
    for raw availability of availability breakage
    material inspection of power
    gauge
    5. -------------- stage of life-cycle associated with an electronic instrument plays a 1 CO-1 K-2
    vital role in establishing a target figure for reliability in terms of specifications.
    (a) Design (b) Manufacturing (c) Production (d) All of the
    above
    6. How is the reliability of a product specified 1 CO-1 K-1
    (a) Always (b) Always (c) Always (d) None of the above
    less than 1 greater equal to
    than 1 1
    7. MTBF means ------------------ 1 CO-1 K-1
    (a) Mean Time (b) Mean (c) Mean (d) All of these
    between Time To Time
    Failures Failures between
    Repair

    8. Which of the following is not counted among safety equipment? 1 CO-2 K-2
    (a) Vacuum (b) Alarms (c) Flashback (d) Temperature
    reliever arresters reliever
    9 What is the ratio of preventive maintenance and total maintenance in primary- 1 CO-2 K-1
    metal industry
    (a) 1 : 1.27 (b) 1 : 2.17 (c) 1 : 2.37 (d) 1 : 3.17 men
    men men men
    10. What type of software testing is generally used in Software Maintenance 1 CO-2 K-2
    (a) Regression (b) System (c) Integration (d) Unit Testing
    Testing Testing Testing

    1
    PART B - (10 X 2 = 20 marks)
    11. Define Maintenance planning 2 CO-1 K- 1
    12. List down the objectives of Maintenance 2 CO-1 K-1
    13. Recall the principles of planned Maintenance activity 2 CO-1 K-2
    14. Infer failure rate 2 CO-1 K-2

    15. Compare Mean Failure Rate and Mean Time to Failure 2 CO-1 K-2

    16. Extend the types of Maintenance Organization 2 CO-1 K-2


    17. State the types of reliability 2 CO-1 K-1
    18. Rephrase the procedure for TPM 2 CO-2 K-2
    19. List the function of lubrication and give tips on lubrication 2 CO-2 K-1
    20. Categorize fixed time maintenance and connect based maintenance 2 CO-2 K-2

    PART C - (5 X 14 = 70 marks)
    Explain the maintenance organization structure in detail

    Discover briefly about different types and classes of maintenance cost

    Enumerate MTBS,MTBF,MTTF,MTTR and failure rate

    Summarize productivity and maintenance.

    State the factors involved in determining the maintenance cost in an industry and
    the steps necessary to reduce the maintenance cost

    Discuss briefly about various steps of maintenance job planning

    Explain in detail the pillars of TPM

    Interpret briefly about repair cycle of metallic materials

    Briefly explain maintenance scheduling

    Elaborate RCM with a flow diagram

    2
    PART A - (10 X 1 = 10 marks)
    1. Maintenance consist of the following action(s)
    (a) Replace of (b) Repair of (c) Service of (d) All of the above
    Componen component component
    t
    2. Scheduled maintenance is _______ between breakdown maintenance and the
    preventive maintenance
    (a) Compromise (b) Failure (c) Ratio (d) None of These
    3. The following is not a classification of maintenance
    (a) Corrective (b) Timely (c) Scheduled (d) Preventive
    maintenance maintenance maintenance maintenance
    4. Quality improvement planning is related to which category of cost
    (a) Cost of (b) Cost of (c) Cost of (d) All of the
    failure appraisal prevention above
    5. A-B-C analysis is used in ----------------
    (a) Inventory (b) production (c) cost (d) None of the
    control control control above
    6. In break even analysis, total cost consists of
    (a) fixed cost (b) variable (c) fixed (d) fixed cost +
    + sales cost + cost + variable cost +
    revenue sales variable profit
    revenue cost
    7. PERT is an event oriented technique.
    (a) Correct (b) Incorrect (c) Insufficient (d) None of the
    technique above
    8. The properties of lubricants are

    (a) viscosity (b) flash point (c) fire point (d) pressure
    9 Which of the following is not an important condition for preventive maintenance?
    (a) Size (b) Age (c) Location (d) Oils used
    10. Which of the following are not counted among periodic inspection
    (a) Tear downs (b) Overhauls (c) Oil (d) Replacement
    burnings of parts

    PART B - (10 X 2 = 20 marks)


    11. Define maintenance
    How would you show your understanding on the benefits of reliability analysis in
    12.
    industries
    13. Write down equipment life cycle and name the various phases in it
    14. Infer failure rate
    15. Compare Mean Failure Rate and Mean Time to Failure
    16. Define Maintenance Action Rate
    17. List out the types of reliability
    18. Differentiate break down maintenance and preventive maintenance
    3
    19. Interpret the purpose of lubrication
    20. Rephrase repair cycle

    PART C - (5 X 14 = 70 marks)
    Explain the maintenance organization structure in detail

    Briefly explain the maintenance economics

    Elaborate the salient features of shut down planning and execution

    Summarize productivity and maintenance.

    State the factors involved in determining the maintenance cost in an industry and
    the steps necessary to reduce the maintenance cost

    Assess long term planning? Discuss few long term planning

    Explain in detail the pillars of TPM

    Interpret planned maintenance. Discuss about preventive maintenance

    Explain in detail the methods of lubrication

    Briefly discuss about the evolution of TPM and the various stages involved in
    implementation of TPM

    You might also like