Upgrading of Existing Fuel Storage and New Truck Loading Facilities Piping Material Specification
Upgrading of Existing Fuel Storage and New Truck Loading Facilities Piping Material Specification
Upgrading of Existing Fuel Storage and New Truck Loading Facilities Piping Material Specification
SERVICE:
DIESEL, GASOIL, JET A1, HVO, GASOLINE, BIO DIESEL, OWS, VAPOUR, SLOP
NOTES:
1. All butt-welded component thicknesses shall match the pipe thickness.
UPGRADING OF EXISTING FUEL STORAGE AND
NEW TRUCK LOADING FACILITIES
20 E T
18 E E T
16 E E E T
14 E E E E T
BRANCH PIPE (SIZE IN INCHES)
12 E E E E E T
10 E E E E E E T
8 W E E E E E E T
6 W W W E E E E E T
4 W W W W W W E E E T
3 W W W W W W W W E E T
2 W W W W W W W W W E E T
1.5 S S S S S S S S S S S E T
1 S S S S S S S S S S S S E T
0.75 S S S S S S S S S S S S E E T
0.5 S S S S S S S S S S S S E E E T
CODE DESCRIPTION
T Tee
E Reducing Tee
S Sockolet
W Weldolet
UPGRADING OF EXISTING FUEL STORAGE AND
NEW TRUCK LOADING FACILITIES
LOWER UPPER
SCH/
ITEM SIZE SIZE DMN.STD DESCRIPTION MATERIAL
THK
(INCH) (INCH)
PIPE GROUP
FITTINGS
LOWER UPPER
SCH/
ITEM SIZE SIZE DMN.STD DESCRIPTION MATERIAL
THK
(INCH) (INCH)
PLUG 0.5 1.5 B-16.11 THRD,3000 ASTM A105
FLANGES
LOWER UPPER
SCH/
ITEM SIZE SIZE DMN.STD DESCRIPTION MATERIAL
THK
(INCH) (INCH)
VALVES
BODY-ASTM A105, TRIM-
API 602 /
GATE 0.5 1.5 SW, 800, B16.11 STELLITED, STEM-13%
ISO 15761
CR.STEEL
FLGD, 150, BODY-ASTM A105, TRIM-
API 602 /
GATE 0.5 1.5 B-16.5 RF, STELLITED, STEM-13%
ISO 15761
/125AARH CR.STEEL
FLGD, 150, BODY-ASTM A216GR.WCB,
API600/
GATE 2 24 B-16.5 RF, TRIM-13% CR.STEEL, HAND
ISO10434
/125AARH WHEEL/GEAR OPERATED
BODY-ASTM A105, TRIM-
API 602 /
GLOBE 0.5 1.5 SW, 800,B16.11 STELLITED, STEM-13%
ISO 15761
CR.STEEL
FLGD, 150, BODY-ASTM A105, TRIM-
API 602 /
GLOBE 0.5 1.5 B-16.5 RF, STELLITED, STEM-13%
ISO 15761
/125AARH CR.STEEL
FLGD, 150, BODY-ASTM A216GR.WCB,
API600/
GLOBE 2 20 B-16.5 RF, TRIM-13%CR.STEEL, HAND
ISO10434
/125AARH WHEEL/GEAR OPERATED
BODY-ASTM A216GR.WCB,
API600/
GLOBE 2 20 BW, 150 TRIM-13%CR.STEEL, HAND
ISO10434
WHEEL/GEAR OPERATED
PISTON API 602 / BODY-ASTM A105 / TRIM-
0.5 1.5 SW, 800, B16.11
CHECK ISO 15761 STELLITED
FLGD, 150,
PISTON API 602 / BODY-ASTM A105 / TRIM-
0.5 1.5 B-16.5 RF,
CHECK ISO 15761 STELLITED
/125AARH
FLGD, 150,
SWING API 594/ BODY-ASTM A216 GR.WCB,
2 24 B-16.5 RF/
CHECK BS 1868 TRIM-13%CR.STEEL
125AARH
WAFER 150, DUAL BODY-ASTM A216 GR.WCB,
12 24 API 594
CHECK PLATES TRIM-13%CR.STEEL
SW X SW, 800,
API 6D/ BODY-ASTM A105, TRIM-
B- 16.11,
BALL 0.5 1.5 BS EN ISO 13%CR.STEEL BODY SEAT-
W/BOTH SIDE
17292 RPTFE, FB
100mm NIPPLE
BODY-ASTM A105/ A216
API 6D/ FLGD, 150, GR.WCB, TRIM-13%
BALL 0.5 24 BS EN ISO B-16.5 RF / CR.STEEL BODY SEAT-
17292 125AARH RPTFE, FB/RB, LEVER / GEAR
OPERATED