Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
69 views

What Are The Software Development Life Cycle (SDLC) Phases?

The document describes the typical phases of the Software Development Life Cycle (SDLC), including: 1) Requirement gathering and analysis, 2) Feasibility Study, 3) Design, 4) Implementation or coding, 5) Testing, 6) Deployment, and 7) Maintenance. It provides details on the key activities and deliverables for each phase of the SDLC.

Uploaded by

Mohammad Zakir
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
69 views

What Are The Software Development Life Cycle (SDLC) Phases?

The document describes the typical phases of the Software Development Life Cycle (SDLC), including: 1) Requirement gathering and analysis, 2) Feasibility Study, 3) Design, 4) Implementation or coding, 5) Testing, 6) Deployment, and 7) Maintenance. It provides details on the key activities and deliverables for each phase of the SDLC.

Uploaded by

Mohammad Zakir
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

What are the Software Development Life

Cycle (SDLC) phases?


There are various software development approaches defined and designed which are
used/employed during development process of software, these approaches are also referred as
“Software Development Process Models” (e.g. Waterfall model, incremental model, V-
model, iterative model, RAD model, Agile model, Spiral model, Prototype model etc.). Each
process model follows a particular life cycle in order to ensure success in process of software
development.

Software life cycle models describe phases of the software cycle and the order in which those
phases are executed. Each phase produces deliverables required by the next phase in the life
cycle. Requirements are translated into design. Code is produced according to the design which
is called development phase. After coding and development the testing verifies the deliverable of
the implementation phase against requirements. The testing team follows Software Testing Life
Cycle (STLC) which is similar to the development cycle followed by the development team.

There are following seven phases in every Software development life cycle model:

1. Requirement gathering and analysis


2. Feasibility Study
3. Design
4. Implementation or coding
5. Testing
6. Deployment
7. Maintenance

1) Requirement gathering and analysis: Business requirements are gathered in


this phase. This phase is the main focus of the project managers and stake
holders. Meetings with managers, stake holders and users are held in order to
determine the requirements like; Who is going to use the system? How will they
use the system? What data should be input into the system? What data should be
output by the system? These are general questions that get answered during a
requirements gathering phase. After requirement gathering these requirements are
analyzed for their validity and the possibility of incorporating the requirements in
the system to be development is also studied.
Finally, a Requirement Specification document is created which serves the
purpose of guideline for the next phase of the model. The testing team follows the
Software Testing Life Cycle and starts the Test Planning phase after the
requirements analysis is completed.
2) Feasibility Study: In case the system proposal is acceptable to the management,
the next phase is to examine the feasibility of the system. The feasibility study is
basically the test of the proposed system in the light of its workability, meeting
user’s requirements, effective use of resources and of course, the cost
effectiveness. These are categorized as technical, operational, economic, schedule
and social feasibility. The main goal of feasibility study is not to solve the
problem but to achieve the scope. In the process of feasibility study, the cost and
benefits are estimated with greater accuracy to find the Return on Investment
(ROI). This also defines the resources needed to complete the detailed
investigation. The result is a feasibility report submitted to the management. This
may be accepted or accepted with modifications or rejected. In short, following
decision are taken in different feasibility study:
Economic feasibility - The likely benefits outweigh the cost of solving the
problem which is generally demonstrated by a cost/ benefit analysis.
Operational feasibility - Whether the problem can be solved in the user’s
environment with existing and proposed system workings?
Organizational feasibility – Whether the proposed system is consistent with the
organization’s strategic objectives?
Technical feasibility - Whether the problem be solved using existing technology
and resources available?
Social feasibility – Whether the problem be solved without causing any social
issues? Whether the system will be acceptable to the society?

3) System Design: Based on the user requirements and the detailed analysis of a
new system, the new system must be designed. This is the phase of system
designing. It is the most crucial phase in the development of a system. The logical
system design arrived at as a result of system analysis and is converted into
physical system design. In the design phase the SDLC process continues to move
from the what questions of the analysis phase to the how . The logical
design produced during the analysis is turned into a physical design - a detailed
description of what is needed to solve original problem. Input, output, databases,
forms, codification schemes and processing specifications are drawn up in detail.
In the design stage, the programming language and the hardware and software
platform in which the new system will run are also decided. Data structure,
control process, equipment source, workload and limitation of the system,
Interface, documentation, training, procedures of using the system, taking
backups and staffing requirement are decided at this stage.
There are several tools and techniques used for describing the system design of
the system. These tools and techniques are: Flowchart, Data flow diagram (DFD),
Data dictionary, Structured English, Decision table and Decision tree

4) Coding: The system design needs to be implemented to make it a workable


system. This demands the coding of design into computer language, i.e.,
programming language. This is also called the programming phase in which the
programmer converts the program specifications into computer instructions,
which we refer to as programs. It is an important stage where the defined
procedures are transformed into control specifications by the help of a computer
language. The programs coordinate the data movements and control the entire
process in a system. A well written code reduces the testing and maintenance
effort. It is generally felt that the programs must be modular in nature. This helps
in fast development, maintenance and future changes, if required. Programming
tools like compilers, interpreters and language like c, c++, and java etc., are used
for coding .with respect to the type of application. The right programming
language should be chosen.

5) Testing :Before actually implementing the new system into operations, a test run
of the system is done removing all the bugs, if any. It is an important phase of a
successful system. After codifying the whole programs of the system, a test plan
should be developed and run on a given set of test data. The output of the test run
should match the expected results. Sometimes, system testing is considered as a
part of implementation process.

Using the test data following test run are carried out:

 Program test
 System test
Program test : When the programs have been coded and compiled and brought to
working conditions, they must be individually tested with the prepared test data.
All verification and validation be checked and any undesirable happening must be
noted and debugged (error corrected).

System Test : After carrying out the program test for each of the programs of the
system and errors removed, then system test is done. At this stage the test is done
on actual data. The complete system is executed on the actual data. At each stage
of the execution, the results or output of the system is analyzed. During the result
analysis, it may be found that the outputs are not matching the expected output of
the system. In such case, the errors in the particular programs are identified and
are fixed and further tested for the expected output. All independent modules be
brought together and all the interfaces to be tested between multiple modules, the
whole set of software is tested to establish that all modules work together
correctly as an application or system or package.

When it is ensured that the system is running error-free, the users are called with
their own actual data so that the system could be shown running as per their
requirements.

6) Implementation: After having the user acceptance of the new system developed,
the implementation phase begins. Implementation is the stage of a project during
which theory is turned into practice. The major steps involved in this phase are:

 Acquisition and Installation of Hardware and Software


 Conversion
 User Training
 Documentation
The hardware and the relevant software required for running the system must be
made fully operational before implementation. The conversion is also one of the most
critical and expensive activities in the system development life cycle. The data from
the old system needs to be converted to operate in the new format of the new system.
The database needs to be setup with security and recovery procedures fully defined.

During this phase, all the programs of the system are loaded onto the user’s
computer. After loading the system, training of the user starts. Main topics of such
type of training are:

 How to execute the package?


 How to enter the data?
 How to process the data (processing details)?
 How to take out the reports?
After the users are trained about the computerized system, working has to shift from
manual to computerized working. The process is called Changeover. The following
strategies are followed for changeover of the system.
1. Direct Changeover: This is the complete replacement of the old system by the new
system. It is a risky approach and requires comprehensive system testing and training.
2. Parallel run : In parallel run both the systems, i.e., computerized and manual, are
executed simultaneously for certain defined period. The same data is processed by both
the systems. This strategy is less risky but more expensive because of the following
facts:

 Manual results can be compared with the results of the computerized system.
 The operational work is doubled.
 Failure of the computerised system at the early stage does not affect the working of the
organization, because the manual system continues to work, as it used to do.
(iii) Pilot run: In this type of run, the new system is run with the data from one or more
of the previous periods for the whole or part of the system. The results are compared with
the old system results. It is less expensive and risky than parallel run approach. This
strategy builds the confidence and the errors are traced easily without affecting the
operations.

The documentation of the system is also one of the most important activity in the system
development life cycle. This ensures the continuity of the system. Generally following
two types of documentations are prepared for any system.

 User or Operator Documentation


 System Documentation
User Documentation: The user documentation is a complete description of the system from
the user’s point of view detailing how to use or operate the system. It also includes the major
error messages likely to be encountered by the user.

System Documentation: The system documentation contains the details of system design,
programs, their coding, system flow, data dictionary, process description, etc. This helps to
understand the system and permit changes to be made in the existing system to satisfy new
user needs.
7) Maintenance : Maintenance is necessary to eliminate errors in the system during
its working life and to tune the system to any variations in its working
environments. It must meet the scope of any future enhancement, future
functionality and any other added functional features to cope up with the latest
future needs. It has been seen that there are always some errors found in the
systems that must be noted and corrected. It also means the review of the system
from time to time. The review of the system is done for:

•knowing the full capabilities of the system

•knowing the required changes or the additional requirements

•studying the performance.


Systems Development Life Cycle (SDLC) puts emphasis on decision making processes
that affect system cost and usefulness. These decisions must be based on full
consideration of business processes, functional requirements, and economic and technical
feasibility. The primary objectives of any SDLC is to deliver quality system which meets
or exceed customer expectations and within cost estimates, work effectively and
efficiently within the current and planned infrastructure, and is an inexpensive to
maintain. SDLC establishes a logical order of events for conducting system development
that is controlled, measured, documented, and ultimately improved.

You might also like