Group 4 Switches
Group 4 Switches
Group 4 Switches
1) START SWITCH
① There are three positions, OFF, ON and START.
· (OFF) : None of electrical circuits activate.
· (ON) : All the systems of machine operate.
· (START) : Use when starting the engine. Release key imme-
diately after starting.
Key must be in the ON position with engine running to maintain
77073CD41
electrical and hydraulic function and prevent serious machine
damage.
H940C3CD60
7-31
(2) 4 Wheel drive select switch (option)
(2
① Press this switch for 4 wheel drive mode.
※ Use 2 wheel drive mode when driving long distance or high speed.
※ Use 4 wheels drive mode when operating in heavy duty site condi-
tions, for instance, deep mud, undulating surfaces, slurry etc.
HB1003CD25
HB1003CD29
HB1003CD24
7-32
3) SIDE CONSOLE SWITCHES
Each switch has an insert with a graphic symbol, this symbol and the switch descriptions are
detailed below. The pilot lamp is turned ON when operating these switches.
H940S3CD61
HB1003CD26
HB1003CD31
7-33
(4) Rear work lights switch
(4
① Press down to switch on the rear work lights. The work lights will
work independently of the main lights circuit.
HB1003CD32
HB1003CD36
HB1003CD56
7-34
(9) Breaker switch (option)
(9
① This switch is used to select breaker operation.
※ The breaker operates only when this switch is selected.
21073CD37
H940C3CD75
HB1003CD34
7-35
4) MULTI-FUNCTION SWITCH
Left turning
(1 Turning switch
(1)
① This switch is used to warn or signal the turning direction of the
machine to other vehicles or equipment.
② Push the lever up for turning left, pull the lever down for turning
Right turning right.
HB1003CD37C
(2 Windscreen wiper
(2)
J O I II
① Rotate the lever barrel to switch the window screen wipers on and
off. The following functions are available.
J Intermittent wipe I Slow
O OFF II Fast
HB1003CD37E
② The wipers will self-park when switched off.
HB1003CD37F
Up
(4 Dimmer switch
(4)
① This switch is used to turn the head lights direction.
② Switch positions
M
·Up : To flash for passing
·Middle : Head lights low beam ON
Down ·Down : Head lights high beam ON
HB1003CD37D
③ If you release the switch when it's in up position, the switch will
return to middle.
(5) Horn
(5
Horn switch Push the button on the top of the multifunction switch, the horn will
sound.
HB1003CD37G
7-36
5) SWITCHES ON CONTROL LEVERS
PILOT
Horn
Multi function switch
Clutch cut-off switch
Clam
Horn switch
H940C3CD65-1
MECHANICAL
Horn
Clutch cut-off switch
Breaker pedal
Extension dipper pedal H940C3CD65-2
7-37
(1) Extending dipper switch/pedal (if fitted)
(1
① This switch is at the top of left side (backhoe side) control lever.
C
On pressing switch "C", the dipper extends.
D
On pressing switch "D" the dipper retracts.
C
D
※ Refer to the page 4-16 details in operator's manual.
D
(LH) C
Pilot Mechanical
H940C3CD12
(2) Breaker
(2 reaker operation switch (if fitted)
① This switch is at the top of right side control lever (backhoe side).
On pressing this switch, the breaker operates.
(RH)
HB1003CD13
(3) Breaker
(3 reaker pedal (if fitted)
① This switch is used to operate the breaker. On pressing this pedal
the breaker operates.
H940C3CD78
(4) Horn
(4 orn switch
① This switch is at the top of right side control lever (backhoe side).
On pressing this switch, the horn sounds.
(RH)
HB1003CD14
(5) Clutch
(5 lutch cut-off switch
① This switch is at the top of right side control lever (loader side).
On pressing, the transmission is cut-off from the engine. This gives
more power to the loader.
(RH)
HB1003CD08
7-38
(6) Clam switch
(6
(1) This switch is at top of right side control lever (loader side).
(2) On pressing this swtich, the clam operates.
Clam
H940C3CD77
6) MASTER SWITCH
(1) This switch is used to shut off the entire electrical system.
O I
(2) I : The battery remains connected to the electrical system.
O : The battery is disconnected to the electrical system.
※ Never turn the master switch to O (OFF) with the engine run-
ning. Engine and electrical system damage could result.
OFF
HB1003CD70
H940C3CD76
7-39