Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 259 views

    2.DCDU Power Connection Standard and Inspection Key Points - PPTX (2.42MB) ...

    Uploaded by

    JULIÁN TRUJILLO
    The document provides inspection guidelines for DCDU power connection failures. It notes that failures can occur due to incorrect installation such as stripping too little of the cable sheath, loose connections, or wires exiting after loosening. The guidelines recommend inspecting for scorching, checking that screws are tightened to 1.4N.m, replacing damaged parts, and reinstalling wires if pulled out. Following the standard installation process can prevent heat issues from high electrical resistance causing burns.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2.DCDU Power Connection Standard and Inspection Key Points - PPTX (2.42MB) ...

    Uploaded by

    JULIÁN TRUJILLO
    259 views10 pages
    The document provides inspection guidelines for DCDU power connection failures. It notes that failures can occur due to incorrect installation such as stripping too little of the cable sheath, loose connections, or wires exiting after loosening. The guidelines recommend inspecting for scorching, checking that screws are tightened to 1.4N.m, replacing damaged parts, and reinstalling wires if pulled out. Following the standard installation process can prevent heat issues from high electrical resistance causing burns.

    Original Description:

    DCDU

    Original Title

    46cb8e00f7fe11e99a36fa163e76180a_2.DCDU Power Connection Standard and Inspection Key Points.pptx (2.42MB)...

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides inspection guidelines for DCDU power connection failures. It notes that failures can occur due to incorrect installation such as stripping too little of the cable sheath, loose connections, or wires exiting after loosening. The guidelines recommend inspecting for scorching, checking that screws are tightened to 1.4N.m, replacing damaged parts, and reinstalling wires if pulled out. Following the standard installation process can prevent heat issues from high electrical resistance causing burns.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    259 views10 pages

    2.DCDU Power Connection Standard and Inspection Key Points - PPTX (2.42MB) ...

    Uploaded by

    JULIÁN TRUJILLO
    The document provides inspection guidelines for DCDU power connection failures. It notes that failures can occur due to incorrect installation such as stripping too little of the cable sheath, loose connections, or wires exiting after loosening. The guidelines recommend inspecting for scorching, checking that screws are tightened to 1.4N.m, replacing damaged parts, and reinstalling wires if pulled out. Following the standard installation process can prevent heat issues from high electrical resistance causing burns.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Security Level:

    DCDU power connection standard

    www.huawei.com

    HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential


    DCDU/Power cable Connection failure Photo

    BBU/RRU cable connector heat or burn up due to wrong installation


    Lead to many sites power fail or down

    HUAWEI TECHNOLOGIES CO., LTD. Page 2


    One page inspection key points
    1. Check the sheath stripping length follow with the 3. Check any power cable not fully insert or any wire come out or not like
    standard or not, should be 18-20mm below showing:

    2. Check the positive and negative cable is reversed by 4. Check the RRU power connection as well should follow above standard
    mistake or, also check the screws tightened at 1.4N.m (there is also logo of standard marked length) like below showing:
    or not like below showing:

    HUAWEI TECHNOLOGIES CO., LTD.


    Root Cause Analysis :
    Scenario 1: the length of Strip sheath off not enough
     The length of Strip sheath off not enough, it cause the contact surface
    Of the wire decreased, So the electric resistance increase, after Long-term use of heat
    lead to burn 。(Q=I²Rt , “R “ increase，lead the Q increase)

    Should follow the installation standard length

    Page 4
    HUAWEI TECHNOLOGIES CO., LTD.
    Scenario 2: the loose of tighten connector or the cable exiting
    after loosening
     Poor fastening of connector lead the contact surface Of the wire decreased, So the
    electric resistance increase, after Long-term use of heat lead to burn 。(Q=I²Rt , “R
    “ increase，lead the Q increase)

    Page 5
    HUAWEI TECHNOLOGIES CO., LTD.
    RRU/DCDU Power connector installation quality
    inspection and rectification guide

    HUAWEI TECHNOLOGIES CO., LTD.


    Inspection/Rectification Guide and Photo reference
     1. Check whether the  2. check the tail of the connector that no
    cable of the connector tail scorching or blackening, Whether there is
    and the connector are pressure to insulation, Use standard fastening
    scorching or blackening; torque 1.4N.m to check if the screw is tightened;

    1.4 N·m

    Page 7
    HUAWEI TECHNOLOGIES CO., LTD.
    Inspection/Rectification Guide and Photo reference
     3. Removing power line of the abnormal parts, Reference installation guide to
    install the wires again, replace the damaged connector;

    EPC5 connector RRU power connector

    Page 8
    HUAWEI TECHNOLOGIES CO., LTD.
    Inspection/Rectification Guide and Photo reference
     4. Tighten the screws to 1.4 N·m (12.39 lbf·in.) using a torque screwdriver;

    1.4 N·m

     5. Check whether the wires are securely installed. If the wires are pulled out
    a bit or exposed outside the holes, remove and cut the split wires, and then
    strip the sheaths and install the wires again.

    Page 9
    HUAWEI TECHNOLOGIES CO., LTD.
    Thank you
    www.huawei.com

    You might also like