DATA SHEET D-210

KBIC ®
Variable Speed DC Motor Controls
For Shunt Wound, PM and AC/DC Motors

1/100 – 11⁄2 Hp @ 115 VAC – 50/60 Hz▲

1/50 – 3 Hp @ 230 VAC – 50/60 Hz▲
TYPICAL APPLICATIONS
• Conveyors • Packaging Machines • Feeders
• Welding Positioners • Pumps
• Machine Tools • Exercise Equipment
• Screening and Printing Equipment
®
*

STANDARD FEATURES
DESCRIPTION
• Plug-in Horsepower Resistor® (see chart) allows a single
model to be used on a wide range of motors The KBIC® full-wave DC motor speed controls are
designed for applications demanding excellent performance,
• MOV Transient Protection
high reliability and low cost. Although compact in size (only
• Trimpots: MIN, MAX, ACCEL, IR & CL 4.30" x 3.64" x 1.25"), these controls offer better than
• Voltage Following 2% regulation over a 50:1 speed range. The controls are
• Inhibit™ and Auto Inhibit® fabricated with components which have proven reliability,
including MOV transient protection, which is used to protect
• Dual Voltage Capable on 230V “D” and “DS” Models
the power bridge. Integrated circuitry is used to provide a
non-complicated design with superior load and line voltage
regulation. Electronic current limiting (CL) protects the
OPTIONAL FEATURES
motor and control against overloads by limiting the
• Auxiliary Heatsink (P/N 9861) extends rating of basic control maximum level of output current. Acceleration start
• Barrier Terminal Accessory Kit (P/N 9863) (adjustable from .5 to 4 seconds) provides a smooth start
• AC Line & Armature Fuse Kit (P/N 9849) each time the AC power is applied.
A unique feature of the KBIC® controls is the Plug-in
• Dial Plate & Knob Kit (P/N 9832)
Horsepower Resistor®. It eliminates the need for recalibrating
IR Comp and Current Limit when the control is used on
SPECIFICATIONS various horsepower motors. Additional versatility is achieved
by using the Auxiliary Heatsink (optional) which is used to
Speed Range (Ratio) ...................................................... 50:1 double the horsepower rating of each model. The output of
the control is a linear function of potentiometer rotation. The
Load Regulation (% Base Speed)
KBIC® can also be operated in a voltage following mode by
(0 – Full Load, 50:1 Speed Range) ................................ 1*
supplying an isolated analog signal (0 – 9VDC) to the input
Line Voltage Regulation (% Base Speed) terminals P2 (+) and F-. The controls are terminated as stan-
(At Full Load, ± 15% Line Variation) ............................ 1/2* dard with Q-D terminals. A Barrier Terminal Accessory Kit is
Control Linearity (% Speed vs. Dial Rotation) ...................... 2 available which incorporates both line and armature fuses.
CL/Torque Range (% Full Load) ................................ 0 – 300 The Inhibit™ circuit (terminals I1 and I2) is provided to
Accel Time Range (Secs.) .......................................... .5 – 4.0 electronically disconnect the armature output voltage.
Another standard feature is Auto Inhibit®. This circuit prevents
Min. Speed Trimpot Range
false starts and high surge currents when cycling the KBIC®
(% Full Speed) ........................................................ 0 – 30*
control with the AC line.
Max. Speed Trimpot Range (% Full Speed) ............ 50 – 140* A variety of models are provided with choices of voltage
Max. Allow. Amb. Temp. and current ratings. Model KBIC-240D operates on both 115
(At Full Rating, °C/°F) .............................................. 45/113 and 230 VAC to provide 0 – 90 and 180 VDC output. Model
KBIC-240DS operates on both 115 and 230 VAC
▲
Maximum rating indicated is with Auxiliary Heatsink. For maximum rating to provide 0 – 90 VDC output. Included with the controls are
without Auxiliary Heatsink see Electrical Rating Chart.
** Performance is for 90V PM motors on 115 VAC and 180V PM motors a 5K remote potentiometer, mounting hardware and
on 230 VAC. operating instructions.

* CE Compliance Requires KBRF-200A RFI Filter

TM

10 A Complete Line of Motor Drives Rev.______(A_______)

 ELECTRICAL RATINGS
Rating Without Auxiliary Heatsink Rating With Auxiliary Heatsink
AC Line Motor Field Voltage
Model KB Part Voltage (Shunt Wound
Voltage Max AC Max DC Maximum Max AC Max DC Maximum
Number Number (VAC) ±15% Motor Only)
(VDC) Load Current Load Current Horsepower Load Current Load Current Horsepower
50/60 Hz (RMS Amps) (Avg. Amps) [Hp, (KW)] (RMS Amps) (Avg. Amps) [Hp, (KW)] (VDC)

KBIC-120 9429 115 0 - 90 9.0 6.0 0.5, (0.4) 18.0 12.0 1, (.75) 50, 100
KBIC-125 9433 115 0 - 90 12.0 8.0 0.75, (0.6) 24.0 16.0 1.5, (1.1) 50, 100
KBIC-240 9428 230 0 - 180 9.0 6.0 1, (.75) 18.0 12.0 2, (1.5) 100, 200
KBIC-225 9432 230 0 - 180 12.0 8.0 1.5, (1.1) 24.0 16.0 3, (2.3) 100, 200
115 0 - 90 0.5, (0.4) 1, (.75) 50, 100
KBIC-240D 9464 9.0 6.0 18.0 12.0
230 0 - 180 1, (.75) 2, (1.5) 100, 200
KBIC-240DS 9423 115 / 230 0 - 90 9.0 6.0 0.5, (0.4) 18.0 12.0 1, (.75) 100

INCHES
MECHANICAL SPECIFICATIONS [mm]
CONNECTION DIAGRAM

BASIC KBIC®
3.64 CONNECTION
(92.46)
3.09 .22
(78.49) (5.59) F-
U

L1 L2
A+
AC LINE
MOUNTING "A" 50/60 Hz
F+ F1 AND F2 ARE
6 SLOTS F1 F2 OPTIONAL FUSES

MOUNTING "B" A-
ACCEL
TAPPED 10-32
MOUNTING "D"

(3 PLACES) P2 I1
3.00 4.30
(76.2) (109.22) I2
MAX P3 P1 MIN CL A
5K POT IR
2 SLOTS

1.50 FUSE MOUNTING ARM FIELD*

(38.1) MAX
TAPPED 6-32 2.15
(54.61) * SHUNT MOTORS ONLY
(2 PLACES)
DWG#: B2600-2-00526

.75 1.75 .64 .25 .950

(19.05) (44.45) (16.26) (6.35) (24.13)
1.813 .18 1.250
(46.05) (4.57 (31.75)
PLUG-IN HORSEPOWER RESISTOR® CHART

Motor Horsepower Range** Plug-in-Horsepower

POTENTIOMETER OPTIONAL AUXILIARY HEATSINK Resistor® Resistance Value
.982
(24.94)
Armature Voltage Armature Voltage (ohms)
3/8 1/2 .500
(12.7) 90 – 130 VDC 180 VDC

1/100 – 1/50 1/50 – 1/25 1.0

CONTROL 1/50 – 1/30 1/25 – 1/15 .51
1/4" ROUND
SHAFT 5.625
1/30 – 1/20 1/15 – 1/10 .35
(142.88)
7.000
(177.8)
1/20 – 1/12 1/10 – 1/6 .25
1/12 – 1/8 1/6 – 1/4 .18
3/8-32
ANTI- BUSHING 3.110 1/8 – 1/5 1/4 – 1/3 .1
ROTATION (78.99)
PIN 1/4 1/2 .05
1/3 3/4 .035
5.625
(142.88)
.125
6.250 1/2 1 .025
(158.75)
(3.06)
P3 3/4* 11⁄2* .015
1.250
P1 P2 (31.75) 1* 2* .01
.438
(11.12)
1.375
11⁄2* 3* .006
(34.93)

* Use with Auxiliary Heatsink – see Electrical Ratings.

** For overlapping motor horsepower range use lower value
DWG#: D2600-1-00281
Plug-in Horsepower Resistor®.

© 1998 KB Electronics, Inc.

KB ELECTRONICS, INC.
12095 NW 39th Street, Coral Springs, FL 33065-2516
(954) 346-4900 • FAX (954) 346-3377
Outside Florida Call TOLL FREE (800) 221-6570
www.kbelectronics.com 11
Rev.______(A_______)