The document contains technical terms related to various topics including:
1. Analogies comparing concepts from different domains such as a dancer's pirouette to a fencer's parry.
2. Opposites such as assist and stop, quell and encourage.
3. Technical terms from computer science, electronics, and electrical engineering including definitions of fetch cycle, program counter, binary representations, components of transistors and logic gates.
4. Questions about topics like impedance, inductive reactance, signal waveforms, voltage values, motor phases, and characteristics of comparators, op-amps, and logic circuits.
The document contains technical terms related to various topics including:
1. Analogies comparing concepts from different domains such as a dancer's pirouette to a fencer's parry.
2. Opposites such as assist and stop, quell and encourage.
3. Technical terms from computer science, electronics, and electrical engineering including definitions of fetch cycle, program counter, binary representations, components of transistors and logic gates.
4. Questions about topics like impedance, inductive reactance, signal waveforms, voltage values, motor phases, and characteristics of comparators, op-amps, and logic circuits.
The document contains technical terms related to various topics including:
1. Analogies comparing concepts from different domains such as a dancer's pirouette to a fencer's parry.
2. Opposites such as assist and stop, quell and encourage.
3. Technical terms from computer science, electronics, and electrical engineering including definitions of fetch cycle, program counter, binary representations, components of transistors and logic gates.
4. Questions about topics like impedance, inductive reactance, signal waveforms, voltage values, motor phases, and characteristics of comparators, op-amps, and logic circuits.
The document contains technical terms related to various topics including:
1. Analogies comparing concepts from different domains such as a dancer's pirouette to a fencer's parry.
2. Opposites such as assist and stop, quell and encourage.
3. Technical terms from computer science, electronics, and electrical engineering including definitions of fetch cycle, program counter, binary representations, components of transistors and logic gates.
4. Questions about topics like impedance, inductive reactance, signal waveforms, voltage values, motor phases, and characteristics of comparators, op-amps, and logic circuits.
7. Adding poles to a transfer function. The TF will lead or lag
8. Program counter count from 0000 to 1111 9. A fetch cycle is the (first part of instruction cycle) 10. A,#data means 11. Memory counter is part of (Ram, Rom, control unit, all of the above) 12. Which one comprise only gates ( Ram, Rom, Hard disk, Core) 13. Unit of impedence (Ohm) 14. Unit of inductive Reactance (Ohm) 15. Which signal has lowest form factor (Triangullar, Square, Rectangular, Sine) 16. Value of AC voltage at 450 (RMS) 17. Phase of induction motor as servometer (2 phase) 18. Binary of 0.6875 (0.1011) 19. Binary of 10 (1010) 20. 1 nible= 4 bits 21. Ladder Logic used in D/A is (R-2R) 22. Peak to RMS value of sine wave is called (crest Factor) 23. Form factor = R.M.S/Avg 24. When emitter junction is forward biased and collector junction is reverse biased the transistor operate in which region (active) 25. SCR has how many junctions (Tri Junction) 26. Current in FET is maximum when Vgs= (0) 27. Difference in BJT and FET is due to absence of _________ ( PN Junction ) 28. The main advantage of FET is (low noise, small size, high power, all of the above) 29. The drawback of BJT is (Noise, Low input impedance) 30. A comparator has output of 5 volt and two resistors of 25KΩ. The input will be (+10, -10, +2.5, -2.5) 31. If change in input appear directly in output the circuit will (comparater, differentiator, integrator) 32. A zener connected parallel with load. If current through load increases then current through zener will (decrease) 33. If gain is double. The gain margin will be (half as gm=1/g) 34. Optical fibre is called light tube or _______ (wave guide) 35. CATV and MATV are types of (Cable) 36. Early language of PLC is ( ladder logic) 37. PLC replaces (Relays) 38. The minimum duration of pulse in pulse triggering system for a thyristor should be at least (10us) 39. A ____ is used to isolate a bit. (mask) 40. Which is not essentially part of microprocessor (I/O and ROM. Ram and Rom, I/O and Ram) 41. The _______counter which is the part of control unit send to the memory the ________ of the next instruction. (Program, Address) 42. At low frequencies Z is low due to Xl is Low 43. The main drawback of feedback control system is (instability)