Corning® SMF-28™ Optical Fiber

Product Information

Optical
Fiber

PI1036
Issued: April 2002
Supersedes: December 2001
ISO 9001 Registered

Corning® Single-Mode Optical Fiber

The Standard For Performance Features And Benefits
Corning® SMF-28TM single-mode optical fiber • Versatility in 1310 nm and 1550 nm
has set the standard for value and performance applications
for telephony, cable television, submarine, and • Enhanced optical properties that optimize
utility network applications. Widely used in the transmission performance
transmission of voice, data, and/or video
services, SMF-28 fiber is manufactured to the • Outstanding geometrical properties for low
most demanding specifications in the industry. splice loss and high splice yield
SMF-28 fiber meets or exceeds ITU-T • OVD manufacturing reliability and product
Recommendation G.652, TIA/EIA-492CAAA, consistency
IEC Publication 60793-2 and GR-20-CORE
• Optimized for use in loose tube, ribbon, and
requirements.
other common cable design
Taking advantage of today’s high-capacity, low-
cost transmission components developed for The Sales Leader
the 1310 nm window, SMF-28 fiber features Corning SMF-28 fiber is the world’s best selling
low dispersion and is optimized for use in the fiber. In 2001, SMF-28 fiber was deployed in over
1310 nm wavelength region. SMF-28 fiber also 45 countries around the world. All types of net-
can be used effectively with TDM and WDM work providers count on this fiber to support net-
systems operating in the 1550 nm wavelength work expansion into the 21st Century.
region.
 Protection And Versatility Attenuation with Bending
Mandrel Number Induced
SMF-28 fiber is protected for long-term perform- Diameter of Wavelength Attenuation*
ance and reliability by the CPC® coating system. (mm) Turns (nm) (dB)
Corning’s enhanced, dual acrylate CPC coatings 32 1 1550 ≤0.50
provide excellent fiber protection and are easy to 50 100 1310 ≤ 0.05
work with. CPC coatings are designed to be 50 100 1550 ≤ 0.10
mechanically stripped and have an outside diameter 60 100 1550 ≤ 0.05
of 245 µm. They are optimized for use in many *The induced attenuation due to fiber wrapped around
a mandrel of a specified diameter.
single- and multi-fiber cable designs including loose
tube, ribbon, slotted core, and tight buffer cables.
Cable Cutoff Wavelength (λccf)
λccf ≤ 1260 nm
Patented Quality Process
Mode-Field Diameter
SMF-28 fiber is manufactured using the Outside
9.2 ± 0.4 µm at 1310 nm
Vapor Deposition (OVD) process, which produces a
10.4 ± 0.8 µm at 1550 nm
totally synthetic ultra-pure fiber. As a result,
Corning SMF-28 fiber has consistent geometric Dispersion
properties, high strength, and low attenuation. Zero Dispersion Wavelength (λ0):
Corning SMF-28 fiber can be counted on to deliver 1302 nm ≤ λ0 ≤ 1322 nm
excellent performance and high reliability, reel after
Zero Dispersion Slope (S0):
reel. Measurement methods comply with ITU
recommendations G.650, IEC 60793-1, and ≤ 0.092 ps/(nm2•km)
Bellcore GR-20-CORE.
4

Optical Specifications
S λ
[
Dispersion = D(λ): ≈ —0 λ – —03 ps/(nm•km),
4 λ ]
Attenuation for 1200 nm ≤ λ ≤ 1600 nm
λ = Operating Wavelength
Wavelength Attenuation* (dB/km)
(nm) Premium Standard
1310 ≤ 0.34 ≤ 0.35
Polarization Mode Dispersion
1550 ≤ 0.20 ≤ 0.22 Fiber Polarization Mode Dispersion (PMD)
*Alternate attenuation values available upon request Value (ps/ km)
PMD Link Value ≤ 0.1*
Point Discontinuity Maximum Individual Fiber ≤ 0.2
No point discontinuity greater than 0.10 dB at either * Complies with IEC 60794-3:2001, section 5.5, Method 1, September 2001.
1310 nm or 1550 nm.
The PMD link value is a term used to describe
Attenuation at the Water Peak the PMD of concatenated lengths of fiber (also
The attenuation at 1383 ± 3 nm shall not exceed known as the link quadrature average). This value
2.1 dB/km. is used to determine a statistical upper limit for
system PMD performance.
Attenuation vs. Wavelength
Range Ref. λ Max. α Difference Individual PMD values may change when cabled.
(nm) (nm) (dB/km) Corning’s fiber specification supports network
1285 - 1330 1310 0.05 design requirements for a 0.5 ps/√km
1525 - 1575 1550 0.05 maximum PMD.
The attenuation in a given wavelength range does not exceed
the attenuation of the reference wavelength (λ) by more than the
value α.

2
Environmental Specifications Mechanical Specifications
Environmental Induced Attenuation Proof Test
Test Condition 1310 nm/1550 nm
(dB/km) The entire fiber length is subjected to a tensile
Temperature Dependence proof stress ≥ 100 kpsi (0.7 GN/m2)*.
-60°C to +85° C * ≤ 0.05 * Higher proof test levels available at a premium.
Temperature-
Humidity Cycling
-10°C to +85 °C*,
Performance Characterizations
up to 98% RH ≤ 0.05 Characterized parameters are typical values.
Water Immersion, 23°± 2°C* ≤ 0.05
Core Diameter: 8.2 µm
Heat Aging, 85° ± 2°C* ≤ 0.05
*Reference temperature = +23°C Numerical Aperture: 0.14
NA is measured at the one percent power level
Operating Temperature Range of a one-dimensional far-field scan at 1310 nm.
-60ºC to +85ºC λ0): 1313 nm
Zero Dispersion Wavelength (λ

Dimensional Specifications Zero Dispersion Slope (S0) : 0.086 ps /(nm2•km)

Length (km/reel): fiber lengths available up to 50.4* Refractive Index Difference: 0.36%
* Longer spliced lengths available at a premium. Effective Group Index of Refraction,
(Neff @ nominal MFD):
Glass Geometry
1.4677 at 1310 nm
Fiber Curl: ≥ 4.0 m radius of curvature 1.4682 at 1550 nm
Cladding Diameter: 125.0 ± 0.7 µm
Core-Clad Concentricity: ≤ 0.5 µm Fatigue Resistance Parameter (nd): 20
Cladding Non-Circularity: ≤ 1.0% Coating Strip Force:
Defined as: [ 1-
Min. Cladding Diameter
Max. Cladding Diameter
x 100 ] Dry: 0.6 lbs. (3N)
Wet, 14-day room temperature: 0.6 lbs. (3N)
Coating Geometry Rayleigh Backscatter Coefficient
(for 1 ns pulse width):
Coating Diameter: 245 ± 5 µm
Coating-Cladding Concentricity: <12 µm 1310 nm: -77 dB
1550 nm: -82 dB

Refractive Index Profile (typical fiber) Spectral Attenuation (typical fiber)

1.0 4.0 nm dB/km

0.9 a 850 1.8
3.5
0.8 b 1300 0.35
c 1310 0.34
∆ Refractive Index (%)

3.0
Attenuation (dB /km)

0.7 d 1383 0.50

0.6 2.5 e 1550 0.19
0.5 a
2.0
0.4
0.3 1.5
d
0.2 1.0 b c
e
0.1
0.5
0.0
-0.1 0.0
-25 -15 -5 0 5 15 25 800 1000 1200 1400 1600

Radius ( µ m) Wavelength (nm)

3
 Ordering Information
To order Corning® SMF-28™ fiber, contact your
sales representative, or call the Optical Fiber
Customer Service Department at 607-248-
2000 or +44-1244-287-437 in Europe.
Please specify the following parameters when
ordering.
Fiber Type: Corning® SMF-28™ Fiber
Fiber Attenuation: dB/km
Fiber Quantity: km
Other: (Requested ship date, etc.)

Corning Incorporated
www.corning.com/opticalfiber
One Riverfront Plaza
Corning, NY 14831
U.S.A.
Phone: 800-525-2524 (U.S. and Canada)
607-786-8125 (International)
Fax: 800-539-3632 (U.S. and Canada)
607-786-8344 (International)
Email: cofic@corning.com
Europe
Phone: 00 800 6620 6621 (U.K.*, Ireland, Italy, France,
Germany, The Netherlands, Spain and Sweden)
+1 607 786 8125 (All other countries)
Fax: +1 607 786 8344
Asia Pacific
Greater China
Australia Beijing
Phone: 1-800-148-690 Phone: (86) 10-6505-5066
Fax: 1-800-148-568 Fax: (86) 10-6505-5077
Indonesia Hong Kong
Phone: 001-803-015-721-1261 Phone: (852) 2807-2723
Fax: 001-803-015-721-1262 Fax: (852) 2807-2152
Malaysia Shanghai
Phone: 1-800-80-3156 Phone: (86) 21-3222-4668
Fax: 1-800-80-3155 Fax: (86) 21-6288-1575
Philippines Taiwan
Phone: 1-800-1-116-0338 Phone: (886) 2-2716-0338
Fax: 1-800-1-116-0339 Fax: (886) 2-2716-0339
Singapore E-mail: GCCofic@corning.com
Phone: 800-1300-955
Fax: 800-1300-956
Thailand
Phone: 001-800-1-3-721-1263
Fax: 001-800-1-3-721-1264
Latin America
Brazil
Phone: 000817-762-4732
Fax: 000817-762-4996
Corning is a registered trademark. SMF-28 and CPC are trademarks of Corning
Mexico Incorporated, Corning, N.Y.
Phone: 001-800-235-1719
Fax: 001-800-339-1472 Any warranty of any nature relating to any Corning optical fiber is only con-
tained in the written agreement between Corning Incorporated and the direct
Venezuela purchaser of such fiber.
Phone: 800-1-4418
Fax: 800-1-4419 ©2002, Corning Incorporated