P802 Flashing Procedure PDF

P802 Flashing Procedure
1. CAUTIONS
I. Flashing & Servicing must be undertaken by qualified personnel only.

II. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn.
III. Use only approved Tools &components as specified in the parts list.
IV. Ensure all components, modules, screws, and insulators are correctly re-fitted after servicing and
alignment
V. Ensure all cables and wires are repositioned correctly if Handset disassembled
VI. Electrostatic discharge can easily damage the sensitive components of electronic products.
Therefore, Service Centre must adhere the precautions which mentioned above.
2. Flashing Procedure
MTK smartphoneMultiple downloading tool operating instructions.
1．General Description
1.1. Software Installation

No need to install, direct COPY entire directory to D: drive
1.2. Power Settings
Power supply output voltage is set manually 4V, current limiting set to 2A.
1.3，Configuration
First open the program, you need to download configuration parameters and files, after which the
program will automatically save settings.
1.4，Start the program:
On the Tools directory which has a SPMultiPortFlashDownloadProject.exe file, double click to run
1.5, Following documents are required：
1）Driver_Auto_Installer_EXE_v1.1236.00.rar
2）SP_MDT_exe_v3.1328.00.00(service_center)
3）Packages
2．Specific steps
2.1，Install the phone driver. Mobile power supply, plug in the USB cable, the computer recognizes the
"New Hardware Wizard" as shown below, select Install from a list or specific location
Figure one
2.1.2 As shown manually select "Browse", select the folder in Driver_AUTO_Installer "infs", Figure II. Click
OK to install phone drivers, Figure III.
Figure two
Figure III
2,2，Projects with AQ4750 download software, version D1-G517-20130813
Example
2.2.1 Download software, make sure package "D1-G517-20130813" There checksum.ini file, as shown in
Figure 4
Figure IV
2.3 Multiple downloads Kit SP_MDT_exe_v3.1328.00.00 (service_center), use Notepad to open
SPMultiPortFlashDownloadProject.ini files, configuration tools, download port, the port is not configured
as illustrated five previous instruments
Figure V
2.3.1 Open SPMultiPortFlashDownloadProject.ini documents, drawing six and find ports will be as shown in
the number of ports for the computer to modify the port number, shown in Figure 7.
Figure VI
Figure VII
2.3.2 The ports port changes from 1 to 16 and kept modifications shown in Figure 8.
Figure eight
2.3.3 The PreloaderPorts port as nine, is amended as 2-17 number, and save the changes, shown in Figure
10. (Note: PreloaderPorts port to port and in front of the modified ports staggered not consistent)
Figure IX
Figure X
2.3.4 Double SPMultiPortFlashDownloadProject.exe file, open download tool, port becomes configured
port (Figure 11).
Figure XI
2.4，Configuration options
A，In the Factory database menu, select setup data source file; choose to tool storage address directory,
select MTK_DATABASE.mdb file (Figure twelve), and open:
Figure XII
B，Under the File menu select open download Agent file; choose to tool storage address directory, select
MTK_Allinone_DA.bin file (Figure thirteen), and open:
Figure XIII
2.5，Select the upgrade file
In Scatter files menu, select Scatter file button (Figure fourteen):
Figure XIV
Select the interface into the software version to upgrade storage address, select the software, select
MT6572_Android_scatter.txt file (Figure fifteen), select and open (Figure sixteen).
Figure XV
Figure XVI
2.6，Select the corresponding COM port。

A，COM port selection is based on download cable plugged into the computer's fixed port may be. Make
sure the COM port: You can in the "My Computer" icon on the right mouse button select Manage -----
Device Manager. A dialog box appears as shown in Figure seventeen. In the red box instructions to
download the cable into the computer's serial port to: COM4. Notice must be in the drive when you
have to install the downloaded appear.
Figure XVII
B，Tool port settings, you can select all, as shown in eighteen red border, the phone will automatically
recognize connected port.
Figure XVIII
2.7，Click Start all. (Figure nineteen), ready to download.
Figure XIX
Then phone (Loading the battery) Connect download cable, start the upgrade (as twenty), red box
marked Show download progress：
Figure twenty
Progress bar to 100%. Upgrade is complete. Figure 21:
Figure Twenty-one
3，Figure 21
3.1， Full stop after the red progress bar does not move: the emergence of DA ERROR. 1, check the
downloaded files with a BIN packages Memory configuration and motherboard correspond; 2, the
download rate reduced by one level to try; 3, the detection download line defines pick the wrong
foot there; 4, while it may be the reason the motherboard hardware .
3.2，Press Start, insert phone press the power button is no response, one that may be downloaded line
driver is not installed. 2, may be incorrect or corrupted download cable. 3, may cause the
motherboard hardware.
3.2 As shown twenty-two tooltip error box for package checksum.ini
Figure twenty-two
3.2 Click the tool start All appear as shown XXIII error window, the port is not configured tool, you need to
configure SPMultiPortFlashDownloadProject.ini document detailing the process see 2.3.2 and 2.3.3
Figure twenty-three
Thanks
For any Query or suggestion, Please write to tech.help@micromaxinfo.com

P802 Flashing Procedure PDF

Uploaded by

Copyright:

Available Formats

P802 Flashing Procedure PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

P802 Flashing Procedure PDF

Uploaded by

Copyright:

Available Formats

P802 Flashing Procedure

I. Flashing & Servicing must be undertaken by qualified personnel only.

MTK smartphoneMultiple downloading tool operating instructions.

1.1. Software Installation

2.6，Select the corresponding COM port。

You might also like