Compresor UP5-22 Part List

72715.07.
34
80448442
Revision A
June 2015
Contact-Cooled Rotary Screw Air Compressor

UP5S 11, UP5S 15, UP5S 18, UP5S 22 (50Hz)
UP6S 15, UP6S 20, UP6S 25, UP6S 30 (60Hz)
Parts Information
Save These Instructions

72715.07.34
Only allow Ingersoll Rand trained Technicians to perform maintenance on this product. For additional information contact Ingersoll Rand
factory or nearest Distributor.
The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased performance and increased
maintenance and may invalidate all warranties.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
TABLE OF CONTENTS
TABLE OF CONTENTS�� 2 dryer sheet metal assembly drawing

and parts list �� 65
PARTS Ordering INFORMATION�� 3
DRYER PIPING ASSEMBLY DRAWING AND
BASE ASSEMBLY drawing and parts list �� 4 PARTS LIST �� 67
RECEIVER TANK (60 HZ, NO DRYER) ASSEMBLY plenum/fan assembly drawing and
drawing and parts list�� 7 parts list �� 82
RECEIVER TANK (50 HZ, NO DRYER) ASSEMBLY starter assembly drawing and parts list�� 89
drawing and parts list�� 14
starter box assembly drawing and
RECEIVER TANK (60 HZ, DRYER) ASSEMBLY parts list �� 90
cooler assembly drawing and parts list �� 105
RECEIVER TANK (50 HZ, DRYER) ASSEMBLY
drawing and parts list�� 27 cooler discharge connection option
assembly drawing and parts list�� 111
AIREND ASSEMBLY drawing and parts list�� 33
PANEL FILTER ASSEMBLY DRAWING AND
SEPARATION SYSTEM drawing and parts list�� 35 PARTS LIST �� 112
SEPARATION SYSTEM parts list�� 36 standard air filter assembly drawing

DRIVE AND SEPARATION SYSTEM ASSEMBLY

drawing and parts list�� 37 HIGH DUST AIR FILTER ASSEMBLY
DRAWING AND PARTS LIST�� 116
SHEAVE AND BELT ASSEMBLY DRAWING�� 44

PORO OPTION ASSEMBLY DRAWING AND
PARTS LIST �� 120
SHEAVE AND BELT ASSEMBLY PARTS LIST�� 45
60 hz decal assembly drawing and
MOTOR CONDUIT ASSEMBLY DRAWING AND parts list �� 123
PARTS LIST �� 46
50 hz decal assembly drawing and
common sheet metal assembly drawing parts list �� 137
RECOMMENDED PARTS LIST�� 151
standard sheet metal assembly drawing
outdoor modification sheet metal assembly

80448442 Rev. A
72715.07.34
PARTS Ordering INFORMATION

These products are designed and constructed to provide long,  Return Goods Policy
trouble-free service. In time it may be necessary to order and install
new parts to replace those that have been subjected to wear. Ingersoll Rand will not accept any returned goods for warranty
or service work unless prior arrangements have been made and
For your convenience and future reference it is recommended that written authorization has been provided from the location where
the following information be recorded. the goods were purchased.
Model Number ________________________________ Products which have been modified without Ingersoll Rand
Serial Number _________________________________ approval, mishandled or misused will not be repaired or replaced
Date Purchased ________________________________ under warranty. A printed copy of the warranty which applies to this
product is provided inside the back cover of this manual.
When ordering replacement parts, please specify the following:
1. Complete model number and serial number as it appears on  Disposal
the data (name) plate.
2. Part number(s) and part description as shown in this manual.
3. Quantity required.
When the life of the product has expired, it is recommended that it

NOTICE be disassembled, degreased and parts separated as to materials so
that they may be recycled.
• Continuing improvement and advancement of design may
cause changes to this equipment which are not included in Refer all communications to the nearest Ingersoll Rand Office or
this manual. Manuals are periodically revised to incorporate Distributor.
changes. Always check the manual edition number on the
front cover for the latest issue.
• Sections of this manual may not apply to your product.
• Using other than genuine Ingersoll Rand replacement parts
may invalidate the warranty.
80448442 Rev. A
72715.07.34
BASE ASSEMBLY drawing and parts list

Assemble Base And Locator Pins
(Dwg. 48776041A2)
PARTS LIST
Item Part No. Description Qty.

1 24770208 BASE, STANDARD 1
2 39138490 PIN, LOCATOR 7
80448442 Rev.A
72715.07.34
BASE (STD NON-TANK MOUNTED) ASSEMBLY drawing and parts list

Assemble Nema 4 Conduit Plug And Fork Lift Hole Covers
(Dwg. 48776041A3)
PARTS LIST

1 22058580 COVER, FORKLIFT OPENING 8
2 39140785 TAPTIPLUG, .50” PUSH IN 1
3 92368687 TAPTITE SCREW M6 x 1 x 12 LG 16
80448442 Rev.A
72715.07.34
BASE (DRYER NON-TANK MOUNTED) ASSEMBLY drawing and parts list

Assemble NEMA 4 Conduit Hole Plug And Fork Lift Hole Covers
(Dwg. 48776041A4)
PARTS LIST

1 22058580 COVER, FORKLIFT OPENING 6
2 39140785 PLUG, .50” PUSH IN 1
3 92368687 TAPTITE SCREW 12
80448442 Rev.A
72715.07.34
RECEIVER TANK (60 HZ, NO DRYER) ASSEMBLY drawing and parts list
Assemble Receiver Tank, Ball Valve And Safety Valve
(Dwg. 22174593A2)
PARTS LIST

1 22055438 VALVE, BALL 1.00 NPT x 1.00 FNPT 1
2 SEE TABLE VALVE, PRESSURE SAFETY 1
3 see TABLE ASSEMBLY, RECEIVER TANK 1
Table For Pressure relief valve and Receiver tank assembly Configuration
Description Pressure relief valve Receiver tank assembly
120 GALLON RECEIVER 125/145 PSI 60 Hz UNITS 39588074 54701115
120 GALLON RECEIVER 200 PSI 60 Hz UNITS 22052450 54701123
240 GALLON RECEIVER 125/145 PSI 60 Hz UNITS 39588074 22050843
240 GALLON RECEIVER 200 PSI 60 Hz UNITS 22052450 22061543
80448442 Rev.A
72715.07.34
Assemble Receiver Tank To Base
(Dwg. 22174593A3)
PARTS LIST

1 54393335 ELBOW, STREET-1/2” DANA #C3409x8 1
2 95937645 ELBOW 1.00 TUBE x 1.00 NPT 1
3 95989638 CONNECTOR, 0.50 NPT x 0.63 FEMALE TUBE 1
4 96704226 SCREW, HEX HEAD FLANGE 4
5 96741830 NUT, HEX FLANGE LOCK SERRATED MI2 4
80448442 Rev.A
72715.07.34
Assemble Air Discharge Tube And Cable Glands
(Dwg. 22174593A4)
PARTS LIST

1 22095913 GLAND, PG-13 CABLE (LIQUID TIGHT FITTING) 1
2 see TABLE TUBE, AIR DISCHARGE 1
3 95937645 ELBOW 1.00 TUBE x 1.00 NPT 1
Table for Air discharge tube

Description Air discharge tube
120 GALLON RECEIVER 125/145 PSI 60 Hz UNITS 85582161
120 GALLON RECEIVER 200 PSI 60 Hz UNITS 85582161
240 GALLON RECEIVER 125/145 PSI 60 Hz UNITS 85584076
240 GALLON RECEIVER 200 PSI 60 Hz UNITS 85584076
80448442 Rev.A
72715.07.34
Assemble Electric Drain Valve And Bracket To Base
(Dwg. 22174593A5)
PARTS LIST

1 32341760 BRACKET, EDV-2000 1
2 37143542 ELBOW, STREET 1/4NPT 1
3 39155478 ELBOW , 0.25 NPT x 0.25 TUBE 1
4 39917489 SCREW, HEX HEAD FLANGE M6 x16.0 LONG ZINC 2
5 95667341 NIPPLE, EXTRA STRONG 0.25 NPT x 0.88 LONG 1
6 54579248 VALVE, ELECTRIC DRAIN (PART OF VALVE ASSEMBLY 54579248) 1
10 80448442 Rev.A
72715.07.34
Assemble Electric Drain Valve Parts To Receiver Tank
(Dwg. 22174593A6)
PARTS LIST

1 39156336 ELBOW 0.25 FNPT x 0.25 TUBE 1
80448442 Rev.A 11
72715.07.34
Assemble Electric Drain Valve Cable Clamps And Drain Tubing
(Dwg. 22174593A7)
PARTS LIST

1 32224537 CLAMP, TUBE 3/8 2
2 39124813 TUBING, 0.25 “ SYNFLEX AR
3 92368687 TAPTITE SCREW M6 x 1x 12 LG 2
AR - ASREQUIRED
12 80448442 Rev.A
72715.07.34
Assemble Electric Drain Valve Cable
(Dwg. 22174593A8)
PARTS LIST

1 54579248 CORD, ELECTRIC DRAIN VALVE ( PART OF VALVE ASSEMBLY 54579248) 1
80448442 Rev.A 13
72715.07.34
Assemble Receiver Tank, Ball Valve And Safety Valve
(Dwg. 22174619C2)
PARTS LIST

1 22061386 VALVE, BALL 1.00 BSPT MALE x1.00 BSPT FEMALE 1
2 22062301 BUSHING, REDUCING 2.00 BSPT MALE x 1.00 BSPT FEMALE 1
3 22062327 CONNECTOR 0.50 BSPT x 0.63 FEMALE TUBE 1
4 SEE TABLE ASSEMBLY, RECEIVER TANK 1
5 92354513 ELBOW, STREET 150# 0.50 FNPT x 0.50 NPT 1
7 96728225 CONNECTOR, 1.00 TUBE x 1.00 BSPT 1
Table for Pressure Safety Valve and Receiver Tank Assembly

Description Pressure Safety Valve Receiver Tank Assembly
500 LITER RECEIVER 14 BAR 50 HERTZ UNITS 92957604 54766811
500 LITER RECEIVER 14 BAR 50 HERTZ UNITS-CHINA 92957604 99289670
500 LITER RECEIVER 14 BAR 50 HERTZ UNITS-INDIA 92957604 22268270
750 LITER RECEIVER 10 BAR 50 HERTZ UNITS 54426580 54766837
750 LITER RECEIVER 10 BAR 50 HERTZ UNITS-CHINA 54426580 99289688
750 LITER RECEIVER 10 BAR 50 HERTZ UNITS-INDIA 54426580 22268296
14 80448442 Rev.A
72715.07.34
Assemble Receiver Tank To Base
(Dwg. 22174619C3)
PARTS LIST

2 96741830 NUT, HEX FLANGE LOCK SERRATED M12-1.75 4
80448442 Rev.A 15
72715.07.34
Assemble Air Discharge Tube And Cable Gland
(Dwg. 22174619C4)
PARTS LIST

1 22095913 GLAND, PG-13 CABLE (LIQUID TIGHT FITTING) 1
2 85560985 HOSE, HYDRAULIC STR x 90⁰ -16 x550.00 LONG 1
3 95937520 CONNECTOR 1.00 TUBE x 1.00 NPT 1
16 80448442 Rev.A
72715.07.34
Assemble Electric Drain Valve And Bracket To Base
(Dwg. 22174619C5)
PARTS LIST

1 32341760 BRACKET, EDV-2000 1
2 37143542 ELBOW, STREET 1/4 NPT 1
3 39155478 ELBOW, 0.25 NPT x 0.25 TUBING 1
4 39917489 SCREW , HEX HEAD FLANGE M6 x 16.0 LONG 2
5 54579248 SOLENOID, NLV (PART OF EDV ASSEMBLY 54579248) 1
6 54579248 TEE, EDV CONNECTOR (PART OF EDV ASSEMBLY 54579248) 1
7 95667341 NIPPLE, EXTRA STRONG 0.25 NPT x 0.88 LONG) 1
80448442 Rev.A 17
72715.07.34
Assemble Electric Drain Valve Parts To Receiver Tank
(Dwg. 22174619C6)
PARTS LIST

1 39156336 ELBOW, 0.25 FNPT x 0.25 TUBE 1
2 54579248 ASSY. , ELECTRIC DRAIN VALVE 1
18 80448442 Rev.A
72715.07.34
Assemble Drain Valve Cable Clamps And Drain Tubing
(Dwg. 22174619C7)
PARTS LIST

1 32224337 CLAMP, TUBE 3/8 2
2 39124813 TUBING, 0.25 INCH SYNFLEX AR
AR - AS REQUIRED
80448442 Rev.A 19
72715.07.34
Assemble Electric Valve Cable
(Dwg. 22174619C8)
PARTS LIST

1 54579248 CORD, ELECTRIC DRAIN VALVE (PART OF VALVE ASSEMBLY 54579248) 1
20 80448442 Rev.A
72715.07.34
RECEIVER TANK (60 HZ, DRYER) ASSEMBLY drawing and parts list
Assemble Ball Valve, Drain Valve And Safety Valve
(Dwg. 22174601A2)
PARTS LIST

1 22055438 VALVE , BALL 1.00 NPT x 1.00 FNPT 1
2 32027120 VALVE, 0.25 “ MANUAL DRAIN 1
5 95944625 BUSHING, REDUCER 0.50 NPT x 0.25 FNPT 1
Table for Pressure Safety Valve and Receiver Tank Assembly

Description Pressure Safety Valve Receiver Tank Assembly
120 GALLON RECEIVER 125/145 PSI 60 Hz DRYER UNITS 39588074 54701115
120 GALLON RECEIVER 200 PSI 60 Hz DRYER UNITS 22052450 54701123
240 GALLON RECEIVER 125/145 PSI 60 Hz DRYER UNITS 39588074 22050843
240 GALLON RECEIVER 200 PSI 60 Hz DRYER UNITS 22052450 22061543
80448442 Rev.A 21
72715.07.34
Assemble Braces
(Dwg. 22174601A3)
PARTS LIST

1 22171516 BRACE, STIFFENER (TANK MOUNTED DRYER) 2
2 22171524 SPACER, BASE (TANK MOUNTED DRYER) 2
22 80448442 Rev.A
72715.07.34
Assemble Receiver To Base
(Dwg. 22174601A4)
PARTS LIST

1 96727920 SCREW, HEX HEAD FLANGE MI1 x 30.0 LONG 4
2 96741830 NUT, HEX FLANGE LOCK SERRATED MI2 4
80448442 Rev.A 23
72715.07.34
Assemble Elbows To Dryer
(Dwg. 22174601A5)
PARTS LIST

2 95937645 ELBOW 1.00 TUBE x 1.00 NPT 1
24 80448442 Rev.A
72715.07.34
Assemble Elbow
(Dwg. 22174601A6)
PARTS LIST

1 95937645 ELBOW, 1.00 TUBE x 1.00 NPT 1
80448442 Rev.A 25
72715.07.34
Assemble Air Discharge Tube
(Dwg. 22174601A7)
PARTS LIST

1 see TABLE TUBE, DRYER TO RECEIVER TANK 1
Table For Tube

Group Tube
120 GALLON RECEIVER 125/145 PSI 60 Hz DRYER UNITS 22171540
120 GALLON RECEIVER 200 PSI 60 Hz DRYER UNITS 22171540
240 GALLON RECEIVER 125/145 PSI 60 Hz DRYER UNITS 22171557
240 GALLON RECEIVER 200 PSI 60 Hz DRYER UNITS 22171557
26 80448442 Rev.A
72715.07.34
Assemble Ball Valve, Drain Valve And Safety Valve
(Dwg. 22174627A2)
PARTS LIST

1 22061386 VALVE, BALL 1.00 BSPT MALE x 1.00 BSPT FEMALE 1
2 22062301 BUSHING REDUCING 2.00 BSPT MALE x 1.00 BSPT FEMALE 1
4 92258706 VALVE, 0.25 “ MANUAL DRAIN MANUAL DRAIN 1
5 92354380 BUSHING REDUCING 1/2 x1/4 BSP 1
6 92785260 PLUG, 1.00 “ BSPP 1
Table For Pressure Safety Valve And Receiver Tank Assembly

Group Pressure Safety Valve Receiver Tank Assembly
500 LITER RECEIVER 14 BAR 50 HERTZ DRYER UNITS 92957604 54766811
500 LITER RECEIVER 14 BAR 50 Hz DRYER UNITS - CHINA 92957604 99289670
500 LITER RECEIVER 14 BAR 50 Hz DRYER UNITS - INDIA 92957604 22268270
750 LITER RECEIVER 10 BAR 50 HERTZ DRYER UNITS 54426580 54766837
750 LITER RECEIVER 10 BAR 50 HZ DRYER UNITS-CHINA 54426580 99289688
750 LITER RECEIVER 10 BAR 50 HZ DRYER UNITS-INDIA 54426580 22268296
80448442 Rev.A 27
72715.07.34
Assemble Braces
(Dwg. 22174627A3)
PARTS LIST

1 22171516 BRACE, STIFFENER (TANK MOUNTED DRYER) 2
2 22171524 SPACER, BASE (TANK MOUNTED DRYER) 2
28 80448442 Rev.A
72715.07.34
Assemble Receiver To Base
(Dwg. 22174627A4)
PARTS LIST

1 96741830 NUT, HEX FLANGE LOCK SERRATED M12 4
2 96744891 SCREW, HEX HEAD FLANGE M12 X 35.0 LONG 4
80448442 Rev.A 29
72715.07.34
Assemble Elbow To Dryer
(Dwg. 22174627A5)
PARTS LIST

2 96727870 ELBOW, 90 1.00 TUBE 1.00 BSPT 1
30 80448442 Rev.A
72715.07.34
Assemble Elbow
(Dwg. 22174627A6)
PARTS LIST

1 22062301 BUSHING, REDUCING 2.00 BSPT MALE x 1.00 BSPT FEMALE 1
2 96727870 ELBOW, 90 1.00 TUBE 1.00 BSPT 1
80448442 Rev.A 31
72715.07.34
(Dwg. 22174627A7)
PARTS LIST

1 SEE TABLE TUBE, DRYER TO RECEIVER TANK 1
Table For Tube To Receiver Tank

Description Tube To Receiver Tank
500 LITER RECEIVER 14 BAR 50 HERTZ DRYER UNITS 22171813
500 LITER RECEIVER 14 BAR 50 Hz DRYER UNITS - CHINA 22171813
500 LITER RECEIVER 14 BAR 50 Hz DRYER UNITS - INDIA 22171813
750 LITER RECEIVER 10 BAR 50 HERTZ DRYER UNITS 22171821
750 LITER RECEIVER 10 BAR 50 HZ DRYER UNITS-CHINA 22171821
750 LITER RECEIVER 10 BAR 50 HZ DRYER UNITS-INDIA 22171821
32 80448442 Rev.A
72715.07.34
AIREND ASSEMBLY drawing and parts list
19
12
15
28 26 20
27 18
14
23
22
1 21
2
11
25 13 3
22
6 29
24
7 22 23
8
5 17
10
9 16
4
(Dwg. 24692188A)
PARTS LIST

1 22637219 AIREND 1
2 23430556 GASKET, DISCHARGE ADAPTER 1
3 23430564 GASKET, AIREND SPACER 1
4 85581866 TUBE 1
5 42684811 GASKET, INLET VALVE 2
6 54749106 BRACKET, GAS SPRING 1
7 54749098 LINK, GAS SPRING TOGGLE 1
8 54749114 SPRING, GAS 1
9 96728233 SCREW, SOCKET HEAD SHOULDER M8-1.25 x 16 LONG 1
10 96701404 WASHER, PLAIN GRADE C, 10 1
11 85581858 TUBE, COOLANT FEED (REAR BEARING) 1
12 85581882 TUBE, SCAVENGE 1
13 54747399 ASSEMBLY, INTAKE VALVE 1
15 22097208 INDICATOR, INLET RESTRICTION 1
80448442 Rev.A 33
72715.07.34
AIREND ASSEMBLY parts list

PARTS LIST

16 96739727 CONNECTOR 1
17 95952867 CONNECTOR, 0.75 TUBE x 1.06 SAE 1
18 95993572 ELBOW, 0.31 TUBE x 0.50 SAE 1
19 39155650 ELBOW, 0.25 NPT x 0.38 INCH TUBING 1
20 96739701 CONNECTOR, 0.31 TUBE x M12 PARALLEL THREAD 1
21 54775556 ELBOW, 90˚ CHECK VALVE (0.787 mm/0.031 inch ORIFICE) 1
22 96721097 WASHER, SPRING LOCK, CURVED TYPE A, M16 10
23 96738513 SCREW, HEX HEAD M16-2 x 45 INCH LONG 8
24 96703186 SCREW, HEX HEAD M16-2 x 35 INCH LONG 2
25 39155478 ELBOW, 0.25 NPT X 0.25 INCH TUBING 1
26 95928230 PLUG, SOCKET 0.25 NPT 1
27 54774997 ADAPTOR, ORIFICE 3.4mm (BLOWDOWN) 1
28 39156419 CONNECTOR, 0.25 NPT x 0.38 INCH TUBING 1
29 96728431 NUT, M8-1.25 1
34 80448442 Rev.A
72715.07.34
SEPARATION SYSTEM drawing and parts list
18
15
16
14
17
19
11
12
20 22
11
21
13
5
24 10
23
9
8
7
1 5
3
4
(Dwg. 24692188A)
PARTS LIST

54728100 ASSEMBLY, SEPARATOR ASME U/LLOYDS 1
1
54728118 ASSEMBLY, SEPARATOR TANK (CE-10/UM/CRN/SQL/UDT) 1
2 95943635 PLUG, HEX 2.50 SAE 1
3 54723341 VALVE, MINI BALL 0.38 NPT 1
4 95928222 PLUG, SOCKET 0.38 NPT 1
5 95938163 ELBOW, 0.75 INCH TUBE x 1.06 SAE 2
6 85581874 TUBE, SEPARATOR TO VMC BLOCK 1
7 54729876 GASKET, SEPARATOR COVER (PART OF TANK) 1
8 - PLATE, COVER (PART OF TANK) 1
9 - WASHER (PART OF TANK) 8
10 - SCREW (PART OF TANK) 8
11 89209217 ASSEMBLY, ELBOW BANJO 0.25 BSPP x 10mm 2
12 22813133 REDUCER 0.25 BSPT MALE x 0.25 BSPP FEMALE 2
13 22051296 DECAL, COOLANT LEVEL 1
14 96960513 ADAPTER, TUBE FITTING 1
15 54672654 ELEMENT, COOLANT FILTER 1
80448442 Rev.A 35
72715.07.34
SEPARATION SYSTEM parts list

PARTS LIST

16 96741780 SCREW, SOCKET HEAD M10 x 45 LONG 4
17 39156393 CONNECTOR, 0.13 NPT x 0.25 INCH TUBING 1
18 54749247 ELEMENT, SEPARATOR 1
19 39155650 ELBOW, 0.25 NPT X 0.38 INCH TUBING 1
20 24864639 ASSEMBLY, CAST COMBINATION BLOCK 1
22052450 VALVE, SAFETY (60 Hz) 1
21
22057954 VALVE, SAFETY (50 Hz) 1
22 54740444 TUBE, COOLANT SIGHT 1
23 23434921 GASKET, COMBINATION BLOCK 1
24 96952122 CONNECTOR, 1.00 INCH TUBE x 1.63 SAE 1
* 54740451 SHAFT, MOTOR PIVOT
* NOT ILLUSTRATED
36 80448442 Rev.A
72715.07.34
DRIVE AND SEPARATION SYSTEM ASSEMBLY drawing and parts list

Assemble Separator Pivot Stop Brace
(Dwg. 22171276G2)
PARTS LIST

1 23228067 BRACE, MANUAL SEPARATOR STOP 1
2 39917489 SCREW, HEX HEAD FLANGE M6 x 16.0 LONG 2
80448442 Rev.A 37
72715.07.34

Assemble Motor Support Drawing And Parts List
(Dwg. 22171276G3)
PARTS LIST

1 see table SUPPORT, MOTOR 1
Table For Motor Frame

Motor Frame Support
160 54727870
180 54727888
38 80448442 Rev.A
72715.07.34

Assemble Motor To Support
(Dwg. 22171276G4)
PARTS LIST

1 see table MOTOR, DRIVE 1
2 see table SCREW, HEX HEAD FLANGE 4
80448442 Rev.A 39
72715.07.34
DRIVE AND SEPARATION SYSTEM parts list

Assemble Motor To Support
Table For Motor And Screw
Group Motor Screw
15 HP 208-230/460V TEFC 24504920 96745310
15 HP 380V TEFC 24504938 96745310
15 HP 575V TEFC 24504946 96745310
20 HP 208-230/460V TEFC 24504961 96745310
20 HP 380V TEFC 24504979 96745310
20 HP 575V TEFC 24504987 96745310
25 HP 208-230/460V TEFC 24505000 96741814
25 HP 380V TEFC 24505018 96741814
25 HP 575V TEFC 24505026 96741814
30 HP 208-230/460V TEFC 24505042 96741814
30 HP 380V TEFC 24505059 96741814
30 HP 575V TEFC 24505067 96741814
11 KW 220V IP55 22236905 96727920
11 KW 380V IP55 22236913 96727920
11 KW 400V IP55 22236921 96727920
11 KW 550V IP55 22236939 96727920
15 KW 220V IP55 54735907 96727920
15 KW 380V IP55 22124689 96727920
15 KW 400V IP55 54735915 96727920
15 KW 550V IP55 54735923 96727920
18.5 KW 220V IP55 54735931 96727920
18.5 KW 380V IP55 22124697 96727920
18.5 KW 400V IP55 54735949 96727920
18.5 KW 550V IP55 54735956 96727920
22 KW 220V IP55 54735964 96727920
22 KW 380V IP55 22124705 96727920
22 KW 400V IP55 54735972 96727920
22 KW 550V IP55 54735980 96727920
40 80448442 Rev.A
72715.07.34

Assemble Separator Assembly
(Dwg. 22171276G5)
PARTS LIST

1 see table PLUG, OIL FILL 1
2 39224209 WASHER, NYLON 2
3 see table ASSEMBLY, SEPARATOR TANK 1
Table For Tank Assy. and Oil Plug

Description Tank Assy
CE-10/UM/CRN/SQL/UDT 54775010
2
asme u/lloyds 54775002
Description Oil Fill Plug

ultra 23176068
ULTRA EL 24134769
ULTRA FG 24134777
80448442 Rev.A 41
72715.07.34
DRIVE AND SEPARATION SYSTEM ASSEMBLY DRAWING AND PARTS LIST

Assemble Finger Guard And Cotton Pins
(Dwg. 22171276G6)
PARTS LIST

1 22065890 GUARD, FINGER 1
2 92368687 TAPTITE SCREW M6 X 1 X 12 LG 2
3 95433819 PIN, COTTER (SPLIT) QUICK RELEASE 0.125 DIA 2
42 80448442 Rev.A
72715.07.34
DRIVE AND SEPARATION SYSTEM ASSEMBLY DRAWING AND PARTS LIST

Assemble Shipping Brace
(Dwg. 22171276G7)
PARTS LIST

1 22082754 BRACKET, SHIPPING 1
2 96705645 WASHER, PRODUCT GRADE A M16 1
3 96737556 SCREW , HEX HEAD FLANGE M10 X 25.0 LONG 1
80448442 Rev.A 43
72715.07.34
SHEAVE AND BELT ASSEMBLY DRAWING

Sheaves And Belt To Motor And Airend
SEE TABLE
SEE TABLE
SEE TABLE SEE TABLE
(Dwg. 22171284B2)
44 80448442 Rev.A
72715.07.34
SHEAVE AND BELT ASSEMBLY PARTS LIST

Sheaves And Belt To Motor And Airend
PARTS LIST

1 sEE TABLE BUSHING, TAPERLOCK 1
2 sEE TABLE SHEAVE, DRIVE MOTOR 1
3 sEE TABLE BELT, POLY-V DRIVE 1
4 sEE TABLE SHEAVE, AIREND 1
5 92751130 PLATE, REATAINING 1
6 96703186 SCREW, HEX HEAD M16 X 35.0 LONG 1
Table For Bushing, Sheave And Belt

Group Bushing, Taperlock Sheave, Drive Belt, Poly-v Drive Sheave, Airend
Motor
15HP 125 PSI 60 Hz 22083448 22108351 22108393 22178057
15HP 150 PSI 60 Hz 22083448 22108351 22108427 22178065
20HP 125 PSI 60 Hz 22083448 22108351 89265060 22107536
20HP 145 PSI 60 Hz 22083448 22108351 89265078 22178040
20HP 200 PSI 60 Hz 22083448 22108351 22108393 22178057
25HP 125 PSI 60 Hz 22083448 22108351 89265052 22107585
25HP 145 PSI 60 Hz 22083448 22108351 89265060 22107593
25HP 200 PSI 60 Hz 22083448 22108351 89265078 22107601
30HP 125 PSI 60 Hz 22083448 22108369 89265060 22107619
30HP 145 PSI 60 Hz 22083448 22108369 89265060 22107627
30HP 200 PSI 60 Hz 22083448 22108351 89265060 22107635
11kW 7.5 BAR 50 Hz 22077275 22108369 22108393 22107643
11kW 8.5 BAR 50 Hz 22077275 22108369 22108393 22107577
11kW 10 BAR 50 Hz 22077275 22108377 22108401 22107650
15kW 7.5 BAR 50 Hz 22077275 22108369 89265060 22107676
15kW 8.5 BAR 50 Hz 22077275 22108369 89265060 22108302
15kW 10 BAR 50 Hz 22077275 22108369 89265078 22107684
15kW 14 BAR 50 Hz 22077275 22108377 22108427 22107692
18.5kW 7.5 BAR 50 Hz 22077267 22108377 89265060 22107700
18.5kW 8.5 BAR 50 Hz 22077267 22108377 89265060 22108310
18.5kW 10 BAR 50 Hz 22077267 22108369 89265052 22107718
18.5kW 14 BAR 50 Hz 22077267 22108377 22108393 22107726
22kW 7.5 BAR 50 Hz 22077267 22108377 89265052 22107734
22kW 8.5 BAR 50 Hz 22077267 22108377 89265052 22108328
22kW 10 BAR 50 Hz 22077267 22108377 89265060 22107742
22kW 14 BAR 50 Hz 22077267 22108369 89265060 22107759
80448442 Rev.A 45
72715.07.34
motor conduit ( 60 hz)

assembly drawing and parts list
Motor Conduit(60 Hz S/D TEFC)
(Dwg. 22174023B2)
PARTS LIST

1 49141963 ASSEMBLY MOTOR, CONDUIT 1
46 80448442 Rev.A
72715.07.34
MOTOR CONDUIT ASSEMBLY DRAWING AND PARTS LIST

Assemble Motor Conduit
SEE TABLE
(Dwg. 22174023A2)
PARTS LIST

1 see TABLE ASSEMBLY, CONDUIT 1
Table For Motor Conduit

Description Motor Conduit
50 HERTZ MOTOR CONDUIT (22KW - 220V UNITS) 22207278
50 HERTZ MOTOR CONDUIT (15-18.5 KW / 220 VOLT UNITS ) 22113153
50 HERTZ MOTOR CONDUIT (400 VOLT UNITS) 22090963
80448442 Rev.A 47
72715.07.34
common sheet metal assembly drawing and parts list

Assemble Left End Corners
(Dwg. 22170476D2)
PARTS LIST

1 54747746 CORNER, FRONT 1
2 54747753 CORNER, RIGHT REAR 1
48 80448442 Rev.A
72715.07.34

Assemble Left End Channel
(Dwg. 22170476D3)
PARTS LIST

1 54747761 CHANNEL, RIGHT SIDE 1
80448442 Rev.A 49
72715.07.34

Assemble Finger Guards
(Dwg. 22170476D4)
PARTS LIST

1 22089601 PLATE, FINGER GUARD 2
50 80448442 Rev.A
72715.07.34

Assemble Cooler Corner
(Dwg. 22170476D5)
PARTS LIST

1 see table CORNER, COOLER SIDE 18.5-22 kW 1
2 92368687 TAPTITE SCREW M6 x 1 x12 LG 2
3 96742689 BOLT, HEX FLANGE M6-1.00 x 16.0 LONG 2
Table For Corner, Cooler Side

Description Corner, cooler side
COMMON ENCLOSURE (18.5 - 22kW / 25-30HP) 22095251
COMMON ENCLOSURE (11-15kW / 15-20HP UNITS) 22132336
80448442 Rev.A 51
72715.07.34

Assemble Front Channel
(Dwg. 22170476D6)
PARTS LIST

1 22092886 CHANNEL, LONG SIDE 1
52 80448442 Rev.A
72715.07.34

Assemble Rear Channel
(Dwg. 22170476D7)
PARTS LIST

1 22093025 CHANNEL, REAR 1
80448442 Rev.A 53
72715.07.34

Assemble Sheave Guard Panel
(Dwg. 22170476D8)
PARTS LIST

1 22088439 FOAM, SHEAVE GUARD PANEL 1
2 54747852 PANEL, SHEAVE GUARD 1
54 80448442 Rev.A
72715.07.34

Assemble Rear Panel
(Dwg. 22170476D9)
PARTS LIST

1 22053433 CAP, PLASTIC 18 mm HOLE 6
2 39117312 GASKET, STRIP 0.06 THK x 0.75 WIDE W/ADHESIVE BACK ar
3 54753942 PANEL, REAR 1
4 54763347 FOAM, REAR PANEL 1
5 96742689 BOLT, HEX FLANGE M6 -1.00 x 16.0 LONG 6
AR - AS REQUIRED.
80448442 Rev.A 55
72715.07.34

Assemble Top Exhaust Panel
(Dwg. 22170476D10)
PARTS LIST

2 22092993 FOAM, TOP EXHAUST PANEL 1
3 22093017 PANEL, TOP EXHAUST 1
4 39117312 GASKET, STRIP 0.06 THK x 0.75 WIDE W/ADHESIVE BACK AR
5 96742689 BOLT, HEX FLANGE M6-1.00 X 16.0 LONG 8
AR - AS REQUIRED
56 80448442 Rev.A
72715.07.34

Assemble Top Cooler Access Panel
(Dwg. 22170476D11)
PARTS LIST

3 54753983 PANEL, REMOVABLE TOP 1
4 54763354 FOAM, REMOVABLE TOP PANEL 1
AR - AS REQUIRED
80448442 Rev.A 57
72715.07.34

Assemble Front Panel
(Dwg. 22170476D12)
PARTS LIST

1 22091193 HINGE, LIFT OFF (RIGHT HAND) 2
2 22092951 PANEL, FRONT DOOR 1
3 22092985 FOAM, FRONT ACCESS PANEL 1
4 23180557 LATCH, DOOR (NEMA 4) 28 mm HEAD/28 mm OFFSET 2
6 96743992 MACHINE SCREW, FLAT HEAD M6 x16 4
AR - AS REQUIRED
58 80448442 Rev.A
72715.07.34
standard sheet metal assembly drawing and parts list

Assemble Top Exhaust Panel Cap Plugs
(Dwg. 22171003C2)
PARTS LIST

80448442 Rev.A 59
72715.07.34
standard sheet metal assembly drawing and parts list

Assemble Left End Panel
(Dwg. 22171003C3)
PARTS LIST

2 39117312 GASKET, STRIP 0.06THK x 0.75 WIDEW/ADHESIVE BACK AR
3 54747779 PANEL, LEFT END 1
4 54763339 FOAM, LEFT END PANEL 1
5 96742689 BOLT, HEX FLANGE M6-1.00 x 16.0LONG 6
AR - AS REQUIRED
60 80448442 Rev.A
72715.07.34
outdoor modification sheet metal assembly drawing and parts list

Assemble Intake Louver
(Dwg. 22170997C2)
PARTS LIST

1 22053730 LOUVER, AIR INTAKE(OUTDOOR MODIFICATION) 1
2 92368687 TAPTITE SCREWM6 x 1 x 12 LG 6
80448442 Rev.A 61
72715.07.34

Assemble Compressor Exhaust Hood
(Dwg. 22170997C3)
PARTS LIST

1 22127328 BOX, COMPRESSOREXHAUST (OUTDOOR MODIFICATION) 1
2 39117312 GASKET, STRIP 0.06THK x 0.75 WIDE W/ADHESIVE BACK AR
3 92368687 TAPTITE SCREWM6 x 1 x 12 LG 8
AR - AS REQUIRED
62 80448442 Rev.A
72715.07.34

Assemble Package Exhaust Louver
(Dwg. 22170997C4)
PARTS LIST

1 22127500 LOUVER, AIR EXHAUST 1
80448442 Rev.A 63
72715.07.34

Assemble Package Air Exhaust Louver Hood
(Dwg. 22170997C5)
PARTS LIST

1 22134597 HOOD, ODM EXHAUST 1
64 80448442 Rev.A
72715.07.34
dryer sheet metal assembly drawing and parts list

Assemble Dryer Left End Panel
(Dwg. 22171011E2)
PARTS LIST

1 22097869 COVER, DRYER TOP 1
80448442 Rev.A 65
72715.07.34
dryer sheet metal assembly drawing and parts list

Assemble Dryer Left End Panel
(Dwg. 22171011E3)
PARTS LIST

1 22053433 CAP, PLASTIC18 mm HOLE 8
2 23321920 ASSEMBLY, DRYER PANEL(SHEETMETAL/FOAM) (OMI) 1
3 96742689 BOLT, HEX FLANGE M6-1.00 x16.0 LONG 8
66 80448442 Rev.A
72715.07.34
DRYER PIPING ASSEMBLY DRAWING AND PARTS LIST

Assemble Dryer Box To Enclosure
(Dwg. 22179618L2)
PARTS LIST

1 SEE TABLE DRYER 1
3 96742689 BBOLT, HEX FLANGEM6-1.00 x 16.0 LONG 2
Table For Dryer Configuration

P/N Description
23318082 DRYER, OMI 11-15KW 50HZ
23318090 DRYER, OMI 15-20HP 60HZ
23335631 DRYER, OMI 25-30HP 60HZ
23335672 DRYER, OMI 18.5-22KW 50HZ
80448442 Rev.A 67
72715.07.34
Dryer piping ASSEMBLY drawing and parts list

Assemble Brackets
5 4
96742689 92368687
4x 4x
3
SEE TABLE
1x 2
22100556
1x
1
22097968
1x
(Dwg. 22179618L3)
PARTS LIST

1 22097968 COVER, AIR FILTER 1
2 22100556 SUPPORT, DRYERDISCHARGE PIPING 1
22100648 BRACKET, DRYER PIPING DISCHARGE(1.00 “ NPT) 1
3
22100655 BRACKET, DRYER PIPING DISCHARGE(1.00 “ BSPT) 1
5 96742689 BOLT, HEX FLANGEM6-1.00 x 16.0 LONG 4
68 80448442 Rev.A
72715.07.34

Assemble Grommet And Bulk Head Fittings
(Dwg. 22179618L4)
PARTS LIST

1 50677459 ADAPTER, BULKHEAD1/4’’ NPT X 3/4’’ UNF 3
2 85583367 GROMMET, INSULATION 0.3125 “ I.D. 1
80448442 Rev.A 69
72715.07.34

Assemble Drain Line Fittings
(Dwg. 22179618L5)
PARTS LIST

1 22132971 CONNECTOR, 8 mm TUBE (BARB) 0.25 “ MALE NPT 2
70 80448442 Rev.A
72715.07.34

Assemble Hose From Cooler To Moisture Separator
(Dwg. 22179618L6)
PARTS LIST

3 95937645 ELBOW, 1.00 TUBE x 1.00 NPT 1
80448442 Rev.A 71
72715.07.34

Assemble Moisture Separator
(Dwg. 22179618L7)
PARTS LIST

1 22101083 SEPARATOR, MOISTURE(1.0 “ NPT) 1
3 95937520 CONNECTOR, 1.00 TUBE x 1.00 NPT 1
72 80448442 Rev.A
72715.07.34
Dryer piping (W/BYPASS) ASSEMBLY drawing and parts list

Assemble Dryer Piping
(Dwg. 22179618L8)
PARTS LIST

1 22097588 VALVE, 3-WAY BALL 0.75 “ FEMALE NPT 1
3 95937637 ELBOW, 0.75 TUBE x 0.75 NPT 1
4 95937652 ELBOW, 1.00 TUBE x 0.75 NPT 1
6 95996153 UNION, FEMALE 0.75 NPT 150LB 1
80448442 Rev.A 73
72715.07.34

Assemble Dryer Piping
(Dwg. 22179618L9)
PARTS LIST

1 32106569 VALVE, BALL(0.75 “ FEMALE NPT) 1
6 95954269 TEE, STREET 150 LB. 0.75 FNPT x 0.75 NPT 1
7 95996153 UNION, FEMALE 0.75 NPT 150LB 1
74 80448442 Rev.A
72715.07.34

Assemble Air Filter And Piping
(Dwg. 22179618L10)
PARTS LIST

1 22070825 TUBE, DRYER INLET 1
3 24233686 FILTER (FA230IG), 1’’ NPT, 135 SCFM, AUTO DRAIN 1
4 85560274 HOSE, HYDRAULIC STR X STR -12 x 22.00 LONG 1
5 85560985 HOSE, HYDRAULIC 90 X STR -16 x 18.00 LONG 1
7 97271886 COUPLING, 0.25 IN”CH NPT BRASS 1
80448442 Rev.A 75
72715.07.34

Assemble Fittings
SEE TABLE
(Dwg. 22179618L11)
PARTS LIST

95937520 CONNECTOR, 1.00 TUBE x 1.00 NPT 1
2
96728225 CONNECTOR, 1.00 TUBE x 1.00 BSPT 1
76 80448442 Rev.A
72715.07.34

(Dwg. 22179618L12)
PARTS LIST

1 22100549 TUBE, DRYER DISCHARGE 1
80448442 Rev.A 77
72715.07.34

Assemble Tube Clamp
(Dwg. 22179618L13)
PARTS LIST

1 22070304 CLAMP, STEEL RETAINING 1
2 96705058 SCREW, HEX HEAD FLANGEM6 x 12.0 LONG 2
3 96737564 NUT, HEX FLANGE LOCKSERRATED M6-1.00 2
78 80448442 Rev.A
72715.07.34

Assemble 8mm Tubing
(Dwg. 22179618L14)
PARTS LIST

1 22101414 TUBING 8 mm (CLEAR VINYL - PVC) 1
80448442 Rev.A 79
72715.07.34

Assemble .25 Inch Tubing
(Dwg. 22179618L15)
PARTS LIST

1 39124813 TUBING, 0.25 “ SYNFLEX 1
80 80448442 Rev.A
72715.07.34
dryer PIPING (W/O BYPASS) assembly drawing and parts list

Assemble Air Filter And Piping
5
4 2
6 8
7
1
(Dwg. 24584484B8)
PARTS LIST

1 22132971 CONNECTOR, 8MM TUBE 1
24233686 FILTER, (FA 230 IG) (F-CAST SERIES) (ELEMENT 24242141) 1
2
85570588 FILTER, (DH IG) (ELIMINATOR SERIES) (ELEMENT 85565703) 625mm
3 39124813 TUBING 2
4 85561017 HOSE, HYDRAULIC 1
5 95937520 CONNECTOR, 1.00 TUBE X 1.00 NPT 1
6 95937538 CONNECTOR, 1.00 TUBE X .75 NPT 1
7 95937652 ELBOW 1
8 97271886 COUPLING 1
80448442 Rev.A 81
72715.07.34
plenum/fan assembly drawing and parts list

Assemble Blower Shroud Assembly
(Dwg. 22173975E2)
PARTS LIST

1 SEE TABLE ASSEMBLY, BLOWER SHROUD 1
Table For Shroud

Description Shroud
11-15 kW / 50 Hz, 15-30 hp / 60 Hz 22113195
18.5-22 kW / 50 Hz 22099857
82 80448442 Rev.A
72715.07.34

Assemble Shroud Covers
(Dwg. 22173975E3)
PARTS LIST

1 22099840 ASSEMBLY, FAN COVERSHROUD 1
2 54754296 COVER, ACCESS BLOWER 1
80448442 Rev.A 83
72715.07.34

Assemble Exhaust Chute Assembly
(Dwg. 22173975E4)
PARTS LIST

1 22099873 ASSEMBLY, CHUTE 1
84 80448442 Rev.A
72715.07.34

Assemble Baffle Assembly
(Dwg. 22173975E5)
PARTS LIST

1 22099881 ASSEMBLY, BAFFLE 1
3 96742689 BOLT, HEX FLANGEM6-1.00 X 16.0 LONG 2
80448442 Rev.A 85
72715.07.34

Assemble Blower
(Dwg. 22173975E6)
PARTS LIST

1 SEE TABLE BLOWER 1
NOTE
APPLY LOCTITE 242 (ALTERNATE LOCTITE 680) TO BLOWER SETSCREW, TORQUE TO 21 Nm..
Table For Blower

Description Blower
18.5-22 kW / 50 Hz 99295362
25-30 hp / 60 Hz 99319329
11-15 kW / 50 Hz, 15-20 hp / 60 Hz 99295354
86 80448442 Rev.A
72715.07.34

Assemble Cooler Plenum
(Dwg. 22173975E7)
PARTS LIST

1 SEE TABLE ASSEMBLY, PLENUM WALL 1
3 96742689 BOLT, HEX FLANGEM6-1.00 X 16.0 LONG 3
Table For Plenum

Description Plenum
18.5-22 kW / 50 Hz 22099865
25-30 hp / 60 Hz 22113203
11-15 kW / 50 Hz, 15-20 hp / 60 Hz 22159099
80448442 Rev.A 87
72715.07.34

Assemble Blower Cone
(Dwg. 22173975E8)
PARTS LIST

2 SEE TABLE CONE, INLET 1
Table For Cone

Description Cone
18.5-22 kW / 50 Hz 25-30 hp / 60 Hz 99295388
11-15 kW / 50 Hz 15-20 hp / 60 Hz 99295370
88 80448442 Rev.A
72715.07.34
starter assembly drawing and parts list

Assemble Starter
(Dwg. 48775118 B2)
PARTS LIST

24694697 ASSEMBLY, STARTER AF65/AF52 (FS-SD) 1
1
24748642 ASSEMBLY, STARTER AF26 (FS-SD) 1
2 96704416 NUT, HEX FLANGE LOCK 4
80448442 Rev.A 89
72715.07.34
starter box assembly drawing and parts list

Assemble Starter Box to Base
(Dwg. 48775126A2)
PARTS LIST

1 22160030 WASHER, NEOPRENE 4
24746588 60 HERTZ - STARTER BOX 1
2
24746786 50 HERTZ - STARTER BOX 1
3 39917489 SCREW, HEX HEAD 4
90 80448442 Rev.A
72715.07.34

Assemble Cable Glands and Solenoid Brackets
3 1
(Dwg. 48775126A3)
PARTS LIST

1 23547763 GLAND, WIRE WITH LOCKING NUT 2
2 54755426 BRACKET, SOLENOID 1
3 92877018 GLAND, CABLE 4
4 96737564 NUT, HEX FLANGE LOCK 2
80448442 Rev.A 91
72715.07.34

Assemble Screw into Starter Box For Baffle
(Dwg. 48775126A4)
PARTS LIST

1 96742689 BOLT, HEX FLANGE 1
92 80448442 Rev.A
72715.07.34

Assemble Door to Starter Box
(Dwg. 48775126A5)
PARTS LIST

1 22091193 HINGE, LIFT-OFF 2
2 48776165 DOOR, STARTER BOX 1
3 96743992 MACHINE SCREW, 4
80448442 Rev.A 93
72715.07.34

Assemble Xe Controller and Gaskets to Door
(Dwg. 48775126A6)
PARTS LIST

1 22177315 GASKET 1
2 24114068 CONTROLLER 1
3 92340447 WASHER, LOCK 4
4 96705165 WASHER, PRODUCT 4
5 96742358 SCREW, 4
94 80448442 Rev.A
72715.07.34

Assemble Latches to Door
(Dwg. 48775126A7)
PARTS LIST

1 23180557 LATCH, DOOR 2
80448442 Rev.A 95
72715.07.34

Assemble Ground Wire
SEE DETAIL A
DETAIL A
(Dwg. 48775126A8)
PARTS LIST

1 24847865 TERMINAL 2
3 96748900 SCREW, HEX HEAD 1
* 32115545 WIRE, GREEN NO. 12AWG AR
* - NOT ILLUSTRATED
AR - AS REQUIRED
96 80448442 Rev.A
72715.07.34

Assemble Pressure Transducer to Bracket
3
1
2
(Dwg. 48775126A9)
PARTS LIST

1 22359632 TRANSDUCER 2
2 39461868 BULKHEAD 2
3 39875570 CABLE, TRANSDUCER 2
80448442 Rev.A 97
72715.07.34

Assemble Solenoid Valve to Bracket
(Dwg. 48775126A10)
PARTS LIST

1 22055909 TEE, MALE 1
2 22124085 VALVE, SOLENOID 1
3 39155650 ELBOW 1
4 96703756 NUT, HEX STYLE 1 2
5 96742754 SCREW 2
98 80448442 Rev.A
72715.07.34

Assemble Solenoid Valve to Bracket
(Dwg. 48775126A11)
PARTS LIST

1 39155577 ELBOW 2
2 54774302 VALVE, SOLENOID 1
3 96743182 SCREW, HEX SOCKET 4
80448442 Rev.A 99
72715.07.34

Assemble Thermister
(Dwg. 48775126A12)
PARTS LIST

1 22137848 SENSOR, TEMPERATURE 1
2 39404157 O-RING 1
100 80448442 Rev.A

72715.07.34

Assemble Elbow to Separator Cover
(Dwg. 48775126A13)
PARTS LIST

1 39155577 ELBOW 1
80448442 Rev.A 101

72715.07.34

Assemble 25 inch Tubing
(Dwg. 48775126A14)
PARTS LIST

1 39124813 TUBING, .25 INCH SYNFLEX AR
AR AS REQUIRED
102 80448442 Rev.A

72715.07.34

Assemble 38 inch Tubing
(Dwg. 48775126A15)
PARTS LIST

1 39124821 TUBING, .38 INCH SYNFLEX AR
AR AS REQUIRED
80448442 Rev.A 103

72715.07.34
starterbox assembly drawing and parts list

Assemble Solenoid Cable Assemblies
(Dwg. 48775126A16)
PARTS LIST

1 22056329 ASSEMBLY, CABLE 2
104 80448442 Rev.A

72715.07.34
cooler assembly drawing and parts list

Assemble Cooler
(Dwg. 48775688A2)
PARTS LIST

22082499 COOLER, COMBINATION (AIR/OIL), 11-15 kW / 15-20 hp 1
1
54753918 COOLER, COMBINATION (AIR/OIL), 18.5 - 5-22 kW / 25-30 hp 1
3 96737564 NUT, HEX FLANGE LOCK SERRATED M6-1.00 4
80448442 Rev.A 105

72715.07.34

Assemble Cooler Fittings
(Dwg. 48775688A3)
PARTS LIST

1 95928230 PLUG, SOCKET 1
2 96952379 ELBOW 1
3 96960786 ELBOW, 90 2
106 80448442 Rev.A

72715.07.34

Assemble Air Discharge Hose
(Dwg. 48775688A4)
PARTS LIST

1 85561231 HOSE, HYDRAULIC 1
3 95457586 CLAMP, HOSE SUPPORT 1
80448442 Rev.A 107

72715.07.34

Assemble Oil Hose From The Cooler To The Separator
(Dwg. 48775688A5)
PARTS LIST

1 24691610 HOSE, PTFE HYDRAULIC STR X 90 2
2 95301883 CLAMP, HOSE SUPPORT 2
108 80448442 Rev.A

72715.07.34

Assemble Cooler Plug For Non-Dryer Units Only
(Dwg. 48775688A6)
PARTS LIST

80448442 Rev.A 109

72715.07.34

Assemble Plug For Dryer Units Only
(Dwg. 48775688A7)
PARTS LIST

110 80448442 Rev.A

72715.07.34
cooler discharge connection option assembly drawing and parts list

Assemble BSPT Cooler Connection (This Is To Be Used On Non-Dryer Units And Non-Tank Mounted Units)
(Dwg. 22174130A2)
PARTS LIST

1 39183314 ADAPTER, 1.00 NPT MALE TO 1.00 JIS/ BSPT FEMALE 1
80448442 Rev.A 111

72715.07.34
PANEL FILTER ASSEMBLY DRAWING AND PARTS LIST

Assemble Panel Filter
(Dwg. 22171029A2)
PARTS LIST

1 22053722 PAD, PRE-FILTER 1
112 80448442 Rev.A

72715.07.34
PANEL FILTER ASSEMBLY DRAWING AND PARTS LIST

Assemble Panel Filter Bracket
(Dwg. 22171029A3)
PARTS LIST

1 22089650 ANGLE, PRE-FILTER 1
80448442 Rev.A 113

72715.07.34
standard air filter assembly drawing and parts list

Assemble Rubber Elbow
(Dwg. 22173942C2)
PARTS LIST

1 89295935 HOSE, AIR FILTERUNLOADER (90DEG BEND) 1
2 95340683 CLAMP, HOSE WORM DRIVESTAINLESS STEEL 1
114 80448442 Rev.A

72715.07.34
standard air filter assembly drawing and parts list

Assemble Air Filter
(Dwg. 22173942C3)
PARTS LIST

1 89265300 AIR FILTERMANN PICOLINO 1
2 95340683 CLAMP, HOSE WORM DRIVE STAINLESS STEEL 1
80448442 Rev.A 115

72715.07.34
HIGH DUST AIR FILTER ASSEMBLY DRAWING AND PARTS LIST

Assemble Air Filter And Bracket
(Dwg. 22173959E2)
PARTS LIST

1 22245534 BRACKET, HIGH DUSTAIR FILTER SUPPORT 1
2 36897999 IR CLEANER ASSEMBLY 1
3 92368687 SCREW, TPG M6 X 1.0 X 14 LG 2
4 96712153 SCREW, HEX HEAD FLANGEM8 X 25.0 LONG 2
116 80448442 Rev.A

72715.07.34

Assemble Rubber Elbows
(Dwg. 22173959E3)
PARTS LIST

1 22153647 COUPLING, INLET HOSE(75mm LONG) 1
2 89295935 HOSE, AIR FILTERUNLOADER (90DEG BEND) 2
80448442 Rev.A 117

72715.07.34

Assemble Coupling For Inlet Hose
(Dwg. 22173959E4)
PARTS LIST

1 22153647 COUPLING, INLET HOSE(75mm LONG) 1
118 80448442 Rev.A

72715.07.34

Assemble Air Inlet Hose
(Dwg. 22173959E5)
PARTS LIST

1 22155345 HOSE, AIR INLET(515mm LONG) 1
2 23411135 CLAMP, BRIDGE(3 INCH) 2
NOTES:
1. ENSURE BRIDGE ON CLAMP IS ALIGNED WITH WIRE IN HOSE.
80448442 Rev.A 119

72715.07.34
PORO OPTION ASSEMBLY DRAWING AND PARTS LIST

Cut Hole In Starter Box And Assemble Hub
(Dwg. 48784037A2)
PARTS LIST

1 35275494 HUB, 1
120 80448442 Rev.A

72715.07.34

Assemble Horn
(Dwg. 48784037A3)
PARTS LIST

1 39100136 MOD ALRM HORN W/WEATHER RESISTANT BACK BOX 1
2 39108949 LOCKNUT 2
3 95934279 NIPPLE, EXTRA STRONG 1
80448442 Rev.A 121

72715.07.34

Assemble Plug
(Dwg. 48784037A4)
PARTS LIST

1 39146733 1/2” HOLE PLUG 1
122 80448442 Rev.A

72715.07.34
60 hz decal assembly drawing and parts list

Assembly, Internal Decals A
(Dwg. 48775134A2)
PARTS LIST

1 22248538 DECAL, PINCH HAZARD 4-LANGUAGE 2
2 30286686 DECAL, ROTATION ARROW NOTICE ROTATION 1
3 32343527 DECAL, WARNING HIGH PRESSURE 1
4 32343568 DECAL, WARNING HAZARDOUS VOLTAGE 1
5 32343584 DECAL, WARNING HOT SURFACE 1
6 32343907 DECAL, LOCK AND TAG OUT 1
7 93166502 DECAL, REPLACEMENT FILTER ELEMENT 1
80448442 Rev.A 123

72715.07.34

Assembly, Internal Decals B
(Dwg. 48775134A3)
PARTS LIST

1 22115703 TAG, ROTATION 60HZ 1
2 32344095 TAG, SHIPPING BRACKET 2
48776173 DECAL, MAINTENANCE SCHEDULE, 60 Hz ULTRA 1
3 24097685 DECAL, MAINTENANCE SCHEDULE, 60 Hz ULTRA FG 1
24098386 DECAL, MAINTENANCE SCHEDULE, 60 Hz ULTRA EL 1
4 93166460 DECAL, COOLANT DRAIN 1
124 80448442 Rev.A

72715.07.34

Assembly, Internal Decals C
(Dwg. 48775134A4)
PARTS LIST

1 32343535 DECAL, WARNING MOVING BELTS 1
2 32343550 DECAL, WARNING EXPOSED FAN 1
80448442 Rev.A 125

72715.07.34

Assembly, Starter Door Internal Decals
(Dwg. 48775134B5)
PARTS LIST

1 24795221 DECAL, NOTICE, VOLTAGE WIRED UNIT 2
2 48775233 SCHEMATIC, ELECTRICAL DIAGRAM, S/D, Xe-70M(FS-SD) 1
126 80448442 Rev.A

72715.07.34

Assembly, Front And Rear Decals
(Dwg. 48775134A6)
PARTS LIST

1 23038466 DECAL, IR LOGO 18 IN 1
2 32343568 DECAL, WARNING HAZARDOUS VOLTAGE 1
3 47500205 DECAL, FACIA XE-70 1
4 81295990 DECAL, AIR SHIELD USA 1
5 93171262 DECAL, LIFT HERE 1
80448442 Rev.A 127

72715.07.34

Assembly, Back Decals
(Dwg. 48775134A7)
PARTS LIST

2 93171262 DECAL,LIFT HERE 1
128 80448442 Rev.A

72715.07.34

Assembly, Right Decals
(Dwg. 48775134A8)
PARTS LIST

1 23764772 DECAL, CAGI PERFORMANCE VERIFICATION25HP & LARGER ONLY (US MARKET ONLY) 2
32236481 DECAL, VOLTAGE 380 1
2
32177305 DECAL, VOLTAGE 575 1
3 32343519 DECAL, DANGER CONTAMINATEDAIR 1
4 32343543 DECAL, NOTICE AIR DISCHARGE 1
6 SPEC SPEC, COMPRESSOR PACKAGE DATA PLATE 1
80448442 Rev.A 129

72715.07.34

Assembly, Left Decals
(Dwg. 48775134A9)
PARTS LIST

130 80448442 Rev.A

72715.07.34

Assembly, Top Decals
(Dwg. 48775134A10)
PARTS LIST

3 32343899 DECAL, WARNING FLYING DEBRIS 1
80448442 Rev.A 131

72715.07.34

Assembly, Tank Decals
(Dwg.48775134A11)
PARTS LIST

1 32343576 DECAL, AIR RECEIVER AUTO-DRAIN 1
132 80448442 Rev.A

72715.07.34

Assembly, Poro Decals
(Dwg.48775134A12)
PARTS LIST

1 22140545 DECAL, NOTICE, PORO 1
poro decal for poro option only
80448442 Rev.A 133

72715.07.34

Assembly, External Dryer Decals
(Dwg. 48775134A13)
PARTS LIST

1 22181663 DECAL, CONDENSATE DRAIN 4 LANG 1
3 32343907 DECAL, LOCK AND TAG OUT 1
4 54459730 DECAL, VOLTAGE115/1/60 1
134 80448442 Rev.A

72715.07.34

Assembly, Internal Dryer Decals With Dryer Bypass
(Dwg. 48775134A14)
PARTS LIST

1 22152847 DECAL, DRYER, VALVE POSITION 1
80448442 Rev.A 135

72715.07.34

ASSEMBLY, INTERNAL DRYER DECALS WITHOUT DRYER BYPASS
(Dwg. 48775134A15)
PARTS LIST

1 24605446 DECAL, DRYER BYPASS(TEMP) 1
136 80448442 Rev.A

72715.07.34

Assembly, Internal Decals A
(Dwg. 48775142A2)
PARTS LIST

1 22248520 DECAL, PINCH HAZARD ISO 2
48776173 DECAL, MAINTENANCE PARTS,50 Hz ULTRA 1
2 24097685 DECAL, MAINTENANCE PARTS,50 Hz ULTRA FG 1
24098386 DECAL, MAINTENANCE PARTS,50 Hz ULTRA EL 1
3 92867530 DECAL, HOT SURFACE ISO 2
4 92930585 DECAL, PRESSURIZED VESSEL 1
5 92930668 DECAL, NO MAINTENANCE BEFORE REFERRING MANUAL 1
6 93165983 DECAL, ROTATION 1
7 93166502 DECAL, REPLACEMENT FILTER ELEMENT 1
80448442 Rev.A 137

72715.07.34

Assembly, Internal Decals B
(Dwg. 48775142A3)
PARTS LIST

1 22115661 TAG, ROTATION 50HZ 1
2 32344095 TAG, SHIPPING BRACKET 2
3 92930593 DECAL, ELECTRIC SHOCK 2
4 93166460 DECAL, COOLANT DRAIN 1
138 80448442 Rev.A

72715.07.34

Assembly, Internal Decals
(Dwg. 48775142A4)
PARTS LIST

1 93165959 DECAL, USE GUARDS WHEN RUNNING 2
80448442 Rev.A 139

72715.07.34

Assembly, Inside Starter Door Decals
(Dwg. 48775142A5)
PARTS LIST

1 48775233 SCHEMATIC, ELECTRICAL DIAGRAM, Xe-70M (FS-SD) 1
140 80448442 Rev.A

72715.07.34

Assembly, Front Decals
(Dwg. 48775142A6)
PARTS LIST

1 23038466 DECAL, IR LOGO 18 IN” 1
2 47500205 FACIA DECAL XE-70 1
80448442 Rev.A 141

72715.07.34

Assembly, Rear Decals
(Dwg. 48775142A7)
PARTS LIST

142 80448442 Rev.A

72715.07.34

Assembly, Left Decals
(Dwg. 48775142A8)
PARTS LIST

80448442 Rev.A 143

72715.07.34

Assembly, Right Decals
(Dwg. 48775142A9)
PARTS LIST

1 SEE TABLE DECAL, VOLTAGE 1
2 92867407 DECAL, DO NOT INHALE 1
3 92867498 DECAL, AIR DISCHARGE 1
5 SPEC SPEC, COMPRESSOR PACKAGEDATA PLATE 1
Table For Decal

Decal Description
32343097 400
32343105 220
32343113 550
144 80448442 Rev.A

72715.07.34

Assembly, Top Decals
(Dwg. 48775142A10)
PARTS LIST

1 93165959 DECAL, USE GUARDSWHEN RUNNING 1
80448442 Rev.A 145

72715.07.34

Assembly, Tank Option Decals
(Dwg. 48775142A11)
PARTS LIST

1 93166478 DECAL, CONDENSATE DRAIN 1
146 80448442 Rev.A

72715.07.34

Assembly, Poro Option Decal
(Dwg. 48775142A12)
PARTS LIST

1 92978964 DECAL, POWER OUTRESTART OPTION 1
PORO DECAL FOR PORO OPTION ONLY
80448442 Rev.A 147

72715.07.34

Assembly, Dryer Option External Decals
(Dwg. 48775142A13)
PARTS LIST

1 92930593 DECAL, ELECTRIC SHOCK 1
2 92950112 DECAL, VOLTAGE230/1/50 1
3 93165959 DECAL, USE GUARDSWHEN RUNNING 1
4 93166478 DECAL, CONDENSATE DRAIN 1
148 80448442 Rev.A

72715.07.34

Assembly, Internal Dryer Decals With Dryer Bypass
(Dwg. 48775142A14)
PARTS LIST

1 22152847 DECAL, DRYER,VALVE POSITION 1
80448442 Rev.A 149

72715.07.34

Assembly, Dryer Option Internal Decals Without Dryer Bypass
(Dwg. 48775142A15)
PARTS LIST

1 24605446 DECAL, DRYER BYPASS(TEMP) 1
150 80448442 Rev.A

72715.07.34
RECOMMENDED PARTS LIST

MAINTENANCE KIT (NO COOLANT)
CCN DESCRIPTION
24178402 KIT – MAINTENANCE 2000 HR
OPTION KITS
CCN DESCRIPTION
48775910 KIT – MODULATION (200 PSIG / 14 BARG)
48775928 KIT – MODULATION (115-145 PSIG / 7-10 BARG)
48775241 KIT – PORO
38036695 KIT – HIGH DUST AIR FILTER
88328943 KIT – OUTDOOR MODIFICATION
48775506 KIT – LOW AMBIENT (60 Hz) NON-TANK MOUNTED
48775571 KIT – LOW AMBIENT (60 Hz) TANK MOUNTED
48775613 KIT – LOW AMBIENT (50 Hz) NON-TANK MOUNTED
48775548 KIT – LOW AMBIENT (50 Hz) TANK MOUNTED
REPAIR KITS
CCN DESCRIPTION
22067177 KIT – INLET VALVE REPAIR
22293971 KIT – INLET VALVE FLAPPER REPAIR
22064695 KIT – MINIMUM PRESSURE CHECK VALVE REPAIR
22832885 KIT – THERMAL VALVE REPAIR
22861116 KIT – SHAFT SEAL
SPARE PARTS
CCN DESCRIPTION
89295976 ELEMENT, AIR FILTER
54672654 FILTER, COOLANT
54749247 CARTRIDGE, SEPARATOR
22053722 PRE FILTER
23990716 BUTTON, EMERGENCY STOP
22097208 INDICATOR, AIR RESTRICTION
85036812 FUSE, 2A/600V
22510481 FUSE, 1A/600V
54689856 CIRCUIT BREAKER 2A
54740386 GASKET, BARE SPACER
54740378 GASKET, MANIFOLD
39570999 GASKET, DISCHARGE ADAPTOR
39494794 GASKET, INLET VALVE
24691610 HOSE ASSEMBLY (PTFE/SS)
85561231 HOSE ASSEMBLY (RUBBER)
54774302 VALVE, SOLENOID (LOAD)
54654652 VALVE, SOLENOID (BLOWDOWN)
54749114 SPRING, GAS
80448442 Rev.A 151

72715.07.34
RECOMMENDED PARTS LIST
SAFETY VALVES
RECEIVER TANK
CCN DESCRIPTION
39588074 VALVE, SAFETY – 200 PSI (120 GALLON TANK) – 60 Hz
22052450 VALVE, SAFETY – 225 PSI (240 GALLON TANK) – 60 Hz
92957604 VALVE, SAFETY – 15 BAR (500 LITER TANK) – 50 Hz
54426580 VALVE, SAFETY – 10.5 BAR (750 LITER TANK) – 50 Hz
SEPARATOR MANIFOLD/TANK
CCN DESCRIPTION
22052450 VALVE, SAFETY – 225 PSI (SEPARATOR MANIFOLD) – 60 Hz
22057954 VALVE, SAFETY – 15 BAR (SEPARATOR MANIFOLD) – 50 Hz
DRIVE BELTS
60 Hz
CCN DESCRIPTION
22108427 BELT, DRIVE – 15 hp 150 PSI
22108393 BELT, DRIVE – 20 hp 125 PSI / 15 hp 125 PSI
89265060 BELT, DRIVE – 20 hp 175 PSI / 25 hp 145PSI / 30 hp 125 PSI / 30 hp 125,145, 200 PSI
89265078 BELT, DRIVE – 20 hp 145 PSI / 25 hp 200 PSI
89265052 BELT, DRIVE – 25 hp 125 PSI
50 Hz
CCN DESCRIPTION
22108393 BELT, DRIVE – 11 kW 7.5, 8.5 bar / 18.5 kW 14 bar
22108401 BELT, DRIVE – 11 kW 10 bar
89265060 BELT, DRIVE – 15 kW 7.5, 8.5 bar / 18.5 kW 7.5, 8.5 bar / 22 kW 10, 14 bar
89265052 BELT, DRIVE – 18.5 kW 10 bar / 22 kW 7.5, 8.5 bar
COOLANT CHECK
CCN DESCRIPTION
88176367 KIT – COOLANT SAMPLE CHECK
COOLANT
SIZE ULTRA ULTRA EL ULTRA FG (FOOD GRADE)
1 Liter 92837095 24161119 -
5 Liter 92692284 24061608 23973969
15 Liter - 24061624 -
20 Liter 38459582 - 23973977
152 80448442 Rev.A

72715.07.34
72715.07.34
72715.07.34
72715.07.34
ingersollrandproducts.com
© 2015 Ingersoll-Rand

Compresor UP5-22 Part List

Uploaded by

Copyright:

Available Formats

Compresor UP5-22 Part List

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Compresor UP5-22 Part List

Uploaded by

Copyright:

Available Formats

72715.07.

Contact-Cooled Rotary Screw Air Compressor

Save These Instructions

TABLE OF CONTENTS�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� 2 dryer sheet metal assembly drawing

SEPARATION SYSTEM parts list�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� � 36 standard air filter assembly drawing

DRIVE AND SEPARATION SYSTEM ASSEMBLY

SHEAVE AND BELT ASSEMBLY DRAWING�� �� �� �� �� �� �� �� �� �� �� �� � 44

outdoor modification sheet metal assembly

PARTS Ordering INFORMATION

When the life of the product has expired, it is recommended that it

BASE ASSEMBLY drawing and parts list

Item Part No. Description Qty.

BASE (STD NON-TANK MOUNTED) ASSEMBLY drawing and parts list

Item Part No. Description Qty.

BASE (DRYER NON-TANK MOUNTED) ASSEMBLY drawing and parts list

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Table for Air discharge tube

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Table for Pressure Safety Valve and Receiver Tank Assembly

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Table for Pressure Safety Valve and Receiver Tank Assembly

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Table For Tube

Item Part No. Description Qty.

Table For Pressure Safety Valve And Receiver Tank Assembly

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Item Part No. Description Qty.

Table For Tube To Receiver Tank

AIREND ASSEMBLY drawing and parts list

Item Part No. Description Qty.

AIREND ASSEMBLY parts list

Item Part No. Description Qty.

SEPARATION SYSTEM drawing and parts list

Item Part No. Description Qty.

SEPARATION SYSTEM parts list

Item Part No. Description Qty.

DRIVE AND SEPARATION SYSTEM ASSEMBLY drawing and parts list

Item Part No. Description Qty.

DRIVE AND SEPARATION SYSTEM ASSEMBLY drawing and parts list

Item Part No. Description Qty.

TABLE OF CONTENTS�� 2 dryer sheet metal assembly drawing

SEPARATION SYSTEM parts list�� 36 standard air filter assembly drawing

SHEAVE AND BELT ASSEMBLY DRAWING�� 44