ZT 111

User Manual
All rights reserved.

Specifications are subject to change without notice.
Downloaded from www.Manualslib.com manuals search engine
LIMITED WARRANTY
AND LIMITATION OF LIABILITY
Customers enjoy one-year warranty

from the date of purchase.
This warranty does not cover fuses,

disposable batteries, damage from
misuse accident, neglect, alteration,
contamination, or abnormal conditions
of operation or handling, including
failures caused by use outside of the
product's specifications, or normal wear
and tear of mechanical components.

Table of Contents Page
Introduction..........................................................1
Safety Information................................................1
Instrument Overview............................................3
LCD Display...................................................3
Function Buttons............................................5
Rotary Switch.................................................7
Input Terminals..............................................9
Measurements Instruction..................................10
Measure AC/DC Voltage..............................10
Measure AC/DC Current..............................10
Measure Resistance.....................................11
Test for Continuity........................................12
Test Diodes..................................................12
Measure Capacitance..................................13
Measure Frequency.....................................14
Measure Duty Cycle.....................................15
Measure Temperature...................................15
Test NCV………………………………………16

Maintenance.......................................................17
Clean the Product.........................................17
Replace the Batteries...................................17
Replace the Fuses.......................................18
Specifications.....................................................19
General Specifications.................................19
Mechanical Specifications............................19
Environmental Specifications.......................19
Electrical Specifications......................................20

Introduction
This product is the world's first 9999 counts palm-
size auto-ranging digital multimeter. The product
is battery-powered with true-rms, a LCD display
and a backlight.
Safety Information
To avoid possible electrical shock, fire, or
personal injury, please read all safety information
before you use the product. Please use the
product only as specified, or the protection
supplied by the product can be compromised.
• Examine the case before you use the product.
Look for cracks or missing plastic. Carefully look
at the insulation around the terminals.
• The measurement must be made with correct
input terminals and functions and within the
allowable measuring range.
• Do not use the product around explosive gas,
vapor, or in damp or wet environments.
1
• Keep fingers behind the finger guards on the
probes.
• When the product has already been connected
to the line being measured, do NOT touch the
input terminal that is not in service.
• Disconnect the test leads from the circuit before
changing the mode.
• When the voltage to be measured exceeds 36V
DC or 25V AC, the operator shall be careful
enough to avoid electric shock.
• Misuse of mode or range can lead to hazards,
be cautious. “ ” will be shown on the display
when the input is out of range.
• Low level of a battery will result in incorrect
readings. Change the batteries when battery
level is low. Do not make measurements when
the battery door is not properly placed.
2
Instrument Overview
LCD Display
② ③ ④ ⑤ ⑥ ⑦
① ⑧
⑱
⑰
⑯
⑮ ⑨
⑭
⑬ ⑫ ⑪ ⑩
① Continuity test.
Temperature test.
②
(Fahrenheit or Celsius)
③ Diode test.
④ Duty cycle test.
⑤ Display freezes present reading.
⑥ Resistance test. (Ohm)
3
⑦ Frequency test. (Hertz)
⑧ Capacitance test. (Farad)
⑨ Voltage test. (Volt)
⑩ Current test. (Ampere)
Manual range. The user selects
⑪
the range.
Auto range. The product selects
⑫
the range with the best resolution.
The product measures both
⑬ sinusoidal and nonsinusoidal ac
waveforms accurately.
⑭ Low battery. Replace batteries.
⑮ Alternating current.
⑯ Direct current.
⑰ Negative readings.
⑱ Unsafe Voltage.
Measurement units.
4
Function Buttons
① ②
Range/Backlight Button
• Push this button once to enter the manual
range mode. In manual range mode,
each push increases the range; when the
highest range is reached, the next push
will lead to the lowest range. To exit the
①
manual range mode, turn the rotary
switch.
• Push for more than 2 seconds to turn on
the backlight; long-push again to turn off
or the backlight automatically turns off
after 2 minutes.
5
SEL/HOLD Button
• Push to select alternate measurement
modes on a rotary switch setting,
including:
1. DC V/AC V/Frequency/Duty Cycle
2. DC mV/AC mV/Temperature
3. Resistance/ Continuity/ Diode/
② Capacitance
4. Frequency/Duty Cycle
5. DC A/AC A
6. DC μA/AC μA
7. NCV
• Push for more than 2 seconds to hold the
current reading on the display; long-push
again to continue normal operation.
6
Rotary Switch
Turn off the product at this position.

• The product automatically powers
off after 15 minutes of inactivity.
• The built-in beeper beeps 5 times
1 minute before auto power off.
• To restart the product from auto
power off, press the SEL/HOLD
button or turn the rotary switch
back to the OFF position and then
to a needed position.
• To disable the Auto Power Off
function, hold down the
SEL/HOLD button when turning
on the product, you will hear five
beeps if you have successfully
disabled the function.
7
DC voltage ≤999.9V
AC voltage ≤750V
Frequency with high voltage
Duty Cycle from 1%~99%
DC voltage ≤99.99mV
AC voltage ≤99.99mV
Celsius: -20~1000
Fahrenheit: -4~1832
Ohms ≤99.99MΩ
Continuity. Beeper turns on at ＜50Ω
Diode test. Displays above 3V
Farads ≤9.999mF
Frequency with low voltage
Duty Cycle from 1%~99%
DC A ≤9.999A
AC A ≤9.999A
DC A ≤999.9μA
AC A ≤999.9μA
Non-contact voltage test.
8
Input Terminals
Input terminal for AC/DC current

A mA
measurements to 9.999A.
Common (return) terminal for all
COM
measurements.
Input terminal for the measurements of:
1. AC/DC voltage
2. Resistance
3. Capacitance
4. Frequency
VΩHz
5. Temperature
6. Continuity
7. Diode
8. Duty cycle
9. AC/DC current to 999.9μA
9
Measurements Instruction
Measure AC/DC Voltage
1. Connect the black test lead to the COM
Terminal and the red lead to the VΩHz
Terminal.
2. Turn the rotary switch to or to .
3. Press SEL to toggle between AC/DC.
4. Touch the probes to the correct test points of
the circuit to measure the voltage.
5. Read the measured voltage on the display.
*Do not measure voltage that exceeds the extremes
as indicated in the Specifications.
*Do not touch high voltage circuit during
measurements.
Measure AC/DC Current

Terminal or the A mA Terminal (choose based
on the value of the current to be measured).
10
2. Turn the rotary switch to or .
3. Press SEL to toggle between AC/DC.
4. Break the circuit path to be measured, connect
the test leads across the break and apply
power.
5. Read the measured current on the display.
*Do not measure current that exceeds the extremes
as indicated in the Specifications.
*Use the A mA Terminal and the Mode when
you are measuring an unknown current. Then
switch to the VΩHz Terminal and the Mode if
necessary.
*Do not input voltage at this setting.
Measure Resistance
Terminal and the test lead to the VΩHz
Terminal.
2. Turn the rotary switch to , and the display
will show “ ”.
3. Touch the probes to the desired test points of
the circuit to measure the resistance.
4. Read the measured resistance on the display.
11
*Disconnect circuit power and discharge all
capacitors before you test resistance.
Test for Continuity

Terminal.
2. Turn the rotary switch to , press SEL once
to toggle to the Continuity Mode.
3. Touch the probes to the desired test points of
the circuit.
4. The built-in beeper will beep when the
resistance is lower than 50Ω, which indicates a
short circuit.
Test Diodes
Terminal.
12
2. Turn the rotary switch to , press SEL twice
to toggle to the Diode Mode.
3. Connect the red probe to the anode side and
the black probe to the cathode side of the
diode being tested.
4. Read the forward bias voltage value on the
display.
5. If the polarity of the test leads is reversed with
diode polarity or the diode is broken, the
display reading shows “ ”.
capacitors before you test diode.
Measure Capacitance
Terminal.
2. Turn the rotary switch to , press SEL three
times to toggle to the Capacitance Mode.
13
3. Connect the red probe to the anode side and
the black probe to the cathode side of the
capacitor being tested.
4. Read the measured capacitance value on the
display once the reading is stablized.
capacitors before you test capacitance.
Measure Frequency
Terminal.
2. Turn the rotary switch to (applies to low
frequency with high voltage), press SEL twice
to toggle to the Frequency Mode; or turn the
rotary switch to (applies to high frequency
with low voltage).
3. Touch the probes to the desired test points.
4. Read the measured frequency value on the
display.
14
Measure Duty Cycle
Terminal.
2. Turn the rotary switch to (applies to low
frequency with high voltage), press SEL three
times to toggle to the Duty Cycle Mode; or turn
the rotary switch to (applies to high
frequency with low voltage), press SEL once to
toggle to the Duty Cycle Mode.
4. Read the measured duty cycle value on the
display.
Measure Temperature
1. Connect the black thermocouple probe to the
COM Terminal and the red probe to the VΩHz
Terminal.
15
2. Turn the rotary switch to , press SEL three
times to measure temperature(℃), or press
SEL four times to measure temperature(℉).
4. Read the measured temperature on the
display.
Test NCV
1. Turn the rotary switch to .
2. Hold the product and move it around, the built-
in beeper will beep when the inner sensor
detects AC voltage nearby. The stronger the
voltage is, the quicker the beeper beeps.
16
Maintenance
Beyond replacing batteries and fuses, do not
attempt to repair or service the product unless you
are qualified to do so and have the relevant
calibration, performance test, and service
instructions.
Clean the Product

Wipe the product with a damp cloth and mild
detergent. Do not use abrasives or solvents. Dirt
or moisture in the terminals can affect readings.
*Remove the input signals before you clean the
product.
Replace the Batteries

When “ ” is shown on the display, batteries
shall be replaced as below:
1. Remove the test leads and turn off the product
before replacing the batteries.
17
2. Loosen the screw on the battery door and
remove the battery door.
3. Replace the used batteries with new batteries
of the same type.
4. Place the battery door back and fasten the
screw.
Replace the Fuses

When a fuse is blown or do not work properly, it
shall be replaced as below:
1. Remove the test leads and turn off the product
before replacing the fuse.
2. Loosen the four screws on the back cover and
the screw on the battery door, then remove the
battery door and the back cover.
3. Replace the fuse with a new fuse of the same
type.
4. Place the back cover and the battery door
back and fasten the screws.
18
Specifications
General Specifications
Display（LCD） 9999 Counts
Ranging Auto/Manual
Material ABS
Update Rate 3 Times/Second
Ture RMS √
Data Hold √
Backlight √
Low Battery Indication √
Auto Power Off √
Mechanical Specifications
Dimension 130*65*32mm
Weight 114g
Battery Type 1.5V AAA Battery * 2
Warranty One year
Environmental Specifications
Temperature 0~40℃
Operating
Humidity ＜75%
Temperature -20~60℃
Storage
Humidity ＜80%
19
Electrical Specifications
Function Range Resolution Accuracy

999.9mV 0.1mV
DC Voltage 9.999V 0.001V

(V) 99.99V 0.01V
±(0.5%+3)
999.9V 0.1V
DC Voltage 9.999mV 0.001mV

(mV) 99.99mV 0.01mV
999.9mV 0.1mV
AC Voltage 9.999V 0.001V

(V) 99.99V 0.01V
±(1.0%+3)
750.0V 0.1V
AC Voltage 9.999mV 0.001mV

(mV) 99.99mV 0.01mV
20
DC Current 999.9mA 0.1mA

±(1.0%+3)
(mA&A) 9.999A 0.001A
DC Current 99.99μA 0.01μA

±(0.8%+3)
(μA) 999.9μA 0.1μA
AC Current 999.9mA 0.1mA

±(1.2%+3)
(mA&A) 9.999A 0.001A
AC Current 99.99μA 0.01μA

±(1.0%+3)
(μA) 999.9μA 0.1μA
99.99Ω 0.01Ω ±(1.0%+3)
999.9Ω 0.1Ω
9.999kΩ 0.001kΩ
±(0.5%+3)
Resistance 99.99kΩ 0.01kΩ
999.9kΩ 0.1kΩ
9.999MΩ 0.001MΩ
±(1.5%+3)
99.99MΩ 0.01MΩ
21
9.999nF 0.001nF ±(5.0%+20)
99.99nF 0.01nF
999.9nF 0.1nF
Capacitance 9.999μF 0.001μF ±(2.0%+5)
99.99μF 0.01μF
999.9μF 0.1μF
9.999mF 0.001mF ±(5.0%+5)
99.99Hz 0.01Hz
999.9Hz 0.1Hz
9.999kHz 0.001kHz
Frequency ±(0.1%+2)
99.99kHz 0.01kHz
999.9kHz 0.1kHz
9.999MHz 0.001MHz
Duty Cycle 1%~99% 0.1% ±(0.1%+2)
22
(-20~1000)℃ 1℃
Temperature ±(2.5%+5）
(-4~1832)℉ 1℉
Diode √
Continuity √
NCV √
23

ZT 111

Uploaded by

Copyright:

Available Formats

ZT 111

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ZT 111

Uploaded by

Copyright:

Available Formats

User Manual

All rights reserved.

Customers enjoy one-year warranty

This warranty does not cover fuses,

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Turn off the product at this position.

Non-contact voltage test.

Input terminal for AC/DC current

Measure AC/DC Current

Test for Continuity

Clean the Product

Replace the Batteries

Replace the Fuses

Function Range Resolution Accuracy

DC Voltage 9.999V 0.001V

DC Voltage 9.999mV 0.001mV

AC Voltage 9.999V 0.001V

AC Voltage 9.999mV 0.001mV

DC Current 999.9mA 0.1mA

DC Current 99.99μA 0.01μA

AC Current 999.9mA 0.1mA

AC Current 99.99μA 0.01μA

You might also like