Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Coway Petit Chp06dl

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

User、

s Manual

CHP-06DL
This Water Purifier is for domestic use. It can not be used in overseas where
the power rate is different.
For the right operation of Coway Water Filtration System read this manual.

Downloaded from www.Manualslib.com manuals search engine


C
FEATURES DEAR CUSTOMERS O
W
A
Y
>> Coway Water Filtration System has differentiated function. First of all, we would like to thank you very much for purchasing this Coway water
filtration system. This product is superior to the ones in the past in function and we believe
that it will provide you with cleaner and healthier water. We would like to recommend

Features
1 Electronic, one-touch extraction of water you to read this User's Manual carefully for proper operation and maintenance and keep
this manual well together with the warranty. This user's manual could solve your problem
Select the mode (cold/hot/room water) you want,
so that you can easily fix by yourself in just a few minutes.
and touch the extraction part; you can extract a
This system (CHP-06DL) conforms to NSF/ANSI 58 for the reduction of Pentavalent
cupful of water (or extract continuously), which is
Arsenic, Barium, Cadmium, Mercury, Selenium, Radium 226/228, Trivalent chromium,
very convenient.
Hexavalent chromium, Lead, Nitrate/Nitrite as verified and substantiated by test data. This
system (CHP-06DL) conforms to NSF/ANSI 42, 53 for the reduction of Chlorine and VOC
as verified and substantiated by test data. This system is acceptable for treatment for
2 Hot water lock, hot water alarm sound
influent concentrations of no more than 27mg/L nitrate and 3mg/L nitrite in combination
To prevent accidents to inquisitive children, a hot measured as N and is certified for nitrate/ nitrite reduction only for water supplies with a
water lock is installed. Hot water cannot be pressure of 280kPa(40psig) or greater.
extracted when the lock is turned on. When trying
to extract water, alarm sound goes off.
Contents
For information How to use
3 Extract cold, hot and room water
from a single faucet Safety Information 04 Please Keep in Mind 13
‐Electricity Safety 04 Preparations 17
More convenient, having cold, hot and room
‐Installation Safety 06
water coming out of a single faucet. Operation Part/Indication Part 19
‐Operation Safety 07
‐Others 09 How to Operate 22
Names of Each Part 11 ‐To drink cold water 22
4 Automatic energy saving decreasing ‐To drink hot water 22
noise function Water Filtration Process 12 ‐To drink room water 23
‐Fixed quantity extraction 23
The system automatically controls the operation
of the cooler according to the ambient light
‐Continuous extraction 23
conditions, decreasing noise and energy use. Installation and cleaning Others
Installing Method 24 Before Asking A/S 33
5 Display window showing the product Specification
Cleaning Method 26 35
conditions at a glance
‐Inside water tank 26 Water Flow Diagram 36
A display window shows mode status (cold-water ‐Gutter 28
/hot-water modes) at a glance, enabling easy Warranty Information 37
Filter Replacement and Daily Check 29
confirmation.
Filter Replacement Method 31
02 ※ Please keep the manual near your sight and in the reach of your hand 03

Downloaded from www.Manualslib.com manuals search engine


For Information
SAFETY INFORMATION

Please read this information to prevent property loss and ensure your safety. Do not run the power cord under If the cord or plug is wet, unplug

Safety Information Electricity Safety


a heavy object to prevent it from the unit and let it completely
being damaged. dry before subsequent use.
If not observed, serious If not observed, serious If not observed, slight Electrical shock or fire may occur Electrical shock or fire may occur
injury or even death injury or property damage injury or property damage as a result. as a result.
Danger could occur. Warning Caution
could occur. could occur.

Unplug the unit before repair, Do not plug into an outlet or


inspection, or replacement. power strip that is being used
Electrical shock may occur as by several other appliances.
a result. Use a separate outlet for the unit.
Fire may occur as a result.

Electricity Safety
Do not use a damaged power Do not unplug by pulling the cord
cord or plug, and loose outlet. or handle the plug with wet hands.
Electrical shock or fire may occur Electrical shock or fire may occur
Close the main water supply valve Do not attempt to repair the
as a result. as a result.
and unplug the power cord when power cord.
not using for a long time. Electrical shock or fire may occur
Electrical shock or fire may occur as a result.
as a result.

04 05

Downloaded from www.Manualslib.com manuals search engine


For Information
SAFETY INFORMATION
Please read this information to prevent property loss and ensure your safety.
Danger Warning Caution

Electricity Safety
The length of the water inlet hose The length of the water outlet hose

Safety Information Electricity Safety Installation Safety


must be 5 m or less. must be 25cm or less.
Do not repeatedly plug and unplug Do not use if the cord appears to
the unit from the electrical outlet. be damaged. Please ask Customer If it is longer, it may degrade the If it is longer, it may degrade the
Service to replace the cord. product’s performance. product’s performance, and prevent
Electrical shock or fire may occur
complete drainage of water.
as a result. Electrical shock or fire may occur
as a result.

Remove any dust or water if it’s


Use or place the unit on a level area
on the plug.
and do not apply force to the unit. -
*Never use Benzene or gasoline
to clean the plug. Injury to the user or damage to the
unit could result.
Electrical shock or fire may occur
as a result.

Installation Safety
-
Operation Safety

Operation Safety
Do not install the unit near Keep the product away from the
heaters. inflammables gas or burnable
Fire may occur as a result. material.
Electrical shock or fire may occur Cut off the supplying valve and plug
as a result. out, then call to A/S center in the
case of any water
Leakage from the product.
Electrical shock or fire may occur as
a result.

06 07

Downloaded from www.Manualslib.com manuals search engine


For Information
SAFETY INFORMATION
Please read this information to prevent property loss and ensure your safety.
Danger Warning Caution

Operation Safety
Be careful not to get burned Periodical filter replacement is

Safety Information Operation Safety


by the hot water while prerequisite for getting clean water.
Do not place dishes or containers Immediately unplug and call the extracting or draining.
In case filters are overused, the
of water, drugs, food, or small metal Customer Service center if the unit Get burned may occur as a result. performance of filters is deteriorate.
objects on top of the product. makes a strange noise
Danger of electric shock, fire, or product or odd smell.
damage if water or alien substances get Fire may occur as a result.
into the product.
-

When moving the product or replacing


the fine post-carbon filter there may be
black residue particles under the tank
Do not put a candle, cigarette or Please use after completely closing bottom stored water may get -

Others
any other flammable object on it. the cover of the water tank in the contaminated.
Fire may occur as a result.
product. Certain level of fine dust may be introduced
Bugs or other substances might get to silver coated activated carbon that is
inside the product. used to the fine post-carbon filter to
enhance the taste of water; thus, it is
harmless to human body.

Others

Do not spray water or wipe them


When water if stored or the with benzene when cleaning .
product is not in use for a long Electrical shock or fire may
time, drain all the water in the occur as a result.
storage tank before use.
Stored water may get contaminated.

08 09

Downloaded from www.Manualslib.com manuals search engine


For Information
SAFETY INFORMATION NAMES OF EACH PART
Please read this information to prevent property loss and ensure your safety.

Others

Safety Information Others


Front
Do not carry the unit by its Do not repair, disassemble, or
power cord. modify.
Electrical shock or fire may Electrical shock or fire may occur ▶ Operation Part
occur as a result. as a result.
▶ Light detection sensor
▶ Selection Button -

▶ Cold/Hot/Room Water
Extraction faucet
/

Names of Each Part


Do not use filtered water for the Do not lift or move the product with ▶ Gutter
water exchange of an aquarium extraction faucet.
or a fishbowl. Danger of leakage or malfunctioning
Certain fish may die as a result.
Rear
▶ Top Cover

▶ Radiator
The filtration system installation shall
▶ Power Cord
comply with state and local laws and
regulations. Do not use with water
that is microbiologically unsafe or of ▶ Outlet(Blue)
unknown quality without adequate
disinfection before or after the system. ▶ Inlet(Orange)

10 11

Downloaded from www.Manualslib.com manuals search engine


How to Use
WATER FILTRATION PROCESS PLEASE KEEP IN MIND
The filter is the core technology of the filtration system. If you don’t use qualifying filter
or if you use an old filter that has expired, the system performance may degrade.
▶ The summary for the proper installation of the water filtration system.
▶ The 6-step water filtering system (CHP-06DL)

Water Filtration Process


1 Connect the power cord to the
NEO-SENSE FILTER voltage rating that matches it on
Reduces various foreign bodies that come from the feed water pipe such as dirt, sand, the rating plate only.
rust particles, VOCs and chlorine.

MEMBRANE FILTER (RO)


The RO(Reverse Osmosis) Membrane filter reduces Pentavalent Arsenic, Barium, Cadmium,
Mercury, Selenium, Radium 226/228, Trivalent chromium, Hexavalent chromium, Lead, 2 Close main water supply valve
Nitrate/Nitrite. The influent water to the system shall include the following characteristics.
to separate the faucet.
∙No organic solvents ∙Chlorine : < 2 ppm ∙pH : 7-8 ∙Temperature : 41-95 ℉(5-35 ℃)
∙Iron : < 2 ppm ∙Turbidity : < 1 NTU ∙Hardness : < 1000 mg/L Do not turn the water pipe.
/

Please Keep In Mind


POST-CARBON BLOCK FILTER
It is a composite filter. The post-carbon filter removes odor of water and improve water
taste. And the filter sensor eliminates the dust particles in the post-carbon filter.
3 Wind the teflon tape on the adaptor
CERAMIC FILTER and fit it to the pipe.
Restraints propagation of the microorganism inside water tank and enhances sanitation. Shall install the adaptor with connector on
the cold water pipe.

Disposed
Water
Outlet 4 Connect the faucet with the
adaptor.

NEO-SENSE MEMBRANE POST-CARBON CERAMIC FILTER


FILTER FILTER BLOCK FILTER

WARNING 5 Connect ¼orange tubing with


The disposed water shall be used for cleaning a toilet, a house, dishes, and as
water for sundry uses. However, please do not use it for potable water or the connector on the adaptor.
cooking water. Flush water through each filter at least 5
minutes before Connection
This system conforms to NSF/ANSI 58 for the reduction of Barium, Radium
226/228, Cadmium, Lead and TDS as verified and substantiated by test data.

12 13

Downloaded from www.Manualslib.com manuals search engine


How to Use
PLEASE KEEP IN MIND

▶ The summary for the proper installation of the water filtration system.
3 To drink room water, select the
room button.
6 Open the main water supply
Select the room water button and

Please Keep In Mind


valve to supply water to the
product. touch the extraction part, and you
can extract a cupful of water. If you
Discard first 2 tanks of water. touch the extraction part again
during extraction, water stops
flowing.

▶ The summary for the proper use of the water filtration system.
1 Select the cold button to drink cold water.
4 Select the hot button to drink hot water.
To drink cold water, the cold water function must be operating.
Press the cold button for three seconds, and the cold water mode lamp To drink hot water, the hot water function must be operating.
comes on; you can then use cold water. (See P. 20). If you don’t need the Press the hot button for three seconds, and the hot water
cold water, press the cold button again for three seconds, and the lamp mode lamp comes on; you can then use hot water. (See P. 21).
goes out, exiting cold water mode. If you don’t need the hot water, press the hot button again for three
seconds, and the lamp goes out, exiting hot water mode. (The mode
automatically returns to cold water mode three seconds after the hot
� water mode is selected).

2 To drink cold water, press the



cold button after the cold water
lamp comes on.
To drink cold water, select the cold
button and touch the extraction part,
and you can extract a cupful of water.
If you touch the extraction part again
during extraction, water stops
flowing.(See P. 22)

14 15

Downloaded from www.Manualslib.com manuals search engine


How to Use
PLEASE KEEP IN MIND PREPARATIONS

▶ The summary for the proper use of the water filtration system. ▶ Please check before use

5 To drink hot water, select the

Please Keep In Mind


hot button after the hot water Connect it to voltage rating that matches it on the rating plate.
lamp goes on.
Then, open the feed valve to supply water to the filtration system.
Select the hot button and touch the
extraction part, and you can extract
a cupful of water. If you touch the ■ When the lamp on the indication ■ Draining hot water
extraction part again during parts are turned out Pull the drainage door at the side
extraction, the water stops flowing. When the lamp on the indication parts downwards, and insert the drainage
(See P. 22) are turned out please check the reason hose; this way, you can completely drain /

Preparations
for break of electric supply in case of the hot water inside the system.
electricity failure or other conditions. ※ Note: take care not to burn yourself, since
hot water suddenly
6 Empty the gutter periodically. starts to drain as soon as the hose is inserted.
Prevent water overflowing from the
water receptacle by periodically
emptying it. (See P. 28)

7 Need for periodical filter


change and maintenance.
To drink clean water, the filter needs to be changed and cleaned ■ Hot water caution ■ After installation
periodically. Take care to avoid burns when Use after throwing away the water in
Change the filter according to the filter replacement cycle. (See P. 30) extracting hot water. the water tank up to full level more
than twice.

16 17

Downloaded from www.Manualslib.com manuals search engine


OPERATION PART

How to Use
PREPARATIONS /INDICATION PART

▶ Please check before use ▶ Operation Part/Indication Part


Preparations
1 Hot water mode lamp ▶ 2 Cold water mode lamp
■ Regular filter change ■ In case of no service for a long time / hot water 3 step LED / cold water 3 step LED
The regular filter change is very In case of no service for a long time,
important to have clean water. The filter completely drain the water from the tank.
after life is ended may degrade the Next, fill and empty water again. And use
performance. Thus, do not miss the the product.
time for the filter change. /

Operation Part/Indication Part


3 Hot water ▶
lock button
▶ Light detection
4 Hot water ▶ 8
lock on sensor
5 Hot water ▶
When not using for a long time please lock the main button ▶ Cold
7
water supply valve and plug out the power cord. water button
6 Room water ▶
button

1 Hot water mode lamp 2 Cold water mode lamp


Hot water temperature 3 step LED Cold water temperature 3 step LED
The lamp is on when hot water mode The lamp is on when a cold water
is selected. The lamps reflect the mode is selected. The lamps reflect
temperature of the water, so more the temperature of the water, so
lamps come on as the temperature more lamps come on as the
gets higher. temperature gets lower.

3 Hot water lock button 4 Hot water lock on


When the hot water lock button is The lamp goes on when the hot
pressed for three seconds, hot water water lock button is selected.
cannot be extracted, even by pressing
the hot water button, and an alarm
goes off.

18 19

Downloaded from www.Manualslib.com manuals search engine


OPERATION PART

How to Use
/INDICATION PART

▶ Operation Part/Indication Part


5 Hot water button 6 Room water button ■ When using the hot water lock

Operation Part/Indication Part


To use hot water, press the hot button, To use room water, press the
check if the hot water mode lamp goes room button and extract water. Press the hot water lock for three
on, and extract water. (However, the seconds. Check if the hot water lock
mode automatically returns to cold lamp comes on.
water mode three seconds after hot
water has been extracted.) ■ Light detection sensor setting function
Press the hot and cold buttons together for
7 Cold water button 8 Light detection sensor three seconds; the hot water mode lamp
Press the cold button, check if the Detects the ambient light, flickers as shown in the picture with a “pinging”
cold water mode lamp is on, and reducing energy usage by sound, and the system enters the setting
extract water. automatically decreasing the mode.
operation frequency of the cooler. Press the cold button once; the cold water set unset
mode lamp comes on, and the light detection
sensor function is set.
(When the cold water mode lamp goes out, the
■ When using cold water function is disabled.)
After setting the mode, press the room button
Press the cold button, and check if for three seconds; the system saves the last
the cold water mode lamp is on. set mode and converts to standby mode.

■ Fixed quantity extraction function


■ When using room water Press the hot and cold buttons together for
three seconds; the hot water mode lamp
Press the room button, and touch flickers as shown in the picture with a “pinging”
the extraction part. sound, and the system enters the setting mode.
The quantity is adjusted each time the hot
button is pressed (120cc �200cc �300cc �
120cc), and the hot water mode lamp goes on
according to each quantity phase. After 120cc 200cc 300cc

completing the mode setting,


■ To use hot water press the room button for more than three
Press the hot button, and check if the seconds; the system saves the last set mode
hot water mode lamp is on. and converts to standby mode.

※ To use both the hot water and cold water modes, press each button for more than three seconds. Once both hot water
and cold water mode lamp go on, you can use them.
※ “Light detection sensor” is set to disabled status at the initial usage

20 21

Downloaded from www.Manualslib.com manuals search engine


How to Use
HOW TO OPERATE

▶ To drink cold water ▶ To drink room water


Press the cold button after the cold Press the room button and touch the extraction

How to Operate
water mode lamp has come on, and touch the part.
extraction part.



▶ Fixed quantity extraction
Select the water mode you desire, and lightly
When the cold water does not extract from the product please check if the touch the extraction part. A predetermined
cold water mode indicator is on. quantity of water comes out.

▶ To drink hot water


Presse the hot button after the hot water mode ▶ Continuous extraction
lamp has come on, and touch the extraction part.
Select the water mode you desire, and touch and
hold the extraction part for 3 seconds or more. 3seconds
The extraction part LED flickers, signifying
continuous extraction, and discharges water for
60 seconds. Touching the extraction part again
� during extraction stops the flow of water.

The influent water should not include any organic solvents because they may damage
RO membrane polymer and may decrease the performance of RO membrane.

22 23

Downloaded from www.Manualslib.com manuals search engine


Installation and Cleaning
INSTALLING METHOD

▶ Follow the instruction for installation Be cautious


■ Installation placeⅠ ■ Installation placeⅡ

Installing Method
When installing avoid bumpy areas, Have 10Cm space between the wall
damp areas, and area in the reach of and the product and install above
cooling ▶ direct sunlight, dusty areas, water the floor where it is solid and flat.
Main water ▶ splashing areas.
stopper supply valve

■ After installation ■ Moving and installation.


After installing use after throwing When moved, connect the power
away room water more than twice. cord after 30minutes of installation.

■ Cold water pipe


No
Always connect to the cold water pipe. hot water

(When it is connected to hot water pipe the


filter of the Water Purifier may get damaged)

Connect the orange color inlet tubing � to


the tap water supplying pipe.Connecting the ■ To secure the optimum performance of the product, consult with an installation
outlet tubing �. expert for further installation. -Service center : 213-480-1600
Inlet tubing (Orange) ■ Residuals may be left inside the filter which is used during the process of inspection
Outlet tubing (Blue) when the product was manufactured.
- It is not used product so feel safe to use them.
� Do not use the main water supply valve or hose again that is used before when
� installing the product.

24 25

Downloaded from www.Manualslib.com manuals search engine


Installation and Cleaning
CLEANING METHOD

▶ Inside water tank


1 Close the water supply valve, press the cold 5 Clean the surface of the water drum with a

Cleaning Method
water button at the front of the product for 3 soft cloth.
seconds to turn off the cold water function,
and completely drain the
cold/room-temperature water �
by selecting continuous cold
water extraction mode.

2 Open the drain door, and remove the red drain 6 Rinse the water drum with
safety cap. Using the drainage hose, completely the previously stored room-
discharge all the hot water in the tank, and temperature water, plug the
store the water. When the water power in, and completely �
is completely drained, pull out drain the rinsing water using
� the cold water continuous
the power cord.
extraction function.

7 Fix the ceramic filter underneath the water drum cover, and
3 Open the top cover of the product, and open the water drum close the water drum cover.
cover inside the product.



� � �

8 Close the top cover and then connect the power cord
4 Remove the ceramic filter before opening the main water supply valve. After
from the bottom part of checking water extraction from the faucet of the
the water drum cover, � cold/room water and hot water, press the cold water
and clean by agitating in � selection switch in front of the product for re-operation.
room-temperature water. �
Please close the cover of the storage
tank completely.
Ants or other substances might get inside.

26 27

Downloaded from www.Manualslib.com manuals search engine


Installation and Cleaning
FILTER REPLACEMENT
CLEANING METHOD AND DAILY CHECK

▶ Inside water tank ▶ Filter Replacement


■ Filter

Cleaning Method
When cleaning storage tank do not use chemicals or
detergents The vitality of product is the filter. The fraudulent filters or
chemicals or detergents. missing time for filter change may degrade the
When the chemicals and detergents are not washed out performance and so interrupt the filtration.
completely it may be harmful to health.

■ Estimated Time of Filter Replacement


/
■ Please always keep environment clean and clean the storage tank If the filter is not regularly replaced, it may degrade the water quality from the product. The filter

Filter Replacement and Daily Check


once every two months. change cycle may vary within the range of expected replacement cycle depending on the feed
water quality.
※ The period for the filter exchange is made based on 10ℓ use in a day for house use (4 people
based) and 20ℓ use for business.
Part No. Names of Filter Usable Period
▶ Gutter Neo-sense Filter 6 months
Membrane Filter(RO) 24 months
1 Removing the receptacle Post-Carbon Block Filter 18 months
Hold the receptacle by the front, and pull Ceramic Filter 12 months
lightly.
∙This reverse osmosis system contains a replacement component critical to the efficiency of the
system. Replacement of the reverse osmosis component should be one with identical
specifications, as defined by the manufacturer, to assure the same efficiency and contaminant
reduction performance.
∙This reverse osmosis system contains a replacement treatment component critical for the
effective reduction of total dissolved solids, and that the product water shall be tested periodically
to verify that the system is performing properly.

2 Installing the receptacle ■ About Estimated Time of Filter Replacement


Place the water receptacle hook in front of the The filter change cycle described above is not the filter quality
product. Lightly push the hook while pressing it warranty period but the expected cycle that the filter shows its
downwards. original performance. (based on the tap water.)
※ The filter change cycle may be reduced for the areas with poor
water quality or more applications.

The product water should be tested every 6 months to ensure


that the contaminants are being reduced effectively.
Please contact your local dealer or Coway to initiate this service.

28 29

Downloaded from www.Manualslib.com manuals search engine


Installation and Cleaning
FILTER REPLACEMENT FILTER REPLACEMENT
AND DAILY CHECK METHOD

▶ Regular Check ▶ Please replace filter


For safe operation, we recommend the frequent check on the product. Keep the
1 After pulling out the power plug lock the feed water valve

Filter Replacement and Daily Check


optimum status of the product by frequent check for the following items. and drain out the water inside the Water Purifier.

■ Power
- Does the indication part repeat ON and OFF when you touch the power cord When the power
is connected?
- Is a part of power cord hotter than usual? �
- Is a part of power cord distorted, discolored or damaged?
For any event above, immediately stop the operation and
contact your nearest Coway Customer Service Center.

■ Indication Part
- Does any lamp on the indication part abnormally flicker? /

Filter Replacement Method


For the abnormal flickering of lamp, immediately Contact your
nearest Coway Customer Service Center.
2 Pull up the front drain door and using a cross screw driver
loosen the screw. Push down the lower cover and pull to the
front and separate.

30 31

Downloaded from www.Manualslib.com manuals search engine


Other Cautions for Safety
FILTER REPLACEMENT METHOD BEFORE ASKING A/S

▶ Please replace filter ▶ Check the followings before asking A/S.


The product may not properly work due to the reasons except the breakdown because
3 Replace after separating the fitting connected to the filter

Filter Replacement Method


you are not accustomed to how to operate or any negligible reasons. In those cases,
needed for replacement. check the followings, and you can solve the simple troubles without the help from the
※ Separate the fitting with using proper equipment. customer service center. If the trouble continues after you check the followings, contact
your nearest Customer Service Center.

Problem Check Items Solutions


� � Did you clean the water drum? Clean the water drum.
The water � Did you use the filter system for Remove the stored water
tastes weird too long? and clean the water drum.
� Is it about time to change the filter? Request filter change.
/
� Is it about time to change the filter? Request filter change.

Before Asking A/S


The water is
After replacing the filter check if there is no leakage and drain out � Did you lock the water supply valve? Open the water supply valve.
the room water.
flowing
slower. � Did the temperature of the water When the temperature drops, the
drop suddenly? amount of water filtered decreases.
Turn the cold water mode on by
� Is the cold water lamp on? pressing the cold water button for 3
4 Adjust the front cover to the matching part at the lower part seconds
and then close it pressing downward. � The cooling system may be malfunctioning. Request A/S.
There is no Connect the power to the voltage
� Is the power turned on?
cold water. rating that matches it on the rating
plate.
� Did If the water level is low, the cold
you close the water supply water function does not activate,
valve? to protect the electronic motor.
� Open the water supply valve.
� Is the hot water lock lamp on? Deactivate hot water.
Turn the cold water mode on by
� Is the hot water lamp on? pressing the cold water button for 3
There is no seconds
hot water Connect the power to the voltage
� Is the power connected? rating that matches it on the rating
■ When exchanging neo-sense filter : Install the filter after cleaning it for about 30seconds. plate.
■ When exchanging fine post-carbon filter : Install after cleaning the filter with water that has gone � Isroom-temperature water Request A/S.
through the neo-sense filter for about 3 minutes. overflowing or leaking?

32 33

Downloaded from www.Manualslib.com manuals search engine


Other Cautions for Safety
BEFORE ASKING A/S SPECIFICATION

Product Coway Water Purifier

Before Asking A/S


Problem Check Items Solutions
Model CHP-06DL
� Is it about time to change the filter? Request filter change.
Filtration method Reverse Osmosis
Water does � Is the water supply valve closed,
Open the water supply valve. Power Supply Voltage rating that matches it on the rating plate.
or the water supply cut?
not come
Room water 0.8gal
out, or the � cold/warm/room-temperature water
Request A/S.
fixed extraction faucet may be malfunctioning. Tank Cold water 0.6gal
/
quantity has � Is the hose bent? Straighten the hose. capacity Hot water

Specification
0.3gal
changed
� Is the water inlet hose too long? Shorten the water inlet hose Total water 1.7gal
to 5m or less.
Demension 260(W) x 440(D) x 510(H)mm <10.2(W) x 17.6(D) x 45.3(H)inch>
� Is the water being supplied properly? Check the water supply valve.
All functions Net Weight 18.7㎏(41.2 lb)
Connect the power to the voltage
suddenly � Is the power turned on? rating that matches it on the Filtration Capacity 76.8ℓ/ day (20GPD) (25℃, 20psi)
rating plate.
stop during Working Pressure 0.07-0.82MPa (20-120psi)
� Is room-temperature water
operation. Request A/S.
overflowing or leaking? Working Temperature 5-35℃(41-95℉)

There is � Iswater leaking from the water drum Open the top cover and check.
Close the water supply valve and ※ Without any prior notice, all or parts of the product are subject to change for the purpose of
leakage. cover or from inside the product? request A/S. improving the performance of the product.
※ Efficiency rating means the percentage of the influent water to the system that is available to
A/S Phone No : 213-480-1600 the user as reverse osmosis treated water under operating conditions that approximate typical
daily usage.
※ Recovery rating means the percentage of the influent water to the membrane portion of the
system that is available to the user as reverse osmosis treated water when the system is
operated without a storage tank or when the storage tank is by passed.

34 35

Downloaded from www.Manualslib.com manuals search engine


Other Cautions for Safety
WATER FLOW DIAGRAM WARRANTY INFORMATION

Water Flow Diagram


▶ CHP-06DL

Product Guarantee
1. Parts and components shall be replaced free of charge within the guarantee period if
the defects occur due to manufacturing defects in normal operation.
2. Contact us in case of breakdown.
3. In the following cases, repair work shall be charged even within the guarantee period.
▶Breakdown caused by careless operation or unreasonable repair and renovation.
/

Warranty Information
▶Breakdown caused by nonperformance of the instructions specified in the manual.
4. Even after the expiration of guarantee period, it is possible to apply for charged repair.
5. Present this Letter of Guarantee whenever repair is needed.
6. This Letter of Guarantee is valid only in domestic where you buy this product.
7. Keep this Guarantee carefully as it is not re-issued.

Model CHP-06DL Guarantee Period


Serial No. 1 year
Date of Purchase
Guarantee Period From To
Customer’s Address
Customer’s Name Tel.

Please contact our customer's service center in case you are not satisfied with our A/S service.

● Nationwide A/S Call : 213-480-1600


● Nationwide Periodical Inspection and Filter Replacement Call : 213-480-1600
● Customer Counseling Center Call : 213-480-1600 Fax :

☞ In case any other filters or parts which are not genuine


products of we are used, we is not responsible for any
problems related to water quality.

Coway Co., Ltd


658 Yoogoo-Ri, Yoogoo-Eub, Gongju-Si, Choongnam, Korea
Tel : 82-41-850-7879 Fax : 82-41-841-7816
www.coway.com

36 37

Downloaded from www.Manualslib.com manuals search engine


Other Cautions for Safety
MEMO

38 39

Downloaded from www.Manualslib.com manuals search engine

You might also like