Math
Math
Math
Introduction to conics
Vera Sacristán
Figura 1: These images show conic curves (ellipses, parabolas and hyperbolae). They
also show some cylinders and surfaces of revolution which use conics as generatrices
and directrices.
As illustrated by the images in Figure 1, these curves don’t only appear in nature,
but also in human manufactured objects and buildings. This is due to the many
convenient geometric properties conics have.
1
• A hyperbola can be defined as the locus of all points X in the plane such that
|d(X, F1 ) − d(X, F2 )| = k, where F1 , F2 (called focus of the hyperbola) are
two points in the plane, and k is any positive real number smaller than the
Euclidean distance between them 0 < k < d(F1 , F2 ).
• A parabola can be defined as the locus of all points X in the plane such that
d(X, F ) = d(X, `), where F (called focus of the parabola) is a point in the
plane, and ` is a line (called directrix of the parabola) not containing F .
Reflective properties
• Any ray sent from one of the focus of an ellipse gets reflected by the curve into
a ray towards the other focus.
• Any ray sent towards one of the focus of a hyperbola gets reflected by the
curve into a ray towards the other focus.
• Any ray sent perpendicularly to the directrix of a parabola gets reflected by
the curve into a ray towards its focus.
These properties (illustrated in Figure 3) lie underneath the use of conics in parabolic
antennas, solar heat pipes, lithotripsy machines, electric heaters,...
2
Eccentricity properties
Any conic can be defined as the locus of all points X in the plane such that d(X,F
d(X,`)
)
=
k, where F (called focus) is a point in the plane, ` (called directrix) is a line not
containing F , and k os a positive real number. This property is illustrated in
Figure 4. Depending of the value of k, different conics are obtained, namely:
Let C be a right circular cone with axis Oz, apex at the origin, and semi-aperture
angle α. Consider a plane with normal vector →
−n . The intersection C with the plane
is:
• An ellipse if →
−n forms with the axis an angle smaller than α (a circle if the
angle is 0, a point if the plane contains the apex).
• A parabola if →
−n forms with the axis an angle equal to α (a line if the plane
contains the apex).
• A hyperbola if →−n forms with the axis an angle greater than α (two intersecting
lines if the plane contains the apex).
3
Figura 5: Conics are planar sections of circular right cones.
x2 y2
• Ellipse: a2
+ b2
= 1.
x2 y2
• Hyperbola: a2
− b2
= 1.
• Parabola: y 2 = 4ax.
The geometric meaning of the parameters in the equations are illustrated in Figure 6.
4
All these equations can be reduce to one of the following:
x2 y 2
Ellipse + 2 =1 (a cos t, b sin t), t ∈ [0, 2π]
a2 b
x2 y 2
Hyperbola − 2 =1 (±a cosh t, b sinh t), t ∈ R
a2 b
x2 y 2
Empty set − − 2 =1
a2 b
x2 y 2
One point + 2 =0 (0, 0)
a2 b
x2 y 2
Two intersecting lines − 2 =0 (at, ±bt), t ∈ R
a2 b
x2
Parabola −y =0 (a2 t, t2 ), t ∈ R
a2
x2
Two parallel lines =1 (±a, t), t ∈ R
a2
x2
Empty set − 2 =1
a
x2
One (double) line =0 (0, t), t ∈ R
a2
5
How to prove all these things
Definition of conics. There are many ways of defining conics and then proving
their properties. One of the easiest consists of defining them by their focal proper-
ties. From there, the standard form of their equations is easy to obtain. Once the
equations are known, it is easy to prove that conics are plane sections of circular
right cones and have reflective and eccentricity properties. Finally, proving that all
polynomial equations of degree two describe a (possibly degenerate) conic is done
through diagonalization.
• Ellipse: Given F1 and F2 , locate the origin in their midpoint and let the Ox
axis to be the line through them. Then F1 = (c, 0) and F2 = (−c, 0). Assume
that the ellipse is the locus of all points X such that d(X, F1 ) + d(X, F) = 2a.
Prove that a ≥ c (otherwise the ellipse is the empty set) and let b2 = a2 − c2 .
2 2
Prove that the equation d(X, F1 ) + d(X, F2 ) = 2a is equivalent to xa2 + yb2 = 1.
• Hyperbola: As in the previous case, let F1 = (c, 0) and F2 = (−c, 0). Let the
hyperbola be the locus of all points X such that |d(X, F1 ) − d(X, F2 )| = 2a.
Prove that in this case c ≥ a and let b2 = c2 − a2 . Prove that the equation
2 2
|d(X, F1 ) − d(X, F) | = 2a is equivalent to xa2 − yb2 = 1.
• Parabola: Given F and `, let the Ox axis be the line through F perpendicular
to `, O be the midpoint between F and ` along Ox, and let Oy be the line
through O parallel to `. Then F = (a, 0) and ` has equation x = −a. Prove
that the equation d(X, F ) = d(X, `) = 2a is equivalent to y 2 = 4ax.
Plane sections of the cone. In order to prove that the plane sections of a circular
right cone are conics, consider the right circular cone with equation x2 + y 2 = a2 z 2 ,
where a > 0. Intersect the cone with horizontal planes z = k, with oblique planes
y = az + k (which are parallel to a generatrix), and with planes y = bz + k where
0 ≤ b 6= a, distinguishing the cases b < a and b > a. Finally, use rotational
symmetry arguments to extend your results to all remaining planar sections of the
cone.
6
• Hyperbola: Use an analogous strategy.
−−→
• Parabola: In this case the vectors to be considered are F X and the horizontal.
ax2 + 2bxy + cy 2 + dx + ey + f.
i.e.,
αx2 + βy 2 + γx + δy + f = 0,
where the cross product xy does not appear. At this point if α, β 6= 0, completing
squares by the appropriate translation X = X + W allows to transform the previous
equation into the following:
α 0 x
x y = + ε = 0,
0 β y
which is
2 2
αx + βy + ε = 0.
If β = 0, completing squares gives rise to the following equation:
α 0 x x
x y = + 0 δ +ε=0
0 0 y y
or, equivalently,
2
αx + δy + ε = 0.
The table in page 5 reports all possible combinations of positive, negative and null
values for the coefficients α, β, γ, δ, ε.