6XV18403AH10 Datasheet en
6XV18403AH10 Datasheet en
6XV18403AH10 Datasheet en
Electrical data
Damping ratio per length
● at 10 MHz / maximum 0.06 dB/m
● at 100 MHz / maximum 0.22 dB/m
Impedance
● at 1 MHz ... 100 MHz 100 Ω
Relative symmetrical tolerance
● of the characteristic impedance at 1 MHz … 15 %
100 MHz
Near-end crosstalk per length
● at 1 MHz ... 100 MHz 0.5 dB/m
Transfer impedance per length / at 10 MHz 10 mΩ/m
Loop resistance per length / maximum 120 mΩ/m
Operating voltage
● RMS value 80 V
Mechanical data
Number of electrical cores 4
Design of the shield Overlapped aluminum-clad foil, sheathed in a braided screen of
tin-plated copper wires
Type of electrical connection / FastConnect Yes
Core diameter
● of AWG22 core 0.75 mm
Outer diameter
● of inner conductor 0.75 mm
● of the wire insulation 1.5 mm
● of the inner sheath of the cable 3.9 mm
● of cable sheath 6.5 mm
Symmetrical tolerance of the outer diameter / of 0.2 mm
cable sheath
Material
● of the wire insulation polyethylene (PE)
● of the inner sheath of the cable FRNC
● of cable sheath PUR (TPE-U)
Color
● of the insulation of data wires white/yellow/blue/orange
● of cable sheath green
Bending radius
● with single bend / minimum permissible 19.5 mm
● with multiple bends / minimum permissible 49 mm
● with continuous bending 100 mm
Number of bending cycles 4000000; Drag chain suitable for 4 million bending cycles at a
bending radius of 100 mm, a speed of 4 m/s and an acceleration
of 4 m/s²
Tensile load / maximum 150 N
Weight per length 63 kg/km
Ambient conditions
Ambient temperature
● during operation -40 ... +75 °C
● during storage -50 ... +75 °C
● during transport -50 ... +75 °C
● during installation -20 ... +60 °C
● Note Electrical properties measured at 20 °C, tests according to DIN
VDE 0472
Burning behavior flame resistant according to IEC 60332-1-2
Class of burning behaviour / according to EN 13501- Eca
6