Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    T - Auto-Aligning System Manual PDF

    Uploaded by

    JoséAntonioGonzálezRamírez
    The Auto-Aligning System (AAS) on TH-A series cutting plotters uses registration marks printed around graphics to detect their position and enable automatic contour cutting. The 7-step process includes: 1) preparing graphics with minimum 25mm margins and 20mm registration marks, 2) creating contours, 3) adding marks, 4) printing at 100% scale, 5) loading the printout and adjusting its position, 6) sending the contour path, and 7) checking if the cutting tool aligns correctly with the registration marks. Media calibration can fine-tune the offset values to align the actual and printed lines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    T - Auto-Aligning System Manual PDF

    Uploaded by

    JoséAntonioGonzálezRamírez
    94 views10 pages
    The Auto-Aligning System (AAS) on TH-A series cutting plotters uses registration marks printed around graphics to detect their position and enable automatic contour cutting. The 7-step process includes: 1) preparing graphics with minimum 25mm margins and 20mm registration marks, 2) creating contours, 3) adding marks, 4) printing at 100% scale, 5) loading the printout and adjusting its position, 6) sending the contour path, and 7) checking if the cutting tool aligns correctly with the registration marks. Media calibration can fine-tune the offset values to align the actual and printed lines.

    Original Title

    T_Auto-Aligning System manual.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Auto-Aligning System (AAS) on TH-A series cutting plotters uses registration marks printed around graphics to detect their position and enable automatic contour cutting. The 7-step process includes: 1) preparing graphics with minimum 25mm margins and 20mm registration marks, 2) creating contours, 3) adding marks, 4) printing at 100% scale, 5) loading the printout and adjusting its position, 6) sending the contour path, and 7) checking if the cutting tool aligns correctly with the registration marks. Media calibration can fine-tune the offset values to align the actual and printed lines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    94 views10 pages

    T - Auto-Aligning System Manual PDF

    Uploaded by

    JoséAntonioGonzálezRamírez
    The Auto-Aligning System (AAS) on TH-A series cutting plotters uses registration marks printed around graphics to detect their position and enable automatic contour cutting. The 7-step process includes: 1) preparing graphics with minimum 25mm margins and 20mm registration marks, 2) creating contours, 3) adding marks, 4) printing at 100% scale, 5) loading the printout and adjusting its position, 6) sending the contour path, and 7) checking if the cutting tool aligns correctly with the registration marks. Media calibration can fine-tune the offset values to align the actual and printed lines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Auto-Aligning System (AAS)

    Introduction
    The TH-A series cutting plotters feature a Auto -Aligning
    System to guarantee auto contour cutting by detecting the
    registration marks printed around the graphic.

    Steps of Flexi
    1. Prepare the graphic
    The marks length is 20mm . For finding the marks, Margin
    must have 25mm at the four sides of the graphic at least.

    2. Create a contour for the graphic


    click the menu as following picture
    Show the parameter dialog box as following

    choose appropriate offset value (usually


    0.1mm) and click the button ，contour creation finished.
    3. Add the registration marks
    click the menu as the following picture

    Show the parameter dialog box as following

    choose the registration marks as the above picture show and


    click ，marks adding is finished.

    4. Print the Graphics


    Print the graphic and the marks with your printer .
    Scaling must be 100% .
    5. Load the printout onto cutter, be care of the original point.
    Please make sure the media is fed with correct direction.
    Move the 4 direction keys to adjust the position, put the scan
    point to the center of the original L shape , as following

    Scan point

    6. Choose the menu to putout contour, if the first time to


    use the software , need to add the machine first,choose the
    machine Model with “AMU-”, as following

    ，click“next”,
    ,click“finish”, display the dialog box

    ，click“send”, display the dialog box，

    ，machine start finding the marks. Click“OK” If it is successful


    or click “cancel” If it fails.
    7. How to determine whether successful, if successful, pen
    or blade go to the center of the scan head, the laser is
    off at the same time. If not successful, the laser is on,
    the machine stop.
    8. The solution if it fails is Press button“PAUSE”can cancel
    the work, or press the 4 direction keys to let the scan point go
    to the right position, and press button“enter”for repeat
    scanning, the following pictures are the positions when

    repeating finding ， ， ， 。

    Media Calibration
    Before performing AAS contour cutting, it’s re commended to
    print out a test file that as following rectangle by 100mm
    *100mm.

    ，
    Choose the offset value is 0.0 when making contour , same as
    the picture .

    If there is any adjustments had to be made, you can change the


    offset value by following the steps
    1. Measure the offset values from the printed line and the
    actual cutting line

    2. Press menu button to the display

    3. Press the 4 direction keys to set right value and press enter ,
    Horizontal line is defined as X and vertical is defined as Y
    4. When the actual cutting line and the printed line need to be
    changed towards the direction of origin mark, then simply add
    the negative value of the offset. If the direction is from the
    opposite of t he origin mark, then enter positive values for the
    offset. This method apply on both X and Y axle.

    For example
    if the display is DX=-0.3，DY=0.5 As following picture：

    The red line is the position of the real cutting , the offset value
    of the red line and the printed line is X=0.4，Y=0.4，the new
    canculated value is DX=-0.3+(-0.4)=-0.7，DY=0.5+(-0.4)=0.1
    For another example

    Black line is the original image, the red and the blue line is
    the actual figure drawing. the origin is alignment, but
    up-left is not, Parameters of BX and BY the value of the
    need to adjust.
    At the display

    Press , disply
    If case like the red line is big ,please minus BX and BY the
    corresponding values.
    If case like the blue one is small,please add BX and BY the

    corresponding values.

    Again press redisplay

    If you have any questions, please contact us or email to


    admin@teneth-cnc.com.

    You might also like