Ramos H. Bumanglag A. Santos J

FOOTING FORMULA: VOLUME = L * W * T
CLASS A CONCRETE MIX

LENGTH L (M) 0.60 M
WIDTH W (M) 0.60 M
THICKNESS T (M) 0.25 M
TOTAL CONCRETE VOLUME 0.09 CU.M.
Number of Footing Units 10.00 Units
TOTAL VOLUME OF CONCRETE: 0.90 CU.M.
# OF CEMENT BAGS 9.00 BAGS
VOL. OF SAND CU.M. 0.50 CU.M.
VOL. OF 3/4" GRAVEL CU.M. 0.90 CU.M.
WALL FOOTING
FORMULA: VOLUME = L * W * T
LENGTH LT (M) 55.00 M
WIDTH W (M) 0.20 M
THICKNESS T (M) 0.15 M
FLOOR SLAB FORMULA: VOLUME = L * W * T

Length L (M) 6.00 M
Width W (M) 9.00 M
Thickness T (M) 0.10 M
Concrete Mix Design (CLASS) AA, A,or AA 1:1.5:3
12 0.5 1
FLOOR SLAB - BY AREA

FORMULA: VOLUME = Floor Area* T
Enter Floor AreaA (SQ.M) 420.00 SQ.M
Enter Thickness T (M) 0.10 M
Enter Concrete Mix Design (CLASS) AA, A,or B 1:3:6
Area # OF CEMENT BAGS 315.00 BAGS
7.5 0.5 1 VOL. OF 3/4" GRAVEL CU.M. 42.00 CU.M.
BASED ON MAX FAJARDO - SIMPLIFIED CONSTRUCTION ESTIMATE HANDBOOK

CONCRETE COLUMNS COLUMN DIMENSIONS:
RECTANGULAR
Width 1 0.25 M
Width 2 0.25 M
FORMULA: VOLUME = H * W1 * W2
Enter Height L (M) 1.22 M
VOLUME OF CONCRETE FOR EACH COLUME: 0.08 CU.M.
Number of Columns Units 21.00 Units
CONCRETE COLUMNS COLUMN DIMENSIONS:

CIRCULAR
Diameter 0.30 M
AreaCirc 0.07 SQ.M.
FORMULA: VOLUME = H * AreaCirc

Enter Height L (M) 3.00 M
VOLUME OF CONCRETE EACH COLUMN: 0.21 CU.M.
Number of Columns Units 6.00 Units
CONCRETE BEAMS
FORMULA: VOLUME = LT * W * D
LENGTH LT (M) 5.00 M
WIDTH W (M) 0.20 M
BEAM DIMENSIONS: DEPTH D (M) 0.30 M
CONCRETE STAIRS

Riser Height RH (M) 0.18 M
Tread Run TR (M) 0.30 M
Stair Width W (M) 1.20 M
Number of Steps N 13.00 Steps
Stringer Thickness TS (M) 0.18 M
0.42 0.98 1.40

STAIR LANDING T 0.15

H 1
B 0.9
# OF CEMENT BAGS 2 BAGS
TOTAL VOLUME OF CONCRETE:

ITEM - III STEEL REINFORCEMENT
LENGTH OF REINFORCING BARS FOR CHB IN METERS
(M) LENGTH
(M) LENGTH
OF
OF SPACEING
VERT. SPACING (CM) HORIZONTA
VERTICAL LAYER
L REIN./
REIN./SQ.M.
SQ.M.
40 2.93 2 Layers 3.300
60 2.13 3 Layers 2.150
80 1.6 4 Layers 1.720
DETERMINING THE NUMBER OF BARS USED
Wall Height H (M) 3.00

Wall Length L (M) 63.00
Wall openings SQ.M 1.68
Constant Factor VERTICAL 2.13
Constant Factor HORIZONTAL 2.15
TOTAL WALL AREA: 187.32
# OF VERTICAL BARS USED: 67.00
# OF HORIZONTAL BARS USED: 68.00
#16 TIE WIRE USED: 8.90
FOOTING MATTING
Footing Length L (m) 1.20
Footing Width W (M) 1.20
# of Bars along L # 6.00
Number of Bars along W # 6.00
Number of Footing # 9.00
Clear Cover Cc (M) 0.075
Standard Clear Cover for footing =0.05m to 0.075m
Net. Length along L 1.05

Net. Length along W 1.05
# OF REIN. BARS USED: 21.78
WALL FOOTING REINFORCEMENT
Wall Footing Width W (M) 0.20
Wall Footing Total Length LT (M) 55.00
Spacing of Tie Bars for Wall footing (M) 0.40
Total # of Ties: 139.00

Total # of Horizontal Bars Used: 30.00
Overall Total # of Bars used: 35.00
RECTANGULAR COLUMN REINFORCEMENT 350X350 1ST FLOOR
Column Height H (M) 3.50

Number of Columns # 21.00
Reinforcement Bar Diameter required Ø 12.00
Column Dimension D1 (M) 0.25
Number of Vertical Bars (M) 4.00

Stirrup bar diameter required Ø 10.00
Stirrups Spacing (M) 0.13
1 0.2
Use End Hook: 0.300
Total length of each bars should be more than or equal to: 6.00
Total Number of Vertical Bars @ 6M: 84.00
6
Cut Length of each stirrups: 1.40
Number of Stirrups per Column: 39.00
Total Number of Bars used for stirrups @ 6M : 192.00
CIRCULAR COLUMN REINFORCEMENT

Column Diameter D1 (M) 0.30

1 0.2
Use End Hook: 0.200
6 Circular Stirrups
Total Number of Bars required for stirrups @ 6M : 35.00
#16 TIE WIRE required: 7.80
Spiral Stirrups
Number of Stirrup Loops per Column: 28.50
Total Number of Bars required for stirrups @ 6m : 30.00
BEAM REINFORCEMENT (BEAM TO BEAM = LESS THAN 6.0 METERS) ONE BAY
Beam to Beam Length L (M) 5.00

Beam Width W (M) 0.20
Beam Depth D (M) 0.30
Column Width Cw(M) 0.30
# of Non-
# of Bars Continuous Size of Bars
Continuous Bars
Top Bars 3 - 16.00
Web Bars - - 12.00

Note: put "0" zero if web bars not applicable
Bottom Bars 2 - 16.00
Stirrup Bars Diameter required: 10.00

Stirrup Spacing: 0.20
TOP BARS
# of 6m Length Deformed Bars required as Continuous Bars 3.00
# of 6m Length Deformed Bars required as Non-Continuous Bars -
WEB BARS
# of 6m Length Deformed Bars required as Web Bars -
BOTTOM BARS
Number of 16mm bars used as main bars 5.00

Number of 12mm bars used as web bars -
Number of 10mm bars used as stirrups 6.00
BEAM REINFORCEMENT (TWO BAYS) CONTINUOUS BEAM 1
Beam Length 1 L1 (M) 4.50
L2 Beam Depth D (M) 0.30
Column Width Max Cw(M) 0.25
# of Non-
Continuous Bars
Top Bars 2 3 16.00
Web Bars - - 16.00

Bottom Bars 2 3 16.00

TOP BARS
# of 6m Length Deformed Bars required as Non-Continuous Bars 3.00
WEB BARS
# of 6m Length Deformed Bars required as Web Bars
BOTTOM BARS
# of 6m Length Deformed Bars used as Continuous Bars 4.00
Number of 16mm bars required as main bars 13.00

Number of 16mm bars required as web bars -
Number of 10mm bars required as stirrups 2.00
ONE WAY SLAB
QUANTITY OF REINFORCING STEEL BARS IN A ONEWAY REINFORCED CONCRETE SLAB
BAR SPACING IN CM. NUMBER OF STEEL BARS PER SQUARE METER

10.000 3.764
12.500 3.062
15.000 2.584
17.500 2.232
20.000 1.980
22.200 1.786
25.000 1.627
Length L (M) 9.00

Width W (M) 7.00
Bar Spacing cm 22.20
# of Steel Bar Constant factor c 1.786

# of Ties #16 Constant factor c 0.110
# OF STEEL BARS required pcs @ 6M 113.00
# OF #16 TIE WIRE required KGS 7.00
TWO WAY SLAB
BAR
SPACING NUMBER OF STEEL BARS PER SQUARE METER
IN CM.
10.000 4.369
12.500 3.603
15.000 3.221
17.500 2.647
20.000 2.360
22.200 2.168
25.000 1.977
Length L (M) 3.00

Width W (M) 4.00

REINFORCED GROUND SLAB (BARS SPACING MORE THAN 25CM)
Length L (M) 9.00

Width W (M) 7.00
Bar Spacing along W cm 40.00
Bar Spacing along L cm 40.00
# OF STEEL BARS USED PARALLEL TO L pcs @ 6M 31.00

# OF STEEL BARS USED PARALLEL TO W pcs @ 6M 30.00
CONCRETE STAIRS
Riser Height RH (M) 0.18
Tread Run TR (M) 0.30
Stair Width W (M) 1.00
# of Steps N 14.00
Stringer Thickness TS (M) 0.30
0.38 0.35
Spacing (M)
0.30
Spacing (M) Steps Lateral Bar diameter (mm)
0.30 12
Stringer Lateral Bar diameter (mm)
12
Spacing (M)
0.30
0.30 12
Stringer Horizontal Bar diameter (mm)
10
Number of 12 mm Lateral Bars required @ Steps pcs @ 6M 7.00
Number of 12 mm Horizontal Bars required @ Steps pcs @ 6M 7.00
Number of 12 mm Lateral Bars required @ Stringer pcs @ 6M 5.00
Number of 10 mm Horizontal Bars required @ Stringer pcs @ 6M 3.00
# OF #16 TIE WIRE USED KGS 2.00
NOTES: DOWELS FOR LATERAL BARS ARE ALREADY INCLUDED IN THE ESTIMATES
FOR STAIRS LANDINGS YOU MAY USE THE SLAB REINFORCEMENT CALCULATOR
M Wall Height H (M) 3.50

M Wall Length L (M) 10.00
SQ.M. Wall openings SQ.M 1.68
60cm Constant Factor VERTICAL 2.13
3 layers Constant Factor HORIZONTAL 2.15
SQ.M. TOTAL WALL AREA: 320.00
pcs @ 6M # OF VERTICAL BARS USED: 114.00
pcs @ 6M # OF HORIZONTAL BARS USED: 115.00
Kgs #16 TIE WIRE USED: 15.10
M
M
pcs
pcs
Units
M
0.05m to 0.075m
M
M
LHS TOTAL WT 266.58133 KGS
Kgs
M
M
M
pcs
LHS
LHS
Kgs
M Column Height H (M) 4.80

Units Number of Columns # 3.00
mm Reinforcement Bar Diameter required Ø 16.00
M Column Dimension D1 (M) 0.15
pcs Number of Vertical Bars (M) 6.00

mm Stirrup bar diameter required Ø 10.00
M Stirrups Spacing (M) 0.13
1 0.25
M Use End Hook: 1.500
M Total length of each bars should be more than or equal to: 6.00
LHS Total Number of Vertical Bars @ 6M: 18.00
6
M Cut Length of each stirrups: 1.00
pcs Number of Stirrups per Column: 49.00
LHS Total Number of Bars used for stirrups @ 6M : 25.00
M
Units
mm
M
pcs
mm
M
M
M
LHS
M
M
LHS
Kgs
M
m
LHS
Kgs
M
M
M
M
Units
mm
mm
mm
mm
M
pcs
pcs
pcs
pcs
pcs
pcs
pcs
pcs
Kgs
M
M
M
M
M
Units
mm
mm
mm
mm
M
pcs
pcs
pcs
pcs
pcs
pcs
pcs
pcs
Kgs
CONCRETE SLAB
TIES (KGS)
0.474
0.316
0.228
0.168
0.132
0.110
0.089
M
M
CM
pcs
KGS
CONCRETE SLAB
TIES (KGS)
0.592
0.416
0.350
0.247
0.174
0.168
0.142
M
M
CM
pcs
KGS
M
M
CM
CM
pcs
pcs
KGS
M
M
M
Steps
M
0.73
pcs
pcs
pcs
pcs
KGS
standard hooks
finished, bend
bar size 90 180
diameter
X(MM) Y(MM)
10ø(#3) 60 180 100
12ø(#4) 72 216 120
16ø(#5) 96 288 160
20ø(#6) 120 360 200
22ø(#7) 132 396 220
M 25ø(#8) 150 450 250
M 28ø(#9) 224 560 336
SQ.M. 32ø(#10) 256 640 384
60cm 36ø(#11) 288 720 432
3 layers
SQ.M.
pcs @ 6M
pcs @ 6M
Kgs
RECTANGULAR COLUMN REINFORCEMENT 150X350 2ND FLOOR


1 0.25
6

d hooks
180
Y(MM)
100
120
160
200
220
250
336
384
432
M
Units
mm
M
M
pcs
mm
M
M
M
LHS
M
pcs
LHS
Kgs
ITEM - III STEEL REINFORCEMENT
LENGTH OF REINFORCING BARS FOR CHB IN METERS
(M) LENGTH
(M) LENGTH
OF
OF SPACEING
VERT. SPACING (CM) HORIZONTA
VERTICAL LAYER
L REIN./
REIN./SQ.M.
SQ.M.
40 2.93 2 Layers 3.300
60 2.13 3 Layers 2.150
80 1.6 4 Layers 1.720
Wall Height H (M) 3.50

Wall Length L (M) 10.00
Wall openings SQ.M 1.68
Constant Factor VERTICAL 2.13
Constant Factor HORIZONTAL 2.15
TOTAL WALL AREA: 33.32
# OF VERTICAL BARS USED: 12.00
# OF HORIZONTAL BARS USED: 12.00
FOOTING MATTING
Footing Length L (m) 1.20
Footing Width W (M) 1.20
# of Bars along L # 6.00
Number of Bars along W # 6.00
Number of Footing # 9.00
Clear Cover Cc (M) 0.075
Standard Clear Cover for footing =0.05m to 0.075m
Net. Length along L 1.05

Net. Length along W 1.05
# OF REIN. BARS USED: 21.78
WALL FOOTING REINFORCEMENT
Wall Footing Width W (M) 0.40
Wall Footing Total Length LT (M) 7.60
Spacing of Tie Bars for Wall footing (M) 0.40
Total # of Ties: 20.00

Total # of Horizontal Bars Used: 3.00
Overall Total # of Bars used: 5.00


1 0.25
Use End Hook: 1.500
6
Total Number of Bars used for stirrups @ 6M : 152.00
CIRCULAR COLUMN REINFORCEMENT

Column Diameter D1 (M) 0.30

1 0.2
Use End Hook: 0.200
6 Circular Stirrups
Total Number of Bars required for stirrups @ 6M : 35.00
Spiral Stirrups
Number of Stirrup Loops per Column: 28.50
Total Number of Bars required for stirrups @ 6m : 30.00
BEAM REINFORCEMENT (BEAM TO BEAM = LESS THAN 6.0 METERS) ONE BAY
Beam to Beam Length L (M) 5.00

Beam Depth D (M) 0.30
Column Width Cw(M) 0.30
# of Non-
Continuous Bars
Top Bars 3 - 16.00
Web Bars - - 12.00

Bottom Bars 2 - 16.00

TOP BARS
WEB BARS
# of 6m Length Deformed Bars required as Web Bars -
BOTTOM BARS
Number of 16mm bars used as main bars 5.00

Number of 12mm bars used as web bars -
Number of 10mm bars used as stirrups 6.00
BEAM REINFORCEMENT (TWO BAYS) CONTINUOUS BEAM 1
L2 Beam Depth D (M) 0.30
Column Width Max Cw(M) 0.25
# of Non-
Continuous Bars
Top Bars 2 3 16.00
Web Bars - - 16.00

Bottom Bars 2 3 16.00

TOP BARS
WEB BARS
# of 6m Length Deformed Bars required as Web Bars
BOTTOM BARS
# of 6m Length Deformed Bars used as Continuous Bars 4.00
Number of 16mm bars required as main bars 13.00

Number of 16mm bars required as web bars -
Number of 10mm bars required as stirrups 2.00
ONE WAY SLAB
BAR SPACING IN CM. NUMBER OF STEEL BARS PER SQUARE METER

10.000 3.764
12.500 3.062
15.000 2.584
17.500 2.232
20.000 1.980
22.200 1.786
25.000 1.627
Length L (M) 9.00

Width W (M) 7.00

TWO WAY SLAB
BAR
SPACING NUMBER OF STEEL BARS PER SQUARE METER
IN CM.
10.000 4.369
12.500 3.603
15.000 3.221
17.500 2.647
20.000 2.360
22.200 2.168
25.000 1.977
Length L (M) 3.00
Width W (M) 4.00

REINFORCED GROUND SLAB (BARS SPACING MORE THAN 25CM)
Length L (M) 9.00

Width W (M) 7.00
Bar Spacing along W cm 40.00
Bar Spacing along L cm 40.00
# OF STEEL BARS USED PARALLEL TO L pcs @ 6M 31.00

# OF STEEL BARS USED PARALLEL TO W pcs @ 6M 30.00
CONCRETE STAIRS
Riser Height RH (M) 0.18
Tread Run TR (M) 0.30
Stair Width W (M) 1.00
# of Steps N 14.00
Stringer Thickness TS (M) 0.30
0.38 0.35
Spacing (M)
0.30
0.30 12
Stringer Lateral Bar diameter (mm)
12
Spacing (M)
0.30
0.30 12
Stringer Horizontal Bar diameter (mm)
10
Number of 12 mm Lateral Bars required @ Steps pcs @ 6M 7.00
Number of 12 mm Horizontal Bars required @ Steps pcs @ 6M 7.00
Number of 12 mm Lateral Bars required @ Stringer pcs @ 6M 5.00
Number of 10 mm Horizontal Bars required @ Stringer pcs @ 6M 3.00
# OF #16 TIE WIRE USED KGS 2.00
NOTES: DOWELS FOR LATERAL BARS ARE ALREADY INCLUDED IN THE ESTIMATES
FOR STAIRS LANDINGS YOU MAY USE THE SLAB REINFORCEMENT CALCULATOR
M Wall Height H (M) 3.50

M Wall Length L (M) 10.00
SQ.M. Wall openings SQ.M 1.68
60cm Constant Factor VERTICAL 2.13
3 layers Constant Factor HORIZONTAL 2.15
SQ.M. TOTAL WALL AREA: 320.00
pcs @ 6M # OF VERTICAL BARS USED: 114.00
pcs @ 6M # OF HORIZONTAL BARS USED: 115.00
M
M
pcs
pcs
Units
M
0.05m to 0.075m
M
M
LHS
Kgs
M
M
M
pcs
LHS
LHS
Kgs


1 0.25
6
M
Units
mm
M
pcs
mm
M
M
M
LHS
M
M
LHS
Kgs
M
m
LHS
Kgs
M
M
M
M
Units
mm
mm
mm
mm
M
pcs
pcs
pcs
pcs
pcs
pcs
pcs
pcs
Kgs
M
M
M
M
M
Units
mm
mm
mm
mm
M
pcs
pcs
pcs
pcs
pcs
pcs
pcs
pcs
Kgs
CONCRETE SLAB
TIES (KGS)
0.474
0.316
0.228
0.168
0.132
0.110
0.089
M
M
CM
pcs
KGS
CONCRETE SLAB
TIES (KGS)
0.592
0.416
0.350
0.247
0.174
0.168
0.142
M
M
CM
pcs
KGS
M
M
CM
CM
pcs
pcs
KGS
M
M
M
Steps
M
0.73
pcs
pcs
pcs
pcs
KGS
M
M
SQ.M.
60cm
3 layers
SQ.M.
pcs @ 6M
pcs @ 6M
Kgs
RECTANGULAR COLUMN REINFORCEMENT 150X350 2ND FLOOR


1 0.25
6

M
Units
mm
M
M
pcs
mm
M
M
M
LHS
M
pcs
LHS
Kgs
ITEM - II MASONRY WORKS
A. DETERMINING THE NUMBER OF CONCRETE HOLLOW BLOCKS USED
B. DETERMINING THE NUMBER OF CEMENT & VOLUME OF SAND FOR MORTAR & PLASTERING
Wall Height H (M) 3.00 M
Wall Length L (M) 63.00 M
Area of Window AW (SQ.M.) - SQ.M
Area of Door AD (SQ.M) - SQ.M.
Breakage Allowance % 3.00 %
TOTAL WALL AREA: 189.00 SQ.M.

TOTAL NUMBER OF CHB: 2,434.00 PCS
MORTAR USING 4" CHB

VOL. OF SCREENED SAND CU.M. 8.30 CU.M.
MORTAR USING 6" CHB
VOL. OF SCREENED SAND CU.M. 16.00 CU.M.
PLASTER : 16mm thk Mix: 1:2

One face ofthe wall only
VOL. OF FINE SAND CU.M. 3.10 CU.M.
PLASTER : 16mm thk Mix: 1:2
Two faces of the wall
VOL. OF FINE SAND CU.M. 6.10 CU.M.
RIPRAPING WORKS
Height H (M) 2.00 M
Width 1 W1 (M) 1.00 M
Width 2 W2 (M) 0.60 M
Length L (M) 20.00 M
Using: Stones ranging from 15 to 25 kgs with

atleast 50% of stones weighing more
than 20 kgs, & Class A Mixture
TOTAL SIDE AREA: 1.60 SQ.M.

TOTAL VOLUME: 32.00 CU.M.
VOL. OF BOULDERS CU.M. 32.00 CU.M.
AR & PLASTERING
k Mix: 1:2
k Mix: 1:2
ground floor
TILING WORKS
Enter Wall or Floor Area 45.00 SQ.M.
Enter Breakage Allowance (5 - 10%) 5.00 %
Tile Size # of PCS

Inches cm per Sq.m.
3x3 7.5 x 7.5 8,402.00
4x4 10 x 10 4,725.00
4 1/4 x 4 1/4 10.6 x 10.6 4,177.00
4x8 10 x 20 2,363.00
6x6 15 x 15 2,100.00
6x8 15 x 20 1,575.00
6 x 12 15 x 30 1,050.00
8x8 20 x 20 1,182.00
8 x 12 20 x 30 788.00
8 x 16 20 x 40 591.00
10 x 16 25 x 25 756.00
12 x 12 30 x 30 525.00
12 x 24 30 x 60 263.00
16 x 16 40 x 40 296.00
20 x 20 50 x 50 189.00
24 x 24 60 x 60 132.00
Cement Mortar 4.00 BAGS

White Cement 23.00 KGS
Adhesive 5.00 BAGS
second
TILING WORKS
Tile Size # of PCS

Inches cm per Sq.m.
3x3 7.5 x 7.5 8,402.00
4x4 10 x 10 4,725.00
4 1/4 x 4 1/4 10.6 x 10.6 4,177.00
4x8 10 x 20 2,363.00
6x6 15 x 15 2,100.00
6x8 15 x 20 1,575.00
6 x 12 15 x 30 1,050.00
8x8 20 x 20 1,182.00
8 x 12 20 x 30 788.00
8 x 16 20 x 40 591.00
10 x 16 25 x 25 756.00
12 x 12 30 x 30 525.00
12 x 24 30 x 60 263.00
16 x 16 40 x 40 296.00
20 x 20 50 x 50 189.00
24 x 24 60 x 60 132.00

Adhesive 5.00 BAGS
carport
TILING WORKS
Tile Size # of PCS

Inches cm per Sq.m.
3x3 7.5 x 7.5 3,361.00
4x4 10 x 10 1,890.00
4 1/4 x 4 1/410.6 x 10.6 1,671.00
4x8 10 x 20 945.00
6x6 15 x 15 840.00
6x8 15 x 20 630.00
6 x 12 15 x 30 420.00
8x8 20 x 20 473.00
8 x 12 20 x 30 315.00
8 x 16 20 x 40 237.00
10 x 16 25 x 25 303.00
12 x 12 30 x 30 210.00
12 x 24 30 x 60 106.00
16 x 16 40 x 40 119.00
20 x 20 50 x 50 76.00
24 x 24 60 x 60 53.00

Adhesive 2.00 BAGS
PAINTING WORKS
Unit Convers1 Gallon = 4 Liters Enter Wall Area ### SQ.M.
Covera
Simplified Construction Estimate Enter Coverage 25.00 ge/Gal
Table 10-6 Kinds of Paint, Uses and Area Coverage Enter # of Coats 2.00 Coats
PRIMERS Number of Gallons 8.00 Gals
KIND OF PAINT USES THINING DRYING TIME COVERAGE/Gal WATER BASE MASONRY PAINT
2 hrs, allow
1. Interior For interior
Paint overnight 25 to 30
Primer & wood KIND OF PAINT USES THINING DRYING TIME
COVERAGE/Gal
Thinner b4 sq.m.
Sealer surfaces
recoating
6 hrs, allow Exterior &
2. Exterior For exterior 30 minutes
Paint overnight 30 to 40 1. Acrylic Interior 1/2 lts/ 4 lts 30 to 40
Wood wood allow 6 hrs
Thinner b4 sq.m. Latex Paint masonry water sq.m.
Primer surfaces b4 recoat
recoating surfaces
Primer for Exterior &
3. Red 2. Acrylic 30 minutes
ferrous and Paint 35 to 40 Interior 30 to 40
Oxide 3 Hours Semi-Gloss Water allow 6 hrs
non-ferrous Thinner sq.m. masonry sq.m.
Primer Latex b4 recoat
materials surfaces
Rust
Exterior &
preventive 30 minutes
4. Red Lead Paint 30 to 40 3. Acrylic Interior 30 to 40
primer for 3 Hours Water allow 6 hrs
Primer Thinner sq.m. Gloss Latex masonry sq.m.
ferrous b4 recoat
surfaces
surfaces
For
furniture,
cabinets,
For Steel, 6 hrs, allow doors, 1 Hour.
4. Latex Hi-
5. Epoxy Aluminum, Epoxy overnight 30 to 40 windows, Allow 4 hrs 30 to 40
Gloss Usse as is
Primer Galvanized Reducer b4 sq.m. tools, toys, before sq.m.
Enamel
iron recoating wrought recoating
iron, &
primed
metals
5. Tinting Acrylic
water
Colors colors
ROOF PAINT
KIND OF PAINT USES THINING DRYING TIME
COVERAGE/Gal ENAMEL AND GLOSS PAINT
for G.I.
1. All Shts, 4 hrs. allow
weather asbestos overnight 40 to 50
water KIND OF PAINT USES THINING DRYING TIME
COVERAGE/Gal
acylic roof bricks before sq.m.
shield concrete recoating
and stucco
G.I. roofs
for exterior
and other 6 hrs. allow 5 hrs. allow
1. Quick & interior
2. Davies metal such Paint overnight 30 to 40 Paint 8 hrs. 30 to 40
Drying wood and
Roof paint as Thinner before sq.m. Thinner before sq.m.
Enamel metal
aluminum recoating recoating
surface
and steel
Interior 6 hrs. allow
2. Interior
wood and Paint overnight 25 to 30
semi-Gloss
metal Thinner before sq.m.
Enamel
surfaces recoating
3 hrs. allow
for interior
3. Flat wall Paint overnight 40 to 50
wall &
Enamel Thinner before sq.m.
ceilings
recoating
for exterrior
wood and 6 hrs. allow
4. Exterior properly Paint 48 hrs. 30 to 35
Gloss paint primed Thinner before sq.m.
metal recoating
VARNISHING surfaces
5. Tinting Oil Base
KIND OF PAINT USES THINING DRYING TIME
COVERAGE/Gal
Colors tinting color

for floors,
1. Valspar sidings
Paint 40 to 50
or Spar furnitures, 24 hours
Thinner sq.m.
Varnish deck of
boats
for interior
new wood 10 minutes.
2. Hi-solid furnitures Allow 30
Lacquer 40 to 50
sanding and minutes
Thinner sq.m.
sealer fixtures, before
cabinet, recoat
doors, etc.
for interior
new wood Allow 30
3. Hi-solid
furnitures, Lacquer minutes 30 to 40
clear gloss
door Thinner before sq.m.
Lacquer
panelling recoat
and trim.
for interior
new wood Allow 30
4. Hi-solid
furnitures, Lacquer minutes 30 to 40
Semi-gloss
cabinets, Thinner before sq.m.
Lacquer
doors, recoat
shelves, etc
for interior
wood
furniture, Allow 30
5. Hi-solid
cabinets, Lacquer minutes 30 to 40
dead flat
door jambs, Thinner before sq.m.
Lacquer
trim recoat
panelling,
etc.
for
furnitures,
Allow 30
6. Water cabinets,
Lacquer minutes 30 to 40
white gloss doors,
Thinner before sq.m.
Lacquer panel and
recoat
interior
walls

GE/Gal
GE/Gal

CARPENTRY WORKS
Determining the total board foot of a lumber.
Number of pieces # 50.00 PCS
Lumber Dimension W1(IN) 2.00 inches
W2(IN) 4.00 inches
L L(FT) 12.00 feet (ft)
TOTAL # OF LUMBER IN BD.FT Bd.ft. 400.00 BD.FT
W2
W1
Determining the total board foot of a round log

FORMULA: (D - 4)² x L
16
Number of pieces # 1.00 PCS

lumber Dimension D1(IN) 28.00 inches
L(FT) 20.00 feet (ft)
TOTAL # OF LUMBER IN BD.FT Bd.ft. 720.00 BD.FT
Determining the total lengths or pcs of a certain lumber from Bd.ft.
total Bd.ft : Bd.ft. 720

L desired lumber dimension : W1 (in) W2 (in) L (ft)
2 4 10
TOTAL # OF LUMBER IN PIECES/LENGTHS PCS 108.00 PCS

W2
W1
NUMBER OF BOARD FOOT OF STUDS & NAILING JOIST PER SQUARE METER
Lumber
size in
SPACING IN CENTIMETER (C TO C )
inches 30 x 30 30 x 60 40 x 40 40 x 60 60 x 60
1x2 4.103 3.147 3.189 2.686 2.268
2x2 8.198 6.293 6.379 5.373 4.594
2 x 3 12.284 9.440 9.569 8.060 6.898
2 x 4 16.414 12.592 12.758 10.746 9.195
Length of Wall/Ceilling/Flooring L (M) 9.00 M

Height of Wall/Ceilling/Flooring H (M) 3.00 M
Constant Factor C 6.898
# OF BD.FT OF STUDS & NAILING JOIST USED: BD.FT 186.25 BD.FT.
total Bd.ft : Bd.ft. 186.25

desired lumber dimension : W1 (in) W2 (in) L (ft)
2 3 8
TOTAL # OF LUMBER IN PIECES/LENGTHS PCS 47.00 PCS
USING 1/4" ORDINARY PLYWOOD or 4' x 8' HARDIFLEX BOARD

OF 4'X 8' ORDINARY PLYWOOD USED (ONE SIDE) SHTS 10 Sheets
OF 4'X 8' ORDINARY PLYWOOD USED (TWO SIDES) SHTS 19 Sheets
# OF 1" CWNails Used for Boards (ONE SIDE) KGS 0.6 KGS
# OF 1" CWNails Used for Boards (TWO SIDES) KGS 1.1 KGS
1/2" CWNails Used for Joining the Studs together KGS 1.4 KGS
E METER
ROOFING WORKS
Side Lapping 2 1/2 1 1/2

Effective Width 0.60 0.70
End Lapping 25cm - 30 cm
Pitch
12
DETERMINING THE DESIRABLE NUMBER OF SHEETS IF USING MORE THAN ONE SHEET
Rafter L1 3.2310989 Enter Span (Ls) M 3.00 M
Angle 0.4227932 Enter Height (H) M 1.20 M
H2 0.40 Enter Projection Width (Bulada) M 1.00 M
Rafter L2 1.0767661
# of pulins 8.00 Total Length of Rafter M 4.31 M
USING ONLY TWO SHEETS
Roofing Length 4.38 Total Roofing Net Length M 4.38 M
2.40 Enter Roof Sheet Length 1 FT 8 FT
Overlap 0.42 M 1.37 FT
OK Roof Sheet combination
USING THREE SHEETS

Roofing Length 4.38 Total Roofing Net Length M 4.38 M
3 2.10 Enter Roof Sheet Length 3 FT 8 FT
Overlap 1.41 M 4.62 FT
OK Roof Sheet combination
But not economical, cost you more money!
End Lapping must not be more than 2 f
DETERMINING THE NUMBER OF ROOF SHEETS
Side Lapping 2 1/2 1 1/2

Effective Width 0.60 0.70
Enter Roofing total with M 11.00 M
Enter Effective Width M 0.70 M
USING ONLY TWO SHEETS
Number of the 1st Roof sheet used @ 8 feet long at one side only 16 Sheets
Number of the 2nd Roof sheet used @ 8 feet long at one side only 16 Sheets
Number of Umbrella Nails/Tekscrews 5 KGS
Note: Must multiply by two if the other side of the roof is similar
USING THREE SHEETS
Number of the 1st Roof sheet used @ 8 feet long at one side only 16 Sheets
Number of the 2nd Roof sheet used @ 8 feet long at one side only 16 Sheets
Number of the 3rd Roof sheet used @ 8 feet long at one side only 16 Sheets
Number of Umbrella Nails/Tekscrews 8 KGS
Not recommended, cost you more money!
Note: Must multiply by two if the other side of the roof is similar
R
o
o
f
W
i
d
t
h Roof Width
ROOF ACCESSORIES
ITEM Effective Length in Meters
Gutter 2.35
Flashing 2.3
Ridge Roll 2.2
Valley Roll 2.3
Hipped Roll 2.2
Enter Total Covered Length 11.00 M

Enter Effective Length 2.20 M
Number of Roof Accessories Used 5 PCS
FORMS
DETERMINING THE TOTAL MATERIALS USED FOR SQUARES & RECTANGULAR COLUMN FORM
Enter Column Height M

Column Dimension A M
Column Dimension B M
Co Enter Number of Columns Units
lu 1.20
m Note: One form per column - (Resusable form)
n 4' Total # of Bd.ft of frame required:
He 118.68
OR Enter desired lumber dimension : W1 (in) W2 (in)
igh 2.
t 4 2 3
M Total Number of Lumber: 30.00
Total Number of Plywood required: 4.00
Total Number of #2 1/2 CWNails: 1.00
Total Number of #1 Finishing Nails: 0.40
DETERMINING THE TOTAL MATERIALS USED FOR BEAMS & GIRDER FORMS
Enter Beam Length M

Beam Dimension D M
Beam Dimension B M
Enter Number of Beams Units
0.90
Total Beam Length
Total # of Bd.ft of frame required: 252.00
W1 (in) W2 (in)
2 3
Total Number of Lumber: 63.00
D Total Number of Plywood required: 9.00
Total Number of #2 1/2 CWNails: 2.10
Total Number of #1 Finishing Nails: 0.90
SCAFFOLDINGS
PARTS OF SCAFFOLDINGS
1. Vertical Support
2. Base of Vertical Support
3. Horizontal Member
4. Diagonal Braces
5. Block and Wedges
6. Nails & Bolts
COLUMN BEAM
r Column Height M 3.00 Enter Beam Length M
ter # of Columns Units 10.00 Enter # of Beams Units
l Column Height: 30.00 M. Ht. Total Beam Length: 21.00
FLOORING
Enter Floor Area SQ.M. 80.00
QUANTITY OF LUMBER FOR SCAFFOLDING OR STAGING

Lumber Column Beam
Flooring
Size Vertical Horizontal Brace Vertical Horizontal
2" x 2" 141.00 630.00 351.00 84.00 98.70 488.00
2" x 3" 210.00 950.10 525.00 126.00 147.00 728.00
2" x 4" 280.50 1,267.50 700.50 168.00 196.35 968.00
Enter total # of Bd.ft of Lumber required: 224.40

W1 (in) W2 (in)
2 4
Total Number of Lumber: 43.00
Total Number of #4 CWNails: 22.00
GULAR COLUMN FORMS
1.22
0.25
0.25
4.00
11.52
(Resusable form)
Bd.ft
L (ft)
8
PCS
Sheet(s)
KGS
Kgs
7.00
0.30
0.20
4.00
25.20
Bd.ft
L (ft)
8
PCS
Sheet(s)
KGS
Kgs
M
3.50
6.00
M. Ht.
Bd.ft
L (ft)
8
PCS
KGS

Ramos H. Bumanglag A. Santos J

Uploaded by

Copyright:

Available Formats

Ramos H. Bumanglag A. Santos J

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ramos H. Bumanglag A. Santos J

Uploaded by

Copyright:

Available Formats

FOOTING FORMULA: VOLUME = L * W * T

CLASS A CONCRETE MIX

FLOOR SLAB FORMULA: VOLUME = L * W * T

FLOOR SLAB - BY AREA

BASED ON MAX FAJARDO - SIMPLIFIED CONSTRUCTION ESTIMATE HANDBOOK

CONCRETE COLUMNS COLUMN DIMENSIONS:

AreaCirc 0.07 SQ.M.

FORMULA: VOLUME = H * AreaCirc

BASED ON MAX FAJARDO - SIMPLIFIED CONSTRUCTION ESTIMATE HANDBOOK

0.42 0.98 1.40

TOTAL VOLUME OF CONCRETE: 1.40 CU.M.

STAIR LANDING T 0.15

TOTAL VOLUME OF CONCRETE:

BASED ON MAX FAJARDO - SIMPLIFIED CONSTRUCTION ESTIMATE HANDBOOK

40 2.93 2 Layers 3.300

60 2.13 3 Layers 2.150

80 1.6 4 Layers 1.720

DETERMINING THE NUMBER OF BARS USED

Wall Height H (M) 3.00

Net. Length along L 1.05

Total # of Ties: 139.00

RECTANGULAR COLUMN REINFORCEMENT 350X350 1ST FLOOR

Column Height H (M) 3.50

Number of Vertical Bars (M) 4.00

#16 TIE WIRE USED: 18.60

CIRCULAR COLUMN REINFORCEMENT

Column Height H (M) 3.50

Number of Vertical Bars (M) 6.00

Beam to Beam Length L (M) 5.00

Top Bars 3 - 16.00

Web Bars - - 12.00

Stirrup Bars Diameter required: 10.00

Number of 16mm bars used as main bars 5.00

Top Bars 2 3 16.00

Web Bars - - 16.00

Stirrup Bars Diameter required: 10.00

Number of 16mm bars required as main bars 13.00

QUANTITY OF REINFORCING STEEL BARS IN A ONEWAY REINFORCED CONCRETE SLAB

BAR SPACING IN CM. NUMBER OF STEEL BARS PER SQUARE METER

Length L (M) 9.00

# of Steel Bar Constant factor c 1.786

TWO WAY SLAB

QUANTITY OF REINFORCING STEEL BARS IN A ONEWAY REINFORCED CONCRETE SLAB

Length L (M) 3.00

# of Steel Bar Constant factor c 1.977

REINFORCED GROUND SLAB (BARS SPACING MORE THAN 25CM)

Length L (M) 9.00

# OF STEEL BARS USED PARALLEL TO L pcs @ 6M 31.00

M Wall Height H (M) 3.50

RECTANGULAR COLUMN REINFORCEMENT 150X350 1ST FLOOR

M Column Height H (M) 4.80

pcs Number of Vertical Bars (M) 6.00

Kgs #16 TIE WIRE USED: 3.40

M Column Height H (M) 3.00

pcs Number of Vertical Bars (M) 6.00

Kgs #16 TIE WIRE USED: 0.80

40 2.93 2 Layers 3.300

60 2.13 3 Layers 2.150

80 1.6 4 Layers 1.720