Professional Documents
Culture Documents
BOQ
BOQ
Bill of Quantities
Volume – III
January 2011
Karnataka State Highways Improvement Project-II, Stage 1 Volume III: BOQ
BILL OF QUANTITIES
A. Preamble
1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General and
Special Conditions of Contract, Technical Specifications, and Drawings.
2. The quantities given in the Bill of Quantities are estimated and provisional, and are given to
provide a common basis for bidding. The basis of payment will be the actual quantities of
work ordered and carried out, by the Contractor and verified by the Engineer and valued at the
rates and prices bid in the priced Bill of Quantities, where applicable, and otherwise at such
rates and prices as the Engineer may fix within the terms of the Contract.
3. The rates and prices bid in the priced Bill of Quantities shall, except insofar as it is otherwise
provided under the Contract, include all Constructional Plant, labour, supervision, materials,
erection, maintenance, insurance, profit, taxes, and duties, together with all general risks,
liabilities, and obligations set out or implied in the Contract.
4. A rate or price, in Figures as well as words, shall be entered against each item in the priced Bill
of Quantities, whether quantities are stated or not. The cost of items against which the
Contractor has failed to enter a rate or price shall be deemed to be covered by other rates and
prices entered in the Bill of Quantities.
5. The whole cost of complying with the provisions of the Contract shall be included in the items
provided in the priced Bill of Quantities, and where no items are provided, the cost shall be
deemed to be distributed among the rates and prices entered for the related items of work.
6. General directions and descriptions of work and materials are not necessarily repeated nor
summarised in the Bill of Quantities. References to the relevant sections of the Contract
documentation shall be made before entering prices against each item in the priced Bill of
Quantities.
7. Provisional Sums included and so designated in the Bill of Quantities shall be expended in
whole or part at the direction and discretion of the Engineer in accordance with Sub-Clause
13.5 and Clause 13.6 of the General Conditions of Contract.
8. The method of measurement of completed work for payment shall be in accordance with the
provisions of the MORT&H Specifications for Road and Bridge Works (4th Revision)
published by the Indian Roads Congress.
9. Errors will be corrected by the Employer for any arithmetic errors in computation as follows:
(a) Where there is a discrepancy between amounts in figures and in words, the amount in
words will govern; and
(b) Where there is a discrepancy between the unit rate and the total amount derived from
the multiplication of the unit price and the quantity, the unit rate as quoted will
govern, unless in the opinion of the Employer, there is an obviously gross
misplacement of the decimal point in the price, in which event the total amount as
quoted will govern and the unit rate will be corrected.
10. Hard Rock is defined as all materials which, in the opinion of the Engineer, require blasting, or
the use of metal wedges and sledgehammers or the use of compressed air drilling for their
removal, and which cannot be extracted by ripping with a tractor of at least 150 brake-
horsepower with a single, rear-mounted, heavy-duty ripper.
11. Measurement for lined side drains shall be on unit rate basis, in accordance with various items
of work involved in the execution of the drain work.
12. ABBREVITATIONS
mm Millimetre
cm Centimetre
m Metre
km Kilometre
Sqm Square metre
ha Hectare
Sq.km Square Kilometre
cum Cubic Metre
l Litre
kl Kilolitre
kg Kilogram
t.km tone kilometre
MoRT&H Ministry of Road Transport and Highways
IS Indian Standard
IRC Indian Roads Congress
T&P Tools and Plants
GI Galvanized Iron
CI Cast Iron
RCC Reinforced Cement Concrete
PCC Plain Cement Concrete
GL Ground Level
Rs Rupees
Dia Diametre
Min Minimum
Max Maximum
No Number
hr Hour
i.e, That is
eg For example
WBM Water Bound Macadam
BM Bituminous Macadam
SDBC Semi-Dense Bituminous Concrete
BC Bituminous Concrete
FE loader Front end Loader
OMC Optimum Moisture Content
L Lead in Kilometer
HMP Hot Mix Plant
RR Road Roller
WMM Wet Mix Macadam
LM Liner Metre
cu.cm Cubic centimetre
T Tonne
GRAND TOTAL
AMOUNT IN RUPEES __________________________________________________________________
Procure (Purchase) and Supply brand new vehicles for Employer Site staff.
1.01 including Registration, Full Comprehensive Insurance (1st year) Number plate,
Road Tax , etc. As per Tech. Spec. Cl.124
a) Mahindra Scorpio SLX Turbo 2.6 – 7 seater option 4 x 4 wheel drive CRDE
No 1.00
EURO II or "Equivalent approved"
Supply of video cassette: Taking video film of important activities for playing
1.03
time of 180 minutes each as per Tech.Spec. Cl. 126
a) Start of the Contract Sets. 1.00
b) During execution of Works Sets. 2.00
c) End of the Contract Sets. 1.00
VolumeIII : BOQ 1 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
VolumeIII : BOQ 2 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
BILL NO.3 - EARTHWORKS
Roadway excavation necessary for construction of roadway and drainage includes
dressing, trimming and compacting the cut formation in accordance with
3.01 requirements of lines, grades and cross fall complete as per Technical
Specification clause 301. and disposal of all cut material including necessary
stacking of suitable material with all lead and lift .
a) In all types of Soil Cum 243,172.00
b) Ordinary Rock (not requiring blasting) Cum 12,159.00
c) Hard Rock (controlled blasting) Cum 1,351.00
VolumeIII : BOQ 3 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
VolumeIII : BOQ 4 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Providing and laying bituminous tack coat with bituminous emulsion complete as
5.02
per Technical Specification clause 503
a) Over bituminous surface. Sqm 222,806.00
Providing and laying Dense graded Bituminous Macadam (DBM) course Grading
2 of Table 500-10 using paving bitumen complying to IS specification IS : 73-
5.03 Cum 11,127.00
2006 of Viscosity grade bitumen VG-30 complete as per Technical Specification
Clause 507
Providing and laying Semi Dense Bituminous Concrete using paving bitumen
5.05 complying to IS specification IS : 73-2006 of Viscosity grade bitumen VG-30 Cum 5,059.00
complete as per Technical Specification Clause 508.
VolumeIII : BOQ 5 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
BILL NO. 6 – CULVERTS
Earth work in excavation of foundation for structure complete including all leads
6.01
and lifts as per drawing and Technical Specification clauses 304 and 2903.
Providing backfilling behind abutment, wing wall, return wall or any other area
6.02 with selected granular materials of approved quality complete as per drawing and Cum 4,096.00
Technical Specification clauses 305, 2907 and IRC 78
Providing and laying filter media behind abutment, wing wall and return wall
6.03 Cum 208.00
complete as per drawing and Technical Specification clauses 309 and 2504..
Providing, cutting & fixing in position TMT bar reinforcement complete as per
6.07 T 189.00
drawing & Technical Specification section 1600.
VolumeIII : BOQ 6 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Providing and fixing galvanized drainage spouts complete as per drawing and
6.10 No 32.00
Technical Specification clause 2705.
Providing & laying reinforced cement concrete (grade M-25) in approach slab
including reinforcement & bituminous joint filler between approach slab & dirt
6.11 Cum 78.00
wall complete as per drawing and Technical Specification section 1500,1600,
1700 & 2704.
Providing, laying and jointing RCC NP-4 pipes (as per IS: 458-1988) Hume pipes
6.12 for culverts complete as per drawing and Technical Specification section 2900
and IRC : SP : 13-1973.
a) (Item No.6.12.a, Not Used) - -
Providing and fixing PVC pipe of 100mm dia. for weep holes in abutment, wing
6.13 No 1,068.00
wall and return wall complete as per Technical Specification clause 2200 & 2706.
Providing and laying stone pitching in slope and apron (300 mm thick) for earth
6.14 Cum 1,023.00
protection complete as per drawing and Technical Specification clause 2504
Providing and fixing Marker Post for buried culvert as per drawing, IRC:7-1971
6.15 and directions of the Engineer including painting the necessary details with No 6.00
synthetic enamel as per directions of the Engineer
VolumeIII : BOQ 7 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Painting with two coats of new concrete surface after filling the surface with
6.18 Synthetic enamel paint in all shades on new plastered concrete surface complete Sqm 294.00
as per specification clause.803.
Providing, laying and jointing RCC NP-3 pipes (as per IS: 458-1988) Hume pipes
6.19 for culverts complete as per drawing and Technical Specification section 2900
and IRC : SP : 13-1973.
a) Diameter 900 mm Lm 500.00
Filling in foundation with sand and granite boulders of 100 to 150mm size in
6.21 foundation including watering, tamping with all leads and lifts, etc., complete as Cum 389.00
per drawing.
Total Carried to Summary
VolumeIII : BOQ 8 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Backfilling behind abutment, wing wall and return wall or any other area with
7.02 selected granular materials of approved quality complete as per drawing and Cum 691.00
Technical Specification clause 305, 2900 & IRC 78.
Providing and laying filter media behind abutment, wing wall and return wall
7.03 Cum 395.00
complete as per drawing and Technical Specification clauses 309 and 2504.
Providing and laying Cement Concrete flooring / leveling complete as per
7.04
drawing and Technical Specification 1400, 1500, 1700, 2100 & 2500.
a) M-15 Grade Cum 566.00
Providing and laying cement concrete / reinforced cement concrete for foundation
and sub-structure excluding cost of reinforcement with all leads and lifts as per
7.05
drawing and Technical Specification section 1500, 1700 2100, 2200 & 2300. and
as directed by Engineer
a) (Item No. 7.05.a, Not Used) - -
b) (Item No. 7.05.b, Not Used) - -
VolumeIII : BOQ 9 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Providing, cutting and fixing in position TMT bar reinforcement complete as per
7.08 T 250.00
drawing and Technical Specification section 1600.
Providing and fixing tar paper bearing complete reinforced with bitumen
7.10 laminated Kraft paper conforming to IS-1398 and as per drawing and Technical
Specification section 2000 & IRC SP13
Supplying, fitting & fixing in position true to line and level Elastomeric Bearing
a) conforming to IRC:83(part II) section IX and Technical Specification Cl Cu.cm 176,000.00
2000,2005 & 2200.
b) (Item No.7.10.b, Not Used) - -
c) (Item No.7.10.c, Not Used) - -
d) (Item No.7.10.d, Not Used) - -
VolumeIII : BOQ 10 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Provinding filling joint sealing compound as per drawing with coarse sand with
7.12 Lm 70.00
6% bitumen by weight as per Technical Specification clause 2605
Providing and fixing galvanized drainage spouts complete as per drawing and
7.13 No 41.00
Technical Specification clause 2705.
Providing, laying and erecting cement concrete grade M-40 in Crash Barrier
7.14 excluding the cost of reinforcement complete as per drawing and Technical Lm 316.00
Specification clause 809 and sections 1500,1600 and 1700.
Providing & laying reinforced cement concrete (grade M-30) in approach slab
including reinforcement & bituminous joint filler between approach slab & dirt
7.15 Cum 108.00
wall complete as per drawing and Technical Specification section 1500,1600,
1700 & 2704.
VolumeIII : BOQ 11 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
BILL NO. 7 – BRIDGES, Contd.,
Brought forward from page 3
Providing and fixing PVC pipe 100mm dia. for weep holes in abutment, wing
7.16 No 510.00
wall and return wall complete as per Technical Specification clause 2706 & 2200.
Providing and fixing in position 150mm dia PVC pipe 2.5kg /Sqcm pressure of
7.17 Lm 632.00
approved make for utility ducts in foot path as directed by Engineer
Painting of bridge no and span arrangement as per IRC-7: 1971 drawings and
7.18 No 24.00
direction of the engineer. Tech Spec Cl. 800
Construction of Gabion wall with segments of wire crates as per Tech Spec Cl.
7.20 Cum 90.00
2503
7.21 Construction of Gabion mattress 170 mm thick as per Tech Spec. 2503 Sqm 1,225.00
7.22 Construction of Gabion mattress 230 mm thick as per Tech Spec. 2503 Sqm 1,121.00
Painting with water proof cement paint of approved brand and shade in two coat
7.24 on all exposed surfaces, including cost of materials, labour complete as per Sqm 1,914.00
specification clause.800.
Painting with two coats of new concrete suface after filling the surface with
7.25 Synthetic enamal paint in all shades on new plastered concrete surface complete Sqm 951.00
as per specification clause.803.
VolumeIII : BOQ 12 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
7.30 Providing plastering 12mm thk, with cement mortor 1:3 as per Tech, Spec 1300. Sqm 48.00
Providing and laying stone pitching on slopes (300 mm thick) for earth protection
7.31 Cum 281.00
and aprons complete as per drawing and Technical Specification clause 2504
Providing and laying filter media below stone pitching as per drawing and
7.32 Cum 103.65
Technical Specification clause 309 and 2504.
VolumeIII : BOQ 13 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Carrying out repair of RCC m30 railing to bring it to the original shape, by
cutting and trimming the damaged portion to a regular shape, cleaning the area to
be repaired thoroughly, applying cement concrete after erection of proposed form
7.35 Lm 50.00
work, reinforcements and disposing of dismantled material, including cost of
materials, labour, hire charges of machinery, lead, lifts, loading, unloading etc.,
complete as per direction of Engineer.
VolumeIII : BOQ 14 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Providing and installing Single Metal Beam Crash Barrier system comprising of
"W" profile beams, posts, spacer channels, terminal pieces, reflectors and
8.02 Lm 7,849.00
requisite number of fasteners including Foundation complete as per Drawing
U/T/09 and technical specification Cl 810.
8.03 Construction of lined drains and footpath, Toe walls as per drawings
Cement Concrete grade M15 including form work for levelling coarse as per Tech
a) Cum 162.00
Spec. 1500 & 1700.drawing no.U/T/04
Cement Concrete grade M20 including form work for sub-structure as per Tech
b) Cum 87.00
Spec. 1500 & 1700. drawing no.U/T/04
TMT steel reinforcement bars complete as per bending schedule drawing Tech
e) T 58.00
Spec. 1600, 1800 & 2300.
Providing and fixing 100 mm dia PVC pipes as per Tech Spec. 2706 & 2200 and
g) Lm 126.00
drawing no.U/T/04
Total Carried to page 2
VolumeIII : BOQ 15 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
VolumeIII : BOQ 16 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Supplying and fixing sign boards including the cost of posts, fixtures,
foundation, fitting and fixing. Sheeting will be made of encapsulated lens type of
9.03 Retro-reflective type and messages/ borders will be screen printed complete as per
Technical Specification clause 801 and as directed by Engineer. and as per
drawing no.U/T/03
a) Mandatory/Regulatory Traffic Signs Type IX
i) Octagonal 900x 900 mm No 23.00
ii) Circular 600mm dia No 18.00
(a) Informatory Signs, Facility Signs, Direction Signs, Advance Direction/
b) Sqm 48.60
Destination Signs, Route Marker Signs etc. Type IX
c) Cautionary warning signs (Triangular 900mm sides) Type IX No 78.00
d) Chevrons No 358.00
Providing and laying pavement marking with hot applied thermoplastic paints
9.04 conforming to ASTM D-36/ BS 3262 (Part-I) complete as per drawing and
Technical Specification clause 803 and drawings no.U/T/11
i) Lane/ centerline / edge marking / transverse and any other marking. Sqm 8,518.07
Directional arrows, lettering etc. as per drawing No. U/T/11 and Tech. Spec. Cl.
ii) No 48.00
803.
iii) Stop Line Major/Minor Junctions No 28.00
iv) Stop Letters No 28.00
v) Diagonal/Chevron Marking No 20.00
Total Carried to page 2
VolumeIII : BOQ 17 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Providing and fixing Road Delineators complete as per drawing and Technical
9.06 Specification clause 805 and direction of the Engineer and as per drawing no.
U/T/10
i) For Curves-Type1 No 971.00
Providing and laying of a reinforced cement concrete NP-3 pipe duct , 450mm
dia across the road, extending from drain in cuts and toe of slope to toe of slope in
fills, constructing head walls at both ends, providing a minimum fill of granular
material over top and sides of RCC pipe as pre IRC:98-1997, bedded on a 0.3m
thick layer of granular material free of rock pieces, outer to outer distance of
9.08 Lm 545.00
pipeat least half dia of pipe subject to minimum 450mm in case of double and
triple row ducts, joints to be made leak proof, invert level of duct to be above
higher than ground level to prevent entry of water and dirt as per approved
drawings including cost of all materials, labour, loading, unloading, lead, lift,
transporting etc., complete and as directed by Engineer.
VolumeIII : BOQ 18 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
BILL NO.9 – TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES , Contd.,
Brought forward from page2
Supplying and fixing of Road Studs (Raised Pavement Markers) Conforming to
ASTM D4280 type "H" in position as indicated in the drawings and as directed
9.09 No 1,664.00
by Engineer as per Technical Specification clause 812. and as per drawing
no.U/T/08
Provide Bus bays as per drawing no.U/T/05 including lane/ line marking and
9.10 No 18.00
painting & as per direction of Engineer.
Providing and laying Island fill/Median Fill with available earth materials
9.13 Cum 1,298.00
complete as per Technical Specification clause 407
Providing and fixing guard post as directed by Engineer and as per drawings
9.15 No 1,235.00
no.U/T/10
Providing Solar Studs complete as per Technical Specifications Clause 814 and
9.19 No 18.00
conforming to IRC:SP:55:2001. As per Drawing no U/T/16
Total Carried to Summary
VolumeIII : BOQ 19 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
BILL NO.10 - SAFETY IN ROAD CONSTRUCTION ZONE
Supplying and fixing sign boards including the cost of posts, fixtures,
foundation, fitting and fixing. Sheeting will be made of encapsulated lens type of
10.01
Retro-reflective type and messages/ borders will be screen printed complete as per
Technical Specification clause 112 & 801 and as directed by Engineer.
i) Octagonal 900x 900 mm type IX No 20.00
ii) Circular 600mm dia type IX No 15.00
iii) Informatory as per drawing type IX Sqm 30.00
iv) Cautionary warning signs (Triangular 900mm sides) TypeIX No 15.00
Providing of red fluorescent with white reflective sleeve traffic cone made of low
density polyethylene(LDPE) material with a square base of 390x390x35mm and a
10.02 height of 770mm, 4Kg in weight, placed at 1.5m interval, all as per BS 873 No 150.00
including cost of all materials, labour, loading, unloading, lead, lift, transporting
etc complete Technical Specification section 112 & 801 & IRC SP 55-2001.
Installation of a steel portable barricade with horizontal rail 300mm wide, 2.5m in
length fitted on a "A" frame made with 45X45X5 mm angle iron section, 1.5m in
height, horizontal rail painted(2coat) with yellow and white strips, 150mm in
10.03 width at angle of 45degree, "A" frame painted with 2 coats of yellow paint, No 50.00
complete as per IRC:SP:55-2001 including cost of all materials, labour, loading,
unloading, lead, lift, transporting etc complete. as per Technical Specifiction Cl.
112
Provision of metal drum/empty bitumen drum delineator, 300mm in diameter,
800mm high, filled with earth for stability, painted in circumferential strips of
alternate black and white 100mm wide 2 coats fitted with reflectors 3 Nos of
10.04 No 150.00
7.5cm dia, all as per IRC:SP:55-2001 including cost of all materials, labour,
loading, unloading, lead lift, transporting etc., complete as per Technical
Specifiction Cl. 112
Providing plastic crash barrier as per drawing and per the directions of the
10.05 Engineer(1000X490X780MM size)(LxWxH) as per Technical Specification No 75.00
Clause 112
Providing Barricading/Caution Tapes of High quality PVC tape tube type to
10.06 Lm 2,500.00
Enclose construction area as per Technical Specification Clause 112
VolumeIII : BOQ 20 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
Bill. No. 11. Implementation of Environmental Management Action Plan to be executed under Civil Works Contract
A. Carting away the unserviceable materials from work site to the nearest
disposal site (up to a lead of 10km) and disposing the same in disposal pits or
11.01 Cum 9,963.00
borrow areas including depositing unserviceable materials in layers and manual
compaction as per Technical Specification Clause 111.14
B. The 30 cm top layer of disposal pit shall be provided with good earth, suitable
for development of vegetation/plantation. All work shall be carried out as per
Sqm 49,815.00
specifications and approval of the Engineer in Charge as per Technical
Specification Clause 111
Regular water sprinkling (at least 4 times) per day at all construction sites for
suppression of visible dust levels as per Technical Specification Clause 111
11.03 Note: This item is to be operated after the completion of earthwork to suppress Km 23.00
the visible dust levels. Cost of watering during compaction of earth work is deem
to be cover under civil work.
Construction of Recharge pits within the selected water bodies along the project
11.04 road as per approved design and drawing as developed by Central Ground Water No 5.00
Board as per Technical Specification Clause 111 and as per drawing no. U/T/17
Providing informatory sign boards (informatory /caution messages) for road users
for providing information about ecologically sensitive areas, wild life crossing
points (if any), important tourist locations, etc as applicable. The specifications of
11.06 Sqm 2.00
sign boards shall conform to relevent IRC specifications. using type- IX sheeting
the locations for Informatory sign boards are given in as per Technical
Specification Clause. 111
VolumeIII : BOQ 21 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
Bill. No. 11. Implementation of Environmental Management Action Plan to be executed under Civil Works Contract
Brought Forward From Page 1
Construction of 30cm thick clay lined (at bottom and sides) pits for safe disposal
of scarified bitumen including carriage (up to a lead of 10km), depositing
11.07 bitumen in layers of 15 cms with manual compaction and covering the pit with No 14.00
20cm thick good earth as top layer all complete as per Typical Drawing as per
Technical Specification Clause. 111
Turfing at ground level at disposal pits for scarified bitumen as per specification
11.08 Sqm 4,725.00
clause 307 and approval of the Engineer in Charge.
VolumeIII : BOQ 22 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
BILL OF QUANTITIES Contract No: AEP2
CONTRACT PACKAGE AEP2
Estimated Rate (Rs.)
Sl. No. Description Unit Amount (Rs.)
Quantity In Figures In Words
Bill. No. 11. Implementation of Environmental Management Action Plan to be executed under Civil Works Contract
Brought Forward From Page 2
Water quality monitoring during construction phase at locations given in
Appendix . The sampling shall be carried out once in four month for 2 years and
11.12 No 12.00
cover all parameters as per IS10500 including heavy metals As per Technical
Specification Clause-111
Provision for two health check ups for the carcinogens from bituminous fumes,
which may inhaled during road paving works. The first health check up prior to
11.17 induction of the personnel into the construction works and the last health check cost/ person 100.00
up prior to the discharge of tech personal from the construction works as per
Technical Specification Clause 111
VolumeIII : BOQ 23 of 23
Karnataka State Highways Improvement Project - II International Competitive Bidding
Contract No:AEP2
BILL OF QUANTITIES
CONTRACT PACKAGE AEP2
SUMMARY OF DAY WORKS
Amount
Sl. No. Item
Rs.
1 Schedule of Dayworks, Labour
LABOUR
Nominal Rate Amount
Sl. No. Description Unit
Quantity Rs. Rs.
1 Mazdoor Day 30
2 Mason Day 15
3 Carpenter Day 6
4 Fabricator/Blacksmith/Welder Day 6
5 Operator for Tractor Day 6
6 Electrician Day 3
7 Operator for Dozer Day 3
8 Operator for Roller Day 3
9 Driver LMV Day 90
10 Driver HMV Day 3
11 Operator for Excavator/Crane Day 3
12 Computer Operator Day 480
13 Watchman Day 480
Sub total
Allow_________% Contracotor's Overhead and Profits etc.
Total For Day works: Labour
MATERIALS
Nominal Rate Amount
Sl. No. Description Unit
Quantity Rs. Rs.
1 Bitumen 60/70 grade (bulk ) T 1
2 Cement T 3
3 M 15 Concrete Cu.m 7
4 M 20 Concrete Cu.m 7
5 M 25 Concrete Cu.m 3
6 TMT Bars T 3
7 Sand Cu.m 7
8 Aggregate 40 mm down size Cu.m 7
9 Aggregate 20 mm down size Cu.m 7
10 Aggregate 10 mm down size Cu.m 7
11 Granite Stone of size 15 to 20 mm No. 1,000
solid concrete block size 400 x 200
No. 1,000
12 mm size
Hume pipe (NP 4) 900 mm dia 2.5
Rm 15
13 m long.
14 Boulders Cu.m 90
15 Selected Earth Cu.m 230
Sub total
Allow_________% Contracotor's Overhead and Profits etc.
Total For Day works: Materials
CONSTRUCTION PLANT
Nominal Rate Amount
Sl. No. Description Unit
Quantity Rs. Rs.
1 Bull Dozer Size up to 200KW Hour 30
2 Front End Loader bach hoe Hour 30
3 Motor Grader Hour 12
4 Pneumatic Tyred Roller (20 tonne) Hour 12
5 Tractor with trailor Hour 12
6 Bull dozer (D7 or equivalent) Hour 10
7 Roller Static (8-10 tonne) Hour 3
8 Roller Vibratory (8-10 tonne static) Hour 3
9 Truck (10/12 tonne) Hour 30
Truck mounted water tanker (10
Hour 15
10 tonne)
11 DG set (125 KVA) Hour 15
12 Concrete Mixer (mobile) Hour 3
13 Drilling equipment with compressor Hour 3
Sub total
Allow_________% Contracotor's Overhead and Profits etc.
Total For Day works:Construction Plant
BILL OF QUANTITIES
C. Daywork Schedule
General
Daywork Labour
2. In calculating payments due to the Contractor for the execution of Daywork, the hours
for labour will be reckoned from the time of arrival of the labour at the job site to
execute the particular item of Daywork to the time of return to the original place of
departure, but excluding meal breaks and rest periods. Only the time of classes of
labour directly doing work ordered by the Engineer and for which they are competent to
perform will be measured. The time of gangers (charge hands) actually doing work
with the gangs will also be measured but not the time of foremen or other supervisory
personnel.
3. The Contractor shall be entitled to payment in respect of the total time that labour is
employed on Daywork, calculated at the basic rates entered by him in the SCHEDULE OF
DAYWORK RATES: LABOUR, together with an additional percentage payment on basic
rates representing the Contractor’s profit, overheads, etc., as described below:
(a) The basic rates for labour shall cover all direct costs to the Contractor,
including (but not limited to) the amount of wages paid to such labour,
transportation time, overtime, subsistence allowances, and any sums paid to
or on behalf of such labour for social benefits in accordance with Indian
law. The basic rates will be payable in local currency only;
(b) The additional percentage payment to be quoted by the Bidder and applied
to costs incurred under (a) above shall be deemed to cover the Contractor’s
profit, overheads, superintendence, liabilities, and insurances and
allowances to labour, timekeeping, and clerical and office work, the use of
consumable stores, water, lighting, and power; the use and repair of
stagings, scaffolding, workshops and stores, portable power tools, manual
plant, and tools; supervision by the Contractor’s staff, foremen, and other
supervisory personnel; and charges incidental to the foregoing. Payments
under this item shall be made in the following currency proportions:
(i) Foreign: _____ percent [to be stated by Bidder]
Daywork Materials
4. The Contractor shall be entitled to payment in respect of materials used for Daywork
(except for materials for which the cost is included in the percentage addition to labour
costs as detailed heretofore), at the basic rates entered by him in the SAMPLE SCHEDULE
OF DAYWORK RATES: MATERIALS, together with an additional percentage payment on
the basic rates to cover overhead charges and profit, as follows:
(a) The basic rates for materials shall be calculated on the basis of the invoiced
price, freight, insurance, handling expenses, damage, losses, etc., and shall
provide for delivery to store for stockpiling at the Site. The basic rates shall
be stated in local currency, but payment will be made in the currency or
currencies expended upon presentation of supporting documentation.
(b) The additional percentage payment shall be quoted by the Bidder and
applied to the equivalent local currency payments made under (a) above.
Payments under this item will be made in the following currency
proportions:
(i) Foreign: _____ percent [to be stated by Bidder]
(c) The cost of hauling materials for use on work ordered to be carried out as
Daywork from the store or stockpile on the Site to the place where it is to be
used will be paid in accordance with the terms for Labour and
Constructional Plant in this schedule.
6. In calculating the payment due to the Contractor for Constructional Plant employed in
Daywork, only the actual number of working hours will be eligible for payment, except
that where applicable and agreed with the Engineer, the travelling time from the part of
the Site where the Constructional Plant was located when ordered by the Engineer to be
employed on Daywork and the time for return journey thereto shall be included for
payment.
7. The basic rental rates for Constructional Plant employed on Daywork shall be stated in
local currency, but payments to the Contractor will be made in currency proportions, as
follows:
(i) Foreign: _____ percent [to be stated by Bidder]