Samsung Secret

Product Information

DATE : 30. Jan. 2012

SAMSUNG TFT-LCD

MODEL : LTA320AN12

The Information Described in this Specification is Preliminary and can be changed without
prior notice

LCD Business

Samsung Electronics Co . , LTD.

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 1 / 26

 Contents Samsung Secret

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (6)

3. Electrical Characteristics ------------------------------------------------------------------------------- (9)

3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Converter Input & Specification

4. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)

4.1 Input Signal & Power
4.2 Converter Input Pin Configuration
4.3 Converter Input Power Sequence
4.4 LVDS Interface
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color

5. Interface Timing ---------------------------------------------------------------------------------------- (17)

5.1 Timing Parameters (DE mode)
5.2 LVDS Input data Characteristics
5.3 Timing Diagrams of interface Signal (DE mode)
5.4 Power ON/OFF Sequence

6. Outline Dimension -------------------------------------------------------------------------------------- (20)

7. Packing --------------------------------------------------------------------------------------------------- (22)

8. Marking & Others --------------------------------------------------------------------------------------- (23)

9. General Precaution ------------------------------------------------------------------------------------ (24)

9.1 Handling
9.2 Storage
9.3 Operation
9.4 Operation Condition Guide
9.5 Others

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 2 / 26

 Samsung Secret
Revision History

Rev.
Date Page Summary
No

30. Jan.
000 All First issued
2012

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 3 / 26

General Description Samsung Secret

Description
LTA320AN12 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT
(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a
driver circuit and a back light unit. The resolution of a 32.0“ is 1366 x 768 and this model can
display up to 16.7 million colors with wide viewing angle of 89° or higher in all directions. This
panel is intended to support applications to provide a excellent performance for Flat Panel Display
such as Home-alone Multimedia TFT-LCD TV and High Definition TV

Features
 RoHS compliance (Pb-free)
 High contrast ratio & aperture ratio with wide color gamut
 PVA (Patterned Vertical Align) mode
 Wide viewing angle (±178°)
 High speed response
 HD resolution (16:9)
 Low Power consumption
 Edge Type LED (Light Emitted Diode) BLU
 DE (Data Enable) mode
 1Ch LVDS (Low Voltage Differential Signaling) interface (1pixel/clock)

General Information
Items Specification Unit Note
734.4 (H) X 430.3 (V) ±1.0mm
Module Size mm With wall mount
33.7 (D max)
stud
Weight 5300 (Max) g

Pixel Pitch 0.51075 (H) × 0.17025 (V) mm

Active Display Area 697.6845 (H) X 392.256 (V) mm

Surface Treatment Hard-coating Anti-glare

Display Colors 8 bit – 16.7 M colors

Number of Pixels 1366 x 768 pixel

Pixel Arrangement RGB vertical stripe

Display Mode Normally Black

Luminance of White 320 (Typ.) cd/m2

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 4 / 26

 Samsung Secret
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.3 16 V (1)

Storage temperature TSTG -20 60 ℃

(2)
Operating temperature TOPR 0 50 ℃

Shock ( non - operating ) X,Y,Z - 50 G (3)

Vibration ( non - operating ) VNOP - 1.5 G (4)

Note (1) Ta= 25 ± 2 °C

(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. Relative Humidity is 90% or less. (Ta ＞39 °C)
c. No condensation
(3) 11ms, sine wave, one time for ±X, ±Y, ±Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

Fig. Temperature and Relative humidity range

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 5 / 26

2. Optical Characteristics Samsung Secret

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON RD-80S, TOPCON SR-3, ELDIM EZ-Contrast

(Ta = 25 ± 2°C, VDD=12V, fv= 60Hz, fDCLK = 78MHz, Duty = 100%)

Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (1)
C/R - 4000 -
(Center of screen) SR-3
Response (3)
G-to-G Tg - 20 - msec
Time RD-80S
Luminance of White (4)
YL - 320 - cd/m2
(Center of screen) SR-3
Rx Normal TBD
Red qL,R =0
Ry TBD
qU,D =0
Gx TBD
Green
Color Gy Viewing TBD
TYP. TYP. (5),(6)
Chromaticity Angle
Bx -0.03 TBD +0.03 SR-3
(CIE 1931)
Blue
By TBD
Wx 0.280
White
Wy 0.290
Color Gamut - - 70 - % (5)
SR-3
Color Temperature - - 10000 - K
qL 79 89 -
Hor.
Viewing qR 79 89 - (6)
C/R≥10 Degree
Angle qU 79 89 - EZ-Contrast
Ver.
qD 79 89 -
White Brightness
(2)
Uniformity Buni - - 30 %
SR-3
(9 Points)

- Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Environment condition : Ta = 25 ± 2 °C

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 6 / 26

 Samsung Secret

Photo detector
Photo detector Field

SR-3 2°
RD-80S 1° Field

SR-3 : 50㎝
RD-80S : 50㎝

TFT - LCD Module

LCD Panel

The center of the screen

- Definition of test point

227 683 1139

Active Area
128 ⑨ ⑧ ⑦
Test Point
384 ⑥ ⑤ ④

640 ③ ② ①

Note (1) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 7 / 26

 Samsung Secret

Note (2) Definition of 9 points brightness uniformity (Test pattern : Full White )

( B max B min)
Buni  100
B max

Bmax : Maximum brightness

Bmin : Minimum brightness

Note (3) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) Black (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME

Note (4) Definition of Luminance of White : Luminance of white at center point ⑤

Note (5) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point ⑤

Note (6) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 8 / 26

 Samsung Secret
3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25°C ± 2 °C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 10.8 12.0 13.2 V (1)
(a) Black - 400 500 mA
Current of
Power (b) White IDD - 500 600 mA (2),(3)
Supply
(c) V-STRIPE - 600 700 mA
Vsync Frequency fV 50 60 66 Hz
Hsync Frequency fH 44 48 53 kHz
Main Frequency fDCLK 72 78 85 MHz
Rush Current IRUSH - - 4 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=60Hz, fDCLK = 78MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)

a) Black Pattern b) White Pattern c) V-STRIPE

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=470㎲
Rush Current IRUSH can be measured when TRUSH. is 470㎲.

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 9 / 26

 Samsung Secret
3.2 Back Light Unit

The back light unit contains Edge type White LEDs (Light Emitting Diode)

Ta=25 ± 2°C

LCD Module

Converter

Item Symbol Min. Typ. Max. Unit Note

Operating Life Time Hr 30000 - - Hour (1)

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original
value.
[Operating condition : Ta = 25±2℃, For LED package only. ]
(2) Test condition : 130mA, 2000 Hr

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 10 / 26

 Samsung Secret
3.3 Converter Input Condition & Specification

Specifications
Items Symbol Conditions Unit Note
Min. Typ. Max.

Input Voltage Vin - 22 24 26 V Ta=25±2 °C

Vin=24.0V
Input Current IRUSH - - 2.5 A
Vdim =3.3V

Output Vin = 24.0V

IO,MAX 124 130 136 mArms
Current V dim =3.3 V

ON Vin=24.0 V 3 - 5.25
Backlight
V
On/Off
OFF Vin=24.0 V 0 - 0.4

Dimming Range V_DIM Vin :22~26V 0 - 3.3 V (2)

D max Vin=24V Dim:3.3V 100 - -

Dimming Duty
Output
% (2)
D min Vin=24V Dim:0V - 1 -

Dimming
Frequency
FPWM Vin=24.0 V 140 150 160 Hz (2)

External Dimming
EX_Dim Min 1 - 100 %
Duty Range

External Dimming Dim Pin(#13)

FEX_PWM Vin=22.0~26.0 V 138 - 164 Hz
Frequency Range : Floating

High (ON) 3.0 - 5.25

External Dimming
VPWM V
Signal Level
Low (Off) 0 - 0.4

Note) Power Consumption is measured when 320 [cd/m ] of luminance which is the typical
luminance.

(1) All data is measured after 120min warm-up.

(2) only use #Pin 13

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 11 / 26

 Samsung Secret
4. Input Terminal Pin Assignment

4.1. Input Signal & Power Connector :IS100-L30O-C23

PIN No. Description PIN No. Description

1 VIN (12V) 16 LV1_P

2 VIN (12V) 17 GND
3 VIN (12V) 18 LV2_N
4 VIN (12V) 19 LV2_P
5 N.C 20 GND
6 GND 21 LVCLK_N
7 GND 22 LVCLK_P
8 N.C 23 GND
9 LVDS_SEL (note 2) 24 LV3_N
10 N.C 25 LV3_P
11 GND 26 GND
12 LV0_N 27 N.C
13 LV0_P 28 N.C
14 GND 29 N.C
15 LV1_N 30 GND

Note1) No Connection: This PINS are only used ONLY for SAMSUNG.
Note2) LVDS OPTION : If this PIN is HIGH (3.3 V) → Normal LVDS format
LOW (GND) → JEIDA LVDS format

SEQUENCE : On = VDD(T1) ≥ LVDS Option ≥ Interface Signal(T2)

OFF = Interface Signal(T3) ≥ LVDS Option ≥ VDD

Vin T2 T3

LVDS
Option

LVDS
Signal
LVDS Option Sequence

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 12 / 26

 Samsung Secret

Note(1) Pin number starts from Left side

PCB
▼

Pin No. 1 Pin No. 30

#1 #30

#1 #30

Fig. Connector diagram

a. Power GND pins should be connected to the LCD’s metal chassis.

b. All power input pins should be connected together.
c. All NC pin should be separated from other signal or power.

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 13 / 26

4.2. converter Input Pin Configuration Samsung Secret
Connector : Yeon-ho, 20022WR-14B1
Pin Configuration(FUNCTION)
Pin No.
Master
1 24 V
2 24 V
3 24 V
4 24 V
5 24 V
6 GND
7 GND
8 GND
9 GND
10 GND
11 No connection
12 ENA [ converter on/off control signal ]
13 Dimming Control [0V:Min, 3.3V:Max] *Note(1)
14 External PWM [1~100%] *Note(1)

Note(1) If use Dimming Control, Pin 14 Must be N.C

If use External PWM, Pin 13 Must be N.C

4.3. converter Input Power Sequence

Vin (24V)

0.02sec [Min]

Dimming Control

External PWM
0.5sec [Min] 0.2sec [Min]

Backlight On/Off 0.5sec [Min]

0sec [Min] 0 sec [Min]

Note) SEQUENCE : ON = Vin(24V) > Dimming Control ≥ Backlight On/Off
OFF = Backlight On/Off ≥ Dimming Control > Vin(24V)

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 14 / 26

 Samsung Secret
4.4 LVDS Interface
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & VESA)
LVDS pin JEIDA -DATA VESA -DATA

TxIN/RxOUT0 R2 R0
TxIN/RxOUT1 R3 R1
TxIN/RxOUT2 R4 R2
TxOUT/RxIN0 TxIN/RxOUT3 R5 R3
TxIN/RxOUT4 R6 R4
TxIN/RxOUT6 R7 R5
TxIN/RxOUT7 G2 G0
TxIN/RxOUT8 G3 G1
TxIN/RxOUT9 G4 G2
TxIN/RxOUT12 G5 G3
TxOUT/RxIN1 TxIN/RxOUT13 G6 G4
TxIN/RxOUT14 G7 G5
TxIN/RxOUT15 B2 B0
TxIN/RxOUT18 B3 B1
TxIN/RxOUT19 B4 B2
TxIN/RxOUT20 B5 B3
TxIN/RxOUT21 B6 B4
TxOUT/RxIN2 TxIN/RxOUT22 B7 B5
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT26 DEN DEN
TxIN/RxOUT27 R0 R6
TxIN/RxOUT5 R1 R7
TxIN/RxOUT10 G0 G6
TxOUT/RxIN3 TxIN/RxOUT11 G1 G7
TxIN/RxOUT16 B0 B6
TxIN/RxOUT17 B1 B7
TxIN/RxOUT23 RESERVED RESERVED

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 15 / 26

 Samsung Secret

4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY
DISPLAY
COLOR RED GREEN BLUE SCALE
(8bit)
LEVEL
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

BASIC CYAN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
COLOR RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY ↑
: : : : : : : : : : : : : : : : : : R3~
SCALE
OF : : : : : : : : : : : : : : : : : : R252
RED ↓
LIGHT 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R253

0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R254

RED 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R255

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

DARK 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY ↑
SCALE : : : : : : : : : : : : : : : : : : G3~
OF : : : : : : : : : : : : : : : : : : G252
GREEN ↓
LIGHT 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G253

0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G254

GREEN 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 G255

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 B1

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 B2
GRAY ↑
SCALE : : : : : : : : : : : : : : : : : : B3~
OF : : : : : : : : : : : : : : : : : : B252
BLUE ↓
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 B253

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 B254

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 B255

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 16 / 26

 Samsung Secret
5. Interface Timing
5.1 Timing Parameters ( DE mode )
SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 72 78 85 MHz -

Hsync Frequency FH 44 48 53 KHz -

Vsync FV 50 60 66 Hz -

Active
Display TVD - 768 - Lines -
Vertical Period
Display Term
Vertical
TV 780 802 1200 Lines -
Total

Active
Display THD - 1366 - Clocks -
Horizontal Period
Display Term
Horizontal
TH 1460 1624 2000 clocks -
Total

Note) This product is DE mode. But the Hsync & Vsync signal must be inputted
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V
(3) Spread spectrum
- Modulation rate (max) : ± 1.5 % , Modulation Frequency : under 100KHz

5.2 LVDS Input Data Characteristics

ITEM SYMBOL Min. Typ. Max. UNIT NOTE

tRSRM - - 400 ps
Input Data
FIN=85MHz
Position
tRSLM -400 - - ps

Input common mode voltage VCM VSSL+0.6 1.2 VDDL-0.6 V -

Differential Input Voltage |VID| 100 - - mV -

Note) When the skew is measured the Spread Spectrum should be 0%

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 17 / 26

 Samsung Secret
5.2 Timing diagrams of interface signal ( DE mode )

TV

TVD TVB

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

TC
TCH Tcl

DCLK 0.5
VCC

TDS TDH

DISPLAY 0.5
DATA
VCC

TES

DE 0.5
VCC

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 18 / 26

5.3 Power ON/OFF Sequence Samsung Secret

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

2 msec<T1≤10msec
0<T2≤50msec
0<T3≤50msec
1000msec≤T4

1000msec≤T5
(Recommend Value) 0.5 Vcc
100msec≤T6
(Recommend Value)

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.
 The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
 Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
 In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
 T4 should be measured after the Module has been fully discharged between power off
and on period.
 Interface signal should not be kept at high impedance when the power is on.
 In Case T5 is less than 1000msec and T6 is less than 100msec,
Garbage Display can be seen. (It is not related to electrical function issue, Just for
recommendation to prevent Garbage Display )

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 19 / 26

 Samsung Secret
7. PACKING

7.1 CARTON (Internal Package)

(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method

7.2 Packing Specification

Item Specification Remark

- 5.5kg/LCD(48ea) : 264kg(Max.)
24ea / Box
- 15 kg / Packing Set : 30kg(Typ.)
LCD Packing 48ea / Pallet
(1104X810X480)
(Packing-Pallet Box)
- Packing Material: Paper

Pallet 2 Box/Pallet Pallet Weight: 5.3kg

Packing Direction Vertical -

Total Pallet Size 1150 * 850 * 1083 Length x Width x Height

Module (5.5 x 48 ) + Pallet (5.3 Kg) + Packing

Total Pallet Weight 300.74
SET (15) x2 + Desiccant (0.03 x 48 = 1.44kg)

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 22 / 26

 Samsung Secret
8. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.

(1) Part number : LTA320AN12

(2) Revision: Three letters
(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
(4) Nameplate Indication

TC Week code : 10 05
week
LTA320AN12
year
1005 40mm
XXXX
XXXXXXXXXX XXX
Revision code
Lot number

80mm
(5) Packing box attach

100mm
LTA320AN12 Part number

XXX
24

Box serial number

165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 23 / 26

9. General Precautions Samsung Secret
9.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the converter use high voltage, it should be disconnected from power
before it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and LED back light.

(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
semiconductor would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not disassemble shield case of converter & C-PBA

(m) Do not connect N.C pins. (Samsung internal use only)

(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handling a module
(o) Pins of I/F connector should not be touched directly with bare hands.

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 24 / 26

 Samsung Secret
9.2 Storage

We highly recommend to comply with the criteria in the table below.

Item Unit Min. Max.

Storage
(℃) 5 40
Temperature
Storage Humidity (%rH) 35 75
Storage Life 12 Months
- The storage room should provide good ventilation and temperature
control.
- Products should not be placed on the floor, but on the Pallet away
from
a wall.
- Prevent products from direct sunlight, moisture nor water; Be
cautious of
Storage a build up of condensation.
Condition - Avoid other hazardous environment while storing goods.
- If products delivered or kept in conditions of over the storage period
of 3
months, the recommended temperature or humidity range,
we recommend you leave them at a temperature of 20℃ and a
humidity
of 50% for 24 hours.

9.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its converter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the converter may cause lower luminance of LED and
may require higher startup voltage(Vs).

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 25 / 26

9.4 Operation Condition Guide Samsung Secret

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

9.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LTA320AN12 Doc. No 06-000-G-20120130 Page 26 / 26