Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 79 views

    Column Splice Design

    Uploaded by

    Rajesh Pore
    This document summarizes the design of a column splice connection for a project with a 500x500x25mm box column supporting an axial load of 15,000kN. It determines that each splice plate needs to support 2,135kN and have an area of 10,167mm2 with a thickness of 25mm. It also checks that the 12mm fillet weld along the 1470mm splice plate length is adequate to transfer the 2,135kN force between the plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Column Splice Design

    Uploaded by

    Rajesh Pore
    79 views1 page
    This document summarizes the design of a column splice connection for a project with a 500x500x25mm box column supporting an axial load of 15,000kN. It determines that each splice plate needs to support 2,135kN and have an area of 10,167mm2 with a thickness of 25mm. It also checks that the 12mm fillet weld along the 1470mm splice plate length is adequate to transfer the 2,135kN force between the plates.

    Original Title

    column_splice_design

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a column splice connection for a project with a 500x500x25mm box column supporting an axial load of 15,000kN. It determines that each splice plate needs to support 2,135kN and have an area of 10,167mm2 with a thickness of 25mm. It also checks that the 12mm fillet weld along the 1470mm splice plate length is adequate to transfer the 2,135kN force between the plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    79 views1 page

    Column Splice Design

    Uploaded by

    Rajesh Pore
    This document summarizes the design of a column splice connection for a project with a 500x500x25mm box column supporting an axial load of 15,000kN. It determines that each splice plate needs to support 2,135kN and have an area of 10,167mm2 with a thickness of 25mm. It also checks that the 12mm fillet weld along the 1470mm splice plate length is adequate to transfer the 2,135kN force between the plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Column Splice Connection

    Project: Godrej II
    Column: BOX 500X500X25
    Input
    Steel grade fy 350 Mpa
    Axial load on steel col Pu 15000 kN
    Assuming 50% laod will b transferred by bearing,
    Load on each Splice P1 = (Pu*0.5)/4 1875 kN
    Width of steel column B 500 mm
    Moment M 130 kNm
    Force acting due to moment P2 = M/B 260 KN
    Total force on each splice - 4 sides P 2135 KN
    Area required A = P/(0.6fy) 10167 mm2
    Assuming Width of Plate Wp=B-30 470 mm
    Thickness of plate req Tp=A / Wp 21.63 mm
    Provide Splice plate thk each side 25 mm

    WELD CHECK
    Factored Vertical force V 2135 kN
    Thickness of the weld t 12 mm
    Effective thickness of the weld tw 8.4 mm
    Length of the weld (shown in blue) lw =(Ls+Wp) 1470 mm
    Actual Shear stress 172.9 N/mm2 OK
    Permissible Shear stress q = 0.6fy 210 N/mm2
    Provide splice plate length Ls 1000 mm

    You might also like