Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 98 views

    Double Flap NRV SPEC

    Uploaded by

    tarunchauhan1
    This procurement request is to replace old swing check valves with new dual plate spring loaded check valves at Wadala Terminal in Mumbai to reduce maintenance issues. The scope includes supplying 7 4-inch, 3 6-inch, and 15 8-inch cast steel dual plate check valves within 4 weeks that meet technical specifications for material, testing, and dimensions. Payment terms are within 15 days of invoice receipt along with potential penalties for delayed delivery.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Double Flap NRV SPEC

    Uploaded by

    tarunchauhan1
    98 views7 pages
    This procurement request is to replace old swing check valves with new dual plate spring loaded check valves at Wadala Terminal in Mumbai to reduce maintenance issues. The scope includes supplying 7 4-inch, 3 6-inch, and 15 8-inch cast steel dual plate check valves within 4 weeks that meet technical specifications for material, testing, and dimensions. Payment terms are within 15 days of invoice receipt along with potential penalties for delayed delivery.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This procurement request is to replace old swing check valves with new dual plate spring loaded check valves at Wadala Terminal in Mumbai to reduce maintenance issues. The scope includes supplying 7 4-inch, 3 6-inch, and 15 8-inch cast steel dual plate check valves within 4 weeks that meet technical specifications for material, testing, and dimensions. Payment terms are within 15 days of invoice receipt along with potential penalties for delayed delivery.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    98 views7 pages

    Double Flap NRV SPEC

    Uploaded by

    tarunchauhan1
    This procurement request is to replace old swing check valves with new dual plate spring loaded check valves at Wadala Terminal in Mumbai to reduce maintenance issues. The scope includes supplying 7 4-inch, 3 6-inch, and 15 8-inch cast steel dual plate check valves within 4 weeks that meet technical specifications for material, testing, and dimensions. Payment terms are within 15 days of invoice receipt along with potential penalties for delayed delivery.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 7

    This PR is initiated for procurement of Dual Plate Check Valves (WAFER TYPE) for

    Wadala Terminal.

    Justification:

    Wadala Terminal is currently having swing check valves installed in Underground tank
    farm and Product pump house. The valves were installed long back and regular
    maintenance issues keep arising. In order to get rid of such frequent maintenance
    issues, we want to replace all the swing check valves with dual plate spring loaded
    check valves.

    Scope of Supply:

    This tender envisages procurement of various sizes of DUAL PLATE CHECK VALVES
    (WAFER TYPE) for Wadala Terminal.

    Scope of supply is as under:

    Complete manufacturing, testing, inspection and supply of Cast Steel Dual Plate
    (Wafer Type) Check Valves with Manufacturer’s test certificates and Third Party
    Inspection as per enclosed Tender schedule.

    Material shall be door-delivered at the locations.

    Location Address:
    HPCL, Wadala Terminal,
    Opp. BPT Hospital,
    Nadkarni Marg,
    Wadala(E), Mumbai-400037

    Delivery period:

     Delivery period shall be as under: - Within 4 weeks from date of LOI/PO.


     Unloading & stacking is in the scope of HPCL.

    Schedule of Quantities:

    Manufacturing, Testing, Inspection and Supply of CS Dual Plate


    Check Valves
    Tender Line No. Description Qty. Unit
    SUPPLY DUAL
    1 7 Each
    PLATE NRV - 4"
    SUPPLY DUAL
    2 3 Each
    PLATE NRV - 6"
    SUPPLY DUAL
    3 15 Each
    PLATE NRV - 8"
    NOTE:

    1) Material to be door-delivered at the location as mentioned above.


    2) Rates shall include testing & third party inspection charges.
    3) Rates shall be quoted considering packaging, loading & transportation charges
    also.

    TECHNICAL SPECIFICATIONS FOR CAST STEEL DUAL PLATE CHECK VALVE

    CAST STEEL DUAL PLATE CHECK VALVE

    MAKE: ZOLOTO or any HPCL approved make


    BODY: ASTM A 216 Gr WCB
    CLOUSER PLATE(DISC): WCB
    HING PIN: AISI 304
    STOP IN: AISI 304
    SPRING: STAINLESS STEEL
    SEAT: NIRTILE
    MFG STD.: GENERALLY CONFIRMING TO API 6D/API 594
    INSP & TEST STD: GENERALLY CONFIRMING TO API 6D/API 598
    FACE TO FACE CONNECTION: AS PER API 594
    HYD. TEST PRESSURE: BODY: 425 PSIG (30 KG/CM²)
    SEAT: 300 PSIG (21 KG/CM²)

    The wafer type dual plate check valve representation is as shown:


    Commercial Terms and Conditions:

    Delivery Period: 4 weeks from the date of issue of LOI/PO.


    Security Deposit:
    The tenderer, with whom the contract is decided to be entered into and intimation is so
    given will have to make a security deposit (of 1% of Value) demand draft any
    nationalized bank in favour of HINDUSTAN PETROLEUM CORPORATION LIMITED
    payable at Mumbai, within 15 days from the date of intimation of acceptance of their
    tender, failing which the owner reserves the right to cancel the Contract. This amount
    will be refunded after successful completion of the job free of interest.
    Payment Terms:
    Payment shall be made within 15 days of receipt of duly certified bills. Bills to be
    submitted in online BTS system with original transmittal with bill sent to CPC-West
    Zone and second copy of invoice and transmittal sent to location for making MRR

    Delayed delivery clause:


    The party should note that, the delivery period is the essence for this tender. The party
    should carry out the job within the stipulated contract period. If the party does not carry
    out the job within the stipulated period of the contract, HPCL reserves the right to
    deduct a sum equivalent to 0.5 percent of the contract value for every week or part
    thereof of the delay subject to a maximum of 5 percent of the total contract value from
    the party's bill.

    Guarantee:
    Supplied material shall be fully guaranteed against manufacturing defects / poor
    workmanship / inferior design / quality etc. for a minimum period of 12 months from the
    date of the commissioning or 18 months from the date of supply whichever is earlier.
    During this period seller will arrange to repair / replace any defective parts free of cost
    or replace complete set if required. Certificate should be submitted along with dispatch
    documents.

    Retention money:
    10% of the total value of the Running Account and Final Bill will be deducted and
    retained by the Owner as retention money on account of any damage/defect liability
    that may arise for the period covered under the defect liability period clause of the
    Contract free of interest. Any damage or defect that may arise or lie undiscovered at
    the time of issue of completion certificate connected in any way with the equipment or
    materials supplied by contractor or in workmanship shall be rectified or replaced by
    the contractor at his own expense failing which the Owner shall be entitled to rectify
    the said damage/defect from the retention money. Any excess of expenditure incurred
    by the Owner on account of damage or defect shall be payable by the Contractor. The
    decision of the Owner in this behalf shall not be liable to be questioned but shall be
    final and binding on the Contractor. Thus, deduction towards retention money is
    applicable only in case of job/works contracts (civil, mechanical, electrical,
    maintenance etc.) where any damage or defect may arise in future (i.e. within 12
    months from the date of completion of job) or lie undiscovered at the time of issue of
    completion certificate. The amount so withheld shall not bear any interest and shall be
    refunded on the successful completion of the defect liability period which shall normally
    be 12 months.

    You might also like