Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 636 views

    176 fc5297 PDF

    Uploaded by

    Hamilton Miranda

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    176 fc5297 PDF

    Uploaded by

    Hamilton Miranda
    636 views3 pages

    Original Title

    176-fc5297.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    636 views3 pages

    176 fc5297 PDF

    Uploaded by

    Hamilton Miranda

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    File: 176-fc5297 Page 1 of 3

    Fault Code 5297

    Engine/Transmission Match - Out of Calibration

    CODES REASON EFFECT

    Fault Code: 5297 Engine/Transmission Match - Out Possible reduced engine performance.
    PID(P), SID(S): of Calibration. The ECM
    SPN: 747 Calibration is not correct for the
    FMI: 13/13 transmission.
    Lamp: None
    SRT:

    Engine Control Module (ECM)

    Circuit Description:
    Normally, switches, accelerators, and other components are connected to the engine control module (ECM) directly
    through individual wires. Multiplexing allows those same components to be hard wired to an original equipment
    manufacturer (OEM) vehicle electronic control unit (VECU) or transmission electronic control unit (ECU) in the cab.
    Then component values and states from components such as sensors, accelerators, and switches can be transmitted
    from the OEM VECU to the Cummins® ECM over the SAE J1939 data link.
    Messages sent from OEM VECUs or transmission ECUs are received by the Cummins® ECM and used for controlling
    the engine. The Cummins® ECM and OEM VECU(s) must be configured properly, so that proper operation of the
    multiplexed components will occur.

    Component Location:
    The Engine Control Module (ECM) is mounted on the intake manifold side of the engine.
    The Transmission ECU location varies by application, Refer to the OEM service manual for component location.

    Conditions for Running the Diagnostics:


    This diagnostic runs continuously when the keyswitch is in the ON position or when the engine is running.

    © 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
    All Rights Reserved. Last Modified: 09-Aug-2016
    File: 176-fc5297 Page 2 of 3
    Conditions for Setting the Fault Codes:
    The ECM Calibration and the Transmission ECU software are mismatched. The ECM calibration has SmartAdvantage
    or Advanced Dynamic Efficient Powertrain (ADEPT) features enabled, but the transmission ECU software is not
    compatible.

    Action Taken When the Fault Code is Active:


    • The ECM logs the fault code immediately when the diagnostic runs and fails.

    Conditions for Clearing the Fault Code:


    • To validate the repair, perform a key cycle, start the engine and let it idle for 1 minute.
    • The fault code status displayed by INSITE™ electronic service tool will change to INACTIVE immediately after the
    diagnostic runs and passes.
    • The Reset All Faults command in INSITE™ electronic service tool can be used to clear active and inactive faults, as
    well as extinguish the MIL for OBD applications.

    Shop Talk:
    Possible causes for this fault code include:
    • Incorrect or incomplete transmission up fit installation.
    • Missed or timed out J1939 messages.
    • ECM Calibration is not compatible for the transmission ECU software.
    • • ECM updated include SmartAdvantage or Advanced Dynamic Efficient Powertrain (ADEPT) feature and the
    transmission ECU has an older version of software.

    Refer to Troubleshooting Fault Code 5297.

    © 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
    All Rights Reserved. Last Modified: 09-Aug-2016
    File: 176-fc5297 Page 3 of 3

    © 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
    All Rights Reserved. Last Modified: 09-Aug-2016

    You might also like