Control & Signalling Units φ 22mm (fixing)

Characteristics

General Characteristics
Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights &
Illuminated Push Buttons
Reference Standard IEC 947-5-1, EN 60947-5-1, IEC 337-1, UL 508, CSA C-22-2 no 14
Approval , C
&
Protection Degree IP 65 / IP 66 according to IEC 947-1, Nema 4/4X
Pollution Degree 3
Temperature -40oC ~ + 70 oC (Storage)
-25oC ~ +70oC (Working)
Vibration Resistance Mushroom head Push Buttons: 8g, Other Push Buttons & Pilot Lights: 15g (40 to 500 Hz)
confirming to IEC 68-2-6
Shock Resistance Push Buttons : 70g, Mushroom Head Push Buttons: 15g, Selector Switches : 200g
conforming to IEC 68-2-27
Working Position All working positions are allowed
Mechanical Life Push Buttons & Selector Switches 1 million operations, Emergency Mushroom Push Buttons
300,000 operations

Contact Elements Characteristics

Rated Thermal Current Ith 10A

Rated Insulation Voltage U i 500V conforming to IEC 947-1, UL 508 & CSA 22-2 no 14
Insulation Category Group C conforming to NF C 20-040, VDE 0110
Operating Force Push Buttons - 1 ‘NO’ = 10N, 1 ‘NC’ = 8N
Additional contacts - ‘NO’ = +5N, ‘NC’ = +3N
Dielectric Strength 2.5KV for 1 minute
Insulation Resistance 2M Ohm min (500 VDC)
Initial Contact Resistance < 25 milli Ohm
Short Circuits Protection 10A 500V, Cartridge Fuse g1 or N conforming to IEC 337-1
Terminal Reference Conforming to CENELEC EN 50013
Connections On Screw with non loosable plate lamp Sec. 2.5mm 2 max. (14 AWG)
Contact Operation Self Cleaning type, Slow action, Positive Opening
Operation Frequency 3600 Operations per hour
Utilization Category AC 15 (DC 13)
Rated Power DC Supply
Conforming to IEC 947-5-1 Power broken in watts
Load factor : 0.5 for 1 million operations
AC Supply (50/60 Hz) Vo l t a g e 24V 48V 120V
Inductive
Load 65W 48W 40W
AC Ratings, Inductive - NEMA A600
35% Power Factor
Volts Make VA Break VA Continuous Resistive 75% Power
Amperes Amperes carrying factor Make, Break &
Amperes continuous Amperes

120 60 7200 6 720 10 10

240 30 7200 3 720 10 10
480 15 7200 1.5 720 10 10
600 12 7200 1.2 720 10 10

DC Ratings, NEMA Type Q600

Inductive and resistive

Volts Make & Break Continuous

125 55 2.5
250 0.27 2.5
600 0.10 2.5

1
 Control & Signalling Units φ 22mm (fixing)

Non-Illuminated Push Buttons (Type RB2-B)

(Type

(Control Units with chromium plated metal bezel)

Operating Heads for Push Buttons, Spring Return - IP65

Description Knob Size Colour

FLUSH PUSH BUTTON RB2-BA1

SPRING RETURN RB2-BA2
RB2-BA3
RB2-BA4 RB2-BA4
RB2-BA5
RB2-BA6
RB2-BA334
RB2-BA335
PROJECTING PUSH BUTTON RB2-BL1
RB2-BL4
SPRING RETURN RB2-BL2
RB2-BL3
RB2-BL4
RB2-BL5
RB2-BL6
BOOTED PUSH BUTTON RB2-BP1
RB2-BP4
SPRING RETURN RB2-BP2
IP66 RB2-BP3
RB2-BP4
RB2-BP5
RB2-BP6
FLUSH PUSH BUTTON RB2-BA18
RB2-BA48
SPRING RETURN WITH RB2-BA28
TRANSPARENT BOOT RB2-BA38
IP66 RB2-BA48
RB2-BA58
RB2-BA68
MUSHROOM HEAD PUSHBUTTON φ 40mm RB2-BC2
SPRING RETURN RB2-BC3
RB2-BC4
RB2-BS14
RB2-BC5
RB2-BC6
MUSHROOM HEAD PUSHBUTTON φ 30mm RB2-BS44
TURN TO RELEASE φ 40mm RB2-BS54
φ 60mm RB2-BS64
MUSHROOM HEAD PUSHBUTTON φ 40mm RB2-BS14
KEY RELEASE - RAAS KEY NO. 455
RB2-BT43
MUSHROOM HEAD PUSHBUTTON φ 40mm RB2-BT4
PUSH TO STAY AND PULL TO RELEASE (Pre Marked) RB2-BT43

Operating Heads with Black metal bezel

TO ORDER ADD SUFFIX ‘7’ TO ABOVE e.g. RB2-BA334 BECOMES RB2-BA3347

RB2-BA3347 - For legend plates refer page 8 - For accessories refer page 7, 8
- For body / contact assemblies refer page 5 - For complete assemblies refer page 9

2
 Control & Signalling Units φ 22mm (fixing)

Non-Illuminated Double Headed Push Buttons,

Selector Switches & K ey Switches (T ype RB2-B)
(Type
(Control Units with Chromium plated metal bezel)
Operating Heads for Double Headed Push buttons,Spring Return w/o Pilot Light- IP40
Description Marking Colour Reference

2 FLUSH PUSH BUTTONS I RB2-BA87

W/O PILOT LIGHT O
Operating Heads for Double Headed Push buttons, With Pilot Light - IP40
1 FLUSH PUSH BUTTON I RB2BW9
1 PILOT LIGHT (IN CENTRE)
RB2-BA87 1 FLUSH PUSH BUTTON O

Available with assembly unit & with following options :

FILAMENT BULB CLEAR
NEON BULB
LED

Operating Heads for Selector Switches - IP65

Description Ty p e Operator Reference

2 POSITION STAY PUT STANDARD HANDLE RB2-BD2

LONG HANDLE RB2-BJ2
RB2-BW9
SPRING RETURN STANDARD HANDLE RB2-BDR2
TO CENTRE FROM
RIGHT & LEFT LONG HANDLE RB2-BJR2
3 POSITION STAY PUT STANDARD HANDLE RB2-BD3
LONG HANDLE RB2-BJ3
SPRING RETURN STANDARD HANDLE RB2-BDR3
LONG HANDLE RB2-BJR3
1 SPRING RETURN STANDARD HANDLE RB2-BD8
RIGHT TO CENTRE LONG HANDLE RB2-BJ8
1 SPRING RETURN STANDARD HANDLE RB2-BD7
RB2-BD LEFT TO CENTRE LONG HANDLE RB2-BJ7

Operating Heads for Key Switches (Raas Key No. 455) - IP65
Description Type Key removal Reference

2 POSITION STAY PUT LH POSITION RB2-BG2

RH POSITION RB2-BG02
ALL POSITIONS RB2-BG4
1 SPRING RETURN LH POSITION RB2-BG6
RIGHT TO LEFT
3 POSITION STAY PUT CENTRE POSITION RB2-BG3
LH AND RH POSITION RB2-BG5
ALL 3 POSITIONS RB2-BG0
RB2-BJ RH POSITION RB2-BG09
LH POSITION RB2-BG9
STAY PUT TO LEFT CENTRE POSITION RB2-BG8
SPRING RETURN
FROM RIGHT TO
CENTRE
SPRING RETURN CENTRE POSITION RB2-BG7
TO CENTRE FROM
RIGHT & LEFT

Operating Heads with Black metal bezel

TO ORDER ADD SUFFIX ‘7’ TO ABOVE e.g. RB2-BG2 BECOMES RB2-BG27
RB2-BG
- For legend plates refer page 8 - For accessories refer page 7, 8
- For contact assemblies refer page 5 - For complete assemblies refer page 9 & 10

3
 Control & Signalling Units φ 22mm (fixing)

Illuminated Push Buttons & Selector Switches (Type RB2-B)

(Type
(Signalling Units with Chromium plated metal bezel)

Operating Heads for Illuminated Push Buttons - IP65

Description Application Colour Reference

FLUSH PUSH BUTTON FOR INCANDESCENT RB2-BW31

SPRING RETURN BULBS RB2-BW33
RB2-BW34
RB2-BW35

RB2-BW34 RB2-BW36
CLEAR RB2-BW37
PROJECTING PUSH BUTTON FOR INCANDESCENT RB2-BW11
SPRING RETURN BULBS RB2-BW13
RB2-BW14
RB2-BW15
RB2-BW16
CLEAR RB2-BW17
FLUSH PUSH BUTTON FOR LED & RB2-BWL33
SPRING RETURN NEON BULBS* RB2-BWL34
RB2-BW14 RB2-BWL35
RB2-BWL36
PROJECTING PUSH BUTTON FOR LED & RB2-BWL13
SPRING RETURN NEON BULBS* RB2-BWL14
RB2-BWL15
RB2-BWL16
BOOTED TYPE FLUSH FOR INCANDESCENT RB2-BW51
PUSH BUTTON BULBS RB2-BW53
ILLUMINATED TYPE RB2-BW54
RB2-BW55
RB2-BW54 RB2-BW56
CLEAR RB2-BW57

Operating Heads for Illuminated Selector Switches - IP65

Description Ty p e Colour Reference
2 POSITION STAY PUT RB2-BK123
RB2-BK124
RB2-BK125
3 POSITION STAY PUT RB2-BK133
RB2-BK134
RB2-BK124 /
RB2-BK135
RB2-BK134
Operating Heads for Illuminated φ40mm Mushroom Head Operator
Description Ty p e Colour Reference

2 POSITION MOMENTARY RB2-BW44

RB2-BW43
2 POSITION MAINTAINED RB2-BW64
RB2-BW63

Operating Heads with Black metal bezel

TO ORDER ADD SUFFIX ‘7’ TO ABOVE e.g. RB2-BW31 BECOMES RB2-BW317

RB2-BW4 /
RB2-BW6 - ‘*’ Blue colour is not available in Neon
- For legend plates refer page 8
- For accessories refer page 7, 8
- For contact assemblies refer page 5
- For complete assemblies refer page 10

4
 Control & Signalling Units φ 22mm (fixing)

Assemblies for Illuminated, Non-Illuminated

type Push Buttons & Selector Switches (Type RB2-B)

Body assemblies with fixing collar & contact blocks (screw clamp terminal connections)
Description Contact Ty p e Reference

FOR PUSHBUTTONS, NO STANDARD RB2-BZ101

SELECTOR NC STANDARD RB2-BZ102
AND KEY SWITCHES NO+NO STANDARD RB2-BZ103
NC+NC STANDARD RB2-BZ104
NO+NC STANDARD RB2-BZ105
NO GOLD FLASH RB2-BZ1016
RB2-BZ10
NC GOLD FLASH RB2-BZ1026
NO+NO GOLD FLASH RB2-BZ1036
NC+NC GOLD FLASH RB2-BZ1046
NO+NC GOLD FLASH RB2-BZ1056

Additional / replacement Contact Blocks

Description Contact Ty p e Reference

FOR MAKING UP BODY NO STANDARD RB2-BE101

ASSEMBLIES WITH 3, 4, 5
OR MAXIMUM OF 6 CONTACT BLOCKS NC STANDARD RB2-BE102
OR REPLACING 1st OR 2nd CONTACT NO GOLD FLASH RB2-BE1016
NC GOLD FLASH RB2-BE1026
RB2-BE10 Body assemblies for illuminated Push Buttons & Selectors with or w/o Contacts
Description Supply V oltage
Voltage Contact Colour Reference

DIRECT 12V / 24V / 48V /110V /130V NO + NC RB2-BW065

BA 9s FILAMENT (AC/DC) W/O CONTACT RB2-BW06
BULB*
* SUPPLIED BLOCKS
THROUGH RESISTOR 220V NO + NC RB2-BW075
BA 9s, 130V FILAMENT (AC/DC) W/O CONTACT RB2-BW07
BULB SUPPLIED BLOCKS
THROUGH RESISTOR 240V NO + NC RB2-BWD075
& DIODE (AC)
BA 9s 130V W/O CONTACT RB2-BWD07
BULB SUPPLIED BLOCKS
RB2-BW06
DIRECT BA 9s 220V / 380V / 415V NO + NC RB2-BWN0635
NEON BULB SUPPLIED (AC/DC) RB2-BWN0645
RB2-BWN0655
W/O CONTACT RB2-BWN063
BLOCKS RB2-BWN064
RB2-BWN065
WITH INTEGRAL 12V, 24V NO + NC RB2-BWL735
CIRCUIT & CLUSTER 48V, 110V (AC / DC) RB2-BWL745
LED 240V (AC) RB2-BWL755
220V (DC) RB2-BWL765
W/O CONTACT RB2-BWL73
BLOCKS RB2-BWL74
RB2-BWL7
RB2-BWL75
RB2-BWL76
VIA INTEGRAL TRANSFORMER 110V>6V NO + NC RB2-BW035
1.2 VA BA 9s, 6V (AC) W/O CONTACT RB2-BW03
FILAMENT BULB SUPPLIED 220V / 240V>6V NO + NC RB2-BW045
(AC) W/O CONTACT RB2-BW04
- Body assemblies (suitable for bulb 2.6W max.) upto 230V max. available without bulb
- * Bulb rating 12V to 130V, 2.6W (max.)
- Please mention voltage while ordering
- For accessories refer page 7, 8
5 - For complete assemblies refer page 9 & 10
 Control & Signalling Units φ 22mm (fixing)

Pilot Light Heads & Bodies (T ype RB2-B)

(Type

Pilot Light Heads

Description Colour Reference

FOR INCANDESCENT BULBS RB2-BV01

RB2-BV03
RB2-BV04
RB2-BV05
RB2-BV06
RB2-BV04
CLEAR RB2-BV07
HIGH CONTRAST, FOR USE RB2-BVL03
WITH NEON BULBS**
** RB2-BVL04
OR LEDs RB2-BVL05
RB2-BVL06*

Complete Pilot Light Bodies

Supply Supply voltage Colour Reference

DIRECT 12V / 24V / 48V /110V /130V - RB2-BV6

RB2-BV6 BA 9s FILAMENT (AC/DC)
BULB*
* SUPPLIED
THROUGH RESISTOR 220V - RB2-BV7
BA 9s, 130V FILAMENT (AC / DC)
BULB SUPPLIED
THROUGH RESISTOR & 240V - RB2-BVD7
DIODE BA 9s, 130V FILAMENT (AC)
BULB SUPPLIED
VIA INTEGRAL TRANSFORMER 110V>6V - RB2-BV3

RB2-BVN6 1.2 VA BA 9s, 6V (AC)

FILAMENT BULB SUPPLIED 220V / 240V>6V - RB2-BV4
(AC)
DIRECT BA 9s, NEON 220V / 380V / RB2-BVN63
BULB SUPPLIED 415V (AC /DC) RB2-BVN64
RB2-BVN65
INTEGRAL CIRCUIT 12V, 24V, 48V RB2-BVL73
& CLUSTER LED 110V, (AC/DC) RB2-BVL74
220V (DC) RB2-BVL75
240V (AC) RB2-BVL76
RB2-BVL7
Integrated LED Pilot Lamps
Supply Supply voltage Colour Reference

INTEGRATED LED PILOT 12V, 24V, 48V RCB7-IV-71

LAMPS AT 240V AC & 110V, (AC/DC) RCB7-IV-73
220V DC AT 110V, 48V, 220V (DC) RCB7-IV-74
24V, & 12V AC/DC , 240V (AC) RCB7-IV-75
RCB7-IV-74 CIRCUITS RCB7-IV-76
CLEAR RCB7-IV-77
RCB7-IV-78
- Body assemblies (suitable for bulb 2.6W max.) upto 230V max. available without bulb
- * Bulb rating 12V to 130V, 2.6W (max.)
- ** not available in Neon Bulbs
- Please mention voltage while ordering
- For accessories refer page 7, 8
- For legend plates refer page 8
- For complete assemblies refer page 10
- under UL approval

6
 Control & Signalling Units φ 22mm (fixing)

Accessories

Bulbs
Description Vo l t a g e Colour Reference

INCANDESCENT FILAMENT 6V, 12V, 24V, 48V, 130V CLEAR RL1-CF

LAMP
(Different wattage
for various voltages)
RL1-CF NEON BA 9s 220V, 380V, 415V RL1-CN3
RL1-CN4
RL1-CN5

Lenses
Description Colour Reference
SET OF LENSES (ONE RB2-BV001
RL1-CN INNER DIFFUSER & ONE RB2-BV003
OUTER LENS) FOR PILOT RB2-BV004
LAMP HEAD RB2-BV005
RB2-BV006
CLEAR RB2-BV007
SET OF LENS FOR (ONE RB2-BW001
INNER DIFFUSER & ONE RB2-BW003
OUTER LENS) FOR RB2-BW004

RB2-BV004 ILLUMINATING ACTUATOR RB2-BW005

RB2-BW006
CLEAR RB2-BW007
LENSES FOR ILLUMINATING RB2-BWL003
LED & NEON* RB2-BWL004
ACTUATOR (WITHOUT RB2-BWL005
INNER DIFFUSER) RB2-BWL006

Boots
Description Colour Reference
RB2-BP004
SILICON RUBBER RB2-BP001
(FOR RB2-BP) BOOTS RB2-BP002
SUITABLE FOR OIL & HUMID RB2-BP003
CONDITION RB2-BP004
RB2-BP005
RB2-BP006
BOOTS SUITABLE FOR NON- CLEAR RC-S
ILLUMINATING FLUSH PUSHBUTTONS (RB2-BA)
BOOTS SUITABLE FOR ILLUMINATED
RC-S
FLUSH PUSHBUTTONS (RB2-BW) CLEAR RC-L

- ‘ ’ Replace with voltage

- ‘*’ Blue lense for neon type lamp not available

7
 Control & Signalling Units φ 22mm (fixing)

Accessories & Legend Plates

Other Accessories & Tools

Description Reference

FIXING COLLAR RB2-B

RESET PLUNGER RB2-RPX
BULB EXTRACTOR FOR BA 9s BULBS RBF-X13
QUICK CONNECTOR FOR NO / NC CONTACT RB2-QC12
SPARE / REPLACEMENT KEYS FOR KEY RB2-K455

RB2-B OPERATING UNITS (RAAS KEY NO. 455)

PADLOCKING ATTACHMENT RB2-BZ6
(MAKES FLUSH OPERATOR INACCESSIBLE)
PANEL ADPATOR RB2-BZ41
CONVERTS 30mm HOLE TO 22mm HOLE
Legend Plates *
RB2-RPX
Standard TText
ext Reference

RB2-BY2301
START RB2-BY2303
FORWARD RB2-BY2305
UP RB2-BY2307

RB2-QC12 ON RB2-BY2311
OPEN RB2-BY2313
AUTO RB2-BY2315
RESET RB2-BY2323
SLOW RB2-BY2327
AUTO-HAND RB2-BY2364
STOP RB2-BY2304
RB2 - K455 REVERSE RB2-BY2306
DOWN RB2-BY2308
OFF RB2-BY2312
CLOSE RB2-BY2314
HAND RB2-BY2316
40mm

INCH RB2-BY2321
FAST RB2-BY2328
AUTO-O-HAND RB2-BY2385
30mm
HAND OFF AUTO RB2-BY2387
RB2-BY EMERGENCY STOP RB2-BY2330
LOW RB2-BY2333
HIGH RB2-BY2334
HIGH LOW RB2-BY2335
OFF ON RB2-BY2336
STOP START RB2-BY2337
UP DOWN RB2-BY2328
EMERGENCY STOP PLASTIC φ 60mm RB2-PY9330
EMERGENCY STOP PLASTIC φ 90mm RB2-PY8330
EMERGENCY STOP ALUMINIUM φ 60mm RB2-AY9330
RB2-PY9330 EMERGENCY STOP ALUMINIUM φ 90mm RB2-AY8330

- without any text

- * Available in Plastic also. Replace ‘BY’ with ‘PY’

8
Dimensions / Complete Units’ Reference

Control Units φ 22mm fixing

PANEL CUT-OUT
(Thickness: 6mm max.) RB2-BE10 +RB2-B = RB2-BZ10

RB2-BA +RB2-BZ10 =RCB2-BA RB2-BL +RB2-BZ10 =RCB2-BL RB2-BP +RB2-BZ10 =RCB2-BP RB2-BC +RB2-BZ10 =RCB2-BC
RB2-BA334+RB2-BZ10 =RB2-BA334 RB2-BA 8+RB2-BZ10 =RCB2-BA 8 RB2-BS54+RB2-BZ10 =RCB2-BS54
RB2-BT4+RB2-BZ10 =RCB2-BT4

RB2-BS44+RB2-BZ10 =RCB2-BS44 RB2-BS64+RB2-BZ10 =RCB2-BS64 RB2-BS14+RB2-BZ10 =RCB2-BS14

RB2-BG +RB2-BZ10 =RCB2-BG

RB2-BD2+RB2-BZ10 =RCB2-BD2 RB2-BJ2+RB2-BZ10 =RCB2-BJ2 Replace with code for position of Key
RB2-BD3+RB2-BZ10 =RCB2-BD3 RB2-BJ3+RB2-BZ10 =RCB2-BJ3 removal & operation pattern

RB2-BA87+RB2-BZ10 =RCB2-BA87

- Replace with codes for type of contacts (See page 5) & with colour codes (see page 2 & 3)
- For non-illuminated push button heads, selector switches & key switches refer page 2 & 3

9
Dimensions / Complete Units’ Reference

Signalling Unit φ 22mm fixing

RB2-BV0 +RB2-BV6 = RCB2-BV6

RB2-BV0 +RB2-BVN6 = RCB2-BVN6
RB2-BV0 +RB2-BV7 = RCB2-BV7
RCB7-IV-7
RB2-BV0 +RB2-BVD7 = RCB2-BVD7 RB2-BV0 +RB2-BV3 = RCB2-BV3
RB2-BVL0 +RB2-BVL7 = RCB2-BVL7 RB2-BV0 +RB2-BV4 = RCB2-BV4

RB2-BW3 +RB2-BW06+RB2-BE10 = RCB2-BW3 6

RB2-BW3 +RB2-BW07+RB2-BE10 = RCB2-BW3 7
RB2-BW3 +RB2-BWD07+RB2-BE10 = RCB2-BWD3 7
RB2-BWL3 +RB2-BWN06 +RB2-BE10 = RCB2-BWN3 6 RB2-BK12 +RB2-BW06 = RCB2-BK12 6
RB2-BWL3 +RB2-BWL7 +RB2-BE10 = RCB2-BWL3 7 RB2-BK12 +RB2-BW07 = RCB2-BK12 7
RB2-BK12 +RB2-BWD07 = RCB2-
RB2-BW1 +RB2-BW06+RB2-BE10 = RCB2-BW1 6
BKD12 7
RB2-BW5 +RB2-BW06+RB2-BE10 = RCB2-BW5 6 RB2-BW1 +RB2-BW07+RB2-BE10 = RCB2-BW1 7
RB2-BW5 +RB2-BW07+RB2-BE10 = RCB2-BW5 7 RB2-BW1 +RB2-BWD07+RB2-BE10 = RCB2-BWD1 7 RB2-BK13 +RB2-BW06 = RCB2-BK13 6
RB2-BW5 +RB2-BWD07+RB2-BE10 = RCB2-BWD5 7 RB2-BWL1 +RB2-BWN06 +RB2-BE10 = RCB2-BWN3 6 RB2-BK13 +RB2-BW07 = RCB2-BK13 7
RB2-BW5 +RB2-BW06+RB2-BE10 = RCB2-BW5 6 RB2-BWL1 +RB2-BWL7 +RB2-BE10 = RCB2-BWL3 7 RB2-BK13 +RB2-BWD07 = RCB2-BKD13 7

RB2-BW4 +RB2-BW06+RB2-BE10 = RCB2-BW4 6

RB2-BW4 +RB2-BW07+RB2-BE10 = RCB2-BW4 7
RB2-BW4 +RB2-BWD07+RB2-BE10 = RCB2-BWD4 7 RB2-BW9+RB2-BW06+RB2-BE10 = RCB2-BW96
RB2-BW4 +RB2-BWN06 +RB2-BE10 = RCB2-BWN4 6 RB2-BW9+RB2-BW07+RB2-BE10 = RCB2-BW97
RB2-BW4 +RB2-BWL7 +RB2-BE10 = RCB2-BWL4 7 RB2-BW9+RB2-BWD07+RB2-BE10 = RCB2-BWD97
RB2-BW9+RB2-BWN065+RB2-BE10 = RCB2-BWN965
RB2-BW6 +RB2-BW06+RB2-BE10 = RCB2-BW6 6 RB2-BW9+RB2-BWL75+RB2-BE10 = RCB2-BWL975
RB2-BW6 +RB2-BW07+RB2-BE10 = RCB2-BW6 7
RB2-BW6 +RB2-BWD07+RB2-BE10 = RCB2-BWD6 7
RB2-BW6 +RB2-BWN06 +RB2-BE10 = RCB2-BWN6 6
RB2-BW6 +RB2-BWL7 +RB2-BE10 = RCB2-BWL6 7

- Replace ‘ ’ with codes for type of contacts (See page 5) & ‘ ’ with colour codes (see page 4 & 5)
- For illuminated push button heads, illuminated selector switches please refer page 4
- For pilot lamp head please refer page 6 & for double headed push button with pilot lamp please refer page 3

10
 Control Stations

Characteristics

General Characteristics

Products Control Stations

Reference Standard IEC 947-5-1, EN 60947-5-1, IEC 337-1, UL 508, CSA C-22-2 no 14

Approval , C &

Protection Degree IP 65 / IP 66 (as per IEC), NEMA 4 / 4X (special version)

Ambient Temperature -40oC ~ + 70 oC (Storage)

-25oC ~ +70oC (Operation)

Vibration Resistance 15g (40 To 500 Hz) conforming to IEC 68-2-6

Shock Resistance Push Buttons : 70g, Mushroom Head Push Buttons : 15g, Selector Switches : 200g
conforming to IEC 68-2-27

Material and Colour Thermoplastic - grey lid and black base for 1,2,3,4 way, yellow lid & black base for
one way
Aluminium Die Cast - grey lid and dark grey base

Cable Entry Knock-outs provided

Stations for customer assembly

Empty Control Station Enclosures for customer assembly in plastic & metal
Description No. of Holes Colour Reference

CONTROL STATION 1 LID

PLASTIC ENCLOSURE
RC-2P BASE RC-1P
2 LID

BASE RC-2P
3 LID
RC-1M
BASE RC-3P
4 LID

BASE RC-4P
1 LID

BASE RC-1PY
RC-4P CONTROL STATION 1 LID
METAL ENCLOSURE
BASE RC-1M
2 LID

RC-3M BASE RC-2M

3 LID

BASE RC-3M
4 LID

BASE RC-4M
RC-1PY

11
 Control Stations

Stations for customer assembly

Plastic Operating Heads for use with RC P & RC M enclosures - IP65

Description Knob Size Colour Reference

FLUSH PUSH BUTTON RP2-BA1

SPRING RETURN RP2-BA2
RP2-BA3
RP2-BA4
RP2-BA5
RP2-BA6
RP2-BA334
RP2-BA334
RP2-BA335
PROJECTING PUSH BUTTON RP2-BL1
SPRING RETURN RP2-BL2
RP2-BL3
RP2-BL4
RP2-BL5
RP2-BL6
MUSHROOM HEAD PUSH BUTTON RP2-BC2
SPRING RETURN RP2-BC3
φ40mm RP2-BC4
RP2-BC5
RP2-BC6
MUSHROOM HEAD PUSH BUTTON φ30mm RP2-BS44
RP2-BL4
TURN TO RELEASE φ40mm RP2-BS54
φ60mm RP2-BS64
MUSHROOM HEAD PUSHBUTTON φ40mm RP2-BS14

Plastic Selector Heads for use with RC P & RC M enclosures - IP65

Description Ty p e Operator Reference

2 POSITION STAY PUT STANDARD HANDLE RP2-BD2

LONG HANDLE RP2-BJ2
3 POSITION STAY PUT STANDARD HANDLE RP2-BD3
LONG HANDLE RP2-BJ3
SPRING RETURN STANDARD HANDLE RP2-BDR3
LONG HANDLE RP2-BJR3
RP2-BD 3 POSITION 1 SPRING RETURN STANDARD HANDLE RP2-BD8
RIGHT TO CENTRE LONG HANDLE RP2-BJ8
1 SPRING RETURN STANDARD HANDLE RP2-BD7
LEFT TO CENTRE LONG HANDLE RP2-BJ7
Plastic Key Selector Heads for use with RC P & RC M enclosures - IP65
Description Ty p e Key Removal Reference
2 POSITION KEY SWITCH STAY PUT LH POSITION RP2-BG2
(RAAS KEY NO. 455) RH POSITION RP2-BG02
ALL POSITIONS RP2-BG4
3 POSITION STAY PUT CENTRE POSITION RP2-BG3
LH AND RH POSITION RP2-BG5
ALL 3 POSITIONS RP2-BG0
RH POSITION RP2-BG09
LH POSITION RP2-BG9
BOTH SIDE CENTRE POSITION RP2-BG7
RP2-BG SPRING RETURN
TO CENTRE
STAY PUT TO LEFT CENTRE POSITION RP2-BG8
SPRING RETURN
FROM RIGHT TO
CENTRE

12
 Control Stations

Stations for customer assembly

Contact Blocks with RC P enclosures - IP65

Description Contact Ty p e Reference

FOR MAKING UP BODY NO STANDARD RB2-BE101-BP

ASSEMBLIES WITH 3, 4, 5
OR MAXIMUM OF 6 CONTACT BLOCKS NC STANDARD RB2-BE102-BP
OR REPLACING 1st OR 2nd CONTACT NO GOLD FLASH RB2-BE1016-BP
NC GOLD FLASH RB2-BE1026-BP
Metal Operating Heads for use with RC P & RC M enclosures - IP65
RB2-BE BP
Description Knob Size Colour Reference

FLUSH PUSH BUTTON RM2-BA1

SPRING RETURN RM2-BA2
RM2-BA3
RM2-BA4
RM2-BA5
RM2-BA4
RM2-BA6
RM2-BA334
RM2-BA335
PROJECTING PUSH BUTTON RM2-BL1
SPRING RETURN RM2-BL2
RM2-BL3
RM2-BL4
RM2-BA335
RM2-BL5
RM2-BL6
BOOTED PUSH BUTTON RM2-BP1
SPRING RETURN RM2-BP2
IP66 RM2-BP3
RM2-BP4
RM2-BL4 RM2-BP5
RM2-BP6
FLUSH PUSH BUTTON RM2-BA18
SPRING RETURN WITH RM2-BA28
TRANSPARENT BOOT RM2-BA38
IP66 RM2-BA48
RM2-BA58
RM2-BP4 RM2-BA68
MUSHROOM HEAD PUSHBUTTON RM2-BC2
SPRING RETURN RM2-BC3
φ 40mm RM2-BC4
RM2-BC5
RM2-BC6
MUSHROOM HEAD PUSH BUTTON φ 30mm RM2-BS44
TURN TO RELEASE φ 40mm RM2-BS54
RM2-BS54
φ 60mm RM2-BS64
MUSHROOM HEAD PUSHBUTTON φ 40mm RM2-BS14
KEY RELEASE - RAAS KEY NO. 455
MUSHROOM HEAD PUSHBUTTON φ 40mm RM2-BT4
PUSH TO STAY - PULL TO RELEASE (Pre-marked RM2-BT43

Operating Heads with Black metal bezel

TO ORDER ADD SUFFIX ‘7’ TO ABOVE e.g. RM2-BA1 BECOMES RM2-BA17
RM2-BS14

13
 Control Stations

Stations for customer assembly

Metal Selector Heads for use with RC P & RC M enclosures - IP65

Description Ty p e Operator Reference

2 POSITION STAY PUT STANDARD HANDLE RM2-BD2

LONG HANDLE RM2-BJ2
SPRING RETURN STANDARD HANDLE RM2-BDR2
LONG HANDLE RM2-BJR2
3 POSITION STAY PUT STANDARD HANDLE RM2-BD3
LONG HANDLE RM2-BJ3
RM2-BD SPRING RETURN STANDARD HANDLE RM2-BDR3
LONG HANDLE RM2-BJR3
3 POSITION 1 SPRING RETURN STANDARD HANDLE RM2-BD8
RIGHT TO CENTRE LONG HANDLE RM2-BJ8
1 SPRING RETURN STANDARD HANDLE RM2-BD7
LEFT TO CENTRE LONG HANDLE RM2-BJ7
Metal Key Selector Heads for use with RC P & RC M enclosures - IP65
Description Key Removal Key Removal Reference
2 POSITION KEY SWITCH STAY PUT LH POSITION RM2-BG2
(RAAS KEY NO. 455) RH POSITION RM2-BG02
ALL POSITIONS RM2-BG4
RB2-BJ
1 SPRING RETURN LH POSITION RM2-BG6
RIGHT TO LEFT
3 POSITION STAY PUT CENTRE POSITION RM2-BG3
LH AND RM2-BG5
RH POSITION
ALL 3 POSITIONS RM2-BG0
RH POSITION RM2-BG09
LH POSITION RM2-BG9
BOTH SIDE CENTRE POSITION RM2-BG7
SPRING RETURN
TO CENTRE
STAY PUT TO LEFT CENTRE POSITION RM2-BG8
SPRING RETURN
RB2-BG FROM RIGHT TO
CENTRE

Contact Blocks Base Mounted for use with RC M enclosures - IP65

Description Contact Ty p e Reference

Contact Blocks NO STANDARD RB2-BE101-BM

NC STANDARD RB2-BE102-BM
NO GOLD FLASH RB2-BE1016-BM
NC GOLD FLASH RB2-BE1026-BM

Dimensions
Plastic Metal
1 Hole 2 Hole 3 Hole 4 Hole 1 Hole 2 Hole 3 Hole 4 Hole
RB2-BE10 -BM
(inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm) (inch/mm)
H 2.1” / 51 2.1” / 51 2.1” / 51 2.1” / 51 2.1” / 51 2.1” / 51 2.1” / 51 2.1” / 51
W 2.68” / 68 2.68” / 68 2.68” / 68 2.68” / 68 2.68” / 68 2.68” / 68 2.68” / 68 2.68” / 68
L 2.91” / 74 4.09” / 104 5.28” / 134 6.46” / 164 2.91” / 74 4.13” / 105 5.28” / 134 6.46” / 164
W1 2.13” / 54 2.13” / 54 2.13” / 54 2.13” / 54 2.13” / 54 2.13” / 54 2.13” / 54 2.13” / 54
L1 1.5” / 38 2.68” / 68 2.68” / 68 5.04” / 128 1.31” / 46 3.07” / 78 4.25”/ 108 5.43” / 138

14