Cad Module 2

INTEGRATED CAD/CAM ORGANIZATION:
 CAD-CAM means an integrated approach to the creation of CAD database, transfer of

CAD database, to CAM software and creation of programs to handle the work piece using
a robot and machining and inspecting a component using CAM and CMM software
respectively.
 CAD/CAM integration involves integration of 3 D modelling, Analysis and optimization,
2 D drafting and drawing preparation, database management process planning, tool design,
NC programming and inspection.
 The designer creates the geometric model, transfer the model data to the finite analysis
software, and make changes in the model on the basis of analysis.
 By iteration analysis, optimum design is obtained.
 The model data is then transferred to the 2 D drafting software module for creation of shop
drawings if required.
 The model data is also transferred to the CAM software for creation of NC programs and
to several other packages, depending on the requirements.
 Changes from the manufacturing point of view are incorporated into the geometric model.
 Thus in a CAD/CAM environment, the ideal design data has to transfer from one software
to another and also update the database of the design in various work stations.
 CAD/CAM integration is a highly complex problem which includes integration of technical
and management activities of design, manufacturing and computing levels.
PROCESS PLANNING:
 Process planning is that function within a manufacturing facility that establishes which
machining process and process parameters are to be used to convert a work material (blank)
from its initial form (raw material) to a final form defined by an engineering drawing.
 Process planning is a common task in small batch, discrete parts metal working industries.
 The process planning activity can be divided into the following steps:
 Selection of processes and tools
 Selection of machine tools/Manufacturing equipment
 Sequencing the operations
 Grouping of operations
 Selection of work piece holding devices and datum surfaces (set ups)
 Selection of inspection instruments
 Determination of production tolerances
 Determination of the proper cutting conditions
 Determination of the cutting times and non-machining times (setting time, inspection
time) for each operation
 Editing the process sheets.
 All the information determined by the process planning function is recorded on a sheet
called process plan.
 The process plan is frequently called an operation sheet, route sheet or operation planning
sheet. This provides the instructions for the production of the part.
 It contains the operation sequence, processes, Process parameters and machine tools used.
 In conventional production system, a process plan is created by a process planner.
 It requires a significant amount of time and expertise to determine an optimal routing for
each new part design. However, individual engineers will have their own opinions about
what constitutes the best routing.
 Accordingly there are differences among the operation sequences developed by various
planners.
 Efficient process planning requires the service of experienced process planners. Because of
the problems encountered with manual process planning, attempts have been made in recent
years to capture the logic, judgment and experience required for this important function
and incorporates them into computer programmes.
 Based on the features of a given part, the program automatically generates the sequence of
manufacturing operations. The process planning software provides the opportunity to
generate production routings which are rational, consistent and perhaps even optimal.
 It has the following advantages.
 Reduces the skill required of a planner.
 Reduces the process planning time.
 Reduces the process planning and manufacturing cost.
 Creates more consistent plans.
 Produces more accurate plans.
 Increases productivity.
 The current approaches for computer aided process planning can be classified into two
groups:
1. Variant
2. Generative

Cad Module 2

Uploaded by

Copyright:

Available Formats

Cad Module 2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cad Module 2

Uploaded by

Copyright:

Available Formats

INTEGRATED CAD/CAM ORGANIZATION:

 CAD-CAM means an integrated approach to the creation of CAD database, transfer of

You might also like