3shape PC

3Shape
PC Catalog
V.1.3 March 2017

How to use this PC catalog
The importance of the PC

The PC is an important part of the overall 3Shape system. It is the engine on which the software is run, and consequently the software puts
some requirements on the PC. Selecting the correct PC will ensure a good user experience and effective workflow for the user. This
document outlines how to determine which PC to use for a given 3Shape system or combination of systems.
Selecting a PC
First, identify which PCs are capable of running the required combination of 3shape products in the section ‘List of specific PCs’. Then,
select one of these PCs.
If the system does not include TRIOS scanning, it is also possible to select a PC that complies with the specifications listed in the section
‘Minimum PC requirements for 3Shape software packages (Ortho /Implant Studio /Practice lab /Dental System)’.
Changes in this version of the PC catalog

Changes include:
 PCs updated (new specs): Dell XPS15, HP Z240 config. 1, HP Z240 config. 3, Dell Alienware 15”, Dell Alienware 17”
This document is subject to change without notice.
Contents
How to use this PC catalog ........................................................................................................................................................................2

List of specific PCs ......................................................................................................................................................................................3
Minimum PC requirements for 3Shape software packages (Ortho /Implant Studio /Practice lab /Dental System) .................................8
Network speed requirements ....................................................................................................................................................................9
2
List of specific PCs
Use the table below to select a PC that will work on a specific combination of 3Shape products.
For ordering information, locate the item number in the column ‘May be delivered by 3Shape’.
3Shape software May be delivered by

TRIOS® TRIOS® Ortho Implant Dental 3Shape
Practice System Studio System reseller
lab (Note 3)
(Note 6)
Dell XPS 15
ProSupport: 3 Years Onsite service
Display: 15.6 inch UHD (3840 x 2160)

Processor: Intel® Core™ i7-7700HQ
Memory: 32 GB (or more) DDR4, 2400 MHz (or more)
Disk: 1TB SSD (or more)
Graphics card: NVIDIA® GeForce® GTX 1050 (4 GB)
Note 4) Note 4,5) Item No:
Keyboard: Regional, depending on availability 80602-
Operating system: Windows 8.1 Pro or Windows 10 Pro (1) 742
Dim.: 357mm (14”) x 235mm (9.3”) x 17mm (0.7”)
Weight: 2.0 Kg (4.5 lbs.)
Dell Alienware 15
ProSupport 3 Years Onsite service
Display: 15,6" FHD (1920 x 1080) (or more)

Processor: Intel® Core™ i7-6700HQ or i7-6820HK or i7-7700HQ
Memory: 16GB (or more) DDR4, 2400 MHz (or more)
Disk: 1TB SSD boot disk (or more) (additional spinning disk optional)
Graphics card: NVIDIA® GeForce® GTX 1060M (6GB) or GTX 1070 (8GB)
80602-
or GTX 1080
Keyboard: Regional, depending on availability
486
Operating system: Windows 8.1 Pro or Windows 10 Pro (1)
Dim.: 389mm (15.3”) x 405mm (12.0") x 25mm (1.0”)
Dell Alienware 17
ProSupport:3 Years Onsite service
Display: 17.3" FHD (1920 x 1080) (or more)

Processor: Intel® Core™ i7-6700HQ or i7-6820HK or i7-7700HQ
Memory: 16GB (or more) DDR4, 2400 MHz (or more)
Disk: 1TB SSD boot disk (or more) (additional spinning disk optional)
Graphics card: NVIDIA® GeForce® GTX 1060M (6GB) or GTX 1070
80602-
(8GB) or GTX 1080
493
Dim.: 332mm (13.1") x 424mm (16.7”) x 30mm (1.2”)
3
lab (Note 3)
(Note 6)
Lenovo P50
3 Years Onsite service
Display: 15.6 inch (1920x1080) (or more)

Processor: Intel Core i7-6820HQ
Memory: 16GB (or more) DDR4 2133MHz
Disk: 512GB SSD (or more) Item No:
Graphics card: NVIDIA® Quadro M2000M with 4 GB GDDR5 80602-
Keyboard: Regional, depending on availability 472
Dimensions: 377 mm (14.9”) x 252mm (9.9”) x 25mm (1.0”)
HP Zbook 17 G3 Workstation
Display: 17.3” FHD (1920x1080) (or more)

Processor: Intel Core i7-6820HQ Not
Memory: 16GB (or more) DDR4, 2133MHz available
Disk: 512GB SSD (or more)
Graphics card: NVIDIA® Quadro® M4000M (4GB)
Dim.: 420mm (16.5”) x 280mm (11.0”) x 30mm (1.1”)
Apple 15" MacBook Pro

Apple warranty
Display: 15.4" Retina (2880 x 1800)

Processor: Intel Core i7 2.7GHz (or more), Turbo Boost up to 3.6GHz
Memory: 16 GB (or more) DDR3L, 2133 MHz (or more) Not
Disk:1TB SSD (or more) available
Graphics card: AMD Radeon Pro 460 (4 GB)
Operating system: Windows 7 Ultimate/Windows 8 Pro/Windows 10 Pro
(1), 64 bit via bootcamp (2)
Dim.: 349mm (13.8”) x 241mm (9.5”) x 16mm (0.6”)
4
lab (Note 3)
(Note 6)
Dell Alienware Area-51

Regular warranty
Display: 1920 x1080 resolution minimum (monitor not incl.)

Processor: Intel Core i7-5820K (3.3 GHz)
Memory: 16 GB (or more) DDR4, 2133MHz
Disk: 512 GB SSD (or more) + 4 TB HDD 7200 rpm (optional)
20000-
Graphics card: NVIDIA GeForce GTX 980 (4GB) or GTX1080 (8GB)
103
Dim.: 273mm (10.7") x 639mm (25.2") x 569mm (22.4")
HP Z240, Config. 1
Display: 1920 x 1080 resolution minimum (monitor not incl.)

Processor: Intel Core i7-6700 (3.4 GHz)
Disk: 1TB SSD disk (or more) Note 4) Note 4) Item No:
Graphics Card: NVIDIA GeForce GTX 1060 (6GB) 20000-
Dim.: 170mm (6.7”) x 442mm (17.4”) x 399mm (15.7”)
HP Z240, Config. 2

Not
available
Disk: 512GB SSD disk (or more)
Graphics Card: NVIDIA Quadro M4000 (8GB)
Dim.: 170mm (6.7”) x 442mm (17.4”) x 399mm (15.7”)
5
lab (Note 3)
(Note 6)
HP Z240, Config. 3

Disk: 1TB 7200RPM disk (or more)
Note 4) Note 4) Item No:
Graphics Card: NVIDIA GeForce GTX 1050ti (4GB) 20000-
Dim.: 170mm (6.7”) x 442mm (17.4”) x 399mm (15.7”)
HP Z240, Config. 4

Not
available
Note 4) Note 4)
Disk: 512GB SSD disk (or more)
Graphics Card: NVIDIA GeForce GTX 1070 (8GB)
Dim.: 170mm (6.7”) x 442mm (17.4”) x 399mm (15.7”)
HP 800 G2
Display: 1920 x1080 resolution minimum (monitor not incl.)
Disk: 1TB 7200RPM disk (or more)
Graphics card: NVIDIA GeForce GT 740 (2 GB GDDR5, 384 shader cores) Note 4) Note 4) Item No:
Extra USB card: 4x USB 3.0 20000-
Dim.: 100mm (3.95") x 378mm (14.9") x 338mm (13.3")
Note 1)
TRIOS® will in general work fine also on Windows Home edition. However, there are some benefits of using the Pro version, compared to the Home version,
including: Pro version will enable the PC to be part of a corporate domain, whereas the Home version will not. For Win10 , only the PRO version will allow full
control of Windows updates. For full information please refer to the ‘PC setup guide for TRIOS®’ document.
Note 2)
Apple computers requires more setup, as windows need to be installed (requires Bootcamp, see instructions on Apple’s website). All specifications are subject to
change without notice.
Note 3)
Depending on local availability. Not all models may be available from the PC manufacturer in all regions. Not all models may be available from each reseller.
Note 4)
Software (Ortho Analyzer or Dental System) will not be installed from factory. Reseller must install the software.
Note 5)
PC is approved for Dental System design station only. For Dental System scanning, use the HP Z240 or the HP800 G2.
Note 6)
Only resellers may order PCs directly from 3Shape. End-user must order from resellers.
6
All systems including a TRIOS® must be delivered to end users with a configured PC
3Shape provides fully functional computer with TRIOS® software installed. Alternatively, Reseller purchases, configures and delivers fully functional
computer with TRIOS® software installed. Please note! Distributor may be required to exchange some parts (e.g. RAM, disk, etc.), depending on the
available configurations by the computer supplier. All specifications are subject to change without notice.
PC setup guide
The user experience (especially when using TRIOS®) depends to a very large degree on the proper configuration of the PC used. To ensure proper setup
of the PCs, 3Shape provides a document intended for distributors of TRIOS®. It describes all steps required to set up a new PC to enable fast and accurate
scans with the TRIOS® POD systems (cart systems are delivered fully configured). The document may be found on the 3Shape support site. The document is
subject to change.
7
Minimum PC requirements for 3Shape software packages (Ortho /Implant
Studio /Practice lab /Dental System)
Scope
The list below is valid for setups that will not drive a TRIOS® scanner. Setups that do include TRIOS® scanning must employ one of the PCs from the ’List of
specific PCs’. Note that the list below will also cover TRIOS® practice lab, when the scanning itself is performed at a different PC.
Legend Ortho Implant Practice lab Dental

: Sufficient System Studio (Scan on System (3)
separate PC)
: Recommended for improved performance (optional)
Intel Core i5
Processor
Intel Core i7 or equivalent
4GB
Memory (RAM) 8GB (1)
16GB (1)
250GB (conventional or SSD)
Disk 500GB (conventional or SSD) (2)
1TB (conventional or SSD) (2) (2)
512MB NVIDIA GeForce, DirectX 10 /11
Graphics card 1GB NVIDIA GeForce, DirectX 10/11
2GB NVIDIA GeForce, DirectX 10/11
Windows 8 Home (64bit) (4) (4) (4) (4)
Windows 8.1 Home (64bit) (4) (4) (4) (4)
Windows 10 Home (64bit) (4) (4) (4) (4)
Windows 7 PRO (32bit)

Operating system
Windows 8.1 PRO (64bit)
1280x1024
Monitor resolution 1920x1080
1920x1200
Network Wi-Fi or wired, internet connection
Mouse With wheel button (5) (5) (5)
Notes
1) 8GB recommended. For simultaneous scanning and modeling of large cases, 16GB RAM is recommended
2) 1TB recommended if used as a stand-alone system or a server with the order folder
3) Specs listed applies to Dental System design station only. For Dental System scanning use the HP 800 G2 (for D500, D700, D710, D750, D800 and
D810) or the HPZ240 (for D850, D900, D900L, D1000 and D2000). However, for most scanners a PC that fulfills the requirements for Dental
System will also be usable for scanning. For D250 scanners the PC must have a serial port, please contact your reseller for details on new PCs for
D250 scanners.
4) Pro version will enable the PC to be part of a corporate domain, whereas the Home version will not
5) 3DConnexion Space Mouse Pro recommended for improved performance
8
Network speed requirements
The speed of the Ethernet is important as it will impact the user experience. The faster network, the smoother user experience.
Speeds stated below are the effective speeds obtainable on the network (a 100Mbit network may not yield 100Mbit/s in real life).
Legend TRIOS® Ortho Implant Practice lab Dental

: Sufficient System Studio (Scan on System
separate
: Recommended for improved performance (optional)
PC)
1 Mbit/s
Upload 2 Mbit/s
to Internet
5 Mbit/s
(Case communication with
external partners) 10 Mbit/s
20 Mbit/s
1 Mbit/s
Download 2 Mbit/s
from Internet
5 Mbit/s
(Case communication with
external partners) 10 Mbit/s
20 Mbit/s
20 Mbit/s
50 Mbit/s
Internal
100 Mbit/s
(Communication in-house)
200Mbit/s
500 Mbit/s
Notes
 The faster connection the faster sending and receive of an order. A typical TRIOS® order of 30Mb will take approx. 30 seconds to transmit on a
10Mbit/s line.
 The effective upload/download speed may be tested using free tools available on the internet, e.g. www.speedtest.net

3shape PC

Uploaded by

Copyright:

Available Formats

3shape PC

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3shape PC

Uploaded by

Copyright:

Available Formats

3Shape

V.1.3 March 2017

The importance of the PC

Changes in this version of the PC catalog

This document is subject to change without notice.

How to use this PC catalog ........................................................................................................................................................................2

3Shape software May be delivered by

Display: 15.6 inch UHD (3840 x 2160)

Display: 15,6" FHD (1920 x 1080) (or more)

Display: 17.3" FHD (1920 x 1080) (or more)

Display: 15.6 inch (1920x1080) (or more)

Display: 17.3” FHD (1920x1080) (or more)

Apple 15" MacBook Pro

Display: 15.4" Retina (2880 x 1800)

Dell Alienware Area-51

Display: 1920 x1080 resolution minimum (monitor not incl.)

Display: 1920 x 1080 resolution minimum (monitor not incl.)

Display: 1920 x 1080 resolution minimum (monitor not incl.)

Display: 1920 x 1080 resolution minimum (monitor not incl.)

Display: 1920 x 1080 resolution minimum (monitor not incl.)

Legend Ortho Implant Practice lab Dental

Memory (RAM) 8GB (1)

250GB (conventional or SSD)

Disk 500GB (conventional or SSD) (2)

1TB (conventional or SSD) (2) (2)

512MB NVIDIA GeForce, DirectX 10 /11

Graphics card 1GB NVIDIA GeForce, DirectX 10/11

2GB NVIDIA GeForce, DirectX 10/11

Windows 8 Home (64bit) (4) (4) (4) (4)

Windows 8.1 Home (64bit) (4) (4) (4) (4)

Windows 10 Home (64bit) (4) (4) (4) (4)

Windows 7 PRO (32bit)

Windows 8 PRO (64bit)

Windows 8.1 PRO (64bit)

Windows 10 PRO (64bit)

Monitor resolution 1920x1080

Network Wi-Fi or wired, internet connection

Mouse With wheel button (5) (5) (5)

Legend TRIOS® Ortho Implant Practice lab Dental

You might also like