Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 163 views

    D1.5M D1.5 2015 AMD1 Form O 2 Fillable

    Uploaded by

    vikasphopale1
    This document is a welding procedure specification (WPS) that provides details for welding, including: - The welding process, position, joint design, base and filler metals - Electrical characteristics such as current type and stick out - Technique details like stringer beads and interpass cleaning - Preheat and postweld heat treatment requirements - Shielding gas composition and flow rate - Calculated heat input values - Weld pass details listing filler metal, current, voltage, and travel speed

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    D1.5M D1.5 2015 AMD1 Form O 2 Fillable

    Uploaded by

    vikasphopale1
    163 views1 page
    This document is a welding procedure specification (WPS) that provides details for welding, including: - The welding process, position, joint design, base and filler metals - Electrical characteristics such as current type and stick out - Technique details like stringer beads and interpass cleaning - Preheat and postweld heat treatment requirements - Shielding gas composition and flow rate - Calculated heat input values - Weld pass details listing filler metal, current, voltage, and travel speed

    Original Description:

    WPS

    Original Title

    D1.5M-D1.5-2015-AMD1-Form-O-2-Fillable (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a welding procedure specification (WPS) that provides details for welding, including: - The welding process, position, joint design, base and filler metals - Electrical characteristics such as current type and stick out - Technique details like stringer beads and interpass cleaning - Preheat and postweld heat treatment requirements - Shielding gas composition and flow rate - Calculated heat input values - Weld pass details listing filler metal, current, voltage, and travel speed

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    163 views1 page

    D1.5M D1.5 2015 AMD1 Form O 2 Fillable

    Uploaded by

    vikasphopale1
    This document is a welding procedure specification (WPS) that provides details for welding, including: - The welding process, position, joint design, base and filler metals - Electrical characteristics such as current type and stick out - Technique details like stringer beads and interpass cleaning - Preheat and postweld heat treatment requirements - Shielding gas composition and flow rate - Calculated heat input values - Weld pass details listing filler metal, current, voltage, and travel speed

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    AASHTO/AWS D1.5M/D1.

    5:2015-AMD1 ANNEX O

    WELDING PROCEDURE SPECIFICATION (WPS)


    PREQUALIFIED QUALIFIED BY TESTING
    or PROCEDURE QUALIFICATION RECORDS (PQR) Yes
    AASHTO/AWS D1.5 Qualification Type 5.12.1 – 5.12.2 – 5.12.4
    Contractor/ Identification ___________________________________
    Organization __________________________________ Revision _______ Date __________ By ____________
    Welding Process(es) ____________________________ Authorized by __________________ Date __________
    Type: Manual Semiautomatic Supporting PQR No.(s) __________________________
    Mechanized Automatic
    POSITION
    Tandem Parallel
    Position of Groove ______________ Fillet __________
    Vertical Progression: Up Down
    JOINT DESIGN USED ELECTRICAL CHARACTERISTICS
    Single Double Weld Transfer Mode (GMAW): Globular Spray
    Backing: Yes No Material _______________ Current: AC DCEP DCEN Pulsed
    Root Opening ______ Root Face Dimension ________
    Electrical Stick Out ______________________________
    Groove Angle ___________ Radius (J–U) _________
    Other ________________________________________
    Backgouging: Yes No Method ____________
    Root Treatment ________________________________ TECHNIQUE
    Stringer or Weave Bead __________________________
    BASE METALS Multi-pass or Single Pass (per side)_________________
    Material Spec. _________________________________ Number of Electrodes ___________________________
    Type or Grade _________________________________ Electrode Spacing: Longitudinal __________________
    Thickness: Groove ____________ Fillet __________ Lateral _______________________ Angle__________
    Diameter (Pipe) ________________________________ Interpass Cleaning ______________________________
    PREHEAT
    FILLER METALS Preheat Temp., Min. _____________________________
    AWS Specification______________________________ Interpass Temp., Min. ____________________________
    AWS Classification _____________________________ Interpass Temp., Max. ___________________________
    Manufacturer Trade Name________________________
    POSTWELD HEAT TREATMENT
    Temp. _________________ Hold Time_____________
    SHIELDING
    Heating/Cooling Rate ____________________________
    Flux _________ Mfg. Trade Name ________________
    Electrode-Flux (Class)___________________________ HEAT INPUT
    Gas Composition ______________________________ Calculated Heat Input Value: kJ/in kJ/mm
    Flow Rate ______________ Gas Cup Size _________ Max. Heat Input _________ Min. Heat Input_________

    WELDING PROCEDURE
    Filler
    Pass or Metals Current
    Weld Type & Amps or Wire Travel
    Layer(s) Process Diam. Polarity Feed Speed Volts Speed Joint Details

    Form O-2

    Form O-2—Sample Welding Procedure Specification

    281

    You might also like