Petersenplgpckrcats PDF

Cover
421 Wheeler Avenue, P.O. Box 340, Fredonia, Wisconsin 53021-0340, U.S.A
Phone 800-926-1926 or 262-692-3100 Fax: 800-669-1434 or 262-692-2418
Table of Contents
Pipe Plugs, Inflatable, High Expansion, MULTI-FLEX®, Pipe Sizes: 1" and Larger, 113 Series 1
Pipe Plugs, Inflatable, Oil Resistant, HD, MULTI-FLEX®, w/o By-Pass, Pipe Sizes: 1 3/4" and Larger, 124 Series 2
Inflatable Line Stop™ Pipe Plugs, High Pressure MULTI-FLEX®, Pipe Sizes: 2" and Larger, 129 Series 3
Inflatable Line Stop™ Pipe Plugs, High Pressure MULTI-FLEX®, Pipe Sizes: 2" and Larger, 129 Series Continued 4
Pipe Plugs, Inflatable, Oil Resistant, HD, MULTI-FLEX®, with By-Pass, Pipe Sizes: 4" and Larger, 125 Series 7
Inflatable Line Stop™ Block And Bleed Plugs, High Pressure, Pipe Sizes: 12" and Larger, 129BB Series 8
Pipe Plugs, Inflatable, Oil Resistant, MULTI-FLEX® w/o By-Pass, Pipe Sizes: 1.7" and Larger, 114 Series 10
Pipe Plugs, Inflatable, Oil Resistant, MULTI-FLEX® with By-Pass, Pipe Sizes: 2.5" and Larger, 115 Series 11
Inflatable Line Stop™ Plug Insertion Systems, Pipe Sizes: 2” and Larger, 939 Series 12
Completion Plugs, 150-Series 13
Hot Tap Sleeves, 910-4 Series 14
Annular Seals, Inflatable MULTI-FLEX®, 111-Series 15
Bladders, Custom Inflatable 16
Duct Balloons and Seals, Custom Inflatable 17
Pipe Plugs, Inflatable, Plumber Style Test, Rubber With & Without 18
Pipe Plugs, Inflatable, Plumber Style Test, Rubber Molded, Pipe Sizes: 0.75" to 18.25", 130-0 Series 19
Pipe Plugs, Inflatable, Plumber Style Test, Rubber Molded, Pipe Sizes: 0.75" to 18.25", 130-0 Series
(Continued) 20
Pipe Plugs, Inflatable, Rigid Core By-Pass MULTI-FLEX®, Pipe Sizes: 1 3/4" to 12", 126 Series 21
Pipe Plugs, Inflatable, Remote Placement, Pipe Sizes: 6” to 18”, 130-7 Series 22
Pipe Plugs, Inflatable, Two-Stage Long Kevlar® Reinforced Molded Rubber Plugs, 23
Pipe Plugs, Inflatable, Long Test-Ball, Pipe Sizes: 2” to 6”, 130-3 Series 24
Pipe Plugs, Inflatable, High Dilation, 131 Series 25
Pipe Plugs, Inflatable, Municipal Style Test, Kevlar® Reinforced Rubber w/o By-Pass, 26
Pipe Plugs, Inflatable, Leak Detector Type, Pipe Sizes: 5.5" to 96", 130-4 Series 27
Pipe Plugs, Inflatable, Leak Detector Type, Pipe Sizes: 5.5" to 96", 130-4 Series (Continued) 28
Pipe Plugs, Inflatable, Large Flow-Through Bypass, Pipe Sizes: 5.70" to 24.98", 130-6 Series 29
Pipe Plugs, Inflatable, Large Flow-Through Bypass, Pipe Sizes: 5.70" to 24.98", 130-6 Series (Continued) 30
Pipe Plugs, Inflatable, Municipal Style, Pipe Sizes: 1.5" to 96", 130-2 Series 31
Pipe Plugs, Inflatable, Municipal Style, Pipe Sizes: 1.5" to 96", 130-2 Series (Continued) 32
Pipe Plugs, Inflatable, Municipal Style, Pipe Sizes: 1.5" to 96", 130-2 Series (Continued) 33
Pipe Plugs, Inflatable, Municipal Style Test, Kevlar® Reinforced Rubber With By-Pass, 34
Pipe Plugs, Inflatable, Municipal Style Kevlar® Reinforced Rubber With By-Pass, 35
Pipe Plugs, Inflatable, Low Pressure Gas Type, Pipe Sizes: 1" to 48", 154 Series 36
Pipe Plugs, Inflatable, Stack Test Rubber, Pipe Sizes: 1.5" to 6", 130-1 Series 37
Pipe Plugs, Inflatable, Pillow Style Muni-Balls, Pipe Sizes: 15” to 66”, 130-9 Series 38
Pipe Plugs, Inflatable, Pillow Style Muni-Balls, Pipe Sizes: 15” to 66”, 130-9 Series (Continued) 39
Pipe Plugs, Inflatable, Pillow Type Municipal Style Kevlar® Reinforced With & W/) By-Pass, 40
Packer Carriers, Inflatable, MULTI-FLEX®, Pipe Sizes: 3 1/2" and Larger, 118 / 119 Series 41
Packer Carriers, Inflatable MULTI-FLEX®, Pipe Sizes: 3 1/2" and Larger, 118 / 119 Series (Continued) 42
Packer Carriers, Inflatable Tee Type Lateral Joint MULTI-FLEX®, Pipe Sizes: 4" to 24", 116 Series 43
Packer Carriers, Inflatable Point Repair, Pipe Sizes: 4" to 12", 130-5 Series 44
Test Equipment, Leak Detector Pressure Accessories, 924-1304 Series 45
Test Equipment, Leak Detector Pressure Testing Panel, 924-1304 Series (Continued) 46
Test Equipment, Leak Detector Pressure Hoses, 924-1304 Series (Continued) 47
Pipe Plugs/Packers, Inflatable, Accessories 48
Pipe Plugs/Packers, Inflatable, Accessories, Continued 49
Pipe Plugs, Mechanical, Push & Pull, Spigot & Bell End, Pipe Sizes: 6" to 60", 140-0 Series 52
Pipe Plugs, Mechanical, Push & Pull, Spigot & Bell End, Pipe Sizes: 6" to 60", 140-0 Series (Continued) 53
Test Caps, Pipe Sizes: 1.5" to 6", 142-9 Series 54
Pipe Plugs, Mechanical, Hand Tightening Nylon Test & Cleanout, Pipe Sizes: 1 1/2" to 4", 143-0 Series 55
Pipe Plugs, Mechanical, Hand Tightening Nylon Test, Pipe Sizes: 3 3/4" to 19", 142-0 Series 56
Pipe Plugs, Mechanical, Hand Tightening Low Pressure Aluminum Body 57
Pipe Plugs, Mechanical, Hand Tightening Low Pressure Nylon, Pipe Sizes: 1/2" to 6", 144-0 Series 58
Pipe Plugs, Mechanical, Flush Mounted and Beveled Finishing Plate, 59
Pipe Plugs, Mechanical, Monitor Well, Pipe Sizes: 1" to 8", 142-8 Series 60
Pipe Plugs, Mechanical, Lever Type Expandable Rubber, Pipe Sizes: 3/8" to 4", 143-1 Series 61
Pipe Plugs, Mechanical, T-Handle Expandable Rubber Plugs, Pipe Sizes: 1/2" to 5", 143-2 Series 62
Pipe Plugs, Mechanical, Wing Nut, End of Pipe & Water Line Stub, 63
Pipe Plugs, Mechanical, T-Handle Aluminum Test With & Without By-Pass, 64
Pipe Plugs, Mechanical, Clean-Out and Hub-Fit Gripper® Type, Pipe Sizes: 2.2" to 4.8", 143-8 Series 65
Pipe Plugs, Mechanical, Reinforced ABS Wing Nut, Pipe Sizes: 1.5" to 8", 143-9 Series 66
Pipe Plugs, Mechanical, High Impact ABS Wing Nut, Pipe Sizes: 1.5" to 4", 144-1 Series 67
Pipe Plugs, Mechanical, Remote Placement Expander, Pipe Sizes: 0.57" to 2", 148-3 Series 68
Pipe Plugs, Mechanical, Hand Tightening Aluminum Body Test With & Without By-Pass, 69
Pipe Plugs, Mechanical, EZ-Swet Line Stopper, Pipe Sizes: 1/2" to 4", 148-0 Series 70
Pipe Plugs, Mechanical, High Pressure Test, Pipe Sizes: 2.469" to 144", 145-9 Series 71
Pipe Plugs, Mechanical, Bolt Type Medium Pressure Test With By-Pass, 72
Pipe Plugs, Mechanical, Bolt Type Medium Pressure Test With By-Pass, 73
Pipe Plugs, Mechanical, Bolt Type High Pressure Test, Pipe Sizes: .53" to 24", 147 Series 74
Pipe Plugs, Mechanical, High Lift Flange Weld Test, Pipe Sizes: 3/4" to 24", 151 Series 75
Pipe Plugs, Mechanical, High Lift Flange Weld Test, Pipe Sizes: 3/4" to 24", 151 Series (Continued) 76
Pipe Plugs, Redwood Tapered, Pipe Sizes: ½” to 8” 140-1 Series 77
Pipeline Joint Testers, Pipe Sizes: 24” to 120”, 145-8 Series 78
Lift Bags, Inflatable 145 or 116 PSI High Pressure HD Duty Bags and Accessories, 79
Lift Bags, Inflatable High Pressure Flat Form, Sizes: 22" to 36", 161-0 Series 81
Lift Bags, Inflatable High Pressure Flat Form, Accessories, 161-0 Series 82
Lift Cylinders, Inflatable MULTI-FLEX®, Sizes: 1" and Larger, 161-9 Series 83
Temperature & Pressure Plugs, Pete's Plugs II, Pipe Sizes: 1/8" to 1/2", 311 Series 84
Temperature & Pressure Plugs, Pipe Sizes: 1/4" to 1/2", 310-Series 85
Accessories For Pressure & Temperature Plugs 310 and 311 Series 86
Flushers, Drain Jet™ Hydraulic Drain Flushers, Pipe Sizes: 1-3/8" to 6", 100-102 Series 87
Cleaning Balls, Pipeline, Pipe Sizes: 5.87" to 18.25", 109 Series 88
Flushers, Municipal Style Hydraulic Pipeline Flushers, Pipe Sizes: 3" to 12", 107 Series 89
Hot Tappers, Manual, Pipe Sizes: 1/2" to 6", 261 Series 90
Hot Tappers, Pneumatic, Pipe Sizes: 1/2" to 6", 262 Series 91
Deflection Gauges, Pipe Sizes: 4" to 27", 938-96 Series 92
Deflection Gauges, Pipe Sizes: 4" to 27", 938-96 Series (Continued) 93
Pumps, Portable, Medium Pressure Hydrostatic Test, 938-93 Series 95
Pumps, Portable, High Hydrostatic Pressure Test, 938-93 Series (Continued) 96
Pumps, Portable, High Hydrostatic Pressure Test, 938-9 Series 97
Manhole Vacuum Testers & Accessories, Pipe Sizes: 20" to 42", 938-7 Series 98
Manhole Vacuum Testers & Accessories, Pipe Sizes: 20" to 42", 938-7 Series (Continued) 99
Smoke Testers, 938-95 Series 100
Stringers and Ventilators, 938-94 Series 101
Safety Gag, Mechanical Plugs, Pipe Sizes: 0.75" to 24", 936-5 Series 102
Product & Service Warranty, Terms & Conditions 103
Alphabetical Index 105
Pipe Plugs, Inflatable, High Expansion, MULTI-FLEX®, Pipe Sizes: 1" and Larger, 113 Series
Smallest deflated size to install through tiny openings

Higher pressure and more robust that typical "Gas Plugs
May not provide a perfect seal for pipeline testing without customization
Pipe Diameter Maximum **Pipeline Inflation Tap Hole Length to Neck

Shpg Unit
Port* Size Neck Item
Length
Maximum Minimum Inflation Max. Head Wt Price
Number
Each
in mm in mm psig bar ft m in npt Location in mm in mm in mm lbs
2 51 1 25.4 30 2.1 35 11 0 On One Side 1 25.4 3.5 89 1 25 2 113-002 $122
3 76 1 25.4 30 2.1 35 11 Tire valve On One Side 1 25.4 4.5 114 2 51 2 113-003 $122
4 102 1.25 31.8 30 2.1 35 11 Tire valve On One Side 1.25 5 6 152 2 51 2 113-004 $146
5 152 1.65 41.9 30 2.1 35 11 Tire valve On One Side 1.65 41.9 8.25 222 2 51 2 113-006 $181
8 203 2 50.8 30 2.1 35 11 Tire valve On One Side 2 50.8 9 229 3 76 3 113-008 $224
10 254 2 50.8 30 2.1 35 11 Tire valve On One Side 2 50.8 12 305 3 76 3 113-010 $266
12 305 2.5 63.5 25 1.7 29 9 Tire valve On One Side 2.5 63.5 15 381 3 76 3 113-012 $313
15 381 2.5 63.5 25 1.7 29 9 1M-1/4QC On One Side 2.5 63.5 19.5 495 3 76 5 113-015 $412
16 406 3 76.2 25 1.7 29 9 1M-1/4QC On One Side 3 76.2 21 533 3 76 6 113-016 $484
18 457 3 76.2 22 1.5 25 8 1M-1/4QC On One Side 3 76.2 24 610 3 76 7 113-018 $598
20 508 4 102 20 1.4 23 7 2M-1/2QC On One Side 4 101.6 27 686 3 76 7 113-020 $678
24 610 4 102 10 0.7 11 4 2M-1/2QC On One Side 4 101.6 33 838 3 76 10 113-024 $796
30 762 5 127 9 0.6 10 3.1 2M-1/2QC On One Side 5 127 42 1067 3 76 12 113-030 $1211
33 838 5 127 9 0.6 10 3.1 2M-1/2QC On One Side 5 127 46.5 1181 3 76 14 113-033 $1393
34 864 5 127 9 0.6 10 3.1 2M-1/2QC On One Side 5 127 48 1219 33 76 15 113-034 $1512
36 914 5 127 9 0.6 10 3.1 2M-1/2QC On One Side 5 127 51 1295 3 76 20 113-036 $1779
42 1067 6 152 9 0.4 10 3.1 2M-1/2QC On One Side 6 152.4 60 1524 3 76 25 113-042 $2164
48 1219 6 152 6.5 0.5 7.5 2.3 2M-1/2QC On One Side 6 152.4 69 1753 3 76 28 113-048 $2469
54 1372 6 152 5 0.3 6 3.5 2M-1/2QC On One Side 6 152.4 78 1981 3 76 30 113-054 $4119
60 1524 7 178 4.5 0.3 5.2 1.6 2M-1/2QC On One Side 7 177.8 87 2210 3 76 30 113-060 $4889
66 1676 7 178 3 0.2 3.5 1.1 2M-1/2QC On One Side 7 177.8 96 2438 3 76 35 113-066 $5225
72 1829 7 178 2 0.1 2.3 0.7 2M-1/2QC On One Side 7 177.8 105 2667 3 76 35 113-072 $5774
84 2134 8 203 1 0.1 1.2 0.35 2M-1/2QC On One Side 8 203.2 123 3124 3 76 40 113-084 $6654
90 2286 8 229 1 0.1 1.2 0.35 2M-1/2QC On One Side 9 228.6 132 3353 3 76 50 113-090 $9819
Please call for current pricing. Refer to Warranty, Terms and Conditions and Pipe Plug Warnings & Notes pages
Petersen Products Company

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
P.O. Box 340, 421 Wheeler Avenue, Fredonia, WI 53021-0340 USA
1 email: sales@PetersenProducts.com www.PetersenProducts.com
Pipe Plugs, Inflatable, Oil Resistant, HD, MULTI-FLEX®, w/o By-Pass, Pipe Sizes: 1 3/4" and Larger, 124 Series
Compact Diameter. Inflates Up To 8 Times For Easy Insertion
Most sizes afford easy placement by one man. Flexibility allows MULTI-FLEX® plugs to navigate through small hot tap
or branch pipe into large pipeline; then inflate with air or water.
Typically used for plugging of pipelines especially when there is a small-restricted access. This is the most flexible plug on the
market; it has the greatest multi-size range and will conform to almost any pipe configuration. A 36” plug will also stopper a 10”
pipeline! When completely deflated, a 72” plug will deflate down to only 15”! The very small-deflated diameter and flexibility
allows insertion and removal through a manhole for plugging otherwise inaccessible pipelines. It is also used as a semi-
permanent valve to isolate hazardous waste spills and regulate flow.
High Strength Flexible Materials Plugs are generally made with Nylon reinforced Nitrile outer ply and have connections for water or air inflation. Many other
materials available.
Multi-Size Applications PETERSEN® MULTI-FLEX® plugs may be used in any pipeline larger than the deflated diameter. Some seepage in smaller size
pipelines may require a specific size vapor sleeve especially when pressure testing.
Most Sizes Available Standard sizes are generally in stock up to a 48” diameter with larger sizes available in just a few days.
Light Weight Allows one person insertion for most sizes and applications.
Higher Head Pressure All inflation pressure is applied to the inside wall of the pipe through the MULTI-FLEX® plug. Molded rubber plugs require much of
the inflation pressure just to expand the plug.
Flexibility Deflated MULTI-FLEX® plug easily navigates bends and small openings. A 72” MULTI-FLEX® plug may be inserted through a 15"
opening!
Custom Configurations Custom Flexible and Rigid Plugs may be manufactured for any shape, high temperature, and severe chemical applications. Please
contact a Petersen engineer to discuss your requirements.
Pipe Diameter Maximum **Pipeline Inflation Deflated Shpg Unit

Maximum Minimum Inflation Max. Head Port* Length Wt Item Price
in mm in mm psig bar ft m in npt in mm lbs Number Each
2 50 1.75 45 80 5.5 92 28 1/2 M - 1/4 QC 12.5 317 4 124-002 $365
3 76 2 51 80 5.5 92 28 3/4 M - 1/4 QC 14 356 5 124-003 $365
4 102 2.5 64 80 5.5 92 28 3/4 M - 1/4 QC 17 431 7 124-004 $431
6 152 3 77 80 5.5 92 28 1 M - 1/4 QC 22 558 8 124-006 $497
8 203 4.5 115 70 4.8 80 24.6 2 M - 1/4 QC 25 635 12 124-008 $574
10 254 5 127 70 4.8 80 24.6 2 M - 1/4 QC 37 939 18 124-010 $651
12 305 5.5 140 70 4.8 80 24.6 2 M - 1/4 QC 42 1066 21 124-012 $762
15 381 6 153 42 2.9 48 14.6 2 M - 1/2 QC 51 1295 24 124-015 $982
16 406 6 153 37 2.5 42 13 2 M - 1/2 QC 54 1371 24 124-016 $1,037
18 457 6.5 166 37 2.5 42 13 2 M - 1/2 QC 59 1498 25 124-018 $1,213
20 508 7 178 32 2.2 37 11.2 2 M - 1/2 QC 65 1651 30 124-020 $1,544
24 610 7 178 30 2 34 10.5 3 M - 1/2 QC 77 1955 47 124-024 $1,764
30 762 8 204 25 1.7 28 8.8 3 M - 1/2 QC 95 2413 72 124-030 $2,911
33 838 9 229 25 1.7 28 8.8 3 M - 1/2 QC 105 2667 79 124-033 $3,065
36 914 9.5 242 20 1.4 23 7 3 M - 1/2 QC 117 2971 85 124-036 $3,297
42 1067 9.5 242 18 1.2 20 6.3 3 M - 1/2 QC 133 3378 136 124-042 $4,741
48 1219 10 254 15 1 17 5.2 3 M - 1/2 QC 149 3784 171 124-048 $5,337
54 1372 12 305 11 0.7 12 3.8 3 M - 1/2 QC 179 4546 190 124-054 $6,571
60 1524 13 331 8 0.5 9 2.8 3 M - 1/2 QC 191 4851 208 124-060 $8,049
66 1676 13 331 7.5 0.5 8 2.6 3 M - 1/2 QC 208 5283 213 124-066 $9,592
72 1829 15 381 7 0.4 8 2.4 3 M - 1/2 QC 225 5715 217 124-072 $12,348
Custom configurations also available *QC Quick connection

Inflation controllers, gauges, hoses, etc. on our accessories page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Inflatable Line Stop™ Pipe Plugs, High Pressure MULTI-FLEX®, Pipe Sizes: 2" and Larger, 129 Series
Hot Tap Insertion, Flange Inflation, Higher Pressure
Other sizes and custom configurations also available

These plugs are generally made with a Nylon reinforced Polyurethane outer ply. Many other materials available.
Centered on End Centered on Diameter
Pipeline Max Inflation Port Length

Dia. Max Dia. Deflated Max Infl. Head Port, Inflation Location Deflated Shipping Wt. Item Number Price
1/4" MNPT
1.75" 160 psi (11.03 184 ft (56.08 Centered on
2" (50.8mm) WITH 1" RAM 6" (152.4mm) 3 Lb (1.36 Kg) 129-002 $1,100
(44.45mm) bar) m) Diameter
ADAPTER
1.875" 160 psi (11.03 184 ft (56.08
2" (50.8mm) 1/2" QC Plug End, Centered 6" (152.4 mm) 3 Lb (1.36 Kg) 129-002-F $1,100
(47.63mm) bar) m)
1.875" 200 psi (13.8 Centered on
2" (50.8mm) 230 ft (70.1 m) 1/4" MNPT 6" (152.4mm) 4 Lb (1.81 Kg) 129-002-HP $1,204
(74.63mm) bar) Diameter
1/4" MNPT
2.875" 160 psi (11.03 184 ft (56.08 Centered on
3" (76.2mm) WITH 1" RAM 9" (228.6mm) 3 Lb (1.36 Kg) 129-003 $1,100
(73.02mm) bar) m) Diameter
ADAPTER
160 psi (11.03 184 ft (56.08
3" (76.2mm) 2.5" (63.5mm) 1/2" QC Plug End, Centered 9" (228.6mm) 2 Lb (0.91 Kg) 129-003-F $1,100
bar) m)
2.875" 200 psi (13.79 Centered on
3" (76.2mm) 230 ft (70.1 m) 1/4" MNPT 9" (228.6mm) 4 Lb (1.81 Kg) 129-003-HP $1,204
(73.02mm) bar) Diameter
3.75" 160 psi (11.03 1" Inflation Centered on
4" (101.6mm) 184 ft (56 m) 11" (279.4mm) 4 Lb (1.81 Kg) 129-004 $1,100
(95.25mm) bar) Ram Adapter Diameter
160 psi (11.03 184 ft (56.08
4" (101.6mm) 3" (76.2mm) 1/2" QC Plug End Centered 13" (330.2mm) 4 Lb (1.81 Kg) 129-004-F $1,100
bar) m)
3.875" 200 psi (13.79 1" Inflation Centered on 5.6 Lb (2.54
4" (101.6mm) 230 ft (70.1 m) 11" (279.4mm) 129-004-HP $1,204
(98.43mm) bar) Ram Adapter Diameter Kg)
6" (152.4mm) 184 ft (56 m) 14" (355.6mm) 5 Lb (2.27 Kg) 129-006 $1,300
3.875" 160 psi (11.03 184 ft (56.08
6" (152.4mm) 1/2" QC Plug End, Centered 15" (381mm) 5 Lb (2.27 Kg) 129-006-F $1,300
(98.43mm) bar) m)
3.875" 230 psi (15.86 265 ft (80.77 1" Inflation Centered on
6" (152.4mm) 14" (355.6mm) 7 Lb (3.18 Kg) 129-006-HP $1,443
(98.43mm) bar) m) Ram Adapter Diameter
*Unless otherwise noted, pipe diameter assumes Schedule 40 steel pipe up through 10" and Standard Schedule with a
.375" wall over 10" nominal size.
Please specify inflation flange location: centered on diameter or centered on end.
Continued

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Inflatable Line Stop™ Pipe Plugs, High Pressure MULTI-FLEX®, Pipe Sizes: 2" and Larger, 129 Series Continued

8" (203.2mm) 184 ft (56 m) 17" (431.8mm) 9 Lb (4.08 Kg) 129-008 $1,400
160 psi (11.03 184 ft (56.08
8" (203.2mm) 5" (127mm) 1/2" QC Plug End, Centered 20" (508mm) 8 Lb (3.63 Kg) 129-008-F $1,400
bar) m)
5.875" 240 psi (16.55 1.5" Inflation Centered on 12.6 Lb (5.72
8" (203.2mm) 276 ft (84.1 m) 17" (431.8mm) 129-008-HP $1,619
(149.23mm) bar) Ram Adapter Diameter Kg)
5.75" 120 psi (8.28 138 ft (42.06 1" Inflation Centered on
10" (254mm) 20" (508mm) 11 Lb (4.99 Kg) 129-010 $1,600
(146.05mm) bar) m) Ram Adapter Diameter
Infl. 1/2" QC
120 psi (8.27 138 ft (42.06 Plug PSI
10" (254mm) 7" (177.8mm) End, Centered 25" (635mm) 11 Lb (4.99 Kg) 129-010-F $1,600
bar) m) Monitor 1/4"
QC Cplg
7.75" 240 psi (16.55 1.5" Inflation Centered on
10" (254mm) 276 ft (84.1 m) 20" (508mm) 15 Lb (6.80 Kg) 129-010-HP $2,067
7.75" 120 psi (8.28 1" X 150 Lb Centered on 26 Lb (11.79
12" (304.8mm) 138 ft (42 m) 23" (584.2mm) 129-012 $1,800
(196.85mm) bar) ANSI Diameter Kg)
11.1" 120 psi (8.27 138 ft (42.06 140 Lb (63.5
12" (304.8mm) 2" X 300 lb 80" (2032mm) 129-012-BB $6,480
(281.91mm) bar) m) Kg)
Infl. 1/2" QC
12" 7.75" 120 psi (8.27 138 ft (42.06 Plug PSI 30"
End, Centered 20 Lb (9.07 Kg) 129-012-F $1,800
(304.80mm) (196.85mm) bar) m) Monitor 1/4" (762.00mm)
QC Cplg
200 psi (13.79 2" X 300 Lb Centered on 36 Lb (16.33
12" (304.8mm) 9.75" (248mm) 230 ft (70.1 m) 23" (584.2mm) 129-012-HP $2,194
bar) ANSI Diameter Kg)
13.25" 7.75" 100 psi (6.90 1" X 150 Lb Centered on 26 Lb (11.79
115 ft (35 m) 26" (660.4mm) 129-014 $2,400
(336.55mm) (196.85mm) bar) ANSI Diameter Kg)
13.25" 9.75" 200 psi (13.79 2" X 300 Lb Centered on 36.5 Lb (16.56
230 ft (70.1 m) 26" (660.4mm) 129-014-HP $3,000
15.25" 9.75" 100 psi (6.90 1-1/4" X 300 Lb Centered on 28 Lb (12.70
115 ft (35 m) 29" (736.6mm) 129-016 $2,500
11.1" 100 psi (6.89 115 ft (35.05 148 Lb (67.13
16" (406.4mm) 2" X 300 lb 80" (2032mm) 129-016-BB $9,000
(281.94mm) bar) m) Kg)
Infl. 1/2" QC
100 psi (6.89 115 ft (35.05 Plug PSI 28 Lb (12.70
16" (406.4mm) 9" (228.6mm) End, Centered 40" (1016mm) 129-016-F $2,500
bar) m) Monitor 1/4" Kg)
QC Cplg
230 ft (70.1 m) 29" (736.6mm) 129-016-HP $3,000
115 ft (35 m) 32" (812.8mm) 129-018 $3,000
11.1" 100 psi (6.89 115 ft (35.05 88" 153 Lb (69.4
18" (457.2mm) 2" X 300 lb 129-018-BB $10,800
(281.94mm) bar) m) (2235.2mm) Kg)
Infl. 1/2" QC
17.25" 100 psi (6.89 115 ft (35.05 Plug PSI 33 Lb (14.97
9" (228.6mm) End, Centered 45" (1143mm) 129-018-F $3,000
(438.2mm) bar) m) Monitor 1/4" Kg)
QC Cplg
230 ft (70.1 m) 32" (812.8mm) 129-018-HP $3,900
115 ft (35 m) 35" (889mm) 129-020 $4,390
11.1" 80 psi (5.51 96" 155 Lb (70.31
20" (508mm) 92 ft (28.04 m) 2" X 300 lb 129-020-BB $14,040
(281.94mm) bar) (2438.4mm) Kg)
Infl. 1/2" QC
100 psi (6.89 115 ft (35.05 Plug PSI 35 Lb (15.88
20" (508mm) 9" (228.6mm) End, Centered 50" (1270mm) 129-020-F $4,390
bar) m) Monitor 1/4" Kg)
QC Cplg
230 ft (70.1 m) 35" (889mm) 129-020-HP $5,488
(488.95mm) (298mm) bar) ANSI Diameter Kg)
11.75" 100 psi (6.90 2" X 300 Lb Centered on 42" 44 Lb (19.96
24" (610mm) 115 ft (35 m) 129-024 $4,950
(298mm) bar) ANSI Diameter (1066.8mm) Kg)
Continued

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
11.75" 80 psi (5.51 112" 157 Lb (71.21

24" (609.6mm) 92 ft (28.04 m) 2" X 300 lb 129-024-BB $15,840
(298.45mm) bar) (2844.8mm) Kg)
100 psi (6.89 115 ft (35.05 1/2" QC Plug & 37 Lb (16.78
bar) m) 1/4" QC Cplg Kb)
23.5" (584- 200 psi (13.79 2" X 300 Lb Centered on 42" 61.5 Lb (27.90
13" (330.2mm) 230 ft (70.1 m) 129-024-HP $6,188
597mm) bar) ANSI Diameter (1066.8mm) Kg)
27-28" (686- 11.75" 100 psi (6.90 2" X 300 Lb Centered on 49" 60 Lb (27.22
115 ft (35 m) 129-028 $9,200
711mm) (298.45mm) bar) ANSI Diameter (1244.6mm) Kg)
100 psi (6.89 115 ft (35.05 1/2" QC Plug & 50 Lb (22.68
bar) m) 1/4" QC Cplg Kg)
27-27.5" (686- 200 psi (13.79 2" X 300 Lb Centered on 49"
15" (381mm) 230 ft (70.1 m) 90 Lb (40.8 Kg) 129-028-HP $11,500
699mm) bar) ANSI Diameter (1244.6mm)
115 ft (35 m) 129-030 $9,800
762mm) (298.45mm) bar) ANSI Diameter (1320.8mm) Kg)
90 psi (6.20 104 ft (31.68 1/2" QC Plug & 53 Lb (24.04
30" (762mm) 14" (355.6mm) End, Centered 75" (1905mm) 129-030-F $9,800
bar) m) 1/4" QC Cplg Kg)
200 psi (13.79 2" X 300 Lb Centered on 52" 85.5 Lb (38.78
29.5" (750mm) 15" (381mm) 230 ft (70.1 m) 129-030-HP $12,250
bar) ANSI Diameter (1320.8mm) Kg)
31-32" (787- 11.75" 80 psi (5.51 2" X 300 Lb Centered on 62 Lb (28.12
92 ft (28.04 m) 55" (1397mm) 129-032 $10,100
813mm) (298.45mm) bar) ANSI Diameter Kg)
31-32" (787.4- 150 psi (10.34 2" X 300 Lb Centered on 100 Lb (45.4
17" (431.8mm) 173 ft (52.7 m) 55" (1397mm) 129-032-HP $12,310
812.8mm) bar) ANSI Diameter Kg)
92 ft (28 m) 129-036 $10,900
914.4mm) (298.45mm) bar) ANSI Diameter (1549.4mm) Kg)
60 PSI (4.1 1/2" QC Plug & 70 Lb (31.75
36" (914.4mm) 14" (355.6mm) 69 ft (21.12 m) End, Centered 90" (2286mm) 129-036-F $10,900
Bar) 1/4" QC Cplg Kg)
150 psi (10.34 4" X 300 Lb Centered on 61" 103.5 Lb
36" (914.4mm) 17" (431.8mm) 173 ft (52.7 m) 129-036-HP $13,625
bar) ANSI Diameter (1549.4mm) (46.95 Kg)
39-40" (990.6- 40 psi (2.76 4" X 300 Lb Centered on 66" 83 Lb (37.65
15" (381mm) 46 ft (14 m) 129-040 $11,700
1016mm) bar) ANSI Diameter (1676.4mm) Kg)
41-42.25"
40 psi (2.76 4" X 300 Lb Centered on 71" 83 Lb (37.65
(1041.4- 15" (381mm) 46 ft (14 m) 129-042 $11,700
1073.1mm)
1-1/2" Cam
42" 40 psi (2.75 83 Lb (37.65
15" (381mm) 46 ft (14.02 m) Groove & 3/4" End, Centered 105" (2667mm) 129-042-F $11,700
(1066.8mm) bar) Kg)
NPT to 1/4" QC
17" (431.8mm) 173 ft (52.7 m) 129-042-HP $19,744
(1073.1mm) bar) ANSI Diameter (1803.4mm) Kg)
47-48.25"
(1193.8- 15" (381mm) 35 ft (10.5 m) 129-048 $13,400
1225.5mm)
1-1/2" Cam
48" 30 psi (2.06 109 Lb (49.44
(1219.2mm) bar) Kg)
NPT to 1/4" QC
48.25" 150 psi (10.34 4" X 300 Lb Centered on 81" 152.5 Lb
17" (431.8mm) 173 ft (52.7 m) 129-048-HP $26,800
(1225.5mm) bar) ANSI Diameter (2057.4mm) (69.20 Kg)
53-54.25"
(1346.2- 15" (381mm) 35 ft (10.5 m) 90" (2286mm) 129-054 $16,300
1377.9mm)
1-1/2" Cam
54" 25 psi (1.72 144 Lb (65.32
(1371.6mm) bar) Kg)
NPT to 1/4" QC
53-54.25"
150 psi (10.34 4" X 300 Lb Centered on 90" 201.5 Lb
(1346.2- 23" (584.2mm) 173 ft (52.7 m) 129-054-HP $32,600
bar) ANSI Diameter (2286.0mm) (91.40 Kg)
1377.9mm)
Continued

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
58.75-60.25"
(1492.2- 17" (431.8mm) 23 ft (7 m) 100" (2540mm) 129-060 $20,200
1530.3mm)
1-1/2" Cam
20 psi (1.37 148 Lb (67.13
60" (1524mm) 15" (381mm) 23 ft (7.01 m)Groove & 3/4" End, Centered 150" (3810mm) 129-060-F $20,200
bar) Kg)
NPT to 1/4" QC
60.25" 140 psi (9.65 4" X 300 Lb Centered on 207 Lb (93.89
23" (584.2mm) 161 ft (49 m) 100" (2540mm) 129-060-HP $50,500
1530.3mm) bar) ANSI Diameter Kg)
64.75-66.25"
(1644.6- 17" (431.8mm) 23 ft (7 m) 129-066 $24,100
1682.7mm)
1-1/2" Cam
66" 20 psi (1.37 165 Lb (74.84
22" (558.8mm) 23 ft (7.01 m) Groove & 3/4" End, Centered 165" (4191mm) 129-066-F $24,100
(1676.4mm) bar) Kg)
NPT to 1/4" QC
64.75-66.25"
(1644.6- 29" (736.6mm) 138 ft (42.1 m) 129-066-HP $54,225
1682.7mm)
70.5-72.5"
(1790.7- 19" (482.6mm) 23 ft (7 m) 129-072 $31,400
1841.5mm)
72" 20 psi (1.37 304" 300 Lb
19" (482.6mm) 23 ft (7.01 m) 6" X 300 lb 129-072-BB $113,040
(1828.8mm) bar) (7721.6mm) (136.058 Kg)
1-1/2" Cam
72" 20 psi (1.37 180 Lb (81.65
(1828.8mm) bar) Kg)
NPT to 1/4" QC
29" (736.6mm) 138 ft (42.1 m) 129-072-HP $70,650
82-84.5"
(2082.8- 19" (482.6mm) 17 ft (5.2 m) 129-084 $40,800
2146.3mm)
84" 15 psi (1.03 352" 330 Lb (149.69
23" (584.2mm) 17 ft (5.18 m) 6" X 300 lb 129-084-BB $146,880
(2133.6mm) bar) (8940.8mm) Kg)
1-1/2" Cam
84" 15 psi (1.03 210 Lb (95.26
(2133.6mm) bar) Kg)
NPT to 1/4" QC
35" (889mm) 127 ft (38.7 m) 129-084-HP $105,400
94-96.5"
(2387.6- 19" (482.6mm) 17 ft (5.2 m) 129-096 $50,200
2451.1mm)
96" 15 psi (1.03 400" 360 Lb (163.29
29" (736.6mm) 17 ft (5.18 m) 6" X 300 lb 129-096-BB $180,720
(2438.4mm) bar) (10160mm) Kg)
1-1/2" Cam
96" 15 psi (1.03 240 Lb (108.86
(2438.4mm) bar) Kg)
NPT to 1/4" QC
94-96.5"
41" 110 psi (7.58 6" X 300 Lb Centered on 156" 336 Lb (152.41
(2387.6- 127 ft (38.7 m) 129-096-HP $129,684
2451.1mm)
84" 15 psi (1.03 352" 330 Lb (149.69
23" (584.2mm) 17 ft (5.18 m) 6" X 300 lb 129-084-BB $146,880
(2133.6mm) bar) (8940.8mm) Kg)

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Oil Resistant, HD, MULTI-FLEX®, with By-Pass, Pipe Sizes: 4" and Larger, 125 Series
Most sizes afford easy placement by one man. Flexibility allows MULTI-FLEX® plugs to navigate through
small hot tap or branch pipe into large pipeline; then inflate with air or water.
Typically used for plugging of pipelines especially when there is small-restricted access. This is the most flexible plug
on the market; it has the greatest multi-size range and will conform to almost any pipe configuration. The very small-
deflated diameter and flexibility allows insertion and removal through a manhole or a live hot tap for plugging
otherwise inaccessible pipelines. The by-pass allows flow through by pumping or gravity.
High Strength Flexible Materials Plugs are generally made with Nylon reinforced Nitrile outer ply and have connections for water or air inflation. Many other
materials available.
By-Pass The by-pass design allows flow through during repairs. Flow-thru diameters available up to 3"
on standard MULTI-FLEX® plugs and larger sizes on custom configurations.
Multi-Size Applications PETERSEN® MULTI-FLEX® plugs may be used in any pipeline larger than the deflated diameter. Some seepage in smaller size
pipelines may require a specific size vapor sleeve especially when pressure testing.
Most Sizes Available Almost any size and configuration is available.
Light Weight PETERSEN® MULTI-FLEX® By-Pass plugs are much lighter than molded rubber plugs for easy placement.
Diver Friendly Small deflated size allows removal of air for easier insertion under water.
Higher Head Pressure All inflation pressure is applied to the inside wall of the pipe through the MULTI-FLEX® plug. Molded rubber plugs require
much of the inflation pressure just to expand the plug.
Flexibility Deflated MULTI-FLEX® plug easily navigates bends and small openings. A 72” MULTI-FLEX® plug may be inserted through a
15” manhole!
Vapor Seal Specific size vapor seals are available to allow multi-size line testing with one MULTI-FLEX®
plug.
Custom Configurations Custom Flexible and Rigid Plugs may be manufactured for any shape, high temperature, and severe chemical applications.
Please contact a Petersen engineer to discuss your requirements.
Pipe Diameter By-Pass Maximum **Pipeline Inflation Deflated Shpg Unit
Maximum Minimum Connection Inflation Max. Head Port* Length Wt Item Price
in mm in mm in npt psig bar ft m in npt in mm lbs Number Each
4 102 3.5 89 1M 25 1.7 28 8.8 1/4 F - 1/4 QC 17 432 11 125-004 $606
6 152 4.5 115 1.5 M 25 1.7 28 8.8 1/4 F - 1/4 QC 24 610 15 125-006 $681
8 203 5 127 2M 25 1.7 28 8.8 3/8 F - 1/4 QC 27 686 23 125-008 $770
10 254 5 127 2M 25 1.7 28 8.8 3/8 F - 1/4 QC 39 991 26 125-010 $859
12 305 5.5 140 3M 25 1.7 28 8.8 3/8 F - 1/4 QC 44 1118 38 125-012 $986
15 381 5.75 147 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 53 1347 51 125-015 $1,240
16 406 5.75 147 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 56 1423 55 125-016 $1,303
18 457 6 152 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 61 1550 64 125-018 $1,506
20 508 6.5 166 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 67 1702 70 125-020 $1,886
24 610 8 203 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 79 2007 76 125-024 $2,139
30 762 8.5 216 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 97 2464 83 125-030 $3,458
33 838 9 229 3M 25 1.7 28 8.8 3/8 F - 1/2 QC 107 2718 89 125-033 $3,635
36 914 10 254 3M 20 1.4 23 7 3/8 F - 1/2 QC 119 3023 156 125-036 $3,902
42 1067 11 280 3M 18 1.2 20 6.3 3/8 F - 1/2 QC 135 3429 173 125-042 $5,563
48 1219 12 305 3M 15 1 17 5.2 3/8 F - 1/2 QC 151 3836 191 125-048 $6,248
54 1372 13 331 3M 11 0.7 12 3.8 3/8 F - 1/2 QC 181 4598 224 125-054 $7,667
60 1524 14 356 3M 8 0.5 9 2.8 3/8 F - 1/2 QC 193 4903 237 125-060 $9,366
66 1676 14 356 3M 7.5 0.5 8 2.6 3/8 F - 1/2 QC 210 5334 259 125-066 $11,142
72 1829 15 381 3M 7 0.4 8 2.4 3/8 F - 1/2 QC 227 5766 282 125-072 $14,310
Custom configurations also available *QC Quick connection


Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Inflatable Line Stop™ Block And Bleed Plugs, High Pressure, Pipe Sizes: 12" and Larger, 129BB Series
Positive Isolation of Toxic or Flammable Product
PETERSEN® MULTI-FLEX® Isolation Double Block & Bleed Inflatable Line Stop™ Plug is a revolutionary Dual Seal plug to allow a positive isolation of
toxic or flammable product. The vent between the two seals allows the operator to monitor the seal integrity, vent any product that seeps past
the first seal, or introduce an inert gas or water between the seals for a positive isolation. These Isolation Block and Bleed plugs are available for
most size, pressure, chemical, and temperature requirements. We look forward to providing plugging systems to meet your specific
requirements.
Plug Diameter Maximum **Pipeline Inflated Seal Shpg Unit

Maximum* Inflation Max. Head Inflation Length each plug Wt Item Price
in mm psig bar ft m Flange in mm lbs Number Each
12 305 120 8.3 138 42 2" x 300 lb 18 457 140 129-012-BB $6,480
15 381 100 6.9 115 35 2" x 300 lb 22 558 145 129-015-BB $8,640
16 406 100 6.9 115 35 2" x 300 lb 24 610 148 129-016-BB $9,000
18 457 100 6.9 115 35 2" x 300 lb 27 685 153 129-018-BB $10,800
20 508 80 5.5 92 28 2" x 300 lb 30 762 155 129-020-BB $14,040
24 610 80 5.5 92 28 2" x 300 lb 36 914 157 129-024-BB $15,840
30 762 60 4.1 70 21 2" x 300 lb 45 1143 173 129-030-BB $26,280
33 838 50 3.4 58 17 2" x 300 lb 49 1244 176 129-033-BB $27,720
36 914 50 3.4 58 17 2" x 300 lb 54 1372 190 129-036-BB $28,800
42 1067 40 2.7 46 14 4" x 300 lb 63 1600 203 129-042-BB $42,120
48 1219 30 2 35 10.5 4" x 300 lb 72 1829 229 129-048-BB $48,240
54 1372 30 2 35 10.5 4" x 300 lb 81 2057 264 129-054-BB $58,680
60 1524 20 1.3 23 7 4" x 300 lb 90 2286 268 129-060-BB $72,720
66 1676 20 1.3 23 7 4" x 300 lb 99 2514 285 129-066-BB $86,760
72 1829 20 1.3 23 7 6" x 300 lb 108 2743 300 129-072-BB $113,040
84 2133 15 1 17 5.3 6" x 300 lb 126 3200 330 129-084-BB $146,880
96 2438 15 1 17 5.3 6" x 300 lb 144 3657 360 129-096-BB $180,720
*Unless otherwise noted, pipe diameter assumes Schedule 40 steel pipe up through 10" and Standard Schedule with a
.375" wall over 10" nominal size.
● Please specify inflation flange location: centered on diameter or centered on end.
● May not provide a perfect seal for pipeline testing without customization

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Inflatable Line Stop™ Pipe Plugs, High Pressure MULTI-FLEX®, Pipe Sizes: 2" and Larger, 128 Series
Plug pressurized pipelines with MULTI-FLEX® Plugs

This Hot Tap MULTI-FLEX® Plug is configured for installation through a hot tap. The Plug has an internal stiffener and a directional shoe on one
end for installation through a hot tap and around a 90 degree bend. These Plugs generally have a woven ballistic nylon reinforced polyurethane
outer ply but may be customized for a customer's specific requirements.
● Easy hot tap (live) insertion

● Stops flow for repairs
● Small deflated diameter
● Flexibility allows navigation around corners
● Tough materials for long life
● These plugs are generally made with a Nylon reinforced
Polyurethane outer ply. Many other materials and sizes available.
Plug Diameter Maximum **Pipeline Deflated

Inflation Shpg Unit
Maximum Hot Tap Inflation Max. Head Port Length Wt Item Price
2 51 1.75 45 90 6.2 103 31.3 3/4 F RE* 10.75 273 2 128-002 $1,400
3 76 1.875 48 90 6.2 103 31.3 3/4 F RE* 13.75 349 2 128-003 $1,400
4 102 2.5 64 90 6.2 103 31.3 3/4 M 19 482 6 128-004 $1,100
6 152 3.25 83 90 6.2 103 31.3 1 1/4 M 25 635 10 128-006 $1,200
8 203 4.5 114 90 6.2 103 31.3 2M 29 736 18 128-008 $1,700
10 254 4.75 121 90 6.2 103 31.3 2M 40 1016 26 128-010 $1,900
12 305 5.5 140 90 6.2 103 31.3 2M 46 1168 30 128-012 $2,000
15 381 5.5 140 57 3.9 65 19.8 2M 55 1397 34 128-015 $2,100
16 406 5.5 140 48 3.3 55 16.7 2M 58 1473 34 128-016 $2,300
18 457 6.25 159 48 3.3 55 16.7 2M 63 1600 36 128-018 $2,500
20 508 6.5 165 40 2.7 46 14 2M 69 1752 41 128-020 $2,600
24 610 7.25 184 37 2.5 42 12.8 3M 82 2082 63 128-024 $2,800
30 762 7.875 200 30 2 34 10.3 3M 100 2540 80 128-030 $4,300
33 838 8.875 225 30 2 34 10.3 3M 110 2794 87 128-033 $4,600
36 914 9.5 241 27 1.8 31 9.4 3M 122 3098 93 128-036 $4,800
42 1067 9.5 241 21 1.4 24 7.3 3M 138 3505 144 128-042 $6,700
48 1219 9.75 248 15 1 17 5.1 3M 154 3911 179 128-048 $7,600
54 1372 11.75 298 12 0.8 13 3.9 3M 184 4673 198 128-054 $9,200
60 1524 12.75 324 9 0.6 10 3 3M 199 5054 216 128-060 $11,300
66 1676 12.75 324 8 0.5 9 2.8 3M 216 5486 221 128-066 $13,200
72 1829 15 381 7 0.4 8 2.4 3M 233 5918 225 128-072 $17,100
84 2134 15 381 5 0.3 5 1.5 3M 268 6807 261 128-084 $23,700
96 2438 15 381 4 0.2 4 1.2 3M 303 7696 297 128-096 $27,100
* Requires Rotating Elbow

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Oil Resistant, MULTI-FLEX® w/o By-Pass, Pipe Sizes: 1.7" and Larger, 114 Series

Most sizes afford easy placement by one man. Flexibility allows MULTI-FLEX® plugs to navigate
through small hot tap or branch pipe into large pipeline; then inflate with air or water.
Typically used for plugging or testing of pipelines especially when there is small-restricted access. The MULTI-FLEX® plug is the most flexible plug
on the market; it has the greatest multi-size range and will conform to almost any pipe configuration. The small-deflated diameter and flexibility
allows insertion and removal through a manhole for plugging otherwise inaccessible pipelines. It is also used as a semi permanent valve to isolate
hazardous waste spills. Nylon reinforced Nitrile outer ply provides a long life and an excellent seal for testing. No shelf rot like rubber plugs.
● High Strength Flexible Materials: Plugs are generally made with Nylon reinforced Nitrile outer ply and have connections for water or air
inflation.
● PETERSEN® MULTI-FLEX® plugs may be used in any pipeline larger than the deflated diameter. Allow for some seepage in smaller size
pipelines
● Most sizes are available for prompt shipment.
● Light Weight: Allows one person insertion for most sizes and applications.
● Diver Friendly: Small deflated size allows removal of air for easier insertion under water.
● Higher Head Pressure: All inflation pressure is applied to the inside wall of the pipe through the
MULTI-FLEX® plug. Molded rubber plugs require much of the inflation pressure just to expand the
plug.
● Flexibility: Deflated MULTI-FLEX® plug easily navigates bends and small openings. A 72” MULTI-FLEX®
plug may be inserted through a 10” opening!
● Custom Configurations: Custom Flexible and Rigid Plugs have been manufactured for many high temperature and severe chemical
Pipe Diameter Maximum **Pipeline Inflation Deflated Shpg Unit
Maximum Minimum Inflation Max. Head Port* Length Wt Item Price
2 51 1.7 44 30 2.1 35 10.6 1/2 M - 1/4 QC 10.5 266 2 114-002 $154
3 76 2 51 30 2.1 35 10.6 1/2 M - 1/4 QC 14 356 2 114-003 $154
4 102 2.5 64 30 2.1 35 10.6 1/2 M - 1/4 QC 16 406 3 114-004 $188
6 152 3 77 30 2.1 35 10.6 1 M - 1/4 QC 19 482 6 114-006 $212
8 203 3.5 89 30 2.1 35 10.6 1 M - 1/4 QC 21 533 6 114-008 $265
10 254 3.5 89 30 2.1 35 10.6 1 M - 1/4 QC 26 660 7 114-010 $309
12 305 4.5 115 25 1.7 29 8.8 1 1/2 M - 1/4 QC 30 762 11 114-012 $419
15 381 5.5 140 25 1.7 29 8.8 2 M - 1/2 QC 34 864 16 114-015 $486
16 406 5.5 140 25 1.7 29 8.8 2 M - 1/2 QC 41 1041 22 114-016 $519
18 457 6 153 22 1.5 25 7.7 2 M - 1/2 QC 45 1143 24 114-018 $652
20 508 6 153 20 1.4 23 7.9 2 M - 1/2 QC 50 1270 25 114-020 $728
24 610 6 153 10 0.7 12 3.5 2 M - 1/2 QC 59 1498 28 114-024 $816
30 762 6 153 9 0.6 10 3.2 2 M - 1/2 QC 73 1854 34 114-030 $1,323
33 838 7 178 9 0.6 10 3.2 2 M - 1/2 QC 74 1879 36 114-033 $1,578
36 914 7 178 9 0.6 10 3.2 2 M - 1/2 QC 84 2133 40 114-036 $1,919
42 1067 8 204 9 0.6 10 3.2 3 M - 1/2 QC 96 2438 56 114-042 $2,316
48 1219 9 229 6.5 0.4 7.5 2.3 3 M - 1/2 QC 107 2717 72 114-048 $2,669
54 1372 9 229 5 0.3 5.8 1.8 3 M - 1/2 QC 139 3530 90 114-054 $4,521
60 1524 10 254 4.5 0.3 5.2 1.6 3 M - 1/2 QC 146 3708 104 114-060 $5,292
66 1676 10 254 4 0.3 4.6 1.4 3 M - 1/2 QC 159 4038 124 114-066 $5,623
Deflated
72 1829 10 254 4 0.3 4.6 1.4 3 M - 1/2 QC 171 4343 146 114-072 $6,174
84 2133 11 280 3 0.2 3.5 1.1 3 M - 1/2 QC 197 5004 195 114-084 $7,056
For Integral anchoring harness: Add 25% to price - Suffix "H"

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Oil Resistant, MULTI-FLEX® with By-Pass, Pipe Sizes: 2.5" and Larger, 115 Series

Most sizes afford easy placement by one man. Flexibility allows MULTI-FLEX® plugs to navigate
through small hot tap or branch pipe into large pipeline; then inflate with air or water.
Typically used for plugging or testing of pipelines especially when there is small-restricted access. The MULTI-FLEX® plug is the most flexible plug
on the market; it has the greatest multi-size range and will conform to almost any pipe configuration. The small-deflated diameter and flexibility
allows insertion and removal through a manhole for plugging otherwise inaccessible pipelines. It is also used as a semi permanent valve to isolate
hazardous waste spills. Nylon reinforced Nitrile outer ply provides a long life and an excellent seal for testing. No shelf rot like rubber plugs.
● High Strength Flexible Materials: Plugs are generally made with Nylon reinforced Nitrile outer ply and have connections for water or air
inflation.
● Bypass: The by-pass design allows flow through during repairs. Flow-thru diameters available up to 3" on standard MULTI-FLEX® plugs and
larger sizes on custom configurations.
● PETERSEN® MULTI-FLEX® plugs may be used in any pipeline larger than the deflated diameter. Allow for some seepage in smaller size
pipelines
● Almost any size and configuration is available.
● Light Weight: PETERSEN® MULTI-FLEX® By-Pass plugs are much lighter than molded rubber plugs for easy placement.
● Diver Friendly: Small deflated size allows removal of air for easier insertion under water.
● Higher Head Pressure: All inflation pressure is applied to the inside wall of the pipe through the MULTI-FLEX® plug. Molded rubber plugs
require much of the inflation pressure just to expand the plug.
● Flexibility: Deflated MULTI-FLEX® plug easily navigates bends and small openings. A 72” MULTI-FLEX® plug may be inserted through a 24”
manhole!
● Vapor Seal: Specific size vapor seals are available to allow multi-size line testing with one MULTI-FLEX® plug.
● Custom Configurations: Custom Flexible and Rigid Plugs have been manufactured for many high temperature and severe chemical
applications. Please contact a Petersen engineer to discuss your requirements.
Pipe Diameter By-Pass Maximum **Pipeline Inflation Deflated Shpg Unit

Maximum Minimum Connection Inflation Max. Head Port* Length Wt Item Price
in mm in mm in npt psig bar ft m in npt in mm lbs Number Each
4 102 2.5 63 1/8 F 30 2.1 35 10.6 1/8 F - 1/4 QC 16 406 6 115-004 $346
6 152 3 76 1/8 F 30 2.1 35 10.6 1/8 F - 1/4 QC 19 482 10 115-006 $374
8 203 3.5 89 1/8 F 30 2.1 35 10.6 1/8 F - 1/4 QC 21 533 11 115-008 $441
10 254 3.5 89 1/8 F 30 2.1 35 10.6 1/8 F - 1/4 QC 26 660 13 115-010 $497
12 305 4.5 114 3/8 F 25 1.7 29 8.8 3/8 F - 1/4 QC 30 762 17 115-012 $635
15 381 5.5 140 3/4 F 25 1.7 29 8.8 3/8 F - 1/2 QC 34 864 24 115-015 $718
16 406 5.5 140 3/4 F 25 1.7 28 8.8 3/8 F - 1/2 QC 41 1041 28 115-016 $760
18 457 6 152 3/4 F 22 1.5 25 7.7 3/8 F - 1/2 QC 45 1143 32 115-018 $924
20 508 6 152 3/4 F 20 1.4 23 7 3/8 F - 1/2 QC 50 1270 35 115-020 $1,021
24 610 6 152 3/4 F 10 0.7 11 3.5 3/8 F - 1/2 QC 59 1498 38 115-024 $1,131
30 762 6 152 3/4 F 9 0.6 10 3.2 3/8 F - 1/2 QC 73 1854 46 115-030 $1,764
33 838 7 178 3/4 F 9 0.6 10 3.2 3/8 F - 1/2 QC 74 1879 50 115-033 $2,083
36 914 7 178 3/4 F 9 0.6 10 3.2 3/8 F - 1/2 QC 84 2133 54 115-036 $2,509
42 1067 8 203 3/4 F 9 0.6 10 3.2 3/8 F - 1/2 QC 96 2438 70 115-042 $3,006
48 1219 9 229 3/4 F 6.5 0.4 7.5 2.3 3/8 F - 1/2 QC 107 2717 90 115-048 $3,447
54 1372 9 229 3/4 F 5 0.3 5.8 1.8 3/8 F - 1/2 QC 134 3404 111 115-054 $5,762
60 1524 10 254 3/4 F 4.5 0.3 5.2 1.6 3/8 F - 1/2 QC 146 3708 127 115-060 $6,726
66 1676 10 254 3/4 F 4 0.3 4.6 1.4 3/8 F - 1/2 QC 159 4038 148 115-066 $7,139
72 1829 10 254 3/4 F 4 0.3 4.6 1.4 3/8 F - 1/2 QC 171 4343 180 115-072 $7,828
*QC Quick connection

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Inflatable Line Stop™ Plug Insertion Systems, Pipe Sizes: 2” and Larger, 939 Series
Compact Plug Diameter Allows Insertion Through Small Hot (Live) Tap
Launch cylinder with inflation ram and packing seal allows insertion of PETERSEN® Plugs into pressurized pipeline.
Typically used for plugging of pipelines through a hot tap in the side of the pipe or through a valve on the end of a pipe. A variety of PETERSEN®
MULTI-FLEX® Plugs are available for most chemical, pressure, and temperature requirements. A 36” plug as an example may be installed through
a 10" tap with the pipeline pressurized.
View our Hot Tap Plugging Slide

Show and Video on our website
For 128-Series MULTI-FLEX® Plugs For 129-Series MULTI-FLEX® Plugs

Max Launch Cylinder Max Launch Cylinder
Infl Ram ~shpn Unit Infl Ram ~Shpg Unit
Plug Plug
Dia Length Length Wt Item Price Dia Length Length Wt Item Price
Dia Dia
in in in lbs Number Each in in in lbs Number Each
in in
2-3 2 npt 24 48 Call 939-8020-24 $1,304 2 2 npt 12 36 Call 939-8020-12 $1,224
4 3 npt 36 60 Call 939-8030-36 $1,521 3 3 npt 12 36 Call 939-8030-12 $1,338
6 4 flanged 36 72 Call 939-9040-36 $2,330 4 4 npt 12 48 Call 939-8040-12 $1,467
8 6 flanged 48 84 Call 939-9060-48 $2,411 6 4 npt 24 60 Call 939-8040-24 $1,692
10 6 flanged 60 96 Call 939-9060-60 $2,666 8-10 6 flanged 24 60 Call 939-9060-24 $1,759
12-15 6 flanged 72 108 Call 939-9060-72 $2,856 12-15 8 flanged 36 72 Call 939-9080-36 $2,242
18 8 flanged 84 120 Call 939-9080-84 $3,327 24 12 flanged 48 84 Call 939-9120-48 $3,544
72 16 flanged 264 336 Call 939-9160-264 $8,415
84 16 flanged 324 396 Call 939-9160-324 $8,804
96 16 flanged 372 444 Call 939-9160-372 $9,357
*Insertion System Includes: launch cylinder, inflation packing seal (gland), inflation ram, centering guide, and drain/fill valve. (Full port tapping valve with RF flange and
hot tap sleeve or saddle by others.) 150 lb. flanges are standard and the lengths are calculated with estimated valve heights and pipe IDs and ODs and may be adjusted
for your requirement. Other sizes and configurations available.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Completion Plugs, 150-Series
Completion Plug allows for removal of Hot Tap Valve
Call for configuration and pricing for your requirements
Products covered by one or more of the following patents:

4,565,222; 5,353,842; 5,901,752; 6,446,669; 6,568,429; 6,899,138 and other applications pending.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Hot Tap Sleeves, 910-4 Series
For Hot Tap Pipe Plug Insertion Systems
These hot tap sleeves are fast and easy to install with simple hand tools, require no caulking or special equipment and may be used with any
standard tapping valve. The sleeve design directly reinforces without shims or pads and weighs less than heavy cast iron sleeves. The self-
energizing gasket will not roll or bind on installation and the seal increases with line pressure. The generous cross section of the sleeve assures a
good seal even on rough or pitted pipe. These hot tap sleeves consist of two sections of heavy welded steel that bolt together on the pipe and seal
against a concave wedge gasket around the tap opening. The outlet half has a recessed flat faced flange to mate with standard tapping valves per
MSS SP60 up through 12" size-on-size. For tap sizes 14" and above, flanges can be furnished to accommodate the valve requirements. The outlet
half also has a 3/4" npt test plug.
Material Specifications: Body is made of carbon steel, Flanges of AWWA C207 Class D, ANSI 150 lb. drilling, Gasket is Nitrile, Bolts, nuts, and
washers are of a high strength low alloy steel with heavy semi-finished hexagon nuts, and the Finish is fusion bonded Fexi-Coat epoxy, coated to an
average of 12 mil thickness.
Nominal Size Pipe x Shpg Unit

Flange O.D. Range Wt Item Price
Outlet Inches Inches lbs Number Each
4x3 4.5 34 910-4304-030450 $689
4 x 4* 4.5 34 910-4304-040450 $689
6x3 4.5 34 910-4306-030450 $631
6x4 6.57 - 6.73 71 910-4306-040657 $631
6 x 6* 6.57 - 6.73 76 910-4306-060657 $740
8x4 8.36 - 8.75 78 910-4308-040836 $687
8x6 8.36 - 8.75 87 910-4308-060836 $750
10 x 4 10.45 - 10.88 82 910-4310-041045 $692
10 x 6 10.45 - 10.88 94 910-4310-061045 $772
10 x 8 10.45 - 10.88 125 910-4310-081045 $1007
12 x 6 12.42 - 12.88 135 910-4312-061242 $817
12 x 8 12.42 - 12.88 170 910-4312-081242 $1039
14 - 16 x 6 15.73 - 16.22 111 910-4316-061573 $872
14 - 16 x 8 15.73 - 16.22 148 910-4316-081573 $1103
14 - 16 x 10 15.73 - 16.22 204 910-4316-101573 $1497
16 x 6 17.88 - 18.43 122 910-4316-061788 $930
16 x 8 17.88 - 18.43 162 910-4316-081788 $1146
16 x 10 17.88 - 18.43 216 910-4316-101788 $1567
18 x 8 19.41 - 20.01 162 910-4318-081941 $1146
18 x 10 19.41 - 20.01 216 910-4318-101941 $1567
18 x 12 19.41 - 20.01 245 910-4318-121941 $1797
20 x 8 21.51 - 22.15 180 910-4320-082151 $1259
20 x 10 21.51 - 22.15 232 910-4320-102151 $1697
20 x 12 21.51 - 22.15 281 910-4320-122151 $1851
24 x 8 24.82 - 25.52 197 910-4324-082482 $1381
24 x 10 24.82 - 25.52 258 910-4324-102482 $1793
24 x 12 24.82 - 25.52 284 910-4324-122482 $1967
*Size-on-Size Taps require a 1/2" undersize shell cutter.

Other sizes and configurations available upon request.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Annular Seals, Inflatable MULTI-FLEX®, 111-Series
For almost any size, pressure, chemical, and temperature requirements
Petersen can manufacture Annular Seals for almost any size, pressure, chemical, and temperature
requirements. Annular seals can be made with a continuous seal to slip over the end of a pipe or open-ended to
form around a pipe already in place. The PETERSEN® MULTI-FLEX® Annular Seals are very flexible, easy to
install, and have many inflation connection options. These seals are ideal for bypassing a pipeline during repairs
or any other temporary small to large pipeline connection.
We will quickly provide a price and shipment lead time. To receive a quick quote contact us by email, fax or
phone.
Please provide:
● Inner seal diameter
● Outer seal diameter
● Head pressure to hold back
● Any unusual chemical or temperature requirements
Seal ID Seal OD Seal Length Max. Inflation Item Price

Inches mm Inches mm Inches mm PSI Bar Number Each
4.5 115 12 194 7.63 194 25 1.7 111-0408-6 $996
6.63 169 12 305 6 153 25 1.7 111-0612-6 $912
8.83 225 15.25 388 6 153 25 1.7 111-0816-6 $1,061
10.75 274 17.25 439 8 204 25 1.7 111-1018-8 $1,375
12.75 324 17.25 439 8 204 25 1.7 111-1218-8 $1,244
16 407 23.25 591 8 204 25 1.7 111-1624-8 $1,666
18 458 23.25 591 12 305 25 1.7 111-1830-12 $1,666
20 508 25.25 642 12 305 25 1.7 111-2026-12 $1,763
24 610 35.25 896 16 407 25 1.7 111-2436-16 $2,943
30 762 41.25 1048 16 407 25 1.7 111-3042-16 $3,350
36 915 47.25 1201 18 458 25 1.7 111-3648-18 $4,320
42 1067 47.25 1201 18 458 25 1.7 111-4248-18 $3,564
Other sizes available on request.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Bladders, Custom Inflatable
For most temperature and chemical requirements
Custom flexible and Inflatable Line Stop™ products are available from materials applicable to most temperature and chemical requirements. A few
of the many woven and non-woven materials used in the past include Canvas, EPDM, Kevlar, Neoprene, Nitrile, nylon, Polyurethanes, Polyester,
Polyethylene, Polyvinylchloride, Viton, Viton Extreme, etc.
Products covered by one or more of the following patents: 4,565,222;

5,353,842; 5,901,752; 6,446,669; 6,568,429; 6,899,138 and other
applications pending.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Duct Balloons and Seals, Custom Inflatable
For almost any requirement
These custom Inflatable Line Stop™ duct balloons are available from materials applicable to most temperature and chemical requirements and can
be inserted within duct doors to provide a superior seal far better than frames and sheeting. Please contact us via phone, email or fax with your
unique needs so we may offer a solution for your project.
Products covered by one or more of the following patents: 4,565,222;

5,353,842; 5,901,752; 6,446,669; 6,568,429; 6,899,138 and other
applications pending.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Plumber Style Test, Rubber With & Without
By-Pass, Pipe Sizes: 0.8" to 12", 137 Series
Multi-size pneumatic molded rubber plugs for testing residential and commercial plumbing
Made of special Styrene-butadiene rubber (SBR), these pipe plugs are ideal for testing of plumbing systems in residential and commercial
buildings where smaller and shorter pipe plugs are needed. By-pass plugs are threaded both ends.
Tire inflation valves may be removed to expose

British Standard Pipe Thread fitting for direct hose
connection or for adding a quick connect. Blocking
plugs are 1/4" BSPT and bypass plugs are 1/8" BSPT
excluding the 8”, 10” & 12” Bypass Plugs which are
1/4".
By-pass plugs are threaded both ends.
Pipe Diameter By-Pass Plug Required **Pipeline Deflated Shpg Unit

Maximum Minimum Size Diameter Inflation Max. Head Valve Length Wt Item Price
in mm in mm in npt in mm psig ft m Type in mm lbs Number Each
Multi-Size Pneumatic Sealing Plugs Without By-Pass
3 76 1.8 46 1.8 46 36 34 10.4 tire 4.3 110 1 137-003-M $39
4 102 2.8 72 2.8 72 36 34 10.4 tire 5.1 130 1 137-004-M $43
6 152 3.4 87 3.3 84 36 34 10.4 tire 7.7 196 1 137-006-M $106
8 203 5.6 143 5.6 143 36 34 10.4 tire 9.8 249 3 137-008-M $137
Single Size Pneumatic Sealing Plugs Without By-Pass
1.3 33 0.8 20 0.8 20 36 34 10.4 tire 3.9 99 1 137-0013 $22
1.6 41 1.3 33 1.3 33 36 34 10.4 tire 3.9 99 1 137-0016 $23
2 51 1.8 46 1.8 46 36 34 10.4 tire 4 102 1 137-002 $25
3 76 2.8 72 2.8 72 36 34 10.4 tire 4.5 114 1 137-003 $26
4 102 3.4 87 3.3 87 36 34 10.4 tire 6.9 176 1 137-004 $30
6 152 5.6 143 5.6 143 36 34 10.4 tire 8.7 221 3 137-006 $77
8 203 6.9 176 6.9 176 36 34 10.4 tire 10.4 265 5 137-008 $121
10 254 8.6 219 8.6 219 36 34 10.4 tire 11.6 295 8 137-010 $198
12 305 10.8 275 10.8 275 36 34 10.4 tire 13.2 336 15 137-012 $247
Multi-Size Plugs With By-Pass
4 102 2.8 72 1/2 F 2.8 72 36 34 10.4 tire 5.1 130 1 137-004-8M $126
6 152 3.4 87 1/2 F 3.3 87 36 34 10.4 tire 7.7 196 2 137-006-8M $143
8 203 5.6 143 1F 5.6 143 36 34 10.4 tire 9.8 249 5 137-008-8M $191
Single Size Plugs With By-Pass
2 51 1.8 46 1/8 F 1.8 46 36 34 10.4 tire 4.3 110 1 137-002-8 $93
3 76 2.8 72 1/2 F 2.8 72 36 34 10.4 tire 4.5 114 1 137-003-8 $102
4 102 3.4 87 1/2 F 3.3 87 36 34 10.4 tire 6.9 176 2 137-004-8 $105
6 152 5.6 143 1F 5.6 143 36 34 10.4 tire 8.7 221 5 137-006-8 $122
8 203 6.9 176 2F 6.9 176 36 34 10.4 tire 11.2 285 8 137-008-8 $156
10 254 8.6 219 2F 8.6 219 36 34 10.4 tire 13.6 346 12 137-010-8 $197
12 305 10.8 275 2F 10.8 275 36 34 10.4 tire 15.6 397 21 137-012-8 $285

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Multi-size rubber plugs for testing residential and commercial plumbing systems
Single-Size Test Plugs

The most popular pipe plug for 50 years still gets the job done every time. Designed to test drain,
vent, and waste systems, this single-size plug is a must for those involved in the installation and repair
of residential, commercial, and industrial piping systems.
● More flexible than traditional mechanical plugs

● Easily fits test tees, closet bends, sanitary tees, floor drains, and roof vents
● Includes a 12" removable zinc-plated steel chain for ease of replacement 3/4" through 6" 8" through 12"
● Over-sized ring prevents accidental loss down a pipe
● Can be used for head pressure testing or as a blocking plug for low-pressure air testing
The 8", 10", and 12" single-size plugs are ideal for the testing and maintenance of sanitary or storm sewer pipes. These plugs have a removable 3/16" eyebolt and a
threaded 1/4" tire inflation valve that can easily be replaced or exchanged with a quick disconnect or any threaded 1/4" fitting. Can be used for head pressure
testing or as a back plug for air testing. Where 1/4” and 1/2” port are included, the 1/4” port has a tire valve and the 1/2” port is blocked.
Multi-Size Test Plugs
Based on the single-size test plug design, one multi-size test plug works in up to three different pipe sizes - saving time, money, and shelf/truck space. Easily fits
closet bends, sanitary tees, and floor drains. These plugs are ideal for both blocking sewer flow and for use as a back plug in low-pressure air tests.
Both the single and multi-size test plugs are made from long-lasting natural rubber with a molded rib design. These plugs are durable, tear-resistant, and works on
any type of pipe, including out-of-round pipe. Always block plugs when conducting air tests.
**Pipeline Max Allowable

Back Pres
Pipe Diameter Nominal Required Head Air Deflated Shpg Unit
Maximum Minimum Size Inflation Pressure Pressure Valve Length Dia Wt Item Price
psig lbs Each
in mm in mm in mm ft m psi bar Type in mm in mm Number
For Plumbing Applications: equipped with an over-sized ring and 12" chain. The 1/4" tire inflation valve is molded in with a cap.
2.1 53 1.3 32 1.25-2 32-50 40 40 12 17 1.2 molded 5.56 141 1.21 31 1 130-002-M $34.10
3.1 80 1.9 48 2-3 50-75 35 40 12 17 1.2 molded 5.57 141 1.78 45 1 130-003-M $37.30
4.1 104 2.8 70 3-4 75-100 40 40 12 17 1.2 molded 5.18 132 2.64 67 1 130-004-M $45.90
6.1 155 3.4 87 4-6 100-150 30 40 12 17 1.2 molded 9.47 241 3.28 83 2 130-006-M $106.10
For Sewer Applications: equipped with a removable tire inflation valve and has an eye bolt for plug installation and removal.
6.25 159 3.75 92 4-6 100-150 40 40 12 17 1.2 1/8" 10.25 250 3.5 85 2 130-006-MS $117
8.25 210 5.25 140 6-8 150-200 35 40 12 17 1.2 1/4" 14 356 4.5 114 4 130-008-MS $182
8.25 210 3.6 92 4-8 100-200 30 30 9.1 13 0.9 1/4" 20.6 469 3.5 70 3 130-008-MSM $306
12.25 311 7 178 8-12 200-300 20 25 8 11 0.75 1/4" 16 406 6.75 171 7 130-012-MS $428
12.25 310 5.5 140 6-12 150-300 30 30 9.1 13 0.9 1/4" 26.25 667 5.25 133 5 130-012-MSM $461
16.25 413 7.5 186 8-16 200-400 30 30 9.1 13 0.9 1/4" 29.5 750 7.25 184 15 130-016-MS $564
18.25 464 10.75 273 12-18 300-450 25 25 8 11 0.75 1/4" 24 610 10.5 267 23 130-018-MS $865
24.25 616 11 279 12-24 300-600 30 30 9.1 13 0.9 1/4" 39.5 1003 10.75 273 28 130-024-MS $882
16.7
24.25 616 11 279 12-24 300-600 30 5.1 7.5 0.5 1/4" 33 839 10.75 273 24 130-024-MSS $882
5
30.5 775 14.5 368 15-30 375-750 25 25 7.6 11 0.76 1/4" & 1/2" 51 1289 14 356 45 130-030-MS $2,000
40 1000 19 475 20-40 500-1000 22 20 6.1 8.7 0.6 1/4" & 1/2" 46.25 1175 18.5 470 100 130-040-MS $2,420
Continued next page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
(Continued)
Multi-size rubber plugs for testing residential and commercial plumbing systems
Pipe Diameter Nominal Required Head Air Deflated Shpg Unit

Maximum Minimum Size Inflation Pressure Pressure Valve Length Dia Wt Item Price
in mm in mm in mm psig ft m psi bar Type in mm in mm lbs Number Each
3510 1080 22.5 570 24-42 600-1050 25 20 6.1 9 0.62 1/4" & 1/2" 52 1320 22 560 100 130-042-MS $3,510
50 1270 20.5 520 24-48 600-1200 22 23 7 10 0.7 1/4" & 1/2" 74.5 1892 20 508 125 130-048-MS $3,410
60 1524 38 965 40-60 1000-1524 25 20 6.1 8.7 0.6 1/4" & 1/2" 73 1855 37.25 946 235 130-060-MS $8,030
60.5 1537 20.5 520 24-60 600-1524 22 14 4.3 6 0.41 1/2" 88 2235 20 500 180 130-060-MSM $6,750
72 1835 44 1118 48-72 1200-1800 12 14 4.3 6 0.41 1/2" 100 2540 43 1092 290 130-072-MS $9,110
96 2400 54 1400 54-96 1400-2400 11 14 4.3 6 0.41 1/2" 128 3200 50 1270 500 130-096-MS $12,540
Single-Size Test Plugs: the 1/4" tire inflation valve is molded in with a cap and sizes 8" and larger have a removable tire inflation valve with 1/4" MNPT
1.31 33 0.75 19 .75-1.25 19-30 45 40 12 17 1.2 molded 3.75 95 0.73 18 1 130-0012 $42.40
1.75 44 1.17 30 1.25-1.5 30-40 40 30 9 13 0.9 molded 5.56 141 1.12 33 1 130-0015 $28.90
2.25 57 1.9 48 2 50 40 30 9 13 0.9 molded 3.34 85 1.78 45 1 130-002 $38.60
2.75 70 2.34 48 2.5 65 35 30 9 13 0.9 molded 4.5 114 2.31 59 1 130-0025 $35.20
3.25 83 2.77 70 3 75 35 30 9 13 0.9 molded 5.18 132 2.64 67 1 130-003 $32.30
4.25 108 3.41 87 4 100 30 30 9 13 0.9 molded 6.41 163 3.28 83 1 130-004 $38.60
5.25 133 4.6 117 5 125 30 30 9 13 0.9 molded 7.88 200 4.48 114 2 130-005 $73.30
6.25 159 5.44 138 6 150 30 30 9 13 0.9 molded 9.05 230 5.32 135 2 130-006 $96.40
8.25 210 7 178 8 200 25 40 12 17 1.2 1/4" 10.11 257 6.75 172 4 130-008 $149.00
10.25 260 9 229 10 250 25 40 12 17 1.2 1/4" 11.74 298 8.7 221 6 130-010 $242.00
12.25 311 10.5 267 12 300 25 40 12 17 1.2 1/4" 13.83 351 10.3 262 11 130-012 $305.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Rigid Core By-Pass MULTI-FLEX®, Pipe Sizes: 1 3/4" to 12", 126 Series
By-Pass (Flow-Thru) Design Allows Continuous Flow
● Rigid By-Pass Plugs are generally made for higher pressure applications.
● They can be manufactured manufactured to meet a customer’s exact requirements.
● These plugs are generally built on a hollow P.V.C. or aluminum core and have a 1/8" to 3/8" F npt inflation port.
● These plugs are made with Polyurethane or Ballistic Nylon Reinforced Polyurethane.
Pipe Diameter
Maximum **Pipeline Deflated
Maximum Minimum By-Pass Inflation Max. Head Length Shpg Unit
Item
Connection Wt Price
in mm in mm psig bar ft m in m Number
in npt lbs Each
2 51 1.75 44 1/8 F 85 5.7 41 12.6 8 0.2 1 126-002-8 $261
3 76 2.5 63 1/4 F 85 5.7 41 12.6 10 0.3 1 126-003-8 $280
4 102 3.5 88 1/2 F 85 5.7 41 12.6 12 0.3 2 126-004-8 $297
6 153 5.5 140 1F 50 3.5 41 12.6 12 0.3 5 126-006-8 $494
8 203 7 178 2F 50 3.5 41 12.6 16 0.4 10 126-008-8 $647
10 254 9 229 2F 50 3.5 41 12.6 18 0.4 11 126-010-8 $727
12 305 11 279 2F 50 3.5 41 12.6 22 0.5 12 126-012-8 $948

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Remote Placement, Pipe Sizes: 6” to 18”, 130-7 Series
Eliminates the need to enter confined spaces and speeds up the pipe plugging process
The Remo®Remote Placement plug provides two advantages - it eliminates the need to enter confined
spaces and speeds up the pipe plugging process. The system is safer and less expensive to use than
conventional plugging methods because it requires no confined space equipment to simply block sewer
flow. A lightweight aluminum pole system* or a standard 1½" iron pipe** is used to place the Remo®
plug in the sewer system.
● Multi-size design to seal multiple pipe sizes
● Can be locked at a 90˚ angle to seal openings in drop manholes
● Can be used as a back plug for sewer tests
● Adapters available to convert Muni-Ball® plugs into Remo® plugs
● Made with Natural Rubber
Poly System Features:
● Consists of 6' lightweight aluminum poles with push-button construction
● Designed for plugs up to 30 lbs used in manhole depths of up to 20'
● 1/6th the weight of iron pipe
● Pole system requires Remo® pole adapter
Nominal Range Maximum Inflation Deflated Deflated Inflation Chain/Eye Shpg Item Unit
Size of Use Back Pressure Pressure Length Diameter Thread Bolts Wt lbs Number Price
6"-10" 5.5"-10.25" 13 psi 30 ft. 30 psi 24" 5.25"
1/4" (2) 3/8" (1) 9 130-710 $380
(150-250 mm) (140-260 mm) (9.1 M) (2.1 bar) (2.1 bar) (610 mm) (133 mm)
8"-12" 7.0"-12.25" 13 psi 30 ft. 30 psi 25.5" 6.75"
1/4" (2) 3/8" (1) 12 130-712 $514
(200-300 mm) (178-311 mm) (9.1 M) (2.1 bar) (2.1 bar) (648 mm) (171 mm)
12"-18" 10.50"-18.25" 13 psi 30 ft. 30 psi 34" 10.5"
1/4" (2) 3/8" (1) 27 130-718 $935
(300-450 mm) (273-464 mm) (9.1 M) (2.1 bar) (2.1 bar) (863) (267 mm)
Use pole(s) (or 1-1/4" iron pipe) for remote

Accessories placement. Pole threads into plug fitting and use
Shpg Item Pole Adapters to extend length by adding
Description Wt lbs Number Unit Price additional 6' poles - e.g. two poles for 12' requires
6' Remo® Pole 4 924-1307-72 $43.70 one Pole Adapter. Poles are designed for plugs
Remo® Pole Adapter (1-1/4" MNPT) 1 924-1307-0125 $56.80 up to 30 pounds used in manhole depths up to 20
1-1/2" Remo® Muni-Ball® Adapter 4 130-1307-015 $142.00 feet.
2" Remo® Muni-Ball® Adapter 4 924-1307-02 $149.00
2"-1-1/2" Remo® Reducer Bushing 1 924-1307-02015 $23.10
Always block plugs when conducting air tests.
3"-2" Remo® Reducer Bushing 2 924-1307-0302 $34.00
4"-2" Remo® Reducer Bushing 2 924-1307-0402 $37.60

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Two-Stage Long Kevlar® Reinforced Molded Rubber Plugs,
Pipe Sizes: 1.75" to 6", 138 Series
Kevlar® Reinforced *NR-SBR Rubber Plugs allow blocking and testing wye joints
These Kevlar® reinforced *NR-SBR rubber plugs are used for blocking and testing laterals and Y
joints with air or water. Long Plugs are equipped with a 3 ft. inflation hose, chain, and over-size
capture-disc for remote placement and retrieval.
Plugs can be easily inserted at an angle through connections into a main pipe. Sealing of each
end is controlled separately by an internal two-stage controller.
* NR = Isoprene rubber, natural. SBR = Styrene-butadiene rubber.
Pipe Diameter Plug Required **Pipeline Deflated Shpg Unit

Maximum Minimum Diameter Inflation Max. Head Valve Length Wt Item Price
in mm in mm in mm psig ft m Type in mm lbs Number Each
3 76 1.75 45 1.6 41 36 34 10.4 tire 22 559 2 138-003 $67
4 102 2.5 64 2.4 61 36 34 10.4 tire 24 610 3 138-004 $81
6 152 3.38 86 3.2 81 36 34 10.4 tire 31 787 4 138-006 $171
Included hose is 3’ in length
Two-stage control - Inflate the plug as shown...stage 1 seals one side of the "Y" at about 22 PSI, to prevent outflow .. inflate to
36 PSI and the mainline is also blocked.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Long Test-Ball, Pipe Sizes: 2” to 6”, 130-3 Series
Designed for Waste Stack Testing

Cherne's Long Test-Ball® plugs are designed for waste stack testing and sealing the rise and the run to perform the test. These long ball plugs can
also be used to seal the wye to conduct sewer air tests. Molded-in sealing ribs at each end of the plug ensure a leak-free seal.
Long Test-Ball® Plug ("The Original") Features:
● Ring and chain assembly keeps plug from entering line during deflation
● Includes 3' extension hose
MS2® Long Test-Ball® Plug Features:
● Multi-size design for use in various pipe diameters
● Multi-stage design eliminates backsplash
● Integrated relief valve reduces the possibility of over-inflation
● Nylon strap and handle keeps plug from entering line during deflation
● Includes 5’ extension hose
Inflation Product Deflated Deflated Shpg Unit Price

Nominal Size Range of Use Maximum Back Pressure Pressure Weight Length Diameter Wt lbs Item Number Each
Long Test-Ball
2" 1.75"-2.25" 13 psi 30 ft. 45 psi 1.1 lbs 18.25" 1.5"
2 130-302 $63.80
(50 mm) (44-57 mm) (0.9 bar) (9.1 M) (3.1 bar) (0.51 kg) (464 mm) (38 mm)
3" 2.75"-3.25" 13 psi 30 ft. 35 psi 1.88 lbs 20.75" 2.31"
3 130-303 $72.40
4" 3.5"-4.25" 13 psi 30 ft. 30 psi 2.31 lbs 24.75" 2.5"
3 130-304 $88.40
4"-6" 3.25"-6.25" 13 psi 30 ft. 45 psi 4 lbs 28.5" 3.0"
5 130-306-M $200.80
(100-150 mm) (83-159 mm) (0.9 bar) (9.1 M) (3.1 bar) (1.81 kg) (724 mm) (76 mm)
5" 4.5"-5.25" 13 psi 30 ft. 30 psi 4 lbs 27.75" 3.18"
5 130-305 $143.20
6" 5.5"-6.25" 13 psi 30 ft. 30 psi 5.3 lbs 28.25" 4.12"
7 130-306 $189.50
MS2 Long Test-Ball
2" - 3" 1.75"-3.25" 13 psi 30 ft. 40 psi 1.31 lbs 19.44" 1.58"
2 130-303-MM $120.50
(50-75 mm) (44-83 mm) (0,9 bar) (9.1 M) (2,8 bar) (0.5 kg) (494 mm) (37 mm)
3" - 4" 2.75"-4.25" 13 psi 30 ft. 40 psi 2.45 lbs 23.75" 2.38"
4 130-304-MM $153.50
4" - 6" 3.5"-6.25" 13 psi 30 ft. 40 psi 3.91 lbs 26.62" 3.25"
5 130-306-MM $237.90

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, High Dilation, 131 Series
Individual plugs cover a wide range of pipe sizes

Individual plugs to cover a wide range of pipe sizes
Pipe Diameter Required Inflation
Deflated Shpg Unit
Inflation Valve Deflated Length Item
Minimum Maximum Diameter Wt Price
Pressure Type Number
lbs Each
in mm in mm in mm Psig Kg in mm
3.75" 95.3 8.00" 203.2 3.5 88.9 43 3 QC 13.75 349 2 131-00408 $500
4.00" 101.6 10.00" 254 3.62 91.9 43 3 QC 24 610 3.3 131-00410 $700
6.00" 152.4 12.00" 304.8 5.7 145 43 3 QC 20 508 5.5 131-00612 $600
7.67" 194.8 12.00" 304.8 7.28 185 43 3 QC 15 381 5.5 131-00812 $700
8.00" 203.2 20.00" 508 7.28 185 43 3 QC 27.56 700 8.8 131-00820 $930
11.50" 292.1 20.00" 508 11 279 43 3 QC 22.4 569 12 131-01220 $1,000
20.00" 508 32.00" 812.8 19 483 43 3 QC 39.75 1010 37 131-02032 $2,900
20.00" 508 40.00" 1016 19 483 43 3 QC 50 1270 52 131-02040 $3,000
Universal coupler for SAE or European quick connect fittings
Back pressure in PSI as measured in clean, dry steel pipe
Part number 131-00408 131-00410 131-00612 131-00812 131-00820 131-01220 131-02032 131-02040
Pipe dia (in) 4" - 8" 4" - 10" 6" - 12" 8" - 12" 8" - 20" 12" - 20" 20" - 32" 20" - 40"
4 26 30
6 23 28 33
8 22 23 30 33 33
10 19 26 28 33
12 26 20 33 33
14 30 29
18 29 18
20 15 20 33 33
24 33 33
27 28 30
32 28 29
36 22
40 15
High Dilation Plug Kit - covers sizes 4" through 40"
Description Item Number Unit Price
Kit - includes below: 131-01000K $2,763.20
Item Description
131-00410 Pipe Plug 4"-10"
131-00820 Pipe Plug 8"-20"
131-02040 Pipe Plug 20"-40"
936-2038-2024 Hose assembly 3/8" x 24' 1/4" male & female quick connect
936-2300-025 Pressure monitoring valve assembly with receptacles for gauge & relief valve
936-1000-1060 Gauge 0 to 60 psig

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Municipal Style Test, Kevlar® Reinforced Rubber w/o By-Pass,
Pipe Sizes: 1.60" to 72", 134-0 Series
Multi-size pneumatic molded rubber plugs for testing residential and commercial plumbing
These plugs are molded of special NR-SBR rubber, reinforced with Kevlar® tire cording. Due to their light weight and short length, these plugs are
easy to handle even in large diameter sizes.
All plugs are equipped with a 1/4" male quick-connect inflation port. Reinforcement sleeves available for heavy duty use. 150°F / 65°C Maximum
Operating Temperature
NR = Isoprene rubber, natural. SBR = Styrene-butadiene rubber.
Pipe Diameter Plug Required **Pipeline Valve Eye Bolt Deflated Shpg Unit
Maximum Minimum Diameter Inflation Max. Head Type Size Length Wt Item Price
in mm in mm in mm psig ft m in QC in mm in mm lbs Number Each
2.8 72 1.6 41 1.4 36 36 34 10.4 1/4 M 0.24 6 7.7 195 1 134-002 $142
6 153 2.8 72 2.7 69 36 34 10.4 1/4 M 0.24 6 13.2 335 2 134-006 $198
8 203 3.63 92 3.6 92 36 34 10.4 1/4 M 0.24 6 21.1 536 3 134-008 $283
12 305 5.63 143 5.6 143 36 34 10.4 1/4 M 0.32 8 23 584 7 134-012 $412
16 406 7.5 190 7.6 194 36 34 10.4 1/4 M 0.32 8 25 635 10 134-016 $498
21 533 10.75 273 10.7 272 36 34 10.4 1/4 M 0.32 8 26.6 676 16 134-021 $694
24 610 13 330 12.7 323 36 34 10.4 1/4 M 0.39 10 34.1 867 22 134-024 $772
30 762 14 356 13.5 343 36 34 10.4 1/4 M 0.39 10 42.7 1085 26 134-030 $1,428
40 1016 19 483 18.6 473 22 16 4.9 1/4 M 0.39 10 46.7 1187 48 134-040 $1,632
48 1219 23 584 22.6 574 22 16 4.9 1/4 M 0.39 10 59 1499 90 134-048 $2,714
60 1524 30 762 23.6 600 15 13 4 1/4 M 0.39 10 90.6 2302 148 134-060 $6,324
72 1828 32 812 23.6 600 15 13 4 1/4 M 0.39 10 116.5 2959 231 134-072 $8,815
Inflation controllers, gauges, hoses, etc. on our accessories page. See 936-series for protective sleeves.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Leak Detector Type, Pipe Sizes: 5.5" to 96", 130-4 Series
Designed for both low-pressure sewer line acceptance tests as well as leak location testing. Leak Detector Plugs can also be used to block flow.
Features:
● Eye bolts on both ends
● Easy-to-use quick-disconnect hose connections
● Rupture discs available
● Cross-biased cording on sizes
● 15"-30", 24"-42", and 40"-60"
Front Leak Detector Plugs also come equipped with:
● Color-coded inflation ports
● Removable air fittings
● Flexible internal hoses
● Field replaceable sleeves
See next page for
pressure
ratings
Range Maximum Inflation Deflated Deflated Inflation Chain/Eye Shpg Item Unit Price
Nominal Size of use Back Pressure Pressure Length Diameter Thread Bolts Wt lbs Number Each
5.5"-10.5"
6" - 10" 13 psi 30 ft. 30 psi 23.5" 5.25"
(140-260 mm) 1/4" 7/16" 9 130-410-F $432
(150-250 mm) (0,9 bar) (9 M) (2,1 bar) (593 mm) (133 mm)
8" - 12" 7"-12.5" 13 psi 30 ft. 30 psi 26.25" 6.75"
1/4" 7/16" 16 130-412-F $588
(200-300 mm) (178-312 mm) (0,9 bar) (9 M) (2,1 bar) (667 mm) (171 mm)
12" - 18" 10.75"-18.5" 13 psi 30 ft. 25 psi 31.5" 10.25"
1/4" 7/16" 29 130-418-F $1,015
(300-450 mm) (273-478 mm) (0,9 bar) (9 M) (1,7 bar) (800 mm) (260 MM)
15" - 30" 14.5"-30.5" ^**11 psi 25 ft. 25 psi 51" 14"
1/4" & 1/2" 3/8" 60 130-430-F $2,210
(375-750 mm) (368-775 mm) (0,76 bar) (7.6 M) (1,7 bar) (1289 mm) (356 mm)
20" - 40" 19"-40" ^8.7 psi 20 ft. 22 psi 46.25" 18.5"
1/4" & 1/2" 1/2" 87 130-440-F $2,600
24" - 42" 22.5"-42.5" ^**9 psi 20 ft 25 psi 52" 22"
1/4" & 1/2" 3/8" 123 130-442-F $3,800
24" - 48" 20.5"-50" ^10 psi 23 ft. 22 psi 74.5" 20"
1/4" & 1/2" 5/8" 150 130-448-F $3,510
24" - 60" 20.5"-60" ^6 psi 14 ft. 22 psi 88" 19.45"
1/4" & 1/2" 5/8" 225 130-460-FM $7,130
40" - 60" 38"-60" ^**8.7 psi 20 ft. 25 psi 73" 37.25"
1/4" & 1/2" 3/8" 248 130-460-F $8,030
48" - 72" 44"-72" ^6 psi 14 ft. 12 psi 100" 43"
1/2" 5/8" 310 130-472-F $9,420
54" - 96" 54"-96" ^6 psi 14 ft. 11 psi 128" 50"
1/2" 5/8" 500 130-496-F $13,390
Back Plug
6" - 10" 5.5"-10.5" 13 psi 30 ft. 30 psi 23.5" 5.25"
1/4" 3/8" 7 130-410-B $306
8" - 12" 7"-12.5" 13 psi 30 ft. 30 psi 26.25" 6.75"
1/4" 3/8" 11 130-412-B $432
12" - 18" 10.75"-18.5" 13 psi 30 ft. 25 psi 31.5" 10.25"
1/4" 3/8" 26 130-418-B $864
(300-450 mm) (273-478 mm) (0,9 bar) (9 M) (1,7 bar) (800 mm) (260 MM)
See next page for full Pressure Range

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Leak Detector Type, Pipe Sizes: 5.5" to 96", 130-4 Series (Continued)
Designed for both low-pressure sewer line acceptance tests as well as leak location testing. Leak Detector Plugs can also be used to block flow.
Pressure Ratings
Plug Size 15" 18" 21" 24" 30" 36" 42" 48" 54" 60"
Air Pressure Ratings (PSI)
17 13 13 11 11
15" - 30"
(1,2 Bar) (0,9 bar) (0,9 bar) (0,76 bar) (0,76 bar)
15 13 11 9
24" - 42"
(1,0 bar) (0,9 bar) (0,76 bar) (0,62 bar)
15 13 11 8.7
40" - 60"
(1,0 bar) (0,9 bar) (0,76 bar) (0,6 bar)
Head Pressure Ratings (Feet of Head)
40 30 30 25 25
15" - 30"
(12 M) (9 M) (9 M) (7.6 M) (7.6 M)
35 30 25 20
24" - 42"
(11 M) (9 M) (7.6 M) (6.1 M)
35 30 25 20
40" - 60"
(11 M) (9 M) (7.6 M) (6.1 M)

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Large Flow-Through Bypass, Pipe Sizes: 5.70" to 24.98", 130-6 Series
Use for gravity bypassing or bypass pumping

These plugs serve multiple applications. Great for gravity bypassing or
bypass pumping.
● Large male NPT threaded bypass, top end only
● Equipped with removable 3/8" eye bolt for lifting and lowering
with a poly-lift line
● Removable tire valve allows for easy replacement
● Lightweight aluminum bypass
● Multi-size offers great expansion range
● Lightweight aluminum bypass Plug shown with
● Made with Natural Rubber interchangeable flange
Multi-Size Large Flow-Through Bypass Plugs with
Interchangeable Flanges
● Multi-size offer great expansion range
● Lightweight aluminum bypass
● Feature interchangeable bypass flange, allowing the
same plug to be used for different applications
● Removable tire valve allows for easy replacement
Note: NPT bypass plugs threaded on one end only.
Caps/plugs provided on sizes through 6” bypass
Original Large Flow-Through

Shpg Unit
Nominal By-pass Range Maximum Inflation Deflated Deflated Inflation Chain / Item
Wt Price
Size Diameter of Use Back Pressure* Pressure Length Diameter Thread Eye bolts Number
lbs Each
6" 5.69"-6.34" 11 psi 25 ft. 30 psi 13.25" 5.38"
4" MNPT 1/8" (1) 3/8" (1) 12 130-606-4 $411
(150 mm) (145 -161 mm) (0,76 bar) (7.6 M) (2,1 bar) (337 mm) (137 mm)
6" - 10" 5.75"-10.25" 10 psi 23 ft 40 psi 24.5" 5.65"
4" MNPT 1/4" (1) 3/8" (1) 15 130-610-4M $586
8" 7.75"-8.45" 11 psi 25 ft. 30 psi 16" 7.5"
6" MNPT 1/4" (1) 3/8" (1) 15 130-608-6 $531
(200 mm) (195-215 mm) (0,76 bar) (7.6 M) (2,1 bar) (406 mm) (191 mm)
8" - 12" 7"-12.25" 15 psi 34 ft. 35 psi 26" 6.75"
4" MNPT 1/4" (1) 3/8" (1) 22 130-612-4 $743
(200-300 mm) (178-311 mm) (1 bar) (10.5 M) (2,4 bar) (660 mm) (165 mm)
8" - 10" 7.25"-10.25" 11 psi 25 ft. 35 psi 14.88" 6.94"
4" MNPT 1/4" (1) 3/8" (1) 10 130-610-4 $302
10" 9.75"-10.46" 11 psi 25 ft. 30 psi 20" 9.13"
8" OD 1/4" (1) 3/8" (1) 22 130-610-8 $664
8" - 12" 7"-12.25" 15 psi 34 ft. 35 psi 26" 6.76"
6" MNPT 1/4" (1) 3/8" (1) 23 130-612-6M $803
(200-300 mm) (178-311 mm) (1 bar) (10.5 M) (2,4 bar) (660 mm) (165 mm)
10" - 12" 9.25"-12.25" 11 psi 25 ft 30 psi 17.25" 8.81"
6" MNPT 1/4" (1) 3/8" (1) 17 130-612-6 $466
12" 10" non- 11.75"-12.52" 11 psi 25 ft. 30 psi 20" 11.13"
1/4" (1) 3/8" (1) 27 130-612-10 $791
(300 mm) threaded (300-318 mm) (0,76 bar) (7.6 M) (2,1 bar) (508 mm) (283 mm)
12" - 15" 10.62"-15.25" 11 psi 25 ft. 30 psi 17.88" 10.25"
6" MNPT 1/4" (1) 3/8" (1) 22 130-615-6 $640
12" - 18" 11.25"-18.25" 10 psi 23 ft. 25 psi 28" 11"
6" MNPT 1/4" (1) 3/8" (1) 42 130-618-6 $1,520
15" 12" non- 13.9"-15.56" 11 psi 25 ft. 30 psi 20" 13.13"
1/4" (1) 3/8" (1) 31 130-615-12 $955
12" - 18" 11.25"-18.25" 10 psi 23 ft. 25 psi 28" 11"
8" MNPT 1/4" (1) 3/8" (1) 42 130-618-8 $1,750
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Large Flow-Through Bypass, Pipe Sizes: 5.70" to 24.98", 130-6 Series (Continued)
Use for gravity bypassing or bypass pumping
18" 15" non- 16.88"-18.74" 11 psi 25 ft. 30 psi 20" 16.13"

1/4" (1) 3/8" (1) 41 130-618-15 $1,110
21" 18" non- 20.01"-21.81" 11 psi 25 ft. 30 psi 20" 19.13"
1/4" (1) 3/8" (1) 45 130-621-18 $1,290
24" 20" non- 22.63"-24.98" 11 psi 25 ft. 30 psi 20" 21.13"
1/4" (1) 3/8" (1) 51 130-624-20 $1,480
Multi-Size Large Flow-Through Plugs

Shpg Unit
Nominal By-pass Range Maximum Inflation Deflated Deflated Inflation Chain / Item
Wt Price
Size Diameter of Use Back Pressure* Pressure Length Diameter Thread Eye bolts Number
lbs Each
14" - 21" 13.6"-21.25" 10 psi 23 ft. 25 psi 30" 13.25"
6" MNPT 1/8" (1) 3/8" (2) 60 130-621-6 $1,750
14" - 21" 13.6"-21.26" 10 psi 23 ft. 25 psi 30" 13.25"
8" MNPT 1/8" (1) 3/8" (2) 60 130-621-8 $1,870
14" - 21" 13.6"-21.27" 10 psi 23 ft 25 psi 30" 13.25"
10" MNPT 1/8" (1) 3/8" (2) 60 130-621-10 $2,190
18" - 24" 16.5"-24.25" 10 psi 23 ft. 22 psi 34" 16”
6" MNPT 1/8" (1) 1/2" (2) 90 130-624-6 $2,040
18" - 24" 16.5"-24.26" 10 psi 23 ft. 22 psi 34" 16"
8" MNPT 1/8" (1) 1/2" (2) 90 130-624-8 $2,130
18" - 24" 16.5"-24.27" 10 psi 23 ft. 22 psi 34" 16"
10" MNPT 1/8" (1) 1/2" (2) 90 130-624-10 $2,360
Large Flow-Through Flange Kit

Shpg
Nominal By-pass Wt Item Unit Price
Size Diameter lbs Number Each
14" - 21" 6" MNPT 6 924-130-6216 $435
14" - 21" 8" MNPT 7 924-130-6218 $586
18" - 24" 8" MNPT 8 924-130-6248 $713
18" - 24" 10" MNPT 7 924-130-62410 $863

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Municipal Style, Pipe Sizes: 1.5" to 96", 130-2 Series
Offers a full bypass to allow testing and monitoring of the piping system.
The Muni-Ball Plug offers a full bypass allowing both testing and monitoring
of the piping system. It is ideal for installation and repair of residential or
commercial piping applications. Muni-Ball® products may be used for
maintenance of municipal infrastructure, including sanitary and storm sewer
pipe systems. They are durable, rugged and are effective on almost any type
of pipe. Muni-Balls with flexible bypass are bendable to 90˚ and are
threaded both ends - otherwise, threaded one end only.
Muni-Ball® Plugs are designed with ¼" Schrader Tire inflation valve and
larger diameter Muni-Ball® Plugs include a removable threaded valve,
allowing the user to replace with quick disconnect fittings. Muni-Balls with
flexible bypass are bendable to 90˚ and are threaded both ends - otherwise,
threaded one end only.
Shpg Unit
Nominal By-pass Range Maximum Deflated Deflated Inflation Chain / Wt Item Price
Size Diameter of Use Back Pressure* Inflation Pressure Length Diameter Thread Eye bolts lbs Number Each
1.5" 1.49"-1.88" 22 psi 50 ft 40 psi 3.75" 1.4" Molded Removable
1/8" MNP 1 130-2015-01 $118.50
(40 mm) (38-48 mm) (1,5 bar) (15 M) (2,8 bar) (97 mm) (36 mm) in Valve Chain
6"
2" 1.88"-2.25" 22 psi 50 ft 40 psi 1.75" Molded Removable
1/8" FNP (152 1 130-202-01 $127.70
(50 mm) (48-57 mm) (1,5 bar) (15 M) (2,8 bar) (44 mm) in Valve Chain
mm)
3" 2.62"-3.25" 22 psi 50 ft 40 psi 8" 2.5" Molded Removable
3/4" FNP 2 130-203-07 $133.90
(75 mm) (67-83 mm) (1,5 bar) (15 M) (2,8 bar) (203 mm) (64 mm) in Valve Chain
4" 3.25"-4.25" 22 psi 50 ft 40 psi 8" 3.25" Molded
3/4" FNP 1/4" (1) 2 130-204-07 $138.00
(100 mm) (83-108 mm) (1,5 bar) (15 M) (2,8 bar) (203 mm) (80 mm) in Valve
4" - 6" 3.75"-6.25" 17 psi 40 ft 35 psi 10.75" 3.5"
3/4" FNP 1/8" 1/4" (1) 3 130-206-07 $181.30
4" - 8" 3.75"-8.25" 13 psi 30 ft. 30 psi 22" 3.75"
†3/4" MNP 1/4" 1/4" (1) 9 130-208-07 $473.00
(100-200 mm) (100-200mm) (0,9 bar) (9.1 M) (2,1 bar) (559mm) (93 mm)
6" 4.50"-6.25" 13 psi 30 ft. 35 psi 7" 4.5"
1 1/2" FNP 1/8" 1/4" (1) 3 130-206-15 $162.70
6" - 8" 5.50"-8.25" 17 psi 35 psi 13" 5"
1 1/2" FNP 40 ft(12 M) 1/4" 3/8" (1) 6 130-208-15 $253.00
(150-200 mm) (133-212 mm) (1,2 bar) (2,4 bar) (330 mm) (125 mm)
6" - 12" 5.50"-12.25" 13 psi 30 ft. 30 psi 26.25" 5.25"
†1" MNP 1/4" 3/8" (1) 11 130-212-1 $517.00
8" 7.00"-8.25" 13 psi 30 ft. 35 psi 10" 6.75"
3" FNP 1/4" 1/4" (1) 7 130-208-3 $198.00
8" - 10" 7.00"-10.25" 17 psi 40 ft 30 psi 14.5" 6.75"
2" FNP 1/4" 3/8" (1) 10 130-210-2 $332.00
8" - 12" 7.00"-12.25" 17 psi 40 ft 25 psi 22" 6.75"
2" FNP 1/4" 3/8" (1) 18 130-212-2 $568.00
8" - 16" 7.75"-16.25" 13 psi 30 ft. 30 psi 32" 7.5"
†2" FNP 1/4" 3/8" (2) 16 130-216-2 $739.00
10" 9.00"-10.25" 13 psi 30 ft. 35 psi 11.75" 8.75"
3" FNP 1/4" 3/8" (1) 10 130-210-3 $262.00
12" 10.50"-12.25" 13 psi 30 ft. 35 psi 13.75" 10.25"
3" FNP 1/4" 3/8" (1) 16 130-212-3 $369.00
12" - 18" 10.75"-18.75" 13 psi 30 ft. 25 psi 27.25" 10.5" $1,12
4" FNP 1/4"(2) 3/8" (2) 33 130-218-4
(300-450 mm) (300-450 mm) (0,9 bar) (9.1 M) (1,7 bar) (692 mm) (267 mm) 0.00
12" - 24" 11.25"-24.0" 13 psi 30 ft. 30 psi 40" 11" $1,22
†2" MNP 1/4" 3/8" (2) 40 130-224-2
(300-600 mm) (286-616 mm) (0,9 bar) (9.1 M) (2,1 bar) (1016 mm) (282 mm) 0.00
15" - 16" 14.0"-16.0" 13 psi 30 ft. 35 psi 19.75" 13.75"
3" FNP 1/4" 3/8" (1) 36 130-216-3 $583.00
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Municipal Style, Pipe Sizes: 1.5" to 96", 130-2 Series (Continued)
Shpg Unit
Nominal By-pass Range Maximum Deflated Deflated Inflation Chain / Wt Item Price
Size Diameter of Use Back Pressure* Inflation Pressure Length Diameter Thread Eye bolts lbs Number Each
^**11
15" - 30" 14.5"-30.5" 25 ft. 25 psi 51" 14"
†2 1/2" MNP psi 1/4" & 1/2" 3/8" (4) 69 130-230-25 $2,360
(375-750 mm) (375-750 mm) (7.6 M) (1,7 bar) (1289 mm) (356 mm)
(0,76 bar)
18" 17.5"-19.5" 13 psi 30 ft. 25 psi 24.75" 17"
2" FNP 1/4" 1/2" (2) 83 130-218-2 $911
20" - 40" 19"-40" ^8.7 psi 20 ft. 22 psi 46.25" 18.5"
†2" MNP 1/4" & 1/2" 1/2" (2) 88 130-240-2 $2,930
(500-1000 mm) (475-1000mm) (0,6 bar) (6.1 M) (1,5 bar) (1175 mm) (470 mm)
20" - 40" 19"-40" ^8.7 psi 20 ft. 22 psi 46.25" 18.5"
†4" MNP 1/4" & 1/2" 1/2" (2) 95 130-240-4 $2,930
(500-1000mm) (475-1000mm) (0,6 bar) (6.1 M) (1,5 bar) (1175 mm) (470 mm)
20" - 40" 19"-40" ^8.7 psi 20 ft. 22 psi 46.25" 18.5"
†6" MNP 1/4" & 1/2" 1/2" (2) 106 130-240-6 $3,040
(500-1000mm) (475-1000mm) (0,6 bar) (6.1 M) (1,5 bar) (1175 mm) (470 mm)
21" 19.0"-21.5" 13 psi 30 ft. 25 psi 26" 18.25"
4" FNP 1/4" 1/2" (2) 92 130-221-4 $1,050
24" - 48" 20.5"-50" ^**10 psi 23 ft. 22 psi 76" 20"
†4" MNP 1/2" 5/8" (3) 150 130-248-4 $4,260
24" - 48" 20.5"-50" ^**10 psi 23 ft. 22 psi 76" 20"
†6" MNP 1/2" 5/8" (3) 153 130-248-6 $4,440
24" - 60" 20.5"-60.5" ^**6 psi 14 ft. 22 psi 88" 19.5"
†4" MNP 1/4" & 1/2" 5/8" (3) 205 130-260-4MM $7,820
40" - 60" 38"-60" ^**8.7 psi 20 ft. 25 psi 73" 37.25"
†4" MNP 1/4" & 1/2" 1/2" (4) 350 130-260-4M $8,140
24" - 60" 20.5"-60.5" ^**6 psi 14 ft. 22 psi 88" 19.5"
†6" MNP 1/4" & 1/2" 5/8" (3) 205 130-260-6 $8,120
48" - 72" 44"-72" ^6 psi 14 ft. 12 psi 100" 43"
†4" MNP 1/2" (2) 5/8" (3) 298 130-272-4 $9,740
48" - 72" 44"-72.25" ^6 psi 14 ft. 12 psi 93" 43.75"
†6" MNP 1/2" (2) 5/8" (3) 298 130-272-6 $10,260
48" - 72" 44"-72.25" ^6 psi 14 ft. 12 psi 93" 43.75"
†8" MNP 1/2" (2) 5/8" (3) 298 130-272-8 $10,570
54" - 96" 54"-96" ^6 psi 14 ft. 11 psi 128" 50"
†4" MNP 1/2" (2) 5/8" (3) 500 130-296-4 $13,490
54" - 96" 54"-96" ^6 psi 14 ft. 11 psi 135" 46"
†6" MNP 1/2" (2) 3/4" (3) 500 130-296-6 $13,710
(1400-2400mm) (1400-2450 mm) (0,41 bar) (4.3 M) (0,75 bar) (3429mm) (1169mm)
54"-96" 54"-96" ^6 psi 14 ft. 11 psi 140" 46"
†8" Flange 1/2" (2) 3/4" (3) 510 130-296-8 $13,980
(1400-2450 mm) (1400-2450 mm) (0,41 bar) (4.3 M) (0,75 bar) (3556mm) (1169mm)
** See chart next page for full pressure range.

Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Municipal Style, Pipe Sizes: 1.5" to 96", 130-2 Series (Continued)
Air Pressure Ratings
PIPE DIAMETER
15" 18" 21" 24" 30" 36" 42" 48" 54" 60"
Plug Size
13 psi 13 psi 11 psi 11 psi
15"-30" 17 psi(1,2 bar)
(0,9 bar) (0,9 bar) (0,76 bar) (0,76 bar)
15 psi 13 psi 11 psi 9 psi
24"-42"
(1,0 bar) (0,9 bar) (0,76 bar) (0,62 bar)
15 psi 13 psi 12 psi 11 psi 10 psi
24"-48"
(1,0 bar) (0,9 bar) (0,83 bar) (0,76 bar) (0,7 bar)
15 psi 15 psi 15 psi 13 psi 12 psi 10 psi
30"-60"
(1,0) (1,0) (1,0) (0,9 bar) (0,83 bar) (0,7 bar)
15 psi 13 psi 11 psi 8.7 psi
40"-60"
(1,0) (0,9 bar) (0,76 bar) (0,6 bar)
Head Pressure Ratings

PIPE DIAMETER
15" 18" 21" 24" 30" 36" 42" 48" 54" 60"
Plug Size
40 ft. 30 ft 30 ft. 25 ft. 25 ft.
15"-30"
(12 M) (9.1 M) (9.1 M) (7.6 M) (7.6 M)
35 ft. 30 ft. 25 ft. 20 ft.
24"-42"
(11 M) (9.1 M) (7.6 M) (6.1 M)
35 ft 30 ft. 28 ft. 25 ft. 23 ft.
24"- 48"
(11 M) (9.1 M) (8.4 M) (7.6 M) (7 M)
35 ft 35 ft. 35 ft. 30 ft. 28 ft. 23 ft.
30"-60"
(11 M) (11 M) (11 M) (9.1 M) (8.4 M) (7 M)
35 ft. 30 ft. 25 ft. 20 ft.
40"-60"
(11 M) (9.1 M) (7.6 M) (6.1 M)
^Rupture Disk †Flexible Bypass MNP - Male Na onal Pipe Thread FNP - Female Na onal Pipe Thread
Remote Placement Accessories

Shpg
Unit
Description Wt Item Number
Price Each
lbs
6' Remote Placement Pole 4 924-1307-72 $42.40
Remote Placement Pole Adapter (1¼" M NPT) 1 924-1307-0125 $55.10
1½" Remote Placement Municipal Style Muni-Ball® Adapter 4 924-1307-015 $138.00
2" Remote Placement Municipal Style Muni-Ball® Adapter 4 924-1307-02 $145.00
1" - 1½" Remote Placement Adapting Bushing 1 924-1307-01015 $11.54
3/4" - 1½" Remote Placement adapters - include 3/4" M
1 924-1307-007515 $14.64
NPT nipple and 3/4" F - 1-1/2" F NPT Bushing
2" - 1½" Remote Placement Reducer Bushing 1 924-1307-02015 $22.40
3" - 2" Remote Placement Reducer Bushing 2 924-1307-0302 $33.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Municipal Style Test, Kevlar® Reinforced Rubber With By-Pass,
Pipe Sizes: 3" to 72", 136-0 Series
Pneumatic molded rubber plugs for testing residential and commercial plumbing systems
These plugs are reinforced with Kevlar® tire cording and molded of special NR-
SBR rubber. Due to their light weight and short length, these plugs are easy to
handle even in large diameter sizes. All plugs are equipped with a 1/4" male
quick-connect inflation port. Reinforcement sleeves are available for heavy duty
use. They are available with a standard and large by-pass.
Large By-Pass Plugs are used primarily for sewage flow. The optional threaded
aluminum by-pass flange is field replaceable and by-pass sizes can usually be
resized to suit needs. Optional field
replaceable rubber sleeve and non-corrosive,
rigid PPH by-pass lining.
Removable flanges included
Pipe Diameter By-Pass Plug Required **Pipeline Shpg

Valve
Maximum Minimum Size Diameter Inflation Max. Head Type Eye Bolt Size Deflated Length Wt Unit
in npt^ lbs Item Price
in mm in mm in mm psig ft m in QC in mm in mm Number Each
Multi-Size Municipal Plugs With Standard By-Pass
1/2”, 1” or 2” bypass diameters threaded both ends, 4” bypasses threaded the top only
6 153 3 76 1/2 F 2.7 68 36 34 10.4 1/4 M 0.24 6 13.75 350 4 136-006-8 $258
8 203 3.63 92 1F 3.5 89 36 34 10.4 1/4 M 0.24 6 23 584 8 136-008-81 $386
12 305 5.63 143 1F 5.5 140 36 34 10.4 1/4 M 0.32 8 25 635 12 136-012-81 $495
16 406 7.5 190 2F 7.38 187 36 34 10.4 1/4 M 0.32 8 25 635 20 136-016-8215 $707
21 533 10.75 273 2F 10.5 267 36 34 10.4 1/4 M 0.32 8 26 660 30 136-021-82 $814
24 610 13 330 2F 12.5 318 36 34 10.4 1/4 M 0.39 10 35 889 40 136-024-82 $1,436
30 762 14 356 2F 13.5 343 36 34 10.4 1/4 M 0.39 10 44 1118 50 136-030-82 $1,698
30 762 15 381 4F 13.75 350 22 16 4.9 1/4 M 0.39 10 55 1397 84 136-030-84 $2,218
40 1016 19 483 2F 18.5 470 22 16 4.9 1/4 M 0.39 10 48 1219 80 136-040-82 $2,785
48 1219 23 584 4F 23 584 22 16 4.9 1/4 M 0.39 10 64 1626 113 136-048-84 $3,321
60 1524 25 635 4F 23.5 597 15 13 4 1/4 M 0.39 10 97 2464 180 136-060-84 $7,089
72 1828 32 812 4F 23.6 599 15 13 4 1/4 M 0.39 10 116.5 2960 233 136-072-84 $9,308
Continued next page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Municipal Style Kevlar® Reinforced Rubber With By-Pass,
Pipe Sizes: 3" to 72", 136-0 (Continued)
Pneumatic molded rubber plugs for testing residential and commercial plumbing systems
Pipe Diameter Plug Required **Pipeline

Valve
Maximum Minimum By-Pass Diameter Inflation Max. Head
Size Type Eye Bolt Size Deflated Length Shpg Unit
in npt^ Wt Item Price
in mm in mm in mm psig ft m in QC in mm in mm
lbs Number Each
Multi-Size Municipal Plugs With Large By-Pass
Threaded only on the top
6 153 4 102 2 M 3.8 97 36 34 10.4 1/4 M 0.24 6 24 610 6 136-006-82 $494
10 254 6 153 2 M 5.8 148 29 27 8.2 1/4 M 0.24 6 24 610 11 136-010-82 $599
10 254 6 153 3 M 5.8 148 29 27 8.2 1/4 M 0.24 6 24 610 11 136-010-83 $612
12 305 6 153 2 M 5.6 143 22 16 4.9 1/4 M 0.32 8 26 661 10 136-012-8207 $500
12 305 8 203 2 M 7.8 199 29 27 8.2 1/4 M 0.24 6 27 686 19 136-012-8212 $673
16 406 7.5 191 2 M 7.25 185 22 16 4.9 1/4 M 0.24 6 31 788 17 136-016-8207 $754
16 406 7.5 191 4 M 7.25 185 22 16 4.9 1/4 M 0.24 6 31 788 17 136-016-84 $789
21 533 12 305 4 M 11.6 295 29 27 8.2 1/4 M 0.32 8 34 864 41 136-021-84 $1,582
21 533 12 305 6 M 11.6 295 29 27 8.2 1/4 M 0.32 8 34 864 41 136-021-86 $1,607
24 610 14 356 4 M 12.7 323 22 16 4.9 1/4 M 0.39 10 39 991 44 136-024-84 $1,587
24 610 14 356 6 M 12.5 318 22 16 4.9 1/4 M 0.32 8 39 991 47 136-024-86 $1,619
40 1016 20 508 4 M 18.6 473 22 16 4.9 1/4 M 0.39 10 53 1347 92 136-040-84 $2,791
40 1016 20 508 6 M 18.6 473 22 16 4.9 1/4 M 0.39 10 53 1347 92 136-040-86 $2,829
40 1016 20 508 8 M* 18.6 473 22 16 4.9 1/4 M 0.39 10 53 1347 92 136-040-88 $2,858
48 1219 24 610 6 M 22.6 574 22 16 4.9 1/4 M 0.47 12 57 1450 143 136-048-86 $4,794
48 1219 24 610 8 M* 22.6 574 22 16 4.9 1/4 M 0.47 12 57 1450 155 136-048-88 $5,151
60 1524 30 762 6 M 23.6 599 15 13 4 1/4 M 0.47 12 90.5 12300 198 136-060-86 $8,018
60 1524 30 762 8 M* 23.6 599 15 13 4 1/4 M 0.47 12 90.5 2300 214 136-060-88 $8,507
72 1828 32 812 6 M 23.6 599 15 13 4 1/4 M 0.47 12 116.5 2960 276 136-072-86 $11,286
72 1828 32 812 8 M* 23.6 599 15 13 4 1/4 M 0.47 12 116.5 2960 295 136-072-88 $11,778
*Most of these by-pass (flow-thru) plugs come complete with standard schedule 40 PVC caps (except 8"). 8" by-pass
plugs requires schedule in80 PVC caps and are not included for economical reasons. Order 8" caps separately if
required (extra charge $150.00). Plug includes the removable flange.
^Plugs with a 1/2" to 2" FNPT bypass are threaded both ends, all other plugs only inflation end.
See 936-series for protective sleeves.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Low Pressure Gas Type, Pipe Sizes: 1" to 48", 154 Series
100% Polyester fabric cover, nitrile bladder

Gas plugs consists of an inner bladder made of a high quality nitrile encased in a 100% Polyester fabric cover. The gauge of rubber and polyester
vary with the size of the plug. Each size plug is expertly made to insure a snug fit and good shut-off when inflated. An inflation valve is standard
with each bag: a pressure gauge is recommended and can be furnished at an additional cost.
Pipe Diameter Size of Maximum Pressure** Shpg Unit
Nominal Tap Hole Inflation Test Head Inflation Wt Item Price
in mm in mm psig bar ft m Port lbs Number Each
2 51 1 25 15 1.03 1 0.3 tire 1 154-002-G $83
3 76 1 25 15 1.03 1 0.3 tire 1 154-003-G $83
4 102 1.25 32 15 1.03 1 0.3 tire 1 154-004-G $90
6 152 1.5 38 15 1.03 1 0.3 tire 1 154-006-G $119
8 203 2 51 12 0.83 1 0.3 tire 2 154-008-G $150
10 254 2 51 10 0.69 0.75 0.23 tire 2 154-010-G $189
12 305 2.5 64 8 0.55 0.75 0.23 tire 2 154-012-G $225
14 356 2.5 64 6 0.41 0.5 0.15 tire 3 154-014-G $348
16 406 3 76 6 0.41 0.5 0.15 tire 5 154-016-G $441
18 457 3 76 5 0.34 0.5 0.15 tire 6 154-018-G $537
20 508 4 102 5 0.34 0.5 0.15 tire 7 154-020-G $618
24 610 4 102 3 0.21 0.5 0.15 tire 13 154-024-G $845
30 762 5 127 3 0.21 0.25 0.08 tire 18 154-030-G $1,073
36 914 5 127 3 0.21 0.25 0.08 tire 23 154-036-G $1,970
42 1067 6 152 1 0.07 0.25 0.08 tire 26 154-042-G $3,195
48 1219 6 152 1 0.07 0.25 0.08 tire 35 154-048-G $4,158 Left - end fitting detail
Deflated diameter is the diameter of pipe that plug may be inserted through
to plug a pipeline.
Directional Gas Plugs 3" to 24" Diameter

The construction of the Directional Gas Plug is similar to traditional plugs but are made with
a gum rubber bladder and have a nylon cover. These plugs have an internal, curved flexible
nylon tube that enables the user to direct the gas bag either upstream or downstream. This
directional capability makes for easier insertion into the main.
Includes brass stem, gauge, petcock, valve, and black rubber plug .
Pipe Diameter Size of Maximum Pressure** Shpg Unit

Nominal Tap Hole Inflation Test Head Inflation Wt Item Price
in mm in mm psig bar ft m Port lbs Number Each
3 76 1 25 10 0.69 0.75 0.23 tire 1 154-003-DR $175
4 102 1 25 9 0.62 0.75 0.23 tire 1 154-004-DR $182
6 152 1.25 32 7 0.48 0.5 0.15 tire 1 154-006-DR $189
8 203 2 51 6 0.41 0.5 0.15 tire 2 154-008-DR $209
10 254 2 51 4 0.28 0.25 0.08 tire 2 154-010-DR $260 Gas main line pressure must not exceed 12 in. w.c.
12 305 2.5 64 4 0.28 0.25 0.08 tire 2 154-012-DR $267
16 406 3 76 3 0.21 0.25 0.08 tire 5 154-016-DR $441 Do not inflate plugs over the above pressures.
20 508 4 102 2 0.14 0.25 0.08 tire 7 154-020-DR $1,025
24 610 4 102 2 0.14 0.25 0.08 tire 13 154-024-DR $1,203
Pressure Gauge for Gas Plugs
0 to 30 psi, 1/8" npt fitting 1 930-7163 $36

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Stack Test Rubber, Pipe Sizes: 1.5" to 6", 130-1 Series
Designed for stack testing of drain, waste, and vent plumbing systems
These plugs thread into a standard test tee. Inflate the bladder and introduce water into the pipe. When testing is completed, deflate the plug and
the water will travel down the pipe, eliminating test water backsplash.
Inflated (test) Deflated (test release)
● Works in both plastic and cast-iron test tees

● Natural rubber body provides a leak-free seal
● High impact ABS threads for maximum durability
● Removable/replaceable tire inflation valve fitting
● Always block plugs when conducting air tests.
**Pipeline Maximum Allowable Back Pressure

Required Deflated Shpg Unit
Nominal Size Head Pressure Air Pressure Item
Inflation Length Dia Wt Price
Number
in mm psig ft m psi bar in mm in mm lbs Each
1.5 40 30 30 9.1 13 0.9 4.75 121 1.5 38 1 130-1015 $31.10
2 50 35 30 9.1 13 0.9 5.81 150 2.38 60 1 130-1020 $34.00
3 75 35 30 9.1 13 0.9 7.38 188 3.5 89 1 130-1030 $36.90
4 100 35 30 9.1 13 0.9 8.5 215 4.5 115 2 130-1040 $42.70
6 150 25 30 9.1 13 0.9 11 280 6.63 168 4 130-1060 $107.10

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Pillow Style Muni-Balls, Pipe Sizes: 15” to 66”, 130-9 Series
Great for sewer flow and sewer air testing
Petersen's Pillow-Style Test-Ball® and Muni-Ball® plugs are great for blocking sewer flow and can also be used for sewer air testing. Made from
heavy-duty elastic urethane, these plugs are lightweight, flexible, chemical and petroleum-resistant, and will fit through small-diameter openings.
Pillow-style plugs can be tethered with the attached tether bars, and will work in all types of pipe, including ductile iron sizes.
● Equipped with a special 30' inflation hose, 30’ read-back line, and gauge
● A repair kit is available to fix small tears and punctures
● Muni-Ball® style plugs feature a bypass with threaded nipples on both ends
● Made with heavy-duty Urethane rubber
Size Maximum Shpg

Range of Back Inflation Deflated Deflated Inflation Wt Item Unit Price
Nominal Size Use Pressure** Pressure Length Diameter Thread lbs Number Each
Pillow Style Test-Ball (without by-pass)
*15" 14.7"-15.5" 15 psi 35 ft. 35 psi 43" 12"
1/4" (1) 15 130-915 $1,140
(375 mm) (373-394 mm) (1 bar) (11 M) (2,4 bar) (110 mm) (305 mm)
*18" 17.8"-18.8" 15 psi 35 ft. 30 psi 43" 12"
1/4" (1) 20 130-918 $1,170
(450 mm) (451-477 mm) (1 bar) (11 M) (2,1 bar) (110 mm) (305 mm)
30 ft.
*20" 19.6"-20.7" 13 psi 18 psi 43" 12"
(9.1 1/4" (1) 21 130-920 $1,350
(500 mm) (498-526 mm) (0,9 bar) (1,24 bar) (110 mm) (305 mm)
M)
30 ft.
*21" 20.6"-21.8" 13 psi 18 psi 43" 12"
(9.1 1/4" (1) 21 130-921 $1,360
(525 mm) (523-554 mm) (0,9 bar) (1,24 bar) (110 mm) (305 mm)
M)
25 ft.
*24" 235"-25.2" 11 psi 18 psi 66" 12"
(7.6 1/4" (1) 32 130-924 $1,510
(600 mm) (598-641 mm) (0,76 bar) (1,24 bar) (1700 mm) (305 mm)
M)
25 ft.
*27" 26.5"-28.2" 11 psi 18 psi 66" 12"
(7.6 1/2" (1) 35 130-927 $1,640
(700 mm) (672-717 mm) (0,76 bar) (1,24 bar) (1700 mm) (305 mm)
M)
25 ft.
30" 29.4"-31.25" 11 psi 18 psi 66" 12"
(7.6 1/2" (1) 40 130-930 $1,900
(750 mm) (747-794 mm) (0,76 bar) (1,24 bar) (1700 mm) (305 mm)
M)
20 ft.
33" 32.3"-34.25" 8.7 psi 13 psi 95" 12"
(6.1 1/2" (1) 41 130-933 $2,210
(850 mm) (819-870 mm) (0,61 bar) (0,9 bar) (2413 mm) (305 mm)
M)
20 ft.
36" 35.3"-37.5" 8.7 psi 13 psi 95" 12"
(6.1 1/2" (1) 60 130-936 $2,510
(900 mm) (896-953 mm) (0,61 bar) (0,9 bar) (2413 mm) (305 mm)
M)
41.2"-43.7" 18 ft.
42" 7.8 psi 12 psi 95" 12"
(1045-1111 (5.5 1/2" (1) 58 130-942 $2,840
(1100 mm) (0,55 bar) (0,83 bar) (2413 mm) (305 mm)
mm) M)
Continued next page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Pillow Style Muni-Balls, Pipe Sizes: 15” to 66”, 130-9 Series (Continued)
Great for sewer flow and sewer air testing
47.04"-50"
48" 5.6 psi 13 ft. 12 psi 95" 12"
(1195-1270 1/2" (1) 62 130-948 $3,200
(1200 mm) (0,4 bar) (4 M) (0,83 bar) (2413 mm) (305 mm)
mm)
52.92"-56"
54" 5.6 psi 13 ft. 10 psi 95" 16"
(1344-1422 1/2" (1) 64 130-954 $3,680
(1400 mm) (0,4 bar) (4 M) (0,7 bar) (2413 mm) (381 mm)
mm)
58.8"-62"
60" 5.6 psi 13 ft.
(1494-1575 10 psi(0,7 bar) 126"(3200 mm) 16"(381 mm) 1/2" (1) 86 130-960 $4,300
(1500 mm) (0,4 bar) (4 M)
mm)
64.7"-68" 8 ft.
66" 3.5 psi 8 psi 126" 16"
(1643-1727 (2.4 1/2" (1) 87 130-966 $4,880
(1700 mm) (0,24 bar) (0,55 bar) (3200 mm) (381 mm)
mm) M)
*15"- 27" pillow style plugs have standard snifter valve air connection.
Large single-size plugs are not suitable for leak location or vacuum testing.
Always block plugs when conducting air tests.
Custom sizes also available

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Inflatable, Pillow Type Municipal Style Kevlar® Reinforced With & W/) By-Pass,
These plugs are ideal for large diameter pipes or where access to the pipe is limited
Pillow Plugs are ideal for large pipes when access is limited. When deflated they may be folded up and inserted through a standard manhole and
then inflated. Standard sizes range from 2' up to 9' diameter, with or without by-pass for testing or flow through. A Pillow Plug can generally be
inserted through an opening 1/3 the diameter of the pipe.
Made of Kevlar® reinforced *NR-SBR rubber compound.

Equipped with standard 1/4" quick connect coupler.
Pipe Diameter Maximum Pipeline Deflated Deflated

Maximum Minimum Inflation Max Head Width Length Shpg Unit
By-Pass Wt Item Price
in mm in mm Size psig bar ft m in mm in mm lbs Number Each
Multi-Size Pneumatic Pillow Shape Sealing Plugs Without By-Pass
40 1000 24 600 14.5 1 22.7 6.9 36.4 924 84 2133 40 135-040 $2,612
48 1200 32 800 13 0.9 19.4 5.9 49.2 1249 100 2540 64 135-048 $3,468
64 1600 48 1200 11.5 0.8 16.2 4.9 73.2 1859 128 3251 112 135-064 $6,411
80 2000 64 1600 8.6 0.6 13 4 98 2489 160 4064 189 135-080 $7,752
88 2235 75 1905 7.2 0.5 9.8 3 115 2921 192 4876 396 135-088 $10,496
96 2438 96 2438 7.2 0.5 9.8 3 147 3734 221 5613 548 135-096 $13,923
108 2743 108 2743 5.8 0.4 9.8 3 166 4216 264 6706 726 135-108 $18,207
Multi-Size Pneumatic Pillow Shape Sealing Plugs With By-Pass
40 1000 24 600 2" 14.5 1 22.7 6.9 36.8 934 76 1900 51 135-040-8 $3,175
48 1200 32 800 2" 13 0.9 19.4 5.9 50 1270 92 2300 75 135-048-8 $4,230
64 1600 48 1200 2" 11.5 0.8 16.2 4.9 74.8 1899 114 2850 125 135-064-8 $7,712
80 2000 64 1600 2" 8.6 0.6 13 4 100 2540 148 3700 202 135-080-8 $8,997
88 2235 75 1905 2" 7.2 0.5 9.8 3 115 2921 192 4876 425 135-088-8 $13,388
96 2438 96 2438 2" 7.2 0.5 9.8 3 147 3734 221 5613 576 135-096-8 $17,672
108 2743 108 2743 2" 5.8 0.4 9.8 3 166 4216 264 6706 755 135-108-8 $25,276

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Packer Carriers, Inflatable, MULTI-FLEX®, Pipe Sizes: 3 1/2" and Larger, 118 / 119 Series
Flow-Thru and Flexibility Speeds Point Repair

Flexibility allows Carrier Packer to navigate through manhole into pipeline;
then inflate with air, hot water or steam.
● High Strength Flexible Materials: Inflatable Line Stop™ MULTI-FLEX® Packers are made
from very high strength flexible woven and non-woven Nylon reinforced EPDM covers.
Connections are available for air, hot water, steam inflation, and recirculation.
● Smooth, Even Relining: The PETERSEN® Packer has a fixed inflated diameter
independent of the pipeline. This allows for a smooth repair with a constant diameter
unlike rubber packers that generally follow the contour of the broken area of the
pipeline causing an irregular I.D. Repair.
● Air, Hot Water or Steam: Packers can be fitted with connections for use with
circulating hot water, steam or ambient cure with air or water.
● Easy Installation and Removal: Small deflated diameter, light weight, and flexibility
allow installation of long MULTI-FLEX® Packers through a small opening or manhole.
Removal after deflating is just as easy.
● Flow-Thru: The by-pass design allows flow through the MULTI-FLEX® Packer during repairs.
● Light Weight: PETERSEN® MULTI-FLEX® Packers are much lighter than molded rubber packers for easy placement.
Packers/Carriers Without By-Pass

Pipe Diameter Maximum **Pipeline Minimum Deflated
Inflation Unit
Shpg
Maximum Minimum Inflation Max. Head Contact Port* Length Item Price
Wt
in mm in mm psig bar ft m ft in npt in mm lbs Number Each
4 102 3.5 89 25 1.7 28 8.8 6 3/4 M - 1/4 QC 84 2134 24 118-004-06 $501
6 152 5 127 25 1.7 28 8.8 6 1 M - 1/4 QC 86 2184 26 118-006-06 $629
8 203 5 127 25 1.7 28 8.8 8 2 M - 1/4 QC 112 2845 29 118-008-08 $1,010
10 254 5 127 25 1.7 28 8.8 8 2 M - 1/4 QC 114 2896 32 118-010-08 $1,188
12 305 5 127 25 1.7 28 8.8 8 2 M - 1/4 QC 124 3150 35 118-012-08 $1,267
15 381 5 127 25 1.7 28 8.8 8 2 M - 1/2 QC 127 3226 40 118-015-08 $1,301
16 406 5 127 25 1.7 28 8.8 8 2 M - 1/2 QC 128 3251 41 118-016-08 $1,383
18 457 5 127 25 1.7 28 8.8 8 2 M - 1/2 QC 130 3302 47 118-018-08 $1,622
20 508 6 152 25 1.7 28 8.8 8 2 M - 1/2 QC 132 3352 52 118-020-08 $1,802
24 610 6 152 25 1.7 28 8.8 8 3 M - 1/2 QC 136 3454 62 118-024-08 $2,049
27 686 7 178 22 1.5 25 7.7 8 3 M - 1/2 QC 139 3531 76 118-027-08 $2,707
30 762 7 178 20 1.4 23 7 8 3 M - 1/2 QC 142 3607 89 118-030-08 $3,369
33 838 7 178 20 1.4 23 7 8 3 M - 1/2 QC 145 3683 94 118-033-08 $3,553
36 914 8 203 18 1.2 20 6.3 8 3 M - 1/2 QC 148 3759 117 118-036-08 $3,732
42 1067 8 203 14 1 16 4.9 8 3 M - 1/2 QC 154 3912 138 118-042-08 $5,475
48 1219 10 254 10 0.7 11 3.5 8 3 M - 1/2 QC 166 4216 182 118-048-08 $6,225
Continued next page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Packer Carriers, Inflatable MULTI-FLEX®, Pipe Sizes: 3 1/2" and Larger, 118 / 119 Series (Continued)
Flow-Thru and Flexibility Speeds Point Repair
Packers/Carriers With By-Pass (Flow-Thru)

Pipe Diameter By-Pass Maximum **Pipeline Minimum Inflation Deflated Shpg Unit
Item
Maximum Minimum Connection Inflation Max. Head Contact Port* Length Wt Price
Number
in mm in mm in npt psig bar ft m ft in npt in mm lbs Each
4 102 3.5 89 2M 25 1.7 28 8.8 6 1/4 F - 1/4 QC 84 2134 28 119-004-06 $818
6 152 5 127 2M 25 1.7 28 8.8 6 1/4 F - 1/4 QC 86 2184 35 119-006-06 $901
8 203 6 127 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 112 2845 60 119-008-08 $1,624
10 254 5 127 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 114 2896 64 119-010-08 $1,820
12 305 5 127 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 124 3150 70 119-012-08 $1,956
15 381 5 127 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 127 3226 80 119-015-08 $2,074
16 406 5 127 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 128 3251 82 119-016-08 $2,127
18 457 5 127 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 130 3302 92 119-018-08 $2,493
20 508 6 152 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 132 3352 102 119-020-08 $2,770
24 610 8 203 3M 25 1.7 28 8.8 8 3/8 F - 1/2 QC 136 3454 112 119-024-08 $3,147
27 686 10 254 3M 22 1.5 25 7.7 8 3/8 F - 1/2 QC 139 3531 132 119-027-08 $3,624
30 762 10 254 3M 20 1.4 23 7 8 3/8 F - 1/2 QC 142 3607 151 119-030-08 $4,074
33 838 10 254 3M 20 1.4 23 7 8 3/8 F - 1/2 QC 145 3683 158 119-033-08 $4,462
36 914 12 305 3M 18 1.2 20 6.3 8 3/8 F - 1/2 QC 148 3759 210 119-036-08 $5,277
42 1067 12 305 3M 14 1 16 4.9 8 3/8 F - 1/2 QC 154 3912 460 119-042-08 $6,463
48 1219 15 381 3M 10 0.7 11 3.5 8 3/8 F - 1/2 QC 166 4216 526 119-048-08 $7,405
Custom configurations also available

Hot Water or Steam Packer: Maximum 220 degree F, Add 25% to price
and add Suffix "S" to item number
Grout Packer: Add suffix "G" - Call for pricing
*QC Quick connection.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Packer Carriers, Inflatable Tee Type Lateral Joint MULTI-FLEX®, Pipe Sizes: 4" to 24", 116 Series
Deflates to small flexible size for easy insertion

Other Sizes and Configurations also available
● High Strength Flexible Materials: Inflatable Line Stop™ MULTI-FLEX® Packers are made from very high strength Nylon reinforced EPDM.
Connections are available for air, hot water, steam inflation, and recirculation.
● Smooth, Even Relining: The PETERSEN® Packer has a fixed inflated diameter
independent of the pipeline. This allows for a smooth repair with a constant
diameter unlike rubber packers that generally follow the contour of the broken
area of the pipeline causing an irregular I.D. repair.
● Air, Hot Water or Steam: Packers can be fitted with connections for use with
circulating hot water, steam or ambient cure with air or water.
● Easy Installation and Removal: Small deflated diameter, light weight, and
flexibility allow installation of long MULTI-FLEX® Packers through a small opening.
Removal after deflating is just as easy.
● Flow-Thru: The by-pass design allows flow through the MULTI-FLEX® Packer
during repairs.
● Light Weight: PETERSEN® MULTI-FLEX® Packers are much lighter than molded rubber packers for easy placement.
Main Line Lateral Line

Maximum Contact Maximum Contact Maximum Pipeline Inflation Shpg Unit
Diameter Length Diameter Length Inflation Max. Head* Port Wt Item Price
in mm in mm in mm in mm psig bar ft m (QC) lbs Number Each
90 Degree Lateral
4 102 16 406 2 51 16 406 25 1.7 28 8.8 1/4" 6 116-0402-901616 $1,302
6 152 18 457 4 102 24 610 25 1.7 28 8.8 1/4" 8 116-0604-901824 $1,512
8 203 24 610 4 102 32 812 25 1.7 28 8.8 1/4" 10 116-0804-902432 $1,974
10 254 40 1016 4 102 40 1016 25 1.7 28 8.8 1/4" 12 116-1004-904040 $2,363
12 305 48 1219 6 152 48 1219 25 1.7 28 8.8 1/4" 14 116-1206-904848 $2,762
18 457 48 1219 6 152 48 1219 25 1.7 28 8.8 1/4" 18 116-1806-904848 $3,371
24 610 48 1219 6 152 48 1219 25 1.7 28 8.8 1/4" 20 116-2406-904848 $4,064
45 Degree Lateral
4 102 16 406 2 51 16 406 25 1.7 28 8.8 1/4" 6 116-0402-451616 $1,439
6 152 18 457 4 102 24 610 25 1.7 28 8.8 1/4" 8 116-0604-451824 $1,670
8 203 24 610 4 102 32 812 25 1.7 28 8.8 1/4" 10 116-0804-452432 $2,174
10 254 40 1016 4 102 40 1016 25 1.7 28 8.8 1/4" 12 116-1004-454040 $2,599
12 305 48 1219 6 152 48 1219 25 1.7 28 8.8 1/4" 14 116-1206-454848 $3,056
18 457 48 1219 6 152 48 1219 25 1.7 28 8.8 1/4" 18 116-1806-454848 $3,717
24 610 48 1219 6 152 48 1219 25 1.7 28 8.8 1/4" 20 116-2406-454848 $4,473
Advise position of lateral on main line

Nylon loops on each of three ends for positioning
*QC Quick connection.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Packer Carriers, Inflatable Point Repair, Pipe Sizes: 4" to 12", 130-5 Series
Well suited for most point repair systems
These Point Repair Carriers are well-suited for most point repair systems. Available for pipe sizes 4" to 12", these carriers are known for both their
durability and reliability. Custom lengths are available upon request.
Features for all sizes:
● Made of aramid corded natural rubber: extremely durable and flexible
● Flexible: All units can fold in half for transport
● 1/4” NPT Inflation Port with male quick disconnect for ease of connection
Features on 6"-10" and 8"-12":
● Integrated cage/wheel assembly for ease of movement down the pipe
● Bypass design allows sewage bypass during repair
● Unique centered inflation port for use with push rod inflation poles
● Wire harness keeps unit centered in pipe
● 2" FPT bypass allows for continuous sewer flow
Made by Cherne
Approx. Contact
Length Length Max Pipe Diameter Deflated Diameter Inflation Pressure* Shpg Wt lbs Item Number Unit Price Each
Multi-Size Point Repair Carriers For 4" - 6" Diameter
5' 52" 6.25" 2.60" 50 PSI (3,4 bar) 8 130-50406-05 $550
8' 88" 6.25" 2.60" 50 PSI (3,4 bar) 10 130-50406-08 $689
10' 112" 6.25" 2.60" 50 PSI (3,4 bar) 11 130-50406-10 $827
12' 136" 6.25" 2.60" 50 PSI (3,4 bar) 14 130-50406-12 $992
15' 172" 6.25" 2.60" 50 PSI (3,4 bar) 17 130-50406-15 $1,110
5' 48" 10.25" 4.63" 25 PSI (1,7 bar) 23 130-50610-05 $1,340
8' 84" 10.25" 4.63" 25 PSI (1,7 bar) 30 130-50610-08 $1,670
10' 108" 10.25" 4.63" 25 PSI (1,7 bar) 35 130-50610-10 $2,030
12' 132" 10.25" 4.63" 25 PSI (1,7 bar) 40 130-50610-12 $2,350
15' 168" 10.25" 4.63" 25 PSI (1,7 bar) 47 130-50610-15 $2,680
5' 48" 12.25" 5.80" 25 PSI (1,7 bar) 33 130-50812-05 $1,450
8' 84" 12.25" 5.80" 25 PSI (1,7 bar) 40 130-50812-08 $1,790
10' 108" 12.25" 5.80" 25 PSI (1,7 bar) 45 130-50812-10 $2,120
12' 132" 12.25" 5.80" 25 PSI (1,7 bar) 50 130-50812-12 $2,460
15' 168" 12.25" 5.80" 25 PSI (1,7 bar) 56 130-50812-15 $2660

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Test Equipment, Leak Detector Pressure Accessories, 924-1304 Series
Used for testing sewer pipe installations
The Leak Detector Low Pressure Air-Testing System has been successfully used for testing sewer pipe installations for over 40 years. This method of
testing pipelines has proven to be the fastest, most economical, and accurate method of testing pipe. It allows you to perform tests as prescribed
by ASTM C 828, C 924, and F 1417.
Leak Detector Line Acceptance Kit

The Line Acceptance Kit is used to perform low pressure air tests (up to 10 psi) on newly installed sewer lines. The Line Acceptance Kit includes the
control panel, 50' triple hose, and a storage container. Not included in kit is an air compressor and pipe plugs.
Unit Pric
Description Shpg Wt lbs Item Number Each
Leak Detector Line Acceptance Kit (does not include plug or air compressor) 75 924-1304-K $2284
Leak Detector Conversion Kit Features: Equipped with:

● Converts Municipal Style Muni-Ball® plugs to air test plugs ● Colored discs coded to hose connections
● Available for line acceptance and/or leak location tests ● Conversion set up instructions
Continued next page


Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Test Equipment, Leak Detector Pressure Testing Panel, 924-1304 Series (Continued)
Hi-Flow® Line Acceptance Conversion Kits (3/8" and 3/4" fittings)

Unit Price
2" MNPT Plug Conversion Kit 4 924-1304-8200M $111.00
2" FNPT Cap Conversion Kit 4 924-1304-8200 $60.80
2½" FNPT Cap Conversion Kit 3 924-1304-8250 $67.90
4" FNPT Cap Conversion Kit 7 924-1304-8400 $104.00
6" FNPT PVC Cap Conversion Kit 3 924-1304-8600 $106.00
Line Acceptance / Leak Location Conversion Kits (3/8" fittings)

Unit Price
¾" MNPT Plug Conversion Kit with quick-disconnect fittings 2 924-1304-9075M $82.50
1½" MNPT Plug Conversion Kit with quick-disconnect fittings 3 924-1304-9150M $99.50
2" MNPT Plug Conversion Kit with quick-disconnect fittings 4 924-1304-9200M $102.00
2" FNPT Cap Conversion Kit with quick-disconnect fittings 4 924-1304-9200 $52.20
2½" FNPT Cap Conversion Kit with quick-disconnect fittings 3 924-1304-9250 $60.80
4" FNPT Cap Conversion Kit with quick-disconnect fittings 7 924-1304-9400 $92.20
Leak Detector Pressure Testing Panel

Panel includes gauges to monitor compressor pressure, plug pressure, and test pressure, all in a
sturdy steel case with a durable powder-coat enamel finish. Panel also has regulators to control
plug and test pressure.
Panel can be used with either 3/8" or 3/4" fill hose, accomplished by simply turning a valve. Panel
is designed to work with air compressors fitted with either crow's foot or standard quick
disconnect fittings
Description Shpg Wt lbs Item Number Unit Price Each

Control Panel - Portable 30 924-1304-6 $1570.00
Replacement Parts for Control Panel
0-10 PSI Test Pressure Gauge - Dampened Movement 1 924-1304-6010 $111.00
0-60 PSI Ball Pressure Gauge 1 924-1304-6060 $40.10
0-160 PSI Compressor Gauge 1 924-1304-6160 $40.10
3-Way Valve 1 924-1304-62 $81.30
Regulator 1 924-1304-63 $35.20
Continued next page


Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Test Equipment, Leak Detector Pressure Hoses, 924-1304 Series (Continued)
Triple Hose Reel

The triple hose reel is used to pull the tandem plug assembly through the sewer line. It's designed to
be mounted to the back of a pickup and features durable color-coded hose, a hose distance counter, a
two way air motor and more. Cherne also offers an economical version of this reel that does not
include the air motor or counter system
Triple Hose
The 3/8" diameter hose assembly is used to connect the Leak Detector Panel to the
front plug. Triple hose is color-coded, making connections easy to understand. Hose
features locking quick disconnects for convenience and safety. Hose also includes
strain relief to protect hose and connections from damage. Hi-Flow™ Triple Hose
available with 3/4" blue test pressure hose for quick exhausting.
Interconnect Hose
The interconnect hose is used to attach the front and back air test plugs when
conducting a leak location test. This hose includes a cable for attaching to the pipe
plugs to take strain off the hose during the leak location process.
Description Shpg Wt lbs Item Number Unit Price Each

25' Triple Hose 10 924-1304-038025 $255
50' Triple Hose 19 924-1304-038050 $379
500' Triple Hose 165 924-1304-038500 $1,730
25' Hi-Flow Triple Hose 9 924-1304-075025 $436
50' Hi-Flow Triple Hose 19 924-1304-075050 $559
22' Interconnect Hose 4 924-1304-038022 $206

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs/Packers, Inflatable, Accessories
Call for additional accessories and adaptors

Shpng Price
Description Wgt lbs Item Number Each
Alarms, Low Pressure Monitoring
Alarm, Audible, Low Pressure, 0-15 psi, 9V DC Battery, 1/4" 936-1325-015
2 $441.00
male & female QC
Alarm, Audible, Low Pressure, 10-90 psi, 9V CD Battery, 1/4" male & female QC 2 936-1325-090 $441.00
Alarm, Audible, Low Pressure, 20-300 psi, 9V CD Battery, 1/4" male & female QC 2 936-1325-300 $441.00
Alarm, Audible, Low Pressure, 20-300 psi, 9V CD Battery, 1” cam and croove coupling
Hose & Rope Assemblies
1/4" 2' 120 psi hose, tire valve 1 936-2025-1002 $9.00
1/4" 6.5' 120 psi hose, tire valve 1 936-2025-1006 $21.00
1/4" 16.5' 120 psi hose, tire valve 2 936-2025-1016 $28.00
3/8" 24' 200 psi hose, 1/4"

4 936-2038-2024 $74.00
male & female QC
3/4" 24' 200 psi hose, 1/2" male & female QC 10 936-2075-3024 $90.00
120" High Temperature SS Braided, ½’ ID 1,180 PSI @ 72F, Flexible, 1/2 NPT Male Fittings, 1/2”
936-5050-0120 $208.00
npt fittings
1" 24' water suction hose, 90 psi, 130ºF, 1" cam &
12 936-2100-5024 $164.00
groove cplg
1 1/2" 24' water suction hose, 110 psi, 140ºF, 1 1/2"

12 936-2150-6024 $320.00
cam & groove cplg
3/4" 24' Poly lift rope with

3 936-3075-3024 $74.00
snap hooks
1/8" 24' 304 Stainless Steel Retrieval Cable with snap hooks
3 936-4013-3024 $161.00
(316 SS cable clamps)

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs/Packers, Inflatable, Accessories, Continued
Shpng Price
Inflation Controllers (Relief Valve and Gauge sold separately)
0-15 PSI adjustable regulator, precision, 1/2" male & female QC 4 936-1050-15 $398.00
0-30 PSI adjustable regulator, precision, 1/2" male & female QC 4 936-1050-30 $398.00
Controller, Inflation Air with adjustable regulator and valve, 0-200 psi, 1/2" male & female QC 5 936-1050-200 $279.00
Controller, Inflation Water/Air with Pump, Reg & Valves, 50 gpm, 0-100 psi, 1" cam & groove cplg 49 936-2150-050 $5204.00
Controller, Inflation Water/Air with Pump, Reg & Valves, 100 gpm, 0-100 psi, 1 1/2" cam & groove
110 936-2150-100 $5371.00
cplg
Pressure monitoring valve assembly with receptacles for gauge & relief valve, 1/4" male & female
4 936-2300-025 $79.00
QC
Vacuum Generator, Venturi, 80psi operating pressure, 1/2" male & female QC 8 936-1201 $476.00
Miscellaneous
Inflation Hand Pump with gauge 0 to 60 psi 5 937-6001 $52.20
Repair Kit for MULTI-FLEX® Plugs 15 937-5100 $153.00
Tank, Portable Nitrogen Tank, controller & regulator (relief valve & gauge sold separately) 55 937-7750 $730.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418

Shpng Price
Pressure Gauge Assemblies
Gauge 0 to 15 psig, 1/4" male & female QC 2 936-1000-1015 $109.00
Gauge 0 to 200 psig, 1/4" male QC 2 936-1000-1200 $109.00
Protective Sleeve - for Cherne Plugs

936-0000-
For Plug sizes 12" - 24" , 1/4” thickness 13 $476.00
300988
936-0000-
300998
936-0000-
301408
936-0000-
For Plug sizes 24" - 42, 1/4” thickness 44 $981.00
301018
936-0000-
301028
936-0000-
301059
936-0000-
301038

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418

Shpng Price
Pull Cages
Pull Cage with hoops, 2" npt 3 936-7520 $103.00
Pull Cage with hoops, 3" npt 5 936-7530 $126.00
Relief Valve Assemblies

936-1000-
Valve, Pressure Relief, 0 to 25 psig, 1/4" male QC 2 $79.00
200025
936-1000-
Valve, Pressure Relief, 0 to 100 psig, 1/4" male QC 2 $79.00
200100
Rotating Elbows (Flange adaptors available)
Rotating Elbow, 3/4 " fnpt x 1.250" OD plated steel 1 936-8007-1 $623.00
Rotating Elbow, 1 1/4" fnpt x 1.875" OD plated steel 5 936-8012-1 $743.00
Rotating Elbow, 2" fnpt x 2.875" OD plated steel 10 936-8020-1 $1050.00
Rotating Elbow, 3" mnpt x 2.5" fnpt x 3.875" OD plated steel 16 936-8030-1 $1219.00
Rupture Discs
Plug Number
130-230-25, 130-230-4, 130-242-4, 130-260-4M 1 924-1302-3060 $180.00
130-248-4, 130-260-4F 1 924-1302-4860 $180.00
130-296-4, 130-272-4 1 924-1302-7296 $180.00
130-030-MS, 130-042-MS, 130-048-MS, 130-060-MS, 130-060-MSM 1 924-1300-3060 $180.00
130-072-MS, 130-096-MS 1 924-1300-7296 $180.00
130-430-F, 130-422-F, 130-448-F, 130-460-F, 130-460-FM 1 924-1304-3060 $180.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Push & Pull, Spigot & Bell End, Pipe Sizes: 6" to 60", 140-0 Series
Helps keep your pipes clean

The non-pressure Pipe Protector Plug, made with a Natural rubber gasket, is a patented polyethylene plug used to keep all types of pipe clean. If
you need to keep your pipe free of water, sand, mud, animals, or just about anything else, this is the answer. It saves time and money and fits pipe
from 6" to 60". Custom sizes are available upon request!
Item Number
Ductile Iron & C-900
Shpg Please include the class of pipe Vylon (Viton) & Pro 21 Unit
Pipe Size for spigot end of DI/C-900
Wt Price
in mm lbs Spigot End Bell End Spigot End Bell End Each
6 152 3 140-006-1S 140-006-1B $51
8 203 3 140-008-1S 140-008-1B $63
10 254 4 140-010-1S 140-010-1B $111
12 305 4 140-012-1S 140-012-1B $144
14 356 4 140-014-1S 140-014-1B $150
16 406 7 140-016-1S 140-016-1B $162
18 457 7 140-018-1S 140-018-1B $186
20 508 7 140-020-1S 140-020-1B $213
21 533 8 140-021-9B $222
24 610 9 140-024-1S 140-024-1B 140-024-9S 140-024-9B $240
27 686 13 140-027-9S 140-027-9B $297
30 762 18 140-030-1S 140-030-1B 140-030-9S 140-030-9B $354
33 838 20 140-033-9S 140-033-9B $375
36 914 25 140-036-1S 140-036-1B 140-036-9S 140-036-9B $390
42 1067 32 140-042-1S 140-042-1B 140-042-9S 140-042-9B $510
48 1219 39 140-048-1S 140-048-1B 140-048-9S 140-048-9B $615
54 1372 57 140-054-1S 140-054-1B 140-054-9S 140-054-9B $1,023
60 1524 65 140-060-1S 140-060-1B 140-060-9S 140-060-9B $1,146
Pipe Item Number

Size Shpg Polyethylene Concrete SDR 35 Unit
Wt Spigot Bell Spigot Bell Spigot Bell Price
in mm
lbs End End End End End End Each
6 152 3 140-006-2S 140-006-2B 140-006-3S 140-006-3B 140-006-4S 140-006-4B $45
8 203 3 140-008-2S 140-008-2B 140-008-3S 140-008-3B 140-008-4S 140-008-4B $54
10 254 4 140-010-2S 140-010-2B 140-010-3S 140-010-3B 140-010-4S 140-010-4B $105
12 305 4 140-012-2S 140-012-2B 140-012-3S 140-012-3B 140-012-4S 140-012-4B $120
15 381 6 140-015-2S 140-015-2B 140-015-3S 140-015-3B 140-015-4S 140-015-4B $138
18 457 7 140-018-2S 140-018-2B 140-018-3S 140-018-3B 140-018-4S 140-018-4B $150
21 533 8 140-021-4B $180
24 610 9 140-024-2S 140-024-2B 140-024-3S 140-024-3B 140-024-4S 140-024-4B $186
27 686 13 140-027-3S 140-027-3B 140-027-4S 140-027-4B $285
30 762 18 140-030-2S 140-030-2B 140-030-3S 140-030-3B 140-030-4S 140-030-4B $336
36 914 25 140-036-2S 140-036-2B 140-036-3S 140-036-3B $348
42 1067 32 140-042-2S 140-042-2B 140-042-3S 140-042-3B $468
48 1219 39 140-048-2S 140-048-2B 140-048-3S 140-048-3B $570
54 1372 57 140-054-2S 140-054-2B 140-054-3S 140-054-3B $981
60 1524 65 140-060-2S 140-060-2B 140-060-3S 140-060-3B $1086
Continued next page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Push & Pull, Spigot & Bell End, Pipe Sizes: 6" to 60", 140-0 Series (Continued)
Helps keep your pipes clean
Item Number
Pipe SDR 21 (cl 200) & 26 (cl
SDR 26 Ultra Rib Steel Gas
Size 160)
Shg Unit
Wt Spigot Bell Spigot Bell Spigot Bell Spigot Bell Price
in mm lbs End End End End End End End End Each
6 152 3 140-006-5S 140-006-5B 140-006-6S 140-006-6B 140-006-8S 140-006-8B $45
8 203 3 140-008-5S 140-008-5B 140-008-6S 140-008-6B 140-008-7S 140-008-7B 140-008-8S 140-008-8B $54
10 254 4 140-010-5S 140-010-5B 140-010-6S 140-010-6B 140-010-7S 140-010-7B $105
12 305 4 140-012-5S 140-012-5B 140-012-6S 140-012-6B 140-012-7S 140-012-7B 140-012-8S 140-012-8B $138
15 381 6 140-015-5S 140-015-5B 140-015-7S 140-015-7B 140-015-8S 140-015-8B $150
18 457 7 140-018-5S 140-018-5B 140-018-7S 140-018-7B 140-018-8S 140-018-8B $177
21 533 8 140-021-5B 140-021-7B $210
24 610 9 140-024-5S 140-024-5B 140-024-7S 140-024-7B 140-024-8S 140-024-8B $228
27 686 13 140-027-7S 140-027-7B $297
30 762 18 140-030-7S 140-030-7B 140-030-8S 140-030-8B $354
36 914 25 140-036-8S 140-036-8B $348

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Test Caps, Pipe Sizes: 1.5" to 6", 142-9 Series
Test caps for different applications
Slip On Style Test Cap Knock Out Style Test Cap

● Made of Polyethylene ● Made of ABS
● Ideal for protecting open pipe ● Deep design provides stronger, leak-free connections
● Slips over DWV pipe or inside the fitting ● For use with Schedule 40 ABS and PVC DWV pipe
● Does not require solvent cement
● Schedule 40 ABS and PVC DWV pipe Hose Clamp Style Test Cap
● ● Made of flexible PVC
End Cap Style Test Cap ● Stainless steel hose clamp - will not rust
● Made of ABS ● For use on plastic, steel, copper, and cast iron pipe
● Deep design provides extra sealing strength
● For use on DWV water or air tests on Schedule 40 ABS and PVC
DWV pipe
Nominal Unit Qty Case Item Unit

Maximum Back Pressure
Size per Case Shpg Wt lbs Number Price Case
Slip On Style Test Cap

1.5" 4.3 psi 10 ft. 50 3 142-91015 $23.40
2" 4.3 psi 10 ft. 25 2 142-9102 $14.47
3" 4.3 psi 10 ft. 10 2 142-9103 $11.54
4" 4.3 psi 10 ft. 10 2 142-9104 $12.79
End Cap Style Test Cap
1.5" 17 psi 40 ft. 100 3 142-92015 $42.30
1.5" - 2" 17 psi 40 ft. 50 3 142-9202M $30.10
2" 17 psi 40 ft. 100 4 142-9202 $43.90
3" 17 psi 40 ft. 50 3 142-9203 $27.30
3" - 4" 17 psi 40 ft. 25 2 142-9204M $21.70
4" 17 psi 40 ft. 20 2 142-9204 $12.04
Knock Out Style Test Cap

1.5" 13 psi 30 ft. 100 2 142-93015 $20.10
2" 13 psi 30 ft. 100 4 142-9302 $24.50
3" 13 psi 30 ft. 50 4 142-9303 $19.00
4" 13 psi 30 ft. 25 3 142-9304 $12.27
Hose Clamp Style Test Cap
1.5" 13 psi 30 ft. 10 2 142-94015 $33.10
2" 13 psi 30 ft. 10 3 142-9402 $34.20
3" 13 psi 30 ft. 10 4 142-9403 $43.10
4" 13 psi 30 ft. 10 7 142-9404 $50.80
5" 13 psi 30 ft. 5 8 142-9405 $79.00
6" 13 psi 30 ft. 5 6 142-9406 $55.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Hand Tightening Nylon Test & Cleanout, Pipe Sizes: 1 1/2" to 4", 143-0 Series
Economical plugs for many applications

Mechanical Test Plug For Air Tests
● Employs a hollow, bored bolt stem, and threaded brass air filler valve.
● A bored bolt stem and integral brass air valve make the pneumatic test plug an easy alternative to standard water head pressure tests.
● Simply insert, tighten, and inflate. The non-slip shoulder prevents the gasket from spinning.
Pipe Diameter Relative Blowout Ratings* Shpg Unit

Maximum Minimum 72oF 15oF 0oF Wt Item Price
in mm in mm psig psig psig lbs Number Each
1.820 46 1.550 39 65 55 42 1 143-001-P $20.95
2.100 53 1.865 47 65 25 10 1 143-002-P $21.30
3.135 79 2.860 72 45 11 7 1 143-003-P $23.15
4.150 105 3.875 98 42 10 8 1 143-004-P $24.85
Mechanical Test Plug For Head Tests

● Designed with only four corrosion proof components:
● Polypro wingnut
● Nylon top plate
● Soft PVC gasket
● Nylon base/stem for simplicity and strength
● Back to front wedge design prevents blowouts at high and low temperatures.
● Provides a leak-free seal at seven times the psi of other mechanical test plugs.
● "Non-slip shoulder for fast, easy installations."
Pipe Diameter Relative Blowout Ratings* Shpg Unit

Maximum Minimum 72oF 15oF 0oF Wt Item Price
in mm in mm psig psig psig lbs Number Each
1.820 46 1.550 39 65 55 42 1 143-001 $4.75
2.100 53 1.865 47 65 25 10 1 143-002 $4.75
3.135 79 2.860 72 45 11 7 1 143-003 $7.10
4.150 105 3.875 98 42 10 8 1 143-004 $8.80
Mechanical Test Plug For Cleanouts

● Soft PVC gasket creates an air-tight seal first behind the threads then forms into them.
● Ideal for use on damaged cleanout openings or on damaged or deteriorated threads.
● "Seals 1-1/2" - 4" female cleanout threads."
Pipe Diameter Shpg Unit

Maximum Minimum Wt Item Price
in mm in mm lbs Number Each
1.830 46 1.615 41 1 143-001-C $6.20
4.260 108 3.875 98 1 143-003-C $9.05
4.315 109 4.050 102 1 143-004-C $11.50

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Hand Tightening Nylon Test, Pipe Sizes: 3 3/4" to 19", 142-0 Series
Extremely versatile and cost effective expansion plugs for many applications
Hand Tightening Nylon Body Test Plugs

● By-pass is a standard feature on 10", 12", 15", and 18" diameter
● By-pass available on special order for smaller size plugs
● Low cost
● Light weight 15" and 18" plug - Stainless steel
thumb screws and brass inserts
● Reusable
● Can be buried indefinitely
● Easily installed, no tools required
● No metal parts up to 12" sizes
● Polyisoprene rubber construction seals
Plugs under 15" - Rugged

nylon and Polyisoprene
rubber construction.
Plug openings in sewer access Low pressure test plug Seal both ends of PVC pipe
Plain end pipe Bell & spigot pipe Seal drains in flood-prone basements
Pipe Diameter Outer

Plate Maximum* Shpg Unit
Maximum Minimum Dia. Head Pressure Wt Item Price
in mm in mm in mm psig bar lbs Number Each
4.60 117 3.75 95 4.5 114 5 0.3 1 142-004 $12.80
5.80 147 5.10 130 5.8 147 5 0.3 2 142-005 $14.40
6.80 173 5.80 165 6.5 165 5 0.3 3 142-006 $16.00
8.60 218 7.90 201 8.5 215 5 0.3 3 142-008 $38.50
10.75 273 9.50 241 10.5 266 5 0.3 4 142-010 $121.00
12.50 318 11.50 292 12.5 317 5 0.3 5 142-012 $143.00
14.30 363 14.00 356 15.25 388 5 0.3 6 142-015 $330.00
17.50 444 17.25 438 18.5 469 5 0.3 8 142-018 $480.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Hand Tightening Low Pressure Aluminum Body
By-Pass, Pipe Sizes: 1 1/2" to 36", 141-0 Series
For very low pressure test or temporary closure

● Durable cast aluminum body, plated steel wing nut and by-pass, heavy
duty, non-corrosive and maintenance-free; with SBR/Natural rubber seals.
● Lightweight, easy to handle - up to 70% lighter than similar steel plugs.
● Fill or Vent - threaded pipe stem has removable cap.
● Simple to install and work with - wing nut easily expands rubber seal.
● These plugs have a SBR/Natural rubber seal.
● These plugs are non pressure rated
Shpg Unit
Nominal Size Expanded Diameter Relaxed Diameter By-Pass Size
Wt Item Price
in mm in mm in mm bspm/npt in mm lbs Number Each
1.5 38 1.889 48 1.456 37 0.5 13 1 141-0015 $29
2 51 2.44 62 1.889 48 0.5 13 1 141-0020 $30
2.5 64 2.775 70 2.44 62 0.5 13 1 141-0025 $31
3 76 3.425 87 2.795 71 0.5 13 1 141-0030 $37
3.5 89 3.7 94 3.503 89 0.5 13 1 141-0035 $41
4 102 4.133 105 3.779 96 0.5 13 1 141-0040 $58
4.5 114 4.724 120 4.4 112 0.5 13 1 141-0045 $60
5 127 5.393 137 4.842 123 0.5 13 2 141-0050 $66
6 152 6.55 166 5.9 150 0.5 13 2 141-0060 $74
7 178 7.3 185 6.55 166 1 25 3.5 141-0070 $107
8 203 8.55 217 7.7 196 1 25 3.5 141-0080 $109
9 229 9.1 231 8.2 208 1 25 4.5 141-0090 $134
10 254 10.25 260 9.2 234 1 25 5 141-0100 $140
11 279 11.2 284 10.3 262 1 25 8 141-0110 $218
12 305 12.45 316 11.35 288 1 25 8 141-0120 $207
14 356 15.1 384 13.8 351 1 25 11.5 141-0140 $347
15 381 15.8 401 14.35 364 1 25 14 141-0150 $377
16 406 17 432 15.6 396 1 25 14 141-0160 $419
18 457 19.25 489 17.45 443 1 25 18 141-0180 $577
20 508 20.65 525 19.15 486 2 51 30 141-0200 $748
21 533 22.1 561 20.65 525 2 51 32 141-0210 $772
24 610 25.5 648 23.55 598 2 51 38 141-0240 $1019
27 686 27.7 704 26.25 667 2 51 44 141-0270 $1391
30 762 31 787 29.25 743 2 51 60 141-0300 $1638
32 812 32 812 31.125 794 2 51 61 141-0320 $1847
36 914 36.8 935 34.5 876 2 51 96 141-0360 $2,323
Note: Expansion plugs are less effective at higher limits of expansion than in the mid range. Let us help you by supplying the proper sizes for your
requirements.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Hand Tightening Low Pressure Nylon, Pipe Sizes: 1/2" to 6", 144-0 Series
Used for a wide variety of industrial applications
● These superior, versatile, expandable pipe plugs are used to accommodate a wide
variety of industrial applications where an airtight seal is required.
● Quality, Lightweight, Durable Nylon 20% lighter than metal.
● Tough/shatter-proof and easily cleaned and maintained, corrosion resistant.
● Plaster or cement do not adhere to the plug.
● Friction-reducing acetyl copolymer thrust washer inserted between plate and wing
nut provides for easy expansion.
● SBR/Natural Rubber provides "superior" seal.
● Larger sizes incorporate strengthening ribs to provide rigidity in use.
● Silicon, nitrile, and viton seals available.
By-Pass
Nominal Size Expanded Diameter Relaxed Diameter Size Shpg Wt Item Unit Price
in mm in mm in mm bspm/npt in mm lbs Number Each
Mechanical Plugs Without By-Pass
0.5 13 0.6 15 0.49 12 1 144-0005 $7.95
0.75 19 0.9 23 0.74 19 1 144-0007 $8.15
1 25 1.2 30 0.975 25 1 144-0010 $8.70
1.25 32 1.45 37 1.225 31 1 144-0012 $11.85
1.5 38 1.75 44 1.48 38 1 144-0015 $12.70
Mechanical Plugs With By-Pass
0.5 13 0.6 15 0.49 12 1/8" 3 1 144-0005-8 $21.10
0.75 19 0.9 23 0.74 19 1/8" 3 1 144-0007-8 $22.00
1 25 1.2 30 0.975 25 1/8" 3 1 144-0010-8 $22.65
1.25 32 1.45 37 1.225 31 1/8" 3 1 144-0012-8 $25.10
1.5 38 1.93 49 1.42 36 1/2" 13 1 144-0015-8 $23.20
2 51 2.36 60 1.93 49 1/2" 13 1 144-0020-8 $25.15
2.5 64 2.76 70 2.4 61 1/2" 13 1 144-0025-8 $26.55
3 76 3.31 84 2.87 73 1/2" 13 1 144-0030-8 $27.20
4 102 4.25 108 3.54 90 1/2" 13 1 144-0040-8 $29.80
5 127 5.37 136 4.72 120 1/2" 13 1 144-0050-8 $45.40
6 152 6.29 160 5.5 140 1/2" 13 1 144-0060-8 $46.90
Accessories for Mechanical Plugs With By-Pass
18" Hose Rubber 1/2" npt fittings 1 930-35180 $28.80
48" Hose Rubber 1/2" npt fittings 1 930-35480 $44.00
Note: Expansion plugs are less effective at higher limits of expansion than in the mid range. Let us help you by supplying the proper sizes for your
requirements.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Flush Mounted and Beveled Finishing Plate,
Pipe Sizes: 1.5" to 4", 140-4 & 140-5 Series
Helps keep your drains clean in heavy traffic areas

These non-pressure plugs come in two styles, the Counter Sunk and the Finishing Plate style. These plugs have a stainless steel hex expansion
screw, a neoprene gasket, and ABS construction for use in commercial applications. Commonly used where carpeting will be laid over a clean out
as in an office or finished basement. Either may be used for wall applications, though use of the Finishing Plate style is more common. Plugs
have a neoprene gasket.
These plugs use a 5/32" Allen wrench for installation and removal and are considered a tamper proof expansion plug. To install plug simply hand
tighten the screw to the right until snug. Do not over tighten. To remove plug turn screw to the left, lightly tap the screw then remove the plug.
The 140-4 Counter Sunk style has a heavy duty 12 gauge stainless steel top plate for use in areas of heavy traffic areas such as driveways,
doorways, sidewalks, or warehouse floor drains where heavy machinery can be driven over it. It will sit flush to the floor. Gasket to the top of the
stainless steel plate is 1/4".
The 140-5 Finishing Plate Style is for lighter duty walking traffic Beveled plate will sit atop the floor surface.
Stainless Steel (12 gauge) Topped Counter-Sunk Plugs

Nominal Range of Use
Sch 10 SS Shpg Unit
Size Expanded Diameter Relaxed Diameter Cover Size Wt Item Price
in mm in mm in mm in lbs Number Each
1.5 38.1 1.89 48 1.64 42 2-5/8 1 140-4015 $25.10
2.0 50.8 2.18 55 2.04 52 2-5/8 1 140-4020 $26.50
2.5 63.5 2.95 75 2.66 68 3-3/4 1 140-4025 $30.00
3.0 76.2 3.50 88 3.30 84 4 1 140-4030 $34.60
3.5 88.9 4.00 101 3.72 95 4-7/8 1 140-4035 $38.30
140-4 Series Stainless Steel
4.0 101.6 4.45 112 4.20 107 5-1/2 1 140-4040 $39.50
Topped Counter Sunk Plugs
Bright Stainless Steel (22 gauge) Finishing Plate Plugs - Flush

Nominal Range of Use
Sch 10 SS Shpg Unit
Size Expanded Diameter Relaxed Diameter Cover Size Wt Item Price
in mm in mm in mm in lbs Number Each
1.5 38.1 1.89 48 1.64 42 3 1 140-5015 $25.50
2.0 50.8 2.18 55 22.20 52 3 1 140-5020 $26.00
2.5 63.5 2.95 75 2.66 68 4 1 140-5025 $40.00
3.0 76.2 3.50 88 3.30 84 6 1 140-5030 $43.80 140-5 Series bright Stainless Steel
3.5 88.9 4.00 101 3.72 95 6 1 140-5035 $45.10 Finishing Plate Plugs
4.0 101.6 4.45 112 4.20 107 8 1 140-5040 $47.90

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Monitor Well, Pipe Sizes: 1" to 8", 142-8 Series
Designed to seal monitor wells

Monitor-Well Locking Plug Features:
● Designed to seal monitor wells
● Meets all EPA requirements for locking plugs
● Sized to seal Schedule 40 piping
● 2" and 4" sizes can also seal Schedule 5 pipe
● Works with solid brass padlock (sold separately)
Equipped with:
● Chemical and petroleum-resistant Estaloc™ plastic top and bottom plates
● Petroleum resistant nitrile o-ring
● Stainless steel carriage bolt
● Yellow chromate-coated locking latch
Shpg Unit
Nominal Size Range of Use Maximum Back Pressure Length Wt lbs Item Number Price Each
1" - 1.25" 1"-1.38" 6.5 psi 15 ft. 2.5"
1 142-8012 $23.00
(25-30 mm) (23-35 mm) (0.,45 bar) (4.5 M) (64 mm)
2" 1.9"-2.31" 6.5 psi 15 ft. 2.5"
1 142-802 $25.90
(50 mm) (49-59 mm) (0.,45 bar) (4.5 M) (64 mm)
3" 2.8"-3.1" 6.5 psi 15 ft. 2.6"
1 142-803 $28.30
(75 mm) (71-79 mm) (0.,45 bar) (4.5 M) (66 mm)
4" 3.8"-4.38" 6.5 psi 15 ft. 3.0"
1 142-804 $30.10
(100 mm) (97-111 mm) (0.,45 bar) (4.5 M) (76 mm)
6" 5.77"-6.08" 6.5 psi 15 ft. 3.98"
2 142-806 $77.20
(150 mm) (147-155 mm) (0.,45 bar) (4.5 M) (101 mm)
8" 7.76"-8.03" 6.5 psi 15 ft. 3.98"
3 142-808 $132.10
(200 mm) (197-204 mm) (0.,45 bar) (4.5 M) (101 mm)
Pad Lock, Size #2 1 142-800 $6.95
Shackle Dims: 0.215" diameter, 0.73" horizontal clearance, 0.67" vertical clearance
Body Dims: 1.073" height, 1.39" width, 0.419" thickness

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Lever Type Expandable Rubber, Pipe Sizes: 3/8" to 4", 143-1 Series
Extremely versatile and cost effective expansion plugs

● Brass lever type handle provides an excellent
grip to fasten the plug into a hole
● Plugs have a brass handle and zinc-plated steel hardware.
● Can be used to hang products or seal holes
● Low cost
● Light weight
● Reusable
● These plugs come standard with Neoprene rubber,
a brass handle, and zinc-plated steel hardware
Relaxed Body Flange Top Plate Installed Shpg Unit

Nominal SIze Expanded Diameter Diameter Length Diameter Diameter Height Wt Item Price
in mm in mm in mm in mm in mm in mm in mm lbs Number Each
3/8 9.65 0.417 10.592 0.375 9.53 0.69 17.53 1.12 28.45 1.05 26.67 0.65 16.51 1 143-1038 $6.85
7/16 11.18 0.451 11.455 0.406 10.31 0.69 17.53 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1044 $6.85
1/2 12.7 0.52 13.208 0.468 11.89 0.66 16.76 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1050 $6.85
9/16 14.22 0.611 15.519 0.55 13.97 0.66 16.76 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1056 $6.85
5/8 16 0.68 17.272 0.612 15.54 0.65 16.51 0.97 24.64 1.05 26.67 0.66 16.76 1 143-1063 $6.85
11/16 17.53 0.729 18.517 0.656 16.66 0.69 17.53 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1069 $6.85
3/4 19.05 0.799 20.295 0.719 18.26 0.69 17.53 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1075 $6.85
13/16 20.57 0.868 22.047 0.781 19.84 0.69 17.53 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1081 $6.85
7/8 22.35 0.944 23.989 0.85 21.59 0.69 17.53 1.12 28.45 1.05 26.67 0.69 17.53 1 143-1088 $6.85
15/16 23.88 1.007 25.578 0.906 23.01 0.69 17.53 1.22 30.99 1.26 32 0.69 17.53 1 143-1094 $6.85
31/32 24.64 1.041 26.441 0.937 23.8 0.69 17.53 1.22 30.99 1.26 32 0.72 18.29 1 143-1097 $6.85
1 25.4 1.077 27.356 0.969 24.61 1.12 28.45 1.5 38.1 1.63 41.4 1.26 32 1 143-1100 $22.95
1 1/8 28.7 1.167 29.642 1.05 26.67 1.18 29.97 1.62 41.15 1.63 41.4 1.19 30.23 1 143-1113 $23.20
1 1/4 31.75 1.322 33.579 1.19 30.23 1.18 29.97 1.69 42.93 1.88 47.75 1.2 30.48 1 143-1125 $23.40
1 3/8 35.05 1.444 36.678 1.3 33.02 1.16 29.46 1.75 44.45 1.88 47.75 1.15 29.21 1 143-1138 $23.80
1 1/2 31.8 1.533 38.938 1.38 35.05 1.19 30.23 2 50.8 2.13 54.1 1.19 30.23 1 143-1150 $24.00
1 5/8 41.4 1.7 43.18 1.53 38.86 1.19 30.23 2 50.8 2.19 55.63 1.43 36.32 1 143-1163 $24.25
1 3/4 44.45 1.811 45.999 1.63 41.4 1.19 30.23 2.22 56.39 2.31 58.67 1.09 27.69 1 143-1175 $24.30
1 7/8 47.75 1.944 49.378 1.75 44.45 1.12 28.45 2.31 58.67 2.31 58.67 1.15 29.21 1 143-1188 $24.55
2 50.8 2.167 55.042 1.95 49.53 1.07 27.18 2.43 61.72 2.56 65.02 1.09 27.69 1 143-1200 $24.60
2 1/8 54.1 2.289 58.141 2.06 52.32 1.25 31.75 2.69 68.33 2.65 67.31 1.03 26.16 1 143-1213 $29.35
2 1/4 57.15 2.5 63.5 2.25 57.15 1.25 31.75 2.63 66.8 2.81 71.37 1.03 26.16 1 143-1225 $30.15
2 3/8 60.45 2.567 65.202 2.31 58.67 1.19 30.23 2.78 70.61 2.91 73.91 1.09 27.69 1 143-1238 $30.50
2 1/2 63.5 2.744 69.698 2.47 62.74 1.18 29.97 2.97 75.44 3.19 81.03 1.09 27.69 1 143-1250 $30.65
2 5/8 66.8 2.811 71.399 2.53 64.26 1.25 31.75 3 76.2 3.19 81.03 1.09 27.69 1 143-1263 $31.35
2 3/4 69.85 2.989 75.921 2.69 68.33 1.19 30.23 3.19 81.03 3.3 83.82 1.09 27.69 1 143-1275 $31.65
2 7/8 73.15 3.178 80.721 2.86 72.64 1.15 29.21 3.25 82.55 3.5 88.9 1.07 27.18 1 143-1288 $31.75
3 76.2 3.267 82.982 2.94 74.68 1.15 29.21 3.45 87.63 3.5 88.9 1.06 26.92 1 143-1300 $33.75
3 1/4 82.55 3.533 89.738 3.18 80.77 1.19 30.23 3.53 89.66 3.87 98.3 1.06 26.92 1 143-1325 $196.00
3 1/2 88.9 3.756 95.402 3.38 85.85 1.25 31.75 3.75 95.25 4.16 105.66 1.04 26.42 1 143-1350 $74.70
4 101.6 4.378 111.201 3.94 100.08 1.19 30.23 4.44 112.78 4.75 120.65 1.11 28.19 1 143-1400 $43.25

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, T-Handle Expandable Rubber Plugs, Pipe Sizes: 1/2" to 5", 143-2 Series
Extremely versatile and cost effective expansion plugs

● These plugs come standard with Neoprene rubber.
● T-handle provides an excellent grip to fasten the plug into a hole
● Plugs have a brass handle and zinc-plated steel hardware.
● Can be used to hang products or seal holes
● Low cost
● Light weight
● Reusable
Relaxed Body Flange Top Plate Installed Shpg Unit

Nominal Size Expanded Diameter Diameter Length Diameter Diameter Height Wt Item Price
in mm in mm in mm in mm in mm in mm in mm lbs Number Each
1/2 12.7 0.53 13.41 0.48 12.19 0.66 16.76 0.75 19.05 0.81 20.57 1.02 25.91 1 143-2050 $17.50
5/8 16 0.62 15.7 0.562 14.27 0.66 16.76 0.562 14.27 1 25.4 1.21 30.73 1 143-2063 $17.50
3/4 19.05 0.79 20.09 0.719 18.26 0.69 17.53 1 25.4 1 25.4 1.24 31.5 1 143-2075 $17.80
7/8 22.35 0.89 22.68 0.812 20.62 0.66 16.76 1.09 27.69 1.25 31.75 1.25 31.75 1 143-2088 $18.15
1 25.4 1.03 26.18 0.937 23.8 1.31 33.27 1.25 31.75 1.38 35.05 1.28 32.51 1 143-2100 $18.40
1 1/8 28.7 1.17 29.61 1.06 26.92 1.25 31.75 1.56 39.62 1.63 41.4 1.28 32.51 1 143-2113 $18.55
1 1/4 31.75 1.33 33.8 1.21 30.73 1.32 33.53 1.75 44.45 1.88 47.75 1.33 33.78 1 143-2125 $18.70
1 3/8 35.05 1.45 36.88 1.32 33.53 1.31 33.27 1.75 44.45 1.88 47.75 1.31 33.27 1 143-2138 $18.90
1 1/2 38.1 1.58 40.24 1.44 36.58 1.32 33.53 1.93 49.02 2.19 55.63 1.37 34.8 1 143-2150 $19.05
1 5/8 41.4 1.71 43.31 1.55 39.37 1.32 33.53 1.94 49.28 2.19 55.63 1.28 32.51 1 143-2163 $19.25
1 3/4 44.45 1.87 47.5 1.7 43.18 1.3 33.02 2.2 55.88 2.41 61.21 1.36 34.54 1 143-2175 $19.30
1 7/8 47.75 1.99 50.57 1.81 45.97 1.25 31.75 2.25 57.15 2.41 61.21 1.31 33.27 1 143-2188 $19.40
2 50.8 2.12 53.92 1.93 49.02 1.13 28.7 2.44 61.98 2.56 65.02 1.47 37.34 1 143-2200 $19.50
2 1/8 54.1 2.27 57.55 2.06 52.32 2 50.8 3 76.2 3.19 81.03 1.71 43.43 1 143-2213 $34.10
2 1/4 57.15 2.44 62.03 2.22 56.39 2 50.8 3.12 79.25 3.19 81.03 1.71 43.43 1 143-2225 $34.10
2 3/8 60.45 2.53 64.26 2.3 58.42 2 50.8 3 76.2 3.19 81.03 1.71 43.43 1 143-2238 $40.30
2 1/2 63.5 2.68 68.18 2.44 61.98 2 50.8 3.37 85.6 3.44 87.38 1.66 42.16 1 143-2250 $34.40
2 5/8 66.8 2.82 71.52 2.56 65.02 1.97 50.04 3.25 82.55 3.44 87.38 1.74 44.2 1 143-2263 $41.70
2 3/4 69.85 2.89 73.48 2.63 66.8 2 50.8 3.63 92.2 4.15 105.41 1.71 43.43 1 143-2275 $34.70
2 7/8 73.15 3.09 78.51 2.81 71.37 2 50.8 3.68 93.47 4.15 105.41 1.71 43.43 1 143-2288 $41.90
3 76.2 3.21 81.59 2.92 74.17 1.94 49.28 3.88 98.55 4.15 105.41 1.64 41.66 1 143-2300 $36.40
3 1/8 79.5 3.37 85.49 3.06 77.72 2 50.8 3.87 98.3 4.15 105.41 1.71 43.43 1 143-2313 $36.70
3 1/4 82.55 3.44 87.45 3.13 79.5 1.97 50.04 3.94 100.08 4.15 105.41 1.67 42.42 1 143-2325 $36.70
3 3/8 85.85 3.64 92.48 3.31 84.07 2 50.8 3.87 98.3 4.63 117.6 1.71 43.43 1 143-2338 $40.00
3 1/2 88.9 3.78 96.12 3.44 87.38 2 50.8 4.25 107.95 4.63 117.6 1.71 43.43 1 143-2350 $40.00
3 5/8 92.2 3.89 98.91 3.54 89.92 2 50.8 4.24 107.7 4.63 117.6 1.64 41.66 1 143-2363 $40.35
3 3/4 95.25 4.06 103.1 3.69 93.73 2 50.8 4.5 114.3 4.63 117.6 1.71 43.43 1 143-2375 $40.35
3 7/8 98.55 4.19 106.45 3.81 96.77 2 50.8 4.5 114.3 4.63 117.6 1.71 43.43 1 143-2388 $40.70
4 101.6 4.37 110.92 3.97 100.84 2 50.8 4.6 116.84 4.63 117.6 1.66 42.16 1 143-2400 $40.70
4 1/2 114.3 4.88 124.06 4.44 112.78 2 50.8 5.25 133.35 5.25 133.35 2.12 53.85 1 143-2450 $176.00
5 127 5.36 136.07 4.87 123.7 2.56 65.02 5.75 146.05 5.88 149.35 2.19 55.63 1 143-2500 $190.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Wing Nut, End of Pipe & Water Line Stub,
Pipe Sizes: .39" to 6", 143-3, 143-4, 143-5 Series
Cost effective plugs
143-3 Series Steel Wing Nut Plugs Sizes: 1.5" to 6" 143-3XXX-C Series Steel Wing Nut Plugs Sizes: 1.5" to 6"
● These plugs have a SBR/Natural rubber o-ring. ● These plugs feature stainless steel bolt and plate with a chemical resistant
● These plugs feature galvanized metal plates and bolts with a nitrile rubber.
SBR/Natural rubber o-ring. ● Cost effective chemical resistant plug. Can be used as pipe dust cover.
● Cost effective way for plugging open ended pipes. Pipe Diameter Shpg Unit
Nominal Maximum Minimum Product Length Wt Item Price
● Can be used as pipe dust cover.
in mm in mm in mm in mm lbs Number Each
● These plugs are not pressure rated 143-3 Galvanized Steel Wing Nut Plugs
1.5 40 1.65 42 1.44 37 2.56 65 1 143-3015 $2.60
2 50 2.25 57 1.96 50 2.62 67 1 143-3020 $2.82
3 75 3.25 82 2.86 73 2.64 67 1 143-3030 $4.41
4 100 4.5 114 3.78 96 3.25 82 1 143-3040 $5.52
5 125 5.3 135 4.62 117 3.55 90 2 143-3050 $10.30
6 150 6.4 162 5.62 143 3.19 81 2 143-3060 $11.80
143-3xxx-C Stainless Steel Wing Nut Plugs
1.5 40 1.75 44 1.44 37 2.56 65 1 143-3015-C $12.80
2 50 2.25 57 1.96 50 2.62 67 1 143-3020-C $14.00
3 75 3.25 82 2.86 73 2.64 67 1 143-3030-C $22.50
4 100 4.5 114 3.78 96 3.25 82 1 143-3040-C $28.00
5 125 5.3 135 4.62 117 3.55 90 2 143-3050-C $44.40
6 150 6.3 160 5.62 143 3.19 81 2 143-3060-C $49.20
143-4 Series Polypropylene End of Pipe Plugs Sizes: 1.5" to 4"

● These plugs feature a Polypropylene construction with a Natural rubber o-
ring.
● Fits all types of pipe at nominal sizes.
● Can be used as a permanent or temporary plug.
● Can be tapped for use with cleanout cover.
Pipe Diameter Maximum Allowable Back Pressures* Shpg Unit

Nominal Maximum Minimum Air Pressure Head Pressure Product Length Wt Item Price
in mm in mm in mm psi bar ft m in mm lbs Number Each *Mechanical Plug Warning: Maximum head pressures that a pipe plug may hold
back can only be estimated. Pressures are influenced by many factors including
1.5 40 1.63 42 1.48 40 22 1.5 50 15 2.5 64 1 143-4015 $4.40 fluid and debris in the pipeline, type and condition of pipe, tightness of plug seal,
and temperature. Plugs should always be inserted fully into pipeline and should
2 50 2.09 53 1.89 48 22 1.5 50 15 3 75 1 143-4020 $4.80 be mechanically blocked when slippage could cause property damage or injury.
NEVER use a test pressure greater than the capacity of the weakest pipe or
3 75 3.09 79 2.89 73 13 0.9 30 9 3.7 94 1 143-4030 $6.20 component in the system. NEVER use a mechanical plug when its failure could
cause injury.
4 100 4.09 103 3.87 98 13 0.9 30 9 3.5 87 1 143-4040 $9.90
143-5 Series Water Line Stub Plugs Sizes: .39" to 5"
Pipe Diameter Maximum Allowable Back Pressures* Product

Len Shpg Unit
Nominal Maximum Minimum Air Pressure Head Pressure Dia
gth Wt Item Price
in mm in mm in mm psi bar ft m in mm mm lbs Number Each
0.39 10 0.43 11 0.38 10 185 12.8 428 128 0.38 10 48 1 143-5004 $5.23
0.5 13 0.56 14 0.5 13 180 12.4 415 124 0.49 12 48 1 143-5005 $5.23
0.75 20 0.87 22 0.72 18 180 12.4 415 124 0.7 18 52 1 143-5007 $5.23 ● These plugs have a SBR/Natural rubber o-ring.
1 25 1.02 26 0.86 22 40 2.8 92 28 0.84 21 55 1 143-5010 $5.28 ● Works in all types of pipe.
1.25 32 1.43 36 1.24 32 112 7.7 258 77 1.22 31 52 1 143-5012 $6.83
● Ideal for plugging water line stub-outs.
1.5 40 1.53 39 1.43 36 88 6.1 203 62 1.41 36 48 1 143-5015 $8.18
2 50 2.06 52 1.73 44 112 7.7 258 77 1.71 43 67 1 143-5020 $11.90 ● Designed for high pressure applications.
2.5 60 2.78 71 2.3 58 72 4.9 166 51 2.28 58 70 1 143-5025 $16.50 ● Sizes .39" to 1.25" have a wing nut.
3 75 3.2 81 2.73 69 28 1.9 65 19 2.71 69 79 2 143-5030 $19.20
● Sizes 1.5" to 5" have a hex nut.
4 100 4.5 114 3.72 95 24 1.7 55 17 3.7 94 79 3 143-5040 $28.90
5 125 5.19 132 4.8 122 8 0.6 18 6 4.78 121 82 3 143-5050 $41.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, T-Handle Aluminum Test With & Without By-Pass,
Plugs for long-term applications
143-7 Series T-Handle Aluminum Test Plugs With and Without By-Pass Sizes: 6" to 18"
● These plugs have a neoprene seal.
● These plugs are equipped with a heavy-duty
aluminum body and T-handle with a chemical resistant neoprene seal.
● Ideal for long-term applications
● Can be used for sewer air pressure tests.
● Available with or without by-pass.
● Sizes 6" to 12" are sized for concrete, clay, and SDR 26 & 35 pipe.
● Sizes 15" & 18" are sized for concrete and clay pipe sizes only.
Pipe Diameter Maximum Allowable Back Pressures* By-Pass Product

Liquid Shpg Unit
Nominal Maximum Minimum Air Pressure Head Pressure Dia Length Wt Item Price
in mm in mm in mm psi bar ft m in npt in mm lbs Number Each
T-Handle Aluminum Test Plugs Without By-Pass
6 150 6.3 160 5.7 144 5 0.34 40 12 9.7 247 6 143-7060 $159.10
8 200 8.3 211 7.7 196 5 0.34 40 12 9.7 247 9 143-7080 $198.60
10 250 10.3 262 9.8 248 5 0.34 40 12 9.7 247 12 143-7100 $278.70
12 300 12.3 312 11.7 297 5 0.34 40 12 9.7 247 16 143-7120 $311.00
15 380 15.3 388 14.8 377 5 0.34 30 9.1 9.7 247 23 143-7150 $429.50
18 460 18.3 465 17.7 450 5 0.34 20 6.1 9.7 247 30 143-7180 $604.20
T-Handle Aluminum Test Plugs With By-Pass
6 150 6.3 160 5.7 144 5 0.34 40 12 1/4 M 9.7 247 7 143-7060-8 $191.40
8 200 8.3 211 7.7 196 5 0.34 40 12 3/4 M 9.7 247 10 143-7080-8 $239.20
10 250 10.3 262 9.8 248 5 0.34 40 12 3/4 M 9.7 247 13 143-7100-8 $311.00
12 300 12.3 312 11.7 297 5 0.34 40 12 3/4 M 9.7 247 16 143-7120-8 $351.50
15 380 15.3 388 14.8 377 5 0.34 30 9.1 3/4 M 9.7 247 24 143-7150-8 $476.30
18 460 18.3 465 17.7 450 5 0.34 20 6.1 3/4 M 9.7 247 31 143-7180-8 $549.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Clean-Out and Hub-Fit Gripper® Type, Pipe Sizes: 2.2" to 4.8", 143-8 Series
Able to seal damaged threads and used for testing
Reinforced ABS & SS Threaded Plugs Features:

● These plugs have a natural rubber o-ring seal.
● Guaranteed to seal any damaged threads
● Made with glass-reinforced ABS plastic
● Black color blends well with cast-iron pipe
● Stainless steel hardware
● NPT sizes, including hard to find 3½"
● Patented natural rubber threaded o-ring for positive seal
Shpg Unit
Range Wt Item Price
of Use Maximum Back Pressure* Length lbs Number Each
2.17"-2.46"
17 psi 40 ft. 1.9" 1 143-8020 $12.00
55-62 mm)
3.23"-3.5"
17 psi 40 ft. 2.2" 1 143-8030 $12.90
(82-88 mm)
3.78"-4.25"
17 psi 40 ft. 2.2" 1 143-8035 $16.20
(96-107 mm)
4.28"-4.63"
17 psi 40 ft. 2.2" 1 143-8040 $17.70
(108-117 mm)
Reinforced ABS & Steel DWV Hub Test Plugs Features:

● Ideal for use in hub fittings and in bell-end pipe
● Pressure rated for conducting DWV tests
● Yellow color for greater visibility in pipe
● Natural rubber o-ring for positive seal
● Galvanized carriage bolt to prevent corrosion
● Easy-to-install, extra large zinc wing nut - won't rust
Shpg Unit
Range Wt Price
of Use Maximum Back Pressure* Length lbs Item Number Each
2.35"-2.49"
13 psi(0,9 bar) 30 ft.(9 M) 1.9"(48 mm) 1 143-8020-B $8.10
(59-63 mm)
3.55"-3.85"
13 psi(0,9 bar) 30 ft.(9 M) 2.4"(61 mm) 1 143-8030-B $13.70
(90-97 mm)
4.44"-4.83"
13 psi(0,9 bar) 30 ft.(9 M) 2.4"(61mm) 1 143-8040-B $16.20
(112-122 mm)

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Reinforced ABS Wing Nut, Pipe Sizes: 1.5" to 8", 143-9 Series
To be used for DWV Testing and Stack Testing
Petersen's Gripper plugs can be used in a variety of applications including DWV (drain, waste and
vent) testing and stack testing. End-of-Pipe design won't fall in, whereas the Inside-of-Pipe design
allows you to locate the plug inside the pipe as far as you need. Time tested, the Gripper®
remains one of the most popular mechanical plugs on the market.
● End of pipe design won't fall in, whereas the inside of pipe design allows you to locate the
plug inside the pipe as far as you need.
● Time tested, this Plug remains one of the most popular mechanical plugs on the market.
Features:
● Ideal for sewer testing and long-term applications
● End of pipe design seals only at the end of a pipe
● Inside of pipe design seals inside pipe as far as needed
Equipped with:
● Easy to install extra large zinc wing nut - won't rust
● Natural rubber o-ring
Unit
Shpg Wt Price
Nominal Size Range of Use Maximum Back Pressure Length lbs Item Number Each
End of Pipe Plug
1 1/2" 1.48"-1.65" 17 psi 40 ft. 1.75"
1 143-9015-E $4.99
(40 mm) (39-42 mm) (1,2 bar) (12 M) (44.5 mm)
2" 1.9"-2.17" 17 psi 40 ft. 1.87"
1 143-9020-E $5.74
(50 mm) (49-55 mm) (1,2 bar) (12 M) (47.5 mm)
3" 2.8"-3.1" 17 psi 40 ft. 2.5"
1 143-9030-E $7.75
(75 mm) (71-79 mm) (1,2 bar) (12 M) (63.5 mm)
4" 3.8"-4.06" 17 psi 40 ft. 2.5"
1 143-9040-E $9.47
(100 mm) (96-103 mm) (1,2 bar) (12 M) (63.5 mm)
6" 5.77"-6.08" 17 psi 40 ft. 3.75"
2 143-9060-E $25.70
(150 mm) (147-154 mm) (1,2 bar) (12 M) (95.3 mm)
8" 7.7"-8.03" 17 psi 40 ft. 3.75"
3 143-9080-E $48.90
(200 mm) (196-204 mm) (1,2 bar) (12 M) (95.3 mm)
Inside of Pipe Plug
4" 3.8"-4.06" 17 psi 40 ft. 2.5"
1 143-9040 $9.50
(100 mm) (96-103 mm) (1,2 bar) (12 M) (63.5 mm)
6" 5.77"-6.08" 17 psi 40 ft. 3.75"
2 143-9060 $25.70
(150 mm) (147-154 mm) (1,2 bar) (12 M) (95.3 mm)
8" 7.7"-8.03" 17 psi 40 ft. 3.75"
3 143-9080 $48.90
(200 mm) (196-204 mm) (1,2 bar) (12 M) (95.3 mm)
Always block plugs when conducting air tests

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, High Impact ABS Wing Nut, Pipe Sizes: 1.5" to 4", 144-1 Series
To be used for DWV Testing and Stack Testing
These Plugs can be used in a variety of applications including DWV (drain, waste and vent) testing
and stack testing.
Features:
● Ideal for sewer testing and long-term applications
● Made with high impact ABS material
● End of pipe design seals only at the end of a pipe
● End of pipe design won't fall into the pipe.
Equipped with:
● Easy to install extra large zinc wing nut - won't rust
● Neoprene rubber o-ring
Shpg Unit
Wt Price
Nominal Size Range of Use Maximum Back Pressure lbs Item Number Each
End of Pipe Plug
1 1/2" 1.48"-1.65" 5 psi 11 ft.
1 144-1015-E $4.15
(40 mm) (39-42 mm) (0.34 bar) (3 M)
2" 1.9"-2.17" 5 psi 11 ft.
1 144-1020-E $4.75
(50 mm) (49-55 mm) (0.34 bar) (3 M)
4" 3.8"-4.06" 5 psi 11 ft.
1 144-1040-E $7.85
(100 mm) (96-103 mm) (0.34 bar) (3 M)
Always block plugs when conducting air tests

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Remote Placement Expander, Pipe Sizes: 0.57" to 2", 148-3 Series
Install Plug Into Pipeline and Remove Handle
Typical Uses Include:

● Block pipeline against tampering and gas theft
● Test pipeline for leakage
● Test intermediate pressure regulator
These plugs come with a Nitrile rubber seal.
These plugs are not pressure rated and customer must determine application suitability
Remote Placement Expander Plugs
Shpg Unit
Plug Diameter Expanded
Wt Item Price
0.57 14 0.75 19 1 148-3050 $13.10
0.75 19 1 25 1 148-3075 $13.10
1 25 1.25 31 1 148-3100 $15.00
1.25 31 1.5 38 1 148-3125 $15.00
1.5 38 1.75 44 1 148-3150 $15.00
2 50 2.25 57 1 148-3200 $16.90
Wrenches (All wrenches will fit all plug sizes)

Length Shpg Unit
Item
Wt Price
in mm Number
lbs Each
7 177 1 148-3007 $101.10
12 305 1 148-3012 $104.90
18 457 2 148-3018 $123.60
24 610 3 148-3024 $131.10
INSTALLATION INSTRUCTIONS
1. Slip the plug onto the end of the wrench engaging pin "A" into the slot at the end of the wrench.
2. Turn the pin "A" into notch "B". This will hold the plug onto the end of the wrench.
3. Turn the wrench handle "F" clockwise with one hand while holding the wrench at "G" with the other until pin "D" on the wrench drops into
the hole "E" in the Expander plug nut.
4. Insert the plug into the fitting or pipe.
5. Hold the wrench at "G" and turn the handle "F" clockwise to expand the plug.
To remove the wrench just push in on the wrench and turn clockwise enough to let pin "A" out of notch "B" and out the slot at the end of the
wrench.
REMOVAL INSTRUCTIONS
1. Slip notch in end of wrench over pin "A" and turn wrench right engaging pin "A" into notch at "C."
2. Hold the wrench at "G" with one hand and turn the wrench handle "F" counter clockwise to release the plug.
3. Remove the plug with the wrench.
Only hand tighten the plug to prevent damage to the wrench or plug. In expanding the plug, don't use any extra leverage on the wrench handle "F"
as it is not necessary to tighten the plug any tighter than the ordinary man can pull on handle "F." Any extra leverage would tend to damage the
wrench or the plug.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Hand Tightening Aluminum Body Test With & Without By-Pass,
Pipe Sizes: 1.5" to 12", 149-1 & 149-2 Series
Mechanical Test Plugs with by-pass for all low pressure sealing requirements
Precision Aluminum and Steel And Molded Rubber For Tight Seal Single test plugs for all low pressure sealing requirements. These plugs are not
pressure rated and customer must determine application suitability. Natural rubber. Replacement rubber and other rubber compounds also
available.
Single Size Test Plugs with By-pass
Single Test Plugs with Flow-Thru 1-1/2" - 8" Diameter. Easy to use for testing or sealing a variety of pipes and fittings.
Short, hollow stems allow easier turning in pipes and permit filling or draining without removing the plug.
Single Test Plugs 10" - 12" Diameter with Flow-Thru. Designed with a lever-type handle to easily expand molded
rubber sealing ring. Hollow stems allow filling or draining without removing plug.
Pipe Diameter Maximum Pressures* By-Pass Shpg Unit
Nominal Maximum Relaxed Maximum Maximum Total Size Wt Item Price
in mm in mm in mm Pipe Head Force Area in lbs Number Each
1.5 38 2.1 53 1.5 38 25 psig 57 ft 213 1.7 sq in 3/8" 1 149-101 $35.95
2 50 2.25 57 1.8 45 25 psig 57 ft 412 3.3 sq in 3/8" 1 149-102 $35.95
3 76 3.25 82 2.75 69 25 psig 57 ft 945 7.0 sq in 3/8" 2 149-103 $39.15
4 101 4.15 105 3.75 95 25 psig 57 ft 438 12.5 sq in 1/2" 2 149-104 $45.85
5 127 5.25 133 4.65 118 25 psig 57 ft 488 19.5 sq in 1/2" 3 149-105 $87.25
6 152 6.5 165 5.8 147 10 psig 23 ft 560 28.0 sq in 1/2" 4 149-106 $101.15
8 203 8.25 209 7.85 199 5 psig 11 ft 404 50.5 sq in 1/2" 8 149-108 $128.80
10 254 10.6 269 10.15 257 n/a n/a n/a 78.5 sq in 3/4" 13 149-110 $319.25
12 304 12.7 322 12.1 307 n/a n/a n/a 113.0 sq in 3/4" 16 149-112 $357.15
Flexible Double Test Plugs

1-1/2" - 8" Diameter, Center to Center Distances to 96".
Plug does the work of three plugs in one. Both balls on the 1-1/2" and 2" plugs release with the same
handle, the lower ball, however, releases before the upper ball. The 3" - 8" sizes have two handles so
each ball can be released separately.
Typical Installations
The ball is molded of pure rubber, molded parallel ridges insure perfect seal. Castings are of non-rust
aluminum. Handles are of coated steel. All parts are replaceable. Blowouts and water damage are prevented because the Plug allows the system
Pipe Diameter Maximum Pressures* Shpg Unit

Nominal Maximum Relaxed Maximum Maximum Total Center Wt Item Price
in mm in mm in mm Pipe Head Force To Center lbs Number Each
1.5 38 1.75 44 1.55 39 25 psig 57 ft 213 12" 2 149-201 $133.60
2 50 2.1 53 1.8 45 25 psig 57 ft 412 12" 3 149-202 $133.80
3 76 3.25 82 2.75 69 25 psig 57 ft 945 12" 6 149-203 $145.55
4 101 4.15 105 3.75 95 25 psig 57 ft 438 12" 8 149-204 $153.95
5 127 5.25 133 4.75 120 10 psig 23 ft 488 16" 8 149-205 $262.40
6 152 6.5 165 5.85 148 10 psig 23 ft 560 16" 11 149-206 $275.75
8 203 8.25 209 7.85 199 5 psig 11ft 404 22" 20 149-208 $374.15

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, EZ-Swet Line Stopper, Pipe Sizes: 1/2" to 4", 148-0 Series
Repair without draining the entire water system
● These plugs have a molded silicone/epdm composite rubber seal.

● With this plug, you can go into any situation and have immediate control of the water system
● Do the pipe repair as soon as you get to the job. No waiting for water to completely drain.
● Have immediate control over draining or siphoning water.
● Keep costs down so you can secure more "Contract" work.
● Never lose money on "Contract" work due to uncontrollable draining water.
● Service hotels, motels, and apartments more easily.
● The EZ-Swet easily pays for itself in one or two jobs.
● Maximum 60 psig water pressure. Open valve and let water run to reduce pressure if necessary.
Single Size Line Stopper Plugs Without By-Pass

Pipe Diameter Relaxed By-Pass Handle Length Shpg Unit
Item
Size Wt Price
in mm in mm in Number
in lbs Each
0.5 12 0.465 11.81 6.38 1 148-0005 $53.80
0.75 19 0.65 16.51 7 1 148-0007 $57.90
1 25 0.86 21.84 7 1 148-0010 $59.80
1.25 31 1.185 30.1 8.5 1 148-0012 $70.60
1.5 38 1.41 35.81 8.5 1 148-0015 $74.50
2 50 1.77 44.96 10.5 2 148-0020 $87.30
2.5 63 2.3 58.42 12.5 3 148-0025 $289.60
3 76 2.75 69.85 12.5 4 148-0030 $340.20
4 101 3.8 96.52 16 5 148-0040 $401.00
Single Size Line Stopper Plugs With By-Pass
2.5 63 2.3 58.42 0.5 13.5 3 148-0025-8 $419.40
3 76 2.75 69.85 0.5 13.5 4 148-0030-8 $513.50
4 101 3.8 96.52 0.5 17 5 148-0040-8 $605.60
EZ-Swet By-Pass Plugs are built with a 1/2" cavity down the center of the tool to allow water or air to drain from the system while the repair
is in progress. They are made from the same "professional grade" materials as the EZ-Swet and have a hose connection attached to the end
of the hollow handle. This connection allows you to attach a garden hose to the end of the tool which directs the draining water to a floor
sink or gutter while you continue the repair. Another feature of this plug is not only can water be drained, but in instances of working on
pools or similar projects, an air supply at a maximum of 60 lbs. can be added through the plug into the plumbing system for pressure
testing. These plugs are cleaner, more controllable, multi functional, and effect a quicker repair on any system. These by-pass plugs are not
made for line testing as there may be slight seepage past the tightening stem.
Maximum 60 psig water pressure. Open valve and let water run to reduce pressure if necessary.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, High Pressure Test, Pipe Sizes: 2.469" to 144", 145-9 Series
Available with solid rubber seals or Inflatable Line Stop™ seals. Easy installation, replaceable
seals, lightweight aluminum, positive seal and hold against line pressure
● Available with solid rubber seals or Inflatable Line Stop™ seals. Easy installation, replaceable seals, lightweight aluminum, positive seal and
hold against line pressure.
● Typical Applications: Force and water main, lift stations, nuclear cooling lines, fire protection lines, special plant situations, irrigation supply
lines, and many other projects where isolation is required for testing and construction.
● These Plugs may be manufactured for almost any pressure and for rectangular or other shaped opening.
Note: Rated pressures listed are for steel pipe only. Other pipe materials would have a lower pressure rating or require additional restraints.
Pipe Size By-Pass By-Pass

Maximum* Port Shpg Unit Pipe Size Maximum* Port Shpg Unit
Maximum Minimum Head Pressure Maximum Minimum Head Pressure
in npt Wt Repl Item Price in npt Wt Repl Item Price
in mm in mm psig ft lbs Seal Number Each in mm in mm psig ft lbs Seal Number Each
2.625 66 2.469 62 200 460 1/8 F 2 $134 145-9024 $467 13.375 339 12.625 320 100 230 1 1/2 F 34 $676 145-9126 $2,368
2.812 71 2.625 66 200 460 1/8 F 2 $143 145-9026 $499 14.125 358 13.375 339 100 230 1 1/2 F 34 $715 145-9133 $2,502
3 76 2.812 71 200 460 1/8 F 2 $152 145-9028 $532 14.875 377 14.125 358 100 230 1 1/2 F 40 $749 145-9141 $2,621
3.188 80 3 76 200 460 1/8 F 3 $162 145-9030 $566 15.625 396 14.875 377 100 230 1 1/2 F 44 $791 145-9148 $2,769
3.375 85 3.188 80 200 460 1/8 F 3 $172 145-9031 $598 16.375 415 15.625 396 100 230 1 1/2 F 44 $829 145-9156 $2,900
3.562 90 3.375 85 200 460 1/8 F 3 $181 145-9033 $632 17.125 434 16.375 415 100 230 2F 63 $866 145-9163 $3,034
3.75 95 3.562 90 200 460 1/8 F 3 $209 145-9035 $665 17.875 454 17.125 434 100 230 2F 63 $904 145-9171 $3,167
4.125 104 3.75 95 200 460 1/4 F 3 $209 145-9037 $732 18.875 479 17.875 454 100 230 2F 65 $955 145-9178 $3,344
4.5 114 4.125 104 100 230 1/4 F 3 $229 145-9041 $798 19.875 504 18.875 479 100 230 2F 65 $1006 145-9188 $3,521
4.875 123 4.5 114 100 230 1/4 F 4 $257 145-9045 $865 20.875 530 19.875 504 100 230 2F 70 $1056 145-9198 $3,698
5.25 133 4.875 123 100 230 1/4 F 4 $266 145-9048 $931 21.875 555 20.875 530 100 230 2 1/2 F 75 $1107 145-9208 $3,875
5.625 142 5.25 133 100 230 1/4 F 5 $285 145-9052 $998 22.875 581 21.875 555 100 230 2 1/2 F 78 $1157 145-9218 $4,052
6 152 5.625 142 100 230 1/2 F 5 $304 145-9056 $1,063 23.875 606 22.875 581 100 230 2 1/2 F 85 $1208 145-9228 $4,229
6.375 161 6 152 100 230 1/2 F 6 $322 145-9060 $1,130 24.875 631 23.875 606 100 230 2 1/2 F 96 $1359 145-9238 $4,759
6.75 171 6.375 161 100 230 1/2 F 6 $339 145-9063 $1,196 25.875 657 24.875 631 100 230 2 1/2 F 105 $1412 145-9248 $4,945
7.125 180 6.75 171 100 230 1/2 F 7 $361 145-9067 $1,263 26.875 682 25.875 657 100 230 3F 113 $1467 145-9258 $5,142
7.625 193 7.125 180 100 230 3/4 F 8 $387 145-9071 $1,352 27.875 708 26.875 682 100 230 3F 120 $1522 145-9268 $5,333
8.125 206 7.625 193 100 230 3/4 F 10 $411 145-9076 $1,440 28.875 733 27.875 708 100 230 3F 130 $1577 145-9278 $5,524
8.625 219 8.125 206 100 230 3/4 F 11 $436 145-9081 $1,529 29.875 758 28.875 733 100 230 3F 140 $1631 145-9288 $5,715
9.125 231 8.625 219 100 230 3/4 F 12 $462 145-9086 $1,617 30.875 784 29.875 758 100 230 3F 146 $1686 145-9298 $5,907
9.625 244 9.125 231 100 230 3/4 F 14 $487 145-9091 $1,706 31.875 809 30.875 784 100 230 3F 152 $1741 145-9308 $6,098
10.125 257 9.625 244 100 230 1F 17 $512 145-9096 $1,793 32.875 835 31.875 809 100 230 3F 158 $1795 145-9318 $6,289
10.625 269 10.125 257 100 230 1F 17 $537 145-9101 $1,882 33.875 860 32.875 835 100 230 3F 165 $1850 145-9328 $6,480
11.125 282 10.625 269 100 230 1F 31 $563 145-9106 $1,971 34.875 885 33.875 860 100 230 3F 170 $2118 145-9338 $7,413
11.875 301 11.125 282 100 230 1F 31 $602 145-9111 $2,104 35.875 911 34.875 885 100 230 3F 176 $2177 145-9348 $7,625
12.625 320 11.875 301 100 230 1F 31 $639 145-9118 $2,237

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Bolt Type Medium Pressure Test With By-Pass,
Pipe Sizes: .28" to 10.5", 146-9 Series
Simple, reliable testing of a pipeline
● Typical Applications: Designed for simple, reliable testing of pipe and tubing to 250 psig (17 bar), without the tube wall damage associated with other test plugs.
That's because our Bolt Type Plugs feature a Nitrile seal - the only part of the plug that comes in contact with the tube I.D. To use, simply install into the open
end of the pipe or tube and tighten the large compression nut to expand the seal element. Then begin testing.
● Plug sizes smaller than .375" come standard with Neoprene seals, others are Nitrile seals for hydrocarbon resistance. Plated carbon steel.
note: caps are not included with these plugs - please see Pipe Plugs and Packers Accessories page.
**Pipe I.D. Size Range Nom Relaxed Unit

Rated By-Pass Shpg
Pipe Seal Item Price
Minimum Maximum Pressure* Connection Overall Length
Size Length Wt Number Each
in mm in mm in psig bar NPT in mm in lbs
0.28 7.1 0.299 7.6 250 17 1/8M 4.25 108 1.125* 1 146-00030 $237
0.3 7.6 0.329 8.4 250 17 1/8M 4.25 108 1.125* 1 146-00033 $237
0.33 8.4 0.369 9.4 250 17 1/8M 4.25 108 1.125* 1 146-00037 $237
0.375 9.5 0.406 10.3 300 21 1/8M 5 127 2 1 146-90040 $233
0.406 10.3 0.44 11.2 3/8 S40 300 21 1/8M 5 127 2 1 146-90044 $233
3/8" S40
0.44 11.2 0.51 13 300 21 1/8M 5 127 2 1 146-90051 $233
1/2" S160
0.51 13 0.562 14.3 1/2" S80 300 21 1/8M 5 127 2 1 146-90056 $137
1/2" S40
0.562 14.3 0.625 15.9 300 21 1/8M 5 127 2 1 146-90063 $137
3/4" S160
0.625 15.9 0.69 17.5 250 17 1/4M 6.75 127 2 1 146-90069 $137
0.69 17.5 0.76 19.3 3/4" S80 250 17 1/4M 6.75 171 2 1 146-90075 $144
3/4” S40
0.76 19.3 0.83 21.1 250 17 1/4M 6.75 171 2 1 146-90083 $144
1 S160
0.83 21.1 0.89 22.6 250 17 1/4M 6.75 171 2 1 146-90088 $144
0.89 22.6 1.01 25.7 1 S80 250 17 1/4M 6.75 171 2 1 146-90100 $153
1.01 25.7 1.13 28.7 1 S40 250 17 1/4M 6.75 171 2 1 146-90113 $153
1.13 28.7 1.26 32 1-1/4 S160 200 14 1/4M 8 171 2.5 1 146-90125 $171
1-1/4 S40
1.26 32 1.38 35.1 1-1/4 S80 200 14 1/4M 8 171 2.5 1 146-90138 $171
1-1/2 S160
1.38 35.1 1.51 38.4 1-1/2 S80 200 14 1/4M 8 171 2.5 1 146-90150 $191
1.51 38.4 1.63 41.4 1-1/2 S40 150 10 3/8M 9.5 241 3 1 146-90163 $191
1.63 41.4 1.76 44.7 2 S160 150 10 3/8M 9.5 241 3 1 146-90175 $191
1.76 44.7 1.88 47.8 150 10 3/8M 9.5 241 3 1 146-90188 $191
1.88 47.8 2.01 51.1 2 S80 150 10 3/8M 9.5 241 3 1 146-90200 $191
2 S40
2.01 51.1 2.18 55.4 100 7 3/8M 9.5 241 3 2 146-90218 $275
2-1/2 S160
2.18 55.4 2.31 58.7 100 7 3/8M 9.5 241 3 2 146-90231 $275
2-1/2 S40
2.31 58.7 2.51 63.7 100 7 3/8M 9.5 241 3 2 146-90250 $297
2-1/2 S80
2.51 63.7 2.69 68.3 3 S160 100 7 3/8M 9.5 241 3 2 146-90269 $297
2.69 68.3 2.88 73.2 100 7 3/8M 9.5 241 3 2 146-90288 $297
3 S40
2.88 73.2 3.07 78 100 7 3/8M 9.5 241 3 2 146-90307 $297
3 S80
3.07 78 3.26 82.8 80 6 3/8M 9.5 241 3 2 146-90326 $333
3-1/2 S80
3.26 82.8 3.51 89.2 80 6 3/8M 9.5 241 3 2 146-90351 $333
4 S160
3.51 89.2 3.76 95.5 3-1/2 S40 80 6 3/8M 9.5 241 3 2 146-90376 $368
4 S40
3.76 95.5 4.06 103.1 80 6 3/8M 9.5 241 3 2 146-90406 $368
4 S80
4.45 113 4.5 114.5 40 2.8 3/8M 4.63 117.5 1.75* 4.5 146-90450 $431
4.95 125.7 5 127 25 1.7 1/2M 6.75 171.5 3.00* 13 146-90500 $534
5.34 138.4 5.5 139.7 25 1.7 1/2M 6.75 171.5 3.00* 13 146-90550 $534
5.95 151.1 6 152.4 25 1.7 1/2M 6.75 171.5 3.00* 13 146-90600 $534
6.45 163.8 6.5 165.3 25 1.7 1/2M 6.75 171.5 3.00* 13 146-90650 $666
6.95 176.5 7 177.8 15 1 3/4M 7.38 187.4 3.50* 28.5 146-90700 $837
7.95 201.9 8 203.2 15 1 3/4M 7.38 187.4 3.50* 28.5 146-90800 $837
9.95 252.7 10 254 10 0.7 3/4F 6.13 155.7 2.50* 40 146-91000 Call
10.45 254.43 10.5 267 10 0.7 3/4F 6.13 155.7 2.50* 40 146-91050 Call
Continued next page for additional sizes and material notes
Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Bolt Type Medium Pressure Test With By-Pass,
Pipe Sizes: .28" to 10.5", 146-9 Series (Continued)
These plugs come standard with Nitrile Seals.

**Add suffix to part number:
"S" for Silicone
"V" for Fluoro-elastomer
**Also add second suffix for I.D. of test pipe. (Plug O.D. will be 0.03" smaller than pipe I.D.)
Custom Configurations
These plugs are available with a variety of seal material including Nitrile, EPDM, Viton, Silicone, and Polyurethane for most size, pressure,
temperature, and chemical requirements.
The 146-9 Series Plugs are generally made with an aluminum body and steel hardware but are available with many other materials for your specific
requirements.
They are available with or without by-pass (vent), valves, remote placement systems, sub sea installation, and many other configurations.
See www.petersenproducts.com/146-9_pipe_plug.aspx for further custom examples
Please call us and let us quote on your specific requirements 800-926-1926
High Pressure Caps for 146-9 and 147 Series Plugs

Shpn Unit Price
Description Wgt Lbs Item Number Each
High Pressure Caps for 1/8" MNPT 1 936-1467-013 US$23.00
High Pressure Caps for 3/4" FNPT 1 936-1467-075F US$35.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, Bolt Type High Pressure Test, Pipe Sizes: .53" to 24", 147 Series
High Pressure Test Plugs use the test pressure to help

seal more securely against the pipe's inner diameter
Typical Applications: Force and water main, lift stations, nuclear cooling lines, fire protection lines, special
plant situations, irrigation supply lines, and many other projects. Plugs pictured with optional high
pressure caps.
By-Pass Pipe I.D. Size Range *Maximum Test Std. Seal Shaft Shpg Unit
Nominal Pipe Connection Maximum Minimum Pressure (2)(3) Mat'l Qty Installation Depth Overall Length Wt Item Price
Size Sched NPT in mm in mm psig bar (4) in mm in mm lbs Number Each
2.5 80/XS 3/8M 2.45 62.2 2.27 57.7 5,900 410 U 1 2.88 73 7 177.8 4 147-0025-P80 $449
3 XXS 3/8M 2.45 62.2 2.27 57.7 11,100 770 U 1 2.88 73 7 177.8 4 147-0030-PXXS $450
2.5 40 / STD 1/2M 2.54 64.5 2.44 62 4,200 290 U 1 3 76.2 9 227 6 147-0025-P40 $449
2.5 10 1/2M 2.74 69.6 2.6 66 2,400 170 U 1 3.31 84.1 9 227 7 147-0025-P10 $710
3 160 1/2M 2.74 69.6 2.6 66 7,800 540 U 1 3.31 84.1 9 227 7 147-0030-P160 $710
2.5 5 1/2M 2.78 70.6 2.68 68.1 1,600 110 U 1 3 76.2 9 227 7 147-0025-P5 $710
3.5 XXS 1/2M 2.89 73.4 2.7 68.6 10,200 700 U 1 3.5 88.9 9 227 8 147-0035-PXXS $710
3 80/XS 1/2M 2.98 75.7 2.87 72.9 5,200 360 U 1 3.19 81 9 227 8 147-0030-P80 $537
3 40 / STD 1/2M 3.14 79.8 3.04 77.2 3,700 260 U 1 3.19 81 9 227 8 147-0030-P40 $507
4 XXS 1/2M 3.32 84.3 3.12 79.2 9,500 660 U 1 3.81 96.8 9 227 9 147-0040-PXXS $848
3 10 1/2M 3.34 84.8 3.23 82 2,000 140 U 1 3.19 81 9 227 9 147-0030-P10 $848
3 5 1/2M 3.41 86.6 3.3 83.8 1,400 100 U 1 3.19 81 9 227 9 147-0030-P5 $848
3.5 80/XS 1/2M 3.44 87.4 3.33 84.6 4,800 330 U 1 3.31 84.1 9 227 9 147-0035-P80 $848
4 160 1/2M 3.57 90.7 3.41 86.6 7,400 510 U 1 3.69 93.7 9 227 10 147-0040-P160 $848
3.5 40 / STD 1/2M 3.63 92.2 3.52 89.4 3,300 230 U 1 3.31 84.1 9 227 10 147-0035-P40 $848
4 120 1/2M 3.74 95 3.6 91.4 6,000 410 U 1 3.63 92.1 9 227 11 147-0040-P120 $848
3.5 10 1/2M 3.84 97.5 3.73 94.7 1,700 120 U 1 3.31 84.1 9 227 11 147-0035-P10 $848
3.5 5 1/2M 3.91 99.3 3.8 96.5 1,200 80 U 1 3.56 90.5 9 227 12 147-0035-P5 $771
4 80/XS 1/2M 3.91 99.3 3.8 96.5 4,500 310 U 1 3.56 90.5 9 227 12 147-0040-P80 $771
4 40 / STD 1/2M 4.11 104.4 4 101.6 3,100 210 U 1 3.63 92.1 9 227 12 147-0040-P40 $771
5 XXS 1/2M 4.25 108 4.03 102.4 8,500 590 U 1 4.31 109.5 9 227 14 147-0050-PXXS $1,071
4 5 3/4M 4.47 113.5 4.28 108.7 1,100 80 N 1 4.69 119.1 10.13 257.2 18 147-0040-P5 $1,080
5 160 3/4M 4.47 113.5 4.28 108.7 7,000 480 N 1 4.69 119.1 10.13 257.2 18 147-0050-P160 $1,080
5 120 3/4M 4.69 119.1 4.53 115.1 5,500 380 N 1 4.56 115.9 10.13 257.2 20 147-0050-P120 $1,161
5 80/XS 3/4M 4.91 124.7 4.78 121.4 4,000 280 N 1 4.44 112.7 10.13 257.2 21 147-0050-P80 $1,161
6 XXS 3/4M 5.11 129.8 4.87 123.7 8,200 570 N 1 5.06 128.6 10.13 257.2 21 147-0060-PXXS $1,161
5 40 / STD 3/4M 5.14 130.6 5.02 127.5 2,700 190 N 1 4.44 112.7 10.13 257.2 22 147-0050-P40 $1,161
6 160 3/4M 5.37 136.4 5.16 131.1 6,700 460 N 1 5 127 10.13 257.2 26 147-0060-P160 $1,161
5 10 3/4M 5.39 136.9 5.27 133.9 1,400 100 N 1 4.44 112.7 10.13 257.2 24 147-0050-P10 $1,161
5 5 3/4M 5.44 140 5.32 135.1 1,100 80 N 1 4.44 112.7 10.13 257.2 24 147-0050-P5 $1,161
See www.petersenproducts.com for complete range of sizes .53” to 24”

Other sizes and seal material available
See Previous page for high pressure caps
IMPORTANT:
1. M = Male NPT, F = Female NPT
2. NEVER use a test pressure greater than the weakest component in the system can handle. Test Pressure specified in table is equivalent to 80% of the pressure that
will yield ASTM A106 Grade B pipe. The test pressure for higher and lower strength pipes will differ proportionally. The maximum test pressure for higher strength
pipe must never exceed the highest test pressure listed for that pipe O.D.
3. Sizes that do not have a test pressure listed differ from standard pipe sizes. These plug sizes are normally used to test tubing. For use of these plug sizes in tubing
with a minimum yield strength of 35ksi, the maximum test pressure is estimated by the test pressure listed for the equivalent or next larger pipe O.D. with the
equivalent or next thinner wall thickness. The test pressure for higher and lower strength tubes will differ proportionally. The maximum test pressure for higher
strength tubes must never exceed the highest test pressure listed for the equivalent or next larger pipe size. NEVER use a test pressure greater than the weakest
component in the system can safely handle.
4. Standard Seal Material: U = Urethane, N = Neoprene
5. These plugs were designed to operate in A106 grade B pipe with a hardness up to 20 on the Rockwell C scale (HRC 20). Plugs may be customized for hardness to
HRC 25. Plugs for other hardness ratings require a customers pipe sample and further pressure testing.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, High Lift Flange Weld Test, Pipe Sizes: 3/4" to 24", 151 Series
Steam, sniff, purge, weld and test - all with the same plug
The new and approved "High Lift" seal design permits greater seal to pipe clearance and higher seal
expansion. This means the plug will easily pass over weld penetration. Grinding out deep root
penetrations is eliminated.
This plug will reduce the expense, downtime delays, and waste disposal problems associated with
conventional flange-to-pipe weld testing. Our High Lift Flange Weld Test Plug lets you monitor
downstream conditions, isolate and purge the weld area, perform the weld, and hydro test weld joint
to ANSI B16.5 requirements using only one tool. No blind flanging upstream, no vacuum truck for
evacuating the line, and no X-raying. Just a simple, rock-solid tool that saves time and money every
time you use it. Each test requires a minimum amount of water and there's no need to fill the entire
line. You'll use less water and minimize your environmental liabilities.
● Fast, easy installation, and testing.
● Segmented compression tube allows adjustment of seal installation depth.
● Faster pipe repairs and retrofits.
● Improved Seal-to-Pipe Clearance: Plug can be easily installed and removed, even where there is severe weld protrusion.
● Low water requirements resulting in less waste water.
● A minimum of 1.5:1 safety factor.
● Rugged, heavy-duty construction.
● Versatile: Seal and washer sets easily change to accommodate different pipe schedules.
● Ported Center Shaft: Permits monitoring of downstream pressure of inert gas rejection.
● Flange classes 150 - 600 lbs.
● Seal Materials: Urethane Standard.
● Flange style is Raised Face type.
● Test plugs do not include flange gaskets or nuts & bolts.
Maximum Test Pressures Pipe Size Crowfoot Wrench or Socket Size

ANSI Maximum psig 3/4" to 1" 9/16" Crowfoot Wrench
Flange Class psi bar 1 1/4" to 2" 15/16" Crowfoot Wrench
150 450 30.9 2 1/2" to 4" 2" Deep Impact Socket
300 1125 77.2 6" to 8" 3 1/8" Deep Impact Socket
600 & up 1125* 77.2* 10" to 24" 1 5/8" Deep Impact Socket
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Mechanical, High Lift Flange Weld Test, Pipe Sizes: 3/4" to 24", 151 Series (Continued)
Steam, sniff, purge, weld and test - all with the same plug
L1-A Welding L1-B Test

Seal Vent & Fill Plug Plug Unit
Flange to Pipe Clearance Port Size Application Application L2 Max L3 L4 Shpg Price
Size Class Pipe Wt Item Each
in mm in npt in mm in mm in mm in mm in mm
in lb Sched lbs Number
150 160 0.05 1.3 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 8 151-1007-P160 $876
150 80 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 8 151-1007-P80 $876
150 40 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 8 151-1007-P40 $876
150 10 0.07 1.8 1/8F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 8 151-1007-P10 $876
300 160 0.05 1.3 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-3007-P160 $894
3/4 DN20 300 80 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-3007-P80 $894
300 40 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-3007-P40 $894
300 10 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-3007-P10 $894
600 160 0.05 1.3 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-6007-P160 $915
600 80 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-6007-P80 $915
600 40 0.07 1.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-6007-P40 $915
600 10 0.07 1.8 1/8 F 12 3048 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-6007-P10 $915
150 XXS 0.04 1 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-1010-PXXS $884
150 160 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-1010-P160 $884
150 80 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-1010-P80 $884
150 40 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-1010-P40 $884
150 10 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 9 151-1010-P10 $884
1 DN25
300 XXS 0.04 1 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-3010-PXXS $897
300 160 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-3010-P160 $897
300 80 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-3010-P80 $897
300 40 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-3010-P40 $897
300 10 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-3010-P10 $897
600 XXS 0.04 1 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-6010-PXXS $930
600 160 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-6010-P160 $930
600 80 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-6010-P80 $930
600 40 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-6010-P40 $930
600 10 0.11 2.8 1/8 F 12 304.8 3 76.2 14.25 362 1.25 31.8 24.6875 627.1 11 151-6010-P10 $930
150 160 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 10 151-1012-P160 $1,082
150 80 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 10 151-1012-P80 $1,082
150 40 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 10 151-1012-P40 $1,082
1 1/4
150 10 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 10 151-1012-P10 $1,082
DN32
300 160 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-3012-P160 $1,088
300 80 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-3012-P80 $1,088
300 40 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-3012-P40 $1,088
300 10 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-3012-P10 $1,088
600 160 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-6012-P160 $1,140
600 80 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-6012-P80 $1,140
600 40 0.13 3.3 1/8 F 12 304.8 3.375 85.7 15 381.2 1.625 41.3 20.3750 517.5 13 151-6012-P40 $1,140
See www.petersenproducts.com for complete range of sizes 3/4” to 24”

* Seal-to-pipe clearance: approximately 1/2". Clearance may be slightly smaller on plugs that accommodate more than one schedule size.
Replacement washers: required on all schedule sizes except for the smallest ID for each size pipe.
** External O-ring: included on 10" and 12" seals.
Other flange class ratings and pipe schedules available upon request. Call for pricing.
Ordering information needed: flange size and rating, pipe ID or schedule, and test pressure.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipe Plugs, Redwood Tapered, Pipe Sizes: ½” to 8” 140-1 Series
Fast inexpensive way to seal a leak in gas and water lines
Redwood pipe plugs work equally well for both gas and water lines, and are a
fast inexpensive way to seal a leak. Redwood tapered plugs for emergency pipe
repair are most commonly used by gas companies, fire departments, and
municipal water departments. Environmentally friendly.
Shpng Unit
Wgt Item
Pipe Size Taper Length Price
Lbs Number
Each
1/2" - 1-1/4" 1 1/2" - 3/8" 5-1/2" 1 140-10125 $4.60

3/4" - 1-1/2" 1 7/8" - 1/2" 6" 1 140-10150 $7.70
2" 2 1/2" - 1 5/8" 6" 1 140-10200 $11.30
3" 3 1/2" - 2 1/2" 6" 2 140-10300 $16.10
4" 4 1/2" - 3 1/2" 6" 3 140-10400 $27.00
5" 6" - 4 5/8" 4" 3 140-10504 $29.00
6" 6 7/8" - 5 3/8" 8" 3 140-10608 $62.50
6" 7" - 5 3/8" 4" 3 140-10604 $36.10
8" 9" - 7 1/2" 10" 8 140-10810 $158.50
8" 9" - 7" 4" 5 140-10804 $92.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pipeline Joint Testers, Pipe Sizes: 24” to 120”, 145-8 Series
An efficient way to test joints!
These pipeline joint testers are fast, safe, and easy to use - a five second test can determine the
joint integrity. Designed to test large diameter, installed, pre-cast concrete pipe as described in
ASTM C1103. Ready to test with water or air straight from the factory - no modifications are
needed. Pre-test before backfilling. Capable of testing to 15 psi air or 50 psi water.
Features:
● Sleeveless, lightweight aluminum design allows for easy assembly in manholes
● Independent, adjustable wheels - easy to move
● Quick-connect control panel is simple to install and remove, plus the top-mountng feature
won't interfere with laser usage
● Available with or without control panel and wheel kit
● Replacement end elements are available
● Recommended for testing pipe 24" and larger
● Made with natural rubber
Shpg Unit
Nominal Size Product Diameter
Wt Item Price
24 609 22 558 192 145-8024 $4,890
27 685 25 635 202 145-8027 $5,080
30 762 28 711 212 145-8030 $5,140
33 838 31 787 222 145-8033 $5,310
36 914 34 863 232 145-8036 $5,460
39 990 37 939 237 145-8039 $5,680
42 1066 40 1016 263 145-8042 $5,990
48 1219 46 1168 257 145-8048 $6,320
54 1371 52 1320 262 145-8054 $6,640
60 1524 58 1473 267 145-8060 $7,180
66 1676 64 1625 297 145-8066 $7,500
72 1828 70 1778 420 145-8072 $7,930
78 1981 76 1930 462 145-8078 $8,470
84 2133 82 2082 510 145-8084 $9,420
90 2286 88 2235 503 145-8090 $10,390
96 2438 94 2387 565 145-8096 $11,030
102 2590 100 2540 565 145-8102 $11,780
108 2743 106 2692 565 145-8108 $12,420
120 3048 118 2997 600 145-8120 $13,820

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Lift Bags, Inflatable 145 or 116 PSI High Pressure HD Duty Bags and Accessories,
Sizes: 6" x 36", 161-5 Series
25% higher lift capacity than a conventional lift bag of the same size
The series 161-5 high pressure heavy lifting air bags have up to 25% higher lift
capacity than a conventional lift bag of the same size. This is due to the 25% higher
inflation pressure, i.e. 145 PSI as compared to the conventional 116 PSI. In addition,
they are lighter in weight and have a lower profile with an insertion height of only
0.9”. The special rib design on the surface ensures perfect interlocking when
stacking two lift bags. Each air bag has a minimum safety factor of 4 with a burst
pressure of 580 PSI or more. They are compatible with and can be used with
conventional 116 PSI inflation control systems. 5 year limited warranty. Made of
Aramid reinforced rubber compound. Operating Temperature: -40°F to 130°F
Left - Each bag is supplied with two nipples. The bottom one is a 1/4" safety nipple (with two
ribs) and can only be used with a safety coupler which reduces the risk of possible injury or
damage due to accidental air line disconnect.The top one is a 1/4" standard industrial
interchange (SAE) nipple. Lower right in this photo is the 1/4 BSP threaded male stem which is
also removable in case of thread damage.
Heavy Duty Lifting Bags

Maximum Load Inflation Test Burst Shpg Unit
Size Thickness in Lift Height in Item Number
tons Pressure psi Pressure psi Pressure psi Wt lbs Price Each
3.54 1.80 145
6"x6" 0.86 218 580 5 161-50606 $260
3.35 1.26 116
4.5 4.40 145
8"x8" 0.86 218 580 8 161-50808 $350
4.5 3.25 116
6.9 8.80 145
12"x12" 0.86 218 580 10 161-51212 $460
6.9 6.67 116
8.7 14.3 145
15"x15" 0.86 218 580 12 161-51515 $675
8.5 11.4 116
9.60 20.00 145
17"x17" 0.86 218 580 15 161-51717 $750
9.25 15.45 116
11.6 26 145
20"x20" 0.86 218 580 20 161-52020 $850
11.0 21 116
12.6 33.0 145
22"x22" 0.86 218 580 20 161-52222 $970
12.4 26.7 116
8.50 33.0 145
13"x40" 0.86 218 580 22 161-51340 $1,200
8.26 26.7 116
13.6 42.0 145
24"x24" 0.86 218 580 25 161-52424 $1,400
13.6 33.3 116
16.1 59.0 145
30"x30" 0.86 218 580 35 161-53030 $1,900
16.0 47.5 116
18.3 74 145
33"x33" 0.86 218 580 45 161-53333 $2,200
17.0 60 116
20.3 89 145
36"x36" 0.86 218 580 50 161-53636 $2,600
20.0 72 116
See our web site for complete lifting curve charts
Continued Next Pate

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Lift Bags, Inflatable 145 or 116 PSI High Pressure HD Duty Bags and Accessories,
Sizes: 6" to 36", 161-5 Series (Continued)
Shpg Item Unit Price
Description Connections Wt lbs Number Each
Hoses
Hose, Inflation, black 3/8" ID x 16' all-weather, 1/4" Safety coupler
4 162-2038-50161 $160
with shut-off and pressure relief valve and nipple
Hose, Inflation, blue 3/8" ID x 16' all-weather, 1/4" Safety coupler

4 162-2038-50162 $160
Hose, Inflation, red 3/8" ID x 16' all-weather, 1/4" Safety coupler

4 162-2038-50163 $160
Hose, Inflation, yellow 3 /8" ID x 16' all-
1/4" Safety coupler
weather, with shut-off and pressure relief 4 162-2038-50164 $160
and nipple
valve
Hose, Inflation, green 3/8" ID x 16' all-weather, 1/4" Safety coupler
4 162-2038-50165 $160
Hose, Inflation, black 3/8" ID x 32' all-weather, 1/4" Safety coupler

6 162-2038-50321 $195
Hose, Inflation, blue 3/8" ID x 32' all-weather, 1/4" Safety coupler

6 162-2038-50322 $195
Hose, Inflation, red 3/8" ID x 32' all-weather, 1/4" Safety coupler

6 162-2038-50323 $195
Hose, Inflation, yellow 3/8" ID x 32' all-
1/4" Safety coupler
and nipple
valve
Hose, Inflation, green 3/8" ID x 32' all-
1/4" Safety coupler
and nipple
valve
Inflation Controllers
Simple controller with 145 PSI relief valve, 1/4" Safety coupler
4 162-1110-50100 $280
gauge and ball valve and nipple
Simple controller with dual145 PSI relief valve, 1/4" Safety coupler
2 162-1110-50200 $436
gauges and ball valves and nipple
Dual deadman controller with joysticks, 145 1/4" Safety coupler

162-1110-50300 $900
PSI and nipple
Relief Valves and Shut-Offs
145 PSI Relief Valve with Shutoff

1/4" Safety coupler
4 162-5210-9 $130
and nipple

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Lift Bags, Inflatable High Pressure Flat Form, Sizes: 22" to 36", 161-0 Series
Made for heavy duty, low profile heavy lifting, emergency

rescue, HAZMAT management or industrial use
The pneumatic high pressure flat form heavy lifting air bags are reinforced with Kevlar® cord for
heavy duty, low profile heavy lifting, emergency rescue, HAZMAT management or industrial use.
The Flat Form design bags eliminate the need for complicated height/weight computation
graphs and uncertain lifting height calculations. Simply stated, a 34.1 ton bag will lift 34.1 tons to
the specified height (see table). Flat Form bags safely link together when stacked, eliminating
slipping or violent ejection. Maximum of three bags can be safely stacked. Flat Form bags retain
their flat profile, eliminating rolling and shifting. Heavy duty design and Kevlar® reinforcing
insure long life.
Made of Kevlar® reinforced *NR-SBR rubber compound.

Operating Temperature: -40°F to 130°F
Flat Form Lifting Bags

Inflation Test Burst Unit
Thickness Lift Maximum Shpg
Size Pressure Pressure Pressure Item Number Price
in Height in Load Wt lbs
psi psi psi Each
22"x22" 1.1 6.7 7.7 tons 116 152 218 18 161-02222 $1,147
24"x24" 1.1 6.7 12 tons 116 152 218 23 161-02424 $1,516
31"x31" 1.1 8 20 tons 116 152 218 38 161-03131 $2,514
36"x36" 1.1 8 35 tons 116 152 218 52 161-03636 $3,768
Other length and fitting configurations also available
See Next Page for Accessories

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Lift Bags, Inflatable High Pressure Flat Form, Accessories, 161-0 Series
Hoses - Output
Shpg Item Unit Price
Description Connections
Wt lbs Number Each
Hose, Inflation, red 3/8" ID x 35' all-weather,
1/4" Safety coupler and nipple 4 162-2038-9035-2 $204.00
with shut-off and pressure relief valve
Hose, Inflation, blue 3/8" ID x 35' all-weather,

Hose, Inflation, green 3/8" ID x 35' all-weather,

Hose, Inflation, black 3/8" ID x 35' all-weather,

Hose color to match item number 1/4" Safety coupler and nipple 4 162-2038-9035-5 $204.00
Hoses - Supply
Hose, Inflation, yellow 3/8" ID x 35' all-weather,

Inflation Controllers
Controller, singe fitting, 116 psi with

1/4" Safety coupler and nipple 2 162-1011-8116 $247.00
pressure gauge and pressure relief valve
Controller, dual fitting, 116 psi with

pressure gauge and pressure relief valves
Controller, hand-held single fitting, 116 psi with

Controller, hand-held dual fititng, 116 psi with

Controller, dual joysticks, 116 psi with

1/4" Safety coupler and nipple 7 162-1032-8116 $1,010.00
built-in safety relief valves
Controller, triple deadman, 116 psi with

1/4" Safety coupler and nipple 6 162-1023-8116 $1,165.00
built-in pressure relief valves
Pressure Regulators
Pressure Regulator Air, single stage 3000 max psi inlet, CGA 346 inlet, 9/16"-18 RH outlet 4 162-1110-80310 $365.92
0-125 psi outlet CGA 345 inlet, 9/16"-18 RH outlet
Pressure Regulator Medical Air single stage
CGA 347 inlet, 9/16"-18 RH outlet 2 162-1110-80320 $409.42
5500 max psi inlet, 0-125 psi outlet
Representative picture Pressure Regulator Argon/Nitrogen/Helium single stage CGA 680 inlet, 5/8"-18 RH (F) outlet 4 162-1110-80330 $404.58
Actual may vary 5500 max psi inlet, 0-200 psi outlet
Pressure Regulator Argon/Nitrogen/Helium single stage
CGA 580 inlet, 3/8"-18NPT(M) outlet 2 162-1110-80340 $513.25
3000 max psi inlet, 0-400 psi outlet
Flat Form Bag Connectors
2-bag attchment set (4 per set) 4 162-1610-02 $112.35
3-bag attachment set (4 per set) 2 162-1610-03 $145.00

Miscellaneous
In-line Shut-off Valve, 1/4" EU safety couplers 1/4" Safety coupler and nipple 6 162-1210-8 $93.00
In-line Shut-off Valve with relief valve;

EU safety couplers

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Lift Cylinders, Inflatable MULTI-FLEX®, Sizes: 1" and Larger, 161-9 Series
Manufactured to Customer Requirements
These cylinder lift bags are manufactured to the customers requirements meeting most weight, temperature, and chemical requirements. They
can be inflated with air, an inert gas or liquid. They have been used to lift, pull, and align tubes, pipes, transformers, and other types of equipment.
They are not to be used for lifting over any personnel or where their failure would cause significant damage.
Call or send an email to let us quote an item that meets your specific requirements. Many configurations are available.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Temperature & Pressure Plugs, Pete's Plugs II, Pipe Sizes: 1/8" to 1/2", 311 Series
Take pressure or temperature readings quickly without leaving costly gauges on the line.
Applications:
Pete's Plugs are well suited for most plant and pipeline systems including hot and
chilled water systems, heat exchangers, pumps, differential readings, air, gas lines,
and many other applications. The XL Pete's Plug will allow you to insulate the test
point without adding extra fittings.
Valve Materials:
Neoprene is a chloroprene based synthetic rubber and is resistant to deterioration
from waxes, fats, oils, greases, petroleum products, and most refrigerants. Nordel is
an ethylene-propylene based synthetic rubber for hot and cold water, low steam,
detergents, phosphate esters, ketone, alcohols, and glycols. It is not suitable for petroleum products. Neoprene and nordel are proprietary
materials of others and assume no liability for results obtained or damages incurred through the application of this information. The information is
intended simply as a guide.
Size
in npt Length Body & Cap Valve Core Probe Shpg Wt Item Unit Price
Operating Instructions
in mm Material Material Dia In. lbs Number Each The cap protects the valve and provides an additional seal.
1/8 M 1.25 31 Brass Neoprene .125 0.5 311-125-00 $13.00 After the cap has been removed, either a test thermometer
1/4 M 1.5 38 Brass Neoprene .125 0.5 311-100 $8.24 or a gauge adapter with the proper pressure gauge can be
1/4 M 1.5 38 Brass Nordel .125 0.5 311-110 $8.24
inserted through the two, self-closing valves in the Pete's
1/4 M 3 76 Brass Neoprene .125 0.5 311-100-XL $15.34
1/4 M 3 76 Brass Nordel .125 0.5 311-110-XL $15.34 Plug II. Readings are made, adjustments or test can be
1/4 M 1.5 38 316 SS Neoprene .125 0.5 311-400 $71.90 accomplished and when the probes are withdrawn, the two
1/4 M 1.5 38 316 SS Nordel .125 0.5 311-410 $71.90 valves close. The protective cap is then reinstalled. Tests
3/8 M 1.5 38 Brass Neoprene .125 0.5 311-300 $19.36 should be made as quickly as possible since the valve reseal
3/8 M 1.5 38 Brass Nordel .125 0.5 311-310 $19.36 time is dependent upon time of insertion, time, and
1/2 M 1.5 38 Brass Neoprene .125 0.5 311-700 $11.28
pressure. Slower valve reseal time can be expected at lower
1/2 M 1.5 38 Brass Nordel .125 0.5 311-710 $11.28
1/2 M 3 76 Brass Neoprene .125 0.5 311-700-XL $18.62 temperature and lower pressures. Cap retaining straps are
1/2 M 3 76 Brass Nordel .125 0.5 311-710-XL $18.62 standard on all brass plugs.
Installation Instructions:
Simply install a Pressure & Temperature Plug into 1/4" or
1/2" NPT fitting to receive either a 1/16" or 1/8" OD
temperature & pressure probe.
Valve & Core Maximum Pressure &

Material Temperature Strap Color & Body Material Code Valve Body Connection
500 psig @ 32°F to 200°F
Brass Body & Neoprene Core 1,000 psig @ - 20°F to 140°F Blue Strap 1/4" mnpt
500 psig @ 32°F to 275°F

Brass Body & Nordel Core Yellow Strap 1/4", 3/8", 1/2" mnpt - Brass
1,000 psig @ - 20°F to 140°F
500 psig @ 200°F
316 Stainless Steel Body & Neoprene Core Blue Strap & Two Grooves 1/4" mnpt
1,000 psig @ - 20°F to 140°F
500 psig @ 275°F
316 Stainless Steel Body & Nordel Core Yellow Strap & Two Grooves 1/4" mnpt
1,000 psig @ - 20°F to 140°F
Accessories in two pages

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Temperature & Pressure Plugs, Pipe Sizes: 1/4" to 1/2", 310-Series
Take pressure or temperature readings quickly

These economy plugs will allow you to take pressure or temperature readings - quickly and eliminate the need for leaving costly gauges or
temperature indicators on the line.
Applications:
In general these plugs are a time and money saving device which is well suited for most plant and pipeline systems and is designed to eliminate
gauge cocks and thermometer wells. Hot and chilled water systems, heat exchangers, pumps, differential readings, air, gas lines, and numerous
other applications are only a few of the areas where these plugs are presently being used.
Valve Materials:
Neoprene is a chloroprene based synthetic rubber and is resistant to deterioration from waxes, fats, oils, greases, petroleum products, and most
refrigerants.
Nordel is an ethylene-propylene based synthetic rubber and gives excellent service in hot and cold water and in some applications of low steam.
Nordel is resistant to detergents, phosphate esters, ketone, alcohols, and glycols. It is not suitable for petroleum products.
Neoprene and nordel are proprietary materials and the

information presented herein is believed to be accurate Size Shpg Wt
and reliable. We can assume no liability for results Length
obtained or damages incurred through the application of in npt in mm Body & Cap Valve Core lbs Item Unit Price
this information. The information is intended as a guide Material Material Number Each
and if in doubt ask!
How to Operate: 1/4 M 1.5 38 Brass Neoprene 0.5 310-100 $5.04
These plugs are permanently installed in the line at

recommended test points. The cap protects the valve and
provides an additional seal. After the cap has been 1/4 M 1.5 38 Brass Nordel 0.5 310-2110 $5.04
removed, either a test thermometer or a gauge adapter
with the proper pressure gauge can be inserted through
the two, self-closing valves in the plug. Readings are
1/4 M 3 76 Brass Neoprene 0.5 310-100-XL $9.72
made, adjustments or test can be accomplished and when
the probes are withdrawn, the two valves close. The
protective cap is then reinstalled. Tests should be made as
quickly as possible since the valve reseal time is 1/4 M 3 76 Brass Nordel 0.5 310-110-XL $9.72
dependent upon time of insertion, time, and pressure.
Slower valve reseal time can be expected at lower
temperature and lower pressures.
1/2 M 1.5 38 Brass Neoprene 0.5 310-700 $6.77
Features:
● Available in 1/4" and 1/2" NPT sizes
● Available in long length 1/2 M 1.5 38 Brass Nordel 0.5 310-710 $6.77
● Brass body material for non-corrosive service
● Pressure limits to 1000 psi depending on application
● Neoprene core (red cap) for temperature range of 1/2 M 3 76 Brass Neoprene 0.5 310-700-XL $11.94
0-200°F, for use with natural gas and petroleum
products
● Nordel core (blue cap) for temperature range of 0- 1/2 M 3 76 Brass Nordel 0.5 310-710XL $11.94
275°F, for use with hot and chilled water systems
● Valve core is self-sealing with pressure cup for
superior sealing protection
● Tested by an independent lab indicates no leaks at high or low pressure
● Cap retaining straps are standard on all brass plugs.
See next page for Accessories

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Accessories For Pressure & Temperature Plugs 310 and 311 Series
Take pressure or temperature readings quickly

Pressure Gauge Probe Adapters
The pressure gauge adapter has a probe constructed of 304 stainless steel. The
probe is 1/8" in diameter and extends 2" (1 1/2" exposed probe) on the 312-500
adapter and 3 1/2" (3" exposed probe) on the 312-500-XL adapter. The 1/8"
diameter probe operates in either the 1/4" or 1/2" Plug. The 312-500-XL Pressure
Gauge Probe Adapter will operate in any of the Plugs.
Pressure Gauge Probe Adapters
Unit
(All connections 1/4" FNPT) Shpg Wt Item
Price
(For 312-800-B Gauge) lbs Number
Each
Adapter with 1/8" x 1 1/2" probe 0.5 312-500 $20.32
Adapter with 1/8" x 3" probe (XL plugs) 0.5 312-500-XL $32.72
Adapter with 1/16" x 1 1/2" probe (311-125-00) 0.5 312-510 $27.60
Adapter (1/8" x 1 1/2" probe - all 316 SS) 0.5 312-520 $51.00
Temperature Gauges
The analog thermometers are constructed of stainless steel, has a 1 3/4" dial and accuracy within 1/2% over the entire scale. Recalibration is by
turning the hex nut on the back of the dial case with stem immersed in a known temperature bath.
Digital thermometers have the same specifications as above but can not be recalibrated in the field.
Pressure Gauges
The 3 1/2" pressure gauge has an ASME B accuracy of 3/2/3% (2% in middle of scale). It has an adjustable red altitude pointer with a psi and feet of
water scale.
Bi-metal Pocket Testing Thermometers, 5" Stem, 0.156" (4 mm)
Shpg Wt Item Unit Price
Style Temperature Range Degree Division lbs Number Each
Analog with Recalibration 40°F to 160°F 2 0.5 312-600 $10.42
Analog with Recalibration 25°F to 125°F 1 0.5 312-601 $10.42
Analog with Recalibration 0°F to 220 °F 2 0.5 312-603 $10.42
Digital, Cannot Recalibrate -58°F to 571°F 0.1 0.5 312-606 $28.42
Compound Pressure Gauges

Range Connection
lbs Number Each
0-100 psi, 0-700 kPa 1/4" mnpt 1 312-800-B $31.56
0-200 psi, 1-1400 kPa 1/4" mnpt 1 312-800-B200 $31.56
0-300 psi, 0-2100 kPa 1/4" mnpt 1 312-800-B300 $31.56
Pressure and Temperature Test Kits

With Protective Carrying Case
lbs Number Each
312-1500 Test Kit contains:
1 ea 312-601 25° to 125°F Thermometer
1 ea 312-603 0° to 220°F Thermometer 2 312-1500 $339.48
1 ea 312-800-B 0-100 psi, 0-700 kPa Pressure Gauge
2 ea 312-500 1/8" x 1 1 /2" Probe Pressure Gauge Adapter
312-1500-XL Test Kit contains:

1 ea 312-601 25° to 125°F Thermometer
1 ea 312-603 0° to 220°F Thermometer 2 312-1500XL $339.48
1 ea 312-800-B 0-100 psi, 0-700 kPa Pressure Gauge
1 ea 312-500-XL 1/8" x 3" Probe Pressure Gauge Adapter

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Flushers, Drain Jet™ Hydraulic Drain Flushers, Pipe Sizes: 1-3/8" to 6", 100-102 Series
PETERSEN® Drain Flushers open clogged drains with powerful jet action
PETERSEN® Drain Flushers open clogged drains with powerful jet action and high flow rate. Easy to install even around bends and elbows. Much
greater flow rate than rubber bulb-type flushers that require much of the pressure just to expand the rubber. Drain Jet™ Hydraulic Drain Flusher
puts all the water flow and pressure to work. The 100 to 102-0 Series have a 3/4" garden hose connection. The 102-3-Series have a NPT
connection for use with your power Jetter and can double as a pipe plug (simply put a pipe plug in the outlet end, inflate up to 100 psi (60 psi for
6"), and use as a pipe plug). Constructed of heavy duty specially treated industrial fabric.
1. Connect Flusher 2. Insert Flusher 3. Turn on water.

to water hose. into drain. Bag expands, locks
Flusher in pipe and
flushes drain clear
Pipe Diameter Shipping

Deflated Length Unit Price
Maximum Minimum Inlet Brand Name Standard 2/10 pk Item Number Each
in mm in mm in mm Pack Ea lbs
Flushers, 102-3 Series, Drain Jet-Pro®

1.5 38 1.375 34 3/8" NPT 8.75 222 Drain Jet-Pro™ 1 1 102-3001 $66.95
2.5 63 1.5 38 3/8" NPT 9.25 235 Drain Jet-Pro™ 1 1 102-3002 $77.95
3 76 2.5 63 3/8" NPT 13 330 Drain Jet-Pro™ 1 2 102-3003 $112.95
4 101 3 76 3/8" NPT 14.75 375 Drain Jet-Pro™ 1 2 102-3004 $126.95
6 152 4 101 3/8" NPT 20.25 514 Drain Jet-Pro™ 1 3 102-3006 $188.95
Flushers, 102-0 Series, Drain Jet™
1.5 38 1.375 34 3/4" Gdn. Hose 8.75 222 Drain Jet™ 2 or 10 1/1 102-001 $44.95
2.5 63 1.5 38 3/4" Gdn. Hose 9.25 235 Drain Jet™ 2 or 10 1/1 102-002 $52.95
3 76 2.5 63 3/4" Gdn. Hose 13 330 Drain Jet™ 2 or 10 2/1 102-003 $77.95
4 101 3 76 3/4" Gdn. Hose 14.75 375 Drain Jet™ 2 or 10 2/1 102-004 $84.95
6 152 4 101 3/4" Gdn. Hose 20.25 514 Drain Jet™ 2 3 102-006 $128.95
Flushers, 100 Series Dr-Fix it® / 101-Series Econo
2 51 1.5 38 3/4" Gdn. Hose 8 203 Econo 2 or 10 1/1 101-002 $49.95
4 101 1.625 41 3/4" Gdn. Hose 9 229 Dr-Fix it® 2 1 100-004 $33.95
6 152 3 76 3/4" Gdn. Hose 13 330 Dr-Fix it® 2 2 100-006 $42.95

Products covered by one or more of the following patents: 4,565,222; 5,353,842; 5,901,752;
6,446,669; 6,568,429; 6,899,138 and other applications pending.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Cleaning Balls, Pipeline, Pipe Sizes: 5.87" to 18.25", 109 Series
Great option for cleaning new lines

Inexpensive method for cleaning new lines prior to line acceptance testing, also for
cleaning grease out of existing lines - the better alternative to an expensive jet truck.
Equipped with eye bolts at each end for tethering and spiral grooves to create high-
power spraying action for cleaning pipelines.
Inflation Shpg Unit

Head Pressure Deflated Deflated Valve Wt Item Price
Nominal Size Range of Use (Feet of Head) Length Diameter Thread Size Eye Bolt lbs Number Each
10.25" 5.62"
6" - 10" 5.87" 5 8"
(260 mm) (142 mm) 1/4" (1) 3/8" (2) 4 109-010 $231.00
(150 - 250 mm) (149 mm) (1.5 M) (203 mm)
10" - 14" 8.75" 14.25" 5 12.25" 8.5"
1/4" (1) 3/8" (2) 10 109-014 $302.00
(250 - 350 mm) (222 mm) (362 mm) (1.5 M) (311 mm) (216 mm)
15" - 18" 11" 18.25" 5 14.75" 10.75"
1/4" (1) 3/8" (2) 16 109-018 $364.00
(375 - 450 mm) (279 mm) (464 mm) (1.5 M) (375 mm) (273 mm)
Manhole Winch Shpg Unit

● Drags plugs in leak location testing Wt Item Price
Description lbs Number Each
● Feeds Pipeline Cleaning Ball down line for Manhole Winch 30 938-7826 $1,960.00
sewer cleaning
● Normal pull strength up to 550 pounds
● 3/32" diameter steel cable

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Flushers, Municipal Style Hydraulic Pipeline Flushers, Pipe Sizes: 3" to 12", 107 Series
Powerful Hydraulic Force and Jet Action Flushes Pipeline Clear Quickly and Efficiently
● Manufactured with heavy industrial treated woven canvas.

● Multi size configuration allows use in smaller than the rated size. Leak back may increase
for smaller size pipes.
● Light Weight Allows one person insertion for most sizes and applications.
● Flexibility allows easy navigation through bends and small openings.
● Under Water Placement is easier due to the small deflated size and minimal internal air
● May be used as a plug with water or air by capping the outlet.
● Generally in stock up to 12" diameter with larger and smaller sizes available in just a few days.
● Custom Configurations available for most size, temperature, chemical, and pressure requirements.
Clear Sand & Debris Clear Obstructed Sewer

1. Insert Flusher above debris with outlet pointed up stream 1. Insert Flusher above debris with outlet pointed down stream
2. Turn on water full force allowing water head build up 2. Turn on water full force allowing water to expand Flusher
3. Turn off water and remove Flusher; the released head of 3. Water flow and pressure builds between Flusher and blockage
water clears pipeline clearing sewer
Pipe Diameter Unit

Maximum* Outlet Shpg Price
Maximum Minimum
Flushing Inlet Connection Deflated Length Wt Item Each
in mm in mm Pressure Coupling in npt in mm lbs Number**
4 102 3 76 100 psig 1 1/2" npsm 1M 17 431 4 107-004-1 $279
4 102 3.5 89 100 psig 2 1/2" nh 1 1/2 M 17 431 7 107-004-3 $338
6 152 4 102 100 psig 1 1/2" npsm 1M 22 558 5 107-006-1 $302
6 152 5 127 100 psig 2 1/2" nh 1 1/2 M 22 558 8 107-006-3 $371
8 203 4 102 100 psig 1 1/2" npsm 1M 25 635 6 107-008-1 $371
8 203 5 127 100 psig 2 1/2" nh 1 1/2 M 25 635 9 107-008-3 $440
10 254 4 102 100 psig 2" npsm 1 1/4 M 37 939 8 107-010-2 $488
10 254 5 127 100 psig 2 1/2" nh 1 1/2 M 37 939 13 107-010-3 $557
12 305 4 102 100 psig 2" npsm 1 1/4 M 42 1067 13 107-012-2 $557
12 305 5 127 100 psig 2 1/2" nh 2M 42 1067 14 107-012-3 $626

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Hot Tappers, Manual, Pipe Sizes: 1/2" to 6", 261 Series
Tap Live, Pressurized Pipelines Without Interruption

Economical tools allows tapping most pipelines with 1/4" to 6" hot taps in water supply
pipelines to 100 psig pressure. The overall shaft length is 18" for sizes up to 2" and 24" for
larger sizes.
Right - Hot tapper shown with

and without 2" adaptor
Shpg Unit Shpg Unit

Wt Item Price Wt Item Price
Description lbs Number Each Spare Parts List - Description lbs Number Each
* Multi-Size Hot Tap Kit, 1/2" to 2" Bi-metal Hole Saws 28 261-0020-K $788 Arbor, 7/16” Hex for hole saws 9/16 - 1-3/16” 0.5 910-8001 $13.45
* Multi-Size Hot Tap Kit, 1/2" to 2" Carbide Hole Saws 28 261-0020-KC $907
Arbor, 7/16” Hex for hole saws 9/16 - 6” 0.5 910-8002 $25.20
* Multi-Size Hot Tap Kit, 1/2" to 6" Bi-metal Hole Saws 70 261-0060-K $2,310
Drill Pilot 1/4" RD, 7/16" & 5/8" Hex,
* Multi-Size Hot Tap Kit, 1/2" to 6" Carbide Hole Saws 70 261-0060-KC $2,657 0.5 910-8003 $39.90
4" Long with Coupon Retainer
Hot Tapper, 1/2" Single Size 4 261-0005 $289 Drill Shaft, 7/16" x 18" 1.5 910-9120 $51.10
Hot Tapper, 3/4" npt x 5/8" Bi-metal Hole Saw 4 261-0007 $308 Drill Shaft, 7/16" x 24" 1.5 910-9124 $54.95
Hot Tapper, 3/4" npt x 5/8" Carbide Hole Saw 4 261-0007-C $355 O-ring, #206, 0.484"ID x 0.139" Viton 75 Duro 0.5 914-0206-1875 $1.00
Hot Tapper, 1" npt x 7/8" Bi-metal Hole Saw 5 261-0010 $327 Packing Gland, 3/4" mnpt x 1/2" ID 0.5 910-8103 $109.85
Hot Tapper, 1" npt x 7/8" Carbide Hole Saw 5 261-0010-C $377
Hot Tapper, 1 1/4"npt x 1 1/8" Bi-metal Hole Saw 5 261-0012 $346
Hot Tapper, 1 1/4"npt x 1 1/8" Carbide Hole Saw 5 261-0012-C $398
Hot Tapper, 1 1/2" npt x 1 3/8" Bi-Metal Hole Saw 5 261-0015 $364
Hot Tapper, 1 1/2" npt x 1 3/8" Carbide Hole Saw 5 261-0015-C $419
Hot Tapper, 2" npt x 1 7/8" Bi-metal Hole Saw 6 261-0020 $382
Hot Tapper, 2" npt x 1 7/8" Carbide Hole Saw 6 261-0020-C $440
Hot Tapper, 2 1/2" npt x 2 3/8" Bi-metal Hole Saw 8 261-0025 $445
Hot Tapper, 3 1/2" npt x 3 3/8" Bi-metal Hole Saw 13 261-0035 $504
Hot Tapper, 6" npt x 5 1/2" Bi-Metal Hole Saw 29 261-0060 $797

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Hot Tappers, Pneumatic, Pipe Sizes: 1/2" to 6", 262 Series
Tap Live, Pressurized Pipelines Without Interruption

The PETERSEN® 262-2040 Pneumatic Hot Tapper is sized for limited space and light weight one man operation. It will tap larger holes than any
manual crank Tapper and air pressure will allow it to tap up to 6” diameter
holes often at least as fast as larger hydraulic machines.
● Light weight for one man operation
● Makes taps ¼” to 6” diameter
● Constant force adjustable for each cutter size and pipe material
● Far more efficient and can tap larger holes than the hand crank tappers
● It can handle many of the tough jobs that previously required a large
hydraulic tapper
● Works with any electric, hydraulic, or pneumatic drill motor with a
standard ½” chuck
Shown Configured for a 6" tap
Tapping Valve Shpg Unit

Adapter Sizes Wt Item Price
Inches mm Description lbs Number Each
Pneumatic Hot Tapping Machine,
1/4" to 6" Capacity 40" overall length 25 262-2040-40 $1,956.00


1 25.4 Adaptor 1" NPT 262-20400010 $25.00

1-1/4 38.1 Adaptor 1-1/4" NPT 262-20400012 $38.00
1-1/2 38.1 Adaptor 1-1/2" NPT 262-20400015 $87.00
2 50.8 Adaptor 2" NPT 262-20400020 $20.00
2-1/2 63.5 Adaptor 2-1/2" NPT 262-20400025 $72.00
3 76.2 Adaptor 3" NPT 262-20400030 $88.00
4 101.6 Adaptor 4" NPT 262-20400040 $187.00
5 127 Adaptor 5" NPT 262-20400050 $466.00
6 152.4 Adaptor 6" NPT 262-20400060 $577.00
3 76.2 Flange Adaptor 3" 150# 262-20401030 $564.00
4 101.5 Flange Adaptor 4" x 150# 262-20401040 $614.00
6 152.4 Flange Adaptor 6" x 150# 262-20401060 $790.00
3 76.2 Flange Adaptor 3" x 300# 262-20403030 $875.00
4 101.4 Flange Adaptor 4" x 300# 262-20403040 $984.00
6 152.4 Flange Adaptor 6" x 300# 262-20403060 $1,098.00
Set Screw 10-32 x .50 910-00190-0504 $1.40
Tap Drill Capscrew Hexhd 931-9003-0008 $26.00
Retaining Ring .50" bore 910-9903-0050 $1.00
Stop Collar Split .50 OD Shaft 910-9901-0050 $14.00
Flat Washer .531x1.06x.095 910-8050-1 $1.00
O-Ring .484x.139 Viton 914-0206-1875 $1.00
O-Ring 1.60x.210 Viton 914-0326-1875 $5.60
O-Ring .859x.139 Viton 914-0212-1875 $1.32
Pilot Drill Bit 1/4" 910-8003 $40.00

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Deflection Gauges, Pipe Sizes: 4" to 27", 938-96 Series
Used to test flexible sewer pipe for out-of-roundness or deflection

Deflection Gauges (mandrels) are used to test flexible sewer pipe for out-of-roundness or deflection per ASTM specifications D3034 and F679.
This testing ensures that flexible pipe has been properly bedded and backfilled (ASTM D2321) to give optimal performance.
Both steel and aluminum gauges utilize a nine arm design to ensure the pipe is tested accurately. This design also allows gravel and debris to
easily pass through. Other gauges can get hung up - causing a deflection test to fail, even though the pipe is within tolerance. Sized to .01" , both
deflection gauge styles meet ASTM requirements.
Average Base 5% Deflection 7.5% Deflection

Nominal Size Pipe Pipe ID Pipe ID* Gauge OD Gauge OD
Deflection Requirements: ASTM Specification D3034 (4" - 15")
4" SDR 35 3.965 3.895 3.7 3.6
6" SDR 26 5.764 5.612 5.33 5.19
6" SDR 35 5.893 5.742 5.46 5.31
8" SDR 26 7.715 7.488 7.11 6.93
8" SDR 35 7.891 7.665 7.28 7.09
10" SDR 26 9.644 9.342 8.87 8.64
10" SDR 35 9.864 9.563 9.08 8.84
12" SDR 26 11.48 11.102 10.55 10.27
12" SDR 35 11.737 11.361 10.79 10.51
15" SDR 26 14.053 13.575 12.9 12.56
15" SDR 35 14.374 13.898 13.2 12.86
Deflection Requirements: ASTM Specification F679 (18" - 27")
18" SDR 26 17.177 16.586 15.76 15.34
18" SDR 35 17.564 16.976 16.13 15.7
21" SDR 26 20.249 19.545 18.57 18.08
21" SDR 35 20.707 20.004 19 18.5
24" SDR 26 22.781 21.964 20.87 20.32
24" SDR 35 23.296 22.48 21.36 20.8
27" SDR 26 25.674 24.744 23.51 22.89
27" SDR 35 26.258 25.327 24.06 23.43
30" SDR 26 29.306 28.763 27.32 26.61
Aluminum Fin Style Deflection Gauge:

● Lightweight, corrosion-resistant
● Field-verifiable without a proving ring
● Assembles without tools
● All sizes fit through standard 24" manhole
● Fins for 4"-15" gauges have skid size equal to the nominal pipe size-gauge will meet
regional codes and will not tip in the line
● Nine-fin design ensures testing accuracy
● Open design allows gravel and debris pass-through
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Deflection Gauges, Pipe Sizes: 4" to 27", 938-96 Series (Continued)
Field Verification:
Fin Style Deflection Gauges are designed to be field verified by inspectors without the
use of a proving ring. Simply place two fins end to end as pictured to the right and
measure the width.
Add one inch to the mandrel and you have the outside dimension of the gauge. Using
this method simplifies the inspector's job of verifying sizes on deflection gauges.
Unit Price
Nominal Size Pipe Deflection Shpg Wt lbs Item Number Each
Aluminum Fin Sets for Below Mandrel
6", 8", 10" SDR 26 5% 18 938-9610-265 $671
6", 8", 10" SDR 35 5% 18 938-9610-355 $671
6", 8", 10" SDR 35 7.50% 18 938-9610-3575 $671
8", 10", 12" SDR 26 5% 19 938-9612-265 $725
8", 10", 12" SDR 35 5% 19 938-9612-355 $725
8", 10", 12" SDR 35 7.50% 19 938-9612-3575 $725
Unit Price
Nominal Size Description Shpg Wt lbs Item Number Each
Mandrels for Above Aluminum Fin Sets
10" Mandrel (4" -15" Fins) 3 938-9610-10 $181
24" Mandrel (18"- 48" Fins) 6 938-9610-24 $267
Unit Price Unit Price

Nominal Size Pipe Shpg Wt lbs 5% Deflection Each 7.5% Deflection Each
Deflection Gauges Including Aluminum Fins
4" SDR 35 2 938-96004-355 $153.00 938-96004-3575 $153.00
6" SDR 26 2 938-96006-265 $161.00 Custom $161.00
6" SDR 35 2 938-96006-355 $161.00 938-96006-3575 $161.00
8" SDR 26 3 938-96008-265 $171.00 Custom $171.00
8" SDR 35 3 938-96008-355 $171.00 938-96008-3575 $171.00
10" SDR 26 3 938-96010-265 $213.00 Custom $213.00
10" SDR 35 3 938-96010-355 $213.00 938-96010-3575 $213.00
12" SDR 26 4 938-96012-265 $269.00 Custom $269.00
12" SDR 35 4 938-96012-355 $269.00 938-96012-3575 $269.00
15" SDR 26 5 938-96015-265 $307.00 Custom $307.00
15" SDR 35 5 938-96015-355 $307.00 938-96015-3575 $307.00
18" SDR 35 8 938-96018-355 $803.00 938-96018-3575 $803.00
21" SDR 35 10 938-96021-355 $882.00 938-96021-3575 $882.00
24" SDR 35 11 938-96024-355 $942.00 938-96024-3575 $942.00
27" SDR 35 12 938-96027-355 $1002.00 938-96027-3575 $1002.00
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Deflection Gauges, Pipe Sizes: 4" to 27", 938-96 Series (Continued)
Fixed Steel Style Deflection Gauges

● Durable, zinc-plated construction resists corrosion
● Conforms to mandrel sizing specifications-blade length is equal to or greater than
the nominal pipe size
● Nine-arm design ensures testing accuracy
● Open design allows gravel and debris pass-through
Unit Price
Nominal Size Pipe Shpg Wt lbs 5% Deflection Unit Price Each 7.5% Deflection Each
Fixed Size Steel Deflection Gauges (Larger and Custom Sizes are Available)
6" SDR 26 5 938-96106-265 $205 938-96106-2675 $205
6" SDR 35 5 938-96106-355 $205 938-96106-3575 $205
8" SDR 26 7 938-96108-265 $267 938-96108-2675 $267
8" SDR 35 7 938-96108-355 $267 938-96108-3575 $267
10" SDR 26 8 938-96110-265 $315 938-96110-2675 $315
10" SDR 35 8 938-96110-355 $315 938-96110-3575 $315
12" SDR 26 9 938-96112-265 $386 938-96112-2675 $386
12" SDR 35 9 938-96112-355 $386 938-96112-3575 $386
15" SDR 26 14 938-96115-265 $459 938-96115-2675 $459
15" SDR 35 14 938-96115-355 $459 938-96115-3575 $459
18" SDR 26 16 938-96118-265 $519 938-96118-2675 $519
18" SDR 35 15 938-96118-355 $519 938-96118-3575 $519
21" SDR 35 18 938-96121-355 $597 N/A Call
24" SDR 35 11 938-96124-355 $676 N/A Call
Larger and custom sizes are available.
Proving Rings
● Used to verify deflection gauge sizes
● Standard sizes: 6"-15" SDR 35 5% deflection and
● 8"-12" SDR 35 7.5% deflection
● Custom sizes for 5"-18" also available
Unit Price
Nominal Size Pipe Deflection Shpg Wt lbs Item Number Each
Proving Rings (Larger and custom sizes are available)
6" SDR 35 5% 1 938-9600-065 $128
8" SDR 35 5% 1 938-9600-085 $133
8" SDR 35 7.50% 1 938-9600-0875 $133
10" SDR 35 5% 1 938-9600-105 $144
10" SDR 35 7.50% 1 938-9600-1075 $144
12" SDR 35 5% 1 938-9600-125 $157
12" SDR 35 7.50% 1 938-9600-1275 $157
15" SDR 35 5% 1 938-9600-155 $169
18" SDR 35 5% 1 938-9600-185 $181
Larger and custom sizes are available.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pumps, Portable, Medium Pressure Hydrostatic Test, 938-93 Series
Designed for pressure testing water lines and sewer force mains
Hydrostatic Test Pumps are designed for pressure testing water lines and sewer force mains as prescribed by AWWA Standard C600 Installation of
Ductile-Iron Water Mains and C605 Installation of PVC Pressure Pipe.
Hydrostatic Test Pumps are designed to be the most user friendly in the industry. Both Diaphragm and Piston Style pumps are available and come
powered by either a Honda or Briggs & Stratton engine.
Hydrostatic Test Pump - Diaphragm Style - High-Volume

35 GPM @ 290 psi
● 11 HP engine with oil alert™
● Hypro® triple diaphragm pump - 35 gpm/290 PSI
● Self priming, handles up to 10% chlorine solutions
● Enclosed gear reduction - excellent heat dissipation
● Heavy duty coupling with protective cover
Unit
Shpg Price
Description Wt lbs Item Number Each
Diaphram-style Test Pump: 35 gpm, 290 psi
250 938-9335H $5,990
Honda engine, 12′ output & 10′ intake hoses
Hydrostatic Test Pump - Diaphragm Style - 9.5 gpm @ 550 psi

● 5.5 HP engine
● Hypro® Twin diaphragm pump - 9.5 gpm / 550 PSI
● Handles up to 10% chlorine solutions
● May be run dry
● Four output pressure settings
● Integral manifolds - eliminates leak points
● Enclosed gear reduction - excellent heat dissipation
● Pulsation dampener - no need to surge tank
Equipped with:
● Heavy-duty frame
● Hydraulic quick-disconnect - brass, swivel fitting
● Inline strainer - easy to clean clear bowl 9.5 Gallon Diaphragm Pump
● Clear hose - flow verification (Shown with optional wheel kit)
● Silicone filled test gauge w/stainless steel case
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pumps, Portable, High Hydrostatic Pressure Test, 938-93 Series (Continued)
Optional Water Tank:

● 16 gallon capacity polyethylene tank
● Allows pump to be pressure fed
● Hinged frame allows easy access to engine
● For use with 9.5 gallon diaphragm style pump
Optional Wheel Kit:
● For use with all models
● Shown with optional wheel kit and water tank
Shpg Unit Price

Description Wt lbs Item Number Each
Hydrostatic Test Pump - Diaphragm Style - 9.5 gpm @ 550 psi
Diaphragm Style Test Pump: 9.5 gpm / 550 psi
217 938-93095-H $3,560.00
Honda engine, 12′ output & 10′ intake hoses
Diaphragm Style Test Pump: 9.5 gpm / 550 psi
232 938-93095 $3,200.00
Briggs & Stratton engine, 12′ output & 10′ intake hoses
16 gallon water tank 28 938-9300-16 $591.00
Wheel Kit 23 938-9300-1 $149.00
12′ Output Hose with Disconnects 6 938-9300-01440 $156.00
Disconnect for Output 2 938-9300-2 $82.50
Gauge 0-300 PSI, 2.5" dial, Test Pressure Gauge with retarded increments to 600 psi 1 938-9300-1060 $64.20
12′ Input Hose 10 938-9300-0144 $186.00
Strainer Nylon Filter 1 938-9300-3 $37.60

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Pumps, Portable, High Hydrostatic Pressure Test, 938-9 Series
A fast, safe, and simple method for hydrostatic testing

These test pumps are a fast, safe, and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis.
Choose from two styles and a variety of pressure ranges.
A-Style Hydrostatic Test Pumps

● Ideal for hydro testing heat exchanger tubes, pipes, and pressure vessels
● Test in the field or in the shop
● Simple air-driven pump
● Output pressures range from 1,000 to 10,000 psi (69 to 690 bar)
● Self lubricating air over water intensifier
● Water supply connection
● Easy to read 4" (100 mm) diameter pressure gauge
● Regulator to control inlet air supply
● High pressure bleed valve and high pressure outlet
● Equipped with 10 ft (3.1 m) high pressure hose with quick couplings
● Mating quick connect couplings for air, water inlet connections, and high pressure outlet
● Lockable aluminum tool box with room for hose, fittings, and plug
B-Style Hydrostatic Test Pumps

● Ideal for all hydrostatic testing
● Slightly larger pump mounted on a hand truck
● Simple air-driven pump
● Built-in filter, regulator, and lubricator on air inlet
● Output pressures range from 1,000 to 10,000 psi (69 to 690 bar)
● Easy to read 4" (100 mm) diameter pressure gauge
● High pressure system bleed valve
● Water suction strainer with crow's foot connector
● Supplied with 15 ft (4.5 m) high pressure hose with swivel
● Heavy duty enclosure with integral wheels and handle for portability
A-Style Hydrostatic Test Pumps
Open Flow *Flow Rate at Shpg Unit

Maximum Outlet Pressure Dimensions Item
Rate 85% Rated Output Wt Price
Number
lbs Each
psi bar gpm gpm (L) in (W) in (H) in
2500 172.3 0.9 0.87 24 9.5 10.5 42 938-9125 $9,015
10000 689.4 0.36 0.19 24 9.5 10.5 42 938-9199 $9,015
B-Style Hydrostatic Test Pumps
Volume @ *MaximumCFM Maximum Air Shpg Unit

Maximum Pressure Dimensions
100 CPM Pressure equired Required Wt
Item
Price
Ratio Number
lbs Each
psi bar gpm cfm psi (L) in (W) in (H) in
1000 68.9 7.5 10:1 56 100 17 24 43 150 938-9210 $14,111
3600 248.2 2.7 36:1 56 100 17 24 43 150 938-9236 $14,535
10000 689.5 1 97:1 56 100 17 24 43 150 938-9299 $17,532

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Manhole Vacuum Testers & Accessories, Pipe Sizes: 20" to 42", 938-7 Series
An efficient way to test manholes!
These manhole vacuum testers provide the most efficient, accurate, and cost-effective method of testing new, existing, and rehabilitated
manholes, per ASTM C 1244.
Vacuum testing identifies infiltration and exfiltration problems by creating a vacuum in a manhole and then monitoring a gauge for vacuum loss.
Less expensive and faster than water testing, the manhole testers' remote-inflation and monitoring system keeps users away from the danger
zone. Can be used in manholes as deep as 40' if desired.
Bladder-Style Head Sealing Range Shpg Unit

Maximum Minimum Wt Item Price
Assemblies in mm in mm Description lbs Number Each
● Seals the inside diameter of the 24.3 617 20 508 24" Bladder Tester 130 938-7124 $2,870
manhole 26.3 668 21.5 546 26" Bladder Tester 145 938-7126 $2,960
at frame or cone 29.3 744 24 609 29" Bladder Tester 160 938-7129 $3,000
30.3 769 25 635 30" Bladder Tester 165 938-7130 $3,010
● Supported by a durable 32.8 833 27.5 698 32" Bladder Tester 170 938-7132 $3,240
aluminum brace 34.3 871 30 762 34" Bladder Tester 175 938-7134 $3,320
36 914 31.5 800 36" Bladder Tester 185 938-7136 $3,390
24" Replacement Bladder 10 938-7124BL $525
Replacement 20’ Hose 25 938-71200HO $525
Replacement 0-30” hg Gauge 6 938-71200G3 $174
Plate-Style Head Sealing Range

Assemblies Maximum Minimum Shpg Unit
● Designed to seal manhole Wt Item Price
in mm in mm Description lbs Number Each
cone surface 30 762 18 457 32" Plate-Style Tester 100 938-7232 $1,680
● Seals a wide range of manhole 36 914 18 457 38" Plate-Style Tester 120 938-7238 $1,720
diameters 42 1066 18 457 44" Plate-Style Tester 140 938-7244 $1,810
● Hose (20 ft.) and gauge 32" Replacement Foam 12 938-7232FM $295
assembly included 38" Replacement Foam 15 938-7238FM $307
44" Replacement Foam 25 938-7244FM $329
● Neoprene gasket for leak-free
Replacement 20’ Hose 25 938-71200HO $525
seal
Vacuum Pumps
Shpg Unit
● Choose a Honda or Briggs & Stratton engine - Wt Item Price
each with low-oil shut-off to prevent engine Description lbs Number Each
failure Vacuum Pump with Briggs Engine 178 938-7088 $3,390
Vacuum Pump with Briggs Engine 179 938-7168 $2,930
● Heavy-duty frame with optional wheel kit Wheel Kit Option 23 938-7918 $149
● Unbreakable aluminum filter jars
● Oil-free graphite vane pump for no-fuss
lubrication
● Draws 10" HG vacuum in about two minutes
for a 15' deep manhole
Continued Next Page

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Manhole Vacuum Testers & Accessories, Pipe Sizes: 20" to 42", 938-7 Series (Continued)
Venturi Vacuum Generators

● Converts standard air compressor into a vacuum source for testing
manholes - draws a vacuum in minutes
● Vacuum generator 460 delivers 14 CFM at 10" HG (air compressor:
minimum 7 CFM at 100 psi)
● Vacuum generator 600 delivers 42 CFM at 10" HG, meeting or exceeding
the competition (air compressor: minimum 85 CFM at 100 PSI)
● Chicago/Crows Foot air compressor fitting and Cam and Groove Adapter F Style
vacuum fitting
Manhole Jack (Hose Guide)

● Guides air hoses and cables at pipe invert in manhole
● Zinc-plated for corrosion resistance
● Fits pipe sizes 5" - 24"
● Includes eye bolt for securing rope and ease of retrieval
Manhole Roller (Hose Guide)

● Guides air hoses and cables at pipe invert in manhole
● Adjustable push-in system
● Installs at surface - no need to enter the manhole
Manhole Winch
● Drags plugs in leak location testing
● Feeds Pipeline Cleaning Ball down line for sewer cleaning
● Normal pull strength up to 550 pounds
● 3/32" diameter steel cable
Manhole Cover Hooks

● Forged hexagonal steel for extra strength
● Available with flat or 90 degree handles
Shpg Wt Item Price
Description Lbs Number Each
Venturi Vacuum Generator 460 5 938-7460 $494.00
Venturi Vacuum Generator 600 11 938-7600 $857.00
Manhole Jack (Hose Guide) 27 938-7824 $659.00
Manhole Roller (Hose Guide) 30 938-7825 $765.00
Manhole Winch 65 938-7826 $1960.00
24" Manhole Cover Hook with 90° handle 4 938-7800-2490 $52.20
36" Manhole Cover Hook with 90° handle 5 938-7800-3690 $55.80
24" Manhole Cover Hook with flat handle 4 938-7800-24 $34.00
36" Manhole Cover Hook with flat handle 5 938-7800-36 $43.70
Hose (20 ft) and Gauge Assembly (replacement part) 22 938-7820 $404.00
Gauge, 0-30" Hg, 3" Dial (replacement part) 2 938-7823 $134.00
Gauge, 0-60 psi, 2" Dial (replacement part) 1 938-7822 $40.10

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Smoke Testers, 938-95 Series
Effectively identifies inflow

Smoke Blower Features:
● Effectively identifies inflow
● For use with traditional smoke bombs or liquid smoke
● Briggs & Stratton engine
● Generates up to 3,769 cubic feet per minute of air flow*
● Made of lightweight, cast aluminum
Equipped with:
● ½" foam cell gasket to ensure a leak-free seal on manholes and minimize vibration
● Smoke bomb box holder (traditional smoke blower only)
● Pressurized tank, hose and all necessary components (liquid smoke blower only)
Smoke Bomb Features:

● Produces a thick, dense smoke
● Time-proven
● Simple to use
● Can be used with most smoke blowers
● 3 minute bombs available with double wick that allows
units to be strung together for a longer smoke time
Smoke Fluid Features:

● Produces thick, dense smoke
● Easy-to-regulate
● Virtually indefinite storage life
Shpg Unit Price

Description Wt lbs Item Number Each or Case
Smoke Bomb
Smoke Bomb Smoke Blower Kit: Briggs & Stratton engine 170 938-9510 $1,720.00
Smoke Bomb: 30 seconds (sold 12 per case) 2 938-9500-0030 $60.31
Smoke Bomb: 60-seconds (sold 12 per case) 2 938-9500-0060 $68.26
Smoke Bomb: 3 minutes (sold 12 per case) 5 938-9500-0180 $121.90
Smoke Bomb: 3 minutes, double wick (sold 12 per case) 5 938-9500-2180 $125.00
Smoke Fluid
Smoke Fluid Smoke Blower Kit: Briggs & Stratton engine 178 938-9520 $1,840.00
Fluid Smoke pressure container and hose: 2 gallons capacity 7 938-9520-02 $93.40
Fluid Smoke: one gallon 8 938-9520-001 $62.40
Fluid Smoke: five gallons (sold 1 per case) 40 938-9520-005 $236.00
Fluid Smoke: fifty-five gallon drum 406 938-9520-055 $1,810.00
Accessories
Smoke Blower replacement fan (left pitch) 3 938-9500-01 $181.00
Smoke bomb holding cage 2 938-9500-02 $81.30
Fluid Smoke conversion kit from Smoke Bomb Briggs & Stratton engine 10 938-9500-1020 $410.00
Includes Smoke fluid pressure container and hose,
Modified muffler with injection port
*CFM performance based on independent laboratory tests. When tested side-by-side at an independent air flow
laboratory, Cherne's line stringer, ventilator, and smoke blower beat the competition at every flow condition

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Stringers and Ventilators, 938-94 Series
For use as a line stringer, ventilator and smoke blower

Fan Assembly Features:
● For use as a line stringer, ventilator and smoke blower
● Made of lightweight, cast aluminum
● Foam base minimizes vibration
● 30" Diameter base plate
Equipped with:
● 5HP Honda or Briggs & Stratton engine
● Top-mounted handles for easy maneuverability
Line Stringer Usage Details:
● Will string a 300' section of sewer line in under a minute without plugging the line
● Line stringer vacuum pulls a lightweight nylon parachute through wet or dry lines
Ventilator Usage Details:
● Supports OSHA guidelines for confined space entry
● Provides up to 2,350 CFM as a blow-in ventilator and up to 3,470 CFM as a suction
ventilator
● Out-performs similar competitive models by 40% at 3" of static pressure
Shpg Item
Description Wt lbs Number Unit Price Each
Line Stringer Kit: Honda engine
94 938-9410-0610-H $2,580.00
1000' nylon rope and reel, 6-10" parachute
Line Stringer Kit: Briggs & Stratton engine
112 938-9410-0610 $2,080.00
1000' nylon rope and reel, 6-10" parachute
Ventilator Kit: Honda engine
143 938-9420-H $2,800.00
Shroud, Stand and 20ft of 8" diameter duct hose
Ventilator Kit: Briggs & Stratton engine
132 938-9420 $2,330.00
Shroud, Stand and 20ft of 8" diameter duct hose
Fan Assembly: Honda engine 84 938-9416-H $2,170.00
Fan Assembly: Briggs & Stratton engine 92 938-9416 $1,690.00
Replacement fan: Line Stringer/Ventilator (right pitch) 4 938-9417 $181.00
1000' Nylon Rope and reel 11 938-9400-1000 $386.00
4" Parachute 1 938-9400-0104 $67.90
6"-10" Parachute 1 938-9400-0610 $82.50
8"-12" Parachute 1 938-9400-0812 $85.00
10"-18" Parachute 1 938-9400-1018 $93.40
18"-36" Parachute 2 938-9400-1836 $151.00
Line Stringer to Ventilator Conversion Kit:
45 938-9415 $785.00
Shroud, Stand and 20 ft of 8" diameter duct hose
* - CFM performance based on independent laboratory tests. When tested side-by-side at an independent air flow
laboratory, Cherne's line stringer, ventilator, and smoke blower beat the competition at every flow condition.

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Safety Gag, Mechanical Plugs, Pipe Sizes: 0.75" to 24", 936-5 Series
For use with mechanical test plugs
These Safety Gags clamp to the outside diameter of standard pipe sizes for use with mechanical test plugs. They are
made with painted carbon steel with plated chain.
Installation Procedure:
Warning: These are general instructions only. Please refer to the appropriate operating procedures for the test plug
being utilized. The 147 Series Test Plugs are designed to be self-sealing and self-gripping, which facilitate both the seal
and the gripper to become tighter as pressure increases. The extra squeeze of the seal and gripper caused by the test
pressure can be detected as minor movement of the shaft. Installing the Safety Gag with a tight chain may limit or
prevent the small movement of the test plug shaft as pressure is increasing, and subsequently limit or prevent the self-
sealing and self-gripping feature of our test plugs. The amount of slack in the chain as well as the position of the installed
plug should be observed from a safe distance to insure no appreciable movement of the plug has occurred. Should
movement be noted, the test should be stopped and all pressure released immediately.
1. Install Safety Gag pipe clamp onto pipe being tested. Safety gags are to be installed with some slack so that
movement of the shaft is not prohibited as pressure increases during testing.
2. Tighten bolts to insure slippage will not occur.
3. Insert test plug into tube or pipe. Follow appropriate operating procedures for the plugs being utilized, and
install plugs per recommended torque values using a calibrated torque wrench.
4. Prior to pressurizing the system, slip the link over the shaft end. Safety gags 8" and larger are equipped with two
chain and link assemblies. The links are stamped with the shaft sizes they can accommodate. Each link can do at
least two sizes of shafts. Insure you have the appropriate link set-up before using. Unscrew the chain connector
and switch the link around if necessary.
5. Continue with appropriate operating procedures.
Safety Gags
Nominal Pipe Size Shpg Unit
Item
Wt Price
in mm Number
lbs Each
0.75 19 2 936-5000-0075 $107
1 25 2 936-5000-0100 $107
1.25 31 2 936-5000-0125 $110
1.5 38 3 936-5000-0150 $110
2 50 4 936-5000-0200 $110
2.5 63 4 936-5000-0250 $117
3 76 4 936-5000-0300 $117
3.5 88 4 936-5000-0350 $138
4 101 4 936-5000-0400 $161
5 127 5 936-5000-0500 $215 Note: The gags are not pressure rated, they are used primarily
6 152 6 936-5000-0600 $215 to prevent losing the plug down the pipe. They may help
8 203 11 936-5000-0800 $285 prevent the plug from becoming a projectile but we make
10 254 15 936-5000-1000 $386
rated plug restraints for most pipelines and pressures. Please
12 304 20 936-5000-1200 $404
14 356 30 936-5000-1400 $4,446 provide the pipe specifications and pressure that the plug will
16 407 40 936-5000-1600 $474 restrain and we will quote accordingly.
18 457 42 936-5000-1800 $519
20 508 45 936-5000-2000 $563
24 610 50 936-5000-2400 $1,764
Standard materials: painted carbon steel with plated chain

Other sizes available, call for pricing

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Product & Service Warranty, Terms & Conditions
Petersen Products Co. (“Petersen”)
GENERAL: This writing contains the entire agreement of the parties and consists of the terms specified on the face hereof, these terms and conditions
and any specifications, drawings or other documentation referenced in these terms and conditions (collectively, "Terms and Conditions"). The Terms
and Conditions shall be the only terms and conditions becoming part of this contract. In the event that Purchaser's purchase order contains provisions
which are inconsistent with or in addition to these Terms and Conditions, such provisions are hereby objected to and shall not become part of the
contract. If the document containing these Terms and Conditions constitutes an acceptance under Article 2 of the Uniform Commercial Code,
acceptance is hereby expressly made conditional on the Purchaser's assent to these Terms and Conditions and that no other terms and conditions,
whether inconsistent or in addition to these terms and conditions, shall become part of the contract. No orders or contracts shall be binding upon
Petersen until accepted by it at its home office in Fredonia, Wisconsin. Orders accepted by Petersen may not be canceled by Purchaser except upon
terms and conditions acceptable to Petersen.
SALE BY MODEL: At its option, Petersen may deliver to Purchaser a model of the goods covered by Purchaser's purchase order and Purchaser will
have the opportunity to examine and test the model. When Petersen provides Purchaser with such a model, Purchaser agrees that goods which
conform to the model shall for all purposes be regarded as conforming goods and as being in accordance with the requirements of the contract.
PURCHASER'S TEST OF GOODS: Purchaser has the responsibility to conduct the research necessary to learn the hazards involved in using the
goods. Purchaser expressly represents and warrants to Petersen that it will properly test the goods in a manner sufficient to conform to applicable law
with respect to the goods in their intended market and to practical considerations with respect to intended and expected uses of the goods.
LIMITED WARRANTY: Our reputation is firmly established as a reliable manufacturer of high quality products. Our goal is to provide products that best
meet Purchaser requirements. Petersen warrants that, at time of shipment, a product is free from all defects in material and workmanship. If any product
has a manufacturing defect or does not perform as stated, we will replace it, repair it or allow it to be returned for credit if notified within 90 days of the
date of shipment thereof. This warranty is void if product is not used in accordance with supplied instructions.
LIMITATION OF PETERSEN'S WARRANTIES AND DAMAGES: PETERSEN MAKES NO WARRANTY, EXPRESS OR IMPLIED, RESPECTING ANY
OF THE PURCHASED GOODS, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR FREEDOM FROM CLAIMS FOR INFRINGEMENT. IN NO EVENT SHALL PETERSEN BE LIABLE FOR LOST PROFITS
OR ANY OTHER INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING ECONOMIC LOSSES. ANY SUGGESTIONS,
TECHNICAL ASSISTANCE, OR OTHER INFORMATION PROVIDED BY PETERSEN OR ITS PERSONNEL REGARDING USE, SELECTION,
APPLICATION OR SUITABILITY OF THE GOODS SHALL NOT BE CONSTRUED AS SUCH A WARRANTY.
PURCHASER'S INDEMNITY: Purchaser agrees to indemnify and hold Petersen, its employees, officers, directors, agents, successors, and assigns,
from and against any and all losses, claims, demands, liabilities, costs and expenses (including reasonable attorneys' fees and other costs of litigation)
that Petersen or any of such persons may sustain or incur whether based upon negligence, breach of express or implied warranty, strict liability in tort,
contract or any other theory of law (a "claim" or "claims") brought by Purchaser, its employees, officers, directors, agents, successors, and assigns, by
an end user of the goods or by any other person or entity arising out of the goods or their sale or use. Purchaser shall notify Petersen of any such claim
or facts of which it becomes aware which could become the basis of a claim, and shall make available all statements, reports and tests made by
Purchaser or for Purchaser or made available to Purchaser. Purchaser will undertake the defense of each such claim. Petersen may participate in the
defense of any such claim to the extent it deems advisable.
PRICE: Any written quotation shall automatically expire unless accepted by a customer within 90 days from the date quoted. Any quotation is subject to
change with or without notice within said 90-day period prior to acceptance to the written order by Petersen. Verbal quotations by Petersen shall expire
within 24 hours. All prices are subject to change without notice. Prices are in U.S. Dollars exclusive of State and Federal taxes, which shall be the sole
responsibility of Purchaser. The Purchaser will reimburse Petersen the amount of any and all taxes required to be paid or shall provide Petersen at the
time of the order a tax exemption certificate or other document acceptable to taxing authorities to establish exemption. Terms are Net 30 days of
Petersen's invoice. Past due accounts will be assessed a service charge (18% APR) on unpaid balance until paid. If the customer defaults in any
payment when due, then the entire price shall become due immediately and payable upon demand or Petersen may at its option without prejudice to
other lawful remedies defer delivery or cancel the order.
FORCE MAJEURE: Petersen shall not be liable for any breach of its obligations hereunder or otherwise with respect to Petersen's products if such
breach was caused, either in whole or in part, by any factor outside of Petersen's control, including, without limitation, stock-outs; fire or other casualty;
strikes or other labor disturbances; failure of any sources of supply (including, without limitation, transportation and utilities); war, terrorism, insurrection,
riot or other violent disturbances; and governmental actions (including, without limitation, embargoes and new laws and regulations). Petersen reserves
the right to allocate its available products in such a manner as it deems appropriate in the event of any shortage thereof so caused.
INTELLECTUAL PROPERTY: Petersen shall retain all rights in all intellectual property, including any rights under any patents as well as any
unpatented information, such as trade secrets, confidential information, trademarks, trade dress or copyrights possessed by Petersen which may
protected by state, federal and/or common law, and nothing in these Terms and Conditions shall be deemed or construed to be a transfer or license of
any of Petersen's intellectual property. Purchaser shall obtain rights to such intellectual property only to the extend that Petersen may grant such rights
(whether by license or otherwise) in writing.
Products covered by one or more of the following patents: 4,565,222; 5,353,842; 5,901,752; 6,446,669; 6,568,429; 6,899,138; 6,959,734; 7,455,077; 7,588,053 and
other applications pending.

Tel 800-926-1926 / 262-692-2416 • Fax 800-669-1434 / 262-692-2418
Alphabetical Index
Annular Seals, Inflatable MULTI-FLEX®, 111-Series 15
Bladders, Custom Inflatable 16
Cleaning Balls, Pipeline, Pipe Sizes: 5.87" to 18.25", 109 Series 88
Completion Plugs, 150-Series 13
Deflection Gauges, Pipe Sizes: 4" to 27", 938-96 Series 92
Duct Balloons and Seals, Custom Inflatable 17
Flushers, Drain Jet™ Hydraulic Drain Flushers, Pipe Sizes: 1-3/8" to 6", 100-102 Series 87
Flushers, Municipal Style Hydraulic Pipeline Flushers, Pipe Sizes: 3" to 12", 107 Series 89
Hot Tap Sleeves, 910-4 Series 14
Hot Tappers, Manual, Pipe Sizes: 1/2" to 6", 261 Series 90
Hot Tappers, Pneumatic, Pipe Sizes: 1/2" to 6", 262 Series 91
Inflatable Line Stop™ Block And Bleed Plugs, High Pressure, Pipe Sizes: 12" and Larger, 129BB Series 8
Continued
Continued
Continued
Inflatable Line Stop™ Plug Insertion Systems, Pipe Sizes: 2” and Larger, 939 Series 12
Lift Bags, Inflatable High Pressure Flat Form, Accessories, 161-0 Series 82
Lift Bags, Inflatable High Pressure Flat Form, Sizes: 22" to 36", 161-0 Series 81
Lift Cylinders, Inflatable MULTI-FLEX®, Sizes: 1" and Larger, 161-9 Series 83
Manhole Vacuum Testers & Accessories, Pipe Sizes: 20" to 42", 938-7 Series 98
Manhole Vacuum Testers & Accessories, Pipe Sizes: 20" to 42", 938-7 Series (Continued) 99
Packer Carriers, Inflatable MULTI-FLEX®, Pipe Sizes: 3 1/2" and Larger, 118 / 119 Series (Continued) 42
Packer Carriers, Inflatable Point Repair, Pipe Sizes: 4" to 12", 130-5 Series 44
Packer Carriers, Inflatable Tee Type Lateral Joint MULTI-FLEX®, Pipe Sizes: 4" to 24", 116 Series 43
Packer Carriers, Inflatable, MULTI-FLEX®, Pipe Sizes: 3 1/2" and Larger, 118 / 119 Series 41

Tel 800-926-1926 / 262-692-2416 • Fax 800-669-1434 / 262-692-2418
Accessories For Pipe Plugs and Packers 55
Annular Seals 17
Block And Bleed Plugs, Inflatable, MULTI-FLEX®, Sizes: 12" - Up High Pressure, 129BB Series 9
Bolt Type Medium Pressure Test Plugs With By-Pass 146-9 Series (Continued) 83
Completion Plug 150-Series 15
Custom Bladders and Inflatable Line Stop™ Products 20
Custom Inflatable Line Stop™ Duct Balloons 21
Deflection Gauges Sizes: 4" to 27" 938-96 Series 107
Deflection Gauges Sizes: 4" to 27" 938-96 Series (Continued) 108
Deflection Gauges Sizes: 4" to 27" 938-96 Series (Continued) 109
Drain & Sewer Cleaning 99
High Dilation Inflatable Line Stop™ Plugs 131 Series 30
High Lift Flange Weld Test Plugs Sizes: 3/4" to 24" 151 Series (Continued) 86
High Pressure Flat Form Bag Accessories 161-0 Series 93
High Pressure Portable Hydrostatic Test Pumps 938-9 Series 111
Hot Tap Sleeves 910-4 Series 16
Hot Tappers Sizes: 1/2" to 6" 261 Series 104
Hot Tappers Sizes: 1/2" to 6" 262 Series 105
Hot Tapping Tools 103
Hydrostatic Test Pumps 938-93 Series 110
Hydrostatic Test Pumps 938-93 Series (Continued) 112
Inflatable Line Stop™ 145 or 116 PSI High Pressure HD Duty Bags and Accessories 90
Inflatable Line Stop™ 145 or 116 PSI High Pressure HD Duty Bags and Accessories 90
Inflatable Line Stop™ Drain Jet™ Hydraulic Drain Flushers Sizes: 1-3/8" to 6" 100-102 Series 100
Inflatable Line Stop™ High Pressure Flat Form Bags Sizes: 22" to 36" 161-0 Series 92
Inflatable Line Stop™ Lifting Cylinders,MULTI-FLEX® 161-9 Series 94
Inflatable Line Stop™ MULTI-FLEX® Lateral Joint "T" Packers Sizes: 4" to 24" 116 Series 50
Inflatable Line Stop™ MULTI-FLEX® Point Repair Packers / Carriers 49
Inflatable Line Stop™ Municipal Style Hydraulic Pipeline Flushers Sizes: 3" to 12" 107 Series 102
Inflatable Line Stop™ Municipal Style Kevlar® Reinforced Pillow Shape Sealing 47
Inflatable Line Stop™ Pipeline Cleaning Balls Sizes: 5.87" to 18.25" 109 Series 101
Large Flow-Through Bypass Plugs Sizes: 5.70" to 24.98" 130-6 Series 34
Large Flow-Through Bypass Plugs Sizes: 5.70" to 24.98" 130-6 Series (Continued) 35
Leak Detector Plugs Sizes: 5.5" to 96" 130-4 Series 32
Leak Detector Plugs Sizes: 5.5" to 96" 130-4 Series (Continued) 33
Leak Detector Pressure Testing (Continued) 57
Leak Detector Pressure Testing (Continued) 58
Leak Detector Pressure Testing 924-1304 Series 56
Lift Bags and Cylinders 89
Line Stop Pipe Plug, Inflatable, High Pressure MULTI-FLEX®, 2" and Larger, 128 Series 10
Line Stop Pipe Plug, Inflatable, High Pressure MULTI-FLEX®, 2" and Larger, 129 Series 4
Line Stop Pipe Plug, Inflatable, High Pressure MULTI-FLEX®, Continued 5

Tel 800-926-1926 / 262-692-2416 • Fax 800-669-1434 / 262-692-2418
Line Stop Plug Insertion Systems 13
Long Test-Ball 2” to 6” 130-3 Series 29
Low Pressure Gas Plugs Sizes: 1" to 48" 154 Series 42
Low Pressure Gas Plugs Sizes: 1" to 48" 154 Series (Continued) 41
Manhole Vacuum Testers & Accessories Sizes: 20" to 42" 938-7 Series 113
Manhole Vacuum Testers & Accessories Sizes: 20" to 42" 938-7 Series (Continued) 114
Mechanical Bolt Type High Pressure Test Plugs Sizes: .53" to 24" 147 Series 84
Mechanical Bolt Type Medium Pressure Test Plugs w/By-Pass Sizes .28" to 10.5" 146-9 Series 82
Mechanical Clean-Out and Hub-Fit Gripper® Plugs Sizes: 2.2" to 4.8" 143-8 Series 75
Mechanical EZ-Swet Line Stopper Plugs Sizes: 1/2" to 4" 148-0 Series 80
Mechanical Flush Mounted and Beveled Finishing Plate 69
Mechanical Hand Tightening Aluminum Body Test Plugs 79
Mechanical Hand Tightening Low Pressure Aluminum Body 67
Mechanical Hand Tightening Low Pressure Nylon Plugs Sizes: 1/2" to 6" 144-0 Series 68
Mechanical Hand Tightening Nylon Test & Cleanout Plugs Sizes: 1 1/2" to 4" 143-0 Series 65
Mechanical Hand Tightening Nylon Test Plugs Sizes: 3 3/4" to 19" 142-0 Series 66
Mechanical High Impact ABS Wing Nut Plugs Sizes: 1.5" to 4" 144-1 Series 77
Mechanical High Lift Flange Weld Test Plugs Sizes: 3/4" to 24" 151 Series 85
Mechanical High Pressure Test Plugs Sizes: 2.469" to 144" 145-9 Series 81
Mechanical Lever Type Expandable Rubber Plugs Sizes: 3/8" to 4" 143-1 Series 71
Mechanical Monitor Well Plugs Sizes: 1" to 8" 140-4 & 140-5 Series 70
Mechanical Pete's Plug II Sizes: 1/8" to 1/2" 311 Series 96
Mechanical Plug Safety Gags Sizes 0.75" to 24" 936-5 Series 117
Mechanical Pressure & Temperature Plugs Sizes: 1/4" to 1/2" 310-Series 97
Mechanical Push & Pull Plugs 140-0 Series (Continued) 63
Mechanical Push & Pull Plugs, Spigot End & Bell End Sizes: 6" to 60" 140-0 Series 62
Mechanical Reinforced ABS Wing Nut Plugs Sizes: 1.5" to 8" 143-9 Series 76
Mechanical Remote Placement Expander Plugs Sizes: 0.57" to 2" 148-3 Series 78
Mechanical Tapered Redwood Pipe Plugs 140-1 Series M 87
Mechanical T-Handle Aluminum Test Plugs With & 74
Mechanical T-Handle Expandable Rubber Plugs Sizes: 1/2" to 5" 143-2 Series 72
Mechanical Wing Nut, End of Pipe & Water Line Stub Plugs Sizes: .39" to 6" 143-3 Series 73
MULTI-FLEX® Annular Seals 111-Series 18
MULTI-FLEX® Point Repair Packers 118 / 119 Series (Continued) 51
Municipal Style Kevlar® Reinforced Rubber Plugs With By-Pass 136-0 (Continued) 40
Municipal Style Kevlar® Reinforced Rubber Plugs With By-Pass Sizes: 3" to 72" 136-0 Series 39
Municipal Style Kevlar® Reinforced Rubber Test Plugs w/o By-Pass Sizes: 1.60" to 72" 134-0 31
Municipal Style Muni-Ball® Plugs Sizes: 1.5" to 96" 130-2 Series 36
Municipal Style Muni-Ball® Plugs Sizes: 1.5" to 96" 130-2 Series (Continued ) 37
Municipal Style Muni-Ball® Plugs Sizes: 1.5" to 96" 130-2 Series (Continued) 38
Other Inflatable Line Stop™ Items 19
Packers Carriers For Point Repair 48
PETERSEN® Hot Tap Pipe Plug Insertion Systems Sizes: 2” to 96” 939 Series 14
Pillow Plugs and Pillow-Style Muni-Balls Sizes 15” to 66” 130-9 Series 45
Pillow Plugs and Pillow-Style Muni-Balls Sizes 15” to 66” 130-9 Series (Continued) 46

Tel 800-926-1926 / 262-692-2416 • Fax 800-669-1434 / 262-692-2418
Pipe Plug Accessories 53
Pipe Plug Inflatable, High Expansion, MULTI-FLEX®, 1" and Larger, 113 Series 2
Pipe Plug, Inflatable, Oil Resistant, HD, MULTI-FLEX®, 1 3/4" up, w/o By-Pass, 124 Series 3
Pipe Plug, Inflatable, Oil Resistant, HD, MULTI-FLEX®, 4" up, with By-Pass, 125 Series 8
Pipe Plug, Inflatable, Oil Resistant, MULTI-FLEX® 1.7" - Up, W/O Bypass, 114 Series 11
Pipe Plug, Inflatable, Oil Resistant, MULTI-FLEX® 2.5" - up, with Bypass, 115 Series 12
Pipe Plugs and Packers Accessories 60
Pipe Plugs, Inflatable Line Stop™ MULTI-FLEX® 1
Pipe Plugs, Mechanical 61
Pipe Plugs, Pillow Style Inflatable 44
Pipe Test Plugs Inflatable, Rubber Molded 22
Pipeline Joint Testers Sizes: 24" to 120" 145-8 Series 88
Plumber Style Rubber Test Plugs Sizes: 0.75" to 18.25" 130-0 Series 24
Plumber Style Rubber Test Plugs Sizes: 0.75" to 18.25"130-0 Series (Continued) 25
Plumber Style Rubber Test Plugs With & Without By-Pass Sizes: 0.8" To 12", 137 Series 23
Point Repair Carriers Sizes: 4" to 12" 130-5 Series 52
Product & Service Warranty, Terms & Conditions 103
Protective Sleeves for Molded Rubber Plugs 936-0 Series 59
Remo®Remote Placement Plug 6” to 18” 130-7 Series 27
Rigid Core Inflatable Line Stop™ By-Pass Plugs, MULTI-FLEX® Sizes: 1 3/4" To 12" 126 Series 26
Rupture Disc 924-13 Series 54
Smoke Testers 938-95 Series 115
Stack Test Style Rubber Test Plugs Sizes: 1.5" to 6" 130-1 Series 43
Stringers and Ventilators 938-94 Series 116
Temperature & Pressure Monitoring Plugs 95
Test Caps Sizes: 1.5" to 6" 142-9 Series 64
Test Equipment 106
Two-Stage Long Kevlar® Reinforced Molded Rubber Plugs Sizes: 1.75" to 6" 138 Series 28

Tel 800-926-1926 / 262-692-2416 • Fax 262-692-2418
Revised
Revised
April
April
30,272019
2018

Petersenplgpckrcats PDF

Uploaded by

Copyright:

Available Formats

Petersenplgpckrcats PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Petersenplgpckrcats PDF

Uploaded by

Copyright:

Available Formats

What types of pipe plugs are described in the document?

What types of pipe plugs are described in the document?

What features or characteristics are used to categorize the different pipe plugs?

What features or characteristics are used to categorize the different pipe plugs?

Cover

Smallest deflated size to install through tiny openings

Pipe Diameter Maximum **Pipeline Inflation Tap Hole Length to Neck

Petersen Products Company

Compact Diameter. Inflates Up To 8 Times For Easy Insertion

Pipe Diameter Maximum **Pipeline Inflation Deflated Shpg Unit

Custom configurations also available *QC Quick connection

Petersen Products Company

Hot Tap Insertion, Flange Inflation, Higher Pressure

Other sizes and custom configurations also available

Centered on End Centered on Diameter

Pipeline Max Inflation Port Length

Petersen Products Company

5.75" 160 psi (11.03 1" Inflation Centered on

Petersen Products Company

11.75" 80 psi (5.51 112" 157 Lb (71.21

Petersen Products Company

Petersen Products Company

Compact Diameter. Inflates Up To 8 Times For Easy Insertion

Custom configurations also available *QC Quick connection

Petersen Products Company

Plug Diameter Maximum **Pipeline Inflated Seal Shpg Unit

Petersen Products Company

Plug pressurized pipelines with MULTI-FLEX® Plugs

● Easy hot tap (live) insertion

Plug Diameter Maximum **Pipeline Deflated

* Requires Rotating Elbow

Petersen Products Company

Compact Diameter. Inflates Up To 8 Times For Easy Insertion

For Integral anchoring harness: Add 25% to price - Suffix "H"

Petersen Products Company

Compact Diameter. Inflates Up To 8 Times For Easy Insertion

Pipe Diameter By-Pass Maximum **Pipeline Inflation Deflated Shpg Unit

Petersen Products Company

View our Hot Tap Plugging Slide

For 128-Series MULTI-FLEX® Plugs For 129-Series MULTI-FLEX® Plugs

Petersen Products Company

Completion Plug allows for removal of Hot Tap Valve

Call for configuration and pricing for your requirements

Products covered by one or more of the following patents:

Petersen Products Company

For Hot Tap Pipe Plug Insertion Systems

Nominal Size Pipe x Shpg Unit

*Size-on-Size Taps require a 1/2" undersize shell cutter.

Petersen Products Company

For almost any size, pressure, chemical, and temperature requirements

Seal ID Seal OD Seal Length Max. Inflation Item Price

Other sizes available on request.

Petersen Products Company

For most temperature and chemical requirements

Products covered by one or more of the following patents: 4,565,222;

Petersen Products Company

For almost any requirement

Products covered by one or more of the following patents: 4,565,222;

Petersen Products Company