New 12345676543

N_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>
ether bc:30:5b:f2:b1:6c
inet6 fe80::be30:5bff:fef2:b16c%eth0 prefixlen 64 scopeid 0x3
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6
,VLAN_HWTSO>
ether bc:30:5b:f2:b1:6d
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
Starting devd.
Starting Network: ix1.
ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO
6,LRO,VLAN_HWTSO>
ether bc:30:5b:f2:b1:6a
status: no carrier
net.inet6.ip6.use_defaultzone: 0 -> 1
Starting Network: igb1.
igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6
,VLAN_HWTSO>
ether bc:30:5b:f2:b1:6d
status: no carrier
Starting Network: ue0.
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 90:b1:1c:2e:86:aa
inet 169.254.0.2 netmask 0xfffffffc broadcast 169.254.0.3
inet6 fe80::92b1:1cff:fe2e:86aa%ue0 prefixlen 64 tentative scopeid 0x6
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
Generating host.conf.
Starting rtsold.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log filesnewsyslog: pid file doesn't exist:
/var/run/syslog.pid
.
ELF ldconfig path: /lib /usr/lib /usr/local/lib
32-bit compatibility ldconfig path:
Starting rsyslogd.
No core dumps found.
Mounting late file systems:.
Configuring syscons: blanktime.
Starting cron.
Setting hostuuid: 00000000-0000-0000-0000-000000000000.
Setting hostid: 0x9f89c84a.
Mon Jun 24 11:29:21 UTC 2019
Storage Center (scos) (ttyu0)
login: Kernel core dumps are enabled

Image copy and md5 check ... OK
Extracted app /mnt/diag/app.apiS.R07.01.20.028.tgz into /tmp.
Extracted app /mnt/diag/app.apiSM.R07.01.20.028.tgz into /tmp.
Extracted app /mnt/diag/app.au.R07.01.20.028.tgz into /tmp.
Extracted app /mnt/diag/app.setupd.R07.01.20.028.tgz into /tmp.
Extracted app /mnt/diag/app.snmp.R07.01.20.028.tgz into /tmp.
Extracted app /mnt/diag/app.webroot.R07.01.20.028.tgz into /tmp.
Finished apps install.
Module cml was already loaded
compellent : starting, rc_flags: -f , args:
SDR scan started.
Load of SDR headers complete... discovered SDRs = 170
SYSBmc Load sensor record data
SYSBmc Load sensor records complete
Discovered SDRs = 170
DMAPciDev::Search for devices SB:4...
DMAPciDev(0.4.0) Vendor:0x8086, Device:0x3c20, SubVendor:0x1028, SubSystem:0x48c,
PciRev:0x7
PciRev:0x7
PciRev:0x7
PciRev:0x7
PlxDmaPciDev::Search for devices...
DMAEngine::GlobalInit: CB status=0x0, PLX status=0x1<<<DMAEngineTask reserved 3 DMA
channels>>>
CHA3: wait for firmware to become operational(retries=180)
CHA firmware version 200081; no change required.
Cache Device Init:: safe NVDIMM capacitor array charge
CHA3 Memory Region: 0x811000000, Register Region: 0x810FFE000, Cache Region:
0x813000000 size 0x1E000000, Public Region: 0x813000200 size 0x1DFFFE00
resetlog.txt location = /mnt/root/resetlog.txt
reset state 8.393266: [Reset via Reset Monitor 06/24/2019 14:23:03 EEST
SysReset: reset with power cycle]
Initializing Subsystems (06/24/2019 02:29:39 PM)...

06:27.387_823_168, 06/24/2019 02:29:39 PM, [23999 PassZeroInit] PassZeroInit.
Serial Pass Complete at 06/24/2019 02:29:39 PM, Pass Durations: 00.017, Elapsed
Since Boot: 06:27.393 - Finished "PassZero", Starting "SetupTasks"
Controller Version: 07.01.20.028
Since Boot: 06:27.406 - Finished "SetupTasks", Starting "AllocateMemory"
ioengine/Cache/cacheSubsystem.cpp::1005 HEAPBlock pHeapBlock CHA3 recovery
allocated location [0x832400000]
util/general/sgListPriority.cpp::375: Installed memory[61384589312], scaled
systemPriority template maxbytes[55246130380]
06:27.559_018_585, 06/24/2019 02:29:39 PM, [23999 AllocateMemory] AllocateMemory.
Since Boot: 06:27.572 - Finished "AllocateMemory", Starting "RegisterConfiguration"
****** Register USB *********
Registering configuration
flashA file location = /mnt/root/flashA.dat
flashB file location = /mnt/root/flashB.dat

06:27.798_701_113, 06/24/2019 02:29:40 PM, [23999 RegisterConfiguration]
RegisterConfiguration.
Since Boot: 06:27.858 - Finished "RegisterConfiguration", Starting "DefineEvents"
06:27.858_400_931, 06/24/2019 02:29:40 PM, [23999 DefineEvents] DefineEvents.
Parallel Pass Complete at 06/24/2019 02:29:40 PM, Pass Durations: 00.002, Elapsed
Since Boot: 06:27.860 - Finished "DefineEvents", Starting "RegisterForEvents"
06:27.860_573_698, 06/24/2019 02:29:40 PM, [23999 RegisterForEvents]
RegisterForEvents.
Since Boot: 06:27.863 - Finished "RegisterForEvents", Starting "LoadBootStorage"
Command (Read Board Info Area, FRU ID 0, optimized, from thread [BMC FRU]) in
progress... Please wait.
No configuration selected for BootConfig.
CS Loading Default Config (BootConfig)
Since Boot: 06:29.679 - Finished "LoadBootStorage", Starting "RestoreBootStorage"
ACFirmwareLoads::GENERATESeed::HarvestSeeds: Generating Adapter Firmware Version
Table.
ACFirmwareLoads::GENERATESeed::HarvestSeeds: Creating vendorId[LSILOGIC]
productId[SAS3801E] revisionId[8] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[SAS3801E] RevisionId[8]
Generation[10] Type[FW] Version[1.31.2.0] File[3801eb3s_prod01310200.fw]
Package[1.0} Index[1]
Table.
productId[SAS31601E] revisionId[8] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[SAS31601E] RevisionId[8]
Generation[11] Type[FW] Version[1.33.0.0] File[31601eb3s_prod01330000_004.fw]
Table.
productId[SAS9201-16e] revisionId[2] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[SAS9201-16e]
RevisionId[2] Generation[17] Type[FW] Version[17.85.0.0]
File[920116eb1_prod17850000_20.fw] Package[1.0} Index[3]
Table.
productId[SAS9206-16E] revisionId[5] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[SAS9206-16E]
File[920616ed1_prod17850000_8.fw] Package[1.0} Index[4]
Table.
productId[Bristol-2308D1] revisionId[5] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[Bristol-2308D1]
File[B2308d1_prod17850000_5.fw] Package[1.0} Index[5]
Table.
ACFirmwareLoads::GENERATESeed::HarvestSeeds: Creating vendorId[PMC]
productId[PM8072] revisionId[5] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[PMC] ProductId[PM8072] RevisionId[5]
Generation[1] Type[FW] Version[3.4.14] File[SPCV12G_3041403.bin] Package[1.0}
Index[6]
Table.
ACFirmwareLoads::GENERATESeed::HarvestSeeds: Creating vendorId[PMC] productId[ASA-
80165H] revisionId[6] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[PMC] ProductId[ASA-80165H] RevisionId[6]
Generation[3] Type[FW] Version[3.7.46] File[SPCV12G_3074600.bin] Package[1.0}
Index[7]
Table.
80165H] revisionId[6] type[VPD]
Generation[4] Type[VPD] Version[3.5.2.5] File[SPCV12G_3050205_VPDv2.bin]
Table.
80165H] revisionId[6] type[ILA]
Generation[2] Type[ILA] Version[3.7.4] File[SPCV12G_3070400_ILA.bin] Package[1.0}
Index[9]
Table.
File[93008ec0_prod10150300_017.fw] Package[1.0} Index[10]
Table.
productId[Harpoon-3008i] revisionId[2] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[Harpoon-3008i]
File[Harpoon8i_prod10150300_023.fw] Package[1.0} Index[11]
Table.
productId[Harpoon-3008e] revisionId[2] type[FW]
ACFirmwareLoads::ParseCreate: VendorId[LSILOGIC] ProductId[Harpoon-3008e]
File[Harpoon8e_prod10150300_023.fw] Package[1.0} Index[12]
Table.
File[930516ea1_prod091510400_009.fw] Package[1.0} Index[13]
Table.
Since Boot: 06:29.681 - Finished "RestoreBootStorage", Starting "LinkBootStorage"
Error: This command allowed only with debug-build, or with LicenseTesting licensed-
feature enabled, or on 'in-house' system.
Error: This command allowed only with debug-build, or with LicenseTesting licensed-
feature enabled, or on 'in-house' system.
Since Boot: 06:30.072 - Finished "LinkBootStorage", Starting "InitializeIPC"
FMHeartbeat: Single controller or only controller running, timer stopped
Since Boot: 06:30.151 - Finished "InitializeIPC", Starting "SelectLeader"
FMHeartbeat: Single controller or only controller running, timer stopped
Since Boot: 06:30.154 - Finished "SelectLeader", Starting "InitializeIODrivers"
06:30.154_264_497, 06/24/2019 02:29:42 PM, [23999 InitializeIODrivers]
InitializeIODrivers.
InitIoDrivers: Slot=5 VendorId=1000 DeviceId=0x0064 SubsystemId=0x30d0
Revision=0x02 PortInst=1 PortNum=4
Revision=0x02 PortInst=2 PortNum(virtual)=3
InitIoDrivers: Slot=7 VendorId=8086 DeviceId=0x0374 SubsystemId=0x0032
InitIoDrivers: Slot=1 VendorId=1077 DeviceId=0x2532 SubsystemId=0x015d
SAS 6G HBA [slot=5, port=4] MPT Firmware Version (Major.Minor.Unit.Dev) = 17.85.0.0
SAS 6G HBA [slot=5, port=4] Ioc0: vendorId=0x1000, deviceId=0x0064,
subsysId=0x30D0, subsysVendorId=0x1000, classCode=67328, revisionId=0x02
SAS 6G HBA [slot=5, port=4] LSI2: Current Firmware Version: 17.85.0.0 NVDATA
Version: 17.0.0.20
SAS 6G HBA [slot=5, port=4] Base Firmware Load. Validating File.
SAS 6G HBA [slot=5, port=4] LSI2: Found Firmware Load file with version: 17.85.0.0
Nvdata=17.0.0.20. No Firmware update needed
SAS 6G HBA [slot=6, port=4] Ioc0: vendorId=0x1000, deviceId=0x0064,
subsysId=0x30D0, subsysVendorId=0x1000, classCode=67328, revisionId=0x02
SAS 6G HBA [slot=6, port=4] LSI2: Current Firmware Version: 17.85.0.0 NVDATA
Version: 17.0.0.20
SAS 6G HBA [slot=6, port=4] Base Firmware Load. Validating File.
SAS 6G HBA [slot=6, port=4] LSI2: Found Firmware Load file with version: 17.85.0.0
Nvdata=17.0.0.20. No Firmware update needed
Since Boot: 06:55.419 - Finished "InitializeIODrivers", Starting
"ConfigureIODrivers"
Since Boot: 06:55.420 - Finished "ConfigureIODrivers", Starting "Discovery"
06:55.420_513_852, 06/24/2019 02:30:07 PM, [23999 DiscoveryAsync] DiscoveryAsync.
2 paths found to 2 drives.
Since Boot: 06:55.440 - Finished "Discovery", Starting "LoadConfigStorage"
Waiting 180 secs for disks...
Running the job queue on the BMC.
WSMAN_Enumerate: Enumerating the BMC at: 169.254.0.1:443/wsman
WSMAN_Enumerate: From controller at: 169.254.0.2:80
WSMAN Schema: http://schemas.dell.com/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_SoftwareIdentity

[23999

New 12345676543

Uploaded by

Copyright:

Available Formats

New 12345676543

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

New 12345676543

Uploaded by

Copyright:

Available Formats

N_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>

Mon Jun 24 11:29:21 UTC 2019

Storage Center (scos) (ttyu0)

login: Kernel core dumps are enabled

Initializing Subsystems (06/24/2019 02:29:39 PM)...

flashB file location = /mnt/root/flashB.dat

Waiting 174 secs for disks...

You might also like