PRAMOD RAWAT

Permanent Address : H. No:204, Word No:34 , Pratap Nagar

Near Police Line Harson Ghaziabad ,PIN :201001, U.P
Mob No: +919599409423
Email: pramoddevelopment1989@gmail.com

OBJECTIVE: Seeking a challenging career in the field of R &D, Project

Planning ,New Product Development which makes career more
exciting and performance is rewarded with new responsibilities
and also power up my career with experience .
PROFESSIONAL SUMMARY:
 Having eight years of proficiency in project execution plan of vacuum pump, booster, heavy
earth equipments parts such that Excavators, Back hoe loaders, Sheet metal –fabrication,
forging & casting, Cable Kit Joint ( Compound Resin, Heat Shrink & Cold Shrink ).
 An effective communicator with excellent relationship management skills and strong analytical,
Problem solving & organizational abilities.
 Good knowledge & experience of developing process documents as per process engineering
function for R & D, NPD (APQP &PPAP) or customer specific requirements.
 Good command with efficient knowledge about certification standard such as
ATEX Product Certification, DSIR ( Department of Scientific and Industrial Research) , ISO 9001
: 2015 (Quality Management Systems), ISO 14001:2015 (Environment Management Systems),
OHSAS 18001:2007 (Occupational Health & Safety Management)
 Good experience in cost estimates for project and tooling cost estimation. Design and
Development plan preparation and implementation of conceptually new project and Re-
engineering and modifying the products to meet customers' needs.
 Identifying & solve assignable and chronic causes by the use of Quality tools such as 3M,
KAIZEN, GMP, VA/VE, CTQ & CTP parameters, POKA YOKE, CAPA for eliminating wastages
while enhancing plant efficiency and productivity.
 Co-ordinates with the Account Executive / manager, Logistics team material, engineering team for
troubleshooting and service team for smooth handover to ensure total customer satisfaction.
PROFESSIONAL EXPERIENCE:

Name of the Company Duration Designation

 EVEREST BLOWER SYSTEMS (P) LTD. 3/10/17- TILL DATE Sr. Engineer (R&D Dept)
 RADISH TECHNOLOGIES (RAMP GROUP) ALIGARH 10/7/17- 29/09/17 Sr. Engineer (NPD Dept)
 TAJ FORGING PVT LTD FARIDABAD 13/04/17 – 8/7/17 Sr. Engineer (NPD Dept)
 VENELEC ELECTROMECH IND. PVT. LTD. 7/05/15-10/03/17 Sr. Engineer (Project Dept)
 SUNPOWER GEN SYSTEMS & SERVICES 21/12/13- 15/02/15 Design Engineer (NPD Dept)
DUBAI ( part of supertech group)

 I-DESIGN ENGINEERING SOLUTION LTD. 17/01/11-11/12/13 Assistant Engineer (NPD Dept)

CHENNAI (part of RSB Transmission India ltd. )
JOB PROFILE ABOUT EVEREST BLOWER SYSTEMS (P) LTD.
 Working as a Senior Engineer: Responsible for all R&D process for new product, client
requirement ( material selection, drawing updating with inspection standard parameters, ECN)
as per efficiency of product, testing criteria, improve vacuum & pressure efficiency, smooth
assembly & disassembly procedure, document & tooling planning for new project such as
tooling cost estimation, Develop jig-fixture, locators and manufacturing drawing( machining,
assembly, cutting , bending ) as per job requirement.
 EVEREST BLOWER (P) SYSTEM is the leader in pressure & vacuum sector for dry screw
pump, blowers & vacuum boosters in India. Everest Blowers has been serving the industry from
last three decades and innovation has been key mantra. Under the Everest Group , all companies
are ATEX Product Certification, DSIR ( Department of Scientific and Industrial Research) ,ISO
and CE certified and follow the top standards of Environmental and Employee norms , making
EVEREST the number 1 manufacturer of Blowers in India.

JOB PROFILE ABOUT RADISH TECHNOLOGIES (RAMP GROUP) ALIGARH.

 Worked as a Senior Engineer: Responsible for all new product development process inside the
railway division such as APQP ( 1,Product Process Input Data - Engg. Drawing, Relevant
stds, Feasibility of mfg processes. 2, Product Process & Development -Process Flow, Control
Plan, RAW MATERIAL procurement, Tools/Die-fixture acc to processes, Packaging Standards
& Specifications. 3, Process Design & development- Acc to process flow diagram. 4, Product
& Process Validation - inspection report as per inspection standard parameter) PPAP, PCS,
COSTING.
 RADISH TECHNOLOGIES (RAMP GROUP) ALIGARH.Is the leading manufacturer of
Sheet metal fabrication work having efficient machine like CNC turning, VMC, Plasma cutting,
Shot blasting, Powder coating etc.
 Major Customer : Samsung, LG, Videocon, oppo, vivo, intex, Research Designs & Standards
Organization (RDSO), Railway Coach Factory.

JOB PROFILE ABOUT SUNPOWER GEN LLC (SUPER TECHNICAL FZCO DUBAI)
 Worked as a Design Engineer: Responsible for all manufacturing process inside the project
department such as job discussion with customer at customer end to understand function of
job, Project and Tooling cost estimation, Develop jig-fixture, locators and manufacturing
drawing( machining, assembly, cutting , bending ) as per job requirement.
 SUNPOWER GEN SYSTEMS & SERVICES LLC :working for gas turbine ,oil-gas
industries, automobile and valve sec. Sunpower gen has varies type of machine like cnc turning,
vmc, water jet, plasma cutting , honing , broaching , hobbing , orbit welding , cnc vtl , floor
boring , mazak integrex , 4th axis vmc ,cnc cylindrical grinder , lathe ,milling, etc.
 Major Customer :Dubal Aluminum, Al-Futtam, middle east fuji khimji shipping llc, pat kruger
systems middle east, al nabooda automobiles llc, Arabian chemical insulation company fzco, GE
Energy, Raj-Stone fujairah, Dubai refreshment , power-tech, Galadari trucks & Heavy Equipment
Co. Ltd (L.L.C) etc.

JOB PROFILE ABOUT I-DESIGN ENGINEERING SOLUTION LTD.(RSB CHENNAI)

 Worked as a Assistant Engineer: Responsible for all new product development activity inside
the new product development department such as Design and Development Plan Preparation ,
implementation of conceptually new project , Re-engineering , modifying the products to meet
customer needs, Develop jig-fixture, locators and manufacturing drawing( machining, assembly,
cutting , bending ) as per job requirement.
 I-DESIGN ENGINEERING SOLUTION LTD: is the R & D wing of RSB group. I-DESIGN
works on full cycle product development such as Designing , prototyping and testing.
 Major Customer : Telcon, caterpillar, Tata, JCB, ALJD, Volvo, Ashok Leyland etc

TECHNICAL SOFTWARE:
  Solid works : Solid modeling, Sheet metal, Assembly , Welding, Detailing.
 NX : Part modeling, Assembly, Detailing, Surface modeling, Molding.
 AutoCAD : Detailing .
INSTRUMENT KNOWLEDGE
 Contracer, Profile Projector, Hardness tester, Height Gauge, Vernier Calliper , Vernier bevel
protector, Bore Gauge, Micrometer & other instrument –gauges , CMM etc.

PROJECTS UNDERTAKEN:
 Various kinds of projects taken up in hydraulics and pneumatics cylinders, fuel nozzles, end
carriage wheel box, gear box, heavy earth equipments parts such that Excavators, Back hoe
loaders, Sheet metal fabrication.
Reverse Engineering:
1, Project involves in reverse engineering of gear box to manufacture new gear box.
Job Type : Vibrating Feeder Trolley Drive, Bi-Directional rotation ,
16kw/30kw-motor power, 980rpm/1500rpm-input speed, 21rpm-output speed,
ratio- 71.000/1 (nominal), 71.158/1( exact), 105kw- capacity, 3.5- safty factor over
30kw motor power, mineral oil with aditives ISO-VG 320 , 53liter -oil qty.
Software : Solid works .
Role : Designer & Development Engineer
Instrument use : Contracer, Height Gauge, Vernier Calliper , Vernier bevel protector, Bore
Gauge, Micrometer & other instrument –gauges.
Location : SUNPOWER GEN SYSTEMS & SERVICES DUBAI ( part of supertech group)

2, Project involves in reverse engineering of tail gate assembly of wheel dozer komastu.
Job Type : Fabrication part use in front of wheel dozer .
Software : Solid works and Autocad.
Role : Designer & Development Engineer
Instrument use : Contracer, Height Gauge, Vernier Calliper , Vernier bevel protector, Bore
Gauge, Micrometer & other instrument –gauges.
Location : SUNPOWER GEN SYSTEMS & SERVICES DUBAI ( part of supertech group

3, Project involves in reverse engineering of Buckets (.05m cub, .09m cub ) for 3 ton capacity Back
Hoe Loader Tools and developing 3D models, 2D drawings considering manufacturability.
Customer : Sojitz India pvt limited (Oct 2013)
Job Model : BHL-335 (in development stage )
Software : Pro/E Wildfire 4, AUTO CAD 2006, MS OFFICE.
Role : Team Leader ( Designer & Development Engineer )
Instrument use : CMM, Height Gauge, Vernier Calliper , Vernier bevel protector, Bore
Gauge, Micrometer & other instrument –gauges.
Location : RSB Transmission India ltd.

 Product Development:
1,Project involves in setup for new line development of Back Hoe Loader parts such as Chassis(Main
Frame) ,Loader-Boom, Swing-Support, Lift-Arm, Loader-Bucket, Hoe-Bucket, Upper Plate-
Weldment, Balance Arm Leaver, Front -Axle & other small components.
Customer : Leeboy India limited , Bangalore (Sept 12 to Feb13)
Project : BHL(Back Hoe Loader)-883 model .
Software : Pro/E Wildfire 4, AUTO CAD 2006, MS OFFICE.
Role : Team Leader (Process Engineer).
Location : I-DESIGN ENGINEERING SOLUTION LTD.(RSB CHENNAI)
 Responsibilities:
 Technical review with customer.
 APQP time line plan.
 Master list of drawings & drawings file, Bill of material, Alternative material approval from
customer.
 List of tooling, tooling design presentations , tooling design finalizations.
 Developing concept for new tools (fixtures, Drill-Jigs, Locaters, Press-Tool).
 Converting 2D drawing to 3D models for defining the manufacturing process such that
SWP(Standard Work Process), PFD(Process Flow Diagram),Process control plan, Material
traceability card, Weld matrix.
 Guide development team for develop prototype job.
 Sample Submissions with all documents.

3,Project involves in setup for new line development of New Perk Glucose chocolate.
Supplier : Forma makina Ltd Turkey (Sept 09 to Feb 10)
Project : New Park Glucose Line
Tools : Automatic Wafer Machine With Automatic Product Feeding System
Role : Asset Care Trainee.
Location : CADBURY INDIA LTD. MALANPUR

Responsibilities: -
 Discussion with CFT team about the “New Park Glucose” product to finalized needs.
 APQP time line plan.
 List of tooling, tooling design presentations .
 Developing concept for new tools (Automatic Wafer Machine ) for new line of ulta perk.
 Guide development team for develop prototype peaces.
 Collection all documents from supplier team.

EDUCATIONAL QUALIFICATION AND OTHER TECHNICAL QUALIFICATION


B.Tech in Mechanical branch from KSOU in 2016.

PDTDM(Post Diploma Tool Designing Manufacturing) from Central Tool Room Training
Centre Bhubanswer Orissa in 2011.
 Diploma in Mechanical Engineering from IASE DEEMED UNIVERSITY in 2009.
 Higher Secondary School Certificate from Police Modern School Ghaziabad (C.B.S.E
Board ) in 2005.
 High School Certificate from Police Modern School Ghaziabad (C.B.S.E Board ) in 2003.
PERSONAL PARTICULARS
Name : Pramod Rawat
Fathers name : Mr. Mahipal Rawt
Date of birth : 10/07/1989
Nationality : Indian
Martial status : Married
Languages known : Hindi, English.
Passport No : J2553156
Accepted Salary : As per company norms.

DECLARATION:
I here by declare that above mentioned details are correct and complete to the best of my
knowledge.
Place: Ghaziabad (Pramod Rawat)
Date: 24/07/19