DISTRIBUIDOR PARA ECUADOR ®

衄
, ,
鱼
COVNA
—VALVE —

VALVULAS SOLENOIDES

1S09001 CE RoHS 今昙

Instruction For Use I

COVNA® COVNA ®

一才可；一 －
一 VALVE 一
Solenoid Valve 2W Series
一VALVE 一
Solenoid Valve 2W Series

Characteristic: 1. Direct lifting diaphragm construction with Determine Valve Body Code
high frequency

匮
，如
瞿昌巨冒匾目
一
尸
lf<I•l:a

2. Open from O bar with large flow rate

�
3. Applied to low pressure system

勹
G- GiBSP 8- Brass N NBR 1.AC220V 2.DC24V
Medium: Steam and Hot Water, Civil gas, Oil, e1c. N - NPT thread S-Stainless steel E-EPDM 3.AC110V 4.DC12V
命

F - Flange V VITON
-
Temperature: N-NBR: -5°(to 80°(
UPI/C 5 AC24V 6DC6V

瞿瞿瞿匾匾雪瞿·＿＿—
E-EPDM : -5 C to 100 C
EXrv1APLE:HK08 25 GBN S21 H2, HK08 SERIES. NC, 25MM ORIFICE, 1"G, STAINLESS BODY, PET SEAL, COIL S21 H, AC220V, DIN
° °

V -VITON: -5 C to 120 (
° °

Pressure: O.OMpa-1.0Mpa Technical Parameters

Port Size: 3/8", 1/2", 3/4", 1", 1¼", 1归，2"
Port Thread: BSPP, BSPT, NPT, FLANGE > I NBR I 产DM I VITON I

昌； I
3/8'I ．

勹
O.OMPa
Orifice(mm): 15,20,25,32,40,50 匡噩瞿

------黜怂瞿
Voltage: DC-12V, 24V 15 4.5 O.OMPa 0.7MPa 0.7MPa
AC 24V, 120V, 240V/60Hz; 11OV,220V/50Hz 20 9.3 O.OMPa 0.7MPa 0.7MPa
Tolerance: 土10%
白

:: �� 0OMP, 0 7MP, 0 7MPa

-S'C-80它 4穴比100't -!穴比120它
Coils: Y32B, 40VA(AC), 18W(D0, 1P65,100%ED
Y42B, SOVA(AC), 20W(DC), JP65,10哗ED 酝尽，仁1/4' 32 24 1 0,0MPa 1.0MPa 1.0MPa
Material: Body- Brass or stainless steel UPVC - 1-1/2' 40 29 0,0MPa 1.0MPa 1.0MPa
Seal- VITON PTFE NBR EPDM 2' 50 48 O.OMPa 1. OMPa 1. OMPa
Armature Tub& Stainless Steel304
一一一，
-
Plunger- Stainless Steel 430F
Stop- SS 403F

B
Springs-SS 304
Shading Rings-Stainless Steel 304

2W Thread DN10-DN25 2W Thread DN32-DN50

匡雪匮玉删匠星匡巨巨瞿图王瞿 匡雪匮王瞿匮皿墨匮霆雪
-68 68 68 - 115 122 1邸

国：： ：:: : :
.. 56 56 56 切 ---,雪86 93 118.5
I Outline Size Drawing 153 160 180
153 160 180
1.AC220V •重 13.5 13.5 16.5 24 28 36
-------------------,
n.s

室
2.AC110V
3 AC24V
DN10 产－－－二二＿＿二--- .::_-_-__.:_ _-
1.DC24V DN15 I 2W Flange
2.DC12V 40VA 18W IP65
3.DC6V DN20 I
The voltage can
becu如med
DN25 I
一国国国皿匡霆匡匡 l
- 101 的0 的5 凶o 4-01,s 145 135 I

匡;:: 言 二二：：：：：：
WI
1 AC220V - 103 0100

室
2 AC110V
3.AC24V 。
DN32
s
1.DC24V 50VA20W IP65
2.DC12V DN40 ;:o
3.DC6V DN50 ＼ ---'- - 152 0142 10 076 4-018 200 200

i:21
句

The v o l ta g e ca n - 178 0155 0125 句6 4动18 212 212

be e u s ot me d
I_ _____________________ _
•
.函.,3

._
郊6
 ® ®
COVNA COVNA

一'
一VALVE 一
Solenoid Valve 2W21 S eries 一VALVE 一
Solenoid Valve'ZW21 Series

l'lil
Characteristic: 1. Direct lifting diaphragm construction with
high frequency
2. Open from Obar with large flow rate
匡 如•I:圈

Medium:
3. Applied to low pressure system
Steam and Hot Water,Civil gas, Oil, etc.
B-B,as,
II
S-Stainless 引到
N,NBR
E-EPDM
1 AC220V 2.DC24V
3 AC110V 4 DC12V
UPVC V-VITON

＿＿—
° °
I 5 AC24V 60C6V
Temperature: N-NBR: -5 (to 80 (
° °
E-EPDM : -5 C to 100 C EXMAPLE:HKOS 25 GBN S21H2, HKOS SERIES, NC, 25MM ORIFICE, 1"G, STAINLESS BODY, PET SEAL, COIL S21H, AC220V, DIN
° °
V-VITON: -5 (to 120 (
Technical Parameters
Pressure: O.OMpa-1.0Mpa
Port Size:
Port Thread:
3/8", 1/2", 3/4", 1", 1¼", 1½", 2"
BSPP, BSPT, NPT, FLANGE
瞿瞿匾昌匾雪瞿．
8./ ' 白示一一
屋：::
3 O.OMPa

------�·
Orifice(mm): 15,20,25,32,40,50 -
15 4.5 O.OMPa 0.7MPa 0.7MPa
Voltage: DC-12V, 24V
20 9.3 O.OMPa 0.7MPa 0.7MPa
AC-24V, 120V, 240V/60Hz; 11OV, 220V/50Hz
I :: 生�·: O.OMPo 0.7MPo 0.7MPo
Tolerance: 土10% -6't-80'C -5't-100'C -5'C-120它
Coils: SS1B: 30VA{AQ, 24W(DC), IP65,l碑ED
－仁 1/4'32 42 1 0,0MPa 1,0MPa 1,0MPa
SD01B: 28VA(AQ, 36W(DC), IP65,100%ED
Material: Body- Brass or stainless steel UPVC - 1-1/2' 40 29 0,0MPa 1.0MPa 1.0MPa
Seal- VITON PTFE NBR EPDM 2' 50 48 O.OMPa 1. OMPa 1. OMPa
一一一，
-
Armature Tub& Stainless Steel304
Plunger- Stainless Steel 430F
Stop- SS 403F
Springs-SS 304
Shading Rings-Stainless Steel 304

----- ---­
-
2W21 Thread

匡: :
68
DN10-DN25

97
2W21 Thread DN32-DN50

亘 :

56120110

56128117
I I :: :
啦5

匡
56 76
110 135

面玉
o '° 100 125 1::
Pr�::;! "
IE I
Model Picture Voltage�i�;r Outline Size Drawing

F---�二二＿＿二＿二：：二
. . － －－ 13.5. 13.5 16.5 20 瞿 24 28 36
1.AC220V
2.AC110V
－－－－－－－－－－－－－－－－－－－
DN10
3.AC24V
I 2W21 Flange

一昌圃匡匡匡黜回匡匡
1.DC24V DN15
30VA24W IP65 I
2.DC12 V DN20
3.DC6V DN25 I
The voltage can 111111101吟0
becustomed

．
-103 0100
1.AC220V

眶：： ：：：：：：
； ：：：
： ：二二
2 .AC110V -133 句 10 邻5的2 4-.014 162 152
3.AC24V DN32
1.DC24V -142 5 0132 0100 066 4-018 185 185
28VA 36W IP65 DN40
2.DC1 2V
A-

3.DC6V DN50

_
The vollage can
bOCUIJIOmad
COVNA® COVNA®
一 VALVE 一
Solenoid Valve 2W31 Series 一 VALVE 一
Solenoid Valve 2W31 Series

Characteristic: 1. Di『ect lifting diaphragm construction with

high frequency
2. Open from Obar with large flow rate
一才示paa

3. A pplied to low pressure system

+
G-G/BSP 8-Brass N NBR S91B 1AC220V 2.DC24V
Medium: Steam and Hot Water, Civil gas, Oil, etc. 巳EPDM S92B
N - NPT thread I 1S -Stainless steel 3.AC110V 4.DC12V
个

Temperature: N-NBR: -5 (to80 C F - Flange UPVC V-VITON SD01B

5.AC24V 6.DC6V
° °

E-EPDM : -s·c to 1oo·c

＿＿＿
V-VITON: -5 (to 12o·c EXMAPLE:HK08 25 GBN S21 H2, HK08 SERIES, NC, 25MM ORIFICE, 1"G, STAINLESS BODY, PET SEAL, COIL S21H, AC220V, DIN
°

Pressure: O.OMpa-1.0Mpa
Port Size: 3/8", 1/2", 3/4 ", 1", 1¾", 1½", 2" Technical Parameters
Port T hread: BSPP, BSPT, NPT, FLANGE
Orifice(mm): 15, 20, 25, 32, 40, 50 瞿瞿匾昌匾雪雪· >
I NBq I 产DM I VITON I
I O.OMPa ．
Voltage: DC-12V, 24V - 3/8'
AC-24V, 120V, 240V/60Hz; 11 OV, 220V/50Hz 15 生4.5 O.OMPa 0.7MPa 0.7MPa
Tolerance: 土10% ·:
20 9.3 O.OMPa 0.7MPa 0.7MPa
�
Coils: S91B, 22VA(AC),17W(DC), JP65, 100%ED
S92B, 22VA(AC),17W(DC), IP65 、 100%ED
SD018, 28VA(AC),36W(DC), IP65, 1000/4ED
屋:;:勹 I :: 0 OMPo O 7MPo O 7M Pa
-5它�ao'C -5'C-100't -5它-120tl

Material: Body- Brass or stainless steel UPVC

Seal- VITON PTFE NBR EPDM
－仁
------·址必凶瞿
1/4' 32 24 1 0,0MPa 1.0MPa 1.0MPa

＿仁1/2' 40 29 0,0MPa 1.0MPa 1.0MPa

A『mature Tube- Stainless Steel304
Plunger- Stainless Steel 430F 2' 50 48 O.OMPa 1. OMPa 1. OMPa
Stop- SS 403F 一一，

＿
-

＿
＿

＿
-
·1 1 1 1 1

llIIIIll
Springs-SS 304

I
Shading Rings-Stainless Steel 304

。
1.AC220V
----­ · ----· 2W31 Thread DN10-0N25 2W31 Thread DN32-DN50

目': :: �: :� ！ 冒目:: :: ::----:

匡
，--------------------
2.AC110V
3.AC24V ON10 68扔68 I 110 114 154
•
ON15
1.DC24V I 22VA IP65
2 .DC12V 17\IV DN20
3.DC6V
DN25
Thevolta泸C的
加customed - 13.5忔5 18.5 20 24 28 36
I
I -
1.AC220V
2.AC110V
DN10
-------------------
3.AC24V 2W31Flange
22VA DN 15 I

｀气
1.DC24\/ IP65 I
2.DC12V
3.DC6V
Th11vol诅伊1c11n
bee叩med
17W DN20
DN25
I
I I干简 序 昌瞿匡瞿冒
吟O 065 必0 4-014 150 140
103 0100 075 凶8 4-014 164 154
1.AC220V

汀广口
2.AC110V 133 0110 的2 4-.014 172 162
3.AC24V
-<2185
DN32 I 叨32 6100 066 4-018 198 198
1.DC24V 28VA IP65 I
36W DN40
2.DC12V I 152 0142 勾10 76 4-018 208 208
3.DC6V DN50 4
I
臼

178 0155 0125 096 4-018 220 220

The vol也gecan
bee叩med
I
._ ______________________
 --
COVNA® Solenoid Valve 2W-EX Series
COVNA® Solenoid Valve 2W-EX Series
-VALVE- -VALVE-

Characteristic: 1. Direct lifting diaphragm construction with

high frequency
2. Open from O bar with large flow rate ' FtNWE
10,15,20,
�
G • GIBSP B · Brass N-NBR 1.AC220V 2.DC24V
25,32,40,
3. Applied to low pressure system
N • NPT thread S-Stainless steel 3.AC110V 4.DC12V
50 V-VITON
E-EPDM
5.AC24V 6.DC6V
Medium: Steam and Hot Water, Civil gas, Oil, etc.
F • Flange l UPVC
Temperature: N-NBR: -5º( to 80 º(
E-EPDM: -5 º( to 1 OO ºC EXMAPLE:HKOS 25 GBN S21H2, HK08 SERIES, NC, 25MM ORIFICE, 1"G, STAINLESS BODY, PET SEAL , COIL S21H,AC220V, DIN
º º
V-VITON: -5 ( to 120 (
Pressure: O.OMpa-1.0Mpa Technical Parameters
Max Presume Operating Temperature
Port Size: 3/8", 1/2", 3/4", 1", 114", 1W', 2"
MMiMfuMM·titMM__ _
Mm Pressure
Port Thread: BSPP, BSPT, NPT, FLANGE NO 3/8 ª 10 4.5 O.OMPa 0.7MPa 0.7MPa
Orifice(mm): 15, 20, 25 , 32 , 40, 50
112• 15 4.5 O.OMPa 0.7MPa 0.7MPa
Voltage: DC-12V, 24V
3/4' 20 9.3 O.OMPa 0.7MPa 0.7MPa
AC-24V, 120V, 240V/60Hz; 11 OV, 220V/50Hz
Tolerance: ±10% 1º 25 12 O.OMPa 0.7MPa 0.7MP¡¡ -5'CN80'C -5'C-100'C -5'tN120't
CoiIs: Ex1620, 20VA(AC),16W(DC), IP65, 100%ED 1-1{4 º
32 24 O.OMPa 1.0MPa 1.0MPa
Material: Body- Brass or stainless steel UPVC
1-1/2' 40 29 0.0MPa 1.0MPa 1.0MPa
Seal- VITON PTFE NBR EPDM
2' 48 1. OMPa 1. OMPa

----
O.OMPa

-----,
50
Armature Tube- Stainless Steel304
Plunger- Stainless Steel 430F r----

o
Stop- SS 403F
Springs-SS 304 �

@)
Shading Rings- Stainless Steel 304
NC

.;.
2WEX Thread DN10·DN25

••
2WEX DN32-DN50

mlt'�!:ltll1�!111·111'1�¡1i·I
115 122 166

••11•
56 56 56 76 86 93 118·5
110 120 128 135 148 157 182
Voltage Motor I Protection Outllne Size Drawing

-m
20
Model Picture
I
100 110 117 125 148 157 182

---- -----
I
Power Class
I

95 13.5
---
13.5 16.5 24
-----
28 36

........
78

DN10 70
�
DN15
1.AC220V
2.AC110V
DN20
.. "'
3.AC24V
1 "'o
DN25 �
Size A

1.DC24V 20VA 2WEX-15

m
16W
�1 .� 1 090 065 040 4-014 145 135
2.DC12V 11 T4 2WEX-20
Exmb
3.DC6V
0100 e75 048 4-014 157 147

r,-@
DN32
1 6f�6�
¡--�--1 2WEX-25 0110 .085 062 4-014 162 152
066
DN40
2WEX-32
The vollaga can 1 72.S I
becuatomad 0132 .0100 4-.018 185 185
1
DN50
2WEX-40 0142 0110 076 4-.018 200 200
2WEX-50 0155
�---------------------
0125 212 212
-----------
096 4-li:118
COVNA® COVNA®
-VALVE- Solenoid Valve HK02 Señes -VALVE- Solenoid Valve HK02 Señes

..
Characteristic: 1. Direct acting mini construction at low power
consumption.
Technical Parameters
2. Compact design to save the space
3. Applied to low pressure system, open from O bar Min Pressure M ax Pres11L re Operating Ternperature

Medium: Air, Water, Steam, Oil, etc.

1/8" 1.0 0.10 O.OOMPa 2.SMPa
Temperature: NBR Sea 1: O't to BO't
EPDM Seal:-5'C to 1 OO't 1/8" 1.6 0.11 O.OOMPa 1.6MPa
VITON Seal:-5'C to 120't 1/8" 2.5 0.18 O.OOMPa 1.6MPa
PTF E Seal: -1 o't to 1 BO't
1/8" 3.0 0.30 0.00MPa 1.6MPa
Pressure: 0.0Mpa-1.6Mpa
Port Size: 1/8", 1/4", 3/8"
NC 174" 2.5 0.18 O.OOMPa 1.6MPa NBA : o'b - so'b
Port Thread: NPT, G
1/4" 3.0 0.30 O.OOMPa 1.6MPa EPDM :-5'b-100'b
Orifice(mm): 1.0, 1.6, 2.5, 3.0, 4.0, 5.0, 6.0
Voltage: DC-12V, 24V, 36V 1/4" 4.0 0.5 O.OOMPa 1.6MPa VITON:-5'b -120'b
AC-24V, 120V, 240V/60Hz; 11 OV, 220V/50Hz 3/8 º 2.5 0.18 O.OOMPa 1.6MPa PTFE : -10'b -180'b
Tolerance: ±10%
3/8
º
3.0 0.30 O.OOMPa 1.6MPa
Coi Is: S91 B,22VA(AC),17W(DC),lp65,100%ED
S92B,22VA(AC),17W(DC),lp65, 100%ED 3/8° 4.0 0.5 O.OOMPa 1.6MPa
Material: Body- Brass or stainless steel
3/8 º 5.0 0.71 O.OOMPa 1.6MPa
Seal - VITON,NBR,EPDM
Armature Tube - Stainless Steel304 3/8º 6.0 0.8 O.OOMPa 1.6MPa
Plunger - Stainless Steel 430F
Stop - SS 403F Outline Size Drawing
Springs - SS 304 NO
Shading Rings • Stainless Steel 304 75 75
43

rn
16

Coils Parameters

I I
HK02-1/8G(N) HK02-1/4G(N)
Voltage Motor Pro1ection Outline Size Drawing
Pictura
Power Class
71>

o
1.AC220V
2.AC110V
3.AC24V
1.DC24V 22VA17W IP65
2.DC12V
3.DC6V
The vollage can
bacustomad

., 18
1.AC220V
2.AC110V
3AC24V
1.DC24V 22VA17W IP65
2.DC12V
3.DC6V
Thevoltage can HK02-3/8G(N)
becustomed
COVNA® COVNA®
-VALVE- Solenoid Valve HK08 Series -VALVE- Solenoid Valve HKOS Señes

Characteristic:1. Direct lifting diaphragm construction with high

frequency
2. Open from O bar with large flow rate
3. Applied to low pressure system 12,15,20,
25,32,40,
G · G/BSP
N · NPT thread
NI
S · Stai nless steel PTFE
Graphite
- i
S51B
SD01B
FIEiJ
1.AC220V 2.DC24V
3.AC110V 4.DC12V
Medium: Steam and Hot Water, Civil gas, Oil, etc. 50 F • Flange 5.AC24V 6.DC6V
Temperature: PTFE Seal :-1O't to 1 BO't

......
EXMAPLE:HKOS SERIES, NC, 25MM ORIFICE, 1 "G, STAINLESS BODY, PET SEAL. COIL S21 H, AC220V, DIN
Graphite Seal:-1 O'C to 220't
Technical Parameters
Pressure: 0. 03Mpa-1.6Mpa

-
PortSize:
Port Thread:
3/8", 1/2", 3/4", 1", 1�·. 1Y:.", 2''
BSPP, BSPT, NPT, FLANGE
Size

HK08-12 3/8' 12 4.5

M 111 í're ssu re

0.03MPa
Maxrrcs��,e

1.6MPa
Operaling ,ernperature
111
Orifice(mm): 12, 15, 20, 25, 32, 40, 50
1/2' 15 4.5 0.03MPa 1.6MPa
Voltage: DC-12V, 24V
AC-24V, 120V, 240V/60Hz; 11 OV, 220V/50Hz 111111
HKOS-25
3/4'

1•
20

25
Q.3

12
0.03MPa

0.03MPa
1.6MPa

1.6MPa
±10% PTFE
Tolerance:
HKOB-32 1-114· 32 24 0.03MPa 1.6MPa -1ot�1aot
Coils: S51 B,30VA(AV),24W(DC),IP65, 100%ED
HK08-40 1-112" 40 29 0.03MPa 1.6MPa
Graphlte:
SD01B,28VA(AV),36W(DC),IP65, 100%ED
HKOS-50 2· 50 48 0.03MPa 1.6MPa -10'b-220'b
Material: Body - Brass or stainless steel
HKOaF-25 1• 25 12 0.03MPa 1.6MPa
Seal - VITON or PTFE
HKOSF-32 1·114' 32 24 0.03MPa 1.6MPa
Armature Tube - Stainless Steel304
HKOSF-40 1-112' 4D 29 0.03MPa 1.6MPa
Plunger - Stainless Steel 430F
HK08F-60 2· 50 48 0.03MPa 1.6MPa
Stop - SS 403F

------------------,
Springs - SS 304 Outline Size Drawing
Shading Rings - Stainless Steel 304

-
Hk08 Thread Hk08Flange

Coils Parameters

Voltage Mo1or I Protaction Outline Size Drawing

Power Class
74 o
1.AC220V e
2.AC110V
3.AC24V DN10
1.DC24V 30VA DN15 _¡_ I
2.DC12V IP65 1z,lf �g
24W DN20
3.DC6V
Special YOllage can
DN25 ' 1
V
be cuetomiied

Size A D jf..ccpd E

68.5 48.5 121.3 DN15

1.AC220V
2.AC110V
3.AC24V "' 78 57 127 DN20

1.DC24V 28VA r ,. _ 89 655 131. DN25

2.DC12V 36W
IP65 DN32
3.DC6V DN40 r-o�
J. m
120 94 177 DN32

Speclal voltllge can DN50 120 94 177 DN40

be customized 159 143 210 DN50
COVNA® COVNA®
-VALVE- Solenoid Valve HK08 Series -VALVE- Solenoid Valve HKOS Señes

Characteristic:1. Direct lifting diaphragm construction with high

frequency
NI - FIEi
e:=
2. Open from O bar with large flow rate i J
3. Applied to low pressure system 12,15,20, G · G/BSP S · Stainless steel PTFE 1.AC220V 2.DC24V
25,32,40, N · NPT thread Graphlte B
3.AC110V 4.DC12V
Medium: Steam and Hot Water, Civil gas, Oil, etc. 50 F • Flange 5.AC24V 6.DC6V
Temperature: PTFE Seal:-1 O't to 180'C

......
EXMAPLE:HKOS SERIES, NC, 25MM ORIFICE. 1 "G, STAINLESS BODY, PET SEAL. COIL S21 H, AC220V, DIN
Graphite Seal:-1o'C to 22o'b

Pressure: 0.03Mpa-1.6Mpa
Technical Parameters

-
111
Port Size: 3/8", 1/2", 3/4", 1",1Y..", 1%", 2"
Size M 111 í're ssu re Maxrrcs��,e Operaling ,ernperature

Port Thread: BSPP, BSPT, NPT , FLANGE

HK08-12 3/8' 12 4.5 0.03MPa 1.6MPa
Orifice(mm): 12,15,20,25,32,40,50
1/2' 15 4.5 0.03MPa 1.6MPa

111111
Voltage: DC-12V, 24V
3/4' 20 Q.3 0.03MPa 1.6MPa
AC-24V, 120V, 240V/60Hz; 110V,220V/50Hz
HKOS-25 1• 25 12 0.03MPa 1.6MPa
Tolerance: ±10% PTFE
HKOB-32 1-114" 32 24 0.03MPa 1.6MPa -1ot�1aot
Coils: S328,40VA(AV), 18W(DC),IP65, 100%ED
HK08-40 1-112" 40 29 0.03MPa 1.6MPa
S42B,50VA(AV),20W(DC),IP65, 100%ED Graphlte
HKOS-50 2· 50 48 0.03MPa 1.6MPa -10't-220't
Material: Body - Brass or stainless steel
HKOaF-25 1• 25 12 0.03MPa 1.6MPa
Seal - VITON or PTFE

Armature Tube - Stainless Steel304 HKOSF-32 1·114' 32 24 0.03MPa 1.6MPa

Plunger - Stainless Steel 430F HKOSF-40 1-112' 4D 29 0.03MPa 1.6MPa

Stop - SS 403F HK08F-60 2· 50 48 0.03MPa 1.6MPa

Springs - SS 304

Shading Rings • Stainless Steel 304

Outline Size Drawing

Hk08 Thread
---------, Hk08 Flange

Coils Parameters

Outline Size Drawing

--
12.5
e
1.AC220V 050

·1�1�[E
2.AC110V DN10 o
3.AC24V
DN15
1.DC24V 40VA 18W IP65
2.DC12V DN20
3.DC6V DN25
Specilll vol1Jlge can
be customized
Size A B o n-cpd E
91.S
68.5 48.5 121.3 DN15
1.AC220V -Pi-
2.AC110V
3 AC24V 1 1 78
89
57
65.5
127
131.
DN20
DN25
1.DC24V SOVA20W IP65 DN32
2.DC12V 120 94 177 DN32
DN40

1
3.DC6V 120 94 177 DN40
DN50 212:il
Special voltal¡e can ��

---- ----
b&c�lzed
068 159 143 210 DN50
COVNA® COVNA®
-VALVE- Solenoid Valve HK09 Series -VALVE- Solenoid Valve HK09 Señes

Characteristic:1. Pilot operated diaphragm construction with less power

consumption far longtime working
NI - FIEi
L
2. Seal serves long-time working in pipeline system i J
3. Used for long-time working in pipeline system 12,15,20, G · G/BSP B ·Brass PTFE 1.AC220V 2.DC24V
25,32,40, N · NPT thread S • Stainless steel Graphite 3.AC110V 4.DC12V
Medium: Steam, Hot Water, Oil, etc. 50 F • Flange 5.AC24V 6.DC6V
Temperalure: PTFE Seal:-10'Cto 180't
EXMAPLE:HKOS SERIES, NC, 25MM ORIFICE. 1"G, STAINLESS BODY, PET SEAL. COIL S21 H, AC220V, DIN
Graphite Seal :-1 O'C to 220't
Pressure: 0.05Mpa-1.6Mpa Technical Parameters
Port Size:
Port Thread:
3/8", 1/2", 3/4",1", 1%", 1%", 2"
G, BSP,NPT
Size

HK09-12
1111111111
3/8' 12 4.5
Min ?ressure

0.05MPa
Max Presuure

1.6MPa
Operatmg Tempera!urc
111
Orifice(mm): 12, 15, 20, 25, 32, 40, 50
HK09-16 112· 15 4.5 0.05MPa 1.6MPa
Voltage: DC-12V, 24V, 36V
HK09-20 3/4° 20 9.3 0.05MPa 1.6MPa
AC-24V, 120V, 240V/60Hz; 11 OV, 220V/50Hz
HK09-25 1· 25 12 0.05MPa 1.6MPa
Tolerance: ±10% PTFE:
HK09-32 1-114" 32 24 0.05MPa 1.&MPa -10't-180't
Coi Is: 821H,24VA(AC), 18W(DC), lp65, 100%ED
HK09-40 1-112" 40 29 0.05MPa 1.SMPa
Material: Body - Brass or stainless steel Graphlle:
HK09-50 2· 50 48 0.05MPa 1.6MP-a -10't-220'b
Seal - VITON,NBR,EPDM
HK09F-25 1• 25 12 0.05MPa 1.6MPa
Armature Tube - Stainless Steel304
HKosF-32 1-1/4" 32 24 0.05MPa 1.6MPa
Plunger- Stainless Steel 430F

*:ff NO
HK09F 40 1-112" 40 29 0.05MPa 1.6MP¡¡
Stop - SS 403F
Springs - SS 304 mm Ne HK09f-50 2· 50 48 0.05MPa 1.6MPa

Shading Rings - Stainless Steel 304 Outline Size Drawing

-------------1
Hk09 Thread Hk09 Flange

[]] rn

+
- -
- --
___./'

Coils Parameters

Modal I Plcture I Voltage 1 �g:«:, Protection

Class I Outline Size Drawing
l·iHtW
l·iii-
--- 73
73
48
48
A

113
113
Size

DN15
A
·--
A

n <Pd
- E

+·iM·M
1.AC220V DN20
2.AC110V 83 60 12s
3.AC24V
24VA i·it+W , ºº n 138 DN25
1.DC24V
2.DC12V 18W
IP65
i·IEfW 130 96 140 DN32
3.DC6V
N·IH·M 130 96 140 DN40
Special vottage can
be CUS10mlze(I i·IM·M 1ss 122 149 DN50
COVNA® COVNA®
-VALVE- Solenoid Valve HK10 Series -VALVE- Solenoid Valve HK10 Señes

Characteristic: 1. Pilot operated piston c onstruction with low

power consumption
- -= ¡¡¡¡.• ¡
�
2. Seal serves longtime at steam ambient i
12,15,20, G • G/BSP B ·Brass PTFE 1.AC220V 2 DC24 V
3. Used for long-time working in pipeline 25,32,40, N · NPT thread S · Stainless steel Gra phite B
3.AC110V 4.DC12V
50 F • Flange 5.AC24V 6.DC6V
system

Medium: Steam, Hot Water, Oil, etc . EXMAPLE HK08 SERIES. NC, 25fv1M ORIFICE. 1 "G, STAINLESS BODY, PET SEAL. COIL S21 H, AC220V, DIN

Temperature: PTFE Seal:-10't to 180't Technical Parameters

Pressure:
Graphite Seal:-10't to 220't

0.05Mpa-1.6Mpa NC
s,ze

HK10-12
111111111
3/8' 12 4.5
M111 Pressure

0.05MPa
MaxPresuure

1.6MPa
Operating iemperature
111
Port Size: 1/2", 3/4", 1", 11/.í", 1W', 2"
HK10-15 1/2' 15 4.5 0.05MPa 1.oMPa

Port T hread: G, BSP,NPT HK10-20 3/4' 20 9.3 0.05MPa 1.6MPa

Orifice(mm): 12, 15, 20, 25, 32, 40, 50 HK10-25 1· 25 12 0.05MPa 1.6MPa

Volta ge: DC-12V, 24V, 36V 32

PTFE:
HK10-32 1-1!4" 24 0,05MPa 1.6MPa
-10'C-180'C
AC-24V, 120V, 240V/60Hz; 11OV, 220V/50Hz HK10-40 1-112· 40 29 0.05MPa 1.6MPs1
Graphlte:
HK10-50 2· 50 48 O.OSMPa 1.6MPa
Tolerance: ±10% -10t-22ot

HK10F-25 1• 25 12 0.05MPa 1.6MPa

Coi Is: Y21H, 28VA(AC), 22W(DC), lp65, 100%ED
HK10F-92 1-1'14' 32 24 0.05MPa 1.BMPa
Material: Body - Brass or stainless steel
HK10F-40 1-112· 40 29 0.05MPa 1.6MPa
Seal - PET
HKIOF-60 2· 50 48 0.05MPa 1.6MPa
Armature Tube - Stainless Steel304
Outline Size Drawing
Plunger - Stainless Steel 430F
Hk10 Thread
---------, Hk10 Flange
Stop - SS 403F

Springs - SS 304

Shading Rings . Stainless Steel 304

Coils Parameters

1.AC220V
Class I
Protectlon Available
For I Outllne Slze Drawlng

2.AC110V
3.AC24V
1.DC24V 18VA 16W
2.DC12V
3.DC6V
Special Voltage Can
BeCustomized
73 48 176
085
1.AC220V 83 60 189.5
2.AC110V
3.AC24V 100 72 189.5
1.DC24V 70VA50W 130 96 214
2.DC12V
3.DC6V
130 96 214
155 228
1
Special Voltaga Can 1 122
BeCustomized
COVNA® COVNA®
-VALVE- Solenoid Valve HK11 Series -VALVE- Solenoid Valve HK11 Series

Characteristic: with timar, automatically drain at settled time. Widely Specification of The Timer
used in filter machine, separator, air tank, dripping KLT-R
feet and other air compressor system parts. Drain
24-380V ACIDC-50HZ/60Hz
lasting time and separationtime is adjustable. for ºCE"Marked Timer
Medium: Air, water
º 4mAMax
Fluid Temp: NBR: -5 C - 80°C
EPDM:- 5 ºC - 100º( -1 O 'C �+50-C
IP65-EN 60529
VITON: -5 °C - 120°C
Fleme Aetardant Abs Plastic
Pressure: 0-1. 6 Mpa
From O.Sto 10S.
Port slze: 1/2"
From 0.5 to 45min
Thread: G thread
YellowLED
Orífice: 3.0mm
Test
Voltage: DC-12V, 24V
OIN43650A
AC-24V, 120V,240V/60HZ; 11OV,220V/50H2.
Toleranca: ±10% Outline Size Drawing
Coil: $11 B, 24VA(AC), 18W (DC), IP65, 100%ED 90 42.5

$918, 22VA(AC), 17W(DC), IP65, 100%ED

Material: Body-Brass or Stainless sleel
Seal-NBR, EPDM. VITON
Tube-SS 304
·ti :/J�
o, !�

<;fl:'ot�
os �

Plunger-SS430F
Stop-SS430F 0)
.....
.....
Spring-SS304
Shading rings-red copper

Coils Parameters
Model I Picture Voltage
111a11111 Outline Size Drawing
47.5
24

1.AC220V
020
0101 se installation instructions
2.AC110V � • Two position,two way,normal ctose switch,magnetic solenoid water valve
3.AC24V

�3
• Can be installed any angle,but it is a good coice when the horixontal tube keep upward
1.DC24V
2.0C12V
g: • Used to control automatically the liquid and gas in the pipeline
3.DC6V 24VA18W IP65
Speclal voltage can
be customized

�.11�r�11
1.AC220V 36
2.AC110V "' 1 1
3.AC24V
1.DC24V
2.DC12V 22VA17W IP65 o

3.0C6V
�
Speclal vollage can
be customized
COVNA® COVNA ®
-VALVE- Solenoid Valve HK11-2 Series -VALVE- Solenoid Valve HK11-2 Series

Characteristic: with timar, automatically drain at settled time. Widely Specification of The Timer
used in filter machina, separator, air tank, dripping KLT-R
feet and other air compressor system parts. Drain
24-380V AC/DC-50HZ/60Hz
lasting time and separationtime is adjustable. for "CE"Marked Timar
Medium: Air, water
4mAMax
Fluid Temp: NBR: - 5 ºC - 80ºC
-10-C-+50-C
EPDM: - 5 ºC - 100º(
IP65-EN 60529
VITON: -5 º( - 120º(
Flama Retardant Abs Plastlc
Pressure: 0-1. 6 Mpa
From 0.5 to 10s.
Port slze: 1/2" From 0.5 to 45min
Thread: G thread YellowLED
Orifice: 3.0mm Tes1
Voltage: DC-12V, 24V DIN43650A

AC-24V, 120V,240V/60HZ;11OV,220V/SOHZ

.. ---- ---- -- - ---- - - -- -- - - --- -- - -- -"le

Outl ine Size Drawing
Tolerance: ±10%
..
r - - - - - - - - .. ... - - - - - - - - - - - - - - - - ,. - - - - -,

..
'
•
$118, 24VA(AC), 18W(DC), IP65, 100%ED
91 42.5 •
'

..
Coil:
S91B, 22VA(AC), 17W(DC), IP65, 100%ED .. : 9�:
.. ��·�
Material: Body-Brass or Stainless steel
... G
1
"<
Seal-NBR, EPDM, VITON
. � ...,.,

Tube-SS 304 .. -
('J

Plunger-SS430F
.. . 77.7
G1

·--·--·--·-------
- - - - - -· -- ·- ·-----------
- - -- - - - - ------ - - --·
-------·- · - ··-- ---- -----
-- - --·- ·----- - -- - --- -· ---
- ----------
... - - - --- ---
- _,·•
Stop-SS430F �

Spring-SS304
....
· -------
Shading rings-red copper

Coils Parameters
Voltage
lltlMil Outllne Slze Drawing

1.AC220V 1 �[ �
2.AC110V
3.AC24V 46 24.9

·------- ·- ·-------··· ·-------- · ··------· ····----- ·-· · · ·--------- - ····· ··'

113
1.DC24V 1

2.DC12V
24VA18W IP65
3 .DC6V
Special voltage can installation instructions
be customized • Two position,two way,normal clase switch,magnetic solenoid water valve
47
• Can be installed any angle,but i1 is a good coice when the horixontal tube keep upward
1.AC220V • Used to control automatically the liquid and gas in the pipeline
2.AC110V
3.AC24V
1.DC24V
2.DC12V 22VA17W IP65
3.DC6V
Special voltage can
be customized
COVNA® COVNA®
-VALVE- Solenoid Valve HK11-4 Series -VALVE- Solenoid Valve HK11-4 Series

Characteristic: 1. Direct lifting diaphragm construction with

high frequency
2. Open from O bar with large flow rate
3. Applied to low pressure system 1 o, 15,20. N-NBR S91B
G-G/BSP B-Brass 1.AC220V 2.DC24V
Medium: Steam and Hot Water, Civil gas, Oíl, etc. 25,32,40, N. NPT thread S -Stainless steel E-EPDM SD01B 3.AC110V 4.DC12V
50 V-VITON
Temperature: N-NBR: -5º( to 80º( 5.AC24V 6.DC6V
E-EPDM : -5º( to 1OOºC
EXMAPLE: HK08 SERIES, NC, 25MM ORIFICE, 1 "G. STAINLESS BODY, PET SEAL, COIL S21H, AC220V, DIN
V-VITON: -5º( to 12o·c
Pressure: O.OMpa-1.0Mpa Technical Parameters
Port Size: 3/8", 112'', 3/4", 1", 1 Y.", 1'h", 2" Max Presuure Oper�ling Temperat,.re

WiiH·WMMtliiM-mMi•i•IM
Min Pressure
Port T hread: BSPP, BSPT, NPT
Orifice(mm): 15, 20, 25, 32, 40, 50 3/8' 10 4.5 O.OMPa 0.7MPa 0.7MPa

Voltage: DC-12V, 24V 1/2' 15 4.5 O.OMPa 0.7MPa 0.7MPa

........................................ ........................................
AC- 24V, 120V, 240V/60Hz; 11OV, 220VJ50Hz 3/4' 20 9.3 O.OMPa 0.7MPa 0.7MPa
Tolerance: ±10% 1• 25 12 O.OMPa 0.7MPa 0.7MPa
S91B, 22VA(AC),17W(DC), IP65, 100%ED -5't-80'C -5't:-1 OO'C -5'C-120'C
Coi Is:
SD01B, 28VA(AC),36W(DC), IP65, 1000/oED
1-1{4" 32 24 O.OMPa 1.0MPa 1.0MPa
Material: Body- Brass or stainless steel
1-1/2" 40 29 O.OMPa 1.0MPa 1.0MPa
Seal- VITON PTFE NBR EPDM
Armature Tube- Stainless Steel304 2• 50 48 O.OMPa 1. OMPa 1. OMPa
Plunger- Stainless Steel 430F
Stop- SS 403F
Springs-SS 304 NC NO

I I
Shading Rings- Stainless Steel 304

Model I Plcture
I Voltage

1.AC220V
I Motor Protecti on Available
Power , Class For I Outline Size Drawing
o
2.AC110V
3.AC24V DN10
1.DC24V 22VA DN15
IP65
2.DC12V 17W ON20
3.DC6V ON25
The voltage can
becu.stcmed

1.AC220V
o
2.AC110V
' 1
3.AC24V ON32 •• B A
1.DC24V 28VA IP65 �-0-�.:¡

--
36W DN40 .!..�
2.DC12V
3.DC6V DN50

--
The voltage can
be cu.stcmed

-
--
Modal Specification Modal Specification 3/8" 68 56 I 13.5

--
TheLargest 1/2" 66 56 I 13. 5
Porer Sipply 24-380V ACIDC-50HZ/60Hz

--
Current 4mAMax
Ciltage ror "CE"Marked Tlmer Consumptlon 3/4" 68 56 141 16 5

--
Electrcal Water 1" 97 76 I 20
Conneetion DIN43650A ProofGrade IP65-EN 60529
1-1/4" 110 86 I 24
Time lnterval
Shell Material Rame Retaldant Abs Plastic (OFF) From 0.5 to 1 Os.
1-1/2" 114 93 I 28
Amblent Discharge Time
Temperatura -10'(>+50"C (NO) From 0.5 to 45mln 2" 154 118 ! 36
Manual lndlcator Lamp YellowLED
TestButton Test
COVNA® Solenoid Valve HK14/12 Series
COVNA® Solenoid Valve HK14/12 Series
-VALVE- -VALVE-

Characteristic: 1 . High pressure solenoid valve with Pilot

operated diaphragm construction for

compress air machine, injecting plastic machine

2. With PARKER seals to improve the quality

3/8"
1/2"
G • G/BSP
N · NPT thread
B ·Brass
S • Stainless steel
-
¡:r- i

3
¡¡¡¡.• ¡
1.AC220V 2 DC24V
3.AC110V 4.DC12V
3/4" 5.AC24V 6.DC6V
Medium: Water, Hot Water, Compressed Air, Oíl, etc.

Te mperature: VITON Seal:-1 O't to 150'C

........
Pressure: 0.03Mpa-5.0Mpa Technical Parameters
Port Size: 3/8", 1/2'', 3/4"
Operal111g
Port Thread: BSPP, BSPT, NPT, Flange Min Pressure Max Presuure V'Jeight
,err,peruture

Orifice(mm ): 15 - 3/8" 15 4.5 0.03MPa 5.0MPa

Voltage: DC-12V, 24V PU
HK14 HK12 - 112· 15 4.5 0.03MPa 5.0MPa
-30'C-150'C
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz
- 3/4" 15 4.5 0.03MPa, 5.0MPa
Tolerance: ±10%

CoiIs: S91 B, 22VA(AC ), 17W(DC), lp65, 1 00%ED

Outline Size Drawing
0543, 22VA(AC), 13W(DC), lp65, 100%ED

Material: Body- Brass or SUS 304

Seal- PU

Armature Tube - Stainless Steel304

Plunger- Stainless Steel 430F

o
Stop - SUS 403F

Springs - SUS 304

Shading Rings - Stainless Steel 304

NC NO
Coils Parameters

Voltage Motor Protection Outline Size Drawing

Power Class
47
43
75 50 108 14 65.5 50 132 14
1 AC220V
2.AC110V
3 AC24V
!2�a11: N
r 38
1 75 50 108 14 65.5 50 132 14

�[g
1.DC24V 22VA
IP65 75 50 108 14 65.5 50 132 14
2.DC12V 17W
3.DC6V
Special Vollage Can
Be Customized

1 .AC220V
2.AC11 OV
3.AC24V
22VA
1.DC24V IP65
2.DC12V 13W
3.DC6V
Special Vollage can
Be Cu&tomizHd
 ® ®
COVNA
- VALVE -
COVNA
- VALVE -
Solenoid Valve HKG11 Series Solenoid Valve HKG11 Series

Characteristic: 1. Direct acting mini construction at low power consumption.

2. Compact design to save the space

Mili NI iifri
l
3. Applied to low pressure system, open from O bar l l
1/8" 8-Brass NBR
Medium: Air, Water, Steam, Oil, etc. 1.AC220V 2.DC24V
1/4" S -Stainless steel EPDM 3.AC110V 4.DC12V
Temperature: NBR Seal:O'C to 80'C VITON
5.AC24V 6.DC6V

EPDM Seal:-5'C to 100'C

-- •
V ITON Seal :-5'C to 120'C
Te chnical Parameters
Pressure: O.O Mpa-1.0Mpa
Top Onf1ce Operating Temperature
Port Size: 1/8", 1/4" Cv
mm
Port Thread: BSPP, BSPT, NPT 1/8" 1.6 1.5 0.25 O.OOMPa 1.0MPa
Orifice(mm) : 1. 6, 2.0, 2.5, 3.0,3.5, 4.0, 5.0 1/8" 2.5 1.5 0.25 0.00MPa 1.0MPa
Voltage: OC-12V, 24V, 36V 1/8" 3.0 1.5 0.35 O.OOMPa 1.0MPa
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz 1/8" 4.0 1.5 0.50 O.OOMPa 1.0MPa NBR : o'C - ao'C
Tolerance: ±10%
1/4" 1.6 1.5 0.25 O.OOMPa 1.0MPa EPDM :-5°C -100°C
Coils: S91B, 22VA(AC),17W(DC), lp65,100%ED VITON:-5°C - 120°C
1/4" 2.5 1.5 0.35 O.OOMPa 1.0MPa
SA11B, 9VA(AC),6W(DC), lp65,100%ED
1/4" 3.0 1.5 0.4 O.OOMPa 1.0MPa
NASS COIL 0543 on request
1/4" 3.5 1.5 0.5 0.00MPa 1.0MPa
Material: Body - Brass or stainless steel
o 1/4" 4.0 1.5 0.61 O.OOMPa 1.0MPa
Seal - VITON, NBR, EPDM,

Armature Tube - Stainless Steel304 Outline Size Drawing

Plunger - Stainless Steel 430F
75 36
43
Stop - SS 403F

Springs - SS 304

rn
Shading Rings - Stainless Steel 304 ._NC

Coils Parameters

19.0
1.AC220V
2.AC11 OV A
3.AC24V
1.DC24V 22VA17W IP65
2.DC12V 40.5 G(NPT)3/8
3.DC6V
Special Voltage Can
Be Cuslomized

1.AC220V
2.AC11OV
3.AC24V
1.DC24V 6.5W IP65
2.DC12V
3.DC6V
Special Voltage Can
Be Cuslomized
COVNA® COVNA ®
-VALVE- Solenoid Valve HKPF Series -VALVE- Solenoid Valve HKPF Series

•1
Characteristic: 1. Direct lifting diaphragm construction with
high frequency
IH+i
l
2. Open from O bar with large flow rate +
10,15,20, B - Brass N-NBR
3. Applied to low pressure system G -G/BSP 1.AC220V 2.DC24V
25,32.40, N · NPT thread S -Stainless steel E-EPDM
3.AC110V 4.DC12V
Medium: Steam and Hot Water, Civil gas, Oíl, etc. 50 F · Flange UPVC V-VITON
5.AC24V 6DC6V
Temperature: N-NBR: -5ºC to 80º(
º
E-EPDM : -5ºC to 1OO C EXMAPLE:HK08 SERIES, NC, 25MM ORIFICE, 1"G, STAINLESS BODY, PET SEAL, COIL S21 H,AC220V, DIN
V-VI TON: -5ºC to 120ºC Technical Parameters
Pressure: O.OMpa-1.0Mpa
Max Presuura Oper atíng Tomperaturo

MiHlWWM•iiiW_..M#A·M
Porl Size
PortSize: 3/8", 1/2", 3/4", 1", 1�", 1- W', 2" Size Oriíice Cv Mon Pressure

Port Thread: BSPP, BSPT, NPT, FLAN GE NO HKPF-10 3/8• 10 4.5 O.OMPa 0.7MPa 0,7MPa
Orifice(mm): 15, 20, 25, 32, 40, 50
HKPF-16 1/2' 15 4.5 O.OMPa 0.7MPa 0.7MPa
Voltage: DC-12V, 24V
HKPF-20 3/4' 20 9.3 O.OMPa 0.7MPa 0.7MPa
AC-24 V, 120V, 240V /60Hz; 11 OV, 220V /50Hz
HKPF-25 1· 25 12 O.OMPa 0.7MPa 0.7MPa
Tolerance: ±10% -5'tN80t -st-1oot -5tN120't
AC(2
Coi Is: F14, 26VA(AC), 13W(DC), IP68, 100%ED
HKPF-32 1-1{4" 32 24 O.OMPa 1.0MPa 1.0MPa
F24, 28VA(AC), 15W(DC), IP68, 100%ED
Material: Body- Brass or stainless steel UPVC HKPF-40 1-1/2' 40 29 O.OMPa 1.0MPa 1.0MPa

---------
Seal- VITON PTFE NBR EPDM 50
-----
HKPF-50 2' 48 O.OMPa 1. OMPa 1. OMPa
Armature Tube-Stainless Steel304
Plunger- Stainless Steel 430F
Stop- SS 403F
Springs-SS 304
Shading Rings-Stainless Steel 304 NC
o

A A
HKPF Thread DN10-DN25 HKPF DN32-DN50

•·HEPl··IIHMiiiihii#1·11HHi#+I m11M11t110EP1i···Hiiii··
-2· 68 68 97 w;=w 115 166

I
68 122
•=• •-
I 11 11
56 56 56 76 86 93 118.5
Motor Protection � :. - 100 122 127 133 153 160 180
Picture Voltage
Power Class 90 112 117 123 153 160 180
•·- 13.5 13.5 16.5 2 •·- 24 28 36

-------------------,
1.AC220V
2.AC11 OV
3.AC24V
DN10 1
1.DC24V DN15 1 = HKPF Flange I

o
26VA 13W IP68
2.DC12V 1 E
3.DC6V DN20
1
Sl,rn A o n-fl'd t-N-0--,-N-
C
-
The voltage can DN25
beeustomed ·-..... 1 HKPF-15 101 090 065 040 4-.014 145 135

1
"" 1
r�
HKPF-20 103 0100 075 �'48 4-.014 157 147
1.AC220V 1
2.AC110V N� r 055.5
1 . - HKPF-25 133 011 O �85 062 4-.014 162 152
3.AC24V
DN32 1 0132 .0100 066 4-01 a 185 185
1.DC24V IP68 HKPF-32
2.DC12V
28VA 15W DN40
DN50 HKPF-40 0142 011 O 076 4-.018 200 200

---
3.DC6V
°""
�-----------------------
The voltage can i-- --�

be customed
� HKPF-50 178 0155 0125 096 4-018 212 2 12
4�mm
COVNA® COVNA®
-VALVE- Solenoid Valve UW Series -VALVE- Solenoid Valve UWSeries

Characteristic: 1. Direct lifting diaphragm construction with

high frequency
2. Open from O bar with large flow rate •1 �
'-----.fihi
3. Applied to low pressure system 10,15,20, B· Brass N-NBR
G- GiBSP 1 AC220V 2 DC24V
Medium: Steam and Hot Water, Civil gas, Oíl, etc. 25,32,40, N · NPT thread S -Stainless steel E-EPDM
3.AC110V 4.DC12V
50 F · Flange UPVC V -VITON
Temperature: N-NBR: -5ºC to 80ºC 5.AC24V 6.DC6V
º
E-EPDM : -5 C to 1 OOºC
º
EXMAPLE:HK08 25 GBN 821 H2, HK08 SERIES. NC, 25Mív1 ORIFICE, 1"G, STAINLESS BODY, PET SEAL, COIL 821 H, AC220V, DIN
V-VI TON: -5ºC to 120 C
Pressure: O.OMpa-1.0Mpa Technical Parameters
Port Size: 3/8", 1/2", 3/4", 1", 1 �", 1�", 2" Max Presuure Oper.slir,g Ternperal�re

W4WMMM•Mi·tM--Pi•i•IM
Min Pressure
Port Thread: BSPP, BSPT, NPT , FLAN GE
Orifice(mm): 15, 20, 25, 32, 40, 50 NO 3/8' 10 4.5 O.OMPa 0.7MPa 0.7MPa

Voltage: DC-12V, 24V 1/2' 15 4.5 O.OMPa 0.7MPa 0.7MPa

AC-24V, 120V, 240V/60Hz; 11 OV, 220V/50Hz 3/4' 20 9.3 O.OMPa 0.7MPa 0.7MPa

Toleran ce: ±10% 1' 25 12 O.OMPa 0.7MPa 0.7MPa

-5't-80'C -5't-100't -5'C-120't
CoiIs: Y32B, 40VA(AC), 18W(DC), 1P65,100%ED
Y42B, SOVA(AC), 20W(DC), IP65,100%ED 1-1(4" 32 24 O.OMPa 1.0MPa 1.0MPa
Material: Body- Brass or stainless steel UPVC 1-1/2' 40 29 O.OMPa 1.0MPa 1.0MPa
Seal- VITON PTFE NBR EPDM
2' 50 48 O.OMPa 1. OMPa 1. OMPa
Armature Tube- Stainless Steel304
Plunger- Stainless Steel 430F r-
Stop- SS 403F
Springs-SS 304
Shading Rings-Stainless Steel 304
NC

o
A
Thread DN10-DN25 Thread DN32-DN50

•@@l·Mlfü'i·Mdi)·IM9i!M
68 68 68 97
•+titlM##t·MH+M
115 122 166
- ..
M=M
111
56 56 56 76 86 93 118.5
Outline Size Drawing 95 115 120 127 153 160 180
92 112 117 123 153 160 180
n.s
13.5 13. 5 16.5 20 24 28 36

---------------------,1
1.AC220V 010 -·-
2.AC110V -r--;--r-
025
3.AC24V
DN10
1.DC24V �:; Flange
DN15
2.DC12V 40VA 18W IP65 1

1�
DN20 '� E
3.DC6V
DN25
Size A B e D n-cpd
NO NC
1
Thevoltage can 1
becustomed 048

91S
UW-15 •• 065 040 4-014 145 135
1.AC220V UW-20 103 0100 075 048 4-.014 157 147
--r�

[E
2.AC110V
3.AC24V
DN32 1 -�-- UW-25 0110 085
moa
062 4-014 162 152

1.DC24V
50VA20W IP65 DN40
1
;.* UW-32 0132 066 4-018 185 185
2.DC12V
3.DC6V DN50 U W-40 0142 0110 076 4-018 200 200

}I
- l

I_
The voltage can _(>20.3 UW-50 178 0155 0125 !?R6 4-018 212 212
beoustomed 006
COVNA® COVNA®
-VALVE- -VALVE-
Civil Gas Solenoid Valve ZCM11 Series Civil Gas Solenoid Valve ZCM11 Series

Characteristic: 1. Direct lifting diaphrag.m construction with

high frequency

2. High speed to open and clase

NI
15,20, G- G/BSP S91B
3. Applied to gas
1.AC220V 2.DC24V
25,32, N - NPT thread SD01B
3.AC110V 4.DC12V
Medium: Civil gas
40,50 5.AC24V 6.DC6V

Temperature: NBR Seal:-5·c to 80t EXMAPLE:ZCM11 15 G BN S91B1,ZCM SERIES, NC, 15MM ORIFICE, 1/2"G, BRASS BODY, N BR SEAL, COIL S91 B,AC220V, DIN

Pressure: 0.00Mpa-0.4Mpa Technical Parameters

Port Size: 1/2", 3/4",1", 11/.í", 1Y:z", 2" �ax Pre�uure

MHJWWM•kif44M
Min Pressure

Port Thread: BSPP, BSPT, NPT

112· 15 4.5 O.OMPa 0.4MPa 0.4MPa
Orifice{mm): 15, 20, 25, 32, 40, 50
3/4" 20 9.3 O.OMPa 0.4MPa 0.4MPa
Voltage: DC-12V, 24V
1· 25 12 O.OMPa 0.4MPa 0.4MPa
NBR
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz -st-aot
1-1/4" 32 24 O.OMPa 0.4MPa 0.4MPa
Tolerance: ±10%
1-1/2 ° 40 29 O.OMPa 0.4MPa 0.4MPa
Coi Is: 891 B, 22VA(AC), 17W(DC), lp65, 100%ED
2' 50 48 0.0MPa 0.4MPa 0.4MPa

----
80001 B,35VA(AC), 30W(DC), lp65, 100%ED

Material: Body- Brass Outline Size Drawing

Seal - VITON,EPDM.NBR

Armature Tube - Stainless Steel304 68 56 95 13.5

Plunger - Stainless Steel 430F 68 56 102 16.5

(,)
Stop - SS403F 95 72 115. 20

Springs - SS 304 125 95 170 30

Shading Rings - Stainless Steel 304 125 95 170 30

170 125 210 38

Voltage I Motor I Protectlon I Outline Size Drawing

Powar Class

·;rn
4
•7

1.AC220V
2.AC110V
3.AC24V
,�1 o "' 1 3
6

22VA
1.DC24V IP65 o
17W

1�-
2.DC12V
3.DC6V
�-l§lñi\Tlc:I.�·

62

1- 1 1
46

�íl
�
1.AC220V
2.AC110V
3.AC24V
1.DC24V 28VA 36W IP65
2.DC12V
3.DC6V
iU!i itl.li1iI l:{:i'.fi •' íl
COVNA® COVNA ®
-VALVE- -VALVE-
Solenoid Valve ZCT21 Series Solenoid Valva ZCT21 Series

-
Determine Valve Body Code
Characteristic: 1. Pilot operated pistan construction with low
power consumption
2. Seal serves longtime at steam ambient
•L-••L- -ii+i
3. Used for long-time working in pipeline 05-112" G · G/BSP PTFE
S -Stainless steel 1.AC220V 2.DC24V
10-112" N • NPT thread VITON 3.AC110V 4.DC12V
system 15-3/4" F • Flange 5.AC24V 6.DC6V
20-1"
Medium: Steam, Hot Water, Oil, etc.
EXMAPLE:ZCT 25 GBN S21B1, ZCT SERIES, NC, 15MM ORIFICE, l"G, STAINLESS STEEL BODY, NBR SEAL, COIL S21B,AC220V, DIN
Temperature: PTFE Seal:-1 O'C to 180'C

...... ..
VITON Seal:-5'C to 120't Technical Parameters
Pressure: ZCT21: O.OMpa-1.0Mpa NC
S1ze Mln Pressure Max Presuure Operating Temperature
Port Size: 3/8", 1/2", 3/4", 1"
Port Thread: BSPP, BSPT, NPT, Flange ZCT21-05 1/2" 05 0.5 0.00MPa 1.0MPa
PTFE
Orifice(mm): 5, 1 O, 15, 20, 25 ZCT21-15 1/2" 10 2.8 O.OOMPa 1.0MPa -1 O't-1 BO't

Voltage: DC-12V, 24V

ZCT21-20 3/4" 15 2.8 O.OOMPa 1.0MPa VITON
AC-24V, 120V, 240V /60Hz; 11OV, 220V /SOHz -5't-120't
ZCT21-25 1" 15 2.8 O.OOMPa 1.0MPa
Tolerance: ±10%

--
CoiIs: S21 B,20VA(AC), 18W(DC), lp65, 100%ED
Outline Size Drawing 75
Y21 B, 18VA(AC), 16W(DC), lp65, 100%ED 42.5
Material: Body - Brass or stainless steel 21
Size A

i
Seal - PET
ZCT21-05 75 16
Armature Tube - Stainless Steel304
ZCT21-12 8.2 16
Plunger - Stainless Steel 430F
Stop - SS 403F ZCT21-15 :t •• 92 19

Springs - SS 304 ZCT21-20 •• •• 92 19

Shading Rings - Stainless Steel 304
ZCT21-25 :t
80 ••40 92 19
o
Coils Parameters A B

056
1.AC220V
2.AC110V
3 AC24V
1.DC24V 18VA
IP65
2.DC12V 16W
3.DC6V
$J)Gclal vottage can
be customlzed

47.5

1.AC220V
2.AC110V I� I�
3.AC24V
24VA
1 .DC24V IP65
2.DC12V 18W
3 .DC6V
�
Speclal vohage can
be customized
 ® ®
COVNA COVNA
- VALVE - Solenoid ValveUS Series - VALVE - Solenoid Valve ZCZ11/12 Series

Characteristic: 1. Pilo! operated piston construction with

low power consumption

2. Seal serves longtime at steam ambient

3. Used far long-time working in pipeline 15, 20, 25,

32,40,50
G-G/BSP
N · NPT thread
•• -
B • Brass
S -stainless steel
i
PTFE
VITON
td\P.Ml
1.AC220V 2.DC24V
3.AC110V 4.DC12V
system
5.AC24V 6.DC6V
Medium: Steam, Hot Water, Oil, etc.

......
EXMAPLE:US 15 GBNY41H1 . US SERIES. NC. 15MM ORIFICE. l/2"G, BRASS BODY. PTFE SEAL, COIL Y42H. AC220V. DIN
Temperature: PTFE Seal:-10'C to 180'C
º
VITON Seal:-5 C to 12o·c Technical Parameters

111
Pressure: US: 0.03Mpa-1.6Mpa NC
Operat1ng
Size Min Pressure Max Presuure
Port Size: 1/2", 3/4",1", 11/.", 1'h", 2" Temperature

Port Thread: G, BSP,NPT DN15 1/2" 15 4.5 0.03MPa 1.6MPa

Orifice( mm): 12, 15, 20, 25, 32, 40, 50 º

DN20 3/4 20 9.3 0.03MPa 1.6MPa
Voltage: DC-12V, 24V, 36V PTFE
DN25 1" 25 12 0.03MPa 1.6MPa -10'C-180'C
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz

Tolerance: ±10% DN32 1-1/4" 32 24 0.03MPa 1.6MPa VITON

-5'C-120'C
Coils: Y32B, 40VA(AC), 18W(DC), lp65, 100%ED DN40 1-1/2" 40 29 0.03MPa 1.6MPa
Y42B, 50VA(AC), 20W(DC), lp65, 100%ED
DN50 2" 50 48 0.03MPa 1.6MPa
Material: Body. Brass or stainless steel

Seal - PET

-
Outline Size Drawing 68
Armature Tube - Stainless Steel304

-
Plunger - Stainless Steel 430F

-
Stop - SS 403F
82 52 146 23

-
Springs - SS 304
82 50 146 23

-
Shading Rings - Stainless Steel 304 (.)
91 55 162 29

-
Coi Is Parameters 111 75 185 37

111 75 190 37
o
163 95 223 50
A B
1.AC220V
2.AC110V DN10
..
3.AC24V
DN15 o-�
1.DC24V 40VA 18W IP65
2.DC12V DN20 !:

�J�
3.DC6V DN25 i==!��=al=,.U.

Special Voltage Can

Be Customized

1.AC220V
2.AC110V
3.AC24V
1.DC24V 50VA 20W IP65 DN32
2.DC12V
DN40
3.DC6V
DN50
Special Voltage Can
Be Customized
 ® ®
COVNA
- VALVE -
COVNA
- VALVE -
Solenoid Valve HKKB Series EX-HK523015 Series Solenoid Valve

High Pressure Piston Pilot Operated Characteristic: 1. High pressure solenoid valve with Pilot
Characteristíc: 1. High pressure solenoid valve with Pilot operated piston construction for
operated piston constructlon for
compress air machine, injecting plastic machi ne compress air machine, injecting plastic machine
2. With PARKER sea Is to improve the quality 2. With PARKER seals to improve the quality
Medium: Water, Hot Water, Compressed Air, Oil, <20CST,GAS>
Medium: Water, Hot Water, Compressed Air, Oil, <20CST,GAS>
Temperature: PFT Seal:-4o·c to 2oo·c
º
Pressure : O.OOMpa-25.0Mpa Temperature: PFT Seal:-40 C to 200'C
Port Size: 1/8", 1/4", 3/8"
Pressure: 2WH31: O.OOMpa-25.0Mpa
Port Thread: BSPP, BSPT, NPT
Orifice(mm): 1.2, 2.0, 2.5, 3.0 Port Size: 1/4", 3/8", 1/2"
Voltage: DC-12V, 24V
Port Thread: BSPP, BSPT, NPT
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz
Tolerance: ±10% Coils Outline Size Drawing Orifice(mm): 1.2, 2.0, 2.5, 3.0, 5.0, 8.0, 12.0
Coi Is: S21 B , 24VA(AC), 18W(DC), lp65, 100%ED Voltage: OC-12V, 24V
NASS COIL 0543 on request
Material: Body - Brass or SUS 304 AC-24V, 120V, 240V/60Hz; 11OV, 220V/50Hz
1�.. 1

o
Seal - PET Tolerance: ±10%
Armature Tube - Stainless Steel304
Plunger - Stainless Steel 430F Coi Is: Ex1620, 21VA(AC), 16W(DC), IP65, 100%ED
Stop - SUS 403F Material: Body - Brass or SUS 304
10
Springs - SUS 304
Seal - PET
Shading Rings · Stainless Steel 304
Armature T ube - Stainless Steel304

111 iffri
Plunger- Stainless Steel 430F
Stop· SUS 403F

l·
¡
Springs- SUS 304
¡IGtBSP S-Stainless steel [U· PU AC220V 2.DC24
NPTth,oad T-PET
-VITON PAC110V 4.DC12V
� Shading Rings - Stainless Steel 304

--
c AC24V 6.DCBV

DN15 Normally Closed with Coil

IMirllllllMil
•
Technical Parameters
Size Port s,ze Min Pressure
Min Pressure
AC(VA) :14
114· 1.2 0.03 0.01MPa 25MPa 25MPa 112· 15 2.52 0.1MPa 5.0MPa -2o·c to +55'C o·c to +90t: 2:1
DC(W):8

1/4" 2.0 0.09 0.01MPa 20MPa 20MPa - �

-
PET SS304 S21B
2.5 0.15 0.01MPa 15MPa 15MPa
DN15 Outline Size Drawing
1(4" 3.0 0.24 0.01MPa 10MPa 10MPa 84
39

Outline Size Drawing

rn 1 1
74

1 ,,,-
.iT���:
4.5º
@

J �Tu 1� -·
60
-¡
40
Size 0A o 0 11oa11086 ( E
ü 1

q] �-@
HKKB-1/8" 40 100 <O

e,
HKKB-1/4" 44 100

1
"' t,120
HKKB-3/8" 44 100 T14
1 "' �
0A �
<l>A
047,6

1
COVNA® COVNA ®
-VALVE- Solenoid Valve ZCZ11/12 Series -VALVE- Solenoid Valve ZCZ11/12 Series

-
................ .... ...... ......... ...... ... ................................ ..........

FIEi
Characteristic: 1. Pilo1 operated pisten construction
with low power consumption
NI
LJ
2. Seal serves longtime al steam ambient( t ¡

[:]
Z CZ11 15, 20,25, G · G/BSP PTFE 1.AC220V 2.DC24V
3. Used for long-time working in pipeline ZCZ12 32,40,50 VITON B
N · NPT thread 3.AC110V 4.DC12V
system 5.AC24V 6.DC6V

Medium: Steam, Hot Water, Oil, etc. EXMAPLE:US 15 GBN Y41 H1, US SE RIES, NC, 15MM ORIFICE , 1/2"G,BRASS BODY, PTFE SEAL, COIL Y42H,AC220V, DIN
Temperature: PTFE Seal:-1o·c-1eo·c
Technical Parameters
VITON seal:-s·c-12o·c

11111111111 111
ZCZ12 ,tfff NO ZCZ11 fflfíJ.I NC Operating
Pressure: 0.03Mpa-1.0Mpa Size Min Pressure Max Presuure Tempura(urn

Port Size: 1/2", 3/4",1 ", 1 %", 1 ;h", 2" DN15 1/2' 15 4.5 0.03MPa 1.0MPa

Port Thread: BSPP, BSPT, NPT, Flange DN20 3/4' 20 9.3 0.03MPa 1.0MPa
PTFE
Orifice(mm): 15, 20, 25, 32, 40, 50 DN25 1· 25 12 0.03MPa 1.0MPa -10't-180'b

Voltage: DC-12V, 24V DN32 1-1/4" 32 24 0.03MPa 1.0MPa VITON

-5'C-120'C
AC-24V, 120V, 240V/60Hz; 110V, 220V/50Hz DN40 1-1/2' 40 29 0.03MPa 1.0MPa

Tolerance: ±10% DN50 2· 50 48 0.03MPa 1.0MPa

Coils: Y218, 18VA(AC), 16W(DC), lp65, 100%ED

Material:
Y518,70VA(AC), 50W(DC), lp65, 100%ED

Body- Brass or stainless steel

�--------------------,
Outline Size Drawing

Thread Flange
Seal - PET
Armature Tube - Stainless Steel304
Plunger - Stainless Steel 430F
Stop - SS 403F
Springs - SS 304

..
Shading Rings - Stainless Steel 304·c

Coils Parameters A B
�, __
A _,

Voltage Motor Protection Outllne Slze Drawlng

Model I Picture
Power Class

150 100 095 190 065 4-.014

1.AC220V 70 60 22
DN10 120 075 4-014
2.AC110V 80 65 160 25 0105 210
3.AC24V
1.DC24V 18VA 16W IP65
DN15 100 80 170 30 120 0115 210 .085 4-014
2.DC12V DN20 140 80 210 30 135 0140 220 0100 4-018
3.DC6V DN25 140 200 43 0150 0110 4-018
Special Volt.age Can
110 155 220

--------------------- ----------------------
Be Cust.omized 140 110 205 48 165 0165 240 0125 4-018

1 AC220V
2AC110V
3AC24V
DN32
1.DC24V 70VA50W IP65 DN40
2.DC12V
3.DC6V DN50
Special Volt.age Can
Be Customized
COVNA ® COVNA ® HK5231015 Series
- VALVE - - VALVE - 2way NC/NO piloted diaphragm solenoid
Anti-corrosive Solenoid Valve HKFP21 Series

Characteristic: With isolated diaphragm construction to rot-proof Characterist: 1.Special structure reduces the transient pressure to
PTFE body for corrosion resistant prevent water hammer phenomena which will protect
Medium: Corrosive fluid and gas, Acid, Alkali, etc. the valve and pipe system
Temperature: PTFE Seal:-20 º e to 180 º C 2.Life span can be at 1 million cycles
Pressure: HKPF2: 0 .0Mpa-0.15Mpa NC 3.Low noise,stable work
Port Size: 1 /8", 1 /4", 3/8". 1/2"
4. Opened from low pressure with large flow
Port T hread: BSPP, BSPT, NPT, Flange
5.Change the piloted head, can be used with
Orifice( mm): 3,8 �-B
·�, explosion-proof coil Ex mb 1/I I T 4
Voltage: DC-12V, 24V
AC-24V, 120V, 240V/6 0Hz; 110V, 220V /50Hz Medium: LNG, LPG,Neutral gas or liquid
Tolerance: ±10% Fluid temperature: VITON:-1Q°C-15ü°C
Coils: Y 8 2B, 35VA(AC), 30W(DC), 100%ED PTFE:- 1O ºC-180'C
YD1B, 8VA(AC),8W(DC), 100%ED Ambient temperature: -1Q°C-5Q°C
Material: Body-PTFE Pressure: 0.3-2.5Mpa, 0.3-4.0Mpa,0.3-5.0Mpa
Seal- PTFE Orífice: 1/4", 3/8", 1/2", 3/4", 1"
Armature T ube -Stainless Steel304 Port size: 8mm, 1Omm, l 3mm, l 4mm,20mm,25mm
Plunger-Stainless Steel 4 30F Thread: BSPP, BSPT,NPT,UNF
Stop - SS403F DC12V DC24V
S prings - SS 304 Voltagc:
AC24,AC11OV,AC220V, AC380V 50Hz/60Hz
Shading Rings - Stainless Steel 304
Vol tage range: ±10%
Determine Valve Body Code Coil: BD-A-3, IP65, 100%ED

& 11\ii '''' Body material: Brass

��:�n
l l l l Seals: VITON, PTFE
F 1 /8" G- G/BSP SPECIFICATION
f �, 1 /4" N - N PT thread

LJ�
3/8"
1 /2" Model HK5231015B08 HK5231015B1O HK5231015B15 1-1<5231015820 HK5231015B25
'
Orífice 13rrm 13mm 13mm 25mm 25rrrn
Technical Parameters
Connection Ports 1/4" 3/8" 1 / 2" 3/4" 1"
M1n Pressure
Workíng Pressure 0 . 1-4 .0M pa
1/8" 3.0 0.1 O.OMPa 0.3MPa 0.3MPa Y82B Ambient Temp -2o·c-ss·c
MfW4M•Wf4:M MediumTemp 0-90"C
1/4" 6.0 0.28 O.OMPa 0.15MPa 0.15MPa YD1B
Kv Valve(m3/h)) 2.52 2.52 2.52 5.0 8.5
3/8" 6.0 0.28 0.0MPa 0.15MPa 0.15MPa PTFE PTFE YD1B
Power 20 20 20 20 20
112· 6.0 0.28 O.OMPa 0.15MPa 0.15MPa YD1B
Consumption
13 13 13 13 13
3/4" 6.0 0.28 O.OMPa 0.15MPa 0.15MPa YD1B
Response Frequency 2:1Hz 2:1Hz 2:1Hz 2:0.5Hz 2:0.5Hz
1" 6.0 0.28 O.OMPa 0.15MPa 0.15MPa YD1B
Voltage DC12VDC24VAC24VAC36VAC110VAC220VAC380V±10%
36

Outline Size Drawing

88
OVERALL DIMENSION
Model
HK5231015808
HK5231015B10 G3/8" 33.5 72 85 13
HK5231015B15 G1/2 33.5 72 85 13
HK5231015B20 G3/4" 60 100 120 20
HK5231015825 100 120 20
 ®
COVNA ® COVNA
- VALVE - Solenoid Valve ZCT Series
- VALVE - 3 WAV Solenoid Valve VX31 Series

Characteristic: 1. Pilot operated piston construction with low power consumption

Characteristic: 1.Direct acting miniature construction at low consumption. 2. Seal serves longtime at steam ambient
2.Compact design to save the space 3. U sed for long-time working in pipeline system
Medium: Steam, Hot Water, Oíl, etc.
3.Applied to low pressure system, open from o bar º º
Temperature: PTFE Seal:-10 C-180 C
Medium: Air, water, Steam, Oil, etc º
VITON Seal:-5 C-120'C
Temperature: NBR Seal: 14F to 176F, -10 to 80 º
NBR Seal:-5'C-80 C
EPDM Seal: 14F to 250F, -10 to 120 Pressure: 0.1 Mpa-1.6Mpa
VITON Seal: 14F to 300F, -10 to 150 Port Size: 1/2", 3/4", 1", 1 Y..", 1%", 2 ",2%",3",4",5",6",7",8"
PTF E Seal: -4F to 350F, -20 to 180 Port Thread: BSPP, BSPT, NPT, Flange
Pressure: O - 15 bar Orifice(mm): 15, 20, 25, 32, 40, 50,65,80,100,125,150,200
Port Size: 1/8 ", 1/4" Voltage: DC-12V, 24V
AC-24V, 120V, 240V/60Hz; 11OV, 220V/50Hz
Port Thread: BSPP, BSPT, NPT
Tolerance: ±10%
Orifice(mm) 1.6, 2.0, 2.5, 3.0, 3.5, 4.0
Coils: Y32B,40VA(AC), 18W(DC), lp65, 100%ED
Voltage: DC- 12v, 24V
Y428,50VA(AC),20W(DC), lp65, 100%ED

D
AC- 24V, 120V, 240V/60HZ; 110V, 220V /50HZ Material: Body - Cast Iron
Tolerance: ±10% Seal- PET
Coils: S91B, 17VA (AC), IOW (OC), IP65, 1000/oED Armature Tube - Stainless Steel304
NASS COIL 0543 on request Plunger- Stainless Steel 430F
Material: Body - Brass or stainless steel Stop- SS 403F
Springs- SS 304
Seal -VITON,NBR,EPDM
Shading Rings - Stainless Steel 304 'C
Armature Tube - Stainless Steel 304 2
Plunger - Stainless Steel 430F Determine Valve Body Code
Stop -SS430F
Springs - ss 304
Shading Rings- Stainless Steel 304

•
1 lnlet Port(HX23) 2 lnlet Port(CB23) 3 lnlet Port(CK23)
�e 2 1 1 3 3 1 1 2 3 1 1 2
Technical Parameters and Outline Size
De-energized � � �
• -
Energized �
1 1 �
l �
15
Connection

G1/2"
Working
Pressure
0.1-1.6MPa
MudiumAnd
Temperature
68
WtiOMMHMW
47 96
68 20 G3/4" 0.1-1.6MPa ;¡;.20 82 52 105
25 G1" 0.1-1.6MPa 98 63 126
32 G1 Y." 0.1-1.6MPa 117 77 143
PTFE:
40 G1%" 0.1-1.6MPa ;,,30 -10'C-180'C 131 90 160
40 Flange 4 Ports018'0110 0.1-1.6MPa 165 150 140
VITON:
50 Flange 4 Ports018*0125 0.1-1.6MPa 215 160 235
-5'C-120'C
65 Flange 4 Ports018*0145 0.1-1.6MPa 252 175 260
�35 NBR:
80 Flange 8 Ports018*0160 0.1-1.6MPa 275 195 280
-5'C-80'C
"' 100 Flange 8 Ports018*0180 0.1-1.6MPa 315 220 310
125 Flange 8 Ports018.0210 0.1-1.6MPa 410 300 390
43 36 150 Flange 8 Ports023*0240 0.1-1.6MPa �50 460 330 440
200 Flange 12 Ports023"0295 0.1-1.6MPa 480 420 540
COVNA® COVNA ®
- VALVE -
- VALVE -
Direct Acting Solenoid Valve HKW Series Direct Acting Solenoid Valve HKW Series
Characteristic: 1. Direct acting miniature construction at <l>32
low power consumption
HKW1
2. Food class body material available for Media: Water, steam, oíl etc.
RO system, washer, miller, etc. Medía TEP.: -10't-80'C
Medium: Air, Water, Steam, etc. Body: PP

Temperature: NBR Seal:-1 O°C to 80°C Pre.:0-7.0 Bar

Port: NPT 1/4"
EPDM Seal: -10°C to 80°C
Orífice: DN2.5
VITON Seal:-1 O°C to 80°C Seal: NBR. EPDM. VITON
Pressure: HKW1: O.OMpa-0.?Mpa 2.5mm HKW1 HKW2 HKW3
HKW2: O.OMpa-0.?Mpa 2.Smm
<ll32
HKW3: 0.0Mpa-0.?Mpa 2.5mm
HKW4: 0.0Mpa-0.05Mpa 10mm
HKW2
Medía: Water, steam, oíl etc.
HKW5: 0.0Mpa-0.05Mpa 10mm
Medía TEP.: -1o'C-ao't
HKWS6: 0.0Mpa-0.05Mpa 5mm Body: POM
HKWS11: O.OMpa-0.?Mpa 2.5mm Pre.:O - 7 .O Bar
Port Size: See the data below Port: PE pipe with C!>6.35mm outer día.
Orífice: DN2.5
Port Thread: BSPP, BSPT, NPT
Seal: NBR. EPDM. VITON
Voltage: DC-12V, 24V 54
HKW4 HKW5
AC-24V, 120V, 240V/60Hz;110V, 220V/50Hz
Tolerance: ±10%
Coils: AB12B, 6VA(AC), 6W(DC), lp65, 100%ED
.:J -,
SA11B, 9VA(AC), 8W(DC), lp65, 100%ED HKW3
SA128, 9VA(AC), 8W(DC), lp65, 100%ED Medía: Water. steam. oíl etc.
Medía TEP.: -10'C-80'C
Material: Body- Brass

�,·�.
�
Body: POM
Sea! - BSPP, BSPT, NPT, Silicon Rubber Pre.:O - 7 .O Bar
Plunger - Stainless Steel 430F
� '- r ,,1 Port: G1/8"
Stop - SS403F Orífice: DN2.3

Springs - SS 304
HKWS11 HKWS6 50 ªº -, Seal: NBR, EPDM, VITON

31
22.5
HKWS6 HKW4
Medía: Water. steam, oíl etc.
Medía: Water, aír, oíl etc.
Medía TEP.: -10'C-100't
Media TEP.: -10'C-100'C
Body: PP
Body: POM
Pre.:O - 0.5 Bar
Pre.:0- 0.5 Bar
Port: G1/4" wíth <l>12.5mm outer dia.
Port: C!>8.4mm outer dia.
Orífice: DN10
Orífice: ON5.0
Seal: Silica Gel
5849-- Seal: Sílícon rubber

HKWS11 HKW5
Media: Water, steam, oíl, hot water etc. Medía: Water, steam, oíl etc.
Medía TEP.: -1O't-80'C Media TEP.: -10'C-100'C
N Body: PP
Body: PP 00 ti)
4--1111--.f.J-.1..-ll--ll-ll--+--l--l-- c:i Pre.:O - 0.5 Bar
Pre.:0-7.0 Bar
Port: NPT 114· Port: G1/4" wíth C!>12.5mm outer día.
Orífice: ON2.5 Orífice: DN10
51
40 Seal: NBR. EPDM. VITON Seal: Sílica Gel
COVNA ® COVNA®
- VALVE - - VALVE -
Small Home Appliances Valve 55:XX Series Small Home Appliances Valve 55:XX Series

Characteristic: 1. Direct acting miniature construction at low 5523

power consumption Media: Water, air, oil, hot water etc.
22
Media TEP.: -10"C-150'C
2. With TUV certificate for household appliance use Body: Brass
like coffee machine, electrical iron, steam clearner Pre.:0-10.0 Bar
Port: lnlet: R1 /8" or NPT1/8"
3. Applíed to low pressure system, open from O bar Outlet: <l>6. 2 mm outer dia.
Medium: Air, Water, Steam, Oil, etc. Orífice:DN2.3
5503-1 5503-2 Seal: VITON
Temperature: VITON Seal:-1O°C to 150°C
Pressure: 55 series: O.OMpa-2.0Mpa
Port Size: 1/8" and other
Port Thread: BSPP, BSPT, NPT
5524-03
Orifice(mm): 1.0, 1.2, 1.6, 2.0, 2.6, 2.8 Media: Water, air, oil, hot water etc.
Voltage: DC-12V, 24V Media TEP.: -10'C-150't
Body: Brass
AC-24V, 120V, 240V/60Hz;110V, 220V/50Hz Pre.:0-10.0Bar
5523 5524-3
Tolerance: ±10% Port: lnlet: G1/8" or NPT1/8"
Outlet: <l>7.5mm outer dia.
CoiIs: SA11B, 9VA(AC), 8W(DC), lp65, 100%ED Orífice:DN2.3
Material: Body- Brass 49.5 Seal: VITON

Seal - VITON
Plunger - Stainless Steel 430F
Stop - SS403F
5531-03

-
Springs - SS 304 Media: Gas etc.
5531-3 5531-4 Media TEP.: -10"C-150't
Determine Valve Body Code Body: Brass

11!' 11 IIIUH •1 __J•L-_Jffhi

Pre.:0-6.0 Bar
Port: G1/8" or NPT1/8"
Orífice:DN2.8
l l Adjustableorifice:DN0.75, 1.0, 1 .35
5503,5515 10-1.0 20- 2.0 1 - 1/8 G - G/BSP Seal: VITON
1.AC220V 2.DC24V
5523,5524 12 -1.2 26-2.6 2 - 1/4' N - NPT thread
3.AC110V 4. D C12V
5525,5531 16-1.6 28-2.8 3-318'
4- 1/ 2' 5.AC24V 6.DC6V

40
5531-04
5503-01 NC Media: Gas etc.
Media TEP.: -10"C-150'C
Media: Water, air, oíl, hot water etc.
Body: Brass
Media TEP.: -10't-150't
l() Pre.:0-6.0 Bar
U'Í Body: Brass
..,. Port: G1/8" or NPT1/8"
Pre . :0-1 O.O Bar
Orífice:DN2.0
Port: G1/8" or NPT1/8"
Seal: VITON
Orífice:DN2.0 61.5
Seal: VITON

5503-02
Media: Water, air, oíl, hot water etc.
Media TEP.: -10't-150't
Body: Brass
Pre.:0-6.0 Bar
Port: G1/8" or NPT1/8"
Orífice: DN2.0, 2.8
Seal: VITON
COVNA
- VALVE -
®
COVNA ®
- VALVE -
Small Home Appliances Valve 5515-XX Series Small Home Appliances Valve 5515-XX Series

Characteristic: 1. Direct acting miniature construction at low

5515-05
power consumption Media: Water, air, o,I, hot water etc.

2. With TUV certificate for household appliance use Medra TEP.:-10"C-150'C

Body:B,ass
like coffee machine, electrical iron, steam clearner Pre.:0-20.0 Bar
Port: Flange bracket
3. Applied to low pressure system, open from O bar Orífice: ON1.0.1.5, 2.0
Seal:VITON
Medium: Air, Water, Steam, Oil, etc.
5515-02 5515-03 5515-04
Temperature: VITON Seal:-1 o'C to 1 SO'C
Pressure: 55 series: O.OMpa-2.0Mpa �o
5515-06
Port Size: 1/8" and other Media: \IVater, air, otl. hot water etc.
Port Thread: BSPP, BSPT, NPT Media TEP.; ·10'C-150'C
Body:Brass
Orifice(mm): 1.0, 1.2, 1.6, 2.0, 2.6, 2.8 Pre.:0-20.0 Bar
Port: G1/8" or NPT118"
Voltage: DC-12V, 24V Onfice: ON2.0
AC-24V, 120V, 240V/60Hz;110V, 220V/50Hz Seal:VITON
5515-05 5515-06 5515-07
Tolerance: ±10%
CoiIs: SA11B, 9VA(AC), 8W(DC), lp65, 100%ED
Material: Body- Brass 5515-07 3Way
Media: Water, air, o,I, hot water etc.
Seal - Silicon Rubber Media TEP.:-1O'C-150'C
Body: Brass
Plunger- Stainless Steel 430F Pre.:0-20.0 Bar

Stop - SS403F Port; Body: G1/8" or NPT118'

Top: <1>7 .0mm ovter día.
Springs - SS 304 Orifice:DN1 0.1.2.1.s

5515-08 5515-09 5515-10 Seal:VITON

$7.0
5515-02 2Way NO 5515-08
Media: Water, air, oil, hot water etc. Media; Water. steam, hot water etc.
Media TEP.: -10'C-150'C Media TEP.: -10't-150'C

:.!
Body: Brass Body:Brass
Pre.:0-20.0Bar Pre.:0-20 O Bar
Port:BO<ty: PTFE pipe with or <1>4.0mm outer dia. Port: G1/8" or NPT118"
_J18.8±0.1
Top: <1>7 .Omm ovter día. Orífice: ON1.0, 1.5. 2.0. 2.6
2·M3
Orlfice:DN1.5 Seal:VI TON
Seal:VITON
<1>7.5

5515-09
5515-03 Combination valve
Media: Water. air, oíl, hot water etc. Media: Wate<. air. ofL, hot water etc.
Media TEP.: -10'C-1so'C Medra TEP.: 10'C-150'C
0

Body: Brass Body:Brass

Pre.:0-10.0Bar Pre.:0-15.0 Bar
Port: Gl/8" or NPTl/8" Port: lnlel & body: G1/8"or NPT1/8"
Orifico: DN2.5 Top: <1>7.Omm outer dia.
Seal:VITON Orifice:ON1 O
Seal:VITON

5515-04 3Way 5515-10

Media: Water, air, oiJ, hot water etc. Mectía: Water, air, 011, hot water etc.
Media TEP.: -10'C-150'C ModíaTEP.:-10'C-150'C
Body: Brass -
Body: Brass
Pre.:0-20.0Bar 2-M3 �
18.5±0.1 Pre.:0-0.05 Bar
-- 18.8±0.1
Port: Flange bracket Port: G1/8" or NPTl/8"
Orifice: ON1.0, 1.5, 2.0 Onfice: ON6.0
Seal:VITON Seal:VITON
29.5
COVNA ® COVNA ®
- VALVE - - VALVE - Solenoid Valve lnstallation lnstruction

Safety instructions before starting

1. Check the compatibility of the medium used, temperature and other operating conditions with the materia Is and specifications
16 11 1
of the product. lt is the responsibility of the user to select the right product far the application.
2. Solenoid valves can only be used with clean liquids or gases. lt is recommended to install a filler befare the solenoid valve.

: 3. Never exceed the limits for pressure, temperature or voltage as indicated on the product and/or in the technical documentation.
G1/8' or Gl/4 4. The temperature of a sotenoid valve coil can rise during operation; this is normal. Overheating will cause smoke and a burning

Ml. .
smell. In this case, the power supply must immediately be disconnected.
.
¡(�;
.
,:: ,..... A lt is recommended to install the solenoid in vertical position with the coil
2·
�·= 3
· · ·· ·
·
41
facing upwards. This reduces the probability of the collection of debris in • �

EH49ii!füHii 0° the solenoid valve.

Model 2P025-06 1 2P025-08 lnstallation lnstruction

Working Medium Aír,Water,011,gas
Motion Pattem Direct Orive Type 1. The solenoid valve can be used in combination with clean liquids or gases. Make sure that the pipe may contain dirt befare
Type Normal Close Type installing the valve. lt is recommended to install a filter (500 µm) before the solenoid valve.
Aperture of Flow Rate(mm) 25
CV Value
2. Be aware of the direction of flow of the medium when installing the valve. Solenoid valves with an arrow on the housing must
023
Port Size G1/8" G1/4" be connected in the indicated direction. The pipes on both sides of the valve must be securely fastened. Use a wrench for
Operallon Fluid Viscosity 20 CST (Below)
both valve and pipe while tightening to preven! unnecessary stresses in lhe system. The solenoid valve musl be fixed via the
Work,ng-pressure 0-0.7MPa
Max. Pressure Resistance 1.0MPa provided connection points. Only exert force at the designated areas on the body such as the hexagon; never to the coil or
Operating Temperatura Ranga ·S-•80C armature. Avoid vibration in the pipes. Use a suitable sealant for threaded connections of the solenoid valve. Avoid the entry
Voltage Range ±10%
Material or Body Eng1neenng Plastic Steel of thread sealing material in the valve, this can lead to malfunctioning of the valve.
Material of Oil Seal NBR EPOM or VITON
Common faults and inspection, troubleshooting

Problem Solution

1. Check electrical supply with voltmeter. Voltage must agree with nameplate rating.

Valve fails to operate 2. Check coil with ohmmeter for shorted or opened coi!.

3. Make sure that pressure complies with nameplate rating.

1. Disassemble valve; clean out extraneous matter. The plunger must be free to move
without binding.
Graphic Symbol The valve is sluggish or
A inoperative - electrical supply 2. lf a diaphragm design, check the diaphragm for tears and/or ctogged or obstructed bleed
rz=[[CJ " and pressure check out hole or pilot orífice. Torn diaphragm must be replaced.

3. Check ali springs. lf broken, replace.

ftMMiiHel •º1 Externa! leakage at sleeve Check that the sleeve and/or cover screws are torqued to specifications. lf leakage persists,
Model 2W025-06 1 2W025-08 2W040-10 1
2WH012-06 1 2WH012-08 2WH020-10 flange or joint between body replacement of diaphragm assembly or flange 0-ring may be required andfor bodies or
covers with damaged sealing surfaces may have to be replaced.
Workmg Med1um Alr,Water,011,Gas and cover
Mot,on Pattern Olreci Onve Type
Type Normal Close Type Externa! leakage at speed
Check 0-rings for damage and replace if necessary.
Aperture or Flow Rale(mm¡_ _ _ _
__ _ 2.5 4 12 2 control device
CV Value 0.23 0.60 o.os 0.15
Port Size G118" G11.ol" G3/8" Gl/8" G114" G318' 1. Disassemble valve, remove extraneous matter, and clean parts in a mild soap and water
Operation Fluid Viscosity 20 CST (Below) solutíon.
Work1ng-pressure ------- -A1r.Water,Oíl,Gas:O-O
-� 7MPa A.Jr,Wator,O,t0-2.0MPa
- -
- --� Interna! leakage 2. Examine diaphragm sealing surface for dirt. Remove ali foreign particles. Examine orífice
Max. Pressure Res,stance 10 3.5
for nicks. Damaged parts must be repaired or replaced.
Dperatíng Temperature Range ---� -5--+BOC ---�
Voltage Range ±10% 3. Check plunger return spring. Replace if broken.
Material of Body Brass
Material of 011 Seal NBR EPDM or VITON Chatter or buzz sound 1. Remove power from the coil.
when energized 2. lnspect the plunger and sleeve forexcessive wear or contaminalion.