S19314SBFW, S19314BF, S19314TT

Combination Drench Shower and Halo™ Eye/Face Wash with Stainless Steel Bowl
• Halo™ and SpinTec™ Deliver the Most Effective Shower and Eye/Face Washdown
Coverage and Spray Pattern
• Exceeds ANSI/ISEA Z358.1 Specifications
®
• Industry's Only Self-Draining Design – The Aquaduct™
• Separate Supply and Waste Pipes – Meets CEN and Plumbing Requirements
• Ergonomic Hand Activation Eyewash Paddle – Easy to Reach from Any Direction
• Fully-Assembled and Factory-Tested Eye/Face Wash with Hinged Dust Covers
• Barrier Free Options Are Available (S19314BF)
• Universal Identification Sign and Inspection Tag Included
• Classified by Underwriters Laboratories Inc. to ANSI/ISEA Z358.1.
• SpinTec showerheads are covered by one or more of the following patents: 8,113,446;
7,806,348; 8,490,895; D594,089; D669,555; Reg. Comm. Des. D001079560-0001.
Other patents pending.
• Halo is Covered by One or More of the Following Patents: 9,700,484; 9,314,398;
D662220; D673298; D662605; D685920; D662219; and D671228. Other Patents
Pending. Eye/Face Wash
The Halo eye/face wash system offers a high performance rinsing platform that provides
Specifications rapid relief to an individual’s eyes and face that have been injured by chemicals or
particulate. This system provides the most complete face wash available in the market.
Standard and Barrier-Free Combination Drench Shower Eye/Face Wash Units save
The eye/face wash includes an integral 5.1 GPM (19.2 L) flow control, providing water
space and fit easily into any work environment. Shower valve operates quickly by a
at a safe velocity while maintaining its effectiveness (exceeds minimum water flow of
pull rod with a triangular handle. Shower provides a superior washdown with a more
3.0 GPM (11.4 L) at 30 PSI (2.0 bar)). The eye/face wash is protected by flip open dust
even spray pattern. Halo eye/face wash, operated by an ergonomic, highly visible push
covers that open when the product is activated by type 304 stainless steel push handle.
handle, provides effective wash down coverage and spray pattern. Integral strainer
Safe, steady water flow under varying water supply conditions from 30–90 PSI (2.0-6.1
reduces debris in the water and also prevents clogging.
bar) is assured by integral flow control in the sprayhead assembly. Sprayheads are made

This plumbing fixture is not intended to dispense water for human from an impact resistant ABS plastic.
consumption through drinking or for preparation of food or beverages. Bowl
Bowl is constructed of Type 304 corrosion-resistant stainless steel.
Pipe and Fittings
Piping to 1-1/4" NPT water supply inlet on unit. Piping to 1-1/4" NPT drain outlet. For information on all available S19314 models, please see tech data
1-1/4" piping assembly manufactured of one of the following materials: document Bradley_SafetyCombi_S19314Series.
• Galvanized steel with BradTect® safety yellow coating
Ball Valve Model Description
1" shower ball valve and ½" stay-open eye/face wash valve manufactured of the following Halo eye/face wash, plastic showerhead, stainless steel
 S19314SBFW
materials and supplied with type 304 stainless steel pull rod and handle: bowl
• Chrome-plated brass Halo eye/face wash, plastic showerhead w/ stainless
 S19314TT
SpinTec™ Showerhead steel shroud & bowl
Standard showerhead is 3.1" (78.7mm) diameter highly visible yellow impact-resistant Halo eye/face wash, barrier-free, plastic showerhead,
 S19314BF
plastic. 10¾" (273mm) diameter corrosion-resistant stainless steel shroud (S19314TT). stainless steel bowl
SpinTec drench showerhead features integral 22 GPM (83.3 L) flow control (exceeds
minimum water flow of 20 GPM (75.7L) at 30 PSI (2.0 bar)), conserving water and
helping to accurately size your tepid water system. Tepid Water Options
SpinTec Flow Rate vs Inlet Pressure at Fixture Navigator S19-2150 EFX20 Keltech SNA-Series
Emergency Themostatic Mixing Valve Tankless Water Heater
40

35

30
Flow Rate (gpm)

25

20

15

10

0
10 20 30 40 50 60 70 80 90
Inlet pressure at Fixture (psig)

Satisfies ANSI/ISEA Z358.1 tepid water requirements.

© 2018 Bradley
Page 1 of 2 10/22/2018 P.O. Box 309, Menomonee Falls, WI 53052-0309
This information is subject to change without notice. 800 BRADLEY (800 272 3539) +1 262 251 6000
Bradley_SafetyCombi_S19314SBFW_BF_TT bradleycorp.com
 S19314SBFW, S19314BF, S19314TT
Combination Drench Shower and Halo™ Eye/Face Wash with Stainless Steel Bowl

S19314 shown with Stainless Steel Bowl

Drawing depicts Eyewash. Eye/Face Wash dimensions are the same.

2613⁄16"
(681mm)

Plastic Showerhead with

Stainless Steel Shroud
Ø 3.1"
(78.7mm) 923⁄16"
(2342mm)
to bottom
of base

Stainless Steel Ø 10¾" (273mm)

Optional
barrier free
pull rod
Eye/Face Wash Bowl
861⁄8"
(2188mm) 18½"
to bottom (470mm)
of base
47" 941⁄8"
(1193mm) to (2391mm)
62¼" 13"
bottom of base to bottom
(1581mm) (330mm)
for barrier free of base
to bottom
option of base

677⁄8"
(1724mm)
to bottom
of base

34¾"
(883mm)
to Bottom
of Base
6"
Standard (152mm)
drain
outlet

All dimensions assume standard thread engagement. Variations in manufacturing allow for +/- 1
⁄8"(3mm) per threaded joint. To find
the tolerance of a dimension, add the number of thread joints across the length of the dimension and multiply it by 1⁄8" (3mm).

© 2018 Bradley
Page 2 of 2 10/22/2018 P.O. Box 309, Menomonee Falls, WI 53052-0309
This information is subject to change without notice. 800 BRADLEY (800 272 3539) +1 262 251 6000
Bradley_SafetyCombi_S19314SBFW_BF_TT bradleycorp.com