Instructions:

This Trainees’ Record Book (TRB) is intended to serve as

record of all accomplishment/task/activities while undergoing
training in the industry. It will eventually become evidence that
can be submitted for portfolio assessment and for whatever
purpose it will serve you. It is therefore important that all its
Offshore-Onshore Institute of Technology
contents are viably entered by both the trainees and instructor.
TESDA-Accredited School
Maharlika Highway Brgy. Polo Mauban Quezon
TRAINING AND ASSESSMENT CENTER The Trainees’ Record Book contains all the required
competencies in your chosen qualification. All you have to do is to
TRAINEE’S RECORD BOOK fill in the column “Task Required” and “Date Accomplished” with
all the activities in accordance with the training program and to be
taken up in the school and with the guidance of the instructor.
The instructor will likewise indicate his/her remarks on the
PICTURE “Instructors Remarks” column regarding the outcome of the task
accomplished by the trainees. Be sure that the trainee will
personally accomplish the task and confirmed by the instructor.

It is of great importance that the content should be written

legibly on ink. Avoid any corrections or erasures and maintain the
cleanliness of this record.

This will be collected by your trainer and submit the same

to the Training Management Unit Head (TMU) and shall form part
Trainee’s No. ________________________ of the permanent trainee’s document on file.

THANK YOU
NAME:
ELECTRICAL INSTALLATION AND
QUALIFICATION:
MAINTENANCE NC II
TRAINING DURATION: 196 HOURS

TRAINER:
NOTES: TRAINEE’S INFORMATION SHEET

- Personal Data:
___________________________________________________________
___________________________________________________________
Name:____________________________________________________
___________________________________________________________ Last Name First Name Middle Name
___________________________________________________________
Phone Number:_______________ Date of Birth: _________________
___________________________________________________________
Age: ________ Status: __________ Citizenship: __________________
___________________________________________________________ Height: _________ Weight: _________Place of Birth: ______________
___________________________________________________________ Email Address: _____________________________________________
___________________________________________________________
Religion: __________________________________________________

___________________________________________________________
___________________________________________________________ Family Data:
Father’s Name: __________________Occupation: _______________
Mother’s Name: _________________ Occupation: _______________
Parent’s Address: __________________________________________
Telephone / Mobile Phone Number: ___________________________
Present Guardian: _________________Relationship: _____________
Telephone / Mobile Phone Number: ___________________________

In Case of Emergency, please contact:

Name: _____________________ Relationship: ____________________
Telephone / Mobile Number: __________________________________
Address: ___________________________________________________

___________________________
SIGNATURE
 BASIC COMPETENCIES
Unit of Competency 1: PARTICIPATING IN WORKPLACE
COMMUNICATION Unit of Competency 2: WORKING IN A TEAM ENVIRONMENT

NC Level II NC Level II
Learning Task/ Activity Date Instructors Learning Task/ Activity Date Instructors
Outcome Required Accomplished Remarks Outcome Required Accomplished Remarks
LO1. Describe
LO1. Obtain and
and identify team
convey workplace
information role and
responsibility in a
LO2. Complete team
relavant work LO2. Describe
related documents work as a team
LO3. Participate in
workplace meeting
and discussion __________________ _____________________________
Trainee’s Signature Trainer’s Signature

__________________ _____________________________
Trainee’s Signature Trainer’s Signature
 Unit of Competency 4: PRACTICE OCCUPATIONAL HEALTH AND
Unit of Competency 3: PRACTICING CAREER PROFESSIONALISM
SAFETY
NC Level II
NC Level II
Learning Task/ Activity Date Instructors
Learning Task/ Activity Date Instructors
Outcome Required Accomplished Remarks
Outcome Required Accomplished Remarks
LO1. Integrate
LO1. Identifying
personal
hazard and risk
objectives with LO2. Evaluate
organizational hazard and risk
goals. LO3. Control
LO2. Set and hazards and risk
meet work
priorities. LO4. Maintain
LO3. Maintain occupational
professional health and safety
growth and awareness
development.

__________________ ____________________________
__________________ _____________________________
Trainee’s Signature Trainer’s Signature
Trainee’s Signature Trainer’s Signature
 COMMON COMPETENCIES
Unit of Competency 1: USING HANDS TOOLS
Unit of Competency 2: PERFORMING MENSURATIONS AND
CALCULATION
NC Level II
Learning Task/ Activity Date Instructors
NC Level II
Outcome Required Accomplished Remarks
Learning Outcome Task/ Activity Date Instructors
LO1. Plan and
Required Accomplished Remarks
prepare for tasks
to be undertaken. LO1. Select
measuring
LO2. Prepare instruments.
hand tools. LO2. Carry-out
measurements and
LO3. Use calculations.
appropriate hand LO3. Maintain
tools and test measuring
equipment. instruments
LO4. Maintain
hand tools.

__________________ ____________________________
Trainee’s Signature Trainer’s Signature
__________________ _____________________________
Trainee’s Signature Trainer’s Signature
Unit of Competency 3: PREPARING AND INTERPRETING TECHNICAL Unit of Competency 4: APPLYING QUALITY STANDARDS
DRAWING
NC Level II
NC Level II Learning Outcome Task/ Activity Date Instructors
Learning Task/ Activity Date Instructors Required Accomplished Remarks
Outcome Required Accomplished Remarks LO1. Assess quality
LO1. Identify of received
different kinds of materials.
technical drawings. LO2. Assess own
LO2. Interpret work.
technical drawing. LO3. Engage in
LO3. Prepare/make quality
changes to improvement.
electrical/ electronic
schematics and
drawings.
LO4. Store
technical drawings
_______________________ ________________________
and equipment/
Trainee’s Signature Trainer’s Signature
instruments.

__________________ _____________________________
Trainee’s Signature Trainer’s Signature
 CORE COMPETENCIES
Unit of Competency 5: TERMINATING AND CONNECTING
Unit of Competency 1: PERFORMING ROUGH-IN, WIRING AND
ELECTRICAL WIRING AND ELECTRONIC CIRCUIT
CABLING WORKS FOR SINGLE-PHASE DISTRIBUTION, POWER,
LIGHTING AND AUXILIARY SYSTEM
NC Level II
Learning Outcome Task/ Activity Date Instructors NC Level II
Required Accomplished Remarks
Learning Outcome Task/ Date Instructors
LO1. Plan and Activity Accomplished Remarks
prepare for
Required
termination/connection
of electrical wiring/ LO1. Install
electronics circuits. electrical metallic/
LO2. Terminate/ non-metallic (PVC
connect electrical conduit).
wiring/ electronic LO2. Install wire
circuits. ways and cable tray.
LO3. Test termination/ LO3. Install auxiliary
connections of terminate cabinet
electrical wiring/ and distribution
electronics circuits. panel.
LO4. Prepare for
cable pulling and
installation.
LO5. Perform wiring
_______________________ ________________________ and cabling lay out.
Trainee’s Signature Trainer’s Signature
LO6. Notify
completion of work.

_______________________ ________________________
Trainee’s Signature Trainer’s Signature
 Unit of Competency 3: INSTALL DEVICES OF FLOOR AND WALL
MOUNTED OUTLETS, LIGHTING FIXTURES/SWITCHES AND
Unit of Competency 2: INSTALLING ELECTRICAL PROTECTIVE AUXILIARY OUTLETS
DEVICES FOR DISTRIBUTION, POWER, LIGHTING, AUXILIARY,
LIGHTNING PROTECTION AND GROUNDING SYSTEMS NC Level II
Learning Outcome Task/ Activity Date Instructors
NC Level II Required Accomplished Remarks
Learning Task/ Activity Date Instructors LO1. Select wiring
Outcome Required Accomplished Remarks devices.
LO1. Plan and LO2. Install wiring
prepare work. devices
LO2. Install LO3. Install lighting
electrical protective fixtures/switches.
devices. LO4. Notify
LO3. Install lighting completion of work.
fixture and auxiliary
outlet.
LO4. Notify _______________________ ________________________
completion of work. Trainee’s Signature Trainer’s Signature

_______________________ ________________________ INSTITUTIONAL ASSESSMENT

Trainee’s Signature Trainer’s Signature
A. WRITTEN TEST / COMPUTER TEST
Date
Score
A. WRITTEN TEST / COMPUTER TEST
Date
Result

_______________________________ ____________________________
Trainee’s Signature Trainer’s Signature