APPLICATION

PHONIC CORPORATION POWERPOD 745 / 865 / 885 User's Manual page 13

DIGITAL EFFECT TABLES
POWERPOD 745 PLUS

Program Name Program Description Type

VOCAL 1 Ideal for vocals Echo + Reverb
VOCAL 2 Ideal for vocals Echo + Reverb
VOCAL 3 Ideal for vocals Echo + Reverb
ECHO 1 Ideal for Echoing vocals Echo
ECHO 2 Ideal for Echoing vocals Echo
DELAY Delays the audio signal Delay
S. HALL This reverb simulates a moderately size hall Reverb
M. HALL This reverb simulates a medium sized setting Reverb
L. HALL This reverb simulates a large, expanse setting, such as a concert hall Reverb
CATH Creates acoustics similar to those of a Cathedral. Reverb
ROOM 1 Creates acoustics similar to those of a small room Reverb
ROOM 2 Creates acoustics similar to those of a small room Reverb
PLATE 1 Simulates a small plate reverb device, creating hard sounding Reverb
Reverberation
PLATE 2 Simulates a medium plate reverb device, creating hard sounding Reverb
Reverberation
GATE REVERB Produces effect by cutting the reverberation Reverb
FLANGE Adds a sense of pitch to the sound Flange + Reverb

POWERPOD 865 / 885 PLUS

Program Name Program Description Controllable Parameter
Parameter Variable Range
HALL This reverb simulates a large, expanse setting, such Reverb Time 0.3 – 10.0 sec
as a concert hall
ROOM Creates acoustics similar to those of a small room Reverb Time 0.3 – 3.2 sec
PLATE Simulates a Plate Reverb device, creating hard Reverb Time 0.3 – 10.0 sec
sounding Reverberation
REVERB VOCAL 1 Ideal for Reverb of vocals Reverb Time 0.3 – 10.0 sec
REVERB VOCAL 2 Ideal for Reverb of vocals Reverb Time 0.3 – 10.0 sec
ECHO 1 Ideal for Echoing vocals Delay Time 0 – 800 ms
ECHO 2 Ideal for Echoing vocals Delay Time 0 – 800 ms
DELAY 1 Delays the audio signal Delay Time 0 – 800 ms
DELAY 2 Delays the audio signal Delay Time 0 – 800 ms
EARLY REF. Modifies early reflections, creating a deeper sound or Room Size 0.1 – 10.0
an echo-like effect
GATE REVERB Produces effect by cutting the reverberation Room Size 0.1 – 5.0
DOUBLER Creates an effect simulating 2 vocalists Pitch Fine 0 – 50
SYMPHONIC Adds richly layered depth to the sound Depth 0 – 100%
FLANGE Adds a sense of pitch to the sound Modulation 0.05 – 4.00 Hz
Frequency
DISTORTION Used to distort the sound Drive 0 – 100%
TAP DELAY Allows you to select the delay time by clicking a Feedback Gain 0 – 99%
button twice or by use of a footswitch. The amount
of feedback is adjusted using the PARAMETER 100 ms(600bpm) –
Delay Time
control. 2690 ms(22.3bpm)

page 14 POWERPOD 745 / 865 / 885 User's Manual PHONIC

 DIMENSIONS

Measurements are shown in mm/inch

PHONIC CORPORATION POWERPOD 745 / 865 / 885 User's Manual page 15

SPECIFICATIONS
POWERPOD 745 Plus POWERPOD 865 Plus POWERPOD 885 Plus
POWER AMP, output power in
watts @THD<0.5%, 1KHz

Number of Power channels 2 2 2

Limiter 2 2 2
8 ohms per channel 145 195 260
4 ohms per channel 220 300 400
8 ohms bridge mono 440 600 800
Inputs
Lo-Z / Hi-Z channels 4, 2 with super Hi-Z 6, 2 with super Hi-Z 6, 2 with super Hi-Z
(470K ohms) (470K ohms) (470K ohms)
Mic/ Line-Level channels 3 2 2
2T input 1x Mini Stereo & 2x RCA 1x Mini Stereo & 2x RCA 1x Mini Stereo & 2x RCA
Aux returns 1 x 1/4” TS, Unbal. 2 x 1/4” TS (Stereo), Unbal. 2 x 1/4” TS (Stereo), Unbal.
Outputs
Main out 1x 1/4” TS, Unbal. 2 x 1/4” TS (Stereo), Unbal. 2 x 1/4” TS (Stereo), Unbal.
Monitor out 1 x 1/4” TS, Unbal. 1 x 1/4” TS, Unbal. 1 x 1/4” TS, Unbal.
Efx send 1 x 1/4” TS, Unbal. 1 x 1/4” TS, Unbal. 1 x 1/4” TS, Unbal.
Rec out 2 x RCA & Mini-Stereo 2 x RCA & Mini-Stereo 2 x RCA & Mini-Stereo
Speaker outputs 2 x speakon & 5 x 1/4” TS 2 x speakon & 5 x 1/4” TS 2 x speakon & 5 x 1/4” TS
Channel Strips 7 8 8
Monitor / Effect send controls 2 2 2
Pan/Balance control N/A Y Y
Volume Controls Rotary Rotary Rotary
Pad in/out CH 1~4 CH 1~6 CH 1~6
Master Section
Aux returns 1, Mono 1, Stereo 1, Stereo
Effects Return to Monitor Yes Yes Yes
Faders Monitor, Main (Rotary) Monitor, Main L/R (Rotary) Monitor, Main L/R (Rotary)
Metering
Number of channels 2 3 3
Segments 5 5 5
Phantom Power Supply +48 VDC +48 VDC +48 VDC
Switches Global Global Global
Digital Effect Processor 16 preset programs (24-bit) 16 effects with one main 16 effects with one main
with foot switch (effect on/off) parameter control, tap delay parameter control, tap delay
control, foot switch control, foot switch
(effect on/off, tap) (effect on/off, tap)
Graphic EQ w/ feedback detect 2 x 7-band (assignable to ST+1 (assignable to main L/ ST+1 (assignable to main L/
system main 1/2 or main/monitor) R or main/monitor), 7-band R or main/monitor), 7-band

Center Frequency 60, 120, 360, 1K, 2.5K, 7K, 60, 120, 360, 1K, 2.5K, 7K, 60, 120, 360, 1K, 2.5K, 7K,
16K Hz 16K Hz 16K Hz
Range ±12 dB ±12 dB ±12 dB
Vocal Eliminator Yes Yes Yes
Speaker Enhancement System Yes Yes Yes
Noise: 20Hz to 20KHz
bandwidth, IHF-A weighted,
line inputs to main L/R outputs,
all channels assigned, panned
L/R
Master output, all fader down <-78 dBu <-78 dBu <-78 dBu
Power amp output, all fader down <-63 dBu <-63 dBu <-63 dBu

page 16 POWERPOD 745 / 865 / 885 User's Manual PHONIC

 THD
Power output, 1KHz, 20Hz to @110 watts, 4 ohms <0.5% @150 watts, 4 ohms <0.5% @200 watts, 4 ohms <0.5%
20KHz
Any output, 1KHz @ +14dBu, <0.3% <0.3% <0.3%
20Hz to 20KHz, channel inputs

CMRR (1 KHz @ -60dBu, Gain at 80 dB 80 dB 80 dB

maximum)
Crosstalk (1KHz @ 0dBu, 20Hz
to 20KHz bandwidth, channel
in to main L/R outputs)
Channel fader down, other <-63 dB <-63 dB <-63 dB
channels at unity
Channel muted, other channels <-64 dB <-64 dB <-64 dB
at unity
Frequency Response
(Mic input to output)
20Hz ~ 20KHz, line level o/p @ +0/-2 dB +0/-2 dB +0/-2 dB
+4dBu into 600 ohms

20Hz ~ 20KHz, power amp o/p 1 +0/-2 dB +0/-2 dB +0/-2 dB

watt into 8 ohms

Maximum Level
Mic preamp input +10 dBu +10 dBu +10 dBu
All other inputs +22 dBu +22 dBu +22 dBu
Unbalanced output +22 dBu +22 dBu +22 dBu
Impedance
Lo-Z input (Mic in) 2.2K ohms 2.2K ohms 2.2K ohms
Hi-Z input (Line in) 5K ohms 5K ohms 5K ohms
Super Hi-Z (Line in) 470K ohms 470K ohms 470K ohms
All other input >10K ohms >10K ohms >10K ohms
RCA 2T output 1.2K ohms 1.2K ohms 1.2K ohms
All other outputs 560 ohms 560 ohms 560 ohms
Equalization 3-band, ±15 dB 3-band, ±15 dB 3-band, ±15 dB
Low EQ 80 Hz 80 Hz 80 Hz
Mid EQ on channel 1 & 2 100-8K Hz sweepable 100-8K Hz sweepable 100-8K Hz sweepable
Mid EQ on channel 3 and above 2.5 kHz 2.5 kHz 2.5 kHz
Hi EQ 12 kHz 12 kHz 12 kHz
Foot switch Digital effect mute: ON/OFF Digital effect mute: ON/OFF; Digital effect mute: ON/OFF;
tap delay tap delay
Microphone Preamp E.I.N.
150 ohms terminated, max gain <-122 dBm <-122 dBm <-122 dBm
Power Consumption 220 Watts 300 Watts 400 Watts
(Average Maximum)
Power Requirement 100-120VAC, 220-240VAC, 100-120VAC, 220-240VAC, 100-120VAC, 220-240VAC,
(depends on regions) 50/60 Hz 50/60 Hz 50/60 Hz
Net Weight 10.5 kg (23.1 lbs) 11 kg (24.2 lbs) 12 kg (26.4 lbs)
Dimensions (W x H x D) 474x348x340mm 474x348x340mm 474x348x340mm
(19”x14”x13”) (19”x14”x13”) (19”x14”x13”)

PHONIC CORPORATION POWERPOD 745 / 865 / 885 User's Manual page 17

BLOCK DIAGRAMS
POWERPOD 745

page 18 POWERPOD 745 / 865 / 885 User's Manual PHONIC

 POWERPOD 865 / 885

PHONIC CORPORATION POWERPOD 745 / 865 / 885 User's Manual page 19