Owner’s Manual

Guitar Amplifier

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY” and Owner’s Manual (p. 12)). After reading, keep
the document(s) where it will be available for immediate reference.

© 2022 Roland Corporation

 Panel Descriptions
Top Panel
1 2 4 5 6 7 8 10 12 13

3 9 11

1 GUITAR jack/STEREO IN L, R jack 5 [VOLUME] knob

Connect your electric guitar, mic, multi-effect unit, effect units with Adjusts the volume before equalization and effects are applied.
stereo outputs or other such devices here.
When inputting in stereo, set the amp type to “STEREO IN”. 6 EQUALIZER
* If you connect the L jack from your device to this unit using the
“STEREO IN” setting, only the L-side output is heard. [BASS] knob
Adjusts the sound level of the low-frequency range.
2 [AMP TYPE] knob
Selects the amp type. [MIDDLE] knob
Type Explanation Adjusts the sound level of the middle-frequency range.
The sound of an original amplifier with built-in
acoustic simulator.
[TREBLE] knob
ACOUSTIC SIM
This transforms your electric guitar sound into that Adjusts the sound level of the high-frequency range.
of a clear, delicate-sounding acoustic guitar.
Models the Roland JC-120. This gives a clean sound
with a distinct high end. 7 [EFFECTS] knob
JC CLEAN You can achieve an even more effective tone when Use this knob to switch between effects such as chorus or flanger,
using this type in combination with a external depending on the knob’s position.
effect unit.
This models a Fender Deluxe Reverb. Type Explanation
Usable for a wide range of genres including OFF Effects are not applied.
US COMBO Chorus is an effect that creates a beautiful tonal
country, blues, jazz and rock music. This type
features a characteristically bright high-end sound. CHORUS spaciousness and depth by adding a slightly
This is a model of the Vox AC-30TB, the rock modulated sound.
amplifier that created the Liverpool sound of the FLANGER Gives a twisting, flanged character to the sound.
BRIT COMBO 1960s. Gives the original sound a whooshing, swirling
PHASER
Offers a broad range of sounds, from clean to character by adding a slight phase variance.
overdrive. TREMOLO Creates a cyclic change in volume.
A model of the Marshall 1959 sound, with inputs I Adds pitches at lower octaves to the original sound.
and II connected in parallel. HEAVY OCTAVE This also applies when you play chords, adding
HI-GAIN STACK This is a rock amp distinctive for its fat, solid thickness to the chords you play.
sound, with a smooth tone that extends into the
“presence” frequency range.
A model of the lead channel of the Peavey 8 [DELAY/REVERB] knob
EVH5150.
METAL STACK Use this knob to switch between effects such as delay or reverb,
This gives you a lead sound that’s distinctively thick
with a long sustain. depending on the knob’s position.
Models the sound of the Channel 2 MODERN Mode Type Explanation
on the MESA/Boogie DUAL Rectifier. OFF Effects are not applied.
EXTREME
This type gives you a wide range of lead sounds for DELAY Changes the delay time and effect.
music such as thrash metal and grunge. Adjusts the volume of the reverb.
REVERB
MIC Select this if you’ve connected a microphone.
A reverb that models a spring reverb, with the
Select this when connecting a multi-effect unit or SPRING characteristic sound of running the signal through
STEREO IN
effect unit with stereo outputs. springs.

3 [MEMORY] button 9 [TAP] button

Use the memory feature to store three different sets of knob Sets the delay time. When you press this button two or more times,
configurations for each amp type (p. 6). the delay time is set to the interval between presses.

4 [GAIN] knob
Adjusts the gain (amount of distortion).

2
 Panel Descriptions

10 LOOPER indicator
You can use the looper by connecting a footswitch (FS-5U, FS-6,
FS-7; sold separately) to the FOOT SW jack (p. 7).

11 PHONES/REC OUT jack

Connect your headphones or headset mic here.
Adjust the headset mic volume with the [MIC VOL] knob.
* No sound is played through the unit’s speaker while the PHONES/
REC OUT jack is in use.
* You may hear feedback with some headset mics if you raise the
volume too much. Also keep in mind that feedback may occur
between the headset mic and the speakers connected to the LINE
OUT jacks.
* Turn down the [MIC VOL] knob when plugging or unplugging a
cable into the PHONES/REC OUT jack. Also, make sure that the plug
is inserted fully into the jack. If a plug is not fully inserted with the
volume turned up, an unpleasant loud noise may be heard.
* Pin arrangement for PHONES/REC OUT jack (stereo, CTIA)

L
R
GND
MIC

12 [MASTER] knob
Adjusts the output volume.

13 POWER indicator
This indicator lights when the unit is turned on.
* When operating on battery power, the unit’s POWER indicator
blinks if the batteries are nearly depleted. Replace the batteries as
soon as possible (p. 5).

3
Panel Descriptions

Rear Panel (Connecting Your Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.

2 3 4 5 6 7
1
8

Plugs shown in this illustration

1/4” phone (mono)

1/4” phone (stereo)

4-pole mini phone

1 [POWER] switch 4 Bluetooth ADAPTOR jack

Turns the power of this unit on/off (p. 5). Connect the Bluetooth® Audio MIDI Dual Adaptor (model:
BT-DUAL, sold separately) to wirelessly play back music from your
2 DC IN jack mobile device such as a smartphone or tablet (hereafter “mobile
device”), or to edit the effects using an app on your mobile device
Connect the included AC adaptor to this jack. (p. 8).
* Use only the AC adaptor that came with this unit.

3 USB port
Connect a commercially available USB 2.0 cable to play back and
record the sound from this unit on your computer. You can also use
dedicated software to edit the settings of the internal effects.

Playing back/recording the sound of this unit using your

computer, iPad or iPhone
Use the standard driver provided by the operating system.
When using a computer, you can also use the dedicated USB driver.
When connecting an iPad or iPhone, use a commercially-available
USB B type adaptor or cable.

Using the dedicated software

When using the dedicated software, use the dedicated USB driver.
Download the USB driver from the BOSS website. For details, refer
to the “Readme.htm” file included with the download.
https://www.boss.info/support/

Configuring the USB driver to use Using the DUAL CUBE LX’s dedicated software
USB driver What to do You can connect the DUAL CUBE LX via USB to your computer and
Set the [AMP TYPE] knob to “ACOUSTIC SIM”, use it with dedicated software. Using the dedicated software lets
Dedicated USB driver and turn on the power while holding down the you do the following:
[MEMORY] button.
Set the [AMP TYPE] knob to “JC CLEAN”, and turn
Standard OS USB
on the power while holding down the [MEMORY]
¹¹ Edit the effect settings.
driver
button. ¹¹ Back up effects and other internal settings, or restore settings
from a backup.
[LOOPBACK] switch
Download the dedicated software from the BOSS website (https://
When the [LOOPBACK] switch is on, the USB audio input sound can
www.boss.info/support/).
be sent back to your computer, iPad or iPhone.

4
 Panel Descriptions

5 FOOT SW jack
You can control the looper (p. 7) and switch the memories on/off Operating on Battery Power
(p. 6) using your foot by connecting a footswitch (BOSS FS-6, FS-7 or
FS-5U; sold separately). This unit can be used with alkaline batteries or rechargeable Ni-MH
* Pin assignment of FOOT SW jack batteries.
Type of battery Operating time
TIP
RING 2: HOT 1: GND 1: GND Alkaline batteries
2: HOT Approx. 8 hr.
SLEEVE (GND) Rechargeable Ni-MH
Approx. 10 hr.
batteries
3: COLD 3: COLD
* Times are approximate, and differ depending on the conditions of use.
* If you handle batteries improperly, you risk explosion and fluid
leakage. Make sure that you carefully observe all of the items related to
batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (the leaflet “USING THE UNIT SAFELY” and the Owner’s Manual
p. 12).
* When operating on battery power, the unit’s POWER indicator blinks
Stereo 1/4” phone typeÐ if the batteries are nearly depleted. Replace the batteries as soon as
Stereo 1/4” phone typeÐ 1/4” phone type x 2
possible.
Stereo 1/4” phone type * Sounds may distort easily or cut off when played at high volume as the
battery power is nearly depleted, but this is not a malfunction. In such
or or instances, replace the batteries or use the AC adaptor included with
FS-6 FS-7 FS-5U the unit.
RING TIP RING TIP

TIP Installing the Batteries

RING
1. Remove the battery cover on the bottom of this unit.
* When turning the unit over, be careful so as to protect the buttons
and knobs from damage. Also, handle the unit carefully; do not
drop it.

TIP Turns the memory function on/off. 2. Insert the batteries, making sure they face the right way.
RING Operates the looper.
+ +
+ +
6 LINE OUT jacks + +
You can connect an audio interface or recorder to record your + +
playing, or output the sound to a mixer.
You can also use dedicated software (p. 4) or an app on your mobile
device (p. 9) to adjust the output volume.

7 i-CUBE LINK/AUX IN jack Turning the Power On/Off

Use a stereo miniature phone type cable to connect your mobile Before turning the unit on/off, always be sure to turn the volume down.
device or other device to this jack, which lets you output its sound Even with the volume turned down, you might hear some sound when
from the speakers of this unit. switching the unit on/off. However, this is normal and does not indicate a
You can also use this unit as an audio interface for your mobile malfunction.
device (via i-CUBE LINK, p. 7). Use the mini cable (4-pole) included
with this unit to connect. 1. Make sure that the [MASTER] knob of this unit as well as
If your mobile device does not have an earphones jack, use a the volume of any connected devices are set to minimum.
commercially available adaptor.
* Pin arrangement for mini cable (4-pole; stereo, CTIA) 2. Turn on the power of this unit.
L
R
GND
MIC

[LOOPBACK] switch
By turning the [LOOPBACK] switch on, you can send the input
sound from the i-CUBE LINK/AUX IN jack back to your mobile
device. 3. Turn on the power of the devices connected to the LINE
OUT and PHONES/REC OUT jacks.
8 Ground terminal
Connect this to an external earth or ground. This should be
4. Adjust the volume levels of the devices.
connected when necessary. * Before switching off the power, lower the volume on each of the
If you hear noise when connecting an electric guitar or another devices in your system and then turn off the power of this unit (the
external device, connect the ground terminal to reduce the noise. reverse of when you switch this unit on).

5
 Useful Functions
Using the Memories
You can use the memory feature to store the current settings of the knobs, in three different sets of knob configurations for each amp type.

Settings are saved for these knobs

Storing the Knob Settings to Memory

Here’s how to store the current knob positions to memory.

1. Press the [MEMORY] button to select the memory where the settings are to be stored.
Each press of the button cycles through the memory numbers (greenÓredÓorangeÓunlitÓgreen), and the LED color changes accordingly.

Button color or state Explanation

Unlit (off) The amp produces sound using the current knob settings.
Green (memory 1) The amp produces sound using the knob positions (settings) stored in
Red (memory 2) memory.
Orange (memory 3)

2. Turn the knob to the setting you like.

3. Hold down the [MEMORY] button for several seconds.
The [MEMORY] button blinks.
Once the settings are stored, the [MEMORY] button lights up continuously.
NOTE
¹¹ Once you store settings in a memory, any existing settings that were stored in that memory are lost.
¹¹ The settings you store can be lost if you take the unit in for repair or due to equipment failure, incorrect operations or other such causes. To
avoid the nuisance of losing your data, back up the important data you’ve stored in the unit, or write the settings down by hand. You can use the
dedicated software (p. 4) or an app on your mobile device (p. 9) to back up the settings stored on this unit.

Recalling a Memory
Here’s how to recall the knob settings that are stored in memory.

1. Turn the [AMP TYPE] knob to select the amp type.

2. Press the [MEMORY] button to select the memory to recall.
This changes the unit’s knob settings to the settings stored in the memory you selected.
* Note that the volume may change abruptly when switching between memories, depending on the settings stored in the memories.
MEMO
¹¹ If you move a knob after recalling a memory, the setting or value for that knob changes to the knob’s current position.
Once the knob’s actual position matches the position that’s stored in memory, the [MEMORY] button immediately goes dark.
¹¹ You can connect a footswitch (FS-5U, FS-6, FS-7; sold separately) to the FOOT SW jack to turn the memory on/off (green (memory 1) Ð unlit) (p. 5).
You can also use the dedicated software (p. 4) or an app on your mobile device (p. 9) to switch between green (memory 1) and red (memory 2),
switch between different amp types and otherwise freely customize the settings.

6
 Useful Functions

Using the Looper

You can use the looper by connecting a footswitch (FS-5U, FS-6, FS-7; sold separately) to the FOOT SW jack.
You can record up to 90 seconds (in mono) and play back the recorded section over and over. You can also layer additional performances with the recording
as it plays back (overdubbing). This lets you create real-time backing performances on the fly.
* The factory default setting is set to a maximum of 45 seconds (stereo). With the dedicated software (p. 4) or mobile device app (p. 9), you can select up to
a maximum of 90 seconds (mono).

Recording Loop playback Overdubbing

Recording starts. The loop plays back. Record additional layers
Press the footswitch Pressing the footswitch while the loop plays back.
(connected via the ring) to (connected via the ring) Press the footswitch
switch to playback, at the switches to overdubbing. (connected via the ring) to
point where you want to switch to playback.
loop.

Stop/clear
If you press the footswitch (connected via the
ring) twice in one second, the looper stops.
Hold for two seconds or longer to clear the
phrase.

* Once you reach the maximum available recording time, the unit automatically switches to playback mode.
* Anything you record is lost once you turn off the power.

LOOPER indicators
Indicator Explanation
REC Lights up during recording
PLAY Lights up during playback, and blinks when stopped
DUB Lights up while overdubbing

Using This Unit with Other Mobile Devices (i-CUBE LINK)

With the “i-CUBE LINK” feature, you can connect your mobile device with the included mini cable (4-pole) and play back audio from that device, at the same
time that the sound inputted into this unit is sent to the mobile device.
Use this to play back or record the sound inputted into this unit on your mobile device by means of an app, or to livestream your performance.
When using the built-in speakers When using a headset mic or Bluetooth audio

Mobile device app Mobile device app

Audio input Audio from mobile device Audio from mobile device

Bluetooth audio
Audio input

or

Headset mic audio

Turn the [LOOPBACK] switch on to send the input sound from the Turn the [LOOPBACK] switch on to play back or record the sound
i-CUBE LINK/AUX IN jack back to your mobile device. from your headset mic or Bluetooth audio using a mobile device.

For details on i-CUBE LINK and on mobile device apps that can use i-CUBE LINK, visit the BOSS website.
https://www.boss.info/

7
 Wireless Connection with a Mobile Device
Here’s what you can do when the BT-DUAL (sold separately) is connected
to the DUAL CUBE LX. Registering a Mobile Device (Pairing)
¹¹ Play music wirelessly from a mobile device
“Pairing” involves registering the mobile device that you want to use with
¹¹ Edit the effects using an app on your mobile device the DUAL CUBE LX (making the two devices recognize each other).
¹¹ Control the volume and other parameters from an EV-1-WL wireless Here we’ll configure the settings so that music data saved on your mobile
MIDI expression pedal (sold separately) device can be played wirelessly via the DUAL CUBE LX.
* Note that the DUAL CUBE LX does not offer Bluetooth functionality. MEMO
You’ll need to attach the BT-DUAL (sold separately) to use Bluetooth.
The following explanation is only one example. For details, refer to
the owner’s manual of your mobile device.

Attaching the BT-DUAL 1. Turn on the power of the DUAL CUBE LX.
Attach the BT-DUAL to the Bluetooth ADAPTOR connector of the 2. Place the mobile device that you want to connect close to
DUAL CUBE LX. the DUAL CUBE LX.
1. Power down the DUAL CUBE LX and unplug the AC 3. Hold down the pairing button on Bluetooth indicator
adaptor from the AC outlet. the BT-DUAL until the Bluetooth
indicator blinks rapidly.
2. Remove the cover and screw from the Bluetooth
ADAPTOR connector on the rear panel. 4. Turn on the Bluetooth function of the
mobile device.

MEMO
This explanation uses the iPhone as an example. For details, refer to
3. Attach the BT-DUAL and fasten the screw that you the owner’s manual of your mobile device.
removed in step 2 in place. 5. Tap “DUAL CUBE Audio”, shown on the Bluetooth device
screen of your mobile device.
This pairs the BT-DUAL with your mobile device. When pairing
succeeds, “DUAL CUBE Audio” is added to the list of “Paired Devices”
on your mobile device.
* If you don’t complete the pairing within a certain time, the
Bluetooth indicator goes dark and the unit exits pairing standby
mode.

NOTE Connecting an Already-Paired Mobile Device

¹¹ Be sure to use only the screw that was originally mounted on the
Bluetooth ADAPTOR connector. If you use a different screw, the unit
may malfunction.
1. With the BT-DUAL’s Bluetooth indicator off, press the
pairing button.
¹¹ Do not touch any of the printed circuit pathways or connection
terminals. 2. Turn on the Bluetooth function of the mobile device.
¹¹ After you have attached the BT-DUAL, check again whether it is
properly installed.

Listening to Sound via Wireless

Connection with a Mobile Device MEMO
¹¹ If you were unable to connect using the steps above, tap
“DUAL CUBE Audio”, displayed in the Bluetooth device screen of the
mobile device.
Bluetooth® Audio ¹¹ To disconnect, press the pairing button on the BT-DUAL to make
the Bluetooth indicator go dark, or turn off the mobile device’s
With the DUAL CUBE LX, you can use Bluetooth audio functionality to Bluetooth function.
listen to music or music video played back on a mobile device through
this unit’s speakers.
Adjusting the Volume
1. Adjust the volume on the mobile device.
Adjust the volume of Bluetooth audio.

8
 Wireless Connection with a Mobile Device

Controlling the DUAL CUBE LX from a Disabling Bluetooth Functionality

Mobile Device App If you want to disconnect the Bluetooth connection between the BT-DUAL
and your mobile device, disable Bluetooth functionality.
Use the “DUAL CUBE LX Editor” app to edit effects and save settings on When this unit is not connected to the mobile device via Bluetooth, we
this unit. recommend you turn off Bluetooth to save on battery power.
By connecting an EV-1-WL wireless MIDI expression pedal
(sold separately), you can control the volume and other parameters. 1. Press the pairing button on the BT-DUAL.
For details on the DUAL CUBE LX Editor, see the BOSS website. The Bluetooth indicator goes dark.
https://www.boss.info/

Connecting to the App

Here are the settings to make in order to use an app on your mobile
device.
* Make the connection from the app’s settings, not from your mobile
device’s Bluetooth settings.

1. Turn on the power of the DUAL CUBE LX.

2. Place the mobile device that you want to connect close to
the DUAL CUBE LX.

3. Turn on the Bluetooth function

of the mobile device.

* When connected to Bluetooth audio, the Bluetooth indicator on the

BT-DUAL lights up. Note that the unit has not finished connecting
with the app at this time.
MEMO
This explanation uses the iPhone as an example. For details, refer to
the owner’s manual of your mobile device.

4. In the app’s settings, connect to DUAL CUBE MIDI.

NOTE
Do not tap “DUAL CUBE MIDI” shown in the Bluetooth settings of
the mobile device.

Troubleshooting (Troubles with Bluetooth Functionality)

Problem What to check and do Page
The Bluetooth function is enabled when you press the BT-DUAL’s pairing
button.
Bluetooth Audio:
“DUAL CUBE” does not show up in the The Bluetooth function might be A device named “DUAL CUBE Audio” appears. p. 8
Bluetooth device list on my mobile device turned off (disabled).
Connected to an app:
A device named “DUAL CUBE MIDI” appears.
Check these settings from within the app, such as the DUAL CUBE LX Editor.
If your mobile device’s Bluetooth Deregister the device in the mobile device’s Bluetooth settings. Turn the
device list shows “DUAL CUBE” Bluetooth function off and then on again, and try pairing again.
Can’t connect to Bluetooth audio If your mobile device’s Bluetooth p. 8
Turn the mobile device’s Bluetooth function off and then on again, and initiate
device list does not show
pairing from the DUAL CUBE LX to re-establish pairing.
“DUAL CUBE”
Remove the “DUAL CUBE MIDI” device first that was registered on your mobile device, turn the mobile device’s
Can’t connect to an app
Bluetooth function off and then back on, and then connect using the settings in the app (DUAL CUBE LX Editor).
In your mobile device’s Bluetooth setting
Make the connection from the settings of the app (DUAL CUBE LX Editor), not from your mobile device’s Bluetooth
screen, you tap “DUAL CUBE MIDI” but can’t
settings.
connect to the app
p. 9
You cannot connect simply by press the pairing button on the BT-DUAL.
You pressed the BT-DUAL’s pairing button,
but can’t connect to the app In the Bluetooth settings of your mobile device, turn the Bluetooth function on, and then connect from the settings of
the app (DUAL CUBE LX Editor).
If the connection breaks immediately after it is established, turning the mobile device’s Bluetooth switch off and then
Can’t connect to a paired mobile device
on again may fix the connection.

MEMO
If you’ve checked these points and the problem still occurs, please refer to the BOSS support website.
https://www.boss.info/support/
9
 Restoring the Factory Settings
Here’s how to restore the settings of the to their factory-set condition (factory reset).
MEMO
You can use the dedicated software (p. 4) or an app on your mobile device (p. 9) to back up the settings stored on this unit.
To save the settings, use the dedicated software or app on your mobile device to perform a backup.

1. Set the [AMP TYPE] knob to “STEREO IN”, and turn on the power while holding down the [MEMORY] button.
The [TAP] button blinks.

2. Press the [TAP] button.

The RECÓPLAY indicators repeatedly blink in sequence. When the blinking stops, all of this unit’s settings return to the factory-set state.
NOTE
Don’t turn off the power while the factory reset is in progress.

Note when using an already-paired iOS device

After executing a factory reset, you’ll need to do the following.
1
Disconnect “DUAL CUBE MIDI”.

DUAL CUBE MIDI

DUAL CUBE MIDI

2
Turn off.

For details, refer to the owner’s manual of your iOS device.

Block Diagram
i-CUBE LINK OUT
USB OUT
INPUT SPEAKER OUT POWER AMP

GUITAR / EFFECTS, SPEAKER

PRE AMP EQ
STEREO IN L, R DELAY / REVERB STEREO
MASTER

DIRECT IN LOOPER MUTE

DIRECT OUT ( DRY OUT )
INPUT PHONES / REC OUT
STEREO
Bluetooth ADAPTOR CTIA
STEREO
HEADSET MIC
i-CUBE LINK / AUX IN
STEREO
i-CUBE LINK OUT (MONO) CTIA
LOOPBACK

FROM HEADSET MIC LINE OUT

STEREO
MIC VOL i-CUBE LINK OUT
LOOPBACK (MONO)
FROM i-CUBE LINK OUT
USB
PRIMARY ( Windows )
INPUT 1/2, OUTPUT 1/2 ( Mac )

TO DIRECT IN USB
SECONDARY ( Windows )
FROM DIRECT OUT INPUT 3/4, OUTPUT 3/4 ( Mac )

* Dedicated USB driver only

10
 Main Specifications
Rated Power Output 10 W (5 W + 5 W)
GUITAR/STEREO IN L, R: -10 dBu (1 MΩ)
Nominal Input Level
i-CUBE LINK/AUX IN: -20 dBu (15 kΩ)
Nominal Output Level LINE OUT L/MONO, R: -10 dBu
Speakers 10 cm (4 inches) x 2
[POWER] switch
[AMP TYPE] knob (ACOUSTIC SIM, JC CLEAN, US COMBO, BRIT COMBO, HI-GAIN STACK, METAL STACK, EXTREME, MIC, STEREO IN)
[MEMORY] button
[GAIN] knob
[VOLUME] knob
[BASS] knob
[MIDDLE] knob
Controls [TREBLE] knob
[EFFECTS] knob (CHORUS, FLANGER, PHASER, TREMOLO, HEAVY OCTAVE)
[DELAY/REVERB] knob (DELAY, REVERB, SPRING)
[TAP] button
[MIC VOL] knob
[MASTER] knob
[LOOPBACK] switch (i-CUBE LINK/AUX IN)
[LOOPBACK] switch (USB )
POWER
MEMORY
TAP
Indicators
REC
PLAY
DUB
GUITAR jack/STEREO IN L, R jacks: 1/4-inch phone type
PHONES/REC OUT jack: Stereo Miniature phone type (Stereo, CTIA)
i-CUBE LINK/AUX IN jack: Stereo Miniature phone type (Stereo, CTIA)
LINE OUT L/MONO, R jacks: 1/4-inch phone type
Connectors
FOOT SW jack: 1/4-inch TRS phone type
Bluetooth ADAPTOR connector: Dedicated connector
USB port: USB B
DC IN jack
AC adaptor (DC 9 V)
Power Supply Alkaline battery (AA, LR6) x 8
Ni-MH battery (AA, HR6) x 8
Current Draw 360 mA
Alkaline battery: Approximately 8 hours
Ni-MH battery: Approximately 10 hours (*1)
Expected battery life
under continuous use
*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
341 (W) x 162 (D) x 215 (H) mm
Dimensions
13-7/16 (W) x 6-7/16 (D) x 8-1/2 (H) inches
Weight (excluding AC 3.3 kg
adaptor) 7 lbs 5 oz
Owner’s Manual
Leaflet “USING THE UNIT SAFELY”
Accessories AC adaptor
Power cord
Mini cable (4-pole miniature phone type)
Footswitch: FS-5U, FS-6, FS-7
Options
Bluetooth® Audio MIDI Dual Adaptor (Model: BT-DUAL)
(sold separately)
Wireless MIDI Expression Pedal: EV-1-WL

* 0 dBu = 0.775 Vrms

* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.

11
 USING THE UNIT SAFELY
WARNING CAUTION
Use only the supplied AC adaptor and the correct Keep small items out of the reach of children
voltage To prevent accidental ingestion of the
Be sure to use only the AC adaptor parts listed below, always keep them out
supplied with the unit. Also, make of the reach of small children.
sure the line voltage at the installation • Removable Parts
matches the input voltage specified on Bluetooth ADAPTOR cover, screw (p. 8)
the AC adaptor’s body. Other AC adaptors
may use a different polarity, or be designed for a Handle the ground terminal carefully
different voltage, so their use could result in damage, If you remove the screw from the ground
malfunction, or electric shock. terminal, be sure to replace it; don’t leave
it lying around where it could accidentally
Use only the supplied power cord be swallowed by small children. When
Use only the attached power cord. Also, refastening the screw, make that it is
the supplied power cord must not be firmly fastened, so it won’t come loose.
used with any other device.
Take care not to get burned
Batteries may reach a high temperature;
Turn the unit off before installing BT-DUAL please be careful to avoid burning
Before installing the BT-DUAL, you yourself.
must first always turn off the DUAL CUBE LX
and unplug the AC adaptor.

IMPORTANT NOTES
Power Supply Additional Precautions Intellectual Property Right
• Place the AC adaptor so the side with the indicator • Any data stored within the unit can be lost as the • It is forbidden by law to make an audio recording,
faces upwards. The indicator will light when you result of equipment failure, incorrect operation, etc. video recording, copy or revision of a third party’s
plug the AC adaptor into an AC outlet. To protect yourself against the irretrievable loss of copyrighted work (musical work, video work,
data, be sure to make a backup of the data stored broadcast, live performance, or other work),
Power Supply: Use of Batteries within it; or you may prefer to write down the whether in whole or in part, and distribute,
• Sounds may distort easily or may cut off when needed information. sell, lease, perform or broadcast it without the
played at high volume as the battery power begins permission of the copyright owner.
• Roland assumes no liability concerning the
to fade, but this is normal and does not indicate a restoration of any stored content that has been lost. • Do not use this product for purposes that could
malfunction. In such instances, either replace the infringe on a copyright held by a third party. We
batteries or use the AC adaptor included with the • Do not use connection cables that contain a built-in assume no responsibility whatsoever with regard to
unit. resistor. any infringements of third-party copyrights arising
through your use of this product.
• If operating this unit on batteries, please use
alkaline batteries or Ni-MH batteries. • ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
• If operating this unit on batteries, please disconnect
the AC adaptor from this unit. • The Bluetooth® word mark is registered trademark
owned by Bluetooth SIG, Inc. and any use of such
Placement marks by Roland is under license.
• Depending on the material and temperature of the • This product includes third party open source
surface on which you place the unit, its rubber feet software.
may discolor or mar the surface. Copyright (c) 2009-2017 ARM Limited. All rights
reserved.
Repairs and Data Licensed under the Apache License, Version 2.0
(the “License”);
• Before sending the unit away for repairs, be sure to
You may obtain a copy of the License at
make a backup of the data stored within it; or you
http://www.apache.org/licenses/LICENSE-2.0
may prefer to write down the needed information.
Although we will do our utmost to preserve the • This Product uses the Source Code of μT-Kernel
data stored in your unit when we carry out repairs, under T-License 2.0 granted by the T-Engine Forum
in some cases, such as when the memory section (www.tron.org).
is physically damaged, restoration of the stored • Roland and BOSS are either registered trademarks
content may be impossible. Roland assumes no or trademarks of Roland Corporation in the United
liability concerning the restoration of any stored States and/or other countries.
content that has been lost.
• Company names and product names appearing
in this document are registered trademarks or
trademarks of their respective owners.

12