This document provides information about a 3ARR3, 3ARR22 type motor start potential relay. The relay is used to disconnect a start capacitor on induction motors. It has normally closed contacts and remains energized during motor run operation. The relay is calibrated for a specific motor application and has terminals and mounting options. It has endurance ratings and agency approvals. Appendices provide ordering information, coil specifications, mechanical forms, and mounting positions.
This document provides information about a 3ARR3, 3ARR22 type motor start potential relay. The relay is used to disconnect a start capacitor on induction motors. It has normally closed contacts and remains energized during motor run operation. The relay is calibrated for a specific motor application and has terminals and mounting options. It has endurance ratings and agency approvals. Appendices provide ordering information, coil specifications, mechanical forms, and mounting positions.
This document provides information about a 3ARR3, 3ARR22 type motor start potential relay. The relay is used to disconnect a start capacitor on induction motors. It has normally closed contacts and remains energized during motor run operation. The relay is calibrated for a specific motor application and has terminals and mounting options. It has endurance ratings and agency approvals. Appendices provide ordering information, coil specifications, mechanical forms, and mounting positions.
This document provides information about a 3ARR3, 3ARR22 type motor start potential relay. The relay is used to disconnect a start capacitor on induction motors. It has normally closed contacts and remains energized during motor run operation. The relay is calibrated for a specific motor application and has terminals and mounting options. It has endurance ratings and agency approvals. Appendices provide ordering information, coil specifications, mechanical forms, and mounting positions.
General Description A voltage sensitive, electromagnetic type motor starting relay with normally closed snap-action Potential Motor Start Relay contacts used to disconnect the start capacitor on 35A and 50A Rating capacitor-start, induction-run and capacitor-start, capacitor-run motors. The relay has a protective cover which eliminates the need for additional electrical and mechanical protection. A variety of mounting brackets are available. Terminals may be either Quick Connect Tab Type or Screw Type.
Typical Applications • Central air conditioner compressors • Submersible pump motors • Motors generally over 1/3 HP with start capacitors
Operation The relay is energized by a magnet coil electrically connected across the start winding of the motor and Endurance responds to the increase in start winding voltage as the • 100,000 to 500,000 operations motor accelerates from zero to the normal running (depending on load) speed. The relay contacts are actuated by the armature of the relay to disconnect the start capacitor at a speed where the motor has sufficient torque to bring it up to Mounting normal running speed. The relay remains energized • Mounting Bracket during the run operation of the motor, keeping the relay Select from available brackets in Appendix “C”. contacts open. When the motor is de-energized, the relay contacts re-close for the next motor start. • Mounting Position Each relay is designed for a specific application which Each relay is calibrated in the intended includes the coil rating for continuous run voltage and mounting position. Specify desired the pickup and dropout calibration for proper motor mounting position from Appendix “D”. starting.
Circuits If there is a terminal in position #6, it must be the same Terminals polarity as terminals #1, #2, and #4 to prevent possible • Quick Connect Type flashover. If there is no terminal in #6 position, #4 can 0.250” x 0.032” (6.3 mm x 0.8 mm) be either polarity. • Screw Type, Tin Plated Brass #8-32 Thread Electrical Ratings • Contacts 35 Amperes max, 50/60 Hz, break only (3ARR3) 50 Amperes max, 50/60 Hz, break only (3ARR22) • Continuous Coil Rating 60 Hz; 130 to 500 Volts 50 Hz; 117 to 470 Volts See Appendix “B” for Coil Groups and Ratings.
ZETTLER Controls, Inc. www.zettlercontrols.com
75 COLUMBIA • ALISO VIEJO, CA 92656 • PHONE: (949) 360-5840 • FAX: (949) 360-5839 • E-MAIL: SALES@ZETTLERCONTROLS.COM 12/09/19 3ARR3, 3ARR22 Type GENERAL OUTLINE DIMENSIONS
Application Procedure Use the part number scheme from Appendix “A” to create Agency Approvals part number requirements. UL File #SA 44129 CSA included in UL
Calibration Relay is factory calibrated for pickup and dropout voltages to match motor speed and torque curves for the specific application requirements. See Appendix “B” for calibrations available for each coil group.
ZETTLER Controls, Inc. www.zettlercontrols.com
75 COLUMBIA • ALISO VIEJO, CA 92656 • PHONE: (949) 360-5840 • FAX: (949) 360-5839 • E-MAIL: SALES@ZETTLERCONTROLS.COM
12/09/19 3ARR3, 3ARR22 Type APPENDIX A (Ordering Part Number)
Relay model number (Example: 3ARR3AA2A1)
3ARR
Mounting Position (#1 to #6) Appendix D
Coil Calibration (One or two letters) Appendix B
Coil Group (One or two digits) Appendix B
Mechanical Form (One or two letters)* Appendix C
Basic Model Type (3 or 22)**
* Mechanical Form per appendix C or assigned by the ZC Application Engineer as required.
** Basic Model Type is selected based on capacitor disconnect current ("3" for 35A) ("22" for 50A).
ZETTLER Controls, Inc. www.zettlercontrols.com
11/12/14 75 COLUMBIA • ALISO VIEJO, CA 92656 • PHONE: (949) 360-5840 • FAX: (949) 360-5839 • E-MAIL: SALES@ZETTLERCONTROLS.COM
12/09/19 APPENDIX B (Coil Group and Calibration)
12/09/19 ZC MOTOR START RELAY (3ARR3, 3ARR22) DATA
12/09/19 ZC MOTOR START RELAY (3ARR3, 3ARR22) DATA
12/09/19 ZC MOTOR START RELAY (3ARR3, 3ARR22) DATA
12/09/19 ZC MOTOR START RELAY (3ARR3, 3ARR22) DATA
12/09/19 3ARR3, 3ARR22 Type APPENDIX C (Mechanical Form)
