Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 6K views

    Mid 128 Pid98

    Uploaded by

    lampard
    This document provides diagnostic information for a Volvo excavator that is experiencing issues with its engine oil level sensor. It details 3 fault modes that could cause the sensor to trigger a low oil level warning, including a low actual oil level, a short circuit of the sensor signal line to ground, or an open circuit on the sensor signal or ground line. The recommended actions are to check the engine oil level, inspect the sensor for damage, and clear the fault code using the diagnostic tool to help identify the root cause.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mid 128 Pid98

    Uploaded by

    lampard
    6K views2 pages
    This document provides diagnostic information for a Volvo excavator that is experiencing issues with its engine oil level sensor. It details 3 fault modes that could cause the sensor to trigger a low oil level warning, including a low actual oil level, a short circuit of the sensor signal line to ground, or an open circuit on the sensor signal or ground line. The recommended actions are to check the engine oil level, inspect the sensor for damage, and clear the fault code using the diagnostic tool to help identify the root cause.

    Original Description:

    MID 128 PID98

    Original Title

    MID 128 PID98

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides diagnostic information for a Volvo excavator that is experiencing issues with its engine oil level sensor. It details 3 fault modes that could cause the sensor to trigger a low oil level warning, including a low actual oil level, a short circuit of the sensor signal line to ground, or an open circuit on the sensor signal or ground line. The recommended actions are to check the engine oil level, inspect the sensor for damage, and clear the fault code using the diagnostic tool to help identify the root cause.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6K views2 pages

    Mid 128 Pid98

    Uploaded by

    lampard
    This document provides diagnostic information for a Volvo excavator that is experiencing issues with its engine oil level sensor. It details 3 fault modes that could cause the sensor to trigger a low oil level warning, including a low actual oil level, a short circuit of the sensor signal line to ground, or an open circuit on the sensor signal or ground line. The recommended actions are to check the engine oil level, inspect the sensor for damage, and clear the fault code using the diagnostic tool to help identify the root cause.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Volvo Guided Diagnostics

    Date: Information Type:


    27-12-2011 Diagnostics Fault Codes 128: Engine ECU 98: Engine oil level
    Profile:
    EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB]
    EXC, EC210B LC (Volvo) [GB]

    MID128 Engine ECU;PID98 Engine oil level(128 PID98)


    128 PID98

    Reference

    Fault mode diagnosis

    Fault mode Detection conditions:The engine control unit (E-ECU) registers: low engine oil level (only
    FMI 1 detected when the engine is not running)
    Symptom: Possible causes:

     Red central warning  Low engine oil level


     Buzzer sounds continuously  Internal leakage
     Error message screen  Oil leakage from engine
     Defective sensor

    Action Check engine oil level


    Check the sensor for mechanical damages and cracks
    3021 128 PID98
    Check for external and internal leakage

    Fault mode Detection conditions:The engine control unit (E-ECU) registers: voltage too low (EB4/EB3)
    FMI 4 Symptom: Possible causes:

     Red central warning  Signal line short-circuited to


     Buzzer sounds continuously frame ground
     Error message screen  Defective sensor

    Action 3021 128 PID98

    Fault mode Detection conditions:The engine control unit (E-ECU) registers: current too low (EB4/EB3)
    FMI 5 Symptom: Possible causes:

     Red central warning  Open circuit on signal line


     Buzzer sounds continuously  Open circuit on ground line
     Error message screen  Signal line short-circuited to
    higher voltage
     Loose connection
     Defective sensor

    Action 3021 128 PID98


    Guided Diagnostics

    You might also like