MSDS Aluminium Sulphate 18-Hydrate
MSDS Aluminium Sulphate 18-Hydrate
MSDS Aluminium Sulphate 18-Hydrate
01
ALUMINIUM SULPHATE
For the full text of the H-Statements mentioned in this Section, see Section 16
Pictogram
Precautionary statement(s)
P280 Wear eye protection/ face protection.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. Immediately call a POISON
CENTER/doctor.
ALUMINIUM SULPHATE
3.1 Substances
Synonyms : Aluminium Sulphate Octahydrate, Aluminium Sulphate Hydrate.
Formula : Al2(SO4)3.18H2O
Molecular weight : 666.42 g/mol
CAS-No. : 7784-31-8
EC-No. : 233-135-0
Index-No. : 013-003-00-7
For the full text of the H-Statements mentioned in this Section, see Section 16.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
ALUMINIUM SULPHATE
ALUMINIUM SULPHATE
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC
and the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740, Size M)
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be
selected according to the concentration and amount of the dangerous substance at the specific
workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use (EN 143)
respirator cartridges as a backup to engineering controls. If th full-face supplied air
respirator. Use respirators and components tested and approved under appropriate
government standards such as NIOSH (US) or CEN (EU).
ALUMINIUM SULPHATE
10.1 Reactivity
No data available
Skin corrosion/irritation
Skin - Rabbit(Aluminium sulphate hydrate)
Result: No skin irritation
ALUMINIUM SULPHATE
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available(1,1,2,2-Tetrachloroethane)
Aspiration hazard
No data available
Additional Information
RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties
have not been thoroughly investigated.(Aluminium sulphate hydrate)
12.1 Toxicity
No data available
ALUMINIUM SULPHATE
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: 3260 IMDG: 3260 IATA: 3260
14.2 UN proper shipping name
ADR/RID: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Aluminium sulphate hydrate)
IMDG: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Aluminium sulphate hydrate)
IATA: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Aluminium sulphate hydrate)
14.3 Transport hazard class(es)
ADR/RID: 8 IMDG:8 IATA:8
14.4 Packaging group
ADR/RID: III IMDG: III IATA: III
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
Further information
No data available
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: e
ALUMINIUM SULPHATE
Flammability: 0
Reactivity: 0
Further information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as
a guide. The information in this document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties
of the product. PT. Smartlab Indonesia Corporation and its Affiliates shall not be held liable for any damage
resulting from handling or from contact with the above product. See www.sigmaaldrich.com and/or the reverse
side of invoice or packing slip for additional terms and conditions of sale.