Ice

The complete ice making plant consists of :
• Ammonia Compressors
• Condensers / Heat Exchangers
• Ammonia Receiver
• Cooling Coil / Evaporator
• Chilling Tank
• Paneling (Electrical Equipments)
Ammonia Compressors :
• Ammonia compressors designed with state-of-the-art technology for
industrial & commercial refrigeration and low temperature applications.
• Compressors are V belt driven and are suitable to operate with
Ammonia (NH3) & Freon [12 (CCl2F2), 22 (CHClF2)] as refrigerant.
• Robust construction, excellent performance and power saving features
and hallmarks of the products.
Condensers / Heat Exchangers :

Condenser is a heat transfer surface, generally which are divided in to three types.
• Air Cooled Condenser : Employ air as the condensing medium.

• Water Cooled Condenser : Utilize water to condense the refrigerant.
• Evaporative Condenser : Use both air and water as the condensing
medium. The function of the air is to increase the rate of evaporation by
carrying away the water vapor results from evaporation process.
Ammonia Receiver :
• Ammonia receiver can control the supply and demand relation
between the condensers and the evaporator, prevent excessive liquid
ammonia from staying in the condenser, maintain a certain level in the liquid
receiver to prevent gas from going into the liquid pipe line.
• The ammonia in the system can be stored in the ammonia receiver to
avoid loss of the ammonia before the refrigerating system is repaired.
Therefore, the volume of the ammonia storage should be considered before
buying it.
Cooling Coil / Evaporator :

• Cooling Coil / Evaporator is used as heat transfer surface in which a
volatile liquid is vaporized for the purpose of removing heat from
refrigerated space.
• V shape cooling coils are available in different sizes, usually custom
made to the individual applications.
Chilling Tank :
Chilling Tank consists of three parts:
1) Ice Tank
2) Insulation of Ice Tank
3) Ice Block
• Ice Tank:
Ice tanks are made of such material as wood, steel or concrete. As wooden
tanks do not last long enough and are liable to leak, they should preferably
be made of steel well coated with waterproof paint. Tanks made of
reinforced concrete are also recommended as superior to those of wood.
The ice tank contains the direct expansion coils, equally distributed
throughout the tank and these coils are submerged in brine. The tank is
provided with a suitable frame of hard wood for support the ice cans and a
propeller or agitator for keeping the brine in motion: the brine in the tank
acts as a medium of contact only, the ammonia evaporating in the ice coils
extracts the heat from the brine, which again absorbs the heat for the water
in the cans.
The tank itself should not be much larger than is necessary to hold the cans,
the coils, and the agitator. About two inches should be left between the
moulds and three inches between the pipes and the moulds.
• Insulation of Ice Tank:

Insulation of the ice tank is accomplished by using twelve to eighteen inches
of good insulating material on each of the sides and not less than twelve
inches under the bottom.
• Ice Block:
Commercial sizes of Ice cans vary with the weight of ice cakes required.
The cans are made to contain about 5% more than their rated capacity to
compensate for thawing.
Dimensions Gauge Gauge

Weight
Size of Size of Plain or of of Weight
per
Ice Width Length Height Band Grooved Steel, Steel, per Can
Can
Galv. Galv.
50 6 12 28 1.5 Plain 18 25 - -
50 8 8 31 1.5 Plain 18 25 - -
100 8 16 32 1.5 Plain 16 36 - -
300 11 22 48 1.5 Grooved 16 72 14 88
300 11 22 49 1.5 Grooved 16 74 14 90
300 11 22 50 1.5 Grooved 16 75 14 91
300 11.5 22.5 44 1.5 Grooved 16 69 14 84
300 11.5 22.5 46 1.5 Grooved 16 72 14 88
300 11.5 22.5 47 1.5 Grooved 16 73 14 89
400 11 22 63 2 Grooved 14 113 12 153
400 11.5 22.5 57 2 Grooved 14 106 12 146
Paneling (Electrical Equipments) :

The Neer Ice making plant is furnished with electrical control panel with
compressor starter, all necessary safety switches and
pressostats, Voltmeter, Ammeter, Temperature Sensor etc.
How we operate:
Applications:
Ice Making plants are used in different applications like :
• Fisheries
• Hospital
• Chemical
• Pharmaceutical
• Commercially used in different industrial applications
Industrial ice makers
Commercial ice cube makers improve the quality of ice by using moving water. The
water is run down a surface that is constantly at 32 degrees F because only water without
impurities will freeze at this temperature on a surface.[4] Water with impurities requires
lower temperatures to freeze and will continue to wash down the surface and through the
drain of a commercial ice maker. Air and undissolved solids will be washed away to such
an extent that in horizontal evaporator machines the water has 98% of the solids removed
resulting in very hard virtually pure, clear ice. In vertical evaporators the ice is softer,
more so if there are actual individual cube cells. Commercial ice machines can make
different sizes of ice like flakers, crushed, cube, octagon, and tube. [5]
When the sheet of ice on the cold surface reaches the desired thickness, the sheet is slid
down onto a grid of wires, where the sheet's weight causes it to be cut into the desired
shapes, after which it falls into a storage bin.

Ice

Uploaded by

Copyright:

Available Formats

Ice

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ice

Uploaded by

Copyright:

Available Formats

The complete ice making plant consists of :

Condensers / Heat Exchangers :

• Air Cooled Condenser : Employ air as the condensing medium.

Cooling Coil / Evaporator :

• Insulation of Ice Tank:

Dimensions Gauge Gauge

Paneling (Electrical Equipments) :

Industrial ice makers

You might also like